limbsandthings.com Limbs & Things Laparoscopic Skills Trainer USB User Guide Learn more at Product No: 50301
|
|
- Phoebe Baker
- 5 years ago
- Views:
Transcription
1 Limbs & Things Laparoscopic Skills Trainer USB Product No: User Guide Learn more at limbsandthings.com Limbs & Things Ltd. Sussex Street, St Philips Bristol, BS2 0RA, UK +44 (0)
2 Limbs & Things Laparoscopic Skills Trainer USB A brand new, cost effective solution for acquiring the basic skills required for laparoscopic surgery. This trainer box comes with a USB camera, light source and trocars, providing an ideal laparoscopic environment for any basic task which can be added by the user. The Limbs & Things Laparoscopic Skills Trainer comes with a USB Camera, plus LED lighting. The Laparoscopic Skills Trainer Skin Frame is constructed from durable neoprene and uses clips to attach to the frame securely. It has 2 preincised holes for the Trocars. The white acrylic and open ends of the trainer allow for ambient light to enter the training area. Rubber strips provide the Limbs & Things Laparoscopic Trainer Box with a sturdy platform for training.
3 Components: Trainer System Trainer Box Top Trainer Box Base Skin Frame Trocars USB Camera USB Lead 7 8 Power Cable and Adaptors String and Alligator Clips
4 Attaching New Trocars 1 2 Before attaching the frame to the unit, insert the trocars through the holes in the black neoprene Turn the frame upside down and place on a hard surface. Attach the trocar rings so that the trocar is secure Attaching the Frame 1 2 Align the two holes either side of the frame with the black clips on either side of the unit to fit the frame in place Once the frame is in place, twist the black clips to secure
5 Assembling the Trainer Box 1 2 The Trainer will arrive in two halves Ensure the trainer is aligned correctly (power points and alligator clips should be at the front of the trainer) 3 4 Line up the holes on the top half of the model with the connecting points on the rubber sleeve on both sides of the model Gently press the top half of the model down onto the rubber connecting points on both sides. The two halves of the model are now securely fixed
6 Adjusting the Camera (Slider) to Center the Image 1 2 Twist the two black clips and detach the frame from the top of the trainer Locate the single screw that holds the camera in place on the trainer box 3 4 Using a Phillips screwdriver (not included), loosen the screw in order to realign the camera Slide the screw to the preferred position (looking at the monitor to check the camera view)
7 Adjusting the Camera (Slider) to Center the Image (Continued) 5 Ensure that the plastic cap covering the camera lens is removed before use
8 Adjusting the Camera (Slider) to Center the Image (Continued) 6 7 The laptop view can also be adjusted by gently moving the camera unit up or down Check on the laptop that the image is displaying as required 8 9 Once the camera is in the correct position, tighten the screw to hold the camera in place Re-attach the frame to the top of the trainer
9 Connecting a Laptop 1 2 Locate the USB connection point on the side of the Laparoscopic Skills Trainer (next to the power connection point), and plug in the USB cable Plug the USB end of the cable into the USB port in the laptop 3 The laptop is now connected to the Limbs & Things Laparoscopic Skills Trainer
10 Using the USB Camera on a PC To view the camera screen on a laptop you ll need to install a USB Camera viewing program. We recommend using the ECap software. To download the software visit the following website: 1 Select here for Windows XP, 2000 or Vista Select here for Windows 7, 8 or On the next screen click the download button Once downloaded find the file in your downloads, right click it and select extract all
11 Using the USB Camera on a PC (Continued) 4 5 Select the location you want to save the file to and click extract Once extracted you can click the ECap.exe icon to run the camera program
12 Using the USB Camera on a PC (Continued) To use the ECap USB Camera software, first make sure your camera is plugged into your USB Port and the lens cap has been taken off the camera, then click the Ecap icon from your laptop. 1 2 The program should load up and display the camera view inside the Trainer Click the red triangle button to start recording. When recording the screen view will revert to a smaller size. You can resize the window by clicking and dragging the corners of the window outwards 3 Click the grey X to stop recording. The video will be stored in the videos folder on the laptop
13 Using the USB Camera on a Mac To use the USB Camera on a Mac, you ll need to use QuickTime Player. 1 Click on Applications, locate QuickTime Player and click on the icon 2 In the top left corner of the screen, click on File and select New Movie Recording
14 Using the USB Camera on a Mac (Continued) 3 The image from the camera should display 4 Click on the down arrow, and ensure that USB 2.0 Camera is selected. Also make sure that under the Quality listing, Maximum is selected
15 Using the USB Camera on a Mac (Continued) 5 Click Record to record video 6 Select File on the top left of the screen and click Save to save the video
16 Optional Consumables & Instruments Limbs & Things Laparoscopic Trainer is compatible with all FLS consumables and instruments. Visit for more information. Peg Transfer Precision Cutting Peg Board & 6 Triangles Triangles for Peg Board (x6) Jumbo Clip Retainer Gauze Pads with Single Circle (x100) Gauze Pads with Double Circle (x100) Ligating Loop Knot Tying Foam Organs (x15) Single-Use Ligating Loop (x3) Multi-Use Ligating Loop (x5) Suture Block Penrose Drains (x100) Suture 2/0 Silk 90cm, 26mm Needle (x50) Suture 2/0 Silk 90cm, 26mm Needle (x25) Instruments FLS Approved Instrument Kit (8 Pieces) u Pair of Maryland Dissectors u Graspers (Locking) u Endoscissors u Right Needle Driver u Left Needle Driver u Knot Pushers: - 1 Open Ended - 1 Closed Ended Part No: Issue 3, September Limbs & Things
For more skills training products visit. limbsandthings.com
USER GUIDE LIMBS & THINGS LAPAROSCOPIC SKILLS TRAINER USB 50301 For more skills training products visit limbsandthings.com Sussex Street, St Philips, Bristol, BS 0RA, UK sales@limbsandthings.com +44 (0)
More informationlimbsandthings.com VALS Veterinary Assessment of Laparoscopic Skills User Guide TV USB Learn More at
User Guide VALS Veterinary Assessment of Laparoscopic Skills 50307 50308 TV USB Learn More at limbsandthings.com Limbs & Things Inc. P.O. Box 5669, Savannah, GA 346, USA VALS Laparoscopic Skills Trainer
More informationfls-products.com User Guide Fundamentals of Laparoscopic Surgery Trainer System & Accessories Learn More at
User Guide Fundamentals of Laparoscopic Surgery Trainer System & Accessories Learn More at fls-products.com Limbs & Things Inc. P.O. Box 5669, Savannah, GA 346, USA Fundamentals of Laparoscopic Surgery
More informationfls-products.com User Guide: Fundamentals of Laparoscopic Surgery Trainer System & Accessories Learn More at
User Guide: Fundamentals of Laparoscopic Surgery Trainer System & Accessories Learn More at fls-products.com Limbs & Things Inc. P.O. Box 5669, Savannah, GA 46, USA Fundamentals of Laparoscopic Surgery
More informationfls-products.com User Guide: Fundamentals of Laparoscopic Surgery Trainer System & Accessories Learn More at
User Guide: Fundamentals of Laparoscopic Surgery Trainer System & Accessories Learn More at fls-products.com Limbs & Things Inc. P.O. Box 5669, Savannah, GA 346, USA Fundamentals of Laparoscopic Surgery
More informationINTERNATIONAL FLS TEST CENTER APPLICATION For applicants outside the U.S. and Canada
Instructions: This application is to be completed by the designated FLS Champion except where noted. Please study the International FLS Test Center Standards and Criteria prior to completing this application.
More informationSkullcandy Air Raid USB Board Replacement
Skullcandy Air Raid USB Board Replacement The USB port should be replaced if it is visibly broken or the device will no longer charge. Written By: Cyrene ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12
More informationOlympus Stylus 1030 SW Camera Lens Replacement
Olympus Stylus 1030 SW Camera Lens Replacement Written By: Shanmei Zheng ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 TOOLS: Phillips #00 Screwdriver (1) ifixit Opening Tools (1) Spudger (1) T6 Torx
More informationView Wall Interface. Dynamic Glass INSTALLATION GUIDE. Description. System Requirements. Installation Overview
Description The solution is a compact, wall-mounted interface used for monitoring and changing the tint levels of View Dynamic Glass. The product leverages 802.11-based Wi-Fi technology for connectivity
More informationHow to add a Second Drive to a Mac mini (2012) using the OWC Data Doubler SSD/2.5 Installation Kit
Instructional Video Series How to add a Second Drive to a Mac mini (2012) using the OWC Data Doubler SSD/2.5 Installation Kit Skill Level: Challenging Time to Complete: Approximately 45 Minutes Required
More informationDell Inspiron 1521 Display Assembly
Dell Inspiron 1521 Display Assembly Replacement The display assembly houses the LCD. This guide requires removal of the battery and keyboard, and the detaching some wires. Care must be taken not to damage
More informationToshiba Satellite A105-S4011 Touchpad
Toshiba Satellite A105-S4011 Touchpad Replacement This guide will instruct you on how to remove the current touchpad from this laptop and how to reinstall another. This is a straightforward process and
More informationWritten By: Shanmei Zheng
Olympus Stylus 1030 SW LCD Replacement Written By: Shanmei Zheng ifixit CC BY-NC-SA www.ifixit.com Page 1 of 10 TOOLS: T6 Torx Screwdriver (1) Phillips #00 Screwdriver (1) Spudger (1) ifixit Opening Tools
More informationToshiba Satellite L305-S5946 Power Jack Replacement
Toshiba Satellite L305-S5946 Power Jack Replacement Replace the power jack in your Toshiba Satellite L305-S5946. Written By: Michael Erberich ifixit CC BY-NC-SA www.ifixit.com Page 1 of 16 INTRODUCTION
More informationDaNI Robot Camera. User Guide V0512
DaNI Robot Camera User Guide 60018 V0512 Materials Included Camera (includes hardware that will not be used) Modem (with power supply that will not be used) Power converter 6" Velcro strip Adhesive tab
More informationIf you are missing any of the following items, please contact Stanton Video immediately (602)
RIGHT ANGLE FOCUS Jan 03 If you are missing any of the following items, please contact Stanton Video immediately (602) 493-9505 1. Right Angle Focus Servo 2. Servo End Cap 3. Lens Gears (32 pitch, 48 pitch,.6
More informationUpgrade Instructions. P/N Revision A. October Printer Terminal Holder * *
Upgrade Instructions P/N 96-08-0 Revision A October 000 480 Printer Terminal Holder P/N 96-08-0 Revision A *96080* Instructions This terminal holder connects the INTERMEC R 600 Series and 700 Series Computers
More informationCanon Powershot S200 Camera lens Replacement
Canon Powershot S200 Camera lens Replacement This guide will walk you through the process of removing the camera's lens for replacement. Written By: Joseph Melo Page 1 of 16 INTRODUCTION The lens is used
More informationDell Inspiron 1525 Upper Case Replacement
Dell Inspiron 1525 Upper Case Replacement Replace the upper case on a Dell Inspiron 1525. Written By: Miroslav Djuric ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION Use this guide to help
More informationGateway Profile 4 service guide
Gateway Profile 4 service guide Customizing Troubleshooting Contents Replacing Components in Your Gateway Profile 4.................. 1 About this guide.....................................................
More informationAssembly Instructions for #5630 Medication PalWOW
Assembly Instructions for #5630 Medication PalWOW Before assembling, please familiarize yourself with all the parts and check to make sure you have all the parts as listed below. A B A & B - The box in
More informationJBL Flip 2 Battery Replacement
JBL Flip 2 Battery Replacement This guide will walk you through replacing the battery for this device. Written By: Jonathan Wear ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION This guide will
More informationOlympus Stylus Tough TG-2 ihs Lens Assembly Replacement
Olympus Stylus Tough TG-2 ihs Lens Assembly Replacement This guide will illustrate how to access and remove the lens box. Written By: Amanda ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION
More informationMotorola Droid X Camera Replacement
Motorola Droid X Camera Replacement Written By: Gage ifixit CC BY-NC-SA www.ifixit.com Page 1 of 24 TOOLS: 64 Bit Driver Kit (1) ifixit Opening Tools (1) ifixit CC BY-NC-SA www.ifixit.com Page 2 of 24
More informationWritten By: Patrick. Disassembly to clean dust from the fan and heat sink. HP Pavilion G6 disassembly for cleaning
HP Pavilion G6 disassembly for cleaning Disassembly to clean dust from the fan and heat sink. Written By: Patrick ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION Disassembly to clean dust from
More informationDualShock 4 Analog Stick Covers Replacement
DualShock 4 Analog Stick Covers Replacement Replace analog stick covers on the Dualshock 4 controller. Written By: Maaz Hussaini ifixit CC BY-NC-SA www.ifixit.com Page 1 of 9 INTRODUCTION Use this guide
More informationFigure 4-29 Removing the CPU compartment cover
4 Replacement Procedures 4.9 CPU 4 4.9 CPU Removing the CPU To remove the CPU, follow the steps below. 1. Turn the computer upside down and remove two M2.5 4 security screws securing the CPU compartment
More informationRemoving and Replacing Parts
Removing and Replacing Parts Preparing to Work Inside the Computer Recommended Tools Screw Identification System Components Hard Drive Fixed Optical Drive Media Bay Devices Memory Modules Mini PCI Card
More informationUnpacking and Installing the Flora 2512 UV Printer. Steps 1: Unscrew the 10mm bolts holding the top. Then remove the top and put in a safe place.
Unpacking and Installing the Flora 2512 UV Printer Steps 1: Unscrew the 10mm bolts holding the top. Then remove the top and put in a safe place. Step 2: Unscrew 10mm bolts holding the end panels. On the
More informationRemanufacturing the Lexmark W812 Toner Cartridges
Publications Dealer Catalog #23 Catalog Update Chips Comprehensive Chip List Lexmark Chip Cross Reference Reset Box Information Samsung Reset Box Compatibility MasterSet USB Installation Software MasterSet
More informationTechnical Communications Bulletin TCB
Technical Communications Bulletin Date: June 5, 2018 ECRN 2018-0392 Rev A Priority Status: P1: Needs completed at your earliest opportunity P2: Needs completed at the next service X P3: Product improvement
More informationWritten By: Wei Xia. This guide will teach you how to replace the power button. OLPC XO-1.5 Power Button Replacement
OLPC XO-1.5 Power Button Replacement This guide will teach you how to replace the power button. Written By: Wei Xia ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION If your OLPC does not turn
More informationCIB 3047 (14B) 10-Button Voice Terminal Fixed Desk Stand and Wall Mount (32007)
CIB 3047 (14B) 10-Button Voice Terminal Fixed Desk Stand and Wall Mount (32007) CIB 3047 Comcode 845-659-325 Issue 1 CIB 3047 (14B) 10-Button Voice Terminal Fixed Desk Stand and Wall Mount (32007) This
More informationWritten By: Jonathan Wear
JBL Flip 2 MicroUSB Port Replacement This guide will walk you through replacing the microusb port for this device. Written By: Jonathan Wear ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION
More informationTo connect the AC adapter:
Replacing the AC Adapter Replacing the AC Adapter 3 Plug the power cord into a wall outlet. The power indicator turns on. To connect the AC adapter: Connect the power cord to the AC adapter. Power indicator
More informationDualShock 4 Touch Pad Replacement. Remove the touchpad on the Dualshock 4 controller. Rédigé par: Mark. ifixit CC BY-NC-SA fr.ifixit.
DualShock 4 Touch Pad Replacement Remove the touchpad on the Dualshock 4 controller. Rédigé par: Mark ifixit CC BY-NC-SA fr.ifixit.com Page 1 de 9 INTRODUCTION Use this guide to remove a defective touchpad
More informationMacBook Pro 17" Unibody AirPort Board Replacement
MacBook Pro 17" Unibody AirPort Board Replacement Replace the AirPort Board in your MacBook Pro 17" Unibody. Written By: Brett Hartt ifixit CC BY-NC-SA www.ifixit.com Page 1 of 15 INTRODUCTION Having issues
More informationDell Inspiron XPS and Inspiron 9100 Service Manual
Dell Inspiron XPS and Inspiron 9100 Service Manual Dell Inspiron XPS and Inspiron 9100 Service Manual Before You Begin Memory Module, Mini PCI Card, and Devices System Components Subwoofer Bluetooth Card
More informationAdvice for How To Create a Film Project in Windows MovieMaker
Advice for How To Create a Film Project in Windows MovieMaker This document was compiled to provide initial assistance to teachers and/or students to create a movie project using the Windows MovieMaker
More informationHOW TO INSTALL NEST BOX CAMERAS IN SCHWEGLER NO. 17 SWIFT NEST BOXES
HOW TO INSTALL NEST BOX CAMERAS IN SCHWEGLER NO. 17 SWIFT NEST BOXES By Lynda and Chris Huxley natureofireland@eircom.net January 2015 1. The nest box cameras are colour in daylight, plus infrared in darkness
More informationMCH WIRE HARNESS WITH QUICK DISCONNECT REPLACEMENT Initial Release 1/31/2013
1. Table of Contents 1. Table of Contents Page 1 2. Remove Failed MCH-103.2 Page 1 3. Install MCH-103.2 to MCH-102NW Page 2 4. Install NC3FX-HD to MCH-103.2 Page 3 5. Install MCH-103.2 Battery Terminal
More informationFIELD REPLACEABLE UNIT DOCUMENTATION. Satellite TM. A20 Series GENERAL INFORMATION. Tools Required for Proper Disassembly and Reassembly:
GENERAL INFORMATION Tools Required for Proper Disassembly and Reassembly: 1. Phillips Screwdriver (Size 0&1) 2. 4mm Flat head Screwdriver 3. Case Separator 4. ESD Wrist Strap 5. ESD mats 6. Tweezers Before
More informationMacBook Pro 13" Unibody Mid 2010 SSD Dual Drive Installation
MacBook Pro 13" Unibody Mid 2010 SSD Dual Drive Installation Use this guide to install a second SSD in place of the optical drive. Written By: Dozuki System 2017 guides.crucial.com Page 1 of 13 INTRODUCTION
More informationS Series Stand Assembly Instructions
S Series Stand Assembly Instructions Contents Stand Base Column Transducer holder Magnetic screwdriver, Allen bit & Phillips bit Grommets (4) Allen wrench 8mm Phillips-head screws (4) 12mm Allen-head screws
More informationDV5-2. SC-DV5_Main.jpg. SC-DV5_Main.jpg. SC-DV5_Main.jpg
DV5-2 SC-DV5_Main.jpg SC-DV5_Main.jpg SC-DV5_Main.jpg Overview Camera: Overview -screen Display: The DV5-2 body camera is an advanced recording system with many options and features available. Please review
More informationWEASEL N/B MAINTENANCE
2. System Assembly & Disassembly 2.1 System View 2.1.1 Front View ❶ Microphone Connector ❷ Audio Input Connector ❸ Audio Output Connector ❹ Top Cover Latch ❹ ❶ ❸ ❷ 2.1.2 Left-Side View ❶ VGA Port ❷ S-Video
More informationNov. 07, 2013 p. 5 - changed the B axis unit value to from Changed by Randy per Frank s request.
Correction notes Nov. 07, 2013 p. 5 - changed the B axis unit value to 45.1389 from 40.0000. Changed by Randy per Frank s request. Jan. 22, 2018 p. 5 - changed the B axis unit value and corresponding picture
More informationMotorola Atrix 4G Bottom Speaker
Motorola Atrix 4G Bottom Speaker Replacement This guide will show you how to access the Motorola Atrix 4Gs bottom speaker for repair or replacement. Written By: Jake ifixit CC BY-NC-SA www.ifixit.com Page
More informationWritten By: Allie Menard
Written By: Allie Menard ifixit CC BY-NC-SA www.ifixit.com Page 1 of 20 TOOLS: Paper Clip (1) Phillips #00 Screwdriver (1) Phillips #1 Screwdriver (1) Spudger (1) Tweezers (1) ifixit CC BY-NC-SA www.ifixit.com
More informationInspiron Service Manual. 2-in-1. Computer Model: Inspiron Regulatory Model: P69G Regulatory Type: P69G001
Inspiron 13 5000 2-in-1 Service Manual Computer Model: Inspiron 13-5378 Regulatory Model: P69G Regulatory Type: P69G001 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps
More informationkena TM Instruction Manual T-1050
kena TM Instruction Manual T-1050 2 Table of Contents Introduction / Package Contents 4 Diagram 4 Package Contents 5 Operational Requirements 5 Optional Accessories to Order 5 Specifications 6 Quick Start
More informationInstructions to Install Retrofit Kit 6/7000 Machine
Instructions to Install Retrofit Kit 6/7000 Machine **TURN POWER OFF OF MACHINE BEFORE INSTALLATION** READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION Retrofit kit contents: PART NAME QUANTITY PART NUMBER
More information2 x Dynamic Arms on 135 Post with C-Clamp
Installation Guide AWMS-2-D13-C 2 x Dynamic Arms on 135 Post with C-Clamp COMPONENT CHECKLIST RANGE A AWM-LC Post Clamp B AWM-AD Dynamic Arm (x2) C AWM-P13 135 Post D AWM-FC C-Clamp CONTENTS C-Clamp Page
More informationRACKMOUNT CONSOLE KVM SWITCH QUICK INSTALLATION GUIDE
RACKMOUNT CONSOLE KVM SWITCH QUICK INSTALLATION GUIDE MODELS 521796, 521871, 523561 & 523578 INT-521796/521871/523561/523578-QIG-0307-01 INTRODUCTION Thank you for purchasing the INTELLINET NETWORK SOLUTIONS
More informationASSEMBLY AND ADJUSTMENT
EDGE-WALL MONITOR ARM EDGE-WALL Rev A 2/17 Model EDGE-WALL-SLV ASSEMBLY AND ADJUSTMENT EDGE-WALL MONITOR ARM PLEASE REVIEW these instructions before beginning the installation. Check that all parts and
More informationSamsung Galaxy S5 Rear Facing Camera
Samsung Galaxy S5 Rear Facing Camera Replacement Replace the Rear-Facing Camera in your Samsung Galaxy S5. Written By: Sam Lionheart ifixit CC BY-NC-SA www.ifixit.com Page 1 of 19 INTRODUCTION Use this
More information300 Series Mini Bullet IP-Enabled HD Surveillance Camera. Installation Manual. Important! Ensure your NVR has the latest firmware!
300 Series Mini Bullet IP-Enabled HD Surveillance Camera Installation Manual Important! Ensure your NVR has the latest firmware! Read this before you go on site! For maximum control and convenience, install
More informationHP Envy TouchSmart m7 k010dx Screen
HP Envy TouchSmart m7 k010dx Screen Replacement Use this guide to replace the screen in your HP Envy TouchSmart m7 k010dx. Written By: Owen Ou ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION
More informationPi PoE Switch HAT Quick Start And FAQ. Getting started. Kit contents
Pi PoE Switch HAT Quick Start And FAQ Getting started The Pi PoE Switch HAT is an add on board for the Raspberry Pi that brings the Switch technology together with PoE all in one fantastic package! You
More informationDualShock 4 Touch Pad Replacement. Remove the touchpad on the Dualshock 4 controller. Scritto Da: Mark. ifixit CC BY-NC-SA it.ifixit.
DualShock 4 Touch Pad Replacement Remove the touchpad on the Dualshock 4 controller. Scritto Da: Mark ifixit CC BY-NC-SA it.ifixit.com Pagina 1 di 9 INTRODUZIONE Use this guide to remove a defective touchpad
More informationitech Training Courses iphone 5S LCD Assembly Replacement Guide
itech Training Courses iphone 5S LCD Assembly Replacement Guide 2014 icracked, Inc. All rights reserved. ios, all Apple product names, and Apple logos are trademark property of Apple, Inc. The content
More informationHP Compaq 6730b Display Replacement
Here is a HP Compaq 6730b with a cracked LCD after having been dropped. This is a straight forward repair. Written By: oldturkey03 ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION This laptop
More informationLumaRail Free Stand Bed Assist Rail with IntelliBrite LED Night Light
LumaRail Free Stand Bed Assist Rail with IntelliBrite LED Night Light Assembly and Operation Instructions Thank you for investing in this premium Platinum Health product. Please carefully follow the assembly
More informationAcer Iconia Tab A3-A10 Touchscreen
Acer Iconia Tab A3-A10 Touchscreen Replacement You broke the digitizer but the display is still intact? Just simply replace the broken touchscreen!! Written By: Cecil His Mahier ifixit CC BY-NC-SA www.ifixit.com
More informationASSET LGA1366 Top-side Probe
ASSET LGA1366 Top-side Probe (Manual version 1.1) For gaining test access to the debug port of Intel processors that are designed for use in LGA1366 Sockets (Socket B). These include the Intel Core i7
More informationNabi Big Tab HD24 Speakers Replacement
Replacing the speakers in your tablet to get the sound back. Written By: Kevin Garcia ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION The Nabi Big Tab HD 24 has two internal speakers. When
More informationCanon EOS Rebel T2i Top Cover Replacement
Canon EOS Rebel T2i Top Cover Replacement Replacing the top piece of a Canon T2i (550D). In my case, I had a broken hot-shoe, but as most controls on this camera are built into the same part, this repair
More informationHQuad500 Frame Assembly Guide
HQuad500 Frame Assembly Guide V1.0 June 2015 1 What s Included Kit Content Hardware Bag Content 2 HQuad500 Assembly 2.1 Arm & Motor Mount Sub Assembly 2.2 Landing Gear Step 1 2.3 Center Plates Sub Assembly
More informationXbox 360 Motherboard Replacement
Xbox 360 Motherboard Replacement Motherboard replacement. Redigido por: Walter Galan ifixit CC BY-NC-SA pt.ifixit.com Página 1 de 29 INTRODUÇÃO Use this guide to completely strip down your motherboard.
More informationWritten By: Walter Galan
Replace a cracked screen on your iphone 4S. Written By: Walter Galan ifixit CC BY-NC-SA www.ifixit.com Page 1 of 32 INTRODUCTION Use this guide to replace the screen on your iphone 4S. After successfully
More informationCanon PowerShot S500 Flash Assembly Replacement
Canon PowerShot S500 Flash Assembly Replacement Replace the Flash Assembly in your Canon PowerShot S500. Written By: Nathan Balcom ifixit CC BY-NC-SA www.ifixit.com Page 1 of 22 INTRODUCTION This guide
More informationInstalling a Power over Ethernet injector
Installing a Power over Ethernet injector AlphaEclipse StreetSmart and RoadStar signs The instructions in this document explain how to install/replace a Power over Ethernet (PoE) injector in a StreetSmart
More information3 Indoor Dome. Mounting on the Wall with Gang Box (Face Forward) Installation Guide. For Models: D5x / E5x / TCM-3xxx 2014/01/16
3 Indoor Dome Mounting on the Wall with Gang Box (Face Forward) Installation Guide For Models: D5x / E5x / TCM-3xxx 2014/01/16 Table of Contents Installation Procedures... 3 Step 1: Install the Gang Box...
More informationReplacement Keyswitch Assembly
Installation Instructions Replacement Keyswitch Assembly (Catalog No. 2711E-NKSW1) Applicable Terminals Use this replacement keyswitch with PanelView Terminals 2711-KA1, -KC1, -TA1, -TC1, -TA4, -TC4 and
More informationReplacement Instructions
imac G5 Inverter, 20-inch Replacement Instructions Follow the instructions in this document carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note: Online
More informationSamsung Galaxy S5 Micro-USB Port Daughterboard Replacement
Samsung Galaxy S5 Micro-USB Port Daughterboard Replacement Replace the Micro-USB Port daughterboard in your Samsung Galaxy S5. Written By: Sam Lionheart ifixit CC BY-NC-SA www.ifixit.com Page 1 of 21 INTRODUCTION
More informationEPILOG LASER Table Mountain Parkway Golden, Colorado Phone FAX
EPILOG LASER 16371 Table Mountain Parkway Golden, Colorado 80403 Phone 303-277-1188 - FAX 303-277-9669 www.epiloglaser.com Procedure Title: Replacing the Optics in your FiberMark Laser Engraver Tools Needed:
More informationIS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
More informationMaximus Trident to Unlock Macronix
360Lizard.com Maximus Trident to Unlock Macronix VGC Repairs Unlocking a Macronix (Vendor ID: C2) The following tutorial will take you through the process of unlocking a Macronix chipset for Liteo on DG
More informationSAMSUNG ML TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
SAMSUNG ML-3050 3051 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS SAMSUNG ML-3050 TONER CARTRIDGE REMANUFACTURING THE SAMSUNG ML-3050/3051 TONER CARTRIDGES By Mike Josiah and the Technical Staff at UniNet
More informationVector Frame Light Box S-02
Vector Frame Light Box S-02 VF-LB-S-02 Vector Frame TM fabric light boxes feature durable 100mm aluminum extrusion frames, push-fit backlit fabric graphics and LED edge lighting. Single and double-sided
More informationBuffaloLabs WiFi Lantern Assembly guide version 1
BuffaloLabs WiFi Lantern Assembly guide version 1 Needed equipment: Solder iron Solder wire Cutter Wire stripper (optional) Hot glue gun Overview of the components (not including USB cable and box panels)
More informationINSTALLATION INSTRUCTIONS
2015 F-150 8 MyTouch factory display 360º Vision System (Kit # AVMS-3618) DUE TO THE COMPLEXITY OF THIS KIT PROFESSIONAL INSTALLATION IS REQUIRED CALIBRATION KIT IS REQUIRED FOR FINAL PROGRAMMING -Must
More informationLenovo IdeaTab A1000L Audio Jack
Lenovo IdeaTab A1000L Audio Jack Replacement If you are unable to or having difficulty hearing using headphones, chances are you need a new headphone jack. Written By: Lauren Pluim ifixit CC BY-NC-SA www.ifixit.com
More informationVector Frame Light Box R-01
Vector Frame Light Box R-01 VF-LB-R-01 Vector Frame TM fabric light boxes feature durable 100mm aluminum extrusion frames, push-fit backlit fabric graphics and LED edge lighting. Single and double-sided
More informationToshiba Satellite E105-S1602 Front Panel Replacement
Toshiba Satellite E105-S1602 Front Panel Replacement Use this guide to replace/remove the front panel. Prerequisite to removing the front panel for more detailed work. Written By: Ian Washburne INTRODUCTION
More informationFurther Information can be found at
Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of
More informationKRONOS INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS TABLE OF CONTENTS ENCLOSURE AND DONGLE ASSEMBLY 1 LIGHTED ENCLOSURES 2-10 2 SLIM ENCLOSURE 11-17 3 WIRED-ETHERNET DONGLE 18-25 4 REAR-OFFSET MOUNT 26-33 5 SIDE-MOUNT 34-41 6 SURFACE
More informationReflowing Xbox 360 Motherboard
Reflowing Xbox 360 Motherboard Reflow the solder on your Xbox 360's motherboard. Written By: Andrew Bookholt ifixit CC BY-NC-SA www.ifixit.com Page 1 of 31 INTRODUCTION Use this guide to reflow the solder
More informationHow To Install: C4000 EMV Upgrade Kit
How To Install: C4000 EMV Upgrade Kit IMPORTANT: Before proceeding with installation please verify you have the current card reader bezel in the kit. Correct bezel will have a small eject pin hole below
More informationWritten By: Joel groff
Replace the lens of the camera. Written By: Joel groff ifixit CC BY-NC-SA www.ifixit.com Page 1 of 17 INTRODUCTION This guide shows how to replace the Lens of the Canon PowerShot SX 530 HS. TOOLS: Phillips
More informationFortiCam FD40 Mounting Guide
FortiCam FD40 Mounting Guide 1 FORTINET DOCUMENT LIBRARY http://docs.fortinet.com FORTINET VIDEO GUIDE http://video.fortinet.com FORTINET BLOG https://blog.fortinet.com CUSTOMER SERVICE & SUPPORT https://support.fortinet.com
More informationDell Inspiron Mini 10 RAM Replacement
Upgrade or replace RAM to boost speed and performance. Written By: Danielle Jarecki ifixit CC BY-NC-SA www.ifixit.com Page 1 of 12 INTRODUCTION This guide will give step-by-step instructions on how to
More informationX500 EXPANSION UNIT QUICK START GUIDE. Rugged Mobile Computing Solutions
X500 EXPANSION UNIT QUICK START GUIDE Rugged Mobile Computing Solutions 1. Overview Slot 1 Slot 1 Slot 2 Slot 2 PCI Expansion Unit PCI-E Expansion Unit The Expansion Unit provides two PCI or PCI-E slots
More informationDell Latitude C800 Service Manual
Dell Latitude C800 Service Manual Dell Latitude C800 Service Manual Before You Begin Preparing to Work Inside the Computer Recommended Tools Screw Identification Removing and Replacing Parts System Components
More informationInstalling MacBook Pro 17" Unibody Dual Hard Drive
Installing MacBook Pro 17" Unibody Dual Hard Drive Written By: Dozuki System 2017 guides.crucial.com Page 1 of 13 INTRODUCTION There are many benefits to adding a second hard drive to your laptop such
More informationBlackberry Storm 9530 LCD/Touchscreen Replacement
Blackberry Storm 9530 LCD/Touchscreen Replacement If your touchscreen is unresponsive or your LCD is producing bad images then it may need to be replaced. Written By: Kye Miranda ifixit CC BY-NC-SA www.ifixit.com
More informationAirLink GX Series X-Card Installation Guide
This installation is to be performed only by certified Sierra Wireless AirLink distributors. If it is performed by anyone other than the certified AirLink distributor, the terms of the warranty agreement
More informationkena Instruction Manual T-1050
kena Instruction Manual T-1050 2 Table of Contents Introduction / Diagram 4 Package Contents 5 Operational Requirements 5 Optional Accessories to Order 5 Specifications 6 Quick Start Guide 7 1. Install
More informationHTC RE Companion Handheld camera
HTC RE Companion Handheld camera disassemby HTC RE Companion camera disassembly starting point. This will get the camera open with minimal damage, and give you some options to repair. Written By: Mike
More information