Multi 9 switchgear NSA, INS, NG125
|
|
|
- Annis Hudson
- 6 years ago
- Views:
Transcription
1 N interpact INS I. ON Installation and connection in the switchboard Multi 9 switchgear NSA, INS, NG % Description of device number per row (modules = 9 mm) E37025(MGA+BT) Multi 9 switchgear (2) O-OFF O-OFF vertical mounting, mounting on Multifix rail measurement units or Diazed fuses (Sweden) switchgear 40 A 48 modules 48 modules 3 x 48 modules switchgear 125 A 48 modules E20793(MGA+BT) Compact circuit breaker T R 125/160 A, vertical mounting, fixed, front connections, mounting on Multifix rail, toggle control NSA 125/160 Vigi NSA 125/ modules (3P) 14 modules (4P) 24 modules (3P) 27 modules (4P) NG A, vertical mounting, modular mounting on Multifix rail circuit breaker NG 125 Vigi NG 125 E39542(MGA+BT) NG Distribloc E32579(MGA+BT) Interpact INS Mg /160 A, vertical mounting, direct or extended front handle, mounting on Multifix rail INS 40/80 10 modules INS 100/ modules INS100/160 with long terminal shields 14 modules other devices INS + Distribloc Note: (1) See page 51. (2) When the row of devices is incomplete, use the divisible blanking strip (H = 46 mm, W = 1000 mm). 32
2 Installation Upstream connection Downstream connect./distribution vertical mounting cut-out add. top add. description add. add. description add. add. modules plate front front bottom mod. front mod. front E36997(MGA)/ E40178(BT) E36983(MGA)/E26781(BT) E36984(MGA)/E26781C(BT) required plate plate front plate plate plate H=50 mm E36985/E26781A x point-to-point wiring 0 to a single device: direct using cables 0 to a row of devices: point-to-point wiring 0 comb busbars 0 to a single device: direct to device 0 from busbars by 100A prefabricated connection assembly to a row of devices: point-to-point wiring 0 comb busbars 0 (100A prefabricated connection assembly for connection to busbars) by Multiclip 0 devices 40A point-to-point wiring 0 with cable straps 0 H = 30 mm with cable straps H = 30 mm H = 60 mm direct to device 50 mm 2 0 > 50 mm by Distribloc Distribloc 125A (12 mod) 0 Distribloc 160A (12 mod) 0 by multi-stage Distribution block 125A 14 circuits (10 modules) 0 17 circuits (14 modules) to a single device: direct to device using cables 50 mm 2 0 > 50 mm from busbars by 100A prefabricated connection assembly to a row of devices: comb busbars 0 (100A prefabricated connection assembly for connection to busbars) by Multiclip by Distribloc Distribloc 125A (12 mod) 0 Distribloc 160A (12 mod) 0 by multi-stage Distribution block 125A 14 circuits (10 modules) 0 17 circuits (14 modules) 0 with cable straps H = 30 mm H = 60 mm direct to device in bare cable connectors 0 direct to device using cables 70 mm direct to device using cable 95 mm 2 2 (1) (1) (1) (1) (1)
3 Installation and connection in the switchboard Metering and control devices Description of device number per row (width in 9 mm modules) E49953 E51048 E40505(MGA+BT) E40504(MGA+BT) E51054 LV/LV transformer 059 installation on slotted plate, ABL-6 until 400 VA metering mounting on Multifix rail and control Multi 9 meters device 5 mounting on front plate 72x72 NE meters device round body 6 square body 6 push-buttons push-buttons with lamps with lamps Ø 22.2 on front plate with knockouts 12 on blanking plate (72x72) (1) 12 Vigilhom Vigilhom TR22A, EM9 (vertical mounting) 1 TR x72 NE meters 6 NE 72x72 PLCs vertical mounting behind transparent front plate TSX 07 Nano PLCs TSX 17 Micro PLCs Note: (1) For holes in blanking plate 07347, used set of punches cat. no including Ø 22 and Ø 46. (2) transparent front plate. Front plates for metering devices E10319A(MGA+BT) front plate for signal lamp and push-button (2 mod.) E10319B(MGA+BT) front plate for measurement unit round body (3 mod.) square body (3 mod.)
4 Installation Upstream connection Downstream connect./distribution vertical mounting cut-out add. top add. description add. add. description add. add. modules plate front front bottom mod. front mod. front E36997(MGA)/ E40178(BT) E36983(MGA)/E26781(BT) E36984(MGA)/E26781C(BT) required plate plate front plate plate plate H=50 mm E36985/E26781A direct to device 0 direct to device or (2) (2) E10319C(MGA+BT) transparent front plate (4 mod.) (6 mod.) E10320(MGA+BT) front plate for Vigilohm (4 mod.) E11704(MGA+BT) blanking plates
5 Installation and connection in the switchboard Motor control device % Description of device mounting plate capacity E51051 LP contactor D series vertical mounting on Multifix rail, LP1/LP2-D09, D12, D18 with or without LA4, LA % E51046 E51188 E51051 E51046 E51188 vertical mounting on recessed Multifix rail, LP1/LP2-D09, D12 with LA1, LA4, LA8 (with LA2, LA3, LA6 DK1, LA6 DK2, mounting possible without front plate) LP1/LP2-D18 with LA1, LA4, LA8 (with LA2, LA3, LA6 DK1, LA6 DK2 mounting possible without front plate) LP1/LP2-D25, D32 with or without LA4, LA8 (with LA1, LA2, LA3, LA6DK1, LA6DK2, mounting possible without front plate) vertical mounting on recessed slotted plate, LP1/LP2-D09, D12 with LA1, LA4, LA8 (with LA2, LA3, LA6 DK1, LA6 DK2, mounting possible without front plate) LP1/LP2-D18 with LA1, LA4, LA8 (with LA2, LA3, LA6 DK1, LA6 DK2 mounting possible without front plate) LP1/LP2-D25, D32 with or without LA4, LA8 (with LA1, LA2, LA3, LA6DK1, LA6DK2, mounting possible without front plate) LC contactor vertical mounting on recessed Multifix rail, D series LC1/LC2-D09, D12 with or without LA4, LA8 LC1/LC2-D09, D12 with or without LA1, LA4, LA8, LA6 DK1, LA6 DK2 LC1/LC2- D18 D25 with or without LA1, LA4, LA8 LC1/LC2- D32 with or without LA4, LA8 vertical mounting on recessed Multifix rail, LC1/LC2-D09, D12, D18, D25, D32 with or without LA1, LA2, LA3, LA4, LA8, LA6 DK1, LA6 DK2. LC1/LC2-D40 with or without LA1, LA4, LA8, LA6-DK1, LA6/DK2 (with LA2, LA3, mounting possible without front plate) vertical mounting on recessed slotted plate, LC1/LC2-D09, D12, D18, D25, D32 with or without LA1, LA2, LA3, LA4, LA8, LA6 DK1, LA6 DK2. LC1/LC2-D40 with or without LA1, LA4, LA8, LA6-DK1, LA6/DK2 (with LA2, LA3, mounting possible without front plate) Note: If an LR2 or LR3 relay is used in conjunction with the contactor, it takes up an extra module requiring the addition of a plain bottom front plate LR2 or LR3 relays may not be mounted behind a front plate on LP1/LP2 D18 and D32 contactors. 36
6 Installation Upstream connection Downstream connect./distribution vertical mounting plain front add. top add. description add. add. description add. add. modules plate plate front bottom mod. front mod. front E36997(MGA)/ E40178(BT) E36984(MGA)/E26781C(BT) required plate front plate plate plate H=50 mm E51108 E36985/E26781A
7 Installation and connection in the switchboard Motor control device Description of device mounting plate capacity E51043 Contactor serie K vertical mounting on Multifix rail, LC1-K, LC7-K, LP1-K with or without LA1-KN, LA2-KT, LA4 LC2-K, LC8-K, LP2-K with or without LA1-KN, LA2-KT, LA4 E51055 E51189 vertical mounting on recessed Multifix rail, LC1-K, LC7-K, LP1-K with or without LA1-KN, LA2-KT, LA4 LC2-K, LC8-K, LP2-K with or without LA1-KN, LA2-KT, LA4 vertical mounting on recessed slotted plate, LC1-K, LC7-K, LP1-K with or without LA1-KN, LA2-KT, LA4 LC2-K, LC8-K, LP2-K with or without LA1-KN, LA2-KT, LA4 E51057 Starters vertical mounting on Multifix rail behind transparent front plate LH4-N1 (width 45 mm) LH4-N2 until 22 A (width 90 mm) E51058 vertical mounting on recessed slotted plate behind transparent front plate LH4-N1 (width 45 mm) LH4-N2 until 22 A (width 90 mm) LH4-N2 until 32 A (width 180 mm) Note: If an LR2 or LR3 relay is used in conjunction with the contactor, it takes up an extra module requiring the addition of a plain bottom front plate LR2 or LR3 relays may not be mounted behind a front plate on LP1/LP2 D18 and D32 contactors. 38
8 Installation Upstream connection Downstream connect./distribution vertical mounting plain front add. top add. description add. add. description add. add. modules plate plate front bottom mod. front mod. front E36997(MGA)/ E40178(BT) E36984(MGA)/E26781C(BT) required plate front plate plate plate H=50 mm E51108 E36985/E26781A or or with straps H = 30 mm 0 (only mounted on rail 07502)
9 Installation and connection in the switchboard Motor control device Description of device mounting plate capacity E51052 GV2 M (1) vertical mounting GV2-M GV2-M E51030 E51041 E51031 E51033 E51032 GV2 RT GV2 LE (2) GV2-M + GV1-L3 GV2-M + GV2-AE GV2-M + GV2-AE + GV1-L3 vertical mounting GV2-RT GV2-RT vertical mounting GV2-LE GV2-LE Note: (1) Mounting possible with lateral auxiliaries GV2-AD, AM, AN, AU, AS, AX. (2) Mounting possible with lateral auxiliaries GV2-AD, AM, AN, AU, AS. E50722 GV2-LE + GV2-AE GV2-LE + GV2-AE 40
10 Installation Upstream connection Downstream connect./distribution vertical mounting cut-out plain front description add. add. description add. add. modules plate front plate mod. front mod. front E36997(MGA)/ E40178(BT) E36983(MGA)/E26781(BT) required plate plate plate H=50 mm E (without connectors GV2-G09 and GV2-G05) with cable straps 0 H = 30 mm (without connectors GV2-G09 and GV2-G05) Multiclip 0 with cable straps 0 H = 30 mm H = 60 mm (without connectors GV2-G09 and GV2-G05) with cable straps 0 H = 30 mm (without connectors GV2-G09 and GV2-G05) Multiclip 0 with cable straps 0 H = 30 mm H = 60 mm (without connectors GV2-G09 and GV2-G05) point-to-point with cable straps 0 H = 30 mm (without connectors GV2-G09 and GV2-G05) Multiclip 0 point-to-point with cable straps 0 H = 30 mm H = 60 mm
11 Installation and connection in the switchboard Motor control device E % Description of device mounting plate capacity E51042 E51028 E51027 E51053 E51039 E51038 GV2 P (2) GV2 L (2) GV3 vertical mounting GV2-P, with or without GV2 AE GV2-P, with or without GV2 AE GV2-P, with or without GV2 AE + GV1 L3 GV2-P + GV2-AK00 vertical mounting GV2-L, with or without GV2 AE GV2-L, with or without GV2 AE GV2-L + GV2-AK00 vertical mounting through modular front plate GV3-M 40 A 48 mod. Note: (2) Mounting possible with lateral auxiliaries GV2-AD, AM, AN, AU, AS. 42
12 Installation Upstream connection Downstream connect./distribution vertical mounting cut-out plain front description add. add. description add. add. modules plate front plate mod. front mod. front E36997(MGA)/ E40178(BT) E36983(MGA)/E26781(BT) required plate plate plate H=50 mm E point-to-point point-to-point with cable straps 0 H = 30 mm H = 60 mm with cable straps 0 H = 30 mm H = 60 mm with cable straps 0 H = 30 mm H = 60 mm
13 Installation and connection in the switchboard Motor control device Description of device mounting plate capacity E51049 Integral 18, 32 horizontal mounting through cut-out front plate Integral 18 LD1-LB, LD5-LB 174 mm Integral 32 LD1-LC, LD4-LC, LD5-LC E51034 Circuit breaker/ contactor combination horizontal mounting, circuit breaker behind cut-out front plate circuit breaker: C60, C60 LMA 174 mm GV2 L, LE, M, P, RT, without GV2-AK00, without GV2 AE % E51047 contactors: serie K serie D: D09, 12, 18, 25, 32 with or without LA4, LA8 without LA1, LA2, LA3, LA6 DK1, LA6 DK2 Tego Power Tego Power 2 outgoing circuits 2 Tego Power 4/8 outgoing circuits 1 Note: The LA1 contact can only be mounted on the LC1-D09-D12. The LA2, LA3 and LA6 contacts can only be mounted without a front plate. 44
14 Installation Upstream connection Downstream connect./distribution vertical mounting plain front add. top add. description add. add. description add. add. modules plate plate front bottom mod. front mod. front E36997(MGA)/ E40178(BT) E36984(MGA)/E26781C(BT) required plate front plate plate plate H=50 mm E51108 E36985/E26781A
15 Installation and connection in the switchboard Motor control device Description of device mounting plate capacity E51035 GV2-M K (1) vertical mounting on Multifix rail GV2-M K with or without GV2-AE, AD, AM, AN with or without LA1, LA2 E51050 E51037 E51115 E51036 GV2-P D GV2-M K with or without GV2-AE, AD, AM, AN with or without LA1, LA2 + GV1-L3 vertical mounting on recessed Multifix rail GV2-P D with or without GV2-AE, AD, AM, AN with or without GV1-L3, GV2 AK00, LA1, LA2, LA3, LA8 vertical mounting on recessed slotted plate GV2-P D with or without GV2-AE, AD, AM, AN with or without GV1-L3, GV2 AK00, LA1, LA2, LA3, LA8 horizontal mounting on recessed slotted plate GV2-P D H = 180 mm with or without GV2-AE, GV2-AD, AM, AN with or without GV1-L3, GV2 AK00, LA1, LA2, LA3, LA8 Note: (1) Mounting possible with lateral auxiliaries GV2- AD, AM, AN, AU, AS, AX. 46
16 Installation Upstream connection Downstream connect./distribution vertical mounting plain front add. top add. description add. add. description add. add. modules plate plate front bottom mod. front mod. front required plate front plate plate plate H=50 mm E36997(MGA)/ E40178(BT) E51108 E51111 E with cable straps H = 30 mm H = 60 mm H 30 mm
17 Installation and connection in the switchboard Others devices Rc Description of device number per row E12705(MGA+BT) E30258(MGA+BT) E49751(MGA+BT) distribution Polybloc 4P 160 A, 6 circuits, (16 mod) 430 mm useful block Polybloc 4P 250 A, 9 circuits, (24 mod) 430 mm useful Polybloc 3P 250 A, 9 circuits, (18 mod) 430 mm useful Polybloc 4P 250 A, 12 circuits, (32 mod) 430 mm useful Distribloc 125 A, 13 circuits, (12 mod) Distribloc 160 A, 13 circuits, (12 mod) multi-stage dist.-block 125 A 14 circ (10 mod) multi-stage dist.-block 125 A 17 circ (14 mod) 430 mm useful 430 mm useful 430 mm useful 430 mm useful 4P multi-stage dist.-block 160 A 5 circ P multi-stage dist.-block 160 A 13 circ P multi-stage dist.-block 250 A 5 circ P multi-stage dist.-block 250 A 13 circ P multi-stage dist.-block 400 A 13 circ distribution installation on Multifix rail 430 mm useful (1) blocks installation on mounting plate on vertical rails 1000 mm useful (1) air conditioning IP 20 ventilation front plate Pc E14326((MGA+BT) front plate and or filter grill support E40546(MGA+BT) E40500 door lighting fluorescent lighting + door contact 1 system other devices on flat slotted plates useful dimensions (HxWxD) 200 x 440 x 140 mm useful dimensions (HxWxD) 550 x 440 x 140 mm useful dimensions (HxWxD) 750 x 440 x 140 mm useful dimensions (HxWxD) 950 x 440 x 140 mm useful dimensions (HxWxD) 1150 x 440 x 140 mm on recessed slotted plates useful dimensions (HxWxD) 200 x 420 x 160 mm useful dimensions (HxWxD) 350 x 420 x 160 mm Multistage distribution block in horizontal position useful dimensions (HxL) 550 x 420 mm (1) Space occupied by distribution blocks: Rc cross- width number of vertical section in mm modules occupied (mm 2 ) (for installation on rail 07503) Cables are fitted directly at the bottom of the switchboard 48
18 Installation Upstream connection Downstream connect./distribution vertical mounting cut-out add. top add. description add. add. description add. add. modules plate front front bottom mod. front mod. front E36997(MGA)/ E40178(BT) E36983(MGA)/E26781(BT) E36984(MGA)/E26781C(BT) verticaux plate plate front plate plate plate H=50 mm E36985/E26781A direct to device 0 direct to device to 6 (1) to point-to-point wiring 0 with cable straps H = 30 mm H = 60 mm point-to-point wiring 0 direct to device 0 point-to-point wiring 0 with cable straps H = 30 mm H = 60 mm point-to-point wiring 0 direct to device 0 1 direct to device 0 direct to device direct to device 0 direct to device
19 Installation and connection in the switchboard Others devices Slotted plates At rear of enclosure or cubicle Slotted plates may be installed directly at the rear of Prisma G/GX/GK enclosures, or on the functional chassis of Prisma GE enclosures and Prisma GR cubicles. Slotted plate description 1 slotted plate H = 200, W = 470 for enclosure or cubicle Useful dimensions: behind front plate = 140 mm. useful width: W = 440 mm. E56715 Slotted plate Recessed slotted plate Recessed slotted plates description recessed slotted plate 4 modules modules modules They provide best possible use of available depth. Useful dimensions: behind front plate = 160 mm. useful width:. E40578 Clip-on nuts Used for mounting various devices (contactors, transformers, etc.) on slotted plates. description 20 clip-on nuts M M M E56717 Pratic Practic adapters Clipped on slotted plates, Multiflix rails, symmetrical and asymmetrical rails. Accommodates terminal strips, terminal blocks, terminals, modular devices, etc. Also accommodates Prisma cable straps and may be used as a raiser D = 10, W = 27 mm. description 5 pratic adapters O-OFF O-OFF E16135(MGA+BT) Sliding nut A B E40513(MGA)/E36387(BT) 20 For fixing mounting plates or special devices to Multifix rails description 20 sliding nuts for Multifix rail Ø A Ø B M 3 M M 4 M M 5 M M 6 M
20 E Multifix rail Universal fixing rail as per standard EN for: clip-on mounting of modular units non-modular units, fitting by double-tapped nut sliding inside the rail. Suitable for Prisma system cable straps and Multiclip, Polybloc and Distribloc distribution blocks. description Multifix rail supplied with 2 fixing brackets W = 430 mm Multifix rail W = 430 mm supplied with 2 fixing brackets for depth adjustment, graduated to indicate directly the available space behind the front plate may be set to a 30 angle in bottom position Multifix rail with holes at each end for direct mounting W = 470 mm on the rear of the enclosure or cubicle 2 Multifix rails W = 1750 mm recessed Multifix rail fitted with 2 fixing brackets useful dimension behind front plate: 160 mm E56719 E56720 E support Supports used to advance a Multifix or symmetrical rail and set it at a 45 angle. description 2, 45 supports E40514(MGA)/E16139(BT) E40502(MGA)/E40146(BT) Switchboard lighting system The system lights the front panel of Prisma G/GX/GK enclosures, or Prisma GE enclosures and Prisma GR cubicles. It occupies one vertical module, i.e. 50 mm of the height of the switchboard. description fluorescent lighting + door contact Composition 1 neon light 1 door contact 1 fixing plate 1 one module front plate (50 mm). Electrical characteristics power: 15 W supply voltage: 230 V. E40500(MGA+BT) E40501(MGA+BT) 51
21 Installation and connection in the switchboard Reserve Description of device number per row E37021(MGA+BT) E40577(MGA+BT) reserve behind flat plain front plate H = 50 mm H = 100 mm H = 150 mm H = 200 mm H = 250 mm H = 300 mm H = 550 mm H = 750 mm H = 950 mm H = 1150 mm behind recessed plain front plate H = 300 mm H = 550 mm E37021(MGA+BT) behind transparent front plate H = 200 mm H = 300 mm 52
22 Installation Upstream connection Downstream connect./distribution vertical mounting cut-out add. top add. description add. add. description add. add. modules plate front front bottom mod. front mod. front required plate plate front plate plate plate H=50 mm E36997(MGA)/ E40178(BT) E36983(MGA)/E26781(BT) E36984(MGA)/E26781C(BT) E36985E/26781A Recessed front plate H = 300 E42676 E42673 E Recessed front plate H = 550 E
Compact NS 100/400 in the duct Interpact INS 250/400 in the duct Interpact INV 250/400 in the duct
push to trip Io Ir.8.9.9.93.7 1.88.95.63.85.98.5.8 1 Ir Im xin xio Ir Im a a.7.63.5.8.9 1 xin Io push to trip Ir.9.93.88.95.85.98.8 1 xio alarm 90 105 alarm 90 105 Im 5 6 4 7 3 8 2 10 xir Im 5 6 4 7 3
Catalogue G System Pack, wall mount and floor standing enclosures. Prisma Plus LV Switchboards Devised to save time
Catalogue G System Pack, wall mount and floor standing enclosures Prisma Plus LV Switchboards Devised to save time General contents Index 2 General presentation 8 Pack 10 17 General presentation Installation
Pan assemblies and installation accessories
Contents Section 10 Pan assemblies and installation accessories SP&N pan assemblies 124 SP&N door and cover 124 TP&N pan assemblies 125 TP&N door and cover 125 Multiclip busbar and Polybloc 126 Comb busbars
Build electrical installations more efficiently. Prisma Plus P Simple, functional systems for safe, upgradeable LV switchboards up to 3200 A
Build electrical installations more efficiently Prisma Plus P Simple, functional systems for safe, upgradeable LV switchboards up to 3200 A Develop your business efficiency w Switchboards that are safe
Prisma Plus System P Cubicles up to 4000 A
Low Voltage electric distribution Prisma Plus System P Cubicles up to 4000 A Catalogue 2012 Presentation PD390180_SE.eps IP30/31/55 cubicles b Applications: v indoor cubicles for main or subdistribution
Low voltage. NG to 160 A. Modular incoming circuit breakers and switch-disconnectors for DIN-panel installation.
Low voltage NG160 16 to 160 A Modular incoming circuit breakers and switch-disconnectors for DIN-panel installation Catalogue 2010 NG160 circuit breaker Ready to install NG160 General contents Presentation
Mini contactors. K 3-pole contactors for motor control, 6 and 9 A Utilisation category AC-3 Control circuit : a.c. a.c. control contactors (1)
K 3-pole contactors for motor control, 6 and 9 A Utilisation category AC-3 Control circuit : a.c. c LC-K060ii a.c. control contactors () Standard power ratings Rated Type of Instantaneous Basic reference.
Build electrical installations more efficiently. Prisma G Simple, functional systems for safe, upgradeable LV switchboards up to 630 A
Build electrical installations more efficiently Prisma G Simple, functional systems for safe, upgradeable LV switchboards up to 630 A Develop your business efficiency wit Switchboards that are safe With
XL 4000 metal free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3
modular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security
aesthetics c Elegant and robust design. c Colour easy to integrate in any environment. weatherproof & versatile enclosures multi-functional c Different solutions for: industrial control, electrical distribution,
Kaedra system PB102271
PB102271 Index General presentation 72 Selection guide 75 Enclosures for sockets 76 Enclosures with interface 77 Enclosures for modular devices 78 Universal enclosures 79 The functional plates 80 Accessories
The right solution for every home
Domae Household switchboards The right solution for every home Household guide 2002 Building a New Electric World. Household switchboards Domae The right solution for every home Household guide 2002 Building
EATON Transformer Module
www.eaton.com EATON Module Quick Start Standard Features When used with standard system, EATON Module provides isolated and Step-down 0/08/0 V AC outputs. Multiple Output receptacles: 0/08/0 V AC. 86-86000-0
Contactors and Contactor Assemblies
RT contactors, size S00 The product range at a glance The new generation is a complete, modular system family, logically designed right down to the last detail, from the basic units to the accessories.
3RV1 Circuit-Breakers
SIRIUS 3R Description Mountable accessories 3RV1 Circuit- Breakers Circuit-breaker S00 with mountable accessories 3 2 1 5.1 NSK-7715a 4 Circuit-breaker S0 with mountable accessories 1 7 3 5.2 2 6 NSK-7716a
IBM. Rack Installation Instructions
IBM Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following:
Go to:
System PKZ 0 ectors 08/019 Clip plate Standard version Short version C-PKZ0 072900 C-PKZ0-K 206740 One of the clip plates is always necessary when combining a PKZM0 manual motor prr and a S(E)00 magnetic
Rack Installation Instructions
Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following: v Two
MOTOR PROTECTION CIRCUIT BREAKERS
MOTOR PROTECTION CIRCUIT BREAKERS PAGE -2 PAGE -2 SMA Thermal trip adjustment ranges 9-32A (5 choices) Breaking capacity Icu at 400V: 50kA Suitable for mounting in consumer switchboards with minimum 58mm
Merlin Gerin LV switch-disconnectors Interpact 40 to 2500A
erlin Gerin LV switch-disconnectors Interpact 40 to 2500A 2 LV switch-disconnectors Interpact from 40 to 2500 A 4 Typical low-voltage applications 6 Compact from 80 to 1250 A 7 asterpact from 800 to 6300
NRG 19" ENCLOSURE SYSTEM. These enclosures have the most possible height and width for 19" enclosures available on the market.
NRG 19" ENCLOSURE SYSTEM No heat problems!...because the ventilation holes are at the SIDE of the enclosure, where they should be More space for your stuff! These enclosures have the most possible height
Electrical auxiliaries for ic60, iid, idpn Vigi, isw-na, RCA and ARA
for ic60, iid, idpn Vigi, isw-na, RCA and ARA b The electrical auxiliaries are combined with ic60 circuit breakers, iid residual current circuit breakers, remote tripping switch disconnector isw-na, RCA
Page Housing Plastic Metal Mounting DIN Rail or surface mount Panel or bracket mount Wattage Range 10W to 240W 7.5W to 240W 10W to 300W
Selection Guide Selection Guide PS5R Slim Line PS5R PS3L Operator Interfaces Communication & Networking PLCs NEW Models Appearance Automation Software Page 107 113 118 Housing Plastic Metal Mounting DIN
TeSys contactors. Pre-assembled. Pre-wired power connections. For connection by spring terminals. Instantaneous auxiliary contacts per contactor
s TeSys D, -pole changeover contactor pairs for control in category AC-, 0 A Pre-assembled. Pre-wired power connections. For connection by spring terminals. Utilisation category AC- Non-inductive loads
TeSys contactors Component parts for assembling reversing contactors for motor control or low speed - high speed starters
Component parts for assembling reversing contactors for motor control or low speed - high speed starters For 3-pole motor reversing contactors using identical contactors 810373 Contactors with screw clamp
Power-Style QED-2, Series 2 Low Voltage Switchboards
Power-Style QED-2, Series 2 Low Voltage Switchboards Catalog 2742CT1001 (Addendum to 2742CT9501R12/09) 2010 Class 2742 CONTENTS Description............................................. Page Features...................................................
Low Voltage electrical distribution Catalogue Prisma PH
Low Voltage electrical distribution Catalogue 2014 Prisma PH Prisma PH Contents Index 2 Electrical switchboards... Up to 4000 A 4 Prisma PH functional system 6 Switchgears 7 Linergy LGYE 8 Horizontal
Quick Start. This document describes how to install the Juniper Networks PTX5000 Packet Transport
PTX5000 Packet Transport Router Quick Start September 2017 Part Number: 530-066788 Revision 01 This document describes how to install the Juniper Networks PTX5000 Packet Transport Router. Contents Quick
Pragma. Doors reference if necessary. references. In perfect harmony. + customiser
modular surface mounted enclosure Robustness, aesthetic, ergonomics a range of enclosures designed to appeal a harmonious solution. Which enclosure fits you best? Type Rows Modules capacity I(n) number
RiLine Compact The smart power distribution system
RiLine Compact The smart power distribution system 2 Power distribution in a confined space Rittal are the leading suppliers of reliable power distribution and backup systems for controlgear. The new RiLine
InForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
for a perfect electrical installation. The range of rail-mounted terminal blocks
The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal
US Catalog July 2016 SMISSLINE TP
US Catalog July 2016 SMISSLINE TP SMISSLINE TP modular bus system Table of contents Description 2 Building a SMISSLINE TP assembly for UL 489 and UL 508 based solutions Overview and ordering information
Rapsody User's guide. Rapsody. User's guide. December Page 1
Rapsody User's guide December 2008 Page 1 Page 2 Contents Overview 5 Welcome to Rapsody 5 Homepage 6 Main project building steps 8 Define switchboard characteristics 10 Define the switchboard characteristics
This Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount.
This Datasheet for the IC697CHS790 Rack, 9 Slots, Rear Mount. http://www.cimtecautomation.com/parts/p-14771-ic697chs790.aspx Provides the wiring diagrams and installation guidelines for this GE Series
SIVACON 8MC, 8MF Cubicle Systems
SIVACON 8MC, 8MF Cubicle Systems /2 Introduction /3 8MC System Cubicles 1) /4 8MF System Cubicles 1) /5 Accessories Technical Information can be found at www.siemens.com/lowvoltage/support under Product
Low Voltage Catalogue Prisma G. Wall-mounted and floor standing enclosures for Electrical Distribution up to 630 A
Low Voltage Catalogue 2013 Prisma G Wall-mounted and floor standing enclosures for Electrical Distribution up to 630 A Overview To respond to increasing building requirements Improve the continuity of
1/2 Introduction. SIMBOX LC 1/7 Introduction 1/8 Flush-mounting and surfacemounting. 1/9 Dimensional drawings
Siemens AG 200 ALPHA SIMBOX Small Distribution Boards /2 Introduction /2 Introduction /3 Flush-mounting and hollow-wall distribution boards /4 Hood-type distribution boards /5 Accessories /6 Dimensional
New features in MTpro Table of contents
New features in MTpro 3.9.1.0 This document describes the new features of MTpro version 3.9.1.0 as compared to the previous version 3.9.0.1. Table of contents Table of contents... 1 1 Installation... 2
NEW Titan II A & B Distribution Boards
A Type Board Specification: Powder Coated Epoxy Resin Finish RAL 7035 Designed and built in the UK to BS EN 60439 Maximum busbar rating 125A Degree of protection IP3X to BS EN 60529 Blank gland plates
Cabinet Location Plan FIG.01. Cabinet Symbol Key. Air Handler. Air Handler SAN disk storage. SAN disk storage. option B. Not To Scale.
Cabinet front face - 09 Data Center Storage / Fit-Up Square Feet Square Meters Up Cabinet Symbol Key A Network Row A Network Substation B Server Cabinet A A A A4 A A6 A7 A8 A9 FIG.0 Data Center Square
Sivacon S4. Low-Voltage Switchboards. siemens.co.uk/tip
Product Managers and dedicated Business Development Managers are available to assist with all your enquiries. Technical presentations (Forms of Separation, Discrimination etc) available Site response capability
Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals
Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals Technical Data Type: KS 4401 KS 4402 KS 4403 KS 4461 KS 4404 KS 440 KS 4406 Article number * ) : 00636 00637 0063987 00614
ALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
Specification Sheet: HT SERIES
Specification Sheet: HT SERIES HT Series: High Specification 19 Enclosures Hi-tech Series of 19 enclosures, supplied in self assembly (flat pack) format for ease of transportation and storage. Manufactured
G12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
A-100G6 - Basic frame assembly diagram
doepfer System A - 100 Rack system A-100 G A-100G6 - Basic frame assembly diagram Parts: 1 Rail with lip, and with tapped hole strip inserted (with M3 threads). 2 Rail with lip, with three M3 hexagon nuts
Installing Power Modules
This chapter contains the procedures for installing cards and modules into the chassis after the chassis has been installed into a rack. This chapter also describes how to connect cables to RSP, RP, alarm,
www. ElectricalPartManuals. com
www ElectricalPartManuals com multi 9, systematically Terminal distribution applications are large: housing, service sector and industry, and the needs are constantly changing Reconciling security and
KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
Switches 6/1. 6/4 Introduction. 6/5 5TE8 control switches. 6/7 5TE4 8 pushbuttons. 6/9 5TE8 On/Off switches. 6/11 5TE1 switch disconnectors
6/4 Introduction 6/5 5TE8 control switches 6/7 5TE4 8 pushbuttons 6/9 5TE8 On/Off switches 4 6/11 5TE1 switch disconnectors 6 6/1 Switch to manual? Wherever electrical systems need to be switched on or
K-Line Mini - Contactors, Overload Relays and Accessories
K-Line Mini - Contactors, Overload Relays and Accessories Class 8502 CONTENTS Description...................................................... Page General Information...............................................
Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF48-RA and ZDF48-EA ZDF48-6RA and ZDF48-6EA
Panduit PreConfigured Industrial Distribution Frame (IDF) Installation Instructions Part Numbers ZDF48-RA and ZDF48-EA ZDF48-6RA and ZDF48-6EA Figure 1: Industrial Distribution Frame (IDF) Equipment Elevation
Discover TeSys U motor starters open version Starter-controller Non-reversing power bases
Discover TeSys U motor starters open version Starter-controller Non-reversing power bases DB0 DB0 LUB, LUB LUB 0, LUB 0 Two types of bases are available, each in two versions: b LUB, LUB Standard power
IT power distribution Power distribution units (PDU) Basic. Versions available:
IT PDU Basic 1 U With its IT PDU Basic 1 U, BACHMANN provides a huge choice of PDUs in a high-quality aluminium profile. With their extremely compact size of just 1 height unit, mm in depth and 1" in width,
EMS CX 3 - State and control module for Latching relays and Contactors
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax: 05 55 06 88 88 EMS CX 3 - State and control module Contents Pages 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation -
Technical System Catalog RiLine and Maxi-PLS
Technical System Catalog RiLine and Maxi-PLS Busbar systems Rittal offers a comprehensive system package with components for individual customer solutions. Wherever in the world they are used, Rittal busbar
APPLICATION SPECIFICATION. 1 of 22 B Millipacs HM 5 and 8 Row Right Angle Signal Receptacles Millipacs HM Right Angle Headers
1 of 22 B Millipacs HM 5 & 8 Row Receptacle & Right Angle Header Application Specification MPACS 5R RA RCP MPACS 8R RA RCP MPACS 5R RA HDR TABLE OF CONTENTS 2 of 22 B 1. OBJECTIVE...3 2. SCOPE...3 3. GENERAL...3
ALPHA AS NF Universal Modular Distribution Boards
ALPHA AS NF Universal Modular Distribution Boards ALPHA Distribution Boards ALPHA AS universal modular distribution boards provide you with the best framework for currents up to 800 A. The comprehensive
ict contactors EN 61095, IEC 1095 Interference
ict contactors DB23399 DB669 DB06604 Country approval pictograms EN 6095, IEC 095 ict contactors are available in two versions: b Contactors without manually-operated b Contactors with manually-operated.
Installing Cisco RP-Series PDUs
This chapter contains the following sections: Preparing to Install an RP-Series PDU, page 1 Installing a Zero-U PDU, page 1 Installing a 1RU or 2RU PDU, page 7 Preparing to Install an RP-Series PDU Before
MPS-Lite. A range of Blank and Connectorized panels in 3 standard widths to fit a 2RU / 3.50 vertical space, plus Adapters to accommodate them.
MPS-Lite A range of Blank and Connectorized panels in 3 standard widths to fit a 2RU / 3.50 vertical space, plus Adapters to accommodate them. A size panel (0.90 x 3.50 ) + more B Size panels (1.80 x 3.50
170 ADI VDC - 16 Pt. Discrete Input Module Base
24 VDC - 16 Pt. Discrete Input Module Base 11 At a Glance Purpose This chapter describes the 170 ADI 340 00 TSX Momentum I/O base. In This Chapter This chapter contains the following sections: For This
Cutter Option Installation Instructions
This kit includes the parts and documentation necessary to install the cutter option on the Zebra XiII, XiIII, and XiIIIPlus-Series printers. NOTE: The Cutter Option is not available for the 96XiIII. Adding
Small enclosure golf VF & VS
Small enclosure golf VF & VS The enclosure for flush or surface mounting installation When building or renovating residential buildings, compact solutions are often required for electrical installations.
Rack Installation Instructions
Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. Before installing your server in a rack cabinet, review the following guidelines:
PARTS LIST QUEST GT27 CNC LATHE Equipped with the GE Fanuc 21i-TB Control
PARTS LIST TP05916 QUEST GT27 CNC LATHE Equipped with the GE Fanuc 21i-TB Control Manual No. PL-107 Litho in U.S.A. Part No. PL -0009500-0107 January, 2004 TO ORDER REPLACEMENT PARTS Please provide the
US CATALOG SMISSLINE TP
US CATALOG SMISSLINE TP 2 SMISSLINE TP US CATALOG SMISSLINE TP US CATALOG 3 Table of contents 004 Description 005 012 for UL 508 and UL 489 based solutions Overview and ordering information 013 014 for
INSTRUCTION SHEET. Eaton Logic Controller ELCB Controllers
2010-12-10 5011699201-PBB1 Eaton Logic Controller ELCB Controllers INSTRUCTION SHEET [Applicable Controllers] ELCB-PB10 ELCB-PB14 ELCB-PB20 ELCB-PB30 ELCB-PB40 IL05001005E 002-1310020-02 Thank you for
920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
DMC2. Installation Guide Version 1.0. Area for main photograph. Area for insert photo. W: 46.1mm up to 79 mm H: 46.1mm
Area for main photograph Area for insert photo W: 46.1mm up to 79 mm H: 46.1mm X: 12.6mm absolute on page Y: 132.6mm abs on page This insert has a shadow DMC2 Installation Guide Version 1.0 Contents DMC2
Physical description of the safety modules
Implementing safety modules Physical description of the safety modules Introduction The TSX PAY 262 modules are in standard Premium PLC interface format. They occupy a single slot. Illustration The following
Metering Devices IQ 300
Effective: May 2001 Page 1 New Information Contents Description Page General Description......... 2 Specifications.............. 3 Field Wiring Connections.... 4 Page 2 Effective: May 2001 Applications
MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors
B Curve NC100H Supplementary Protectors Rating 1P 2P 3P 4P 80 MG27164 MG27175 MG27186 MG27197 MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors C Curve NC100H Supplementary Protectors
Switch Disconnectors, Main and EMERGENCY-STOP Switches
General data Overview Siemens G 2010 1 2 3 NSE0_01931b 4 5 6 7 1 uxiliary switch (3SB for 3K; 3KX for 3KE) 2 IP20 terminal cover (Operator side) 3 3K switch disconnector 4 rcing contacts (only for 3KE)
CADprofi Summary of main changes made to the program since the CADprofi version.
2018 Summary of main changes made to the program since the CADprofi 2017.01 version. Table of contents: - General commands (affects all modules) - CADprofi Architectural - CADprofi Electrical - CADprofi
Innovation on Medium Voltage Switchgear
Bruno Rivas, Guarulhos - Brazil, April 2015 Jornadas Técnicas de ABB en Chile Innovation on Medium Voltage Switchgear May 13, 2015 Slide 1 Application 13. Mai 2015 Slide 2 PPMV Brazil Factory Unigear Insourcing
IMS Control & EPR, We keep your motors running ABB s new control & protection devices up to 18.5 kw / 20 hp
IMS Control & EPR, 2010 01 29 We keep your motors running ABB s new control & protection devices up to 18.5 kw / 20 hp October 27, 2010 1SBC101089D0201 ABB s new control and protection devices Up to 18.5
RACKS AND CABLE MANAGEMENT
F/ F/ Assemblies, 11.0 W W W. S I E M O N. C O M SECTION CONTENTS RS3 Rack System........ 11.2 11.3 RS3 Series Horizontal Managers........... 11.3 F/ RS Rack System............................. 11.4 Extended
Fixed Blade External Louvre
Fixed Blade External Louvre Models FBL and FBL 75 Model FBL Aluminium Construction Bird Wire Guard Standard Two Flange Widths 25mm or 44mm Slim 50mm Section Profile Intake or Exhaust Applications Single
Altech s DIN Enclosures by
Altech s DIN Enclosures Since 98 Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
////// SUBSTATIONS. DC Switchgear Range. Type MBS (IEEE/ANSI standards)
////// SUBSTATIONS DC Switchgear Range Type MBS (IEEE/ANSI standards) GENERAL INFORMATION With a complete range of equipment and a leading expertise in DC traction power substations, Sécheron SA is a world
sirius Switching. Protecting. Starting. SIRIUS Product Overview
sirius Switching. Protecting. Starting. SIRIUS Product Overview S00 Design Direct-on-line starting Reversing duty Assembly kit for busbar mounting 0 mm: RA9 -C 0 mm: RA9 -D Consisting of: wiring kit busbar
EMS CX 3 - State and control module for Latching relays and Contactors
LEGRAND - BP30076 87045 LIMOGES CEDEX FRANCE Telephone: 05 55 06 87 87 Fax: 05 55 06 88 88 Contents Pages 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
CABINETS & ENCLOSURES FOR PREPAYMENT METERS
CABINETS & ENCLOSURES FOR PREPAYMENT METERS Solutions designed according to customer need, conceived for every type of prepayment meter: > Meters with keypad data entry terminal > Split meters with remote
Accessories Bus Terminals
Accessories s Connectors Lightbus Z1000 Z1010 Z1020 standard connector for 1,000 µm plastic fibre standard connector for 200 µm PCS fibre coupling for Z1000 PROFIBUS ZB3100 ZB3101 ZB3102 ZS1031-3000 ZS1031-3500
E-KAB N E SERIES WALL- MOUNTED DISTRIBUTION SWITCHBOARDS
E-KAB N E SERIES WALL- MOUNTED DISTRIBUTION SWITCHBOARDS DUVAR T P TES SAT KAB NLER www.eae-et.com.tr EAE Elektroteknik A.S. reserves rights to make changes within this document without prior notice. CONTENTS
Mylinc mechanisms switches and accessories Mylinc mechanisms dimmers and fan regulators 6755 01 6755 03 6755 95 6755 35 6755 30 6755 31 6755 40 6755 26 6755 97 6759 75 6759 69 Switches are ISI marked as
MBP68300 SERIES. AC-distribution, Static Switch and Manual Bypass for DAC60000 Dual Inverters. BPU69000 Dual External static switch Plug-in unit
MBP68300 SERIES AC-distribution, Static Switch and Manual Bypass for DAC60000 Dual Inverters Modular Construction AC-distribution 3pcs of MCBs Manual bypass switch BPU69000 Dual External static switch
Modular identification system
Modular identification system (xx00000675.tif).jpg Application To be able to locate a relay unit in a protective relay, the unit is identified with a unique item designation. Furthermore, the electrical
4-Post and Universal Telco Frame (UTF) Rack Mount Kit Installation Instructions
4-Post and Universal Telco Frame (UTF) Rack Mount Kit Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. Before installing your server
ASCO 920 Remote Control (RC) Switches
Maximum reliability and excellent value ASCO 920 Remote Control (RC) Switches ASCO 920 Remote Control Switch in Type Enclosure The ASCO 920 is designed as a feeder disconnect switch for load capacities
APES-14 HD-6500 & HD-7000 Version Operator s Training Manual
APES-14 HD-6500 & HD-7000 Version Operator s Training Manual Issue A1 09/03 PDI Part # 900600 Performance Design Inc. 2350 East Braniff St. Boise Idaho 83716 This manual contains very important safety
TeSys contactors From 115 to 2750 A
Selection guide From to 0 A Applications Control of all types of motor for standard or severe duty applications Control of resistive, inductive and capacitive circuits: heating, lighting, cos j rectification,
ISOMETER isoev425/isoev425hc with coupling device AGH420
with coupling device AGH420 Insulation monitoring device for unearthed DC circuits (IT systems) for charging electric vehicles isoev425_d00126_04_d_xxen/06.2018 with coupling device AGH420 Insulation monitoring
AThink future. Switch to green. Mini Panel Board. Cost-effective, space-saving board up to 400A.
www.moeller.co.uk Mini Panel Board Cost-effective, space-saving board up to 400A Product Catalogue and Selection Guide Mini Panel Board Miniature Circuit Breakers Moulded Case Circuit Breakers XBoard Consumer
InForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
ASTAT XB/XBm Remote Operator
ASTAT XB/XBm Remote Operator User Manual 1 Introduction 1.1 Important User Information Observe all necessary safety precautions when controlling the soft starter remotely. Alert personnel that machinery
3RT, 3TB, 3TF Contactors for Switching Motors
RT, TB, TF Contactors for Switching Motors Overview RT contactors and coupling relays Size S00 with mountable accessories The SIRIUS generation of controls is a complete, modular system family, logically