Betacom c 24 and 30kW Combination Boilers

Transcription

1 Betacom c 24 and 30kW ombination Boilers

2 Betacom c 24 30kW Betacom c - ombination Boilers The new Glow-worm Betacom c range of high efficiency combi boilers is simple, affordable and reliable. This stylishly designed appliance is easy to install and operate. It is one of the smallest SBU B combis on the market and is the ideal heating solution for small to medium sized homes with multiple flueing options and telescopic flue as standard, which simplifies installation and removes the need to cut to length. It is available in outputs of 24kW and 30kW and features an in-built analogue timer and in-built frost protection. The Betacom c is fully compatible with the Glow-worm lume Management it, ondensate ump and all volt free controls. It is ompact and stylish appliance SBU B asy to use and install User-friendly display In-built timer actory fitted mains connection lead rost protection ump & diverter anti-seize function Horizontal, vertical & twin flue options Superb value for money ull service back up of an experienced and leading manufacturer with 250 engineers on the road supported by our nationwide service organisation providing installer and end-user support 7 days a week, 364 days a year throughout the installation and life of the appliance.

3 imensions & learances 330mm 170mm 20mm* 20mm* 76mm 100mm 600mm 720mm 200mm 20mm* 50mm 50mm 405mm (24c) 430mm (30c) The boiler must be installed by a competent person in accordance with the rules in force in the United ingdom. The Betacom 24c & 30c high efficiency condensing combi boilers have been designed for use on a sealed system only. The boilers come complete with pump and expansion vessel and safety discharge valve. 300mm * including combustible material a removable compartment door can be placed at least 5mm in front of the appliance o secondary domestic hot water storage is needed Together with your room thermostat and thermostatic radiator valves (not supplied by Glow-worm) fully automatic control can be achieved Visit to view and download technical data lue Options - Betacom 24c lue Options - Betacom 30c 5.6m 6.8m 14.3m 2m 4.6m 5.8m 11.9m 2m Horizontal lue Vertical lue Twin lue ompatible with lume Management it Horizontal lue Vertical lue Twin lue ompatible with lume Management it roduct Specifications onstruction erformance Size ppearance roduct Range Betacom c Betacom c Type ombi ombi 24c 30c asing dimensions (h w d)(mm) 720 x 405 x x 430 x 330 Weight (lift) (kg) H output (kw) Min/ 10.2 / / 27.6 HW output (kw) Min/ 10.2 / / 27.6 H condensing output (kw) HW flow rate (l/min, 35 rise) SBU rating B B SBU % Ox class (natural gas) 1 1 Main heat exchange type Tube & fin Tube & fin Heat exchanger material opper opper Burner type Multi-bladed Multi-bladed ully modulating Yes Yes HW plate heat exchanger Yes Yes Integrated hydrobloc o o User interface learances Installation roduct Range Betacom c Betacom c Type ombi ombi 24c 30c Sealed system Yes Yes Suitable for open-vent systems o o low restrictor Yes 8 I/min Yes 10 I/min Inbuilt system bypass o o Inbuilt condensate trap/siphon Trap Trap Inbuilt boiler frost protection Yes Yes Zero compartment ventilation o o Top (mm) (from top of boiler) Side (mm) Bottom (mm) ront (mm)* User display iagnostics User adjustable HW temp control Yes Yes Optional rogrammer Built-in Built-in ipes Water connections 2 x 22mm, 2 x 15mm 2 x 22mm, 2 x 15mm horizontal 5.6m 4.6m lues vertical 6.8m 5.8m twin flue (total air + flue) 14.3m 11.9m Optional lume Management it 2m 2m * This can be reduced to 5mm for a removable panel

4 lueing Options & ccessories Horizontal lue Options: Top Rear X Z = lue length, measured from outside wall face to centre line of flue outlet. If is less than 589mm then with xtensions 24c 5.6 Min X (mm) Z (mm) Horizontal Telescopic lue only the horizontal flue is required If is greater than 589mm then 30c 4.6 extensions are required. If is less than 384mm then use horizontal top flue , which can be cut to suit a minimum wall thickness of Horizontal lue ccessories B 75mm. X = wall thickness. Z = distance from centre line of flue outlet to inside wall face. The horizontal flue can be extended up to the maximum flue lengths with extensions but the maximum lengths must not be exceeded (refer to in table to the right). B m xtension or 1m xtension or 2m xtension Vertical lue or each additional 90 or 2 x 45 bends fitted, the maximum flue length must be reduced by 1m. The vertical flue adaptor is required for vertical flue connections to the boiler. Horizontal lue Options: Top Side = lue length, measured from outside wall face to centre line of flue outlet. If is less than 589mm then only the horizontal flue is required. If is greater than 589mm then extensions are required. If is less than 384mm then use horizontal top flue , which can be cut to suit a minimum wall thickness of 75mm. X = wall thickness. 20mm min X Y Z Y = distance from the side of the boiler to the inside wall face Z = distance from centre line of flue outlet to the side of the boiler.

5 lueing Options & ccessories The horizontal flue can be extended up to the maximum flue lengths with extensions but the maximum lengths must not be exceeded (refer to in table below). or each additional 90 or 2 x 45 bends fitted, the maximum flue length must be reduced by 1m. The vertical flue adaptor is required for vertical flue connections to the boiler. with xtensions Min X (mm) Z (mm) Horizontal Telescopic lue c c mm diameter flue components as the horizontal flue options. Vertical lue Options = lue length, measured from the top of the boiler to the underside of The vertical flue adaptor is required for vertical flue connections to the boiler. Horizontal sections must have a continuous fall of at least 2.5 (44mm/metre) back to the boiler. 1040mm the roof flashing. 727mm imum flue length is 3m. The maximum flue length must not be exceeded (refer to in table opposite). or each 90 or 2 x 45 bends fitted the maximum flue length must be reduced by 1m. Vertical flue options use the same with xtensions 24c c 5.8 escription of arts 0.5m xtension or 1m xtension or 2m xtension Vertical lue art umber Vertical lue ccessories H J B m xt m xt m xt G Vertical lue dapter itched Roof lashing H I J lat Roof lashing I B G Sliding Sleeve ixing Bracket (5 off) Telescopic xtension B

6 lueing Options & ccessories Twin lue Options exposed to external air. The flue outlet must be above the 2 = 1+ 2 imum available combined flue length air inlet if mounted vertically. 500mm (1 air inlet and 2 flue outlet), measured from top of boiler (not Horizontal sections must have a 1 2 including terminals) continuous fall of at least 2.5 s 500mm imum flue length is 14.3m or 11.9m (1+ 2) plus terminals. (44mm/metre) back to the boiler. 1 or each 90 or 2 x 45 bends fitted the maximum flue length The minimum distance between must be reduced by 1m. flue and air terminals is 120mm ir inlet and flue outlet terminals must be installed so that they are (between terminal centres). Twin lue Option 3 Twin lue i ii ROT VIW iii i(mm) ii(mm) iii(mm) 24c c c = 1 air + 2 flue ombined lue ength 14.3m escription of arts Twin lue 1m xtension art umber Option = 1 air + 2 flue ombined lue ength escription of arts art umber 30c 11.9m Horizontal Option 2 S O O 24c 30c 14.3m 11.9m = 1 air + 2 flue ombined lue ength Twin lue 1m xtension O S Twin ipe to oncentric escription of arts art umber Twin lue ccessories J G H M O S R G H J Vertical Roof itched Roof lashing lat Roof lashing Ø 100mm ixing Bracket (5 off) M Twin lue m xtension Ø 80mm ixing Bracket (5 off) O R S Horizontal Single ipe Twin ipe to oncentric R 24c 14.3m Twin lue c 11.9m 1m xtension Horizontal R Single ipe ottingham Road, Belper, erbys 56 1JT Tel: (01773) ax: (01773) GWBTIS 05/08