# Expressions and Assignment Statements

Size: px
Start display at page:

## Transcription

1 Expressions and Assignment Statements

2 Introduction Expressions are the fundamental means of specifying computations in a programming language To understand expression evaluation, need to be familiar with the orders of operator and operand evaluation Essence of imperative languages is dominant role of assignment statements Copyright 2009 Addison-Wesley. All rights reserved.

3 Arithmetic Expressions Arithmetic evaluation was one of the motivations for the development of the first programming languages Arithmetic expressions consist of operators, operands, parentheses, and function calls Copyright 2009 Addison-Wesley. All rights reserved. 1-3

5 Arithmetic Expressions: Operators A unary operator has one operand A binary operator has two operands A ternary operator has three operands Copyright 2009 Addison-Wesley. All rights reserved. 1-5

6 Arithmetic Expressions: Operator Precedence Rules The operator precedence rules for expression evaluation define the order in which adjacent operators of different precedence levels are evaluated Typical precedence levels parentheses unary operators ** (if the language supports it) *, / +, - Copyright 2009 Addison-Wesley. All rights reserved. 1-6

7 Arithmetic Expressions: Operator Associativity Rule The operator associativity rules for expression evaluation define the order in which adjacent operators with the same precedence level are evaluated Typical associativity rules Left to right, except **, which is right to left Sometimes unary operators associate right to left (e.g., in FORTRAN) APL is different; all operators have equal precedence and all operators associate right to left Precedence and associativity rules can be overriden with parentheses Copyright 2009 Addison-Wesley. All rights reserved. 1-7

8 Associativity Examples Fortran Left: *, /, +, - Right: ** c-based Left: *, /, %, binary +, binary - Right: ++, --, unary -, unary + Ada Left: all except ** Nonassociative: ** APL Right: all

9 Ruby Expressions All arithmetic, relational, and assignment operators, as well as array indexing, shifts, and bit-wise logic operators, are implemented as methods One result of this is that these operators can all be overriden by application programs Copyright 2009 Addison-Wesley. All rights reserved. 1-9

10 Arithmetic Expressions: Conditional Expressions Conditional Expressions C-based languages (e.g., C, C++) An example: average = (count == 0)? 0 : sum / count Evaluates as if written like if (count == 0) average = 0 else average = sum /count Copyright 2009 Addison-Wesley. All rights reserved. 1-10

11 Arithmetic Expressions: Operand Evaluation Order Operand evaluation order 1. Variables: fetch the value from memory 2. Constants: sometimes a fetch from memory; sometimes the constant is in the machine language instruction 3. Parenthesized expressions: evaluate all operands and operators first 4. The most interesting case is when an operand is a function call Copyright 2009 Addison-Wesley. All rights reserved. 1-11

12 Arithmetic Expressions: Operand Evaluation Order Operand evaluation order Variables: fetch the value from memory Constants: sometimes a fetch from memory; sometimes the constant is in the machine language instruction Parenthesized expressions: evaluate all operands and operators first The most interesting case is when an operand is a function call

13 Arithmetic Expressions: Potentials for Side Effects Functional side effects: when a function changes a two-way parameter or a non-local variable Problem with functional side effects: When a function referenced in an expression alters another operand of the expression; e.g., for a parameter change: a = 10; /* assume that fun changes its parameter */ b = a + fun(&a); Copyright 2009 Addison-Wesley. All rights reserved. 1-13

14 Functional Side Effects Two possible solutions to the problem Write the language definition to disallow functional side effects No two-way parameters in functions No non-local references in functions Advantage: it works! Used by Ada Disadvantage: inflexibility of one-way parameters and lack of non-local references Write the language definition to demand that operand evaluation order be fixed Disadvantage: limits some compiler optimizations Java requires that operands appear to be evaluated in left-to-right order

15 Overloaded Operators Use of an operator for more than one purpose is called operator overloading Some are common (e.g., + for int and float) Some are potential trouble (e.g., * in C and C++) Loss of compiler error detection (omission of an operand should be a detectable error) Some loss of readability Copyright 2009 Addison-Wesley. All rights reserved. 1-15

17 Type Conversions A narrowing conversion is one that converts an object to a type that cannot include all of the values of the original type e.g., float to int A widening conversion is one in which an object is converted to a type that can include at least approximations to all of the values of the original type e.g., int to float Copyright 2009 Addison-Wesley. All rights reserved. 1-17

18 Type Conversions: Mixed Mode A mixed-mode expression is one that has operands of different types A coercion is an implicit type conversion Disadvantage of coercions: They decrease in the type error detection ability of the compiler In most languages, all numeric types are coerced in expressions, using widening conversions In Ada, there are virtually no coercions in expressions Copyright 2009 Addison-Wesley. All rights reserved. 1-18

20 Type Conversions: Errors in Expressions Causes Inherent limitations of arithmetic e.g., division by zero Limitations of computer arithmetic e.g. overflow Often ignored by the run-time system Copyright 2009 Addison-Wesley. All rights reserved. 1-20

21 Relational and Boolean Expressions Relational Expressions Use relational operators and operands of various types Evaluate to some Boolean representation Operator symbols used vary somewhat among languages (!=, /=, ~=,.NE., <>, #) JavaScript and PHP have two additional relational operator, === and!== Similar to their cousins, == and!=, except that they do not coerce their operands Copyright 2009 Addison-Wesley. All rights reserved. 1-21

22 Relational and Boolean Expressions Boolean Expressions Operands are Boolean and the result is Boolean Example operators FORTRAN 77 FORTRAN 90 C Ada.AND. and && and.or. or or.not. not! not xor Copyright 2009 Addison-Wesley. All rights reserved. 1-22

23 Relational and Boolean Expressions: No Boolean Type in C C89 has no Boolean type--it uses int type with 0 for false and nonzero for true One odd characteristic of C s expressions: a < b < c is a legal expression, but the result is not what you might expect: Left operator is evaluated, producing 0 or 1 The evaluation result is then compared with the third operand (i.e., c) Copyright 2009 Addison-Wesley. All rights reserved. 1-23

24 Relational and Boolean Expressions Precedence of all Ada operators: **, abs, not *, /, mod, rem unary -, + binary +, -, & relops, in, not in and, or, xor, and then, or else C, C++, and Java have over 40 operators and at least 15 different levels of precedence

25 Short Circuit Evaluation An expression in which the result is determined without evaluating all of the operands and/or operators Example: (13*a) * (b/13 1) If a is zero, there is no need to evaluate (b/13-1) Problem with non-short-circuit evaluation index = 1; while (index <= length) && (LIST[index]!= value) index++; When index=length, LIST [index] will cause an indexing problem (assuming LIST has length -1 elements) Copyright 2009 Addison-Wesley. All rights reserved. 1-25

26 Short Circuit Evaluation C, C++, and Java: use short-circuit evaluation for the usual Boolean operators (&& and ), but also provide bitwise Boolean operators that are not short circuit (& and ) Ada: programmer can specify either (shortcircuit is specified with and then and or else) Short-circuit evaluation exposes the potential problem of side effects in expressions e.g. (a > b) (b++ / 3) Copyright 2009 Addison-Wesley. All rights reserved. 1-26

27 Assignment Statements The general syntax <target_var> <assign_operator> <expression> The assignment operator = FORTRAN, BASIC, the C-based languages := ALGOLs, Pascal, Ada = can be bad when it is overloaded for the relational operator for equality (that s why the C-based languages use == as the relational operator) Copyright 2009 Addison-Wesley. All rights reserved. 1-27

28 Assignment Statements: Conditional Targets Conditional targets (Perl) (\$flag? \$total : \$subtotal) = 0 Which is equivalent to if (\$flag){ \$total = 0 } else { \$subtotal = 0 } Copyright 2009 Addison-Wesley. All rights reserved. 1-28

29 Assignment Statements: Compound Operators A shorthand method of specifying a commonly needed form of assignment Introduced in ALGOL; adopted by C Example: a = a + b is written as a += b Copyright 2009 Addison-Wesley. All rights reserved. 1-29

30 Assignment Statements: Unary Assignment Operators Unary assignment operators in C-based languages combine increment and decrement operations with assignment Examples sum = ++count (count incremented, added to sum) sum = count++ (count incremented, added to sum) count++ (count incremented) Copyright 2009 Addison-Wesley. All rights reserved count++ (count incremented then negated)

31 Assignment as an Expression In C, C++, and Java, the assignment statement produces a result and can be used as operands An example: while ((ch = getchar())!= EOF){ } ch = getchar() is carried out; the result (assigned to ch) is used as a conditional value for the while statement Copyright 2009 Addison-Wesley. All rights reserved. 1-31

33 Mixed-Mode Assignment Assignment statements can also be mixed-mode In Fortran, C, and C++, any numeric type value can be assigned to any numeric type variable In Java, only widening assignment coercions are done In Ada, there is no assignment coercion Copyright 2009 Addison-Wesley. All rights reserved. 1-33

### Chapter 7. Expressions and Assignment Statements

Chapter 7 Expressions and Assignment Statements Chapter 7 Topics Introduction Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean Expressions Short-Circuit Evaluation Assignment

### Chapter 7. Expressions and Assignment Statements ISBN

Chapter 7 Expressions and Assignment Statements ISBN 0-321-33025-0 Chapter 7 Topics Introduction Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean Expressions Short-Circuit

### Chapter 7. Expressions and Assignment Statements (updated edition 11) ISBN

Chapter 7 Expressions and Assignment Statements (updated edition 11) ISBN 0-321-49362-1 Chapter 7 Topics Introduction Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean

### Expressions & Assignment Statements

Expressions & Assignment Statements 1 Topics Introduction Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean Expressions Short-Circuit Evaluation Assignment Statements

### Chapter 7. Expressions and Assignment Statements

Chapter 7 Expressions and Assignment Statements Chapter 7 Topics Introduction Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean Expressions Short-Circuit Evaluation Assignment

### Chapter 7. Expressions and Assignment Statements ISBN

Chapter 7 Expressions and Assignment Statements ISBN 0-321-49362-1 Chapter 7 Topics Introduction Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean Expressions Short-Circuit

### Software II: Principles of Programming Languages. Why Expressions?

Software II: Principles of Programming Languages Lecture 7 Expressions and Assignment Statements Why Expressions? Expressions are the fundamental means of specifying computations in a programming language

### Chapter 7 Expressions and Assignment statements

Chapter 7 Expressions and Assignment statements 1 7.1 Introduction Expressions are the fundamental means of specifying computations in a programming language Semantics of expressions are discussed in this

### Concepts of Programming Languages

Concepts of Programming Languages COMP322 Fall 2012/2013 1-1 Textbook ISBN 0-321-49362-1 Chapter 1 Preliminaries ISBN 0-321-49362-1 Chapter 1 Topics Reasons for Studying Concepts of Programming Languages

### Relational Expressions. Boolean Expressions. Boolean Expressions. ICOM 4036 Programming Languages. Boolean Expressions

ICOM 4036 Programming Languages Ch7. Expressions & Assignment Statements Arithmetic Expressions Overloaded Operators Type Conversions Relational and Boolean Expressions Short-Circuit Evaluation Assignment

### CSE 452: Programming Languages. Outline of Today s Lecture. Expressions. Expressions and Control Flow

CSE 452: Programming Languages Expressions and Control Flow Outline of Today s Lecture Expressions and Assignment Statements Arithmetic Expressions Overloaded Operators Type Conversions Relational and

### Expressions and Assignment

Expressions and Assignment COS 301: Programming Languages Outline Other assignment mechanisms Introduction Expressions: fundamental means of specifying computations Imperative languages: usually RHS of

### Chapter7 Expression and Assignment Statement. Introduction

Chapter7 Expression and Assignment Statement Arithmetic Expressions Overloaded Operators Boolean Expressions Short-Circuit Evaluation Assignment Statements Mixed-Mode Assignment Introduction Fundamental

### 9/21/17. Outline. Expression Evaluation and Control Flow. Arithmetic Expressions. Operators. Operators. Notation & Placement

Outline Expression Evaluation and Control Flow In Text: Chapter 6 Notation Operator evaluation order Operand evaluation order Overloaded operators Type conversions Short-circuit evaluation of conditions

### Expression Evaluation and Control Flow. Outline

Expression Evaluation and Control Flow In Text: Chapter 6 Outline Notation Operator Evaluation Order Operand Evaluation Order Overloaded operators Type conversions Short-circuit evaluation of conditions

### Operators. Java operators are classified into three categories:

Operators Operators are symbols that perform arithmetic and logical operations on operands and provide a meaningful result. Operands are data values (variables or constants) which are involved in operations.

### Basic operators, Arithmetic, Relational, Bitwise, Logical, Assignment, Conditional operators. JAVA Standard Edition

Basic operators, Arithmetic, Relational, Bitwise, Logical, Assignment, Conditional operators JAVA Standard Edition Java - Basic Operators Java provides a rich set of operators to manipulate variables.

### Module 2 - Part 2 DATA TYPES AND EXPRESSIONS 1/15/19 CSE 1321 MODULE 2 1

Module 2 - Part 2 DATA TYPES AND EXPRESSIONS 1/15/19 CSE 1321 MODULE 2 1 Topics 1. Expressions 2. Operator precedence 3. Shorthand operators 4. Data/Type Conversion 1/15/19 CSE 1321 MODULE 2 2 Expressions

### Introduction. Following are the types of operators: Unary requires a single operand Binary requires two operands Ternary requires three operands

Introduction Operators are the symbols which operates on value or a variable. It tells the compiler to perform certain mathematical or logical manipulations. Can be of following categories: Unary requires

### Information Science 1

Information Science 1 Simple Calcula,ons Week 09 College of Information Science and Engineering Ritsumeikan University Topics covered l Terms and concepts from Week 8 l Simple calculations Documenting

### C expressions. (Reek, Ch. 5) 1 CS 3090: Safety Critical Programming in C

C expressions (Reek, Ch. 5) 1 Shift operations Left shift: value > n Two definitions: logical version: discard the n

### More Programming Constructs -- Introduction

More Programming Constructs -- Introduction We can now examine some additional programming concepts and constructs Chapter 5 focuses on: internal data representation conversions between one data type and

### Prof. Navrati Saxena TA: Rochak Sachan

JAVA Prof. Navrati Saxena TA: Rochak Sachan Operators Operator Arithmetic Relational Logical Bitwise 1. Arithmetic Operators are used in mathematical expressions. S.N. 0 Operator Result 1. + Addition 6.

### Chapter 3: Operators, Expressions and Type Conversion

101 Chapter 3 Operators, Expressions and Type Conversion Chapter 3: Operators, Expressions and Type Conversion Objectives To use basic arithmetic operators. To use increment and decrement operators. To

CS313D: ADVANCED PROGRAMMING LANGUAGE Computer Science department Lecture 2 : C# Language Basics Lecture Contents 2 The C# language First program Variables and constants Input/output Expressions and casting

### UNIT- 3 Introduction to C++

UNIT- 3 Introduction to C++ C++ Character Sets: Letters A-Z, a-z Digits 0-9 Special Symbols Space + - * / ^ \ ( ) [ ] =!= . \$, ; : %! &? _ # = @ White Spaces Blank spaces, horizontal tab, carriage

### Operators & Expressions

Operators & Expressions Operator An operator is a symbol used to indicate a specific operation on variables in a program. Example : symbol + is an add operator that adds two data items called operands.

### Operators and Expressions

Operators and Expressions Conversions. Widening and Narrowing Primitive Conversions Widening and Narrowing Reference Conversions Conversions up the type hierarchy are called widening reference conversions

Lecture Set 4: More About Methods and More About Operators Methods Definitions Invocations More arithmetic operators Operator Side effects Operator Precedence Short-circuiting main method public static

Lecture Set 4: More About Methods and More About Operators Methods Definitions Invocations More arithmetic operators Operator Side effects Operator Precedence Short-circuiting main method public static

### LECTURE 17. Expressions and Assignment

LECTURE 17 Expressions and Assignment EXPRESSION SYNTAX An expression consists of An atomic object, e.g. number or variable. An operator (or function) applied to a collection of operands (or arguments)

### Operators in C. Staff Incharge: S.Sasirekha

Operators in C Staff Incharge: S.Sasirekha Operators An operator is a symbol which helps the user to command the computer to do a certain mathematical or logical manipulations. Operators are used in C

### The Arithmetic Operators. Unary Operators. Relational Operators. Examples of use of ++ and

The Arithmetic Operators The arithmetic operators refer to the standard mathematical operators: addition, subtraction, multiplication, division and modulus. Op. Use Description + x + y adds x and y x y

### The Arithmetic Operators

The Arithmetic Operators The arithmetic operators refer to the standard mathematical operators: addition, subtraction, multiplication, division and modulus. Examples: Op. Use Description + x + y adds x

### Operators and Expressions in C & C++ Mahesh Jangid Assistant Professor Manipal University, Jaipur

Operators and Expressions in C & C++ Mahesh Jangid Assistant Professor Manipal University, Jaipur Operators and Expressions 8/24/2012 Dept of CS&E 2 Arithmetic operators Relational operators Logical operators

### Computers Programming Course 6. Iulian Năstac

Computers Programming Course 6 Iulian Năstac Recap from previous course Data types four basic arithmetic type specifiers: char int float double void optional specifiers: signed, unsigned short long 2 Recap

### Arithmetic Operators. Portability: Printing Numbers

Arithmetic Operators Normal binary arithmetic operators: + - * / Modulus or remainder operator: % x%y is the remainder when x is divided by y well defined only when x > 0 and y > 0 Unary operators: - +

### LECTURE 3 C++ Basics Part 2

LECTURE 3 C++ Basics Part 2 OVERVIEW Operators Type Conversions OPERATORS Operators are special built-in symbols that have functionality, and work on operands. Operators are actually functions that use

### Unit 3. Operators. School of Science and Technology INTRODUCTION

INTRODUCTION Operators Unit 3 In the previous units (unit 1 and 2) you have learned about the basics of computer programming, different data types, constants, keywords and basic structure of a C program.

### Le L c e t c ur u e e 2 To T p o i p c i s c t o o b e b e co c v o e v r e ed e Variables Operators

Course Name: Advanced Java Lecture 2 Topics to be covered Variables Operators Variables -Introduction A variables can be considered as a name given to the location in memory where values are stored. One

### JAVA OPERATORS GENERAL

JAVA OPERATORS GENERAL Java provides a rich set of operators to manipulate variables. We can divide all the Java operators into the following groups: Arithmetic Operators Relational Operators Bitwise Operators

Sir Muhammad Naveed Arslan Ahmed Shaad (1163135 ) Muhammad Bilal ( 1163122 ) www.techo786.wordpress.com CHAPTER: 2 NOTES:- VARIABLES AND OPERATORS The given Questions can also be attempted as Long Questions.

### Operators in java Operator operands.

Operators in java Operator in java is a symbol that is used to perform operations and the objects of operation are referred as operands. There are many types of operators in java such as unary operator,

### Will introduce various operators supported by C language Identify supported operations Present some of terms characterizing operators

Operators Overview Will introduce various operators supported by C language Identify supported operations Present some of terms characterizing operators Operands and Operators Mathematical or logical relationships

### COMP Primitive and Class Types. Yi Hong May 14, 2015

COMP 110-001 Primitive and Class Types Yi Hong May 14, 2015 Review What are the two major parts of an object? What is the relationship between class and object? Design a simple class for Student How to

### Java Primer 1: Types, Classes and Operators

Java Primer 1 3/18/14 Presentation for use with the textbook Data Structures and Algorithms in Java, 6th edition, by M. T. Goodrich, R. Tamassia, and M. H. Goldwasser, Wiley, 2014 Java Primer 1: Types,

### SOFTWARE DEVELOPMENT 1. Operators 2018W A. Ferscha (Institute of Pervasive Computing, JKU Linz)

SOFTWARE DEVELOPMENT 1 Operators 2018W (Institute of Pervasive Computing, JKU Linz) OPERATORS Operators are required to form expressions. Depending on the number of operands they take, they are called:

### Operators and Expressions:

Operators and Expressions: Operators and expression using numeric and relational operators, mixed operands, type conversion, logical operators, bit operations, assignment operator, operator precedence

### Programming Languages, Summary CSC419; Odelia Schwartz

Programming Languages, Summary CSC419; Odelia Schwartz Chapter 1 Topics Reasons for Studying Concepts of Programming Languages Programming Domains Language Evaluation Criteria Influences on Language Design

### Data Types and Variables in C language

Data Types and Variables in C language Disclaimer The slides are prepared from various sources. The purpose of the slides is for academic use only Operators in C C supports a rich set of operators. Operators

### Introduction Primitive Data Types Character String Types User-Defined Ordinal Types Array Types. Record Types. Pointer and Reference Types

Chapter 6 Topics WEEK E FOUR Data Types Introduction Primitive Data Types Character String Types User-Defined Ordinal Types Array Types Associative Arrays Record Types Union Types Pointer and Reference

### Full file at

Java Programming: From Problem Analysis to Program Design, 3 rd Edition 2-1 Chapter 2 Basic Elements of Java At a Glance Instructor s Manual Table of Contents Overview Objectives s Quick Quizzes Class

### Motivation for typed languages

Motivation for typed languages Untyped Languages: perform any operation on any data. Example: Assembly movi 5 r0 // Move integer 5 (some representation) to r0 addf 3.6 r0 // Treat bit representation in

### ESCI 386 IDL Programming for Advanced Earth Science Applications Lesson 1 IDL Operators

ESCI 386 IDL Programming for Advanced Earth Science Applications Lesson 1 IDL Operators ARITHMATIC OPERATORS The assignment operator in IDL is the equals sign, =. IDL uses all the familiar arithmetic operators

### SECTION II: LANGUAGE BASICS

Chapter 5 SECTION II: LANGUAGE BASICS Operators Chapter 04: Basic Fundamentals demonstrated declaring and initializing variables. This chapter depicts how to do something with them, using operators. Operators

### ISA 563 : Fundamentals of Systems Programming

ISA 563 : Fundamentals of Systems Programming Variables, Primitive Types, Operators, and Expressions September 4 th 2008 Outline Define Expressions Discuss how to represent data in a program variable name

### Operators and Type Conversion. By Avani M. Sakhapara Assistant Professor, IT Dept, KJSCE

Operators and Type Conversion By Avani M. Sakhapara Assistant Professor, IT Dept, KJSCE Introduction An operator is a symbol which represents a particular operation that can be performed on some data.

### GO - OPERATORS. This tutorial will explain the arithmetic, relational, logical, bitwise, assignment and other operators one by one.

http://www.tutorialspoint.com/go/go_operators.htm GO - OPERATORS Copyright tutorialspoint.com An operator is a symbol that tells the compiler to perform specific mathematical or logical manipulations.

### Operators. Lecture 3 COP 3014 Spring January 16, 2018

Operators Lecture 3 COP 3014 Spring 2018 January 16, 2018 Operators Special built-in symbols that have functionality, and work on operands operand an input to an operator Arity - how many operands an operator

### Outline. Performing Computations. Outline (cont) Expressions in C. Some Expression Formats. Types for Operands

Performing Computations C provides operators that can be applied to calculate expressions: tax is 8.5% of the total sale expression: tax = 0.085 * totalsale Need to specify what operations are legal, how

### Announcements. Lab Friday, 1-2:30 and 3-4:30 in Boot your laptop and start Forte, if you brought your laptop

Announcements Lab Friday, 1-2:30 and 3-4:30 in 26-152 Boot your laptop and start Forte, if you brought your laptop Create an empty file called Lecture4 and create an empty main() method in a class: 1.00

### Expressions. Arithmetic expressions. Logical expressions. Assignment expression. n Variables and constants linked with operators

Expressions 1 Expressions n Variables and constants linked with operators Arithmetic expressions n Uses arithmetic operators n Can evaluate to any value Logical expressions n Uses relational and logical

### Java enum, casts, and others (Select portions of Chapters 4 & 5)

Enum or enumerates types Java enum, casts, and others (Select portions of Chapters 4 & 5) Sharma Chakravarthy Information Technology Laboratory (IT Lab) Computer Science and Engineering Department The

### Java provides a rich set of operators to manipulate variables. We can divide all the Java operators into the following groups:

Basic Operators Java provides a rich set of operators to manipulate variables. We can divide all the Java operators into the following groups: Arithmetic Operators Relational Operators Bitwise Operators

### 1.3b Type Conversion

1.3b Type Conversion Type Conversion When we write expressions involved data that involves two different data types, such as multiplying an integer and floating point number, we need to perform a type

### 22c:111 Programming Language Concepts. Fall Types I

22c:111 Programming Language Concepts Fall 2008 Types I Copyright 2007-08, The McGraw-Hill Company and Cesare Tinelli. These notes were originally developed by Allen Tucker, Robert Noonan and modified

### Informatics Ingeniería en Electrónica y Automática Industrial

Informatics Ingeniería en Electrónica y Automática Industrial Operators and expressions in C Operators and expressions in C Numerical expressions and operators Arithmetical operators Relational and logical

### CSC 1214: Object-Oriented Programming

CSC 1214: Object-Oriented Programming J. Kizito Makerere University e-mail: jkizito@cis.mak.ac.ug www: http://serval.ug/~jona materials: http://serval.ug/~jona/materials/csc1214 e-learning environment:

### BRANCHING if-else statements

BRANCHING if-else statements Conditional Statements A conditional statement lets us choose which statement t t will be executed next Therefore they are sometimes called selection statements Conditional

### COSC252: Programming Languages: Basic Semantics: Data Types. Jeremy Bolton, PhD Asst Teaching Professor

COSC252: Programming Languages: Basic Semantics: Data Types Jeremy Bolton, PhD Asst Teaching Professor Copyright 2015 Pearson. All rights reserved. Common Types and Design Concerns Primitive Data Types

### Unit-2 (Operators) ANAND KR.SRIVASTAVA

Unit-2 (Operators) ANAND KR.SRIVASTAVA 1 Operators in C ( use of operators in C ) Operators are the symbol, to perform some operation ( calculation, manipulation). Set of Operations are used in completion

### 9/7/17. Outline. Name, Scope and Binding. Names. Introduction. Names (continued) Names (continued) In Text: Chapter 5

Outline Name, Scope and Binding In Text: Chapter 5 Names Variable Binding Type bindings, type conversion Storage bindings and lifetime Scope Lifetime vs. Scope Referencing Environments N. Meng, S. Arthur

### JAC444 - Lecture 1. Introduction to Java Programming Language Segment 4. Jordan Anastasiade Java Programming Language Course

JAC444 - Lecture 1 Introduction to Java Programming Language Segment 4 1 Overview of the Java Language In this segment you will be learning about: Numeric Operators in Java Type Conversion If, For, While,

### Principles of Programming Languages. Lecture Outline

Principles of Programming Languages CS 492 Lecture 1 Based on Notes by William Albritton 1 Lecture Outline Reasons for studying concepts of programming languages Programming domains Language evaluation

### Java Notes. 10th ICSE. Saravanan Ganesh

Java Notes 10th ICSE Saravanan Ganesh 13 Java Character Set Character set is a set of valid characters that a language can recognise A character represents any letter, digit or any other sign Java uses

### Chapter 1. Preliminaries

Chapter 1 Preliminaries Chapter 1 Topics Reasons for Studying Concepts of Programming Languages Programming Domains Language Evaluation Criteria Influences on Language Design Language Categories Language

### G Programming Languages - Fall 2012

G22.2110-003 Programming Languages - Fall 2012 Lecture 3 Thomas Wies New York University Review Last week Names and Bindings Lifetimes and Allocation Garbage Collection Scope Outline Control Flow Sequencing

### o Counter and sentinel controlled loops o Formatting output o Type casting o Top-down, stepwise refinement

Last Time Let s all Repeat Together 10/3/05 CS150 Introduction to Computer Science 1 1 We covered o Counter and sentinel controlled loops o Formatting output Today we will o Type casting o Top-down, stepwise

### Chapter 5 Names, Bindings, Type Checking, and Scopes

Chapter 5 Names, Bindings, Type Checking, and Scopes 長庚大學資訊工程學系 陳仁暉 助理教授 Tel: (03) 211-8800 Ext: 5990 E-mail: jhchen@mail.cgu.edu.tw URL: http://www.csie.cgu.edu.tw/jhchen All rights reserved. No part

### Chapter 5 Names, Binding, Type Checking and Scopes

Chapter 5 Names, Binding, Type Checking and Scopes Names - We discuss all user-defined names here - Design issues for names: -Maximum length? - Are connector characters allowed? - Are names case sensitive?

### Programming for Engineers Iteration

Programming for Engineers Iteration ICEN 200 Spring 2018 Prof. Dola Saha 1 Data type conversions Grade average example,-./0 class average = 23450-67 893/0298 Grade and number of students can be integers

### CS 112 Introduction to Computing II. Wayne Snyder Computer Science Department Boston University

CS 112 Introduction to Computing II Wayne Snyder Department Boston University Today: Java basics: Compilation vs Interpretation Program structure Statements Values Variables Types Operators and Expressions

### CSE 1001 Fundamentals of Software Development 1. Identifiers, Variables, and Data Types Dr. H. Crawford Fall 2018

CSE 1001 Fundamentals of Software Development 1 Identifiers, Variables, and Data Types Dr. H. Crawford Fall 2018 Identifiers, Variables and Data Types Reserved Words Identifiers in C Variables and Values

### UNIT 3 OPERATORS. [Marks- 12]

1 UNIT 3 OPERATORS [Marks- 12] SYLLABUS 2 INTRODUCTION C supports a rich set of operators such as +, -, *,,

### Basics of Java Programming

Basics of Java Programming Lecture 2 COP 3252 Summer 2017 May 16, 2017 Components of a Java Program statements - A statement is some action or sequence of actions, given as a command in code. A statement

### CONTENTS: Compilation Data and Expressions COMP 202. More on Chapter 2

CONTENTS: Compilation Data and Expressions COMP 202 More on Chapter 2 Programming Language Levels There are many programming language levels: machine language assembly language high-level language Java,

### CT 229. Java Syntax 26/09/2006 CT229

CT 229 Java Syntax 26/09/2006 CT229 Lab Assignments Assignment Due Date: Oct 1 st Before submission make sure that the name of each.java file matches the name given in the assignment sheet!!!! Remember:

### Review of the C Programming Language

Review of the C Programming Language Prof. James L. Frankel Harvard University Version of 11:55 AM 22-Apr-2018 Copyright 2018, 2016, 2015 James L. Frankel. All rights reserved. Reference Manual for the

### Introduction. Primitive Data Types: Integer. Primitive Data Types. ICOM 4036 Programming Languages

ICOM 4036 Programming Languages Primitive Data Types Character String Types User-Defined Ordinal Types Array Types Associative Arrays Record Types Union Types Pointer and Reference Types Data Types This

### Overview (4) CPE 101 mod/reusing slides from a UW course. Assignment Statement: Review. Why Study Expressions? D-1

CPE 101 mod/reusing slides from a UW course Overview (4) Lecture 4: Arithmetic Expressions Arithmetic expressions Integer and floating-point (double) types Unary and binary operators Precedence Associativity

### Chapter 7. Additional Control Structures

Chapter 7 Additional Control Structures 1 Chapter 7 Topics Switch Statement for Multi-Way Branching Do-While Statement for Looping For Statement for Looping Using break and continue Statements 2 Chapter

### Programming in C++ 6. Floating point data types

Programming in C++ 6. Floating point data types! Introduction! Type double! Type float! Changing types! Type promotion & conversion! Casts! Initialization! Assignment operators! Summary 1 Introduction

### Definition: Data Type A data type is a collection of values and the definition of one or more operations on those values.

Data Types 1 Definition: Data Type A data type is a collection of values and the definition of one or more operations on those values. Base Data Types All the values of the type are ordered and atomic.

### Programming Languages Third Edition. Chapter 7 Basic Semantics

Programming Languages Third Edition Chapter 7 Basic Semantics Objectives Understand attributes, binding, and semantic functions Understand declarations, blocks, and scope Learn how to construct a symbol

### Arithmetic and Bitwise Operations on Binary Data

Arithmetic and Bitwise Operations on Binary Data CSCI 2400: Computer Architecture ECE 3217: Computer Architecture and Organization Instructor: David Ferry Slides adapted from Bryant & O Hallaron s slides

### Ruby: Introduction, Basics

Ruby: Introduction, Basics Computer Science and Engineering College of Engineering The Ohio State University Lecture 4 Ruby vs Java: Similarities Imperative and object-oriented Classes and instances (ie

### Chapter 4: Basic C Operators

Chapter 4: Basic C Operators In this chapter, you will learn about: Arithmetic operators Unary operators Binary operators Assignment operators Equalities and relational operators Logical operators Conditional

### Data Handing in Python

Data Handing in Python As per CBSE curriculum Class 11 Chapter- 3 By- Neha Tyagi PGT (CS) KV 5 Jaipur(II Shift) Jaipur Region Introduction In this chapter we will learn data types, variables, operators