Downloading Metasys Integrator 300 Series Code

Transcription

1 M-Tool Manual 693 System Tools Applications Section Issue Date 0101 APPLICATION NOTE Downloading Metasys Integrator 300 Series Code Downloading Metasys Integrator 300 Series Code...3 Introduction...3 Key Concepts...4 MIG300 Download... 4 M-Tool... 4 Direct Serial Connection... 5 Direct Serial Communications Checklist... 5 Procedure Overview...6 Detailed Procedures...7 Adding a Direct Serial Site for the MIG300 in Site Book... 7 Preparing a MIG300 for Download Downloading Code from M-Tool to a MIG Johnson Controls, Inc. Code No. LIT

2 2 System Tools Applications

3 Downloading Metasys Integrator 300 Series Code 3 Downloading Metasys Integrator 300 Series Code Introduction This document describes how to download the Metasys Integrator 300 Series (MIG300) code via a direct serial connection from M-Tool. References to necessary information on setting up direct serial connections are also provided. This document describes when to use the MIG300 Download and how to: add a Direct Serial Site for the MIG300 in Site Book prepare a MIG300 for download download code from M-Tool to a MIG300

4 4 System Tools Applications Key Concepts MIG300 Download The MIG300 ships with the latest code downloaded. New versions of code are not required for new revisions of the Metasys system, however, a new version of code may be needed to: take advantage of the most current vendor application enhancements and new vendor applications. See the Metasys Integrator vendor specific application note for Metasys Integrator software/firmware (code) release requirements. download custom code IMPORTANT: Contact the developer of your custom built code before upgrading the code to avoid losing the custom capabilities. The Metasys Integrator Commissioning menu indicates if the code is standard or custom. See Using the Commissioning Menu in the Metasys Integrator 300 Series Commissioning Technical Bulletin (LIT ) for more information. To download.vct files and commission the database, see the Metasys Integrator 300 Series Commissioning Technical Bulletin (LIT ). M-Tool M-Tool is divided into two major groups of tools: System Tools - contains tools such as the Project Builder, M-Pro, Site Book, MIG Download, and Loader components. Configuration Tools contains software tools, such as HVAC PRO software, used to support N2 based field controllers.

5 Downloading Metasys Integrator 300 Series Code 5 Direct Serial Connection A direct serial connection provides a means to communicate directly from a Personal Computer (PC) to a MIG300 via the PC s serial port. Specific operating systems have different steps to set up the initial direct connection. Where this document mentions setting up direct connect in Site Book, it is assumed you have done the initial setup in Windows 98 or Windows NT software. For more information on setting up direct connect for a specific operating system, see the Direct Connect and Dial-Up on Windows 98 Application Note (LIT ) or the Direct Connect and Dial-Up on Windows NT Application Note (LIT ). Direct Serial Communications Checklist Setting up communications between a PC and a MIG300 is a multi-step process. Table 1 is a guide to verify all the steps required for successful communications are complete. Table 1: Direct Serial Communications Checklist Step Task Completed 1 For information on dial-up and direct connect, see Direct Connect and Dial-Up in Windows 98 Application Note (LIT ) or Direct Connect and Dial-Up in Windows NT Application Note (LIT ). Use a baud rate for the MIG Go to the Site Book and define a MIG300 site using the name of the direct serial connection s network connection icon. See Adding a Direct Serial Site for the MIG300 in Site Book in this document. 3 Prepare the MIG300 to accept the download. See the Preparing a MIG300 for Download section in this document. 4 Download code to the MIG300. See the Downloading code from M-Tool to a MIG300 section in this document.

6 6 System Tools Applications Procedure Overview Table 2: Downloading the MIG300 To Do This Add a Direct Serial Site for the MIG300 in Site Book Prepare a MIG300 for Download Download Code from M-Tool to a MIG300 Follow These Steps: Note: Before adding a direct serial connection to the Site Book, Microsoft Dial-Up Networking must be installed and configured on the PC, and a Network Connection Icon or Windows phonebook entry must be defined for the MIG300 with a baud rate of On the Windows Start menu, select either Programs > Johnson Controls > M-Tool > System Tools > Site Book or, Programs > Johnson Controls > BACnet OPC > Site Book. 2. Click the Add button. 3. Select Direct Serial and click OK. 4. Fill in the fields on the Serial Connection Information Screen according to Table 3 and click OK. 5. If necessary, edit the fields of the Basic Parameters screen according to Table Click Close to save changes and exit Site Book. 1. Set up a direct serial connection from the PC with M-Tool to the MIG300 commissioning port that you wish to download. 2. Use a VT100 Terminal Emulator on the PC with M-Tool to connect to the MIG On the MIG300 Commissioning screen, select Advanced Diagnostics. 4. Press the F3 Reset key. 5. Press the space bar to scroll through the available commands until RESET TO DOWNLOAD A CODE UPDATE appears. 6. Press the enter key. 7. When the red Fault LED on the MIG300 comes on, close VT100 Terminal connection. Note: Do not disconnect the serial cable between the MIG300 and the PC. 1. On the Windows Start menu, select Programs > Johnson Controls > M-Tool > System Tools > MIG Download. 2. Select the site defined for the MIG300 download from the list and click OK. 3. Browse to the directory where the MIG300 Download files are stored and select the MIG code that you want to download. 4. Click OK.

7 Downloading Metasys Integrator 300 Series Code 7 Detailed Procedures Adding a Direct Serial Site for the MIG300 in Site Book Before adding a direct serial connection to the Site Book, Microsoft Dial-Up Networking must be installed and configured, and a Network Connection Icon or Windows phonebook entry must be defined with a baud rate of for the MIG300. See the Direct Connect and Dial-Up on Windows 98 Application Note (LIT ), or the Direct Connect and Dial-Up on Windows NT Application Note (LIT ) in the N30 Supervisory Controller System Communications Manual (FAN 689.3) for more information. Note: See the Direct Serial Communications checklist in this document for an overview of the process to create and define direct serial communications. To add a direct serial connection site to Site Book: 1. On the Windows Start menu, select either Programs > Johnson Controls > M-Tool > System Tools > Site Book or, Programs > Johnson Controls > BACnet OPC > Site Book. The Site Book s main screen appears (Figure 1). If this is the first time you are running Site Book, all fields are blank. Figure 1: Site Book Main Screen

8 8 System Tools Applications 2. Click the Add button. The Choose a Connection Type screen appears (Figure 2). Figure 2: Choose a Connection Type Screen 3. Select Direct Serial and click OK. The Serial Connection Information screen appears (Figure 3). Figure 3: Serial Connection Information Screen 4. Fill in the fields on the Serial Connection Information screen according to Table 3 and click OK. Note: All Metasys Integrator units can use the same site name to download code.

9 Downloading Metasys Integrator 300 Series Code 9 Table 3: Serial Connection Information Screen Fields Field Default Notes Site Name Blank The Site Name can range from 1 to 32 characters. It must be unique and must be defined for each site. All Metasys Integrator units can use the same site name to download code. Windows Phonebook Entry New Windows Phonebook Entry Delete Windows Phonebook Entry Unique Network Number First phonebook entry in list N/A N/A Selects the appropriate dial-up Networking entry in the Windows phonebook that corresponds to this site. In Windows NT, this button allows you to access the Windows NT Dial-up Networking definition screens to add a new Windows phonebook entry. Note: In Windows 98 add a new phonebook entry through Dial-Up Networking. In Windows NT, this button allows access to the Windows NT Dial-up Networking screens to delete entries. Note: In Windows 98, delete a new phonebook entry through Dial-Up Networking. 100 The range is Login ID Blank Must match the PPP login ID in the MIG 300.* Password Blank Must match the PPP password in the MIG 300.* * The default login ID and password in MIG 300s are jci and If necessary, edit the fields of the Basic Parameters screen as required according to Table 4. Table 4: Direct Serial Configuration Screen Basic Parameters Field Default Notes System BACnet Defines system type. Currently limited to BACnet systems. Connection Direct Serial Set when adding a new site. The only choice applicable to a MIG300 download is Direct Serial. Network Number 100 Use the default value, 100. DataBase Path C:\Documents and Settings\All Users\ Application Data\Johnson Controls\M-Data This path serves no purpose for a MIG Download. Site Description Blank An optional site description of up to 125 characters can be entered here. Workstation Name Your computer s name Up to 20 characters of text. It must be unique for alarm notification. Workstation Number 1 From It must be unique for Alarm Notification. Connection Control User Requires explicit connect/disconnect command from user when using an M-Series Workstation. For direct connections, the connection control must be User. 6. Click Close to save changes and exit Site Book.

10 10 System Tools Applications Preparing a MIG300 for Download To download MIG300 code, the MIG300 must first be prepared for downloading. To prepare a MIG300 for download: 1. Set up a direct serial connection from the PC with M-Tool to the MIG300 commissioning port that you wish to download. Note: For more detailed information on setting up a direct serial connection, see the Metasys Integrator 300 Series Commissioning Technical Bulletin (LIT ). 2. Use a VT100 Terminal Emulator on the PC with M-Tool to connect to the MIG On the MIG300 Commissioning screen (Figure 4), select Advanced Diagnostics. The Advanced Diagnostics screen appears (Figure 5). Figure 4: MIG300 Commissioning Screen

11 Downloading Metasys Integrator 300 Series Code 11 Figure 5: MIG300 Advanced Diagnostics Screen 4. Press the F3 Reset key. 5. Press the space bar to scroll through the available commands until RESET TO DOWNLOAD A CODE UPDATE appears (Figure 6). Note: Record the configuration settings when upgrading an already commissioned Metasys Integrator. Record the settings manually or use a screen capture utility. See the Metasys Integrator 300 Series Commissioning Technical Bulletin (LIT ) for more information.

12 12 System Tools Applications Figure 6: MIG300 Reset to Download a Code Update Screen 6. Press the enter key. When the MIG is ready for the download, a message appears stating Proceed with the code download once the red Fault LED is on. 7. When the red Fault LED on the MIG300 comes on, close the VT100 Terminal connection so that M-Tool can use the communications port for download. Use the disconnect button or menu selection in the VT100 Terminal Emulator to disconnect. Note: Do not disconnect the serial cable between the MIG300 and the PC. Disconnect refers to breaking the communications link between the VT100 Terminal Emulator and the MIG300.

13 Downloading Metasys Integrator 300 Series Code 13 Downloading Code from M-Tool to a MIG300 To download code from M-Tool to a MIG 300: 1. On the Windows Start menu, select Programs > Johnson Controls > M-Tool > System Tools > MIG Download. The Advanced MIG Download screen appears (Figure 7). Figure 7: Advanced MIG Download Screen Note: MIG300 is the name of the sample site created in Adding a Direct Serial Site for the MIG300 in Site Book in this document. Add a site named MIG300 if you want MIG 300 to appear in the site list of the Advanced MIG Download screen (Figure 7). 2. Select the site defined for the MIG300 download from the list and click OK. The file open dialog appears. 3. Browse to the directory where the MIG Download files are stored and select the MIG code that you want to download. By default they are located at C:\Documents and Settings \ All Users \ Application Data \ Johnson Controls \ M-Data \ Shared \ OSCode. Note: The default location of MIG Download files when upgrading from M-Tool Release 1.x is C:\Program Files \ Johnson Controls \ System Tools \ Database \ Shared \ OSCode. 4. Click OK. The Load in Progress screen appears for the duration of the download (Figure 8).

14 14 System Tools Applications Figure 8: Load in Progress Screen 5. Click Close to exit the Load in progress screen. 6. After a download, the Close PPP Connection? dialog box appears (Figure 9). Figure 9: Close PPP Connection? Dialog Box 7. Select YES to close the PPP connection. Note: A second dialog box may appear after a successful download stating that the <site name> Connection Lost: Remote PPP Peer is Not Responding. However, the MIG300 is working properly. Disregard the error and Click OK.

15 Downloading Metasys Integrator 300 Series Code 15 Notes

16 16 System Tools Applications Notes Controls Group E. Michigan Street FAN 693 P.O. Box 423 M-Tool Manual Milwaukee, WI Release 2.0 Printed in U.S.A.