Ø mm. SYSTEM KAN-therm. Steel. Traditional material in modern technology TECHNOLOGY OF SUCCESS ISO 9001
|
|
|
- Lizbeth Francis
- 5 years ago
- Views:
Transcription
1 Ø mm SYSTEM KAN-therm Steel Traditional material in modern technology TECHNOLOGY OF SUCCESS
2 System KAN-therm Steel - assortment press carbon steel pipe, zinc coated - bar 6 m 12 1,2 * /624 m 15 1, /1290 m 18 1, /1524 m 22 1, /1290 m 28 1, /624 m 35 1, /402 m 42 1, /150 m 54 1, /366 m 66,7 1, /222 m 76, /222 m 88, /222 m /114 m press male connector 12 R⅜ * /200 pc 15 R⅜ /200 pc 15 R½ /200 pc 18 R½ /160 pc 18 R¾ /100 pc 22 R½ /70 pc 22 R¾ /100 pc 22 R /60 pc 28 R¾ /60 pc 28 R /60 pc 35 R /40 pc 35 R1¼ /40 pc 42 R1½ /24 pc 54 R /12 pc 66,7 R2½ /4 pc 76,1 R2½ /26 pc 88,9 R /20 pc press male union connector 15 R½ /50 pc 18 R½ /60 pc 22 R¾ /40 pc 28 R /30 pc 35 R1¼ /20 pc 42 R1½ /16 pc 54 R /10 pc 155
3 press female union connector (for VK radiators) 15 G¾ /100 pc 18 G¾ /100 pc press half union with flat gasket 15 G¾ * /120 pc 18 G¾ * /100 pc 22 G1 * /60 pc 28 G1¼ * /40 pc 35 G1½ * /32 pc 42 G1¾ * /12 pc 54 G2⅜ * /8 pc press female union connector 15 Rp½ /50 pc 18 Rp½ /60 pc 22 Rp¾ /40 pc 28 Rp /30 pc 35 Rp1¼ /16 pc 42 Rp1½ /12 pc 54 Rp /4 pc press female connector 12 Rp½ * /130 pc 15 Rp½ /130 pc 18 Rp½ /120 pc 18 Rp¾ /80 pc 22 Rp½ /100 pc 22 Rp¾ /100 pc 28 Rp½ /60 pc 28 Rp¾ /60 pc 28 Rp /60 pc 35 Rp½ /40 pc 35 Rp¾ /40 pc 35 Rp /40 pc 35 Rp1¼ /30 pc 42 Rp1½ /42 pc 54 Rp /32 pc 156 SYSTEM KAN therm Steel
4 press nipple female connector 12 Rp⅜ * /200 pc 12 Rp½ * /200 pc 15 Rp½ /200 pc 18 Rp½ /160 pc 18 Rp¾ /100 pc 22 Rp½ /70 pc 22 Rp¾ /100 pc press coupling * /140 pc /140 pc /140 pc /80 pc /60 pc /40 pc /24 pc /16 pc 66,7 66, /4 pc 76,1 76, /- pc 88,9 88, /- pc /- pc press reducing coupling /140 pc press slip coupling * /60 pc /60 pc /60 pc /60 pc /40 pc /20 pc /16 pc /8 pc 66,7 66, /4 pc 76,1 76, /- pc 88,9 88, /- pc /- pc 157
5 press 90 elbow * /150 pc /150 pc /90 pc /60 pc /30 pc /10 pc /16 pc /8 pc 66,7 66, /2 pc 76,1 76, /- pc 88,9 88, /- pc /- pc press nipple 90 elbow * /120 pc /120 pc /80 pc /60 pc /30 pc /10 pc /8 pc /6 pc 66,7 66, /2 pc 76,1 76, /- pc 88,9 88, /- pc /- pc press 45 elbow /150 pc /120 pc /70 pc /40 pc /25 pc /16 pc /8 pc 66,7 66, /2 pc 76,1 76, /- pc 88,9 88, /- pc /- pc 158 SYSTEM KAN therm Steel
6 press nipple 45 elbow /150 pc /120 pc /60 pc /40 pc /25 pc /16 pc /8 pc 66,7 66, /2 pc 76,1 76, /- pc 88,9 88, /- pc /- pc press tee * /80 pc /80 pc /70 pc /40 pc /30 pc /15 pc /8 pc /6 pc 66,7 66, /2 pc 76,1 76,1 76, /- pc 88,9 88,9 88, /- pc /- pc 159
7 press reducing tee * /80 pc * /80 pc /80 pc /60 pc * /70 pc /60 pc /70 pc * /50 pc /50 pc /50 pc /40 pc /30 pc /30 pc /30 pc /20 pc /20 pc /20 pc /20 pc /12 pc /12 pc /12 pc /8 pc /8 pc /8 pc /8 pc 66, , /2 pc 66, , /2 pc 66, , /2 pc 66, , /2 pc 76, , /14 pc 76, , /14 pc 76, , /14 pc 76, , /14 pc 76, , /- pc 76,1 66,7 76, /1 pc 160 SYSTEM KAN therm Steel
8 press reducing tee 88, , /14 pc 88, , /14 pc 88, , /14 pc 88, , /12 pc 88, , /12 pc 88,9 66,7 88, /1 pc 88,9 76,1 88, /- pc /12 pc /12 pc /12 pc /12 pc /12 pc , /10 pc , /- pc press reducing tee /50 pc /50 pc press pipe crosss /50 pc /50 pc /30 pc /30 pc /30 pc /30 pc /20 pc press crossing * /8 pc * /8 pc * /4 pc * /14 pc * /8 pc * /4 pc press crossing pair single * pc * pc * pc pc pc pc pc 161
9 press crossing pair double * pc * pc * pc * pc pc pc pc pc pc press nipple reducer * /200 pc * /200 pc * /140 pc /200 pc /140 pc /120 pc /70 pc /100 pc /80 pc /50 pc /60 pc /24 pc /30 pc /24 pc /16 pc /16 pc /16 pc /30 pc /16 pc 66, /4 pc 66, /4 pc 66, /4 pc 66, /4 pc 76, /- pc 76, /- pc 76,1 66, /4 pc 88, /- pc 88,9 66, /4 pc 88,9 76, /- pc , /4 pc , /- pc , /- pc 162 SYSTEM KAN therm Steel
10 press male elbow 12 R⅜ * /150 pc 15 R⅜ /150 pc 15 R½ /150 pc 18 R½ /100 pc 22 R¾ /60 pc 28 R /30 pc 35 R1¼ /10 pc 42 R1½ /12 pc 54 R /8 pc press male elbow - short 12 R⅜ * /100 pc 15 R⅜ /100 pc 15 R½ /100 pc 18 R½ /100 pc 22 R¾ /60 pc press female elbow 15 Rp⅜ /150 pc 15 Rp½ /100 pc 18 Rp½ /60 pc 22 Rp½ /30 pc 22 Rp¾ /30 pc 28 Rp½ /30 pc 28 Rp¾ /30 pc 28 Rp /30 pc 35 Rp½ /10 pc 35 Rp¾ /10 pc 35 Rp /10 pc press female elbow - short 22xRp½ * /50 pc 28xRp½ * /30 pc 35xRp½ * /10 pc 163
11 press female tee 15 Rp½ /80 pc 18 Rp½ /50 pc 18 Rp¾ /50 pc 22 Rp½ /50 pc 22 Rp¾ /40 pc 28 Rp½ /30 pc 28 Rp¾ /30 pc 28 Rp /30 pc 35 Rp½ /20 pc 35 Rp¾ /20 pc 35 Rp /20 pc 42 Rp½ /16 pc 42 Rp¾ /16 pc 42 Rp /12 pc 54 Rp½ /8 pc 54 Rp¾ /8 pc 54 Rp /8 pc 66,7 Rp¾ 66, /2 pc 76,1 Rp¾ 76, /- pc 88,9 Rp¾ 88, /- pc 108 Rp¾ /- pc crossover * /80 pc /80 pc /60 pc /50 pc /20 pc bend * /80 pc /80 pc /60 pc /40 pc /20 pc /8 pc /4 pc /2 pc 164 SYSTEM KAN therm Steel
12 press cup /80 pc /300 pc /240 pc /130 pc /75 pc /48 pc /32 pc 66, /4 pc 76, /- pc 88, /- pc /- pc In case of using a plug 64 mm in diameter it is necessary to use a sleeve of the same diameter in order to make a connection. press flange PN pc pc pc 66, pc 76, pc 88, pc pc Code Z D D2 K B flat gasket FPM Viton GRUPA: I 15/ /500 pc /500 pc /400 pc /400 pc /300 pc /300 pc Flat gaskets FPM/Viton may be used in KAN-therm Steel and Inox systems. Do not use in hot water systems. 165
13 LBP EPDM O-Ring 12 * /600 pc /600 pc /500 pc /500 pc /400 pc /400 pc /300 pc /300 pc The LBP EPDM O-Rings can be used in System KAN-therm Steel and Inox. O-Ring LBP FPM Viton /600 pc /500 pc /500 pc /400 pc /400 pc /300 pc /300 pc The LBP FPM/Viton O-Rings can be used in System KAN-therm Steel and Inox. Do not use in hot water installations. EPDM O-Ring 66, /100 pc 76, /100 pc 88, /100 pc /50 pc O-Ring FPM Viton 66, /100 pc 76, /100 pc 88, /100 pc /50 pc Do not use in hot water installations. 166 SYSTEM KAN therm Steel
14 Tools for Steel cutter for steel pipes mm pc mm pc wheel for cutter for steel pipes - service element * Code Packing UM Price EUR/UM pc electric cutter Size * Code Packing JM Price EUR/UM mm pc Electric cutter is sold without the cutting wheel. wheel for electric cutter for steel pipes - service element * Code Packing UM Price EUR/UM pc electric cutter mm pc pipe support mm pc stripping tool -drill set mm pc electric press tool 230V - Power Press E Basic Pack mm ZAPR01 1 pc 167
15 rechargeable press tool - Aku Press mm ZAPRAK 1 pc M profile press jaws for Power and Aku Press pc pc pc pc pc pc pc pc rechargeable press tool UAP mm UAP100 1 pc press jaws for UAP *** BP64M 1 pc 66,7 BP667M 1 pc 76,1 BP761M 1 pc 88,9 BP889M 1 pc 108 BP108M 1 pc ECO 301 press machine * Code Packing UM Price EUR/UM pc ECO 301 press jaw pc pc pc pc pc 168 SYSTEM KAN therm Steel
16 ECO 301 HP Snap On collar pc pc pc 66, pc collars mm needs additional adapter ZB 303. collar 66,7 mm needs additional adapter ZB 323. adapter ZB 303 for ECO 301 press machine pc adapter ZB 323 for ECO301 66, pc ACO 401 press machine (battery powered) 76, pc HP collar for ACO 401 press machine 76, pc 88, pc pc 169
PVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
Stainless Steel Parts & Accessories Catalog NOVEMBER 2017
Stainless Steel Parts & Accessories Catalog NOVEMBER 2017 www.airnet-system.com TABLE OF CONTENTS PIPING PIPE 304L... 3 PIPE 316L... 3 FITTINGS QUICK DROP... 4 SWAN NECK... 4 ELBOW 45... 4 ELBOW 90...5
Combi-System. Composition pipe Copipe
Combi-System Composition pipe Copipe no. Composition pipe Copipe white rolls DN 10 x 2.0 mm length per roll 50 m 150 10 54 length per roll 100 m 150 01 54 length per roll 200 m 150 02 54 DN 12 16 x 2.0
PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
SOCKET & THREADED FITTINGS
PVC SCHEDULE 80 FITTINGS CH-PVC-0617 Effective June 26, 2017 Supercedes CH-PVC-0315 of March 30, 2015 SOCKET & THREADED FITTINGS Suggested List Prices Subject to Change Without Notice Visit our website
SOCKET & THREADED FITTINGS
PVC SCHEDULE 80 FITTINGS CH-PVC-1018 Effective October 1, 2018 Supercedes CH-PVC-0617 of June 26, 2017 SOCKET & THREADED FITTINGS Suggested List Prices Subject to Change Without Notice Visit our website
CH-PVC-0315 PVC SCHEDULE 80 FITTINGS. Effective March 30, 2015 Supercedes CH-PVC-0812 of August 27, coupling - threaded
PVC SCHEDULE 80 FITTINGS CH-PVC-0315 Effective March 30, 2015 Supercedes CH-PVC-0812 of August 27, 2012 socket & Threaded fittings Suggested List Prices Subject to Change Without Notice Visit our website
PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
C200 VALVE WITH UM ELECTRIC ACTUATOR
FEATURES The C200+UM Ball-valves guarantee the function of automatic shut-off of pipes made of PVC-U, PEHD, PP or PVDF. This PN10/16 pressure class valve is used to isolate low-pressure water, acid or
Index. Polypropylene Black Steel Stainless Steel. Brass All Threads Socketweld. Stainless Steel Polypropylene. Stainless Steel Polypropylene
Index Page Screwed Pipe Fittings Galvanised Polypropylene Black Steel Stainless Steel 1 3 5 9 Plumbing Products Plumbing - Brass Brass All Threads Socketweld 13 15 15 Tank Outlets Brass Stainless Steel
Viega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
MIXERS, BASIN & SINK FITTINGS DELUXE RANGE
MIXERS, BASIN & SINK FITTINGS 1. C.P. PILLAR COCK SWAN NECK DELUXE... 1125/- EACH 2. C.P. PILLAR COCK SWAN NECK UNIVERSAL... 1170/- EACH 3. C.P. PILLAR COCK SWAN NECK J BEND... 1125/- EACH 4. C.P. SINK
Valves, controls + systems Combi-System Copipe Composition pipe Cofit Connection system
Innovation + Quality Valves, controls + systems Combi-System Copipe Composition pipe Cofit Connection system Product overview DW-8501AT2407 Content Content Content 2 Summary Combi-System Connection system
bar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
Work with KAN Receive the prize!
Receive the prize! 2008 TECHNOLOGY OF SUCCESS We invite you to take part in the program Rules of the program are clear. Participants collect points and receive attractive prizes. How do you become the
Pipe & Accessories SCHEDULE 80 PIPE & FITTINGS. 174 If You Don t See it, Just Ask! Who says Pipe Men Can t Jump? Schedule 80 PVC Nipples
SCHEDULE 80 PIPE & FITTINGS Schedule 80 PVC Nipples 125870 w" x Close 125873 w" x 1 w" 125875 w" x 2" 125880 w" x 3" 125885 w" x 4" 125887 w" x 5" 125890 w" x 6" 125895 w" x 8" 125900 w" x 10" 125905 w"
PP-R & PVC-U Products Catalogue
PP-R & PVC-U Products Catalogue INDEX PP-R Products Page 3 PVC-U Products Page 7 Points To Pay Attention When Installing Ppr Pipes And Fittings Due to their brittle characteristic and behavior below 0
PVC SOLVENT WELD DRAIN WASTE & VENT
PVC-17R PAGE 1 november 007 COUPLING (Hub x Hub) 0 110 11 11 11 1171 1 1/ 0 7 00 00 0 10.9.79 1.0.. 1. REDUCER BUSHING (Spigot x Hub) Style 17 x TRAP ADAPTER (Spigot x Slip Joint ) 1 19.71 REDUCER COUPLING
SOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
PRESS-0115R2 Effective January 2, 2017 Supercedes PRESS-0115R of January 19, 2015
FITTINGS & ACCESSORIES FOR COPPER PIPING PRESS-0115R2 Effective January 2, 2017 Supercedes PRESS-0115R of January 19, 2015 Visit our website for the most current information FITTINGS NOTE: For all Press
PE PIPE & FITTINGS LDPE PIPE
LDPE PIPE All LDPE pipe is made with 100% virgin material ECO LDPE is made with 100% re-grind virgin material Pipes rated at 4 bar at 20 0 C No 2 for years All LDPE pipe is made and tested in our own factory
BLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
General Characteristics DM 80 Series - JIS Metric Tube
General haracteristics DM 80 Series - JIS Metric Tube Introduction Fitting Material Specifications K = Stainless Steel G = arbon Steel = opper Nickel 70/30 = opper Nickel 90/10 D = Duplex Z = Super Duplex
BS up.v.c SOIL, WASTE, VENT PIPES AND FITTINGS
Soil Waste & Vent Pipes Sweep Bend Sweep Bend with Inspection Opening 91¼ Soil Waste & Vent pipes for solvent weld connection to all fittings. Wall Length Mean Outside Thickness L in per M. Dia. D (mm)
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
WELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
Unitary Construction Double Wall Piping System
Unitary Construction Double Wall Piping System 221 Page intentionally left blank 222 Co-Extruded Double Containment Chem Proline Black PE Resin Crack resistant proprietary resin formulation Excellent abrasion
SharkBite 25 W ARRANTY Sh YEAR arkbite
25 SharkBite WARRANTY YEAR SharkBite The SharkBite Plumbing System SharkBite has established a reputation as one of Australia s best plumbing systems. Quick & easy to use. Fittings for PEX and Copper Pipe
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
press-fit systems for diverse applications CONNECT WITH CONFIDENCE
press-fit systems for diverse applications CONNECT WITH CONFIDENCE Connect with Confidence With a wealth of expertise and the broadest range of solutions and systems on the market, Pegler Yorkshire s Connect
6.5 Cu. Ft. S-Series Blast Pot Part Numbers & Schematics Guide
Always Innovative. Always Reliable. 6.5 Cu. Ft. S-Series Blast Pot Part Numbers & Schematics Guide Metering Valve Remote Configurations Standard Features Upgrade Options Moisture Separator Bantam Part
8100, 8200, , 8202, 8203, 8204, 8205, 8206
800, 8200, 8300 820, 8202, 8203, 8204, 8205, 8206 W R A, O USA T: 800 32 7950 440 998 2788 F: 440 992 2925... 023208 2 INSTRUCTIONS FOR 3/4,, -/4 DIAMETER TAPS FIGURE A B C D E F G HOT TAP SPINDLE HOT
COPPER NICKEL FORGED AND MACHINED FITTINGS
adaptors in copper nickel butt welding ends x female thread ØD1 x ØE mm ØE L A.A/f weight (NPT) mm mm Kg/piece 0.38 x 0.5 16 x 20 1/2" 34 27 0.07 0.5 x 0.75 20 x 25 3/4" 37 32 0.1 0.75 x 0.75 25 x 25 3/4"
CH-PVDF RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS. Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov.
RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS CH-PVDF-1115 Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov. 25, 2013 Suggested list prices subject to change without notice. UPC
Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
AusPress. Install the staple plumbing material of copper using Australian sizes for water, gas or solar (high temperature). Copper.
M AusPress Install the staple plumbing material of copper using Australian sizes for water, gas or solar (high temperature). V profile DN DN to 00 s Press a DN fitting onto copper tube in under seconds.
Viega Pexcel Water System
Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
Duo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
EXCELPrime SINGLE WALL STOVE PIPE
SINGLE WALL STOVE PIPE 28 Technical Information Technical Information Certification has been tested and listed by Intertek Testing Services Applications is designed to be used as a connector between a
PIPE FITTINGS - PLASTIC - ABS/DWV ARH A
PIPE FITTINGS - PLASTIC - ABS/DWV ARH 172-251A NIBCO DRAINAGE FITTINGS AUG 7 2015 VENDOR NUMBER 039923 CANCELS APR 3 2015 SOIL PIPE ADAPTER, CAST IRON - Hub x Hub 19400 5800 2" $23.66 $47.32 + 19402 5800
Section 1. Schedule 80 PVC Piping System. Pipe and Fittings Sizes ¼" to 16"
Section Schedule 80 PVC Piping System Pipe and Fittings s ¼" to 6" Effective September 27, 200 Glossary FP = Female Pipe hread MP = Male Pipe hread S = apered Socket SPG = Spigot End (same dimension as
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Price List Insert Fittings & Tank Tees
Price List Insert Fittings & Tank Tees LT-WS0613 LT-IFT0813 AUGUST JULY 1, 26, 2013 SUPERSEDES SUPERCEDES APRIL JAN 31, 11, 2011 PRICE LIST It's all about performance INSERT FITTINGS / TANK TEES BRONZE
PNEUMATIC CONVEYING COMPONENTS
PNEUMATIC CONVEYING COMPONENTS TUBING, PIPE, BENDS, COUPLINGS & FITTINGS A HIGH-PERFORMANCE COMPANY H-P Products is certified to ISO 9001:2008 welcome to h-p products! H-P Products specializes in supplying
Tech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
Viega Product Catalog. May The global leader. The global leader in plumbing, heating and pipe joining systems
Viega Product Catalog May 2014 The global leader The global leader in plumbing, heating and pipe joining systems Viega One source, multiple solutions Designed for peace of mind Viega manufactures and distributes
Inch-size One-touch Fittings. Applicable Tubing: Inch Size Connection Thread: UNF, NPT. How to Order. Applicable tubing O.D.
Inch- One-touch Fittings Series KQ Tubing: Inch Size Thread:, KQ 0 ow to Order S Symbol Nil ccessory Symbol KQN KQC KQ (KQ) roduct s color Body White Black One-touch s Release button Orange Red Name Nipple
ST-B. Plugs for Membranes. Product Description. Advantages & Benefits. Specifications. Compatible with
ST-B Plugs for Membranes D1 L D2 2 Plugs ST-B are used to seal already pierced membranes in various cable entry plates (KEL-DPU / KEL-DPZ / KEL-DP / KEL-QTA-DP) and DT grommets. Perfect for applications
SPARE PARTS LIST CP COMPRESSOR. Model CPD CPD 75
SPARE PARTS LIST CP COMPRESSOR Model CPD 75-00 EN 05 0 5 CPD 75 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? MAINTENANCE KITS STANDARD UNITS MOTOR-COMPRESSOR UNIT -7 AIR CIRCUIT -9
MK-MANTA I. Model MK-Manta I Core Drill Owner s Manual Parts List & Operating Instructions. serial number CAUTION
please record the serial number of your drill in this block. serial number For your one (1) year warranty to be effective, complete the warranty card (include the serial number) and mail it in as soon
Hose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER
Hose Menders We offer hose menders in a variety of materials to suit the products being conveyed. Hose PRICE EACH Pkg G0N NYLON HOSE MENDER Hose PRICE EACH Pkg G0S PLATED STEEL HOSE MENDER G0S-038 3 8"
BRASS BRASS FITTINGS 90 0 FEMALE ELBOW 90 0 FORGED FEMALE ELBOW 45 0 FEMALE ELBOW UNION TEE UNION FORGED TEE SAE# Approx. Wt. Lbs.
RSS FITTINGS RSS 90 0 FEMLE ELOW 2200P 3500 302 200 Part # Thread Size pprox. 28-001 1/8 0.55 0.56 0.09 28-002 1/4 0.78 0.68 0.13 28-003 3/8 0.84 0.81 0.16 28-004 1/2 1.09 1.00 0.34 28-005 3/4 1.16 1.25
WITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com JUNE C- BULLETIN A.C.V.I.M., REV.
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
PVC Effective June 26, 2017 Supercedes PVC-0415 of April 13, Tee Reducing - slip x slip x slip (Cont.) Tee - slip x slip x slip
PVC SCHEDULE 40 PRESSURE FITTINGS PVC-0617 Effective June 26, 2017 Supercedes PVC-0415 of April 13, 2015 Suggested List Prices Subject to Change Without Notice Visit our website for the most current information
SEPTEMBER Voted Top Product of 2010 by readers of PHPI Magazine
Polybutene Plumbing & Heating Price list SEPTEMBER 2011 Voted Top Product of 2010 by readers of PHPI Magazine 0800 043 8883 The Buteline Plumbing System is an integrated flexible plumbing system incorporating
Fig. List Incremental UPC Packaging No. Size Price Order Qty* Box Skid
PVC Schedule 40 Pressure Fittings PVC-0812 Effective Aug. 27, 2012 Supercedes PVC-0611 dated June 27, 2011 Suggested List Prices Subject to Change Without Notice Visit our website for the most current
Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.
Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
FITTINGS & CONNECTORS PRICE LIST EFFECTIVE JANUARY 1, 2018
N E T A F I M U S A FITTINGS & CONNECTORS PRICE LIST EFFECTIVE JANUARY, 208 2 FITTINGS & CONNECTORS PRICE LIST JANUARY, 208 WWW.NETAFIMUSA.COM FITTINGS & CONNECTORS THINWALL DRIPLINE FITTINGS Twist-Lock
Han-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
DIN 2353 French series adaptors
Adattatori DIN 2353 Serie Francese Pagina / Page 2 2 Nut Cutting rings 7 7410 Dado di serraggio Anellino tagliente Pagina / Page 3 4 5 Male stud couplings Male stud elbow 7430 7450 7460 Terminale diritto
DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
SCHEDULE 80 PVC. List Prices
SCHEDULE 80 PVC List Prices Effective: May 28, 2001 Revised June 2003 Why LASCO Recommends Sealant in Threaded Joints Teflon tape, when compressed between male and female threads in PVC fittings joints,
Radiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
CAMLOCK. Camlock MIL C CAMLOCK
Camlock MIL C-27487 Camlock MIL C-27487 MATERI MATIÈRE MATERI = Aluminium = Brass Laiton Latón SS = Stainless steel Inox PP = Polypropylene On request Sur demande Bajo pedido SIZE DIMENSIONS DIMENSIONES
PVC DWV Drain Waste Vent Fittings
PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Visit our web site www.spearsmfg.com 1212 SPEARS IE OF QUAITY PVC DRAI, WASTE AD VET (DWV) FITTIS ARE MAUFACTURED I STRICT COMPIACE TO ASTM D 2665. STADARDS
FRIGOCLIC AG3000 SERIES FLANGED MAGMETER
SERIES p Precision Flow Measurement An ONICON Brand RIGHT METER FOR Irrigation Chemigation Agricultural automation Well usage monitoring Dairy lagoons Features 5 5-YEAR WARRANTY LONGEST IN THE IRRIGATION
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Bellows are even provided for forming joints with main pipelines or sometimes
PVC DWV Drain Waste Vent Fittings
DWV Standards PVC DWV Drain Waste Vent Fittings TECICA IFORMATIO Contact Spears for any information not found. Page 983 Suitable for low pressure air handling 5 psi, not for distribution of compressed
Hose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER
We offer hose menders in a variety of materials to suit the products being conveyed. Hose Part Hose PRICE EACH Pkg Part Hose PRICE EACH Pkg G20S PLATED STEEL HOSE MENDER G20S-038 3 8" $ 2.30 $ 2.10 5 G20S-050
Insert Fittings and Tank Tees
Insert Fittings and Tank Tees Catalog LT-IFT1018 Effective Date: October, 2018 BRONZE / BRASS INSERT FITTINGS Bronze Male FOR IRRIGATION SYSTEMS ONLY - NOT FOR POTABLE WATER XL 312-003 1/2 200 20 312-004
PHYSICAL INFRASTRUCTURE QUICK SKU FINDER
PHYSICAL INFRASTRUCTURE QUICK FINDER Simplified Connectivity Simplified Connectivity combines our technical support services, products, and industry leading customer advocacy to create a comprehensive
TWIN SERIES CLAMPS. TWIN Series Clamps. Order codes p 26. Dimensions p 28. Mounting example p 31. Aluminium Twin Series Clamps p 32
TWIN eries Clamps TWIN ERIE CAMP Order codes p 26 imensions p 28 Mounting example p 31 Aluminium Twin eries Clamps p 32 PIPE CAMP - TWIN ERIE Order s PIPE CAMP MARIA PP: Polypropylene material Colour Blue
Spears FlameGuard CPVC SDR 13.5 Pipe and Schedule 40 and 80 fittings
Plastic Pipe and Fittings Plastic pipe and fittings are FM Approved for aboveground wet pipe fire protection systems for Light Hazard Occupancy sprinkler systems only. Except where noted otherwise, all
SUPERIOR ALUMINIUM COMPRESSED AIR RETICULATION
A SUBSIDIARY F PNEUTECH GRUP SUPERIR ALUMINIUM CMPRESSED AIR RETICULATIN INDUSTRIAL AIR SYSTEMS NZ FREEPHNE: Email: sales@industrialair.co.nz Web: www.industrialair.co.nz SUPERIR ALUMINIUM CMPRESSED AIR
Sincerely, Your Partners at Specified Fittings
N W E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
PREMIER PUMP & SUPPLY, INC. SCHEDULE 40 PVC PROVIDING YOU WITH THE VERY BEST SERVICE IN THE INDUSTRY! PAGE P - 1 MARCH
SCHEDULE 0 PVC D ESCRIPTION INCHES TEE ( SLIP X SLIP X SLIP ) 0-00 0-007 0-00 0-0 0-0 0-00 0-0 0-00 0-00 / / 90 ELL ( SLIP X SLIP ) 0-00 0-007 0-00 0-0 0-0 0-00 0-0 0-00 0-00 / / COUPLING ( SLIP ) 9-00
Price Book - Section F Pipe & Accessories
Effective Date March, 20 Price Book - SCI Coop-Let F.T. Part No. Size / Description List Price 2500 SCI Coop-Let F.T. /2" x "- /2 $8.20 2520 SCI Coop-Let F.T. /2" x 2"-2 /2 $8.20 250 SCI Coop-Let F.T.
TWIN Series Clamps. DIN 3015, Part 3. Order codes p 26. Dimensions p 28. Mounting example p 31. Aluminium Twin Series Clamps p 32
TWIN eries Clamps IN 3015, Part 3 twin series clamps Order codes p 26 imensions p 28 Mounting example p 31 Aluminium Twin eries Clamps p 32 Order s PIPE CAMP MARIA (two clamp halves) ingle weld plate P
C O M M E R C I A L. CALGARY EDMONTON LETHBRIDGE
C O M M E R C I A L www.alggin.com CALGARY EDMONTON LETHBRIDGE 4540-46th Ave. SE 12110-154 St. NW 1126-36 St. N (403) 252-0132 (780) 424-0132 (403) 320-8732 sales@alggin.com edmsales@alggin.com sales@alggin.com
Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
Stainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
Electronic pressure sensors
Presentation, type XML P For control circuits Presentation Pressure transmitters XML P are characterised by their thin fi lm technology. The stainless steel pressure sensing capsule is directly welded
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
Pipe Swivels. The Fitting Authority
Pipe Swivels The Fitting Authority 0507 007 007 3507 Straights 45 Elbows 307 307 507 5507 07 NPT / NPSM Swivel 90 Elbows 5607 NPT / NPSM Swivel Long Drop 07 077T NPSM Swivel / NPSM Swivel / NPSM Swivel
Compression Fittings 34 Series Inch
4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata
Parts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid
CLASS 150. Investment Cast Stainless Steel Threaded End Fittings
Investment Cast Stainless Steel Threaded End Fittings Covering sizes from /8 to, DIE ERSTE manufactures and supplies the highest quality investment cast stainless steel threaded end fittings. In this series,