Concord Range BIM. The Stelrad you know and so much more... For more information call or visit

Transcription

1 Range Designer creates a distinctive look for any room, with four superstylish design optis from the LoLine at just 1 high the Vertical at up metres, every height in between. Flexible, highly efficient very, very good looking. Vertical Slimline BIM Choice of different radiar optis 1. Vertical: models, heights 3 lengths. Slimline: models, heights lengths 3. LoLine: 1 models, heights lengths. Plane: models, 3 heights, lengths from Outputs: 3 7 watts, Btu/hr For more informati call or visit Follow us facebook.com/stelradlimited you know so much more...

2 Range Designer Colour is 0 LoLine Plane

3 Range 50 Δt (75/5/0 C) LoLine Single Double LoLine Heat output Heat output Heat output UIN Watts Btu/hr UIN Watts Btu/hr UIN Watts Btu/hr Plee e: All products over metres wide will take weeks be delivered from date of. When product is ed it can be cancelled. t50 is the UK s industry stard for heating outputs, which h an operating temperature of 75/5/0 C if you have a low temperature heat source you may wish csider t0 or t30 output (see your installer or system designer).

4 Δt Single Double LoLine UIN UIN UIN Watts Btu/hr Watts Btu/hr Watts Btu/hr Heat output Heat output Heat output Range Single Plee e: All products over metres wide will take weeks be delivered from date of. When product is ed it can be cancelled. (5/55/0 C)

5 Δt Single Double LoLine UIN UIN UIN Watts Btu/hr Watts Btu/hr Watts Btu/hr Heat output Heat output Heat output Range Double Plee e: All products over metres wide will take weeks be delivered from date of. When product is ed it can be cancelled. (55/5/0 C)

6 Range Vertical 50 Δt (75/5/0 C) Vertical UIN Heat output Watts Btu/hr t50 is the UK s industry stard for heating outputs, which h an operating temperature of 75/5/0 C if you have a low temperature heat source you may wish csider t0 or t30 output (see your installer or system designer). Vertical 0 Δt (5/55/0 C) 30 Δt (55/5/0 C) UIN Heat output Watts Btu/hr UIN Heat output Watts Btu/hr Plane & LoLine EN Certificati Data CETIAT tested in accordance with BS EN Type LoLine Single Double W/m at 75/5/ ncoefficients Heated Surface Area (m²/m) Weight (kg/m) Water ctents (l/m) Wall tap centre () Vertical EN Certificati Data CETIAT tested in accordance with BS EN Type Vertical Slimline W/m at 75/5/ ncoefficients Heated Surface Area (m²/m) Weight (kg/m) Water Ctents (l/m) Wall tap centre () 50 50

7 Range Slimline 50 Δt (75/5/0 C) Slimline UIN Heat output Watts Btu/hr t50 is the UK s industry stard for heating outputs, which h an operating temperature of 75/5/0 C if you have a low temperature heat source you may wish csider t0 or t30 output (see your installer or system designer). Slimline 0 Δt (5/55/0 C) 30 Δt (55/5/0 C) UIN Heat output Watts Btu/hr UIN Heat output Watts Btu/hr Slimline EN Certificati Data CETIAT tested in accordance with BS EN Type Vertical Slimline W/m at 75/5/ ncoefficients Heated Surface Area (m²/m) Weight (kg/m) Water Ctents (l/m) Wall tap centre () 50 50

8 Plane Single fixing positis All dimensis in. Inches in brackets. 5 (.5) 1 (5.0) M 0 (.3) 0 (1.57) 5 (1.77) 15 (0.59) (0.0) 70 (.7) 0 (.3) 150 (5.90) M L = 100 L = 0 0 (1.57) H = (.3) 150 (5.90) 150 (5.90) 150 (5.90) 150 (5.90) Plane Double fixing positis All dimensis in. Inches in brackets. 150 (5.90) M 0 (0.79) 1 (.33) 55 (.17) 1 (0.71) L = 100 L = 0 H = (5.90) 150 (5.90) 0 (1.57) 0 (.3) 150 (5.90) 150 (5.90)

9 LoLine fixing positis All dimensis in. Inches in brackets. 1 (5.90) M 0 (0.79) 1 (.33) 55 (.17) 1 (0.71) L = L = 000 L = 0000 H = (.3) H = (5.90) 150 (5.90) 0 (1.57) 0 (.3) *Welded foot supports recoended 150 (5.90) 150 (5.90) 0 (1.57) 150 (5.90) 150 (5.90) LoLine 1 h unique brackets. Vertical fixing positis All dimensis in. Inches in brackets. 7 (.1) 7 (.1) 7 (.1) 115 (.53) H = (.53) 0 (0.79) 1 (0.71) 115 (.53) 55 (.17) Hardw pack includes air vents, saddle clips & bring clips. Slimline fixing positis All dimensis in. Inches in brackets. (1.73)

10 Plane Single, Plane Double, LoLine Vertical wall mounting informati All dimensis in. Inches in brackets. 15 (0.59) 7 (1.0) 50 (1.97) (0.39) 7 (1.0) Type Plane Single Plane Double Vertical From back of radiar wall D From wall centre of cnectis D1 From frt of radiar wall D in in in (0.39) LoLine 5 (1.77) 30 (1.1) 5 (1.77) D D 5 (1.77) Slimline wall mounting informati All dimensis in. Inches in brackets. DI D 0 (3.15) DI Type Slimline Back face finished wall D Cnecti centres from finished wall D1 Frt face from finished wall D in in in D 70min (.7) piping optis

11 Plane LoLine floor mounting positis All dimensis in. Inches in brackets. Must be specified at time of ing they securely welded during manufacture. Floor mounting brackets illustrati. 0 (3.9) This is a made product ce ed it can be cancelled. 150 (5.91) 150 (5.91) 70 (.7) 10 (.7)

12 our charts colour c colour cha colour chart colourful inspirati colour char elrad colour colourcharts charts * 0 * Clsic in 017* 1 Meta is is * every interior. Opt for warm elegance, baroque ambience or modern A shade for every room, for inminimalism With, you can heat your in Choose from a full of stylish radiar. 00 home * accurately 5 0 Below for printing process will13 allow * Clsic ly specific products. Colours * * is in * rang * Clsic colo is * 1 017* is in * in 9S * Cls * * * is avail charts elrad colour charts d colour charts colour charts Met 033 colou 00 is 50 7* * accurately 00 in 0 c * Clsic 03 printing process will13 allow * Clsic Cco St * 005inMeta reprod is is availab in av th 019 p ly specific products * olour charts our chart chart accurately a col * Clsic printing process will allow 15 is * 000 accu reprodu is in in in printing proces pri ly specific products * Clsic ar ly speci is * 501 accurately 00 1 in is accura 03 in printing process willprocess allow printing s ly products. isspecific ly specific * Clsic * accurately * ** inin is printing process will allow 019 * rang ly specific products. * 1 Clsic accurately colo * is 000 is in 03 printing process will allow * S in * * ly specific products. * colou * is Clsic is noc Metallic Colours 000 accurately * 019 in St radiars in white ( 901) stard, however * * identified 1 reprod 90 printing process will allow the specific radiars now in a variety of. is availab av Plee e that ce ed, coloured radiars can be cancelled. p Clsic * Colu accurately process will * 501 products. in a allow can be made specific the identified ly products. is col 000 accurately availab * Clsic G Silver 000 *** reprodu *Excel black will **Stard white ***Colour for Arc, Wave Optia printing process allow is in in thi 005 prin s ran ly specific products. 000 Plee e: When a coloured radiar or radiars over metres have been ed they can be cancelled or ar a col in returned. All colour radiars have1 a week lead time. is 90 accura printing 50 0 To request a colour chart details of how plee marketing@stelrad.com in printing process 0 availa ly s accurately * Clsic * Clsic ly specific 1 printing process accurately will a is in