KAUKAUNA TRAINING CENTER N2218 Bodde Rd, Kaukauna, WI

Transcription

1 May :00am-3:30pm Rigging Qualification 40hr (4/30-5/4) :00pm-9:00pm Total Station 16hr (5/7-5/10) 5:00pm-9:00pm Acoustical Ceilings 16hr (5/7-5/10) 7:00am-3:30pm REFRESHER Scaffold Qualification 8hr (5/11) :00am-3:30pm Rigging Qualification 40hr (5/14-5/18) 5:00pm-8:00pm 5/15, 5:00pm-9:00pm 5/17 Certified Welding 7hr (5/15, 5/17) :00pm-9:00pm Advanced Optics 16hr (5/21-5/24) Memorial Day Notes: Requirements: Union Card, Hard hat, safety glasses and work boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum attendance requirement is not met.

2 June :00AM-3:30PM REFRESHER Rigging Qualification 16hr (6/14-6/15) :00am-5:30pm Scaffold Erector Qualification 40hr (6/18-6/21) 5:00pm-9:00pm Advanced Welding Practice 16hr (6/18-6/21) :30am-4:00pm PITO, Aerial Lift, Industiral, Rough Terrain 8hr (6/25, 6/26, 6/27) 7:30am-4:00pm Millwright 16 (INCLUDES OSHA 10) 16hr (6/28-6/29) Notes: Requirements: Union Card, Hard hat, safety glasses and work boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum attendance requirement is not met.

3 July th of July Notes: Requirements: Union Card, Hard hat, safety glasses and work boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum attendance requirement is not met.

4 August Notes: Requirements: Union Card, Hard hat, safety glasses and work boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum attendance requirement is not met.

5 September Labor Day Notes: Requirements: Union card, Hard Hat, Safety Glasses and Work Boots

6 October Notes: Requirements: Union Card, Hard Hat, Safety Glasses and Work Boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum requirement is not met

7 November Thanksgiving Day Notes: Requirements: Union Card, Hard hat, safety glasses and work boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum attendance requirement is not met.

8 December Christmas Day Notes: Requirements: Union Card, Hard hat, safety glasses and work boots. All classes are taught in English unless noted. Classes will be cancelled if the minimum attendance requirement is not met.

9 Kaukauna Skill Enhancement Classes Acoustical Ceilings Covers basic theory, layout, and installation of an acoustic, suspended grid ceiling. Focuses primarily on 2x4-foot and 2x2-foot exposed grid ceilings. Includes laser level setup, print reading and material estimating. Advanced Optics Course length: 16 hours Participants will learn advanced shooting and recording with peg test, and shop time Course offered: May Course offered:may Advanced Welding 16 hour session. Opportunity for Members to practice welding on SMAW, GTAW, FCAW and GMAW Course offered:feb. 26-Mar 1; Apr. 2-5; June Aerial Lift Operator Qualification Course length: 8 hours Classroom presentations combine with hands-on training with scissors and boom lifts. Participants maneuver through an obstacle course and practice operating at extended heights Course offered:feb.12; Feb. 13; Feb. 14; June 25; June 26; June 27 American Red Cross CPR/First Aid/AED 5 hour course. This course provides First Aid/CPR certification Prerequisit: None Expiration: 2 years 2018 Course offered: Jan. 17; Jan. 31; Feb. 14, Mar. 14, Mar. 21 Basic Optics Course length: 16 hours Participants will learn to use an optical level, K&E and Kern, setting up, and terminology Course offered: Feb

10 Kaukauna Skill Enhancement Classes Building Information Modeling Understand how BIM is changing the construction process, Compare 3D plans with traditional 2D plans, Describe how a model is built, Able to define the BIM coordination process, Understand how BIM helps the trade coordination to avoid clashes, Use BIM to direct crews, Develop an understanding of how 4D BIM can be used with a schedule, Recognize how building envelop, total station and BIM can work together, Identify different types of 3D models used during the designing of construction drawings Buliding Envelope and Sustainability International Energy Conservation Codes, Sustainability and Codes, Building Envelope for High Performance, Buildings, Sealants, Water Restive Barriers, Thermal and Air Leaks, Testing, ITC Mock Ups 2018 Course offered:mar Course offered:jan Certified Welding: 7 hour course 2018 Course offered: Jan. 23, 25; Feb. 20, 22; Mar 20, 22; Apr 17, 19; May 15, 17 Construction Fall Protection 8 hour course This course covers how to recognize and properly address fall hazards in our industry. Hands on exposure to equipment used in fall protection. Prerequisit: None Expiration: None 2018 Course offered:jan. 29, 30

11 Construction Supervisor 1 Overview of being a Construction Supervisor, Company Responsibilities, Accident Prevention & Loss Control, Effective Communication, Problem Solving & Decision Making, Project Planning & Scheduling, Productivity Improvement, Cost Awareness, Contract Documents Kaukauna Skill Enhancement Classes ICRA: Best Practices in Health Care Construction Course length: 24 hours Combines classroom and hands-on simulations to teach big-picture awareness and best-practice skills for infection prevention during demolition and construction in hospitals and clinics. Participants learn to assess and reduce risks of spreading potentially fatal infections among patients, staff and themselves. Training focuses on containment, airflow, specialized equipment, and the different work procedures required in health care settings. This certification is good for four years Course offered:feb Course offered:feb. 5-7 Millwright 16-Hour Safety Course Course length: 16 hours The class is an intense, fast-paced but thorough course in OSHA and construction safety standards. It covers 16 subjects presented in a combination of hands-on manipulative training and interactive lecture. This is a required course to participate in UBC/GE Steam Turbine or Gas Turbine Qualification training at the International Training Center in Las Vegas 2018 Course offered: Feb ; June OSHA hour course. This course covers a basic OSHA overview, rights and responsibilities of employer and employee Prerequisit: None Expiration: None 2018 Course offered:feb 15-16; June MSHA Designed for workers new to surface mining. Covers statutory rights, work environment, transportation controls, communication systems, fire and emergency warnings and evacuations, ground control, hazard recognition, explosives, respiratory devices, and first aid Course offered: Feb OSHA hour course. This course covers amore in depth examination of OSHA standards, rights and responsibilities of employer and employee Prerequisit: None Expiration: None 2018 Course offered:online at Clicksafety.com

12 Kaukauna Skill Enhancement Classes PITO - Refresher: 1 hour course PITO Industrial 8 hour course. Forklift training, classroom and hands on training. Prerequisit: None Expiration: 3 years 2018 Course offered:feb. 13; Feb Course offered:feb. 12; Feb. 13; Feb. 14; June 25; June 26; June 27 Powered Industrial Truck operator (Pito- ForkLift): Rough Terrain Course length: 8 hours Covers the safe operation of lift trucks designed for use off pavement, and typically outdoors. Through a combination of classroom and hands-on training, each participant will have the opportunity to inspect and operate a lift. The course covers the key components of a lift truck, its capabilities and limitations, general maintenance, and operator responsibilities. Participants who successfully complete the course will receive a UBC certification card, good for three years Course offered:feb. 12; Feb. 13; Feb. 14; June 25; June 26; June 27 PRO hour course. Professionalism, communication, diversity, Union history, safety, and "Big Picture". Prerequisit: None Expiration: None 2018 Course offered:jan Rigging Refresher 16 hour course. This course refreshes/reviews 40 hour Rigging Course Prerequisit: Rigging 40 hr. Expiration: 4 years 2018 Course offered:jan. 4-5; Feb ; June Rigging 40 hour course. This course covers rules and regulations related to safe rigging practices; classroom and hands on. Rigging certifcation Prerequisit: None Expiration: 4 years 2018 Course offered:mar. 5-9; Mar ; Apr. 2-6; Apr. 9-13; Apr ; Apr ; Apr. 30-May 4; May 14-18

13 Scaffold Erector Qualification Designed to familiarize experienced Journeylevel Carpenters with OSHA safety regulations for scaffolding and to provide hands-on experience in the procedures necessary to safely erect scaffold. Kaukauna Skill Enhancement Classes Scaffold qualification: Refresher Course length: 8 hours Designed for the member who has already completed a UBC Full Scaffold Qualification Course. Members must complete Scaffold Refresher Training every four years to maintain their qualification. This refresher course covers the regulations that apply to scaffold erection and includes any updates to the training program or changes in regulations. Participants who successfully complete the course will receive UBC certification Course offered:june Course offered:jan. 26; Mar. 27, 28; May 11 Silica Compliance Education on the new OSHA silica standard for proper compliance. Solid Surface Installer Course length: 12 hours This UBC workshop certifies members to install the solid surface materials Gibraltar, Surell, Avonite, Corian, and Pionite. The class includes: Identification of types of solid surface material Safe work practices including procedures, rules and regulations for working with solid surface material Following manufacturer s recommendations for the handling and proper use of solid surface material, adhesives, fasteners, and hand and power tools used for cutting, sanding, and polishing Identifying basic warranty requirements of solid surface materials Participants who successfully complete the course will received a UBC certification card Course offered:feb. 13; Apr Course offered:apr

14 Total Station I Course length: 16 hours Combines classroom and hands-on training to cover the basics of total station usage. Topics include how the station works, setting up a job, proper handling and set-up of equipment, coordinate geometry, use of data collectors, establishing control points, good layout practices, and some advanced functions, such as offsets and restrictions 2018 Course offered:may 7-10 Kaukauna Skill Enhancement Classes