Bevel Seat. Excellence and quality are best achieved through teamwork and a shared vision. At THOMSEN. we strive to:

Transcription

1 BEVEL SEAT FITTINGS

2 Bevel Seat For over 60 years, L. C. Thomsen has been supplying high quality products to the dairy, food and beverage industry. When you think of THOMSEN, three words come to mind: excellence, quality and teamwork. Excellence and quality are best achieved through teamwork and a shared vision. At THOMSEN we strive to: Manufacture the finest quality sanitary equipment in the marketplace. Deliver on time. Concentrate on customer care. Provide the lowest cost possible. These widely used sanitary fittings are manufactured from both T-304 and T-316 stainless steel. It is a union-nut assembly with sanitary acme threads. Bevel seat fittings provide a secure sanitary joint, fully approved and meeting 3A Standards. Bevel seat fittings are available in 1 through 4 sizes and they are available in a variety of finishes. When you need sanitary fittings, there is only one name to remember. THOMSEN, the trusted name for sanitary fittings, pumps and valves for the dairy, food and beverage industries for over 60 years. 3A authorized

3 BEVEL SEAT FIT- 90 SWEEP ELL 2C SWEEP ELL 2E SWEEP ELL 2F CONCENTRIC REDUCING ELL 2F x x x x x x x x x Bevel Seat - 1

4 BEVEL SEAT FITTINGS 2F ECCENTRIC REDUCING ELL x x x x x x x x x CODES: OA 12:00 OB 3:00 OC 6:00 OD 9:00 2K 45 SWEEP ELL P 45 SWEEP ELL TEE Bevel Seat - 2

5 BEVEL SEAT FIT- TINGS TEE C A TEE C B CROSS CROSS C 9A Bevel Seat - 3

6 BEVEL SEAT FITTINGS 13 H HEX NUT A PLAIN TUBE FERRULE AHR RUBBER HOSE ADAPTER REDUCING SIZES AVAILABLE UPON REQUEST 14 AHT TYGON HOSE ADAPTER REDUCING SIZES AVAILABLE UPON REQUEST Bevel Seat - 4

7 BEVEL SEAT FIT- TINGS HOSE CLAMP PART NO. SIZE PART NO. SIZE T14 HC PLAIN RECESSLESS FERRULE 14 R PLAIN FERRULE TANK SPUD (HEAVY WALL) C W PLAIN FERRULE TANK SPUD (LIGHT WALL) WL Bevel Seat - 5

8 BEVEL SEAT FITTINGS 14 WS PLAIN FERRULE WELD A THREADED TUBE FERRULE AHR RUBBER HOSE ADAPTER *SAME AS I.D. OF HOSE 15 R THREADED RECESSLESS FERRULE Bevel Seat - 6

9 BEVEL SEAT FIT- TINGS THREADED FERRULE TANK SPUD (HEAVY WALL) C 15 W THREADED FERRULE TANK SPUD (LIGHT WALL) WL THREADED FERRULE WELD WS CAP 16 A ALSO AVAILABLE AS 23 B THERMOMETER CAP TAPPED N.P.T. Bevel Seat - 7

10 BEVEL SEAT FITTINGS 21 PIPE ADAPTER MALE SANITARY ACME THREAD TO MALE NPT * x x x x x x *May vary in length X x x x x x x x x F PIPE ADAPTER HEX NUT TO MALE NPT * *May vary in length 22 PIPE ADAPTER MALE SANITARY ACME TO FEMALE NPT * x *May vary in length x x x x x x x x Bevel Seat - 8

11 BEVEL SEAT FIT- TINGS PIPE ADAPTER HEX NUT TO FEMALE NPT * F *May vary in length CONCENTRIC RECESSLESS REDUCING FERRULE x x x x x x x x x CONCENTRIC TAPER REDUCER MALE SANITARY ACME TO HEX NUT x x x x x x x x x R 31 TP CONCENTRIC TAPER REDUCER MALE SANITARY ACME BOTH ENDS x x x x x x x x x TT Bevel Seat - 9

12 BEVEL SEAT FITTINGS 31 WS CONCENTRIC REDUCING WELD FERRULE C x x x x x x x x x F CONCENTRIC TAPER REDUCER NUT BOTH ENDS x x x x x x x x x F CONCENTRIC TAPER REDUCER PLAIN FERRULE TO MALE ACME THREAD x x x x x x x x x Bevel Seat - 10

13 BEVEL SEAT FIT- TINGS CONCENTRIC TAPER ADAPTER NUT TO FEMALE NPT 31-18F * x x x x x x x x x *May vary in length CONCENTRIC TAPER ADAPTER NUT TO MALE NPT 31-19F * x x x x x x x x x *May vary in length ECCENTRIC TAPER REDUCER MALE ACME TO NUT 32 TP x x x x x x x x x Bevel Seat - 11

14 BEVEL SEAT FITTINGS 32 WS ECCENTRIC REDUCING WELD FERRULE C x x x x x x x x x F ECCENTRIC TAPER REDUCER NUT BOTH ENDS x x x x x x x x x F ECCENTRIC TAPER REDUCER PLAIN FERRULE TO MALE ACME x x x x x x x x x Bevel Seat - 12

15 BEVEL SEAT FIT- TINGS GASKET BS PART NO. TUBE SIZE 3360-* * * * * *0 4 *AVAILABLE IN BUNA, VITON AND TEFLON 40 BS GASKET BS (HEAVY DUTY) PART NO. TUBE SIZE 3360-*X *X *X *X *X *X 4 *AVAILABLE IN BUNA, VITON AND TEFLON 40 BSB Bevel Seat - 13

16 JOHN PERRY FITTINGS 14A JP PLAIN TUBE FERRULE JP W JP PLAIN FERRULE TANK SPUD (HEAVY WALL) JP C WL JP PLAIN FERRULE TANK SPUD (LIGHT WALL) JP WS JP PLAIN FERRULE WELD JP Bevel Seat - 14

17 JOHN PERRY FIT- TINGS THREADED TUBE FERRULE JP 15A JP THREADED FERRULE TANK SPUD (HEAVY WALL) JP 15W JP C THREADED FERRULE TANK SPUD (LIGHT WALL) JP 15WL JP THREADED FERRULE WELD JP 15WS JP Bevel Seat - 15

18 JOHN PERRY FITTINGS 16A JP CAP JP JP GASKET JP AVAILABLE IN BUNA, VITON AND TEFLON Bevel Seat - 16

19 CLAMP FITTINGS

20 Clamp Fittings For 60 years, L. C. Thomsen has been supplying high quality products to the dairy, food and beverage industry. When you think of THOMSEN, three words come to mind: excellence, quality and teamwork. Excellence and quality are best achieved through teamwork and a shared vision. At THOMSEN we strive to: Manufacture the finest quality sanitary equipment in the marketplace. Deliver on time. Concentrate on customer care. Provide the lowest cost possible. These widely used sanitary fittings are manufactured from both T-304 and T-316 stainless steel. It is a quick-couple assembly with a molded gasket, two flanged ferrules and a clamp. THOMSEN clamp fittings provide a secure sanitary joint, fully approved and meeting 3A Standards. THOMSEN clamp fittings are available in 1 through 4 sizes and they are available in a variety of finishes. When you need sanitary fittings, there is only one name to remember. THOMSEN, the trusted name for sanitary fittings, pumps and valves for the dairy, food and beverage industries for over 60 years. 3A authorized

21 CLAMP FITTINGS 90 ELL TS/2C NOTE: ONE INCH FITTINGS USE 1 1 2" CLAMP ASSEMBLIES 90 ELL TS/2F ELL TS/2F ELL TS/2C x x x x x x x x x 3 5 Clamp - 1

22 CLAMP FIT- TINGS TS/31-2C 90 ADAPTER REDUCING CONCENTRIC x x x x x x x x x TS/31-2F 90 ADAPTER REDUCING CONCENTRIC CAPTIVE NUT x x x x x x x x x TS/2F ADAPTER REDUCING CONCENTRIC x x x x x x x x x Clamp - 2

23 CLAMP FITTINGS 45 ELL TS/2K NOTE: ONE INCH FITTINGS USE 1 1 2" CLAMP ASSEMBLIES TEE TS/7 REDUCING TEE C x x x x x x x TS/7R CROSS TS/9 Clamp - 3

24 CLAMP FIT- TINGS TS/13H CLAMP HEAVY DUTY PART NO. A TUBE SIZE TS/14A FERRULE TS/14AHR RUBBER HOSE ADAPTER REDUCING SIZES AVAILABLE UPON REQUEST * SAME AS I.D. OF HOSE TS/14AHT TYGON HOSE ADAPTER REDUCING SIZES AVAILABLE UPON REQUEST Clamp - 4

25 CLAMP FITTINGS FERRULE RECESSLESS TS/14R TANK FERRULE HEAVY WALL C TS/14W TANK FERRULE LIGHT WALL TS/14WL Clamp - 5

26 CLAMP FIT- TINGS TS/14WS WELDING FERRULE SHORT TS/16A CAP TS/17-14 ADAPTER COUPLING CLAMP TO PLAIN SEE SPECIALS SECTION FOR OTHER TS/17-15 ADAPTER COUPLING CLAMP TO THREAD SEE SPECIALS SECTION FOR OTHER Clamp - 6

27 CLAMP FITTINGS ADAPTER CLAMP TO MALE NPT x x x x x x x x x x SANITARY END LISTED FIRST *May vary in length TS/21 ADAPTER CLAMP TO FEMALE NPT x x x x x x x x x x SANITARY END LISTED FIRST *May vary in length TS/22 THERMOMETER CAP 2370-OC OD OC OE OE OE OE TS/23B Clamp - 7

28 CLAMP FIT- TINGS TS/31R CONCENTRIC REDUCER FERRULE RECESSLESS x x x x x x x x x TS/31W CONCENTRIC REDUCER FERRULE WELD C x x x x x x x x x x x TS/32R ECCENTRIC REDUCER FERRULE RECESSLESS x x x x x x x x x Clamp - 8

29 CLAMP FITTINGS ADAPTER REDUCING CONCENTRIC PLAIN TO CLAMP x x x x x x x x x TS/14 ADAPTER REDUCING CONCENTRIC CLAMP TO CLAMP x x x x x x x x x x x TS/31-14 ADAPTER REDUCING CONCENTRIC CLAMP TO PLAIN TS/31-14A x x x x x x x x x Clamp - 9

30 CLAMP FIT- TINGS TS/31-15 ADAPTER REDUCING CONCENTRIC CLAMP TO THREAD x x x x x x x x x TS/31 ADAPTER REDUCING CONCENTRIC THREAD TO CLAMP x x x x x x x x x TS/14 ADAPTER REDUCING ECCENTRIC PLAIN TO CLAMP x x x x x x x x x Clamp - 10

31 CLAMP FITTINGS ADAPTER REDUCING ECCENTRIC CLAMP TO CLAMP x x x x x X X x x TS/32-14 ADAPTER REDUCING ECCENTRIC CLAMP TO PLAIN TS/32-14A x x x x x X X x x ADAPTER REDUCING ECCENTRIC CLAMP TO THREAD x x x x x X X x x TS/32-15 Clamp - 11

32 CLAMP FIT- TINGS 15-TS/32 ADAPTER REDUCING ECCENTRIC THREAD TO CLAMP x x x x x X X x x TS/40H GASKET B, -E, -T, -V, -S B, -E, -T, -V, -S B, -E, -T, -V, -S B, -E, -T, -V, -S B, -E, -T, -V, -S B, -E, -T, -V, -S B, -E, -T, -V, -S AVAILABLE IN BUNA, EPDM, TEFLON, SILICONE AND VITON Clamp - 12

33 SANITARY BUTT-WELD FITTINGS

34 Sanitary Butt-Weld For over 60 years, L. C. Thomsen has been supplying high quality products to the dairy, food and beverage industry. When you think of THOMSEN, three words come to mind: excellence, quality and teamwork. Excellence and quality are best achieved through teamwork and a shared vision. At THOMSEN we strive to: Manufacture the finest quality sanitary equipment in the marketplace. Deliver on time. Concentrate on customer care. Provide the lowest cost possible. These widely used sanitary fittings are manufactured from both T-304 and T-316 stainless steel. Flush joint, butt-welded fittings allow full and unrestricted flow and are available with bevel seat or clamp ends. Sanitary buttweld fittings provide a secure sanitary joint, fully approved and meeting 3A Standards. Sanitary butt-weld fittings are available in 1 through 4 sizes and they are available in a variety of finishes. When you need sanitary fittings, there is only one name to remember. THOMSEN, the trusted name for sanitary fittings, pumps and valves for the dairy, food and beverage industries for over 60 years. 3A authorized

35 SANITARY BUTT-WELD FITTINGS 90 ELL S2S ELL S2T ELL S2C ELL S2F Butt weld - 1

36 SANITARY BUTT-WELD FITTINGS S2WWC 90 INSPECTION ELL AVAILABLE IN NO. 7 FINISH ONLY S2KS 45 ELL S2KC 45 ELL S2KT 45 ELL Butt weld - 2

37 SANITARY BUTT-WELD FITTINGS 45 ELL S2KP TEE S7WWW TEE REDUCING C S7RWWW x x x x x x TEE C S7WWT Butt weld - 3

38 SANITARY BUTT-WELD FITTINGS S7WWC C TEE S7WTW C TEE S7WCW C TEE S7WTT TEE Butt weld - 4

39 SANITARY BUTT-WELD FITTINGS TEE S7WCC TEE C S7TTW TEE C S7CCW CROSS S9WWWW Butt weld - 5

40 SANITARY BUTT-WELD FITTINGS S31W REDUCER CONCENTRIC x x x x x x x x x 3 4 S31E REDUCER CONCENTRIC ENDS TANGENT x x x x x x x x x S32W REDUCER ECCENTRIC x x x x x x x x x 3 4 Butt weld - 6

41 SANITARY BUTT-WELD FITTINGS REDUCER ECCENTRIC ENDS TANGENT S32E x x x x x x x x x REDUCER CONCENTRIC PLAIN TO WELD x x x x x x x x S31P REDUCER CONCENTRIC CLAMP TO WELD x x x x x x x x S31C Butt weld - 7

42 SANITARY BUTT-WELD FITTINGS S31PE REDUCER CONCENTRIC PLAIN TO TANGENT x x x x x x x x S31CE REDUCER CONCENTRIC CLAMP TO TANGENT x x x x x x x x S32P REDUCER ECCENTRIC PLAIN TO WELD x x x x x x x x Butt weld - 8

43 SANITARY BUTT-WELD FITTINGS REDUCER ECCENTRIC CLAMP TO WELD x x x x x x x x S32C REDUCER ECCENTRIC PLAIN TO TANGENT x x x x x x x x S32PE REDUCER ECCENTRIC CLAMP TO TANGENT x x x x x x x x S32CE Butt weld - 9