Woolworths Limited. Contractor Safety Management System. Specialist Contractor Portal IT Contactor User Guidelines

Transcription

1 Woolworths Limited Contractor Safety Management System Specialist Contractor Portal IT Contactor User Guidelines

2 Contents 1) Overview ) Register IT Specialist Contractors ) Contractor Company Registration ) Contractor Individual Registration ) Online Safety Induction

3 1) Overview The Woolworths Contractor Safety Management System Portal is the gateway to allow Contractors to register and meet the safety compliance requirements of Woolworths Limited. This portal allows individual Specialist Contractors to: Register as an company and individual IT Specialist Contractor Book and complete and online Safety Contractor Induction Print a copy and download to a Smartphone the Woolworths Contactor Safety Card 3

4 2) Register IT Specialist Contractors a) First Setup click Specialist Contractor to register: b) Click on the IT Specialist Contract start button: 4

5 a) Company Registration i. Enter the company name, or a sub-set of the company name and click Search *For Subcontractors please select your Head contracting company, this is the company who engages your company to carry out the work ii. iii. If the company name appears in the search results, select your company. If the company you work for does not appear on the list, please contact your company representative and have them contact Pegasus. Note: If the company you searched for is already registered in the system but has not been approved to access complimentary inductions, you will be directed back to the home page and will be required to login and register for the inductions. 5

6 b) Contractor Individual Registration i. Complete the registration process and select Save: Note: Select Show Non Mandatory to register additional details ii. Upload a photo for the registration process, select Files Upload: Note: Digital head shot photo is to be provided in JPG format, similar to a passport photo. 6

7 iii. Upload your jpg image using the browse function to locate the image, click open, then click upload include your name and any relevant comments iv. Crop your jpg image using the crop function to resize the image to fit the Contractor Safety Card requirements, the image must only feature a head, the same format as a passport photo Note: If the photo is not of a suitable quality, you will be prompted to provide another photo 7

8 v. Use the crop function and related instructions to resize your image to fit your Contractor Safety Card, once satisfied with the final photo select apply vi. Click Submit to finalise the registration process, you are now booked into the IT Contractor safety induction 8

9 vii. Your registration is now finalised, a copy of your receipt has been to you, you can click on the download button to access a copy of your receipt now 9

10 3) Online Safety Induction a) Your application to complete the online Safety Induction training is now being assessed, you will be notified by once approved on how to access the course and print your Safety Induction Card a) Once you receive the approval you can complete the online IT Contractor Safety Induction. The induction will take approximately mins to complete and consists of a number of multiple choice questions. Click next to get started 10

11 b) You will be notified via of your exam result. If you passed your exam you will be issued with an electronic card to print and take with you when you work on site. If you failed the exam, you will be notified by and will be permitted to re-sit the exam ten times before you will be denied access. If this happens, please re-register from 11

12 c) The notification will contain the information below: 12

13 d) Please Click on the link to print your Contractor Card 13