T2 B Series. Compact Height Nitrogen Gas Springs
|
|
- Josephine Richard
- 6 years ago
- Views:
Transcription
1 T2 B Series Compact Height Nitrogen Gas Springs ife in excess of 100,000 stroke meters. Cartridge design for easy maintenance. Oil pipe prevents oil leaving the springs in a hosed system and helps maintain the life of the springs. Secondary piston retaining ring offers extra protection. Compact height reduces die costs. APPROVED 97/23/EC
2 Table of Contents Page Product Specifications...2 Service and Repair Kits...2 Ordering Options...2 Mounting T2 Nitrogen Gas Springs...3 T2-750P...4 T2B T2B T2B Product Specifications Pressure Medium... Nitrogen Gas Max. Charging Pressure bar/2175 psi Min. Charging Pressure bar/360 psi Operating Temperature C/ F Force Increase by Temperature...±0.3% per C/±0.009% per F Maximum Piston Rod Velocity... 96m/min / 315 ft/min Recommended Maximum Strokes/Min...~15-40 Maximum Utilized Stroke...100% Inlet Valve Charge Fitting... T Control Panel...CP-N2 G, CP-N2 G OR Repair Kits T2-750P T2B-1500 T2B-3000 T2B-5000 T2SK-750P T2SK-1500 T2SK-3000 T2SK-5000 Contact Hyson Customer Service for Repair Kits and other information on the T gas spring. Ordering Options T2B-5000 X 50 FMW 750 psi Model Stroke Welded Flanges Charge Pressure T2-750P See FMW Max: 150 bar/2175 psi T2B-1500 Dimensional FMCW T2B-3000 Information KW T2B-5000 Charts Note: All T2B gas springs shipped at maximum charge pressure unless otherwise specified. 2
3 Mounting T2 Nitrogen Gas Springs D No Stock Removal Permitted On Bottom Of Gas Spring Body Pocket Depth* T2 nitrogen gas springs should be backed up at all times. T2 * For modular flange assembly SF, the bottom of gas spring & flange are not flush. Refer to flange dimension pages for dimension of gap. Flange Pocket Dimensions Spring Model T2-750P T2B-1500 T2B-3000 T2B-5000 Minimum Diameter D 51 mm/2.00 in. 76 mm/3.00 in. 96 mm/3.78 in. 121 mm/4.76 in. SF Flange Pocket Depth * A FMCW Flange Pocket Depth A FMW Flange Pocket Depth A NOTE: Oversized or undersized pockets can cause insufficient spring backing and can result in flange or spring failure. MW Flange Pocket Flange A Min. 26 mm/1.02 in. Min. / Min. / Min. / Max mm/1.04 in. Max mm/.77 in. Max mm/.77 in. Max mm/.77 in. Min. 26 mm/1.02 in. Min. / Min. / Min. /.75 in Max mm/1.04 in. Max mm/.77 in. Max mm/.77 in. Max mm/.77 in. Min. 26 mm/1.02 in. Min. / Min. / Min. / Max mm/1.04 in. Max mm/1.00 in. Max mm/1.00 in. Max mm/.77 in. Min. 26 mm/1.02 in. Min. / Min. / Min. / Max mm/1.04 in. Max mm/1.00 in. Max mm/1.00 in. Max mm/.77 in. Avoid Side oading Side loading resulting from press or die construction causes increased wear on the bearings, seal and piston rod. >0.2 Provide a Smooth Piston Rod Contact Surface When the piston rod contacts bolt heads or other irregular surfaces, uneven wear patterns develop which may lead to side loading. Kiss blocks should be hardened to Rockwell C 25 minimum. Protect from Fluids Avoid prolonged contact with die lubricants and cleaners. Provide adequate drainage for the gas spring pockets. Rc > 25 Drain Slot 3
4 T2-750P For maintenance only, M8 Ø S 3 mm.12 in. T2 3.9 mm.15 in. SAE-4 Straight Thread Port 11.5 mm.45 in mm 1.25 in. M10 x 1.5* Depth 12.7 mm.50 in. Ø 50.2 mm 1 *Metric standard. 3/8"-16 English threads available as special order. Contact Hyson Products Customer Service. NOTE: The T2-750P has the same external dimensions as the earlier version, the T The T2-750P uses a different seal kit (T2SK-750P) because of internal changes. T2-750P Dimensional Information Order Stroke ength Contact Force Full Stroke Force D E Number mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. T2-750PX ,432 2, T2-750PX ,284 2, T2-750PX ,284 2, T2-750PX ,210 2, T2-750PX ,580 2, T2-750PX ,580 2, T2-750PX ,432 2, T2-750PX ,432 2, T2-750PX ,432 2, T2-750PX ,358 2, T2-750PX ,358 2, T2-750PX ,358 2, T2-750PX ,358 2, T2-750PX ,284 2, T2-750PX psi 12,284 2, T2-750PX ,284 2, T2-750PX ,284 2, T2-750PX ,284 2, T2-750PX ,284 2, T2-750PX ,284 2, T2-750PX ,284 2, T2-750PX ,284 2, T2-750PX ,284 2, T2-750PX ,210 2, T2-750PX ,210 2, T2-750PX ,210 2, T2-750PX ,210 2, T2-750PX ,210 2, NOTE: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary. 4
5 T2-750P FC - Circular Flange Part No.: T2-750-FC FCS - Upper Square Flange Part No.: T2-750-FCS SF - Square Mount Part No.: T2-750-SF D E 24 mm 0.94 in. 0 SF1 SF 24 mm Ø 9 mm.94 in..35 in Body Ø mm/2.76 in mm/2.22 in. *.635 mm.025 in mm 3.00 in mm 2.12 in mm 2.22 in. 80 mm 3.15 in. 95 mm 3.74 in. 9 mm 0.35 in. Ø 80 mm 3.15 in mm 3.0 in. M10 S.H.C.S. 3/8 S.H.C.S. * Approximate value 53.9 mm 2.12 in. Ø 11.0 mm 16.0 mm.63 in. FMCW - Three Hole Mount mm 4.25 in mm 3.50 in mm 1 FM1 FM2 M10 S.H.C.S. 3/8 S.H.C.S. FMW - Four Hole Mount FM mm 2.48 in. 63 mm 2.48 in. 116 mm 4.57 in. M2 M 32 mm 1.26 in. MW - ug Mount M1 116 mm 4.57 in. 89 mm 3.50 in. M10 S.H.C.S. 3/8 S.H.C.S. SM - Cam Mount - Part No.: T2-750-SM SMG - Cam Mount - Part No.: T2-750-SMG 38 mm 1.5 in mm 1.37 in. 60 mm 2.36 in. 22 mm.87 in mm +.87 in mm 3.25 in mm -.54 in. Ø 68 mm 2.68 in. 22 mm.87 in. 60 mm 2.36 in. 42 mm 1.65 in mm 2.55 in mm 1.25 in mm 2.50 in. 60 mm 2.36 in mm.50 in. 6.5 mm.24 in mm.50 in. 6.4 mm.25 in. NOTE: All flanges, except welded, are ordered separately. 5
6 T2B-1500 For maintenance only, M8 Ø 36 mm 1.42 in. S 3 mm.12 in. T mm 1.50 in. 3.9 mm.15 in. SAE-4 Straight Thread Port 11.5 mm.45 in mm 2.12 in. M12 x 1.75* Depth 12.7 mm.50 in. Ø 75.2 mm 2.96 in. *Metric standard. 1/2"-13 English threads available as special order. Contact Hyson Products Customer Service. T2B-1500 Dimensional Information Order Stroke ength Contact Force Full Stroke Force D E Number mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. T2B-1500X ,338 5, T2B-1500X ,491 5, T2B-1500X ,491 5, T2B-1500X ,491 5, T2B-1500X ,644 5, T2B-1500X ,644 5, T2B-1500X ,644 5, T2B-1500X ,644 5, T2B-1500X ,644 5, T2B-1500X ,644 5, T2B-1500X ,644 5, T2B-1500X ,256 5, T2B-1500X ,256 5, T2B-1500X ,103 5, T2B-1500X , ,103 5, T2B-1500X psi 23,103 5, T2B-1500X ,103 5, T2B-1500X ,103 5, T2B-1500X ,103 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, T2B-1500X ,950 5, NOTE: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary. 6
7 T2B-1500 FC - Circular Flange Part No.: T FC FCS - Upper Square Flange Part No.: T FCS SF - Square Mount Part No.: T SF D E Ø 16 mm.63 in. 29 mm 1.14 in Body Ø mm 1.14 in. 16 mm 0.63 in. 90 mm/3.54 in mm/2.89 in. SF1 *.635 mm.025 in. SF mm 4.00 in mm 3.00 in mm 3.00 in mm 4.00 in mm 2.89 in. 104 mm 4.09 in. 122 mm 4.80 in. 0 Ø 104 mm 4.09 in. *Approximate value Ø 14.0 mm.55 in mm 1.10 in. FMCW - Three Hole Mount mm 6.00 in mm 4.74 in mm 2.37 in. FM1 FM2 FMW - Four Hole Mount FM mm 3.35 in. 152 mm 5 SM - Side Mount Part No.: T SM 85 mm 3.35 in. M2 M 38 mm 1.50 in. M1 MW - ug Mount 152 mm mm 4.75 in 14 mm.55 in mm 28 mm in in. 14 mm.55 in. Ø 13.5 mm.53 in mm 2.22 in mm 3.92 in. 32 mm 1.26 in. 86 mm 3.39 in. 57 mm 2.24 in mm 6.5 mm.50 in..26 in. 86 mm 3.39 in. NOTE: All flanges, except welded, are ordered separately. 7
8 T2B-3000 For maintenance only, M8 Ø 50 mm 1.97 in. S 3 mm.12 in. T2 3.9 mm.15 in. SAE-4 Straight Thread Port 11.5 mm.45 in mm 2.12 in mm 3.00 in. M12 x 1.75* Depth 12.7 mm.50 in. Ø 95.2 mm 3 *Metric standard. 1/2"-13 English threads available as special order. Contact Hyson Products Customer Service. T2B-3000 Dimensional Information Order Stroke ength Contact Force Full Stroke Force D E Number mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. T2B-3000X ,135 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,610 10, T2B-3000X ,200 10, T2B-3000X ,200 10, T2B-3000X ,200 10, , T2B-3000X ,200 10, psi T2B-3000X ,200 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,905 10, T2B-3000X ,200 10, T2B-3000X ,200 10, NOTE: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary. 8
9 T2B-3000 FC - Circular Flange Part No.: T FC FCS - Upper Square Flange Part No.: T FCS SF - Square Mount Part No.: T SF D E Ø 13.5 mm.53 in. 18 mm.71 in. 33 mm 1.30 in Body Ø mm 1.30 in. 18 mm 0.71 in. 110 mm/4.33 in. 92 mm/3.62 in. SF1 *.635 mm.025 in. SF 127 mm 5.00 in mm 3.87 in mm 3.87 in. 127 mm 5.00 in. 92 mm 3.62 in. 130 mm 5.12 in. 150 mm 5.91 in mm 0.53 in. Ø 130 mm 5.12 in. *Approximate value FMCW - Three Hole Mount FMW - Four Hole Mount MW - ug Mount FM1 Ø 14.0 mm.55 in mm 1.61 in mm 6.73 in mm mm 2.76 in. FM2 FM mm 3.90 in. 172 mm 6.77 in. SM - Side Mount Part No.: T SM 99 mm 3.90 in. M2 M 38 mm 1.50 in. M1 178 mm 7.01 in. 146 mm 5 14 mm.55 in mm 28 mm in in. 14 mm.55 in. Ø 13.5 mm.53 in mm 2.62 in mm 4.78 in. 42 mm 1.65 in. 110 mm 4.33 in. 76 mm 2.99 in mm 6.5 mm.50 in..26 in. 110 mm 4.33 in. NOTE: All flanges, except welded, are ordered separately. 9
10 T2B-5000 For maintenance only, M8 Ø 65 mm 2.56 in. S 3.9 mm.15 in. 3 mm.12 in. T mm 2.25 in. Ø mm 4.73 in. SAE-4 Straight Thread Port 11.5 mm.45 in mm 3.18 in. M12 x 1.75* Depth 12.7 mm.50 in. *Metric standard. 1/2"-13 English threads available as special order. Contact Hyson Products Customer Service. T2B-5000 Dimensional Information Order Stroke ength Contact Force Full Stroke Force D E Number mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. T2B-5000X ,672 18, T2B-5000X ,174 18, T2B-5000X ,174 18, T2B-5000X ,174 18, T2B-5000X ,174 18, T2B-5000X ,174 18, T2B-5000X ,174 18, T2B-5000X ,668 18, T2B-5000X ,668 18, T2B-5000X ,668 18, T2B-5000X ,668 18, T2B-5000X ,668 18, T2B-5000X ,668 18, T2B-5000X ,800 11,200 82,170 18, T2B-5000X psi 82,170 18, T2B-5000X ,170 18, T2B-5000X ,170 18, T2B-5000X ,170 18, T2B-5000X ,170 18, T2B-5000X ,170 18, T2B-5000X ,170 18, T2B-5000X ,170 18, T2B-5000X ,672 18, T2B-5000X ,672 18, T2B-5000X ,672 18, T2B-5000X ,672 18, T2B-5000X ,672 18, T2B-5000X ,668 18, NOTE: All dimensions are nominal. Data shown are typical. Actual data for any particular unit may vary. 10
11 T2B-5000 FC - Circular Flange Part No.: T FC FCS - Upper Square Flange Part No.: T FCS SF - Square Mount Part No.: T SF D E Ø 13.5 mm.53 in. 21 mm.83 in. 36 mm 1.42 in Body Ø mm 1.42 in. 21 mm 0.83 in. 130 mm/5.12 in mm/4.31 in. SF1 *.635 mm.025 in. SF mm 5.50 in mm 4.50 in mm 4.50 in mm 5.50 in mm 4.31 in. 155 mm 6.10 in. 175 mm 6.89 in mm 0.53 in. Ø 155 mm 6.10 in. *Approximate value FMCW - Three Hole Mount FMW - Four Hole Mount MW - ug Mount FM1 17 mm.67 in. FM M2 Ø 18.0 mm.71 in mm 7.76 in mm 6.50 in. FM2 M16 S.H.C.S. 5/8 S.H.C.S. 117 mm 4.61 in. M M1 196 mm 7.72 in. 165 mm 6.50 in..75 in 54.0 mm 2.13 in mm 3.25 in mm 4.61 in. 196 mm 7.72 in. SM - Side Mount Part No.: T SM 38 mm 1.50 in. 14 mm.55 in mm 28 mm in in. 14 mm.55 in. Ø 13.5 mm.53 in. 79 mm 3.11 in mm 5.77 in. 52 mm 2.05 in. 135 mm 5.31 in. 95 mm 3.74 in mm 6.5 mm.50 in..26 in. 135 mm 5.31 in. NOTE: All flanges, except welded, are ordered separately. 11
12 Tanker T and Tanker S Gas Springs Nitro-Dyne XP Manifolds Delay Return Manifolds Di-Dro Advanced Forming Systems T2 Standard Gas Springs T3 Gas Springs T4 Gas Springs Mini Gas Springs Controllable Gas Springs Adaptive Cams Mechanical Cams Accessories U.S.A Brecksville Road Brecksville, OH USA Tel: , Fax: hyson@asbg.com Canada 975 Fraser Drive, Unit 14 Burlington, ONT 7 4X8 Canada Tel: Fax: Mexico Av. Carlos Salinas de Gortari #1010 Ote Col. Apodaca Centro CP Apodaca, N.. Mexico Tel: Fax: Calle 12 Pte. # esquina con Av. Esteban de Antuñano Col. a ibertad Puebla, Mexico C.P Tel: +52 (222) China Nitrogen Gas Products, Associated Spring (Tianjin) Co., td. Building A, Minggang Industrial Park Hong Kong Street, Jinnan Economic Development Zone Tianjin, China Post Code Tel: Fax: Korea Barnes Korea, td. Zip Code , #1110, Sungjee Starwith Gwanyang-dong Dongan-Ku Anyang-Si Gyeonggi-do, Korea Tel: Fax: Hyson Products 2011 T2B2MOCT11
T2 B Series. Compact Height Nitrogen Gas Springs
T2 B Series Compact Height Nitrogen Gas Springs ife in excess of 100,000 stroke meters. Cartridge design for easy maintenance. Oil pipe prevents oil leaving the springs in a hosed system and helps maintain
More informationT2 SC Series. Sub-Compact Nitrogen Gas Springs
T2 SC Sris Sub-Compact Nitrogn Gas Springs Nin modls including a on-inch diamtr spring with 4250N/955 lb. contact orc. Strok lngths to 50mm/1.97 in. Idal or havy gaug blanking, pircing, stripping, shallow
More informationRA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
More informationSoft-hit Striker Plate - SSP. Chapter 5
oft-hit triker Plate - P Chapter 5 oft-hit triker Plates (P) have been engineered to address three of the major problems that face metal stampers: Excessive shock loads High noise levels Poor part quality
More informationH&O DIE SUPPLY, INC INTRODUCING HYSON CUSTOM ENGINEERED SERVO PRESS CUSHIONS
SERVO PRESS CUSHIONS INTRODUCING HYSON CUSTOM ENGINEERED SERVO PRESS CUSHIONS A HISTORY OF INNOVATION Hyson Products designed and manufactured the first pneumatic die cylinder in 1939. From that auspicious
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing
More informationUniversal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
More informationEC 60T. Spare parts list. Hydraulic breakers. EC 60T s/n BES Construction Tools PC AB No
EC 60T Spare parts list Hydraulic breakers EC 60T s/n BES095068 2018 Construction Tools PC AB No. 9864001001 2018-02 Service, repair and wear part kits Label kit 1 Seal kit 3 Mechanical Hydraulic breaker
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More information«АВТОП» Latch RH1 Locks. Plate Control. Static Fmax newton Dynamic Fmax newton. Latch locks
Latch locks KL Static Fmax. 40000 newton Dynamic Fmax. 16000 newton REF L La Lb l1 Includes Does not include KL 1-2-90 90 117 137 172 KF/KK/KV KU KL 1-2-170 170 197 217 252 KF/KK/KV KU KL 1-2-220 220 247
More informationGeneral Specifications
General Specifications Model PR10 Inductive Conductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable
More informationTimken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
More informationSTANDARD CARTRIDGE VALVES 2/2-WAY
STNDRD CRTRIDGE VLVES -WY SERIES NG NG ulletin - DESIGNTION SYMOL PGE General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves - -way Cartridge
More informationT E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
More informationCompact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
More informationStandard Cartridge Valves 2/2 Way Series NG16 NG100
Standard Cartridge Valves Way Series NG NG Table of Contents Designation Symbol Page General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves
More informationGRM SERIES. Mechanical stamping and forming machines GRM 80E / GRM 80P
GRM SERIES Mechanical stamping and forming machines GRM 80E / GRM 80P More economical large-scale production Produce stamped and formed parts in large batches with even higher productivity. Benefit from
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More informationRMI Temperature control
RMI Temperature control 7 nominal diameters... hot and cold water, glycol water and heat transfer fluid circuits temperature control on injection presses Safe and quick locking A large number of locking
More informationT E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
More informationPIONJÄR. Spare parts list. Petrol drills and breakers 120, 120 AV, 121 A, 130, 130 AV, 131 A
PIONJÄR 0, 0 AV, A, 0, 0 AV, A Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 00 0b 00 PIONJÄR 0, 0 AV, A, 0, 0 AV, A Contents Contents General Information................................................................
More informationSB 302. Spare parts list. Hydraulic breakers. Valid from serial number Atlas Copco Construction Tools AB No f
SB 0 Spare parts list Hydraulic breakers SB 0 Valid from serial number BES 0 Atlas Copco Construction Tools AB No. 900 0 0f 0 SB 0 Contents Contents General information................................................................
More informationVariable Displacement Vane Pumps
Variable Displacement Vane Pumps Service Parts Manual VVS0 VVS1 VVS2 VVS3 VVP1 VVP2 VVP3 Available Spares Shaft Keys PUMP PART DIMENSIONS NUMBER VVS0-R 02-352334 6x6x25 VV*1-R 02-352335 8x7x25 VV*2-R,
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationDouce Hydro. Serie DHI - MT4 - Center trunnion mounting - 1 -
Standard specifications: Heavy duty hydraulic cylinders - 3000 PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B93.1 191 Serie DHI - MT - Center trunnion mounting
More informationEasy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More information38 SERIES JUMBO MODULAR
8 SERIES JUMBO MODULAR A I R P R E P A R A T I O N S Y S T E M CORPORATION Filter The F8 jumbo filter includes a standard -micron element, quick-disconnect integral plastic bowl with bowl guard, and manual
More informationSB 52. Spare parts list. Hydraulic breakers Atlas Copco Construction Tools AB No e
SB Spare parts list Hydraulic breakers 0 Atlas Copco Construction Tools AB No. 900 09 0e 00 SB Contents Contents General information................................................................ Spare
More informationThermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
More informationV88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
More informationVickers Service Data Vane Pumps Thru-Drive Vane Type Pump (F3)-35VT*(M)-**A(M)2-**-*-22-* Revised 2/98 I-3149-S
Vickers Vane Pumps MODEL VTA VTB VTBP VTC ADAPTER PLATE 584936 584922 ADAPTER 941296 941297 581833 941298 FOR BP MODELS AN ADAPTER AND SPACER IS REQUIRED. SPACER 02-136817 RETAINING COUPLING COUPLING RING
More informationSB 152. Spare parts list. Hydraulic breakers Atlas Copco Construction Tools AB No f
SB Spare parts list Hydraulic breakers 0 Atlas Copco Construction Tools AB No. 900 00 0f 00 SB Contents Contents General information................................................................ Spare
More informationTimken Lubricant Delivery Systems. Friction management solutions to keep systems running smoothly
Timken Lubricant Delivery Systems Friction management solutions to keep systems running smoothly SM G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication is
More informationGrease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
More informationV88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
More informationSUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)
COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl
More informationInch / Cross Type Metric Section Style Material Page. Inch Deep Style 92 Durometer Urethane with 70 Durometer Nitrile Energizer
Hydraulic Seals Inch / Cross Type Metric Section Style Material Page Standard 92 Durometer Urethane 7-11 with 70 Durometer Nitrile Energizer Inch Deep Style 92 Durometer Urethane 12-16 with 70 Durometer
More informationVickers Service Data Vane Pumps ThruĆDrive Vane Type Pump (F3)-45VT*(M)-**A(M)2-**-*-22 Rev 2/98 I-3151-S
Vickers Vane Pumps MODEL VTA VTB VTBP VTC ADAPTER PLATE 584936 584922 ADAPTER 941296 941297 581833 941298 FOR BP MODELS AN ADAPTER AND SPACER IS REQUIRED. SPACER 02-136817 RETAINING COUPLING COUPLING RING
More informationElectropneumatic miniature control valves Mounting Connectors Minisolenoid valves Indicators LED seals LED Valve modules Poppet 3/2 single pilot 4/2 s
ElectroPneumatic Miniature Control Valves Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com /47 Electropneumatic miniature control valves Mounting Connectors Minisolenoid
More informationTILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More information97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
More informationF250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
More informationSB 202. Spare parts list Hydraulic breakers. SB 202 s/n BES Construction Tools PC AB No
SB 202 Spare parts list Hydraulic breakers SB 202 s/n BES051618 2018 Construction Tools PC AB No. 9800172001 2018-01 General information This spare parts list applies to the following: Part number 8460030050
More informationUniversal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
More informationAtlas Copco Airmotors
Atlas Copco Airmotors Atlas Copco air motors Leading the industry in development and innovation. Offering a comprehensive range of standard air motors. A premier supplier of air motors engineered to meet
More informationVane Pump Series SDV. Fixed Displacement zp14. Catalogue HY0738-A/CH November Hydraulics. Hydraulics
SDV Fixed Displacement zp4 Catalogue HY078-/CH November 004 Contents SDV Introduction General applications instructions... Maximum speed... Pressure ratings... Minimum allowable inlet pressure... General
More informationIndustrial Shock Absorbers
EA to EA3 Enertrols rugged EA and EA 3 Series heavy industrial adjustable shock absorbers are available to handle your most demanding linear deceleration applications. Energy capacity ratings are high
More informationInstallation and Operating Manual FM50 IOM 2-18 DRAFT
Installation and Operating Manual Table of Contents 1. Safety Precautions... 3 2. Details 2.1 Part Numbers... 4 2.2 Configurations... 5 2.3 Specifications... 13 2.4 Cables and Wiring... 14 2.5 Interface,
More informationYOUR DRILLING EXPERT EXPLORATION & GRADE CONTROL. wwww.halcorocktools.com
YOUR DRILLING EXPERT EXPLORATION & GRADE CONTROL wwww.halcorocktools.com OUR COMMITMENT TO YOU At Rock Tools we pride ourselves on exemplary levels of customer service, support and training to reflect
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. h y d r a u l i c s. Hydraulics Division Eaton / Char-Lynn Hydraulic Products
H y d r a u l i c s ydraulics Hydraulics Division Eaton / Char-Lynn Hydraulic Products h y d r a u l i c s We Manufacture No. 11-895 January 1999 Solutions S o l u t i o n 1 s Experienced system design
More informationInsertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
More informationStandard oil drain plug
PRODUCTS STANDARD OIL DRAIN PLUG STANDARD DRAIN SB Standard oil drain plug The Standard Drain is the original Femco oil drain plug, and was introduced in 1983 to change oil in a quick, clean and environmentally
More informationPower Supply Chassis
Power Supply Chassis Cat. No. 1771-PSC Installation Data This document contains information on: pre-installation considerations compatibility current limitations mounting considerations installation specifications
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
More informationMini Bellows Pumps. 180 Hines Ave. Bellville, OH PH: FAX:
Mini Bellows Pumps Mini Bellows models are ideal for low flow, low pressure metering applications. The pump is constructed entirely of plastic and utilizes GRI s time-proven bellows technology to provide
More informationPlate. Channels - Standard Structural* Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue.
Channels - Standard Structural* Grades Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue. A Depth B Flange Width C Web Thickness Estimated Weight - Lbs. Lbs/Foot
More information12E-05 Hot Runner Series Catalog
U C G Y 12-5 ot unner Series Catalog Stabilize your Process C-1-3_-ev5 6 / 218 U U C C G Y G Y 12-5 System 12 System Information Information ot unner System - hrust Pad / Bolt Down Manifold hrust pad selection
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More informationGPX 1250 Gas Piston Pump
GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.
More informationTemperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
More informationSpare parts list. Handheld pneumatic pick hammers CP 0222 CHIT, CP 0222 CHIT BS, CP 0222 CHOT BS.
Spare parts list Handheld pneumatic pick hammers CP 0 CHIT, CP 0 CHIT, CP 0 CHOT www.cp.com CP 0 CHIT, CP 0 CHIT, CP 0 CHOT 9800 00 0 CP 0 CHIT, CP 0 CHIT, CP 0 CHOT Contents Contents General information...............................................................
More information5. Operating instructions: Octagon 200CL
1. Technical specifications 5. Operating instructions: Octagon 200CL Copyright 2015 by Endecotts Ltd. 33 1. Setting up Technical specifications SIEVE SHAKER MODEL: Octagon 200CL General Information The
More informationProBell Rotary Applicator. High Performance Rotary Bell Atomizer System
ProBell Rotary Applicator High Performance Rotary Bell Atomizer System High Performance, Scalable System Graco s new ProBell rotary atomizer offers high performance spraying with intuitive controls and
More informationDX300LCA SLR. Construction Equipment. Engine Power Operational Weight Bucket / PCSA
Construction Equipment DX300LCA SLR Engine Power Operational Weight Bucket / PCSA SAE J1349, net 147kW (197HP) @ 1,900rpm 30,900kg 0.64m 3 (0.83cu.yd) DIMENSIONS A D E H J F P O B C G I K L M N Dimensions
More informationCOBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c
COBRA COMBI Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 0 0c 00 COBRA COMBI Contents Contents General information................................................................
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 55 Individual mounting Series inline 35 Sealed solenoid enclosure Manual operator 100 200 Ext. pilot port Ext. pilot Pilot filter Pilot exh. 55
More informationLevel switch NS 10/NS 25..-AM
Level switch NS 10/NS 25..-AM Fluidcontrol Oil tanks in lubrication and oil supply systems are often under overpressure compared to the ambient atmosphere. All oil moistened parts of devices mounted externally
More informationFlow VA 500/
VA 500/ 520 Verbrauch 79 What are the advantages of the flow measuring technology of CS Instruments? 1) 500 is mounted by means of a standard 1/2 ball valve. During mounting and dismounting the safety
More informationVALVE ACCESSORIES & CONTROLS V100 POSITIONER VAC V100 SERIES POSITIONER SIMPLE DURABLE RELIABLE
VALVE ACCESSORIES & CONTROLS V100 POSITIONER VAC V100 SERIES POSITIONER SIMPLE DURABLE RELIABLE WWW.VACACCESSORIES.COM 205-678-0507 The V100 Positioner V100-EX The V100E (0/10V) Nema 4x I/P or V100-IS
More informationFlow control valves Series SCU, MCU, SVU, MVU, SCO, MCO
S E R I E S SCU MCU SVU MVU SCO Flow control valves Series SCU, MCU, SVU, MVU, SCO, Unidirectional and bidirectional banjo flow controllers Ports M, G1/8, G1/4, G3/8, G1/2 A U T O M A T I C These unidirectional
More informationSubsea Valves.
Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:
More informationAtlas Copco air motors
Atlas Copco air motors Atlas Copco air motors Leading the industry in development and innovation. Offering a comprehensive range of standard air motors. A premier supplier of air motors engineered to meet
More informationClamping Device, Series 2709
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Clamping Device, Series 2709 Technical data Pneumatic Open mechanism Technical Data Type Power transmission
More information6215L Inline & NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
L Inline & NMUR series, / & / > Port size: / (ISO /NPT) or flanged with NMUR interface > Suited for outdoor use under critical environment conditions (see solenoid list) > Variable valve solenoid combination
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 59 Individual mounting Series inline 35 100 Ext. pilot port Accumulator EXH. Pilot valve Function plate From accumulator Pilot exhaust To accumulator
More information15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
More informationInline filter. Features: RE 51402/09.10 Replaces: Types 100 FLEN 0160 to 0630; 100 FLE 0045, 0055, 0120
Inline filter RE 50/09.0 Replaces: 0.09 / Types 00 FLEN 060 to 060; 00 FLE 005, 0055, 00 Nominal sizes according to DIN 550: 060 to 060 Nominal sizes according to BRFS: 005, 0055, 00 Nominal pressure 00
More informationFlow Measurement SITRANS F M
low sensor MAG P Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage
More informationFlow. Order number VA 550. Order no. VA 570. Further accessories A_...M_
Order number VA 550 housing High-pressure rig for VA 550 recoended for mounting from 10 to 100 bar Order no. 0695 0550 A_...M_ 0530 1155 Order no. VA 570 Order no. 0695 0570 0695 0571 0695 0572 0695 0573
More informationEST Group Pop-A-Plug Tube Plugging System
Optimized Tube Plugging for Air Cooled Heat Exchangers EST Group Pop-A-Plug Tube Plugging System Fast, Safe, Reliable Results: Improved Performance at Significantly Lower Cost provides all the tools for
More information4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized.
Swivel Joints Table of Contents Advantages of using Eaton Swivel Joints 2 Selection Criteria and Product Safety Considerations 3 FS6500 4 Features and Benefits 4 Performance Testing 4 Repair Kit 10 BD5500
More information3/2 5/2 SERIES 362/562
Manual and Pilot Operated Spool Valves 6L Stainless Steel and Brass Bodies /4" to " NPT / / 6/6 Features Ideal for valve automation for the oil and gas market Reliable, robust design with high flow performance
More informationEMP1 OPERATING & INSTALLATION INSTRUCTIONS
468 Liberty Drive Wittenberg, WI 54499 U.S.A. Tel: 715-253-2801 Ver.11-01-2008 Fax: 715-253-2811 Web: www.solar.imcinstruments.com REV. 5-15-10 EMP1 OPERATING & INSTALLATION INSTRUCTIONS EMP1-0200 PILOT
More informationCylinders. CGT Series. Compact Guide Slides. We re everywhere you need us to be! 141
We re everywhere you need us to be! CGT Series Compact Guide Slides Pneumatic-Catalogue-GB-28-1 www.numatics.com 141 CGT Series : CGT Series General Information CGT Series is ideal where high load and
More informationMiniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm
Electronic pressure measurement Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further approvals see page 5 MicroTronic
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationExplosionproof Meter Housings
METER HOUSINGS Explosionproof Drilled and tapped to specification, attach layout sheet. Dimensions are internal. XJDGCH N4 XJDFGCH N4 4 1/8 x 4 1/8 X 3 XJMCGCH N4 6 3/4 x 6 3/4 x 3 XJTGCH N4 XJTFGCH N4
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationPGS10 Series Pressroom Gripper System
PGS10 Series Unique, patented, modular design uses common components to reduce your purchase price and stocking requirements. Features a robust hardened steel chassis and grip force up to 450 lb at 80
More informationBARE SHAFT PUMPS AND MOTOR PUMPS
APPLICATIONS Air Conditioning Heating and ventilation Refrigeration Fire protection Plumbing Water Circulation Transfer and Irrigation Pressure Boosting Process Industries Water Treatment and Supply DESIGN
More informationPiston rod cylinder Guide cylinders Series MSN. Brochure
Brochure 2 ini slide, narrow version Ø 6-6 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide 3 overview overview 9 Sensors and sensor mountings, accessories Sensor,
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationHarrier. Controllers. Electronic Chemical Injection Rate Controllers
Harrier Controllers Electronic Chemical Injection Rate Controllers Harrier + Chemical Injection Controllers Electronic Chemical Injection Rate Controllers with Remote Monitoring The Harrier+ unlocks features
More informationSPARE PARTS LIST CP COMPRESSOR. Model CPD CPD 75
SPARE PARTS LIST CP COMPRESSOR Model CPD 75-00 EN 05 0 5 CPD 75 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? MAINTENANCE KITS STANDARD UNITS MOTOR-COMPRESSOR UNIT -7 AIR CIRCUIT -9
More informationNRG Series Parallel Gripper
NRG Series Parallel Gripper www.numatics.com Table of Contents NRG Series Features and Benefits 3 How To Order 4 Dimensions 5 Specifications and Load Ratings 6 NuMate Mounting System 7 Grippers 7 Sensing
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More informationP F
12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM Copyright 2014 REV. 9-MAY-2014 1 SAFETY INFORMATION PG. 3 SET-UP PROCEDURE PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA
More informationTH ST N OAK PARK HEIGHTS, MN P F
12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM SAFETY INFORMATION PG. 3 SET UP PROCEDURE PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 OPERATING PROCEDURES PG.
More information