SunCast - User Guide. IES Virtual Environment 2013
|
|
- Carol Lloyd
- 5 years ago
- Views:
Transcription
1 SunCast - User Guide IES Virtual Environment 2013
2 Contents 1 Introduction to SunCast SunCast Features Getting Help Starting SunCast Application Bar Mode The Model View Model Browser Room Obstruction Status Surface Obstruction Status The Image View Copy an Image Save Image(s) Zoom All Images Create AVI Movie The Analysis View Overview Solar Energy Analysis Solar Exposure Analysis Methodology Notes Other Notes Simulation Setup Display Setup Results Persistence Load Save The SunCast Toolbar Load Settings Save Settings Select Zone(s) Image Script SunPath Sun Up/Down Times Sun Rise/Set Graph Solar Shading Analysis SunCast Menu Load Settings Save Settings VE 2013 SunCast 1
3 7.3 Load Shading Results Load Images Save Images Load AVI Movie Site Menu Location Plan Image Menu Single Image Timed Images Fly-Round Sun-view Images Calculation Menu Solar Shading for Apache Sun Up/Down Data Sun Up/Down Graph SunPath Options Menu Ground Plane Settings Surface/Shading Colours Clock Position in Images Model Obstructions View Menu Help Menu Miscellaneous Zoom to an Area of an Image Definition of Azimuth and Altitude Azimuth Altitude VE 2013 SunCast 2
4 1 Introduction to SunCast 1.1 SunCast Features SunCast can be used at any stage of the design process to perform shading and solar insolation studies and can generate images and animations quickly and easily from a model created by the IES ModelBuilder. SunCast can be used to investigate: External obstruction and self-shading of a building. Solar mapping through windows and openings. The effects of changing orientation of building. SunCast generates shadows and internal solar insolation from any sun position defined by date, time, orientation, site latitude and longitude. This shadow information can be stored for subsequent analysis by: Viewing shadows from any eye position. Animating the solar analyses by generating a sequence of images and creating an *.avi movie to send to your client. Making opaque surfaces "transparent" to permit the user to better view the solar insolation on internal surfaces e.g. removing roofs or surfaces to identify internal solar insolation paths. Displaying solar surface shading/insolation statistics. Output data for thermal simulation (see documentation on Apache). SunCast can be used in a variety of studies including passive solar design and is essential at the planning stage to visualize the effect of the building on surrounding buildings. SunCast has also been used to study problems such as grass growth in sports stadia and right of light issues. In addition, because it is possible to remove surfaces to investigate solar penetration, SunCast can be used to investigate internal design issues from office layouts to positioning of art in museums. 1.2 Getting Help In SunCast the user can get help at any time on the current section. To do this press the F1 function key. 2 Starting SunCast 2.1 Application Bar SunCast is activated from the Solar group in the Application bar (it is currently the only application in this group). VE 2013 SunCast 3
5 2.2 Mode SunCast operates in three modes: The traditional Model view showing the Model Browser and Viewport of the model, with all the standard features of this view (see ModelIT documentation for more information) - An alternative Images tab showing image generation options and stored images, this is unique to SunCast and is explained in more detail below. VE 2013 SunCast 4
6 And an Analysis tab for visual analysis of Solar Energy and Solar Exposure on your building using the new Model Viewer II. 3 The Model View 3.1 Model Browser This has the standard Model Browser window which can be used to navigate through the model in the traditional way by selecting rooms or surfaces using the Up and Down to change the level of decomposition. VE 2013 SunCast 5
7 The two reasons to do this are to change the Status of the selected object and to browse through the Solar Shading data (see section 10.1). First selecting the room either from the browser or graphically from the Viewport. Right-click on room to bring up the pop-up menu: VE 2013 SunCast 6
8 Drag the cursor over the menu to highlight the option required. The Set Surfaces option can be used to set the status of all Floors, Walls and Ceilings in the selected zone 3.2 Room Obstruction Status Each room/zone in the model can be set to one of the following obstruction states: Opaque - this is the normal obstruction state of a room. Invisible - this obstruction state hides the room from view but still allows it to cast shadows on other objects in the model. VE 2013 SunCast 7
9 Ground Obstruction - a separate obstruction state used to represent terrain. 3.3 Surface Obstruction Status Every surface in the model can be set to one of the following obstruction states: Opaque - this is the normal obstruction state of a surface. Invisible - as with rooms when a surface is set to hidden it cannot be seen in any generated images but still casts shadows. Transparent - the surface when flagged as transparent acts in the same manner as an opening and allows all light to pass through it. Null - when the obstruction state is set to superficies ( hole ) the surface is left out of the calculations. 4 The Image View Clicking on the Images tab will bring up the images window enabling the creation and selection of the images. At the top of this tab is a toolbar (the Image toolbar) Add images to the list. Delete the selected images from the list. Delete all the images. VE 2013 SunCast 8
10 Copy the current image to the clipboard. Save the images. Print the image. Zoom all the images to the current setting. Create a movie (AVI) of the images We then have the image generation tabs, followed by the Progress Bar which is active when a series of images is being generated, followed by the list of images. The slider to the left of the list can be used to scroll through the images. The Cancel button can be used to interrupt the generation of images. The four image tabs are described in the following sections and can also be activated from the Image menu. The Create New Image(s), Delete Image(s) and Delete All Images can also be activated from the Image menu rather than the toolbar. 4.1 Copy an Image Select the image required from the image list. Click on the Copy button on the Image List toolbar. The image is now in the system clipboard and can be pasted into most applications. When pasted, details of the image taken are included, giving: view time, latitude, longitude, model bearing, and sun and eye azimuths and altitudes, as shown below VE 2013 SunCast 9
11 4.2 Save Image(s) Select the image(s) required from the image list. Click the Save icon on the image list toolbar. VE 2013 SunCast 10
12 The following dialogue window will appear: Here you can choose to save the images that have been selected in the image list. The images can have header information (as seen on printed output) by checking the box at the bottom of the window. 4.3 Zoom All Images If you have zoomed in (or out) on a particular image and want all the other images in the sequence you have created to have the same zoom settings, then click on the Apply zoom to all other images button. 4.4 Create AVI Movie Clicking on the Create video button pops-up the following window - Make the required adjustments to the parameters and click the Make the video button, this pops-up the following window - VE 2013 SunCast 11
13 Once again make the required adjustments to the parameters and click the OK button to create the AVI. 5 The Analysis View 5.1 Overview The Solar Analysis feature allows you to visually evaluate the sun intensity and exposure of your building s façade in 3D (using Model Viewer II) over a specified time period and at a more granular level of detail if required. This can be used, for example, to assess your building for potential placement of PVs; access to sun, pedestrian comfort and landscaping. Access to this feature is through the Analysis tab as seen below. There are two solar analysis options to choose from: Energy Analysis and Exposure Analysis. These are described in more detail below. VE 2013 SunCast 12
14 5.1.1 Solar Energy Analysis This calculation uses SunCast and Apache to generate hourly solar shading and external incident solar flux data which is then used to produce the energy results in kwh or kwh/m² for the specified period. Calculation (for each external surface): 1. Summate the hourly solar flux values. (W/m²) => Wh/m² 2. Convert the value to kwh/m². Wh/m² Optionally then convert the value to kwh. kwh/m² Area See section for more info Solar Exposure Analysis This calculation uses SunCast s generated hourly solar shading data to produce the exposure results in hours and percentage of available hours for the specified period. Calculation (for each external surface): 1. Summate the hourly percentage area values. (% area) => Hours 2. Optionally then convert the value to % available. (Hours Available Hours) 100 See section for more info Methodology Notes There are some general points to note when using the Solar Analysis feature. These are listed below: Results are only produced for the external surfaces of Rooms. Adjacent Buildings, Topographical Shades and Local Shades are ignored. External surfaces include: walls, roofs and windows but not floors or doors. As with normal SunCast calculations, a single design day is used for each month. This result is then used for every day of the month. Please note Apache still produces results for each and every day as normal. For each hour the sun is considered either up or down for that hour. The exact sun up/down time isn t taken into account. The SunCast surface results returned are for Percentage Area. Percentage Area = Area In Sun Total Surface Area. See section 10.1 for more details. The Apache surface results returned are for Ext surface incident solar flux. See Calculation of Incident Solar Flux for more details. The results displayed are an accumulation of the hourly results for the display period specified. As the results output from SunCast/Apache are on the hour, the accumulation of results is inclusive of the start and end time, i.e. the number of results = (end start) + 1. For example: A single day analysis between 0800 and 1800 is the accumulation of 11 results. VE 2013 SunCast 13
15 5.1.4 Other Notes When viewing results in Model Viewer II, please be aware that turning shadows on will apply lighting/shading to the model and therefore affect the false colours shown. This means you may not be able to match up the surface colours with the legend colours accurately. Energy Analysis - Model Viewer II, like SunCast, does not take into account daylight savings time (DST), so please be aware of this when viewing shadows on your model during the DST shift. Please note Apache does produce results which take into account DST. 5.2 Simulation Setup Setting up your simulation is easy and comes with a range of options as seen below. The first option lets you choose your desired simulation period. This can be a full year, a single month, a single day, or a specific date range. The next option is whether or not you want to take into account diffuse shading factors when running your simulation. The will make your Energy Analysis results more accurate; however it comes at the cost of increasing your simulation time. The Exposure Analysis is not affected by this output but the option is still there in case you want to then go on and perform Energy Analysis. The last option allows you to get a more detailed analysis and visual result by slicing up your building s façade into square metre (or feet) grid cells. Again this option comes at the cost of increasing your simulation time. Below is an example with the hi-resolution grid option turned off and on. Once results have been generated they can be saved and opened again later (see section 5.4). VE 2013 SunCast 14
16 5.3 Display Setup When you have results to work with you can then view them in Model Viewer II. There are various options to change what and how you visualize you results. The first option allows you to select what values you want to apply to your model and depends on the analysis performed, for example in kwh/m² or kwh. The second option allows to you to filter results by only applying colour to surfaces that have values above or below a certain threshold. This could possibly be used to easily identify hot or cold spots on the façade of your building. For example: The third option allows you to only apply colours to certain types of surfaces on your model. You can choose from: the entire building; walls only; roofs only; or windows only. See below: VE 2013 SunCast 15
17 The fourth option lets you choose what colour scale is applied to the model. There are 13 colour scales in the list to choose from as standard. You can add to this list by creating your own colour scales. These should be in bitmap image format (.bmp; 24bit; 512x1px), and added to the <VE> s Shared Content directory under the media/gradients folder (i.e. C:\Program Files (x86)\ies\shared Content\media\gradients ). For example: The fifth option allows you to change how each surface value is scaled in order to determine the final output colour. The two options are Relative and Absolute. The colours are calculated as follows: Relative [min..max] ( value minimum ) ( maximum minimum ) Absolute [0..max] ( value maximum ) The difference is shown below: VE 2013 SunCast 16
18 And finally the last option is the display range allowing you to change cumulative value applied to the model. The range can be anything within the simulated range. Once you have setup your display options, click Apply to bring up / update your model in the viewer. 5.4 Results Persistence As performing the Solar Analysis simulations can be time consuming you have the ability to save the results out to (a cab) file and load them back in again for future reference Load When loading in previous results for Solar Analysis you will be presented with the dialog below which gives you two options - Simple and Advanced. Simple mode: This option will list all cab files under your current project s SunCast/Analysis folder. These cab files are generated by the Solar Analysis save feature (see section for more details). Simply selected the cab file you want to load and click OK. This will load in the results and display the model contained within the cab file. Advanced mode: This option allows you to specify, separately, the Shading (.shd) and Apache (.aps) files to apply to your current model. The Shading files listed (if any) will be all the ones under the SunCast project subfolder. The Apache files listed (if any) will be all the ones under the Vista project subfolder that contain External incident solar flux data. (Please refer to the Apache Simulation > Output Options documentation for more details.) Using this option is not recommended unless you know what you re doing, and is mainly for when you haven t run Solar Analysis before but have results you could use. Once you have selected the Shading and Apache files you want to load, basic checks will be performed on the files - against the model and each other - to see if they can be used. Please note, due to the VE 2013 SunCast 17
19 simplicity of the checks, it is possible that invalid data could be applied to your model. You should always try to use the Solar Analysis save feature and load the results back in from the cab file as they re guaranteed to match the model. Once you have loaded the results, you can then go and visualize them as normal. The UI will be marked as below indicating you are using loaded results/model to avoid any confusion. Please note if you make any changes to the simulation options and hit Simulate the loaded results (and model) will be wiped and your current model will be used to perform the analysis calculations as normal. Unfortunately there is no way to make changes to the previously loaded results/model Save Once a simulation has been run you can save the analysis results for later investigation. Upon clicking the Save button you will be presented with the dialog below: This allows you to specify the name of the cab file. SunCast/Analysis subfolder of your project. The location of the cab file is fixed to the Results are saved as encrypted cab files (to protect against tampering) containing the SunCast and Apache results, as well as a copy of your model in its current state. This allows you to load the model back into the VE regardless of whether the actual model has changed since saving the results. 6 The SunCast Toolbar The main toolbar for SunCast is as follows: Load settings Save settings Select zone(s) Create script Model orientation SunPath diagram Sun up/down times VE 2013 SunCast 18
20 Sun rise/set graph Solar shading calculations Note this should not be confused with the Image toolbar (on the Image tab). These functions are now described below. 6.1 Load Settings Allows the user to load specific settings for the model. This function can also be activated from the File menu. 6.2 Save Settings This allows the user to save specific settings for the model. This function can also be activated from the File menu. 6.3 Select Zone(s) Allows the user to select zones from the Viewport this is the default condition that is active. 6.4 Image Script This is activated from the button on the toolbar. The toolbar buttons have the following functions - Add image(s) from current setting to script. Remove selected images from script. VE 2013 SunCast 19
21 Remove all images from script. Open an existing script file. Save the script. In addition to user defined scripts, SunCast comes supplied with some standard scripts which can be used with any model. The Create Images button will generate the images in the script and the Close button will exit from this option. 6.5 SunPath This function can also be activated from the Calculation menu see section 10.4 for more information. 6.6 Sun Up/Down Times This function can also be activated from the Calculation menu see section 10.2 for more information. 6.7 Sun Rise/Set Graph This function can also be activated from the Calculation menu see section 10.3 for more information. 6.8 Solar Shading Analysis This function can also be activated from the Calculation menu see section 10.1 for more information. 7 SunCast Menu This menu has the following options: VE 2013 SunCast 20
22 7.1 Load Settings This allows the user to load specific settings for the model (zone/surface visibility settings). This function can also be activated from the SunCast toolbar. 7.2 Save Settings This allows the user to save specific settings for the model (zone/surface visibility settings). This function can also be activated from the SunCast toolbar. 7.3 Load Shading Results This allows the user to load previously created shading results. The table of results is automatically displayed when the data has been read in. 7.4 Load Images Load the images selected, also activated by the icon on the Image toolbar. 7.5 Save Images Save the selected images, also activated by the icon on the Image toolbar. 7.6 Load AVI Movie This plays the selected AVI file. 8 Site Menu This menu has the following options: VE 2013 SunCast 21
23 8.1 Location Site data for the model is inherited from the <VE> and can only be changed by going back into ModelIT and running ApLocate. This data can be viewed from the Site Location menu: 8.2 Plan A plan view of the model showing the orientation can be created from the Site Plan menu - This image is added to the list of images - VE 2013 SunCast 22
24 9 Image Menu This menu has the following options - The Create New Image(s), Delete Image(s) and Delete All Images can also be activated from the Image toolbar rather than the Image menu, by using the, and buttons. The Image Creation Method pull-down menu is as follows - Clicking on these options will switch to the appropriate tab on the Image view. Click the icon to create image. 9.1 Single Image Here the user selects a single image for the given date and time from a fixed eye point defined by the Azimuth and Altitude (see section 14.2 below). VE 2013 SunCast 23
25 9.2 Timed Images Here the user can generate a series of images at a fixed time interval over the given date from a fixed eye point defined by the Azimuth and Altitude. 9.3 Fly-Round Here the user generates a series of images for a fixed date and time by rotating the model at the given step interval through 360 around the model at a set altitude. 9.4 Sun-view Images Here the user can generate a series of images at a fixed time interval over the given date from the position of the sun (calculated automatically). 10 Calculation Menu This menu has the following options - VE 2013 SunCast 24
26 The functions can also be activated from the SunCast toolbar (see section 6) Solar Shading for Apache This option is activated from the button in the toolbar or from the Calculations menu - The following window is shown - From this window the user selects the time period for the calculations, the design day and has the option to include diffuse shading factors. There are also options about backing up existing shading files. When the shading results have been calculated they are displayed in a flexgrid: VE 2013 SunCast 25
27 Initially the grid shows the "Solar Altitude" values - when the user selects a particular surface or opening, this shows the insolation data (by default showing the Area of External insolation) - If the Percentage Area option is selected the grid shows the Area of Insolation as a percentage of the surface area - The value in the bottom right corner of the grid gives the Annual Average Percentage Area. Data from previous shading files can be read in using the File Load Shading Results menu option. The area to the left of the flexgrid identifies the selected surface and gives two options for the results displayed - The toolbar options have the following functions - Copy the current image to the clipboard. Save the images Print the image. Text report of average % exposure for each surface and opening. VE 2013 SunCast 26
28 This example shows the Internal insolation - This example shows the External insolation - The display of this data can be switched from the Calculations menu Sun Up/Down Data This option is activated from the Times menu - button on the toolbar or from the Calculations Sunrise/Sunset VE 2013 SunCast 27
29 This shows for each day of the year the Sun Up time and azimuth and the Sun Down time and azimuth. The toolbar buttons have the following functions Copy the current data to the clipboard. Save the data to file. Print the data Sun Up/Down Graph This option is activated from the Times menu - button on the toolbar or from the Calculations Sunrise/Sunset VE 2013 SunCast 28
30 The toolbar buttons have the following functions - Copy the current data to the clipboard. Save the data to file. Print the data SunPath The SunPath program is run by activating the menu - button on the toolbar or from the Calculations VE 2013 SunCast 29
31 The diagram represents the sky with the apparent paths of the sun shown for one or more days. Compass directions are shown round the outside of the diagram (these give the azimuth of the sun), and each of the internal circles represents altitude. This gives a plot of the sun s course for the given days. The selected location (if any), the latitude and the longitude of the observer are also displayed at the top left. For more details on SunPath see the separate document on this program. 11 Options Menu This menu has the following options - VE 2013 SunCast 30
32 11.1 Ground Plane Settings The ground plane is a virtual surface which simulates the surface on which the model is standing and onto which shadows are cast. The height (z-value) of this can be set by the user. This option can be switched OFF, as can the display of zones below this ground level. The option "Show DXF on ground plane" will draw an attached DXF on the ground plane (see ModelIT for details on attaching DXF files). For the majority of circumstances you will not have to change this from the default value of Surface/Shading Colours This option pops-up the following window - VE 2013 SunCast 31
33 Clicking on a colour box pops-up the following window - The selected colour can be changed using the standard options Clock Position in Images The clock position can be set via the Options Clock Position in Images menu. VE 2013 SunCast 32
34 The default Top, Left option is shown below Model Obstructions Turns the display of obstructions on/off, by selecting show/hide. 12 View Menu This menu has the following options - VE 2013 SunCast 33
35 The Rotation pull-down menu is as follows - The Zoom pull-down menu is as follows - The Colour pull-down menu is as follows - VE 2013 SunCast 34
36 These functions are as described in the ModelIT documentation. 13 Help Menu The usual Windows help features are present: Contents Search Help on Help About 14 Miscellaneous 14.1 Zoom to an Area of an Image Select the required image from the list. Click the Zoom To User Window button. Now left mouse click and drag the box across the image - Release the mouse button to zoom in to the section. VE 2013 SunCast 35
37 Note that this works in the same way as zooming in/out in the Model view Definition of Azimuth and Altitude Azimuth The angle range is from 0 to 360 clockwise from North, see below. The azimuth will not make a difference to the rotation of the graphic if the Altitude is set to 90. VE 2013 SunCast 36
38 VE 2013 SunCast 37
39 Altitude The angle range is from 0 to 90 from the horizontal, see below. VE 2013 SunCast 38
Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved.
Solar: SunCast User Guide IES Virtual Environment Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or reproduced in any form without
More informationNatural Light in Design: IAP 2009
ECOTECT TUTORIAL --Si Siân Kleindienst-- 1 Getting Started 1.1 -- Entering the License The first time you start Ecotect, it will present you with this screen: You should begin by clicking on activate license
More informationLighting: FlucsDL (daylighting)
Lighting: FlucsDL (daylighting) User Guide IES Virtual Environment Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or reproduced in
More informationFlucsDL User Guide IES Virtual Environment 6.4. Lighting
FlucsDL User Guide IES Virtual Environment Lighting 1. Introduction to FlucsDL... 8 1.1. What s new in this version... 8 1.2. Calculations... 8 2. Menus... 9 2.1. File Menu... 9 2.1.1. Save Project, Save
More informationVE-Pro User Guide IES Virtual Environment 6.4
-Pro User Guide IES Virtual Environment General Contents 1 Registration... 4 1.1 Activate Software... 5 1.1.1 Receive confirmation email...5 1.1.2 Click Activate software...5 1.1.3 Read and accept license
More informationFlucsDL User Guide <VE> 6.0
INTEGRATED ENVIRONMENTAL SOLUTIONS LIMITED International Sustainability Consulting Developers of the IES BOSTON, MA GLASGOW, SCOTLAND DUBLIN, IRELAND LONDON, ENGLAND MELBOURNE, AUSTRALIA
More informationGEOCIRRUS 3D Viewer. User Manual: GEOCIRRUS 3D Viewer Document version 1.6 Page 1
GEOCIRRUS 3D Viewer Page 1 Table of Contents 3D Viewer Functionality... 3 Line of Sight (LoS)... 4 Identify... 8 Measurement... 9 3D Line Measure Tool... 10 3D Area Measure Tool... 11 Environment... 12
More informationDeft User Guide <Virtual Environment> 6.0
Deft User Guide 6.0 Page 1 of 32 Contents 1. Introduction... 3 2. Components of the Deft System... 5 2.1. ModelIT... 6 2.2. CostPlan... 8 2.3. ApacheSim... 9 2.4. Deft... 9 2.4.1.
More informationSolmetric isv iphone Application. User Manual
Solmetric isv iphone Application User Manual Version 1.0 Copyright 2010 Solmetric Corporation www.solmetric.com About Solmetric isv The Solmetric isv Sun Viewer application uses the iphone camera to provide
More informationModelIT: Model builder User Guide
ModelIT: Model builder User Guide IES Virtual Environment Copyright 2014 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or reproduced in any form
More informationFlucsPro User Guide <Virtual Environment> 5.9
FlucsPro User Guide 5.9 Page 1 of 80 Contents 1. Introduction to FlucsPro...7 1.1. Calculations... 7 2. Menus...8 2.1. File Menu... 8 2.1.1. Save... 8 2.1.2. Copy Bitmap... 8 2.1.3.
More informationRadianceIES: Radiance Images
RadianceIES: Radiance Images IES Virtual Environment Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or reproduced in any form without
More informationCalculation Methods. IES Virtual Environment 6.4 CIBSE Heat Loss & Heat Gain (ApacheCalc)
Calculation Methods IES Virtual Environment 6.4 CIBSE Heat Loss & Heat Gain (ApacheCalc) Contents Calculation Methods...1 1 Introduction...3 2 Heat Loss...4 2.1 Heat Loss Methodology... 4 3 Heat Gain...5
More informationWHAT S NEW IN DATACAD X3?... 3 Persistent Layer Manager... 3 New Arrow features... 4 Named Multi-View Windows... 5 Recent and Favorite Symbol browser
WHAT S NEW IN DATACAD X3?... 3 Persistent Layer Manager... 3 New Arrow features... 4 Named Multi-View Windows... 5 Recent and Favorite Symbol browser folders... 6 View-dependent symbol layers... 6 View-dependency
More informationIES Virtual Environment 2014 Release Notes
www.iesve.com IES Integrated Environmental Solutions Limited Developers of the IES Virtual Environment May 2014 VE 2014 VE 2014 Changes... 3 page 2 VE 2014 VE 2014 Changes General Improved generated room
More informationPWC County Mapper XM User Instruction (AS OF 12/03/2009)
PWC County Mapper XM User Instruction (AS OF 12/03/2009) MAP NAVIGATION There are several ways to navigate the map, you can use your keyboard/mouse combination, use the Navigation toolbar, use the slider
More informationEcotect is not intuitive. Finding the location of the tools and their purposes is very difficult and time consuming.
Ecotect 1. Rebuild model in Ecotect. 2. Check surface normals. 3. Assign Properties: Materials for Occupied Spaces: Concrete Floor on Slab (Lobby only) Concrete Floor Suspended Acoustic Ceiling Tile Brick
More informationTable of Contents
Table of Contents Introduction About Insight Solar Analysis Requirements Workflows Overview Annual Photovoltaic Analysis Custom Managing Results Analysis Display Settings Customizing Analysis Visual Styles
More informationGetting Started. Moving Around in 3D
Getting Started 1 Double-click the SketchUp icon or click: Start All Programs SketchUp 2018 SketchUp 2018 The start screen should look something like this: This person is about 5 5 tall this sets the scale
More informationGetting Started. Double-click the SketchUp icon or click: Start All Programs SketchUp 2018 SketchUp 2018
Getting Started 1 Double-click the SketchUp icon or click: Start All Programs SketchUp 2018 SketchUp 2018 The start screen should look something like this: This person is about 5 5 tall this sets the scale
More informationPowerPoint 2016 Building a Presentation
PowerPoint 2016 Building a Presentation What is PowerPoint? PowerPoint is presentation software that helps users quickly and efficiently create dynamic, professional-looking presentations through the use
More informationNavigating the ArcGIS Application Welcome to WebMap HELP
Welcome to WebMap HELP Scroll or click on links below to access more information Table of Contents Basic Navigation Bar Zoom In/Out Search Bar Home Button Legend Layer List Basemap Gallery Draw Measurement
More information3ds Max Cottage Step 1. Always start out by setting up units: We re going with this setup as we will round everything off to one inch.
3ds Max Cottage Step 1 Always start out by setting up units: We re going with this setup as we will round everything off to one inch. File/Import the CAD drawing Be sure Files of Type is set to all formats
More informationIESVE Plug-in for Trimble SketchUp Version 3 User Guide
IES Virtual Environment Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or reproduced in any form without the express agreement of
More informationFACULTY AND STAFF COMPUTER FOOTHILL-DE ANZA. Office Graphics
FACULTY AND STAFF COMPUTER TRAINING @ FOOTHILL-DE ANZA Office 2001 Graphics Microsoft Clip Art Introduction Office 2001 wants to be the application that does everything, including Windows! When it comes
More informationFlucsPro: Artificial Lighting and Daylighting
FlucsPro: Artificial Lighting and Daylighting User Guide IES Virtual Environment Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or
More information13/02/2008. Users guide RoofCon Viewer
Users guide RoofCon Viewer Table of contents Users guide RoofCon Viewer... 1 Table of contents... 2 Installation... 3 Select object... 3 Zoom... 3 Measure distance... 3 Toolbar and Drawing preferences...
More informationekaizen Lessons Table of Contents 1. ebook Basics 1 2. Create a new ebook Make Changes to the ebook Populate the ebook 41
Table of Contents 1. ebook Basics 1 2. Create a new ebook 20 3. Make Changes to the ebook 31 4. Populate the ebook 41 5. Share the ebook 63 ekaizen 1 2 1 1 3 4 2 2 5 The ebook is a tabbed electronic book
More informationBASICS OF MOTIONSTUDIO
EXPERIMENT NO: 1 BASICS OF MOTIONSTUDIO User Interface MotionStudio combines draw, paint and animation in one easy easy-to-use program gram to save time and make work easy. Main Window Main Window is the
More informationGDL Toolbox 2 Reference Manual
Reference Manual Archi-data Ltd. Copyright 2002. New Features Reference Manual New Save GDL command Selected GDL Toolbox elements can be exported into simple GDL scripts. During the export process, the
More informationComponents User Guide Component Modeller
Components User Guide Component Modeller IES Virtual Environment Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or reproduced in any
More informationCopyright 2015 Integrated Environmental Solutions Limited. All rights reserved.
Tabular Room Data User Guide IES Virtual Environment Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or reproduced in any form without
More informationAutodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
More informationLighting Techniques 1
STEP 1: open your Class-05 Max fi le _ main menu / Customize / Units Setup _ set Display Unit Scale as shown in Image 1 _ set Lighting Units to: American STEP 2: select Daylight.01 _ command panel / modify
More informationCS Multimedia and Communications REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! Lab 02: Introduction to Photoshop Part 1
CS 1033 Multimedia and Communications REMEMBER TO BRING YOUR MEMORY STICK TO EVERY LAB! Lab 02: Introduction to Photoshop Part 1 Upon completion of this lab, you should be able to: Open, create new, save
More informationThe principles of CCTV design in VideoCAD
The principles of CCTV design in VideoCAD By Stanislav Utochkin, cctvcad.com CCTV focus readers have already had an opportunity to read about VideoCAD in the past issues. This is the only specialised program
More informationThe American University in Cairo. Academic Computing Services. Word prepared by. Soumaia Ahmed Al Ayyat
The American University in Cairo Academic Computing Services Word 2000 prepared by Soumaia Ahmed Al Ayyat Spring 2001 Table of Contents: Opening the Word Program Creating, Opening, and Saving Documents
More informationModelIT User Guide <Virtual Environment> 6.0
ModelIT User Guide 6.0 Page 1 of 91 Contents ModelIT User Guide...1 6.0...1 1. Introduction...6 1.1. What is ModelIT?...6 1.2. Using This Guide...6 2. Fundamentals...7
More informationWord 3 Microsoft Word 2013
Word 3 Microsoft Word 2013 Mercer County Library System Brian M. Hughes, County Executive Action Technique 1. Insert a Text Box 1. Click the Insert tab on the Ribbon. 2. Then click on Text Box in the Text
More informationATNS. USING Google EARTH. Version 1
ATNS USING Google EARTH Version 1 ATNS/HO/Using Google Earth Page 1 25/04/2013 CONTENTS 1. BASIC SETUP 2. NAVIGATING IN GOOGLE EARTH 3. ADDING OBJECTS TO GOOGLE EARTH 4. USER HELP REFERENCES ATNS/HO/Using
More informationIES <Virtual Environment> Tutorial RadianceIES (Version 6.0)
IES Tutorial RadianceIES (Version 6.0) Introduction In this tutorial you will use RadianceIES, IES s 3D lighting simulation tool, to perform luminance and illuminance lighting simulations.
More informationTabular Building Template Manager (BTM)
Tabular Building Template Manager (BTM) User Guide IES Vi rtual Environment Copyright 2015 Integrated Environmental Solutions Limited. All rights reserved. No part of the manual is to be copied or reproduced
More informationRoof Designer USER S GUIDE
Roof Designer USER S GUIDE Roof Designer-1 Roof Designer-2 Roof Designer The Roof Designer makes it easy to define and place custom roofs in your project. You can start the Roof Designer independently,
More informationVersion 10 Addendum to the User s Manual
Version 10 Addendum to the User s Manual Introduction to Version 10 This latest release of the diagram program boasts improved productivity via the new user interface, real-time 3D, a new 3D rendering
More informationNetscape Composer: Working with Tables
Why tables? Netscape Composer: Working with Tables Tables on the Web can be divided into two categories: data display and page layout. Although the method for making both kinds of tables is the same, it
More informationPlacing Spaces. Let Me Try! Before you begin. The following files are needed for this Let Me Try exercise: M_c04_archi_spaces_rmp2015.
Placing Spaces Before you begin The following files are needed for this Let Me Try exercise: For Imperial: For Metric: c04_archi_spaces_2016.rvt M_c04_archi_spaces_rmp2015.rvt To access the files from
More informationIES <Virtual Environment> Live e-training. Trainee notes. <VE Compliance> UK Dwellings. Version 6.0
IES Live e-training Trainee notes UK Dwellings Version 6.0 Introduction These training notes are to be used in conjunction with your UK Dwellings training. In this
More informationSession 7 MS Word. Graphics. Inserting Clipart, and Graphics Modify graphics Position graphics
Session 7 MS Word Graphics Inserting Clipart, and Graphics Modify graphics Position graphics Table of Contents Session 7 Working with Graphics... 1 The Toolbar... 1 Drawing Toolbar... 1 Picture Toolbar...
More informationA Basic Guide to Modeling Landscapes in Google SketchUp
DYNASCAPE SOFTWARE INC. A Basic Guide to Modeling Landscapes in Google SketchUp A DS Sketch 3D User Guide Volume 2 This guide will take you through the steps of creating a 3D model of a landscape in Google
More informationPASS Sample Size Software
Chapter 941 Introduction In PASS, it is easy to study power and sample size calculations for a range of possible parameter values. When at least 2 input parameters vary, you can create stunning 3D power
More informationMicrosoft Office Excel
Microsoft Office 2007 - Excel Help Click on the Microsoft Office Excel Help button in the top right corner. Type the desired word in the search box and then press the Enter key. Choose the desired topic
More informationSAS Visual Analytics 8.2: Working with Report Content
SAS Visual Analytics 8.2: Working with Report Content About Objects After selecting your data source and data items, add one or more objects to display the results. SAS Visual Analytics provides objects
More informationSolarSpeed Calculator INSTRUCTION MANUAL
SolarSpeed Calculator INSTRUCTION MANUAL Login or register at https://solarspeed.avasco.be Registering Calculator. Click on Register at the homepage https://solarspeed.avasco.be. Fill in all fields (*
More informationFig. A. Fig. B. Fig. 1. Fig. 2. Fig. 3 Fig. 4
Create A Spinning Logo Tutorial. Bob Taylor 2009 To do this you will need two programs from Xara: Xara Xtreme (or Xtreme Pro) and Xara 3D They are available from: http://www.xara.com. Xtreme is available
More informationKODAK Software User s Guide. Software Version 9.0
KODAK Create@Home Software User s Guide Software Version 9.0 Table of Contents 1 Welcome to KODAK Create@Home Software Features... 1-1 Supported File Formats... 1-1 System Requirements... 1-1 Software
More informationIADS Terrain Installation User Guide. January 2013 SYMVIONICS Document SSD-IADS SYMVIONICS, Inc. All rights reserved.
IADS Terrain Installation User Guide January 2013 SYMVIONICS Document SSD-IADS-148 1996-2018 SYMVIONICS, Inc. All rights reserved. Created: June 7, 2011 Table of Contents 1. Installing the IADS Situational
More informationSILVACO. An Intuitive Front-End to Effective and Efficient Schematic Capture Design INSIDE. Introduction. Concepts of Scholar Schematic Capture
TCAD Driven CAD A Journal for CAD/CAE Engineers Introduction In our previous publication ("Scholar: An Enhanced Multi-Platform Schematic Capture", Simulation Standard, Vol.10, Number 9, September 1999)
More informationCentral Management Software. Cam Viewer 3 Lite. User Manual
Central Management Software Cam Viewer 3 Lite User Manual Version 1.0.0 Table of Contents 1. System Requirement...4 2. Software Installation...5 3. Configuration Wizard...9 3.1 Channel...10 3.1.1 Adding
More informationSystems Space Reservation
Systems Space Reservation Preface Using This Guide What's New? Getting Started Enter the Workbench Create an Equipment Reservation Set Correct Working Units and Grid Changing the Current Axis Saving Documents
More informationPlotting: Customizing the Page Display
Plotting: Customizing the Page Display Setting the Page Orientation Graphs can be viewed in landscape or portrait page orientation. To change the page orientation of the active graph window, select File:Page
More informationMetes and Bounds Help
Metes and Bounds Help Topics: Drawing Wizard Data Entry o Entering Metes and Bounds Data o Entering Section Call Data Layers o Layer Options o Analyze Layer Closing Error Tabs Drawing Options o Drawing
More informationCreating a Text Frame. Create a Table and Type Text. Pointer Tool Text Tool Table Tool Word Art Tool
Pointer Tool Text Tool Table Tool Word Art Tool Picture Tool Clipart Tool Creating a Text Frame Select the Text Tool with the Pointer Tool. Position the mouse pointer where you want one corner of the text
More informationUSB Instruments EasyLogger for PS40M10 "Swordfish" Help
USB Instruments EasyLogger for PS40M10 "Swordfish" Help I EasyLogger for PS40M10 Help Table of Contents Part I Introduction 3 1 Welcome to... EasyLogger for PS40M10 3 2 EasyLogger... Features 4 Part II
More informationUnit 21 - Creating a Navigation Bar in Macromedia Fireworks
Unit 21 - Creating a Navigation Bar in Macromedia Fireworks Items needed to complete the Navigation Bar: Unit 21 - House Style Unit 21 - Graphics Sketch Diagrams Document ------------------------------------------------------------------------------------------------
More informationTutorial: Overview. CHAPTER 2 Tutorial
2 CHAPTER 2 Tutorial... Tutorial: Overview This tutorial steps you through the creation of a simple banner for a web page and shows how to actually put the movie on the web. The tutorial explains how to
More informationGuide to Mapping Website (Public) December 2016 GC_236594
Guide to Mapping Website (Public) December 2016 GC_236594 Table of Contents Guide to Mapping Website (Public)... 1 December 2016... 1 Quick Start... 3 Map Layers... 4 How do I?... 5 Draw on the Map...
More informationVersion 14 COURSE UNIT 6. Visualisation
Version 14 COURSE UNIT 6 Visualisation Table of Contents Introduction... 2 Preparation... 3 Materialization... 4 View position... 9 Camera... 10 Create design model view.... 12 Move background image...
More informationMacroFlo User Guide <Virtual Environment> 6.0
MacroFlo User Guide 6.0 Page 1 of 12 Contents 1. Introduction...3 1.1. What is the MacroFlo View?...3 1.2. Overview of MacroFlo View Interface Features...3 1.2.1. Virtual Environment
More informationInsight: Measurement Tool. User Guide
OMERO Beta v2.2: Measurement Tool User Guide - 1 - October 2007 Insight: Measurement Tool User Guide Open Microscopy Environment: http://www.openmicroscopy.org OMERO Beta v2.2: Measurement Tool User Guide
More informationDaylighting. Note: Daylight is typically defined as diffuse light and is very different from sunlight (direct solar radiation).
systems can significantly reduce both lighting consumption and cooling-energy consumption by reducing the electric-lighting heat gain in the building. However, daylighting can also cause increased heating-energy
More informationC omputer D riving L icence
E uropean C omputer D riving L icence E C D L S y l l a b u s 5. 0 Module 6 Presentation ECDL Syllabus 5 Courseware Module 6 Contents USING THE APPLICATION... 1 OPENING & CLOSING MS POWERPOINT & PRESENTATIONS...
More informationOrtelia Space Builder User Manual
Ortelia Space Builder User Manual http://ortelia.com 1 Table of Contents Introducing Ortelia Space Builder...2 System Requirements...3 1. Operating system:... 3 2. Hardware:... 3 Minimum Graphics card
More informationTable of Contents Introduction... 1 Tutorial... 2
AppNote MG589468 A P P N O T E S SM FloTHERM V10.1 Upgrade Tutorial By: Akbar Sahrapour, Mechanical Division Analysis Last Modified: February 10, 2015 Table of Contents Introduction... 1 Tutorial... 2
More informationECDL Module 6 REFERENCE MANUAL
ECDL Module 6 REFERENCE MANUAL Presentation Microsoft PowerPoint XP Edition for ECDL Syllabus Four PAGE 2 - ECDL MODULE 6 (USING POWERPOINT XP) - MANUAL 6.1 GETTING STARTED... 4 6.1.1 FIRST STEPS WITH
More information3D Surface Plots with Groups
Chapter 942 3D Surface Plots with Groups Introduction In PASS, it is easy to study power and sample size calculations for a range of possible parameter values. When at least 3 input parameters vary, you
More informationUsing Google SketchUp
Using Google SketchUp Mike Bailey mjb@cs.oregonstate.edu http://cs.oregonstate.edu/~mjb/sketchup What is Google SketchUp? Google SketchUp is a program which lets you sketch in 3D. It is excellent for creating
More information40. Sim Module - Common Tools
HSC Sim Common Tools 15021-ORC-J 1 (33) 40. Sim Module - Common Tools Table of Contents 40.1. Drawing flowsheets and adding tables to flowsheets... 2 40.1.1. Drawing units... 2 40.1.2. Drawing streams...
More informationSAPPHIRE Viewer: The Collaboration Tool
SAPPHIRE Viewer: The Collaboration Tool MiTek SAPPHIRE Viewer is a scaled down version of SAPPHIRE Structure that allows users to open, view, comment on, and print Structure files. This free application
More informationTo learn more about the Milestones window choose: Help Help Topics Select the Index tab and type in the feature. For Example toolbox.
To learn more about the Milestones window choose: Help Help Topics Select the Index tab and type in the feature. For Example toolbox. 1 of 12 CHOOSE THE DATES TAB TO: 1. Set the schedule s Date Range.
More informationGoLive will first ask you if your new site will be for one individual or a work group; select for a Single User, and click Next.
Getting Started From the Start menu, located the Adobe folder which should contain the Adobe GoLive 6.0 folder. Inside this folder, click Adobe GoLive 6.0. GoLive will open to its initial project selection
More informationIntermediate/Advanced. Faculty Development Workshop FSE Faculty retreat April 18, 2012
Intermediate/Advanced Faculty Development Workshop FSE Faculty retreat April 18, 2012 Remote Desktop Sharing Quick Reference Guide for Moderators The Moderator or a Participant may request control of another
More informationOnline Plan Room Viewer View Mode Quick Start Supplementt Version 10.7
Online Plan Room Viewer View Mode Quick Start Supplement Version 10.7 Introduction 1 This guide is intended to cover the basic tools available for viewing and estimating project documents using On-Screen
More informationUsing Google Earth. Middlebury College Library and Information Services
Using Google Earth Middlebury College Introduction: While Google Earth can be a fun tool for simply looking at the surface of the earth, there are many other more sophisticated features to explore. Google
More informationWorking with Charts Stratum.Viewer 6
Working with Charts Stratum.Viewer 6 Getting Started Tasks Additional Information Access to Charts Introduction to Charts Overview of Chart Types Quick Start - Adding a Chart to a View Create a Chart with
More informationMirasys NVR. User s Guide
Mirasys NVR User s Guide CONTENTS Contents... 2 Before you start... 3 Introduction... 6 Logging in... 9 User interface... 13 Navigator... 16 Cameras... 25 Video outputs... 41 Digital outputs... 46 Digital
More informationOverview Create Pages consists of a Menu line, two sets of toolbars and a window that represents the page you are creating.
Create Pages Overview Create Pages consists of a Menu line, two sets of toolbars and a window that represents the page you are creating. Menu Line The functions from the Menu Line can also be done through
More informationDesigner Reference 1
Designer Reference 1 Table of Contents USE OF THE DESIGNER...4 KEYBOARD SHORTCUTS...5 Shortcuts...5 Keyboard Hints...5 MENUS...7 File Menu...7 Edit Menu...8 Favorites Menu...9 Document Menu...10 Item Menu...12
More informationSending image(s) to report Click Send Snapshot on any screen in Dolphin3D and choose the Send to Report option
Dolphin 3D Reports Sending image(s) to report Click Send Snapshot on any screen in Dolphin3D and choose the Send to Report option Creating a report step by step 1. Generate the desired images in Dolphin3D
More informationL E S S O N 2 Background
Flight, Naperville Central High School, Naperville, Ill. No hard hat needed in the InDesign work area Once you learn the concepts of good page design, and you learn how to use InDesign, you are limited
More informationSketchUp Starting Up The first thing you must do is select a template.
SketchUp Starting Up The first thing you must do is select a template. While there are many different ones to choose from the only real difference in them is that some have a coloured floor and a horizon
More informationIntegrated Environmental Solutions Virtual Environment Release Notes
Integrated Environmental Solutions Virtual Environment 2017 Release Notes February 2017 Contents VE 2017 Changes... 0 Apache... 0 ApacheHVAC... 0 ApacheLoads... 1 ApacheSim... 1 ApLocate... 1 Apache View...
More informationSelect the options to assess for this credit. Only one option can be selected if the rating system is set to Healthcare.
Surrounding Density and Diverse Uses LT Surrounding Density and Diverse Uses Select options to assess: Select the options to assess for this credit. Only one option can be selected if the rating system
More informationMicrosoft Excel 2010 Part 2: Intermediate Excel
CALIFORNIA STATE UNIVERSITY, LOS ANGELES INFORMATION TECHNOLOGY SERVICES Microsoft Excel 2010 Part 2: Intermediate Excel Spring 2014, Version 1.0 Table of Contents Introduction...3 Working with Rows and
More informationFactoryLink 7. Version 7.0. Client Builder Reference Manual
FactoryLink 7 Version 7.0 Client Builder Reference Manual Copyright 2000 United States Data Corporation. All rights reserved. NOTICE: The information contained in this document (and other media provided
More informationLucas County Engineer s GIS Maps User Guide
Lucas County Engineer s GIS Maps User Guide The Web Map Interface On the left hand side of the screen, you will see the Legend of the layers shown in the map. If you click on Details, you will see just
More informationThe JSON Data Schema That Encodes Energy3D Design Processes
The JSON Data Schema That Encodes Energy3D Design Processes (Updated on 9/15/2016, subject to change in the future) This specification defines the JSON data schema for the process data stream logged by
More informationArcView QuickStart Guide. Contents. The ArcView Screen. Elements of an ArcView Project. Creating an ArcView Project. Adding Themes to Views
ArcView QuickStart Guide Page 1 ArcView QuickStart Guide Contents The ArcView Screen Elements of an ArcView Project Creating an ArcView Project Adding Themes to Views Zoom and Pan Tools Querying Themes
More informationAutodesk Fusion 360 Training: The Future of Making Things Attendee Guide
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to
More informationUsing Google SketchUp
Using Google SketchUp Mike Bailey mjb@cs.oregonstate.edu http://cs.oregonstate.edu/~mjb/sketchup What is Google SketchUp? Google SketchUp is a program which lets you sketch in 3D. It is excellent for creating
More informationKODAK Software User s Guide
KODAK Create@Home Software User s Guide Table of Contents 1 Welcome to KODAK Create@Home Software Features... 1-1 Supported File Formats... 1-1 System Requirements... 1-1 Software Updates...1-2 Automatic
More information