FAQ Guide for C203/C253/C353 & C451/C550/C650

Size: px

Start display at page:

Download "FAQ Guide for C203/C253/C353 & C451/C550/C650"

Amberlynn Allison
6 years ago
Views:

1 FAQ and Quick Guide

3 FAQ Guide for C203/C253/C353 & C451/C550/C650 Quick Copy Screen (Setting Default options) Stapling and Sorting (Group and Offset options) Booklet Feature (Single-Sided Originals) Mode Memory (Saving Copier Settings)

It has many of the same features and settings as the Basic Copy Screen (pictured below); but is

5 Stapling and Sorting The Quick Q Copy Screen (pictured above) can be set as the Default Screen when using the Touch Screen interface on the Bizhub copier. It has many of the same features and settings as the Basic Copy Screen (pictured below); but is presented in an open format so that all options are available for easy selection when inputting copy settings. FAQ Guide for C203/C253/C353 & C451/C550/C650

Stapling and Sorting continued After enabling the Sort and/or Offset functions from the Finishing Feature; place your original face-down on the platen glass and press the Start button.

6 Stapling and Sorting continued After enabling the Sort and/or Offset functions from the Finishing Feature; place your original face-down on the platen glass and press the Start button. This will scan your original documents to memory and allow you to continue scanning all documents. After scanning all desired documents, select the Finish option from the touch screen options and all copies will be output to the finisher.* *If the Sort and/or Offset functions are enabled as copier Defaults f each document that t is placed on the platen glass will be handled using the Separate Scan mode. This will require the user to place their originals on the platen glass and to select the Finish option from the touch screen menu when finished scanning all original documents. FAQ Guide for C203/C253/C353 & C451/C550/C650

7 Stapling and Sorting - (Group and Offset options) The Staple and Sort functions are located within the Finishing Tab (pictured above). Factory machine finishing defaults are set where Group and Offset functions are off. Be advised that when enabling the Sort and / or Offset functions, this will enable a Separate Scan Mode when copying using the platen glass. FAQ Guide for C203/C253/C353 & C451/C550/C650

Booklet Feature using single-sided originals (8 ½

orientation original documents into the document

Select the Application tab, then select the

8 Booklet Feature using single-sided originals (8 ½ x 11) Place your single-sided, 8 ½ x 11, portrait orientation original documents into the document feeder (face-up going the same direction). Select the Application tab, then select the Booklet Feature. FAQ Guide for 203/253/353 & C451/C550/C650

9 Booklet Feature continued The Booklet Feature is pre-set to paginate the 8 ½ x 11 original documents into the correct order within the finished booklet so that Page 1 is the front cover and Page 8 is the back cover. The Booklet Feature works best with an even number of 8 ½ x 11 original documents this will eliminate blank pages in the finished booklet.* If you desire a Fold and/or a Saddle Stitch Staple in the crease of your finished booklet, please add the optional Booklet Finisher to your Bizhub Copier. *The diagram below illustrates the automatic pagination of 8 ½ x 11 originals into a finished booklet FAQ Guide for 203/253/353 & C451/C550/C650

Simply select your copy job specific settings using the touch screen interface and then touch the Mode d Memory Button.

10 Mode Memory - Saving and Recalling Settings If there are certain copy jobs that require special settings or are commonly used you can save the settings within the Mode Memory Feature. Simply select your copy job specific settings using the touch screen interface and then touch the Mode d Memory Button. Select an Empty Location from the menu, then select the Register Program Button from the top-right hand side of the screen. FAQ Guide for C203/C253/C353 & C451/C550/C650

To Recall your saved copy job settings, simply touch the Mode Memory Button, then select your saved copy job

11 Mode Memory continued Using the keyboard on the touch screen interface, type in a name for the copy job settings that you wish to save in the desired location in Mode Memory. Select OK when done inputting the desired name. To Recall your saved copy job settings, simply touch the Mode Memory Button, then select your saved copy job setting from the menu on the touch screen interface; then select the OK button. FAQ Guide for C203/C253/C353 & C451/C550/C650

SACRAMENTO 10491 Old Placerville Rd, Suite 150 Sacramento, Ca 95827 SAN JOSE 170 Rose Orchard Way, Suite 100 San Jose, Ca 95134 PLEASANTON 6140 Stoneridge Mall Dr.

12 SACRAMENTO Old Placerville Rd, Suite 150 Sacramento, Ca SAN JOSE 170 Rose Orchard Way, Suite 100 San Jose, Ca PLEASANTON 6140 Stoneridge Mall Dr., Suite 325 Pleasanton, Ca FRESNO 7485 N. Palm Avenue, Suite 100 Fresno, Ca MONTEREY 1 Lower Ragsdale Dr. Bldg. 3, Suite 800 Monterey, Ca ROSEVILLE 5955 Granite Lake Dr. Suite 140 Granite Bay, Ca SANTA ROSA 1550 Airport Blvd. Suite 120 Santa Rosa CA 9540 FAIRFIELD 360 Campus Lane, Suite 203 Fairfield, CA Service: Sales:

Advanced Copying. Building a Job

Advanced Copying. Building a Job Advanced Copying Use the Job Assembly tab to change the following settings: Building a Job on page 114 Printing a Sample Copy on page 116 Combining Original Sets on page 116 Delete Outside/Delete Inside