Configuration. English. Video Management System. SeMSy III Modul Map. Rev /

Transcription

1 Configuration English Video Management System SeMSy III Modul Map Rev /

2 Information about Copyright, Trademarks, Design Patents 2014 Dallmeier electronic The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. We reserve the right to make technical modifications. The manufacturer accepts no liability for damage to property or pecuniary damages arising due to minor defects of the product or documentation, e.g. print or spelling errors, and for those not caused by intention or gross negligence of the manufacturer. Dallmeier electronic GmbH & Co.KG Cranachweg Regensburg, Germany info@dallmeier.com All trademarks identified by are registered trademarks of Dallmeier electronic. All trademarks identified by *) are trademarks or registered trademarks of the following owners: Microsoft and Windows of Microsoft Corporation headquartered in Redmond, Washington, USA Third-party trademarks are named for information purposes only. Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected. 2

3 Table of Contents 1 Introduction Validity Documents Typographical Conventions General Notes Appropriate Use Performance Features AutoCAD Compatibility Warranty Login Customize Directory First Start Admin Mode Login Logout User Interface User Mode Configuration Mode Language Configuration Import Maps Create Camera Buttons Edit Camera Buttons Delete Camera Buttons Activate Layers Delete Map Pathfinder Import Position the Map Module Customize View Save Maps Locally

4 1 Introduction 1.1 Validity This document is valid for the configuration of the SeMSy III module SeMSy Map. It has been produced on the basis of the following software versions: Microsoft* ) Windows* ) 7 SeMSy Map version Illustrations in this document may differ from the actual product. 1.2 Documents Operation The document Operation contains descriptions on how to operate the software. General information on the appropriate use is also provided. The target audience of this document is the operator of a surveillance system. Basic computer and CCVTV knowledge are required. Configuration (this document) The document Configuration contains detailed descriptions of the configuration of the software. Safety notes, general information and technical data are additionally provided. The target audience of this document is trained and authorized professionals (installers). 1.3 Typographical Conventions For reasons of clarity and readability, various text formatting elements and types of emphasis are used in this documentation: NOTICE NOTICE indicates practices for preventing property damage, incorrect configurations or faulty operations. Instructions are indicated by arrows ( ). ¾¾Always carry out instructions one after the other in the sequence described. Expressions in bold/italics generally indicate a control element on the device (switches or labels) or on its user interface (buttons, menu entries). Paragraphs in italics provide information on basic principles, special features and efficient procedures as well as general recommendations. 4

5 2 General Notes 2.1 Appropriate Use The SeMSy Map module allows the integration of site plans in the SeMSy III interface. There can be mapped camera positions, activated quickly via a map and status messages can be displayed. 2.2 Performance Features Operation by drag & drop Easy and intuitive Integration of site plans in the formats CAD, DWG, JPEG, JPG, BMP, GIF, PNG Automatic loading of levels in the formats CAD and DWG Displaying status messages 2.3 AutoCAD Compatibility The following AutoCAD versions are compatible with SeMSy Map: AC1024: AutoCAD 2011 AC1024: AutoCAD 2010 AC1021: AutoCAD 2009 AC1021: AutoCAD 2008 AC1021: AutoCAD 2007 AC1018: AutoCAD 2006 AC1018: AutoCAD 2005 AC1018: AutoCAD 2004 AC1015: AutoCAD 2002 AC1015: AutoCAD 2000i AC1015: AutoCAD 2000 AC1014: Release 14 AC1012: Release 13 AC1009: Release 11/12 AC1006: Release 10 AC1004: Release 9 AC1003: Version 2.60 AC1002: Version Warranty The terms and conditions valid at the signing of the contract shall apply. 5

6 3 Login The Map module can be run as a standalone application or can be activated via the module launch bar in a SeMSy III system. 3.1 Customize Directory Workstations with 32-bit systems need to be adjusted before the first start of the directory path of the executable map file: ¾¾Open the semsymap.xml file in a suitable text editor via C:\Program Files (x86) > Dallmeier > opc > GUI > modules. ¾¾Edit the Program Files (x86) entry to Program Files. ¾¾Save and close the semsymap.xml file. 3.2 First Start After the first start of the Map module must be done first the log on to the SeMSy III database. ¾¾Start the SeMSy Map application. or ¾¾Open the Map module via the module launch bar. The login dialogue for the SeMSy III database is automatically displayed after the first start. Fig. 3-1 ¾¾Enter the required information to log on to the database. ¾¾Click the OK button in order to save the settings. 6

7 3.3 Admin Mode Login In order to configure site plans or maps in the Map module the Admin-Mode must be activated. ¾¾Open the Map module. ¾¾Click the Admin-Mode button. The Admin-Password dialogue is displayed. Fig. 3-2 The default password is admin. ¾¾Enter the passsword. ¾¾Confirm with the OK button. The Admin-Mode button is grayed out and a red text note is displayed: The configuration mode is enabled. Fig. 3-3 ¾¾Proceed as described below to configure the Map module. 7

8 SeMSy III Module Map Logout In order to exit the configuration mode and return to user mode, proceed as follows: ¾¾ Select File > Admin logout. Fig. 3-4 The red text note at the top disappears and the Map module is back in user mode. Fig

9 4 User Interface After starting the user interface of the Map module is displayed depending on the setting. 4.1 User Mode Note the documentation Operation for SeMSy III Workstation Software. Quick selection buttons Current map Actions buttons Fig. 4-1 Quick Selection If there are multiple maps / site plans in the Map module deposited, it can be switched with the Quick selection buttons between the maps / site plans. Actions Functions and actions for the operation of the Map module are executed on the button bar. 4.2 Configuration Mode After logging into the Admin-Mode the advanced configuration mode is available. 9

10 SeMSy III Module Map Configuration menu Fig. 4-2 ¾¾ Make the required settings as described below. 4.3 Language The interface language can be changed. ¾¾ Log in to the Admin-Mode as described above. Fig

11 ¾¾Select the required language via File > Language. The user interface is adapted without rebooting immediately to the newly selected language. 11

12 5 Configuration In configuration mode, maps / site plans can be imported and edited. 5.1 Import Maps Drawings, images or backgrounds in the formats CAD, DWG, JPEG, JPG, BMP, GIF, PNG can be imported as maps into the Map module and configured. Drawings in the CAD and DWG formats also allow automatic scanning of camera buttons (positions) and the display of various levels, when these are stored in the file. Proceed as follows in order to import a map: ¾¾Enable the Admin-Mode as described above. ¾¾Open the New Map dialogue via Map > New. Fig. 5-1 ¾¾Open the directory of the map with the... button in the Backgroundfile line. ¾¾Select the required map. ¾¾Enter an appropriate name in the Mapname filed. ¾¾Enter the required AreaCode. The Area Code field must not be empty, even if only one system area is available. Enter in this case 1 as Area Code. ¾¾Enable the Auto-Search for Camera-Buttons in Cad-Files check box if required. Camera buttons in CAD or DWG files are automatically read with activated Auto Search function. ¾ ¾ Make the settings for an alternative map size in the Alternative Map-Width and -Height fields if required. 12

13 ¾¾Enter an alternative map colour in the Alternative Map-Color box if required. ¾¾Click the Set as Home-Map button if required. A map that is defined as a Home-Map is automatically loaded at the start of the Map module. ¾¾Finally click the OK button in order to start the import of the map. 5.2 Create Camera Buttons It is possible to create and configure camera buttons. Existing buttons can be edited and customized. ¾¾Activate the required map. ¾¾Enable the Admin-Mode as described above. ¾¾Zoom with the mouse wheel in the map in or out if required. ¾¾Hold down the Ctrl button and left-click the required position of the new button. The new button and the New Button dialogue is displayed. Fig. 5-2 New camera button 13

14 The settings for the new camera button are made in the New Button dialogue: Fig. 5-3 ¾¾Select the Advanced option from the Style dropdown box in order to obtain all possible settings for the new button. ¾¾Select from the drop-down menu Visible, whether the button should be visible (True) or invisible (False). Assign Activity The Identifier option allows to associate an activity on a button. It can be linked to encoder, other maps or to a salvo. ¾¾Click the... button in the Identifier field. The Select Identifier dialogue is displayed. Fig. 5-4 ¾¾Select the required link in the Select Identifier area. ¾¾Select the required destination. ¾¾Click the OK button in order to save the settings. 14

15 Colour The options of Body (surface area) and Border (frame) allow to customize a button colour. ¾¾Select the required colour from the the respective dropdown menu. Blink The Blink option allows a button on the map light up / to blink. ¾¾Open the Blink dialogue via the... button in the Blink field. Fig. 5-5 ¾¾Activate the Enabled check box. ¾¾Select a suitable colour from the dropdown menu Color. ¾¾Enable one of the following options: Body: Flashing of the button area Border: Flashing of the button frame ¾¾Click the OK button in order to save the settings. Text Buttons can be labeled with the camera number or name. ¾¾Click the... button in the Text field. 15

16 The Text dialogue is displayed. Fig. 5-6 ¾¾Enter in the Value field the required variable: %e = Camera number %n = Camera name ¾¾Select from the Alignment dropdown box the required text alignment. ¾¾Set a suitable text size in the Font Size box. ¾¾Click the OK button in order to save the settings. Define Image Set It is possible to use a set of images as button backgrounds. The individual images must be created in PNG format, numbered from 0 to 9 and stored in a folder in the following directory: Program Files > Dallmeier > SeMSyIII > SeMSy Map > Image Sets. ¾¾Open the Image dialogue with click on the... button in the Image field. Fig. 5-7 ¾¾Select the required image set from the Image dropdown box. 16

17 ¾¾Set a suitable zoom factor in the Default Zoom box. ¾¾Click the OK button in order to save the settings. Position The position and size of buttons can be defined exactly in the Position dialogue. In addition, the arrangement for the button can be set (in the case of multiple buttons, covering over itself). ¾¾Open the Position dialogue via the... button in the Position field. Fig. 5-8 ¾¾Set the exact position of the button in the boxes Left and Top. ¾¾Set the exact size of the button in the boxes Width and Height. ¾¾Define the arrangement of the button with the Layer option if required. The higher the value the more the focus of the button is located. ¾¾Click the OK button in order to save the settings. With the Recall last settings button it is possible to produce the previous settings of the button again. Polygon With the Polygon option it is possible to integrate an arbitrary polygon as a button on a map. So, for example in a salvo, all cameras involved can be covered with a button. ¾¾Open the Polygon dialogue via the... button in the Polygon field. ¾¾Drag the button area over the required area of the map. ¾ ¾ Press the ALT key and click with the left mouse button from the points of the desired polygon within the button area. 17

18 Fig. 5-9 A polygon can be deleted with the button Clear. ¾¾Enable the Restrict mouse events to polygon region check box if required. If this option is enabled, mouse events are strictly limited to the polygon. ¾¾Select from the Color dropdown menu a suitable colour for the button. ¾¾Click the OK button in order to save the settings Edit Camera Buttons Existing camera buttons can already be edited via the context menu. ¾¾Open the required map. ¾¾Select the required button. ¾¾Activate the Admin-Mode as described above. ¾¾Right-click the camera button. The context menu is displayed. ¾¾Click Edit. The Edit Button dialogue is displayed. ¾¾Make the required settings as described above Delete Camera Buttons Using the context menu camera buttons can be deleted. ¾¾Open the required map. ¾¾Select the required button. ¾¾Activate the Admin-Mode as described above. 18

19 ¾¾Right-click the camera button. The context menu is displayed. ¾¾Click Delete. ¾¾Confirm the subsequent info dialogue. 5.3 Activate Layers The different layers of a CAD or DWG file can be shown or hidden. ¾¾Open the required map. Fig Layers dialogue Layers button ¾¾Click the Layers button. The Layers dialogue is displayed. ¾¾Activate / deactivate the required layers in the On column. ¾¾Change the colour of a layer on the Color column if required. ¾¾Click the OK button in order to save the settings. 19

20 5.4 Delete Map A map can also be deleted. ¾¾Select the required map. ¾¾Login to the Admin-Mode as described above. Fig ¾¾Click Map > Delete. ¾¾Confirm the subsequent info dialogue. The map is removed. 5.5 Pathfinder Import The Pathfinder module can access the camera information in maps. For this, a map must be configured once. ¾¾Open the Admin-Mode as described above. ¾¾Select / load the required map. 20

21 Fig ¾¾Click File > Import for Pathfinder... The selected map is now configured for the Pathfinder module. ¾¾Repeat the process for all required maps. 5.6 Position the Map Module The positioning of the Map module in a monitor network is done via the options.ini file. In order to display the module always on the same place (on the same monitor), the file must be edited. ¾¾Open the options.ini file in a suitable editor via C:\Program Files > Dallmeier > SeMSy III > SeMSy Map. Fig ¾¾Edit the four last values in the row of MainForm (see below). ¾¾Save and close the file. 21

22 The first value (the first X value) specifies the first point of the module always depending on the monitor resolution. The resolution (width) of the preceding monitors have to be added (+ 1). The second value is the starting point on the screen to display the Map module (Y value). Normally, this is always 1. The third value is the last X value on the display monitor. So, all monitor resolutions (width) must be added. The fourth value specifies the height of the module. Example Four monitors (1920 * 1080) in the composite, the Map module should be displayed fullscreen on the fourth monitor: First value: 5761 ( ) Second value: 1 Third value: 7680 ( ) Fourth value: 1080 (complete height of resolution) 5.7 Customize View The View menu enables to customize the view of the Map module. ¾¾Login to the Admin-Mode as described above. Fig Statusbar Toolbar ¾¾Open the View menu. ¾¾Select the required options (see in the following). Hide Toolbar Enable this option to hide the toolbar. 22

23 No Border Enable this option to position the Map module fix on a monitor and display it in full-screen mode. Allow Zooming Enable this option to allow zooming in Maps. Stay on top Enable this option to keep the Map module always in the foreground. Show Statusbar Enable this option to display the statusbar. 5.8 Save Maps Locally In order to reduce loading times when changing maps, maps can be stored locally on a workstation. ¾¾Login to the Admin-Mode as described above. ¾¾Click Options > Copy all in Map-Dir. Fig All configured maps are copied to a local directory and are now automatically loaded from there into the module. 23