SPECIFICATIONS BIO-PHARM FITTINGS... BIO-PHARM FITTINGS SPECIFICATIONS... ORDERING SPECIFICATIONS... Pagina 2 STAINLESS STEEL FITTINGS PRODUCT CATALOG
|
|
|
- Kimberly Small
- 6 years ago
- Views:
Transcription
1 FITTINGS io-pharm Fittings
2 SPECIFICTIONS STINLESS STEEL FITTINGS PRODUCT CTLOG IO-PHRM FITTINGS... VNE s io-pharm Fittings are manufactured in accordance to SME PE specifications. In addition to heat numbers being permanently etched, a manufacturing job number is also etched. This ensures total traceability for a consistent, high quality product manufactured specifically for the pharmaceutical and high purity markets. IO-PHRM FITTINGS SPECIFICTIONS... IO-PHRM FITTINGS SPECIFICTIONS... Product: Range: Materials: Finish: Marking: io-pharm Fittings are produced to the SME PE Specifications. io - Pharm Fittings are available in sizes 1/2ý through 6ý. ll Fittings are fabricated in T316L Stainless Steel for superior corrosion resistance and low carbon precipitation of welds. variety of surface finishes are available. The products are etched with heat numbers, grade of material, SME Code, Internal Surface Symbol (SFF#), plus VNE markings. Individual fittings fabricated of more than one original component during the manufacturing process will carry multiple heat numbers for full identification and traceability. Material Test Reports are shipped with every order. Packaging: ll of our io-pharm Fittings are furnished capped and bagged. Each open port is capped and the fittings are individually sealed in a plastic bag. label on each bag shows VNE Corporation, part number, material type, size, and Ra finish. ORDERING SPECIFICTIONS... Specify: Quantity Product description or Part No. Material Type Finish Requirements VNE CORPORTION Pagina 2
3 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG IO-PHRM FITTINGS io-pharm Fittings Tolerances Nominal OD 1/2ý 3/4ý 1ý 1 1/2ý 2ý 2 1/2ý 3ý 4ý 6ý OD Tolerance ±.005 ±.005 ±.005 ±.008 ±.008 ±.010 ±.010 ± Nominal Wall Thickness Wall Thickness Tolerances efore EP Wall Thickness Tolerance fter EP Control Portion Tangent Length Squareness Face to Tangent Off ngle Off Plane io-pharm Surface Finish Surface Finish Code ID Finish (Ra Max) PE Designation OD Finish PL 20 Ra Mechanical SFF 1 32 Ra PT 25 Ra Mechanical SFF 2 32 Ra PQ 30 Ra Mechanical SFF 3 32 Ra PC 20 Ra Mechanical SFF 1 Unpolished PF 25 Ra Mechanical SFF 2 Unpolished P 30 Ra Mechanical SFF 3 Unpolished PM 15 Ra Mechanical & Electropolished SFF 4 32 Ra PO 20 Ra Mechanical & Electropolished SFF 5 32 Ra PR 25 Ra Mechanical & Electropolished SFF 6 32 Ra PD 15 Ra Mechanical & Electropolished SFF 4 Unpolished PG 20 Ra Mechanical & Electropolished SFF 5 Unpolished PK 25 Ra mechanical & Electropolished SFF 6 Unpolished PX Unpolished Unpolished PZ Unpolished 32 Ra Pagina 3
4 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG CLMP FITTINGS TEG2C - 90 ELOW 1/ / / / TEG2K - 45 ELOW 1/ / / / TEG7 - TEE 1/ / / / Pagina 4
5 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG CLMP FITTINGS TE7ICC6L - INSTRUMENT TEE 1/2 x 1 1/ /4 x 1 1/ x 1 1/ /2 x /4 x x /2 x TEG7R - REDUCING TEE C C 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x 1/ x 3/ x x 1 1/ x x 2 1/ x 1/ x 3/ x x 1 1/ x x 2 1/ x x Pagina 5
6 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG CLMP FITTINGS TEG7RS - SHORT OUTLET REDUCING TEE 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x 1/ x 3/ x x 1 1/ x x 2 1/ x 1/ x 3/ x x 1 1/ x x 2 1/ x x TEG7S - SHORT OUTLET TEE 1/ / / / Pagina 6
7 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG CLMP FITTINGS TEG9 - CROSS 1/ / / / TEG14RT - HOSE DPTER 1/ / / / TEG16 - END CP 1/ / / / Pagina 7
8 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG CLMP FITTINGS TEG21 - CLMP X MNPT DPTER 1/2'' & 3/4'' 1'' through 4'' 1/2 x 1/ /2 x 1/ /2 x 3/ / /2 x 3/ /4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ / / / TEG22 - CLMP X FNPT DPTER 1/2'' & 3/4'' 1'' through 4'' 1/2 x 1/ /2 x 1/ /2 x 3/ / /2 x 3/ /4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ / / / Pagina 8
9 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG CLMP FITTINGS TEG31CC CONCENTRIC & TEG32CC ECCENTRIC REDUCERS 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x x 1 1/ x x 2 1/ x x 1 1/ x x 2 1/ x x ORITL WELD FITTINGS TE2S - 90 ELOW 1/ / / / Pagina 9
10 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE2C - 90 ELOW CLMP ONE END 1/ / / / TE2KS - 45 ELOW 1/ / / / TE2KC - 45 ELOW CLMP ONE END 1/ / / / Pagina 10
11 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TEG14M7 - CLMP FERRULE TE7IWW6L - INSTRUMENT TEE 1/ / / / /2 x 1 1/ /4 x 1 1/ x 1 1/ /2 x /4 x x /2 x TE7RWWC - REDUCING TEE WITH CLMP RNCH 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x /2 x 1 1/ /2 x x x 1 1/ x x 2 1/ x x 1 1/ x x 2 1/ Pagina 11
12 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE7RWWCS - REDUCING SHORT OUTLET TEE WITH CLMP RNCH 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x 1/ x 3/ x x 1 1/ x x 2 1/ x 1/ x 3/ x x 1 1/ x x 2 1/ x x Pagina 12
13 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE7RWWW - REDUCING TEE 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x 1/ x 3/ x x 1 1/ x x 2 1/ x 1/ x 3/ x x 1 1/ x x 2 1/ x x TE7WWC - TEE WITH CLMP RNCH C C 1/ / / / Pagina 13
14 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE7WWCS - SHORT OUTLET TEE WITH CLMP RNCH 1/ / / / TE7WWW - TEE 1/ / / / TE9WWWW - CROSS 1/ / / / Pagina 14
15 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE9RWWWW - REDUCING CROSS 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x /2 x 1 1/ /2 x x x 1 1/ x x 2 1/ x x 1 1/ x x 2 1/ x x TE16W - CP 1/ / / / Pagina 15
16 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE31CW - CONCENTRIC REDUCER CLMP X WELD 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x x 1 1/ x x 2 1/ x x 1 1/ x x 2 1/ x x Pagina 16
17 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE32CW ECCENTRIC REDUCER CLMP X WELD 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x x 1 1/ x x 2 1/ x x 1 1/ x x 2 1/ x x Pagina 17
18 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE31WW - CONCENTRIC REDUCER 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x x 1 1/ x x 2 1/ x x 1 1/ x x 2 1/ x x Pagina 18
19 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE32WW ECCENTRIC REDUCER 3/4 x 1/ x 1/ x 3/ /2 x 1/ /2 x 3/ /2 x x 1/ x 3/ x x 1 1/ /2 x 1/ /2 x 3/ /2 x /2 x 1 1/ /2 x x x 1 1/ x x 2 1/ x x 1 1/ x x 2 1/ x x Pagina 19
20 IO-PHRM FITTINGS STINLESS STEEL FITTINGS PRODUCT CTLOG ORITL WELD FITTINGS TE2UWWC USE POINT WITH OTTOM CLMP OUTLET C D 1 x 1/ /2 x 1/ x 1/ C 2 1/2 x 1/ x 1/ x 1/ D TE2USWWC USE POINT WITH SIDE OTTOM CLMP OUTLET C D 1 x 1/ /2 x 1/ C 2 x 1/ /2 x 1/ x 1/ x 1/ D TE2UWWW USE POINT C D C D 1 x 1/ /2 x 1/ x 1/ /2 x 1/ x 1/ x 1/ Other sizes of 180 Use Points are available upon request. Pagina 20
21 portamos calidad a la industria farmacéutica v. San Martín 4723 (c1417dsh) Tel: (54-11) Fax: (54-11) ventas@famiq.com.ar // exports@famiq.com.ar Sucursal Mendoza: mendoza@famiq.com.ar Sucursal Rafaela: rafaela@famiq.com.ar Sucursal Rosario: rosario@famiq.com.ar Sucursal Tucumán: tucuman@famiq.com.ar
FITTINGS. Clamp Fittings VNE
FITTINGS Clamp Fittings VNE SPECIFICTIONS STINLESS STEEL FITTINGS PRODUCT CTLOG CLMP FITTINGS... Clamp Style Fittings are most popular for easy assembly and breakdown of process lines and equipment. VNE
DISTRIBUTION SMS AC IER IN OXYDABLE - STAINLE SS STEEL SANITARY TUBES & FITTINGS FOR FOOD & LIFE SCIENCES
DISTRIUTION SMS C IER IN OXYDLE - STINLE SS STEEL SNITRY TUES & FITTINGS FOR FOOD & LIFE SCIENCES 3 DISTRIUTION CIER INOXYDLE - STINLESS STEEL Hygienic tubes & fittings for food & Life Sciences HOW SMS
QUALITY PRODUCTS, COMPETITIVE PRICING AND SERVICE BEYOND YOUR EXPECTATIONS Phone (408) Fax (408)
Product Overview Vacuum Components & Bellows Pages 2-6 SSL NW/KF components are a system of stainless steel vacuum flanges for tube sizes from 3/4" through 2" OD. These flanges can operate in high vacuum
90 Elbows Long Radius
90 Elbows Long Radius DN O.D. Center SCH STD SCH XS SCH XXS SCH 10 SCH 20 SCH 30 SCH 40 SCH 60 SCH 80 SCH 100 SCH 120 SCH 160 Inch mm to End Thickness Weight Thickness Weight Thickness Weight Thickness
per metre (Kg) 20mm 0.85
Dia Dia ROUND BAR machining 4 0.09 6 0. 8 0.9 6 0.26 2 0.4 9 6 0.4 8 0.4 6mm 0.4 6 0.6 4 0. 20mm 0.8 6 0.9 8.0. 8.4 4 2. 6 2.48 8 2.60 mm 2.6 2.09 40mm.2 8.6 4 4.2 8 4.8 2.49 2 8 6.20 2 4 6.9 2 8. 2 2
Harrison Machine & Plastic Corporation HARRISON SUPERDUCT FUME EXHAUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG
Harrison Machine & Plastic Corporation HRRISON SUPERDUCT FUME EXHUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 01-01-2018 1 HRRISON SUPERDUCT PVC DUCT PIPE Part No. Size O.D.
GEMO 1.1 SANITARY ASME
SANIARY ASME 09 Catalog able of Contents page 11 24 S-ine Fittings Introduction & Order Information Weld Fittings Introduction & Order Information Elbows 5009 A2CMP... 13 5010 A2KMP... 13 ees 5011 A7MP....
Fittings Product Catalog
member of NEUMO Ehrenberg Group Fittings Product Catalog Stainless Solutions For Life T a b l e o f C o n t e n t s STINLESS STEEL FITTINGS PRODUCT CTLOG bout VNE... Neumo Ehrenberg Group... 1 2 CLMP FITTINGS
SCH 5S/10S/40S/80S. Stainless Steel/Carbon Steel Butt-welding Fittings
Stainless Steel/arbon Steel Butt-welding Fittings SH 5S/10S/40S/80S Ranged from equal and reduced tees, 45 and 90 elbows, concentric and eccentric reducers, to stub ends and caps, DIE ERSTE supplies a
Stainle ss Ste e l Fit tings
www.swagelok.com Stainle ss Ste e l Fit tings For the Sanitar y Industries Jensen Series Kwik-Clamp, tube butt weld, cme threaded and plain bevel-seat, and specialty end connections 0 and 6L stainless
DAJA. Contents. Technical Specification. Micro Butt-Welding Fittings. Material Designation. Surface Roughness Designation (Wetted Area)
Contents Technical Specification Micro uttwelding ittings Description Page Material Designation Technical Specification and designation 01 Designator Material Specification Demonstration of Part Number
Compression Fittings
RSS COPRESSION Compression Fittings RSS FITTINS Thread - Tube O.D. 1/8 /16 1/4 5/16 /8 7/16 1/2 5/8 /4 7/8 Thread - 5/16-24 /8-24 7/16-24 1/2-24 9/16-24 5/8-24 11/16-20 1/16-18 1-18 1-1/8-18 Working Pressure
PNEUMATIC CONVEYING COMPONENTS
PNEUMATIC CONVEYING COMPONENTS TUBING, PIPE, BENDS, COUPLINGS & FITTINGS A HIGH-PERFORMANCE COMPANY H-P Products is certified to ISO 9001:2008 welcome to h-p products! H-P Products specializes in supplying
Control Units Ex e in Stainless Steel LCS*.*
Features Assembly Stainless steel enclosures Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex de and Ex tb Up to 4 operators per control unit, base-mounted contact blocks Wide choice of operators,
CLAMP FITTINGS PAGE 1-24
TLE OF CONTENTS STINLESS STEEL FITTINGS PRODUCT CTLOG CLMP FITTINGS PGE 1-24 Clamp Specifications...2 Clamp Industry Cross - Reference... 3 Clamp Elbows... 4-6 Clamp Tees... 6 Clamp Cross... 7 Clamp Ferrules...
aluminium extrusions 2-8 stainlees steel bar and sections stainless steel seamless tube 24-25
contents aluminium extrusions 2-8 brass 9 - copper 4 - stainlees steel bar and sections 6-2 stainless steel seamless tube 24-2 stainless steel hygienic tube 26 stainless steel handrail tube 2 stainless
Kully Reference Book
Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe
CLAMP FITTINGS VNE. Weld Fittings STAINLESS STEEL FITTINGS PRODUCT CATALOG FITTINGS
LMP FITTINGS STINLESS STEEL FITTINGS PROUT TLOG FITTINGS Weld Fittings VNE 25 1 SPEIFITIONS STINLESS STEEL FITTINGS PROUT TLOG WEL FITTINGS... Weld Fittings are used on permanent installations where process
Level Plus. Magnetostrictive Liquid-Level Sensors with Temposonics Technology. Accessories Catalog
Level Plus ostrictive Liquid-Level Sensors with Temposonics Technology Accessories Catalog SENSORS Document 551103 Revision C Floats, s, Meters, Enclosures, Indicators, Interface Terminals and Programming
Level Plus. Product Accessories. Magnetostrictive Liquid-Level Sensors with Temposonics Technology
Level Plus ostrictive Liquid-Level Sensors with Temposonics Technology SENSORS Product Accessories Floats, s, Meters, Enclosures, Indicators, Interface Terminals and Programming Document Part Number 551103
Stainless Products, Inc.
Stainless Products, Inc. CAT. 2012-00 www.stainless-products.com Sanitary and Industrial Fittings Stainless Products, Inc. 1649 72nd Avenue Somers, WI 53171 Ph: 800-558-9446 262-859-2826 Fax: 262-859-2871
CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - locking trays PRODUKTINFORMATION
C B L E S N I T T I O N CBLE ROUTING SYSTEMS WIRE CBLE TRYS - locking trays PRODUKTINFORMTION Table of Contents. Locking Cable Trays S20 - S22N, S121-S123.... Pgs 4-5 Locking Cable Trays K25 - K91... Pgs
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG EFFECTIVE
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 4-15-13 SUPERDUCT PVC DUCT PIPE Part No. Size O.D. Wall Std. Length List Price Per Ft. List Price Per Ft. Extruded 10 ft. 20 ft. 1033-PP-02
Level Plus. Product Accessories. Magnetostrictive Liquid-Level Sensors with Temposonics Technology
Level Plus ostrictive Liquid-Level Sensors with Temposonics Technology SENSORS Product Accessories Floats, s, Meters, Enclosures, Indicators, Interface Terminals and Programming Document Part Number 551103
LOCAL EXTRACTORS Pure advantages. The ideal extractor for industrial environments.
N new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability. H - Hood designed for maximum capture PR's design is based on Movex's basic principles:
Weld Fittings Ultrahigh-Purity and Industrial
www.swagelok.com Catalog Title Weld ittings Ultrahigh-Purity and Industrial / to in. and to mm 3, 3, 3 VR, and 3 VIM/VR stainless steel materials ittings for manual or automatic welding equipment 2 Weld
Information Notification The Product Marking Code of SOT89 will be changed. For details please refer to the attached document.
PCN Print: Customer Information Notification 201209004I of 2 10/12/2012 10:40 AM Customer Information Notification 201209004I Issue Date: Effective Date: 15-Oct-2012 29-Oct-2012 Dear Product Data, Here
CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - standard open trays PRODUCT INFORMATION
C L E S N I T T I O N CLE ROUTING SYSTEMS WIRE CLE TRYS - standard open trays PROUCT INFORMTION Table of Contents Open cable trays S25 - S26, S30M - S35W.... Pgs 4-5 Open cable trays S36 - S39W, S30- -
standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*
5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,
EnviZion TM Hygienic Diaphragm Valve
EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,
UNIPLEX SERIES. UPC Series Product Features. UPC Construction Materials
Ultra-High Purity Diaphragm Valves (UPC) Ultra-High Purity Bellows Valves (UFC) Ultra-High Purity Bellows Valves (UFCR) Ultra-High Purity Tee Block Bellows Valves (UBC) This compact Uniplex (diaphragm
Gabion Box. Selvedge Wire (mm) 6x Mesh Wire (mm) Mesh Opening (cm) Lacing Wire (mm) LxWxH (m) Plastics Coated.
Gabion Box LxWxH (m) 2x1x0.5 Opening (cm) Selvedge Lacing Square meter Material 8x10 2.00-3.05 2.7-3.8 Hot dip galvanized 2.2-3.0 10x12 2.00-3.20 2.7-4.0 High galvanized 7.5 12x15 2.00-3.80 2.7-4.2 5%
ADAPTERS AND TUBE FITTINGS
DPTERS INDEX Section Pages Hose 15-67 Fittings 68-180 dapters and Tube Fittings 181-228 DPTERS ND TUE FITTINGS Description Page dapters raze and weld to 37 flare 221 raze and weld to split flange 220 SPP
Adapter system for measuring instruments with G1 hygienic connection Model process adapter
Accessories Adapter system for measuring instruments with G1 hygienic connection Model 910.61 process adapter WIKA data sheet AC 09.20 Applications Food, beverage and pharmaceutical industry Cosmetics
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
LOCAL EXTRACTORS. The ideal extractor for industrial environments. Pure advantage
The ideal extractor for industrial environments. New technology in combination with new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability.
Water Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
QUICKSHIP STOCKING PROGRAM
ISE, Inc. QUICKSHIP STOCKING PROGRAM A Guaranteed Delivery Program BANDS CARTRIDGES STRIP THERMOCOUPLES DIN CONTROLLERS ORDERING INFORMATION Ordering Options 1. Call (440) 237-3200 to place an order. 2.
brass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
Ultrasonic Calibration Blocks & Welded Flawed Specimens for NDE Training
Ultrasonic Calibration Blocks & Welded Flawed Specimens for NDE Training Ultrasonic Calibration Blocks Custom blocks available upon request All blocks are available in metric/ inch dimensions Standard
CLASS 150. Investment Cast Stainless Steel Threaded End Fittings
Investment Cast Stainless Steel Threaded End Fittings Covering sizes from /8 to, DIE ERSTE manufactures and supplies the highest quality investment cast stainless steel threaded end fittings. In this series,
M M. P ipe BRASS BRASS FITTINGS F G. Actual outside diameters of pipe threads. Actual Male Thread Profiles
RSS FITTINS Pipe RSS Lead Free Fittings see pages 166-175 For ronze & Larger Sizes see pages 208-215 For SPT/ SPP see pages 116-117 P ipe Size 1/16 1/ 8 1/ 4 3/ 8 1/ 2 3/ 4 1 T hread Size e 1/16-27 1/8-27
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
CoriolisMaster mass flowmeter Automation solution for mixing applications
ABB EASUREENT & ANALYTICS APPLICATION NOTE Coriolisaster mass flowmeter Automation solution for mixing applications High-precision and cost-effective mixing of conductive or nonconductive fluid media easurement
Technical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
SECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
P ipe BRASS BRASS FITTINGS PIPE. Actual outside diameters of pipe threads. Actual Male Thread Profiles
RSS FITTINGS Pipe PIPE RSS For ronze & Larger sizes see pages 187-200 For SPT/ SPP see pages 112,113 P ipe Size 1/16 1/ 8 1/ 4 3/ 8 1/ 2 3/ 4 1 T hread Size e 1/16-27 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14
Technical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
1.5 to 5 Tons INDOOR COILS CH35. Horizontal PRODUCT SPECIFICATIONS CH A - 2 F MODEL NUMBER IDENTIFICATION FEATURES
INDOOR COILS PRODUCT SPECIFICATIONS Horizontal Bulletin No. 20667 November 206 Supersedes August 206.5 to 5 Tons MODEL NUMBER IDENTIFICATION CH 35-8 A - 2 F Unit Type CH = Indoor - Horizontal Series Nominal
GEM TOOL ORDER FORM SAUGERTIES, NY 12477
ALUMINUM PIPING UNION 20 MM 19.7 D1 ALR TU20L6 $ 52.54 20 MM 4A ALR UN 20 $ 9.77 25 MM 19.7 D2 ALR TU25L6 $ 63.38 25 MM 4B ALR UN 25 $ 12.17 32 MM 19.7 D3 ALR TU32L6 $ 97.50 32 MM 4C ALR UN 32 $ 17.24
IP Enclosures Product Overview 2015
IP Enclosures Product Overview 2015 ENGINEERING COMPUTER SERVICES LTD Wall Mounted Electrical Enclosure Systems IP Enclosures is a premium brand of high quality wall mounted electrical enclosures and accessories.
WELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
The Gradient Control Mat (GCM)
The (GCM) Technical Literature INTRODUCTION The gradient control mat by Dairyland is designed to limit step and touch potentials due to lightning because such design will also keep step and touch potentials
Tools for Pipe Welding
E L D Tools for Pipe elding ELD-TECH ApS E L D T Clamp L i f e t i m e warranty on broken parts Due to its unique design, T Clamp ensures that the clamping forces are evenly spread round the pipe to be
SIEVES 200mm.Ø x 50mm. STAINLESS STEEL FRAME
08 SIEVES 200mm.Ø x 50mm. STAINLESS STEEL FRAME *The test sieve is recommended by: ISO, UNE, DIN, AFNOR, BS *Suitable for wet sieving *Each sieve is marked with a serial number to ensure traceability *Delivered
SYSTEM COMPONENT SERIES. Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028)
SYSTEM COMPONENT SERIES Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028) CB SERIES The CB stainless steel check valve series is intended
Temperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
Sincerely, Your Partners at Specified Fittings
N W E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
Bevel Seat. Excellence and quality are best achieved through teamwork and a shared vision. At THOMSEN. we strive to:
BEVEL SEAT FITTINGS Bevel Seat For over 60 years, L. C. Thomsen has been supplying high quality products to the dairy, food and beverage industry. When you think of THOMSEN, three words come to mind: excellence,
BELLOWS COVERS AND.
BELLOWS AND COVERS www.joycedayton.com BELLOWS AND COVERS REDUCE EXPENSIVE MAINTENANCE AND DOWN TIME Protect your Equipment Investment When bellows and covers are fitted to machinery, expensive maintenance
LF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
SSC-PE Series Single mode SC CONNECTOR PLUG
DOCUMENT NUMBER S05-H048-02E Single mode SC CONNECTOR PLUG TECHNICAL SPECIFICATIONS Fiber Optic Products Division 296-1, MATSUHIDAI, MATSUDO-SHI, CHIBA, 270-2214 JAPAN. TEL: +81-47-388-6111 FAX: +81-47-388-4477
1523/1524 Reference Thermometers
1523/1524 Reference Thermometers Measure, graph and record three sensor types with one tool High accuracy PRTs: up to ± 0.011 C Thermocouples: up to ± 0.24 C Precision thermistors: ± 0.002 C Two models
CryoClear. Cryogenic Vials. Innovation. for the long-term storage of your precious samples.
CryoClear Cryogenic Vials Innovation for the long-term storage of your precious samples. CryoClear Cryogenic Vials Innovation to protect your precious samples. Globe Scientific s CryoClear vials are designed
The flawed specimens we produce are used for procedure qualifications, personnel qualifications, performance demonstrations and NDE training.
INTRODUCTION TO FLAWSPEC The flawed specimens we produce are used for procedure qualifications, personnel qualifications, performance demonstrations and NDE training. Flawspec s corporate strategy and
Declaration of Performance (DOP)
Declaration of Performance (DOP) No. 9174 015 DOP 2018-01-08 1. Unique identification code of the product-type: Multi-wall chimney system type DW-ECO-TITAN according to 2. Type, batch or serial number
Composite Type Rupture Disc
Composite 3pg.qxp 6/22/2007 10:31 AM Page 1 Composite Type Rupture Disc ORDERING To assure selection of the correct rupture disc and holder for your application, please determine the following: Preformed
Thermocouple Technology, Inc.
Series E End Cap Series - Manufacturing Standard Valid only for Overall Length L maximum of 24" and/or one-piece construction barstock *NOTICE: TTEC provides a one piece construction machined barstock
BLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
RTD insertion temperature probes
Data sheet 902350 Page 1/6 for temperatures from -50... +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measurement points Due to
Disposable Glassware CO R N I N G A N D P Y R E X D I S P O S A B L E G L A S SWA R E D I G I TA L ST I R R I N G H OT P L AT E S...
Disposable Glassware and Equipment CO R N I N G A N D P Y R E X D I S P O S A B L E WA R E........................... 128 D I G I TA L ST I R R I N G H OT P L AT E S............. 135 Digital Stirring Hot
Heavy Wall Gasketed Sewer Fittings SDR 26 Injection Molded in Sizes 4" 12" Fabricated in Sizes 15" 36"
eavy Wall Gasketed Sewer Fittings SDR Injection Molded in Sizes " " Fabricated in Sizes " " With a.% thicker wall than SDR and high impact retention ring, Royal Building Product s PVC eavy Wall Gasketed
UHP Solutions. Peter Han Dockweiler Asia Co., Ltd.
UHP Solutions Peter Han Dockweiler Asia Co., Ltd. Content Applications and References Qualities Products and Services R4i Ready for installation ZeroCon Flextron EcoPurge EP-Coils Cleanroom 2 Applications
bar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
RHM160. Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications. Features. Applications. Benefits
RHM160 Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications Features Standard Pressure ratings up to 50bar (725 psi) Temperature ratings from -196 to 120 C (-320 to 248 F) Mass flow
SELECTOR SWITCH TYPE 01
DT SHEET SELECTOR SWITCH TYPE 0 MIN FETURES COMPCT, UP TO POSITIONS '000 switching cycles with up to Ncm switching torque Gold plated contacts: micron Robust metal bushing and shaft Operating temperature:
Smart Conductivity. Reliable and Accurate Conductivity/Resistivity Measurement. THORNTON Leading Pure Water Analytics
Smart Conductivity THORNTON Leading Pure Water Analytics 770MAX Conductivity/ Resistivity Sensors ASTM & NIST Traceable Calibration Smart Sensor Technology Two & Four Electrode Designs NPT & Tri-Clamp
Clamps with RUBBER BUSHING
Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example
PT12 SERIES Polypropylene Capacitor
PT12 SERIES Polypropylene Capacitor Polypropylene Plastic Film Wrap, Epoxy End Fill Type Polypropylene Plastic Film Wrap, Epoxy End Fill Type. Among these is the type PT12 polypropylene precision capacitors,
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
SADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 202 08.2012 Manual Part# 161117 Caution: Read all safety and operating instructions before using this equipment.
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX CARBON STEEL BARS Hot Rolled Rounds...3 Squares...4 Strip...4, 5 Flats...5, 6, 7, 8 COLD FINISHED Rounds - 1018...9, 10 Rounds - 1045...10
The Gradient Control Mat (GCM)
LWYS RUGGED. LWYS RELIBLE. The Gradient Control Mat (GCM) Technical Literature INTRODUCTION The gradient control mat by Dairyland is designed to limit step and touch potentials due to lightning because
Index. E Expanded Metal Raised Flattened Grating... 93
Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...
Floor Access Covers. The easy way to see what s underneath! For all horizontal access solutions - talk to Bilco!
Floor Access Covers The easy way to see what s underneath! For all horizontal access solutions - talk to Bilco! Bilco Floor Access Covers Bilco floor access covers are designed to provide convenient, direct
Tubular. Photoelectric Sensors BOS 18M. ea qa. qb wb eb qb wb eb rb eb
Metal Rugged Balluff 18M photoelectric sensors feature an epoxy filled rugged metal 18mm tubular body designed to survive in tough applications where other photoelectric sensors fail. The 18M body style,
Sincerely, Your Partners at Specified Fittings
N E S E S Washington Location 164 W. Smith Rd. Bellingham, WA 98226-9616 360-398-7700 360-398-7051 Fax Mailing Address Montana Location 483 Airport Rd. Stevensville, MT 59870-6363 406-777-3466 406-777-7181
Declaration of performance (DOP)
Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 002 DOP 2013-06-17 Multi-wall chimney system type DW-KL according to 2. Type, batch or serial number or any
Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart
Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance
62GB. Amphenol Series 62GB. Applications. Features
Applications Features 62GB Amphenol 62GB Series connectors are built to British Standard Specification BS 9522 F00 17 which is similar to US military specification MIL-DTL-26482. They are machined from
CONNECTORS VHP UNIONS LOW PRESSURE UNIONS THREADED ADAPTERS BARBED ADAPTERS PAGE 36 PAGE 40 PAGE 48 PAGE 58.
34 CONNECTORS VHP UNIONS PGE 36 LOW PRESSURE UNIONS PGE 40 THREDED DPTERS PGE 48 RED DPTERS PGE 58 SEE STRRED PRODUCTS FOR TOP SELLERS! Connectors Reference CONNECTORS 35 Connectors Reference Chart This
Insertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
Tech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
TASK-LINE GASKETS. The original is still the best.
2 TASK-LINE GASKETS The original is still the best. TASK-LINE ADVANTAGES Maximum protection Zero corrosion rate No retorquing after installation Blowout protection No fabrication or waste Reusable Non-porous
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Electronic pressure switch with display Model PSD-4
Electronic pressure measurement Electronic pressure switch with display Model PSD-4 WIKA data sheet PE 81.86 Applications Machine tools Hydraulics and pneumatics Pumps and compressors Special-purpose machine
3", 4"and 5" Adjustable Angle Industrial Thermometers Maximum utility for installation Head can be rotated 360 Stem positioning over 180
3", 4"and 5" Adjustable Angle Industrial Thermometers Maximum utility for installation Head can be rotated 360 Stem positioning over 180 Heavy Duty design, with versatile case and stem that can be adjusted
ContainTech Polypropylene Dimensional Data Expertise in Engineered Plastics Dated
ContainTech Dimensional Data Expertise in Engineered Plastics Dated 3-17-11 Table of Contents Cap... 23 Clean Out... 22 Combo Lateral ( Sanaitry Tee)... 16 Elbow: 90... 9 Elbow: 45... 10 End Seal... 3