Hudevad Plan XV. technical datasheet

Transcription

1 technical datasheet

2 Key benefits Minimalistic Scandinavian design Matches any architecture Vertical design Ideal for rooms with high ceilings and limited wall space Elegant flat front an be used either as a discreet design element or as a bold architectural statement 2

3 escription The udevad Plan XV is one of our most prestigious radiators. The vertical giant is a statement on the wall to be incorporated in interior design of the room, making it an active part of the decorating. The radiator has high outputs and outstanding functionality, which makes it a great choice for large halls that are difficult to heat. Material Front plate: 2.00 mm steel to E Mounting frame: 2 mm steel plate with welded-on brackets Test pressure 13 bar Max. operating pressure 10 bar in accordance with E 442 Max. operating temperature 95 Surface treatment ength eight epth Tappings Installation Optional extras Pretreatment: egreasing and passivation Priming: Primed with water based paint in pale grey mm, in increments of 100 mm The front panel is 150 mm longer than the concealed radiators mm, in increments of 100 mm The front panel is mm higher than the concealed radiators 86, 116 and 173 mm, suitable for RIOpanel Standard types 21, 22 and 33 1/2 standard Wall mounted (mounting frame is included) Air vents and plugs are included Front panel with special dimensions, please consult udevad Other combinations of front panel and radiators, please consult udevad olour Powder-coated white RA 9010, gloss 70 Options: Painted in other standard RA and BS colours Surface treatment in accordance with I and E 442 3

4 Tapping designation Standard tappings: 1/2 EF G Principle drawing Front view E F Underside tappings E, F Underside tappings G, Plan XV with 2, 3 and 4 radiators, profile F Wall distances Rear view E epth, mm, mm, mm Rear view entre distance is calculated as: Total length 124 mm engths (): mm in increments of 100 mm The front panel is 150 mm longer than the concealed radiators G

5 Tapping designation Mounting frame with front panel outline, rear view Mounting fram, rear view , Attach the tube holder supplied to the flow side. ength of mounting fram is calculated as: Total length 410 mm. Bracket distance can be seen from the table below. Mounting frame dimensions eight, front panel,mm = height, mounting frame, mm 1, mm , mm 3, mm 5

6 Built-in valve Application Tappings Built-in valve For use where a thermostatic valve is to be integrated within the radiator, where discreet pipework is required or for the ease of installation. Format 1 and 3 valve radiators have underside 1/2 tappings. Tapping combinations 2E, 2F or E-F can be ordered. Air vent opposite the valve can be ordered. The valve is factory fitted on the flow pipe supplied. Formats 1 and 3 valves are supplied with spindle extenders for all depths. OTE: Spindle extender to be dismounted for presetting. Plan XV with built-in valve format 1 (front) and format 3 (side/end) Built-in valve format 1 G Profile (Bottom) rear view (Top) rear view F E entre distance is calculated as: Total length 124 mm OTE: The valve can be concealed behind the front panel by mounting it turned sideways under the radiator. In this case, a built-in valve should not be ordered. Please contact udevad. Wall distances epth, mm, mm, mm

7 Built-in format 3 G 40 Profile (Bottomt) Rear view (Bottomt) Rear view 40 F E Wall distances epth, mm, mm, mm entre distance is calculated as: Total length 124 mm OTE: The valve can be concealed behind the front panel by mounting it turned sideways under the radiator. In this case, a built-in valve should not be ordered. Please contact udevad. Weight table for Plan XV, kg/metre (height) epth, mm Radiator type ength, mm PKP/21 30,3 36,0 41, 7 47,4 53,1 58,9 64, PK/22 34,4 40,9 47,5 54,0 60,6 67, 2 73, PK/33 45,5 54,3 63,3 72,2 81,1 90,0 99,0 7

8 Output, Watts/section at 75 /65 / eight, mm Radiator heights, mm 86 type PKP/21 epth, mm 116 type 2PK/ type 3PK/33 Output reduction %

9 Tapping designation Built-in valve format 3 Built-in valve format Built-in valve format 1 Built-in valve format