Hi-O Technology 02/10 T-077 MS0823 AAA-CA

Transcription

1 Hi-O Technology

2

3 Contents Introducing Hi-O Technology 2 Hi-O System Overview 4 Hi-O Technology Installation Series Electric Mortice Lock 6 811C Series Motor Lock 8 ES2000 Series Monitored Electric Strike 10 HT-PB Series Push Buttons 12 TKN Series Push Buttons Electromechanical Door Operator 14 HID iclass Readers 16 Accessories - Cable and Connectors 18 1

4 Introducing Hi-O Technology In the 21st century, the world has not become a safer place and as the demand for security solutions is constantly increasing. Information technology is responding by developing electronic security solutions. The demand for robust and sophisticated hardware like electromechanical locks is not decreasing. On the contrary trends show an increased convergence between IT networks, security software and electromechanical hardware, such as locks, door openers, strikes and emergency solutions. As security professionals seek better ways to manage door openings, ASSA ABLOY Australia offers Hi-O (Highly intelligent Opening). Hi-O is a new standardised technology for control and security of door opening solutions. It enables detailed door monitoring, real time diagnostics and sharing of opening information. Hi-O offers easier installations and troubleshooting, and extended life of the components bringing peace of mind for the building owner. An electromechanical lock could be equipped with sensors to identify when the performance of the of motor is degrading. The need for maintenance could then be reported via a LAN to trigger an SMS or to a maintenance technician with detailed service information. Hi-O technology is based on CAN (Controller Area Network), a well proven and reliable standard that is used in most new cars today and many other industrial and consumer products. All devices equipped with Hi-O technology communicate over a single 4 wire CANBUS that has two wires for data and two wires for power this creates a plug and play system that greatly reduces installation time, cost and complexity. Hi-O Basics Standardised communication platform developed by ASSA ABLOY for electromechanical devices designed to simplify installation, service and upgrade Provides intelligence and communication protocol to door components Firmware running on micro controller in each electromechanical device All devices connected with 4 wires. 2 for data and 2 for power Based on CAN Open standard used for many years in the car industry that allows connected devices to exchange and share encrypted information 2 hi-o.com.au

5 Benefits and Capabilities Hi-O Technology: Simplified Installation and Maintenance Enhanced Functionality and Security With Hi-O, all electromechanical devices have embedded intelligence for sharing encrypted information. Each device communicates its status and capabilities to the other devices, so the opening operates efficiently at all times. Installations are faster and require virtually no troubleshooting Standardised way to connect all devices 4 wires Plug and play automatic configuration with report generation Access control and door monitoring information pinpoint what s happening at the door opening Components detect tampering and operate accordingly to preserve security and functionality Advanced diagnostics - maintenance becomes predictive instead of reactive Encryption over the Hi-O network For Security Consultants, Architects, Integrators and Project Planners With it s built in intelligence, plug and play connectors, and ability to work with third party enterprise software, Hi-O is easy to specify and integrate into any building. Remote diagnostic capabilities streamline servicing and increase security. For Building Owners and Facility Managers The plug and play Hi-O system is easy to install and maintain, meaning less disruption at the site. Future upgrading of components will be simple because components use embedded intelligence for automatic configuration onto the network. Hi-O enables easier and more precise monitoring of what s occurring at the opening. For Locksmiths and Installers Plug and play Hi-O components wired with standardised Molex connectors ensure only correct connections can be established. Automatic configuration immediately activates the system and diagnostics identify devices needing adjustment, making Hi-O easy to install and initiate. 3

6 Hi-O System Overview Third Party Controller, acting as Hi-O Gateway Electronic access control panel Access Point Hi-O Manager (application used for installation and configuration) Third Party Enterprise Software with Remote Hi-O Manager Capabilites Installation and Configuration Each individual door is its own Hi-O network in which electromechanical devices are typically connected in a daisy chain configuration, by simple method of cables and connectors. This connection between devices creates the CANBUS that enables communication between the devices. From the door, there is only one four wire cable two wires for power and two wires for data. This CANBUS is designed to connect directly to a third party door access controller, that then converts signals from the CANBUS into existing protocols used today e.g. RS485 Hi-O compatible product will operate with default configuration as soon as power is applied. There is no need to make any settings, it all works right out of the box. In order to configure a Hi-O compatible system to specific needs, the Hi-O Manager tool is used. Hi-O Manager is a PC based application that allows modification of Hi-O device parameters and system behaviour. This is generally connected via an access point somewhere on the CANBUS through simple connectors. 4 hi-o.com.au

7 Hi-O Technology Installation Prox Reader Outside Electric Strike Push Button Inside The Intelligent door a typical door installation Hi-O Installations are designed to be fast and accurate with minimal termination of wiring required on site. A series of pre wired connectors, cables and plugs are available for various applications, depending on the devices required (see page 20). All devices use standard Molex connectors. Using these connectors each device is simply plugged in, and then in a daisy chain configuration it is plugged into the next device. Once all devices are connected there is one four wire cable to terminate at the top of the door. In many cases this can be simply plugged into the Hi-O gateway or door access controller. Every Hi-O device has only four wires: Red wire: positive Black wire: negative White wire: CAN Data High (CAN_H) Brown wire: CAN Data Low (CAN_L) Plug and Play Connectivity All devices are capable of connecting utilizing standard Molex connectors. Simply connect all devices and apply power! 5

8 Hi-O 3570 Series Electric Mortice Lock General Information Designed and manufactured in Australia, the 3570 series electric mortice is a high performance lock of superior quality. It is constructed from high grade zinc alloy, with a stainless steel latch bolt and face plate and is suited for all commercial applications. The lock can be operated by push buttons, intercom systems and key switches; or integrated with electronic access control systems for use with higher security devices such as keypads or card readers. Key Features Designed with flexibility in mind, the one lock can cover all functions and is easily configured on site for the required application. Fully monitored Fast and accurate Installation with simple plug and play connectors Encrypted communication between devices ensures integrity of the opening Local monitoring for installation and maintenance Self regulating power 12-28Vdc Monitoring features: Dead latched and Locked Door position/reed switch Dual key override monitoring Request to exit/rex LED indication Field changeable settings: Fail safe/fail secure configuration Handing - left hand and right hand doors Selection of free lever or locked lever on both sides of the door Standards and Compliance S3 D3 4 Hour (Security) Australian Lock Standard (AS ) (when used with equivalent security level keying system) (Durability) Australian Lock Standard (AS ) Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS (Part 1: Fire resistant door sets) C-Tick Certified Key override monitoring either side of the door 6 hi-o.com.au

9 Hi-O 3570 Series Electric Mortice Lock A Reed Magnet B Note: width of case increases from 19mm to 23 mm for 3579 series SCEC lock 38 Dimension Backset A B H3570 Technical Information Voltage Current LED Current Monitoring 12-28Vdc 500mA (max) 80mA 12Vdc 275mA (max) 50mA 24Vdc When LED s are fitted, add 15mA (max) to total current draw Dual Key override Deadlatched Locked Door closed Request to exit Environment Operational temperature range - 20 c to 60 c Case/Cover High purity zinc alloy construction Ordering Information Hi-O 3570 Series Electric Mortice Lock Wire Assignments Pin Color Description 5 Red Vdc 1 Black 0Vdc 2 White CAN_H 4 Brown CAN_L 3570ELH0SC Backset Latch bolts Door Clearance 60mm Reversible with stainless steel construction mm Pin 5 - Red (+Vdc) Pin 4 - Brown (CAN_L) Door thickness Cylinder Standard applications 32 to 50mm Standard Lockwood oval shaped cylinders Pin 1 - Black (0Vdc) Pin 2 - White (CAN_H) Cabling 2 metre length of cable with pin socket supplied with each lock. Recommended cable: 18AWG (0.82mm²) cable runs up to 30m Furniture Compatible with Lockwood series door furniture Standard Finishes Satin Chrome standard. Bright Chrome and Polished Brass finishes achieved via spare face plates and screws 7

10 Hi-O 811C Series Motor Lock General Information The 811C series Hook bolt lock is a robust commercial grade lockset ideally suited for both sliding and hinged door applications. Equipped with Hi-O technology, this locks is easy to install and an ideal solution as a secondary device for night locking applications. Features Fast and accurate installation with simple plug and play connectors Encrypted communication between devices ensures integrity of the opening Local monitoring for installation and maintenance Cylinder or thumb turn provides mechanical override in case of power loss or other emergency override 50 or 70mm backset option Increased security with hook bolt that interconnects with frame Minimum operating time less than 1/3 of a second Self regulating power 12-28Vdc Integrated door reed switch Applications Suitable for high security commercial applications All door types hinged, double and 180 degree swing through door applications Suitable for door with automatic door operators 8 hi-o.com.au

11 Hi-O 811C Series Motor Lock 19, ,5 37, (70) 64(84) Hi-O 811C Motor Lock Technical Information Ordering Information Voltage 12-28Vdc Current Monitoring Idle 65mA, Max 24Vdc Door position Hi-O Motor Hook Lock 50mm backset 811C-50 Hi-O Motor Hook Lock 70mm backset 811C-70 Door clearance Environment Maximum gap between lock and strike, 6mm. Operational temperature range -40 C to +70 C Euro Adaptor Used to convert from Euro style plug to Molex connector HLM-010 Backset Latch bolts Cylinder Standard Finishes 50 or 70mm Bolt Throw 24mm Scandinavian oval or round Satin Chrome (SC) Wire Assignments Pin Color Description 5 Red Vdc 1 Black 0Vdc 2 White CAN_H 4 Brown CAN_L Pin 5 - Red (+Vdc) Pin 4 - Brown (CAN_L) Pin 1 - Black (0Vdc) Pin 2 - White (CAN_H) 9

12 Hi-O ES2000 Series Monitored Electric Strike General Description The Hi-O enabled ES2000 series electric strikes are fully monitored high security products manufactured from solid stainless steel. The strikes are suitable for use with hinged doors which require either fire or security control as part of a building management system. These strikes are flexible and can be changed from fail safe to fail secure, mounted on the left or right hand side of the door and have self regulating power from 12-28Vdc. They offer a strong, dependable and long-lasting electric strike solution with a 850kg holding force and endurance rating of 1 million cycles. Key Features Fast and accurate installation with simple plug and play connectors Encrypted communication between devices ensures integrity of the opening Local monitoring for installation and maintenance Self regulating power 12-28Vdc Fully monitored strike locked and door latched Fail safe/fail secure changeable on site 4 Hour fire rating 850kg holding force Cast stainless steel body Stainless steel locking pins SCEC Endorsed Low Current consumption - Max Standards and Compliance S3 D3 (Security) Australian Lock Standard (AS ) (Durability) Australian Lock Standard (AS ) BS 5872 Approved Mounting kit supplied as standard Australian designed and made 5 Year Warranty Applications High traffic areas Fire rated door sets Open in/open out doors 4 Hour Successfully fire rated up to 4hrs on fire door assemblies in accordance with AS (Part 1: Fire resistant door sets) C-Tick Certified SCEC endorsed for secure areas 10 hi-o.com.au

13 Hi-O ES2000 Series Monitored Electric Strike 26.5mm 28.5mm 26.5mm 28.5mm 26.5mm 28.5mm 122mm 176mm 122mm 176mm 122mm 176mm 24.5mm 24.5mm 24.5mm ES2000 with 25mm Extension Lip ES2000 with 50mm Extension Lip ES2000 with 75mm Extension Lip ES2000 Technical Information Ordering Information Voltage 12-28Vdc Current Solenoids Monitoring Holding Force Endurance Latch Environment Body Keeper Vdc Vdc Solenoids are rated for continuous use Solenoid Monitor Door/Latch Monitor 850kg Static Strength Rating Cycle tested to 1,000,000 operations Suitable for 15mm latch tongue with 3 mm door gap Operational temperature range - 20 C to +60 C Solid Stainless Steel Construction Stainless Steel 12-28Vdc Fail Safe Hi-O Strike H Vdc Fail Secure Hi-O Strike H00 Accessories 13mm Rebate Plate mm Extension Lip mm Extension Lip Extension Lip Wire Assignments Pin Color Description 5 Red Vdc 1 Black 0Vdc 2 White CAN_H 4 Brown CAN_L Pin 5 - Red (+Vdc) Pin 4 - Brown (CAN_L) Pin 1 - Black (0Vdc) Pin 2 - White (CAN_H) NOTE: Electric strikes are not pre drilled for extension lips. Strikes with extension lip holes available upon application 11

14 R Hi-O HT-PB Series Push Buttons General Description The PB2 series push button with Hi-O technology is a spring loaded momentary square exit button, with bi-colour illumination and is mounted on a stainless steel single gang outlet box cover. Key Features Fast and accurate installation with simple plug and play connectors Encrypted communication between devices ensures integrity of the opening Local monitoring for installation and maintenance Self regulating power 12-28Vdc Hi-O HT-PB Series Push Buttons Technical Information Ordering Information Voltage 12-28Vdc Current Hi-O push button HT-PBE Monitoring Encrypted communication between devices Hi-O push button with LED HT-PB2 Connectors Molex Environment Operational temperature range - 0 C to + 43 C Wire Assignments Standard Finishes Green exit button mounted on stainless steel gang plate Pin Color Description 5 Red Vdc 1 Black 0Vdc 2 White CAN_H 4 Brown CAN_L Pin 5 - Red (+Vdc) Pin 4 - Brown (CAN_L) Pin 1 - Black (0Vdc) Pin 2 - White (CAN_H) 12 hi-o.com.au

15 Hi-O TKN Series Push Buttons General Description The Hi-O TKN50 series push button is a momentary exit button with capacitive touch technology. The exit button will function when a hand is placed within 1cm of the button, making it an ideal selection for sterile environments. Key Features Capacitive touch technology button operates touch free within 1cm Blue LED indication Fast and accurate installation with simple plug and play connectors Encrypted communication between devices ensures integrity of the opening Local monitoring for installation and maintenance Self regulating power 12-28Vdc Hi-O TKN Series Push Buttons Technical Information Ordering Information Voltage 12-28Vdc Current TKN50 Hi-O Capacitive touch push button TKN50 Monitoring Connectors Encrypted communication between devices Molex Wire Assignments Environment Operational temperature range - 0 C to + 43 C Pin Color Description Standard Finishes Material White White PC plastic 5 Red Vdc 1 Black 0Vdc 2 White CAN_H 4 Brown CAN_L Pin 5 - Red (+Vdc) Pin 4 - Brown (CAN_L) Pin 1 - Black (0Vdc) Pin 2 - White (CAN_H) 13

16 R 8002 Electromechanical Door Operator General Information The Lockwood Swing Door Operator is an electro-hydraulic operator designed for a wide variety of applications. It is suitable for almost all types of external and internal swing doors and has been developed to cope with tough conditions. The operator can be mounted on either side of the door for pull or push action and is suitable for single or double doors fitted with butt hinges or pivots. With remote, push button and motion sensor options, the 8002 provides a full range of electronic door opening solutions. The 8002 series is a standard operator that requires the Hi-O Kit (8002HK) to operate on Hi-O technology. Features Fast and accurate Installation with simple plug and play connectors Encrypted communication between devices ensures integrity of the opening Local monitoring for installation and maintenance Self regulating power 12-28Vdc Opens with motor and closes with spring Opening and closing speeds can be varied individually Door opening angle adjustable up to 120 A range of manual and automatic activation units available Impulse and presence detection sensors available Non handed Push or pull opening solutions Applications Disability entrance solutions Hospital and health centre applications Access controlled locking In swinging or out swinging doors Meets requirements for door weights/widths stated in the: Controlled door closing, EN 1154 size 3 6 Coordination unit for rebated doors, EN 1158 Door closer with opening device (Swing door operator), DIN AU Size 3-6 ANSI/BHMA A156.10, A UL325/CUL325 SITAC 0710/97 14 hi-o.com.au

17 8002 Electromechanical Door Operator Pull Side Push Side Y Min Y = Shaft Extension A 38 Min A Technical Information Ordering Information Electrical 230V AC Mains power, 50 Hz fuse10 A Door leaf width Maximum door width 1600mm Swing Door Operator (PULL SIDE) Swing Door Operator (PUSH SIDE) 8002SSIL 8002PSIL Recommended door weight Maximum door weight 250kg Hi-O Kit 8002HK Door opening angle Maximum opening angle Closing Power EN Size 3-6 Environment Dimensions Operational temperature range: -15 C to + 50 C 110 (H) x 110 (D) x 716 (L) mm NOTE: each door operator requires 1 x 8002HK to operate with Hi-O technology Wire Assignments Pin Color Description 5 Red Vdc 1 Black 0Vdc 2 White CAN_H 4 Brown CAN_L Pin 5 - Red (+Vdc) Pin 4 - Brown (CAN_L) Pin 1 - Black (0Vdc) Pin 2 - White (CAN_H) 15

18 Hi-O HID iclass Readers R10 R15 R30 RK40 iclass smart card readers and cards make access control more powerful, more versatile and most importantly, offer enhanced security through encryption and mutual authentication. At the same time, iclass is user-friendly, delivering the convenience, affordability and reliability of proximity technology, for which HID products are known worldwide. Using the MHz technology platform, the iclass read-only contactless smart card readers combine the longer read range of proximity with the heightened security of Hi-O and smartcard technology, making it an ideal solution for all access control applications. A full range of HID iclass proximity readers with Hi-O technology is available. 16 hi-o.com.au

19 17

20 Accessories Cable and Connectors 3 way connector HLM-003 Reader and push button Dual readers Door operator bus connector Access point to CANBUS (Hi-O Manager) max distance between devices 200mm 4 way connector HLM004 Reader, push button and strike Dual readers and strike Access point to CANBUS (Hi-O Manager) max distance between devices 200mm Mortice lock cable 2 metres Standard cable supplied with mortice locks Single connector only Second connector terminated on site (supplied with cable) HLM-005 Frame cable 3.5 metres Cable from door or transfer device to gateway/ DAC or door operators Single connector only Second connector terminated on site (supplied with cable) HLM hi-o.com.au

21 Extended cable 8 metres Cable from top of door to gateway / EAC DAC Double connector HLM-008 Euro adaptor 100mm Adaptor to convert Euro style locks (EL654 and 811C) to Molex connectors HLM-010 Terminal strip adaptor Used when extended cable runs are required or joining multiple Hi-O looms without connectors supplied as a pair. HLM-011 Installer starter kit CAN-USB Converter: This is the interface used to connect directly to the Hi-O CANBUS for system configuration through PC based application Hi-O Manager. All cables and connections supplied Installation CD The CD contains files to install the Hi-O Manager application on your PC. HK-000 Hi-O Technology Bringing Network Intelligence to the Door 19

22 Notes 20 hi-o.com.au

23 21

24 ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America. As the world s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company on the market. Head Office ASSA ABLOY Australia Pty Limited 235 Huntingdale Road, Oakleigh Victoria, 3166 Australia 1300 LOCK UP ( ) info.au@assaabloy.com assaabloy.com.au MS0823 AAA-CAT /10 ASSA ABLOY Australia Pty Limited ABN