Configuration. English. Viewing Client

Transcription

1 Configuration English Viewing Client Rev /

2 Information about Copyright, Trademarks, Design Patents 2017 Dallmeier electronic The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. We reserve the right to make technical modifications. The manufacturer accepts no liability for damage to property or pecuniary damages arising due to minor defects of the product or documentation, e.g. print or spelling errors, and for those not caused by intention or gross negligence of the manufacturer. Dallmeier electronic GmbH & Co.KG Bahnhofstrasse Regensburg info@dallmeier.com All trademarks identified by are registered trademarks of Dallmeier electronic. All trademarks identified by *) are trademarks or registered trademarks of the following owners: Microsoft, Windows and DirectX from Microsoft Corporation headquartered in Redmond, Washington, USA Nvidia and CUDA from Nvidia Corporation headquartered in Santa Clara, California, USA Third-party trademarks are named for information purposes only. Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected. 2

3 Table of Contents 1 Introduction Validity Documents Typographical Conventions General Notes Appropriate Use Performance Features Warranty Login Login License Check Configuration General View Split Display Operation UDP Live Configuration Import or Export Login Default User Program Start Local Tracks Shoot Mirror Default File Name Recorder General Settings Add a Device Edit Device IP Address Connection Password Settings Relay Tracks Camera Control Panomera/Fisheye HotKeys Monitors External Applications VMS Server Interfaces Compression Audio Devices

4 5 User Management Create A New User Create A New Group Add User To A Group Change User Password Remote Configuration Device Time Restart File Transfer Files Configuration Protocol Latest reference picture set Tracks Delete Start / Stop

5 1 Introduction 1.1 Validity This document applies to the installation of the SMAVIA Viewing Client software. The descriptions in this document are based on the following software versions: Microsoft *) Windows *) 7/8/10 32 Bit / Microsoft Windows 7/8/10 64 Bit SMAVIA Viewing Client, Version Documents Data Sheet Detailed technical specifications and features of the software (for trained system integrators) Installation Instructions to install the software (for trained system integrators) Main Functions Instructions for the use of basic functions of the software (for operators without technical knowledge) Operation For instructions on using all features of the software (for operators without technical knowledge) Configuration (this document) Instructions for configuring the software (for trained system integrators) 1.3 Typographical Conventions This document may contain various warning words and symbols that indicate potential sources of danger: NOTICE NOTICE indicates practices for preventing property damage, incorrect configurations or faulty operations. For reasons of clarity and readability, various text formatting elements and types of emphasis are used in this documentation: Instructions are indicated by arrows ( ). ¾¾Carry out instructions one after the other in the sequence described. 5

6 Expressions in bold/italics generally indicate a control element on the device (switches or labels) or on its user interface (buttons, menu items). Paragraphs in italics provide information on basic principles, special features and efficient procedure as well as general recommendations. 6

7 2 General Notes 2.1 Appropriate Use The new HD-ready SMAVIA Viewing Client software provides you with a functional control tool for one ore more Dallmeier devices. SMAVIA Viewing Client provides many useful features and functions for video image display in the user area as well as for the administration. All the digital devices important user options can be accessed via LAN / WAN. Live picture transmission, backup, virtual tours or synchronisation are just some of the functions which make it easy to monitor with SMAVIA Viewing Client software. It is possible to trigger message display in the SMAVIA Viewing Client window through PGuard advance (central evaluation and management software for messages), The search and filter criteria set up on the device can be called up and used through SMAVIA Viewing Client. User-friendly functions ensure convenient operation. A variety of different picture compression processes and transmission codings (H.264, MPEG-4, H.261, Wavelet, MPEG-2 and JPEG) for live and archived pictures can be decoded. It also guarantees compatibility to all the rest of the Dallmeier product range. Within the Dallmeier video management system (SMAVIA Viewing Client, PGuard advance) SMAVIA Viewing Client takes the important role of a central managing element. SMAVIA Viewing Client can be installed on standard PCs (minimum: dual-core CPU; for system requirements see Data Sheet for SMAVIA Viewing Client at or on Dallmeier workstations. 2.2 Performance Features SMAVIA Viewing Client is characterized by the following functions and features: Access to SMAVIA Recording Server via Ethernet (LAN/WAN) Full support for Multifocal Sensor System Panomera Comfortable split management PRemote-HD function supported Live display and playback Full-HDTV with 16:9 display format Sophisticated navigation functions Extensive search functions Evaluation of VCA data possible PTZ camera control via GUI Auto update function via Ethernet (WAN) 2.3 Warranty The terms and conditions valid at the signing of the contract shall apply. 7

8 3 Login 3.1 Login SMAVIA Viewing Client is usually installed on a workstation / PC and starts automatically after booting the system. In addition, the user login normally is automatically via Autologin. If SMAVIA Vewing Client starts with enabled Autologin, it is still possible to enter the login dialog. Keep the left Ctrl key at the start of SMAVIA Viewing Client. When a manual start with login is required, proceed as follows: The factory-set User is Administrator. The factory-set Password is admin. NOTICE Risk of abuse by unauthorized users! ¾¾Change the factory-set Default user and the Default password as soon as possible (see Default User on page 18 and chapter User Management on page 48). ¾¾Start the workstation / PC. ¾¾Start SMAVIA Viewing Client. The Login dialog is displayed. Abb. 3-1 ¾¾Enter the User and the Password. ¾¾Confirm with OK. 8

9 The user interface is displayed depending on the chosen preferences. Abb. 3-2 ¾¾Make the required settings as described in the following. 3.2 License Check The basic license is included in the SMAVIA Recording Server. The basic license allows access from a SMAVIA Viewing Client with full functionality. A SMAVIA Viewing Client can only access one SMAVIA Recording Server with one basic license. If acquiring a floating license, the basic license to a floating license is converted. The floating license allows multiple SMAVIA Viewing Clients (according to the license number) to access to one SMAVIA Recording Server. If in the device list Dallmeier devices of the 3rd and 4 Generation are included and no compatibility dongle is connected the Dongle Options dialog is displayed. Abb. 3-3 There are 3 options: Option 1: Always continue without dongle With this option, you only have access to SMAVIA devices. The Dongle Options dialog no longer appears at launch the next time. ¾¾Enable this option if required. ¾¾Confirm with OK. 9

10 Option 2: Continue without dongle once This option provides unique access to the SMAVIA devices. The Dongle Options dialog reappears at launch the next time. ¾¾Enable this option if required. ¾¾Confirm with OK. Option 3: Unlock dongle by input of its serial number This option is needed for Dallmeier devices of the 3rd and 4 Generation. ¾¾Connect the compatibility dongle. ¾¾Enter the license code. ¾¾Confirm with OK. The dongle can be again enabled on the help button? (check dongle). 10

11 4 Configuration The configuration dialogs allow to edit general view settings and preferences for the startup. It can be configured recorders / cameras for the access with SMAVIA Viewing Client, default settings for image backups be set and camera controls defined. In addition, the behavior for events that are triggered by external programs, and the definition of hotkeys for the operation can be managed. The Configuration dialog can only be opened, if no recorder / camera is active in SMAVIA Viewing Client. ¾¾First, disconnect all active connections if required. ¾¾Open the Configuration dialog via Program > Configuration... The Configuration dialog is displayed. Abb. 4-1 ¾¾Select the required tab. ¾¾Make the required settings as described below. ¾¾Finally, confirm with OK in order to save the setttings. 11

12 4.1 General The General tab allows general settings of the user interface, of the application language, for displaying splits, for text overlays and for the opeartion to be made. In addition, configuration files can be imported or exported. ¾¾Open the General tab via Program > Configuration... > General. Abb View ¾¾Make the required settings as described below. ¾¾Finally, confirm with OK in order to save the setttings. In the View section settings of the SMAVIA Viewing Client presentation are made. Abb. 4-3 Language Here the user interface language can be changed. ¾¾Select from the Language drop down box the required option. 12

13 The user interface will be after saving the configuration dialog immediately converted without rebooting. Connection Monitor This option makes it possible to visualize the status of connections in an additional window next to the control panel. ¾¾Enable the Connection monitor check box if required. Double Split Display The Double split display option allows adding a further split view on the right side of the window (for example, for the presentation of additional data with POS systems). In addition, this option is required for the presentation of the SMAVIA Viewing Client on two monitors Split ¾¾Enable the Double split display check box. ¾¾Select from the Splits on right side drop down box the required option. This section allows to set options for displaying splits. Abb. 4-4 Border Splits can be presented with different borders or without borders. ¾¾Select from the Border drop down box the required option. GPU Acceleration (Nvidia CUDA) If the workstation has graphics cards with NVIDIA *) CUDA *) technology compute-intensive processes for the presentation can be taken from the GPUs. ¾¾Enable the GPU Acceleration (Nvidia CUDA) check box if required. Not all graphics cards are compatible. Contact the Dallmeier support if required. Use DirectX With this option compute-intensive processes for displaying will be outsourced to DirectX *) - enabled graphics cards. ¾¾Disable this option if required. Not all graphics cards are compatible. Disable this option when it comes to display problems. Contact the Dallmeier support if required. 13

14 Intel GPU GPU Acceleration (Nvidia CUDA) If the workstation has graphics cards with Intel *) technology compute-intensive processes for the presentation can be taken from the GPUs. ¾¾Enable the Intel GPU check box if required. Not all graphics cards are compatible. Contact the Dallmeier support if required. Display Mode The Display Mode option allows to either maintain the original aspect ratio of the split (Aspect Ratio) or adapt it to the complete split display (Fit to Split). ¾¾Select the rquired option from the Display Mode drop down box. Aspect Ratio Here, the aspect ratio of the split display can be set. ¾¾Select the required option from the Aspect Ratio drop down box. DirectX Features If the Use DirectX option is enabled the DirectX performance can be customized here. ¾¾Select the required option from the DirectX features drop down box Display The Display section allows to define options for data overlays (camera name, time, size, etc.) in the split screen. Abb. 4-5 Always Show Sensor Grid This option allows the display of defined detection areas on the screen. ¾¾Enable the check box if required. Show Milliseconds If this option is enabled, the time display is extended to milliseconds. ¾¾Enable the check box if required. 14

15 Show recording state With this option enabled, an icon in the upper right corner of the display indicates whether the camera is recording or not. ¾¾Enable the check box if required. Display SEDOR arm / disarm icon SMAVIA Recording Server software allows for the deactivation (disarmed) and activation (armed) of the SEDOR analysis applications by contact events. The status of the analysis application can be indicated by an icon in the upper right corner of the display, if the the camera is in live mode. ¾¾Enable the check box if required. Display Duration Define here the display time (in milliseconds) of text overlays. ¾¾Enter the required time period. Show descriptions Here different settings are offered for the kinds of information on display. ¾¾Select the necessary kinds of information for display, using the checkboxes. Position With this option the position of data overlays is set in the display. IIf no information data should be displayed on the screen, the setting None must be selected in the drop down menu. ¾¾Select the required option from the Position drop down box. Font Size The font size of text overlays can be customized. ¾¾Select the required option from the Font size drop down box. 15

16 4.1.4 Operation In this area, options for zoom operation and track playback can be set. Abb. 4-6 Show Pictures During Slider Movement This option allows for a quick search in a track (with slider) to display the individual images while moving. ¾¾Enable the check box if required. Digital PTZ Control Without Panel If this option is enabled it can be comfortably zoomed in and out with the mouse wheel in a split view. ¾¾Enable the check box if required. Digital PTZ Control Thumbnail If this option is enabled a thumbnail image in the split will be displayed when zooming, in which the image can be moved quickly. ¾¾Enable the check box if required. Fluid Revers Playback This option enables smooth playback at a reverse search. ¾¾Enable the check box if required. PView Drag&Drop Mode If this option is enabled the connenction is copied at a split exchange by drag and drop, so that is active in two splits. If this option is disabled, the connection is changed from one to another split (split exchange). ¾¾Enable the PView Drag&Drop Mode check box if required UDP Live Enabling these options, it is possible to decode incomplete frames as also frames without beginning and to display them. Abb. 4-7 ¾¾Enable the required options if required. 16

17 4.1.6 Configuration Import or Export Configuration settings can be as a file imported or exported in the Configurations area. All SMAVIA Viewing Client user must have write access in the following windows storage paths for configuration and dongle license: Windows XP: C:\Documents and Settings\All Users\Application data\dallmeier\smavia Viewing Client Windows 7/10: C:\ProgramData\Dallmeier\SMAVIA Viewing Client Abb. 4-8 Export ¾¾Click Export. ¾¾Select the target directory in order to save the file in the Windows Explorer. ¾¾Enter the file name. ¾¾Click the Save button. Import ¾¾Click the Import button. ¾¾Select the relevant directory of the file to be imported in the Windows Explorer. ¾¾Select the file. ¾¾Click Import. ¾¾Confirm the subsequent info dialog: Abb. 4-9 ¾¾Click OK in order to close the Configuration dialog. ¾¾Select Program > Finish in order to close the SMAVIA Viewing Client. ¾¾Start the SMAVIA Viewing Client again in order to complete the import of the configuration data. After the boot process is the SMAVIA Viewing Client with the imported parameters available. 17

18 4.2 Login The Login tab allows to define settings for the program start. So can be set for example, presets for the startup or the search enabled for updates of the SMAVIA Viewing Client. In addition, the Default user for the automatic logon process can be changed here. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Login tab. Abb ¾¾Make the required settings (see below). ¾¾Finally, confirm with OK in order to save the setttings Default User In the Login section the automatic login (Autologin) with a Default user at startup can be defined. By default, the automatic login with the factory-set login data is enabled. New users can be created and edited in the user management (see chapter User Management on page 48). NOTICE Risk of abuse by unauthorized users! ¾ ¾ Change the factory-set Default user and the Default password as soon as possible. 18

19 Abb ¾¾Activate or deactivate the Autologin checkbox. ¾¾Enter the new Default user if required. ¾¾Enter the associated Default password if required Program Start This section allows to configure of certain default values for the program start. Abb Preset If the Preset checkbox is enabled, SMAVIA Viewing Client starts with a configured preset (see documentation Operation SMAVIA Viewing Client). ¾¾Enable the Preset check box. ¾¾Select the required preset from the drop down box. Complete split views with the activated cameras / recorders can be saved as presets. Maximise SMAVIA Viewing Client automatically This option allows to launch SMAVIA Viewing Client in full screen mode. ¾¾Enable the check box if required Check For Updates If this option is enabled it will be searched for software updates at program start automatically. Check Dongle If this option is enabled, the licenese dongle is checked every time at program start. Numbers of instances to be launched Here, the number of instances to be lauchned of SMAVIA Viewing Client at program start can be determined, if necessary. 19

20 4.3 Local Tracks The backup of the local tracks can be configured on the Local tracks tab. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Local tracks tab. Abb Shoot ¾¾Make the required settings (see below). ¾¾Finally, confirm with OK in order to save the setttings. The Shoot section allows configuration of options for image backup (shoot track). This option is relevant for wavelet devices (3rd generation). Abb Size Of One Picture Definition of the file size (maximum 64 KB) for an image to save. 20

21 Number Of Pictures To Be Saved This option allows to specify the number of images that can be saved on a track. Path The Path option allows to define a directory in which the images are stored. Total Track Size The space required for the above configurations will be displayed. Ring Buffer This option enables operation of the local track as a ring buffer. If a track is defined as a ring buffer, it will be described continuously and periodically overwritten again and again Mirror The Mirror section allows configuration of options for the mirror track backup. This option is relevant for wavelet devices (3rd generation). Note that from a split with activated PRemote connection no mirror track recording can be saved. Abb Size Of One Picture Definition of the file size (maximum 64 KB) for an image to save. Number Of Pictures To Be Saved This option allows to specify the number of images that can be saved on a track. Path The Path option allows to define a directory in which the images are stored. Total Track Size The space required for the above configurations will be displayed. Ring Buffer This option enables operation of the local track as a ring buffer. If a track is defined as a ring buffer, it will be described continuously and periodically overwritten again and again. 21

22 4.3.3 Default File Name The Default file name section allows to set default directories for the various export options of image backups for the modes PRemote recording, Backup, Export and Mirror. This option is only relevant for H.264 devices (4th generation). Abb Settings For The required backup mode PRemote recording, Backup, Export, Mirror musst be selected in the drop down menu. Settings: Use Default File Name If the image backups are exported without demand in a particular directory, the check box Default file name must be enabled to use. Path Set here the default directory for the image backup of the respective mode. File Name The drop-down menu allows to choose for the file name between the templates Current Time or Recorder name Current Time. Always Use Original Version This option allows storing uncompressed frames in bitmap format in backup mode Export without prompting (see chapter Image Export in the documentation Operation SMAVIA Viewing Client). 22

23 4.4 Recorder The Recorder tab allows to define recorders and cameras for access in a SMAVIA Viewing Client. In addition, settings can be checked and changed from devices already installed. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Recorder tab. Abb ¾¾Make the required settings (see below). ¾¾Finally, confirm with OK in order to save the settings. 23

24 4.4.1 General Settings All Recorders If the Establish a new connection if lost option is activated, attempts an abort of the connection automatically reestablish the connection. The RDT connection is standard gateway option allows the connection build by default via ISDN/modem in contrast to a LAN connection. If the Live display when connected option is activated, always the live image of the device / camera appears when a connection is established. The option APR-Mode allows to record to UVV Kassen guidelines. The transfer of audio data can be enabled with the option Default audio transmission. With the Auto Clipping/Rotation option, active areas (image snippets) can be transferred from IP cameras. If this option is disabled, the information is not observed and the complete image is displayed. With the Force encrypted credentials option all login processes are transmitted in encrypted form. Wavelet Recorders The Image fast playback option allows to set the number of images for fast forward playback. In order that it is possible to regulate the speed of fast reproduction. The Max. live images /sec. option allows you to specify the number of images for live playback. This makes it possible to regulate the data rate of a connection. PRemote Recorders If the Establish a new connenction if lost option is enabled, the connection is automatically restored when an interrupt. If the Low Delay option is enabled the time delay in the live image display is reduced. If it comes in fast moving sequences to an unclean representation, this option should be disabled. The Activate mixer control option allows that the unused devices in the operating system are automatically enabled or disabled during an audio transmission. If the Transfer mouse buttons via PRemote option is enabled mouse clicks are sent to the device (option is only available for wavelet device). The Audio active by default option allows for a PRemote connection automatically establish an audio connection. DIS Recorders The Accurate time positioning option allows a precise slider search at DIS devices. ¾¾Make the required settings. ¾¾Finally, confirm with OK in order to save the settings. 24

25 4.4.2 Add a Device A new device will be added through a setup wizard. It will be automatically retrieved all the settings of the Edit recorder dialog gradually. With this option, it is possible to add Dallmeier or 3rd party ONFIV cameras as well. It is possible to search the network for devices using the IP Scanner. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Recorder tab. ¾¾Click New. The Name dialog is displayed. Name ¾¾Enter an appropriate name for the recorder / camera. Abb Device type ¾¾Select the appropriate Device type. IP Scanner With the IP Scanner it is possible to search the network for devices, according to determined parameters. Dallmeier Broadcast lists all available devices according to the selected interface, whereas Dallmeier DaVid TCP makes it enables searching in a certain IP interval. ¾¾Select the necessary IP Scanner The according dialog opens. 25

26 Broadcast Scan Abb ¾¾Select the necessary Interface. ¾¾Click Scan. ¾¾If necessary select an appropriate Filter. ¾¾Click OK. IP-Scan Abb ¾¾Enter the IP range you want to search. ¾¾Click Scan. ¾¾If necessary select an appropriate Filter. ¾¾Click OK. The Name and IP-Adress dialogs are filled automatically. 26

27 The IP-Address dialog is displayed. Abb ¾¾Enter the IP address. ¾¾Make the required settings (see below). Slow Network The option allows the use of a device over a slow network connection (with low network bandwidth). This option is only available for Wavelet device (3rd generation). Network With Routers (NAT) If the device is integrated into the network through a router this option must be enabled. If the option is enabled the TCP network protocol is used to transfer data. If disabeld the UDP protocol is used. Live Multicast The option integrates DIS-2 devices or IP cameras over a multicast network (multi-point connection). Live Stream Source If the Use IP device directly option is activated the stream is transferred directly from the IP camera when connecting an IP camera (HD and SD) about a device. If the Use recorder as proxy option is enabled the stream is transferred form the device when connecting an IP camera (HD and SD) about a device. ¾¾Finally, click Next. The Connection dialog is displayed. 27

28 Abb ¾¾Make the required settings (see below). LAN ¾¾Activate this option if the device is in the same LAN network. No further settings are required. RAS ¾¾Activate this option if the device is integrated throug a dial-up connection. ¾¾Enter the Telephone number. ¾¾Enter the User. ¾¾Enter the Password. ¾¾Select the required RAS device. ¾¾Finally, click Next. The Password dialog is displayed. Abb ¾¾Make the required settings (see below). 28

29 Extended Login If this option is enabled, the login process is done by querying the user name and password for each connection. The Extended login can be combined with the Automatic login option and the user name and password for the automatic login can be saved. Double Authentication Two user logins are queried at each connection. If this option is enabled no automatic logon process is possible. Automatic Login This option allows you to save the password for an automatic group registration. There is no query during the connection establishment process. Note the documentation and the settings of the respective recorder / the respective camera to the options of the Password tab. ¾¾Finally, click Next. The Settings dialog is displayed. Abb ¾¾Make the required settings (see below). Enable CVBS Monitor Switching This option allows to display a live image or playback on a connected CVBS monitor. Live Exclusive Without Regard For Recording If this option is enabled the image limitation is removed and used always the maximum number of images. This option is only for wavelet devices (3rd generation) which support the PRemote function. 29

30 Allow PRemote Connection The option allows to activate PRemote connections for a recorder (Coding is done in the format H. 261 / MPEG4) and support therefore low bandwidth for data transfer. Prefer PRemote On Remote Connection Request If this option is activated the live image on a PRemote connection is transmitted when the image display is triggered by an external application (e. g. PGuard advance). Transparent Channel If the Transparent channel option is enabled the channel on the required device is enabled with this option. In the drop-down menu the COM port must be selected in addition to which the external device is connected. Transparent channels can be activated for several devices. The device that is enabled in the split receives the command. Transparent Back Channel (Dominant) This option allows to forward data to SMAVIA Viewing Client received by a device via the serial interface. Close Relay On Connection This option allows the user to define a relay that closes when the device is activated to a transparent back channel connection. Activate Mirror Track Recording With Standard Connection This option automatically stores multiple image sequences on a hard drive. Activate Mirror Track Recording With PRemote Connection This option automatically stores multiple image sequences on a hard drive at a PRemote connection. Allow disarm If this option os activated, a temporal deactivation of the SEDOR analysis application is possible. ¾¾Finally, click Next. The Relay dialog is displayed. 30

31 Abb ¾¾Enable the Request relay status check box if required. ¾¾Enter an name for the respective relay. ¾¾Finally, click Next. The End dialog is displayed. Abb ¾¾Enable the Check recorder access checkbox if required. ¾¾Click Finish. The new device is displayed in the Recorder list. 31

32 4.4.3 Edit Device The configuration of devices can be changed via the Edit recorder dialog. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Recorder tab. ¾¾Select the required device. ¾¾Click Edit. The Edit recorder dialog is displayed with the Name tab. Abb ¾¾Customize the name if required. ¾¾Click OK in order to save the settings. 32

33 IP Address The IP-Address tab allows to change the IP address of the device and configure network settings. ¾¾Select the IP-Address tab. Abb ¾¾Change the IP address if required. ¾¾Select the required options (see above). ¾¾Click OK in order to save the settings Connection The Connection tab allows to define a network connection. ¾¾Select the Connection tab. Abb ¾¾Make the required settings (see above). ¾¾Click OK in order to save the settings. 33

34 Password The Password tab allows to configure login options for the device. ¾¾Select the Password tab. Abb Settings ¾¾Make the required settings (see above). ¾¾Click OK in order to save the settings. The Settings tab allows the configuration of general settings of the device to monitor switching, PRemote connection and transparent channel. ¾¾Select the Settings tab. Abb ¾¾Make the required settings (see above). ¾¾Click OK in order to save the settings. 34

35 Relay The Relay tab enables the use of the device relays. In addition, individual names for the relays can be entered. ¾¾Select the Relay tab. The Relay tab is displayed. Abb Tracks ¾¾Aktivate the Request relay status checkbox. ¾¾Enter names for the relays if required. ¾¾Click OK in order to save the settings. This feature simplifies the search on slow networks. For this purpose, two tracks are joined together to record at different qualities. An event is searched for in the track with lower quality. The track with the higher quality is then used to display. This function is only available for wavelet devices (3rd generation). ¾¾Select the Recorder tracks tab. 35

36 Abb ¾¾Select the track for high quality in the All tracks field. ¾¾Select the track for low quality from the drop-down box. ¾¾Click OK in order to save the settings. 4.5 Camera Control The Camera control tab allows the configuration of the control functions of PTZ cameras. These can then be operated via SMAVIA Viewing Client. This function is available for Dallmeier devices from 3rd generation. PTZ Cameras ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Camera control tab. 36

37 Abb ¾¾Select the required camera from the Recorder / Camera list. ¾¾Select the required Camera type. ¾¾Select the required Protocol. ¾¾Enter the Camera ID. ¾¾Select the Interface. ¾¾Selet an Alarmposition if required. A camera preset can be set as an Alarmposition. This preset is activated when an alarm event is triggerd by an external application (e. g. PGuard). The Camera ID is required to uniquely identify the camera. UTC Cameras Pre-requirements for the use of the UTC function: Wavelet devices (3rd generation) must be equipped with the frame grabber card FG11, H.264 devices (4th generation) with a UTC module. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Camera control tab. The Camera control tab is displayed. ¾¾Select the required camera from the Recorder / Camera list. ¾¾Select the required Camera type. ¾¾Select CamInPix_V20 for the Protcol. ¾¾Set 1 for the Camera ID. 37

38 ¾¾Select UTC for the Interface. The Alarmposition field is without function at UTC cameras. 4.6 Panomera/Fisheye Under the Panomera/Fisheye tab one can adjust certain settings for those camera types. ¾¾Open the Configuration dialog using Programm > Configuration... ¾¾Select Panomera/Fisheye. Abb Split selection for Panomera detail view Here the behavior when opening Panomera detail view is set up with the radio buttons. Digital PTZ SMAVIA Viewing Client simulates digital controls analogue to those of PTZ cameras, in order to simplify controlling fisheye cameras. The Pan/Tilt speed can be regulated with the slider. It is automatically reduced the more you zoom into the picture (proportionally to the zoom factor). This setting can be deactivated by unchecking the Zoom adaptive pan/tile speed checkbox. ¾¾Make the necessary adjustments. ¾¾Click the OK button. 38

39 4.7 HotKeys The HotKeys tab allows to specify custom keyboard shortcuts to control SMAVIA Viewing Client. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the HotKeys tab. Abb ¾¾Select the required Category from the drop-down menu. ¾¾Select the required command from the Commands list. ¾¾Enter the New hotkey. ¾¾Click the Accept button. The Default button resets all shortcuts back to the default state. 4.8 Monitors The Monitors tab allows the direct connection of an IP camera to a CVBS monitor. For this purpose the CVBS monitor must be connected to a decoder (e. g. DIS-2 Multi-D). The connection to this decoder can be configured here. The Enable CVBS monitor switching function must be activated for the device (see Enable CVBS Monitor Switching on page 29). ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Monitors tab. 39

40 Abb ¾¾Click New. The Name tab is displayed. Abb ¾¾Enter an appropriate name. ¾¾Select the correct Device type. ¾¾Click Next. 40

41 The IP-Address tab is displayed. Abb ¾¾Enter the IP address. ¾¾Click Next. The Password tab is displayed. Abb ¾¾Make the required settings (see above). ¾¾Click Finish. 41

42 4.9 External Applications The External applications tab allows to set the behavior when using external programs (e. g. PGuard advance). ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the External applications tab. Abb ¾¾Make the required settings (see below). ¾¾Finally, click OK. Split Selection The Split selection section allows to define which split is used in activation of external applications. Abb

43 Alaways Use This Split If this option is enabled the split is used which has been entered in the Split No. field. Use Free Split Otherwise This Split This option uses the first free split. Is not a free split available it will be switched to the split which has been entered in the Split No. field. Always Use Active Split It uses always the active split. Use Free Split Otherwise Next One If this option is enabled the first free split is used. Is not a free split available, is brought up to the next according to the active split. Use Only Free Split The option use always a free split. When no free split is available there is no connection. Quality This section sets the image quality at remote setup of wavelet devices (3rd generation). Abb ¾¾Set the image quality from 0 to 4. The value 0 provides the highest quality and value 4 the lowest quality. Local Recording When Switching To A Live Stream This section allows to configure the local recording at the connection after an alarm event. Abb No Local Recording If this option is enabled the activated images are not saved. Save First Pic To Shoot Track The first image of the activation is saved in the shoottrack when an alarm event is triggerd. Activate Mirror The complete image activation is saved in the mirror track when an alarm event is triggerd. SMAVIA Viewing Client Activation SMAVIA Viewing Client can be automatically displayed in the foreground when activations from external applications are triggered. 43

44 Abb ¾¾Activate the Display SMAVIA Viewing Client in the foreground with external command checkbox VMS Server The VMS server tab allows the configuration of the connection between SMAVIA Viewing Client and a VMS server for the autobackup feature. The autobackup function is not available in the current version of SMAVIA Recording Server Appliances. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the VMS server tab. Abb ¾¾Activate the Connect checkbox. ¾¾Enter the IP address of the VMS server. ¾¾Enter the Port number. ¾¾Click OK. The VMS server is part of the autobackup feature of SMAVIA Viewing Client. This extension must be installed separately. Note the SMAVIA Viewing Client Autobackup documentation. 44

45 4.11 Interfaces On the Interfaces tab a data channel to control devices (such as a dome camera) can be established. Example: Command is sent from an external controller via SMAVIA Viewing Client to a device and passed from there to a dome camera. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Interfaces tab. Abb ¾¾Enable the Active check box. ¾¾Select the COM Port on PC to which the external control unit is connected. ¾¾Select the Baud rate. ¾¾Click OK. Thus, the commands can be assigned to a device, the device must be switched on and configured accordingly (see Transparenter Kanal on page 30). 45

46 4.12 Compression This function is only available for Wavelet devices (3rd generation). The Compression tab allows a time-dependent adjustment of image compression for live activations. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Compression tab. Abb The value 0 is the lowest level of compression (best image quality). ¾¾Select the Compression level. ¾¾Drag a rectangle over the desired time range with the mouse. ¾¾Repeat the first two steps for other time periods if required. ¾¾Finally, click OK in order to save the settings. 46

47 4.13 Audio Devices The Audio Devices tab allows devices to test audio settings and configure. ¾¾Open the Configuration dialog via Program > Configuration... ¾¾Select the Audio Devices tab. Abb Test Audio IN In the Test Audio IN area an audio stream can be checked. ¾¾Make sure that the audio stream can be received. ¾¾Click Start Audio IN. ¾¾Check the display. ¾¾Click Stop Audio IN in order to stop the test. Test Audio OUT The output of audio streams can be checked in the Test Audio OUT area. ¾¾Select the required Audio OUT option. ¾¾Click Start Audio OUT. ¾¾Set the Volume. ¾¾Click Stop Audio OUT in order to stop the test. 47

48 5 User Management The User Management dialog allows creating new users and assign users to groups that have been equipped with different permissions. In addition, passwords of users can be changed here. 5.1 Create A New User ¾¾Open the User Management dialog via Program > User Management... The User Management dialog is displayed. ¾¾Select the User tab. Abb. 5-1 ¾¾Click New. The New user dialog is displayed. Abb. 5-2 ¾¾Enter user name. ¾¾Enter password. ¾¾Confirm the password. ¾¾Click OK in order to save the settings 48

49 The new user is displayed in the User list. Abb. 5-3 Delete A User ¾¾Select the required user. ¾¾Click Delete. ¾¾Confirm the subsequent info dialog 5.2 Create A New Group ¾¾Open the User Management dialog via Program > User Management... The User Management dialog is displayed. ¾¾Select the Groups tab. Abb. 5-4 ¾¾Click New. The Groups dialog is displayed. 49

50 Abb. 5-5 ¾¾Enter a name for the new group. ¾¾Click OK in order to save the settings. The new group is displayed in the Group list. Abb. 5-6 The permissions can now be assigned through the Rights field for the new group: ¾¾Select the required Group. ¾¾Activate the required Rights. ¾¾Click OK in order to save the settings. Delete A Group ¾¾Select the required group. ¾¾Click Delete. ¾¾Confirm the subsequent info dialog. 50

51 5.3 Add User To A Group ¾¾Open the User Management dialog via Program > User Management... The User Management dialog is displayed. ¾¾Select the User tab. Abb. 5-7 ¾¾Select the required User. ¾¾Activate the required Group. ¾¾Click OK. 5.4 Change User Password Passwords from users can be changed. ¾¾Select the required User. ¾¾Click Edit. The New password dialog is displayed. Abb. 5-8 ¾¾Enter the new password and confirm ist in the secodn field. ¾¾Click OK in order to save the settings. 51

52 6 Remote Configuration Device The Recorder menu allows remote access to device functions. Track recordings can be started, stopped and deleted. In addition, the device time can be defined, the device restarted and re-configured through a file. The required device must be enabled to view the menu Recorder. 6.1 Time The Recorder time dialog allows to change date and time. ¾¾Open the Recorder time dialog via Recorder > Set recorder time. Abb. 6-1 ¾¾Click Set system time if required. or ¾¾Set New recorder time if required. ¾¾Click Set recorder time. ¾¾Click Close in order to close the dialog. With the Set system time option the device is automatically synchronized with the current SMAVIA Viewing Client system time. 6.2 Restart The Restart recorder dialog provides options for the restart of the device. ¾¾Open the Restart recorder dialog via Recorder > Restart. Abb. 6-2 The Restart recorder program option restarts only the device program. The Restart recorder program and delete all tracks option initialize the device completely. 52

53 NOTICE Data loss! The Restart recorder programm and delete all tracks option deletes all tracks even the standard tracks. The Restart recorder system option allows a restart of the device. ¾¾Select the required setting. ¾¾Click OK. 6.3 File Transfer Files any files, the configuration file of the device and the device protocol can received by the device and transmitted to the device Files In order to receive a file from the device proceed as follows. ¾¾Open the Receive file from recorder dialog via Recorder > Files transfer > Get file. Abb. 6-3 ¾¾Enter the File path on recorder. ¾¾Enter the File path on this computer. ¾¾Click OK. The file is stored in the directory specified in the File path on this computer field. In order to send a file to the device proceed as follows. ¾¾Open the Send file to recorder dialog via Recorder > Files transfer > Send file. The Send file to recorder dialog is displayed. ¾¾Enter the File path on this computer. ¾¾Enter the File path on recorder. ¾¾Click OK. 53

54 The file is stored in the directory specified in the File path on recorder field Configuration In order to receive the configuration file (tank.par) of the device proceed as follows. ¾¾Open the Receive configuration from recorder dialog via Recorder > Files transfer > Get configuration. Abb. 6-4 ¾¾Enter the File path on this computer. ¾¾Click OK. The configuration file is stored in the directory specified in the File path on this computer field. Now the file can be unpacked and edited. NOTICE Hardware damage! ¾¾Changes to the configuration file should be used by trained and authorized personnel are carried out. In order to send a configuration file to the device proceed as follows. ¾¾Open the Send configuration to recorder dialog via Recorder > Files transfer > Send configuration. The Send configuration to recorder dialog is displayed. ¾¾Enter the File path on this computer. ¾¾Click OK. The configuration file is sent to the device. ¾¾Restart the device in order to run the configuration file Protocol The protocol (protocol.txt) can be received from the device and evaluated. 54

55 ¾¾Open the Receive protocol from recorder dialog via Recorder > Files transfer > Get protocol. Abb. 6-5 ¾¾Enter the File path on this computer. ¾¾Click OK. The protocol file is stored in the directory specified in the File path on this computer field. The file can now be evaluated Latest reference picture set You can export the latest reference picture set into a PDF file and save it to your harddisk. ¾¾Open the Get latest reference picture set (pdf) dialog via Recorder > Files transfer > Get latest reference picture set (pdf). The dialog Receive reference picture set (pdf) set from recorder is shown. ¾¾Enter the desired File path on this computer. ¾¾Click OK. The PDF file will be saved in the folder specifed under File path on this computer. 6.4 Tracks Tracks/recordings can be started, stopped and deleted Delete To delete a track proceed as follows. ¾¾Open the Select track to be deleted dialog via Recorder > Delete track. 55

56 Abb. 6-6 ¾¾Select the required track. ¾¾Click Delete. ¾¾Click Finish in order to close the dialog. Multiple tracks can be deleted at once. Select multiple tracks with the Shift or CTRL key Start / Stop Recordings on the device can completely (all tracks) or for each track started and stopped. Start / Stop Recording Of All Tracks In order to stop all recordings on the device proceed as follows. ¾¾Click Recorder > Stop recording (all tracks). In order to restart all recordings on the device proceed as follows. ¾¾Click Recorder > Start recording (all tracks). If all recordings are stopped by the SMAVIA Viewing Client function Stop recording (all tracks) the complete track recording can only be resumed by the SMAVIA Viewing Client function Start recording (all tracks). Stop Recording Of A Single Track In order to stop a recording of a single track proceed as follows. ¾¾Open the Stop recording temporarily (single track) dialog via Recorder > Stop recording (single track). Abb. 6-7 ¾¾Select the required track. 56

57 ¾¾Click OK. The recording of the track is stopped. Start Recording Of A Single Track In order to stop a recording of a single track proceed as follows. ¾¾Open the Start recording temporarily (single track) dialog via Recorder > Start recording (single track). The Start recording temporarily (single track) dialog is displayed. ¾¾Select the required track. ¾¾Click OK. The recording of the track is started. 57