P ipe BRASS BRASS FITTINGS PIPE. Actual outside diameters of pipe threads. Actual Male Thread Profiles

Transcription

1 RSS FITTINGS Pipe PIPE RSS For ronze & Larger sizes see pages For SPT/ SPP see pages 112,113 P ipe Size 1/16 1/ 8 1/ 4 3/ 8 1/ 2 3/ 4 1 T hread Size e 1/ /8-27 1/4-18 3/8-18 1/2-14 3/4-14 1/ -11 Workin orking g Pressur ressure e T hread OD 1/ 4 3/ 8 1/ 2 5/ 8 3/ / Typical pplication Grease, fuels, LP and Natural gas (available on special order), refrigeration, instrumentation and hydraulic systems. Conformance Meets specifications and standards of S, SME and SE. Pressure Operating pressure up to 1200 PSI. Vibration Fair resistance. Temperature Range F to F (-53 0 C to C). Material C360 rass for arstock fittings. C377 rass for forged fittings. Used With rass, bronze, copper, steel, aluminum and iron pipe. Tolerance +/-.02 on all dimensions. Dimension Data can change without notice. Please call us when dimensions are critical. ctual outside diameters of pipe threads L at the end of a Part# means Light Pattern - these fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. ssembly Instructions 1- Tighten approximately 2-1/2 turns past hand tight. 2- Fittings with Everseal tighten two turns past hand tight. rittle materials require special cautions. for larger sizes see bronze fittings on page 190 see page 240 for plastic pipe fittings. ctual Male Thread Profiles Fax: sales@global-hose.com 1

2 PIPE RSS FITTINGS RSS 2200P FEMLE ELOW Part # Thread Size NPTF pprox. SE# / / / / / P E7 100F FORGED FEMLE ELOW Part # Thread size NPTF ody Width pprox / / / / / /4 x 1/ /8 x 1/ /2 x 3/ P EZ P FEMLE ELOW UNION TEE C UNION FORGED TEE Part # Thread size NPTF pprox / / SE# Part # Thread size NPTF C pprox / / / / / P LT7 101F 101 Part # Thread size NPTF & ody Width pprox / / / / / Phone:

3 RSS FITTINGS PIPE REDUCING FORGED TEES Part # 1 NPT 2 NPT 3 NPT & ody Width pprox /8 1/8 1/ /4 1/4 1/ /4 1/4 3/ /8 3/8 1/ /8 1/4 3/ /8 3/8 1/ /2 1/2 3/ /4 1/2 3/ /4 3/4 1/ RSS CROSS 2205P E Part # Thread size NPTF pprox / / / / / FORGED CROSS C F 102 Part # Thread size NPTF ody Width pprox / / / / COUPLING SE# P H 103 Part # Thread size pprox. NPTF L 1/ / L 1/ / L 3/ / L 1/ / L 3/ / /16" available (28-057) - POR * For larger sizes, see bronze couplings on pg. 196 Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 3

4 Pipe PIPE RSS FITTINGS REDUCING COUPLING SE# RSS P "L" Pattern Part # Thread size pprox. NPTF L 1/4 x 1/ /4 x 1/ /8 x 1/ L 3/8 x 1/ /8 x 1/ * 1/2 x 1/ L 1/2 x 1/ /2 x 1/ L 1/2 x 3/ /2 x 3/ * 3/4 x 3/ * 3/4 x 1/ *Not to SE specs UNION P Part # Thread size pprox. NPTF / / / / CP P Part # Thread size pprox. NPTF / / / / / STREET ELOW C 2202P Regular Pattern C SE# Part # Thread size NPTF C pprox / S 1/8 short / S 1/4 short / / / "S" = Short Pattern Phone:

5 RSS FITTINGS PIPE Pipe FORGED 90 STREET ELOW 5E8 1202P 116F 116 Flats Part # Thread size NPTF Wrench Flats pprox / / / / / RSS FORGED REDUCING 90 STREET ELOW Part # Thread size Wrench pprox. NPTF FxM flats Flats /8 x 1/ * 1/4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /2 x 3/ *arstock PIPE SWIVEL 90 STEET ELOW Part # Thread size pprox. NPTF / HEX USHING SE# Part # Thread size pprox. NPTF MxF L 1/4 x 1/ /4 x 1/ /8 x 1/ L 3/8 x 1/ /8 x 1/ L 1/2 x 1/ /2 x 1/ L 1/2 x 1/ /2 x 1/ L 1/2 x 3/ /2 x 3/ /4 x 1/ L 3/4 x 1/ L 3/4 x 3/ L 3/4 x 1/ /4 x 1/ P x 1/ x 3/ x 1/ x 3/ Fax: sales@global-hose.com 5

6 Pipe PIPE RSS FITTINGS RSS FCE USHING Part # Thread size pprox. NPTF MxF /4 x 1/ /8 x 1/ /8 x 1/ /2 x 1/ /2 x 1/ /2 x 3/ /4 x 1/ /4 x 3/ /4 x 1/ SQURE HED PLUG P Part # Thread size pprox. NPTF / / / / / COUNTERSUNK HEX PLUG P 109CS 118 SLOTTED-HED PLUG 220P SE J531 Socket Size Part # Thread size NPTF Socket size pprox / / / / / / /8 Taper (flush) & countersunk square available upon request Part # Thread size pprox. NPTF / / / CORED HEX PLUGS 218P PPH 218P Part # Thread size pprox. NPTF / / / / / Phone:

7 RSS FITTINGS PIPE Pipe SOLID HEX HED PLUGS 121S Part # Thread size pprox. NPTF S 1/ S 1/ S 3/ S 1/ S 3/ S RSS LOCKNUT Jam Nuts Straight pipe thread 210P Part # Thread size NPSM Thickness pprox / / / / CLOSE NIPPLE PN Part # Thread size pprox. NPTF / / / / / LONG NIPPLE PNL NOTE: For longer lengths and larger diameters, see our red brass nipples section, pg Part # Thread size pprox. NPTF Length / / / / / / / / / / / / / / / / Fax: sales@global-hose.com 7

8 Pipe PIPE RSS FITTINGS RSS HEX NIPPLE 216P H 122 SE# Part # Thread size NPTF pprox L 1/ / L 1/ / L 3/ / L 1/ / / REDUCING HEX NIPPLE 216P H STREET ELOW P 224 C SE# Part # Thread size pprox. NPTF L 1/4 x 1/ /4 x 1/ L 3/8 x 1/ /8 x 1/ L 3/8 x 1/ /8 x 1/ L 1/2 x 1/ /2 x 1/ L 1/2 x 3/ /2 x 3/ /4 x 1/ /8" x 1/16" available (28-218) - POR SE# Part # Thread size NPTF C pprox / / / / / FORGED STREET ELOW 45E8 124 Part # Thread size NPTF Wrench flats pprox / / / Flats 8 Phone:

9 RSS FITTINGS PIPE Pipe STREET TEE/ SERVICE TEE P C SE# Part # Thread size C pprox. NPTF / / / / / RSS FORGED STREET TEE 107 T8 127 Part # Thread size NPTF ody Width pprox / / / / / EXTENDER DPTER SE# Part # Thread size pprox. NPTF FxM L 1/8 x 1/ /8 x 1/ L 1/4 x 1/ /4 x 1/ L 1/4 x 1/ /4 x 1/ /8 x 1/ L 3/8 x 1/ /8 x 1/ L 3/8 x 3/ /8 x 3/ P L 1/2 x 1/4 1/2 x 3/ /2 x 3/ R /2 x 1/ H /4 x 3/ /4 x 1/ /4 x 3/ PIPE SWIVEL DPTER Part # Thread size NPTF FxM 1 2 pprox / / R 3183 Fax: Turning Swivels SWIVEL FITTING Male NPT x Female NPT Part # Size / sales@global-hose.com 9

10 RSS Pipe PIPE FORGED 90 MLE ELOW LE MF RSS FITTINGS Part # Thread size ody pprox. NPTF Width / / / / FORGED 90 MLE REDUCING ELOW Part # Thread size NPTF ody Width pprox /4 x 1/ /8 x 1/ /2 x 3/ MLE RNCH TEE SE# T9 X P C Part # Thread size NPTF C pprox / / / / / FORGED MLE RNCH TEE Part # Thread size ody pprox. NPTF Width F 1/ F 1/ T9 Man's mind stretched to a new idea never goes back to its original dimensions - Oliver Wendell Holmes 10 Phone:

11 RSS FITTINGS PIPE Pipe FORGED LL MLE TEE Part # Thread size NPTF ody Width pprox / / / / / RSS T12 M101 LONG STREET ELLS D.O.T. pproved Part # Thread size pprox. NPTF /8 1-3/ /8 1-7/ /8 1-11/ /8 1-7/ /4 1-3/ /4 1-7/ /4 1-11/ /4 2-1/ /8 1-3/ LONG EXTENSION DPTERS D.O.T. pproved NEW Part # Thread size pprox. NPTF /8 1-1/ /8 1-3/ / /4 1-9/ /4 1-13/ /4" 1-7/8" /4 2-1/ Dimension data can change without notice. Please call us when dimensions are critical. Lead Free fittings available on pgs Fax: sales@global-hose.com 11

12 ULKHED/ NCHOR FRME COUPLINGS RSS FITTINGS ULKHED / NCHOR / FRME COUPLINGS RSS Terminal olts/ Frame Part # C Length (in.) /8-27 NPTF 5/8-18 UNS / /4-18 NPTF 3/4-16 UNS / /4-18 NPTF 3/4-16 UNS / * 1/4-18 NPTF 3/4-16 UNS / /8-18 NPTF 1-14 UNS / /2-14 NPTF 1-1/8-14 UNS / * Same as except with a larger mounting nut. C /4-18 NPTF 1-14 UNS 1/2-14 NPTF 2-1/ /8-18 NPTF 1-14 UNS 1/2-14 NPTF 1-11/ /8-18 NPTF 1-14 UNS 1/2-14 NPTF 1-29/ C /4-18 NPTF 3/4-16 UNS 1/2-14 NPTF 1-11/ * 1/4-18 NPTF 3/4-16 UNS 1/2-14 NPTF 2-5/ * Steel C C /4-18 NPTF 1-14 UNS 1/2-14 NPTF 2-7/ /4-18 NPTF 1-14 UNS 1/2-14 NPTF C /8-18 NPTF 1-14 UNS 1/2-14 NPTF 1-7/ /2-14 NPTF 1-14 UNS 1/2-14 NPTF 2-3/ C /2-O.D. Tube 7/8-20 UNCF 3/8-18 NPTF 1-5/ /8-O.D. Tube 7/8-20 UNCF 3/8-18 NPTF 1-3/ C /8-18 NPTF 7/8-20 UNCF 3/8-18 NPTF 2-5/ CROSSOVER NUMERS : 207x2 207CH-2 CH &1/ : x4 392C-94 CHS S 129S : 392C-1&1/ x L CH CH : 129-C 392E-1&5/ x6 CH CH : x8 129-D 1351 CH CH F-1&1/ : : S : DC L : M : : Phone:

13 RSS FITTINGS ULKHED/ NCHOR/ FRME COUPLINGS Pipe ULKHED / NCHOR / FRME COUPLINGS Terminal olts/ Frame Part # C Length (in.) RSS STEEL ULKHED FITTINGS /4-18 NPTF 3/4-16 UNS /4-18 NPTF 3/4-16 UNS C /4-18 NPTF 3/4 - UNS 1/2-14 NPTF Crossover #: S FC /4-18 NPTF 3/4 - UNS 1/2-14 NPTF C C /4-18 NPTF 1-14 UNS 1/2-14 NPTF MRINE ULKHED FITTINGS /16 Hose ID /8 Hose ID NEW ULKHED JM NUTS Part # Size Material QTY Weight J 3/4-16UNEF rass ea J 7/8-20UNEF rass ea J 1-14UNS rass ea J 1-1/8-14UNS rass ea NEW ULKHED LOCK WSHERS Part # Size Material QTY Weight W 3/4" Steel per W 7/8" Steel per W 1" Steel per W 1-1/8" Steel per Lead Free fittings available on pgs Fax: sales@global-hose.com 13

14 RSS HOSE R Hose arb Fittings RSS FITTINGS Temperature and Working Pressure Ranges From F to F at 150 PSI maximum. Tolerance +/-.02 on all dimensions. Dimension Data can change without notice. Please call us when dimensions are critical. Material C360 rass for arstock fittings. C377 rass for Forged fittings. ssembly Instructions 1- Cut hose cleanly and squarely to length. 2- Slide clamp on hose. 3- Lubricate hose. Push hose on fitting until hose bottoms against stop ring or hex. 4- Position hose clamp as shown below and secure with a screwdriver or wrench. Maintain dimension noted below for proper clamp positioning. Note: These fittings are intended for use with hose clamp, similar type clamp or a crimped ferrule. See page 288 for hose ferrules See page for hose clamps See page for plastic hose barb fittings See page 26 for stainless steel hose barbs Stainless Steel hose barbs for beverage service available - See beverage fitting section, pg. 311, 312 ctual Profile of Hose arbs Hose Size 3 /16" 1/4" 1 /4" 1/4" 5 /16" 1/4" 3 /8" 1/8" 1 /2" 1/8" 5 /8" 1/8" 3 /4" 1/8" 14 1/2" 3/8" 5/16" 1/8" 3/16" 1/4" 5/8" 3/4" 1" Phone:

15 RSS FITTINGS HOSE R RIGID MLE DPTER PGH HL KF-PS MP Part # Hose I.D. x Male NPTF pprox /8 x 1/ /8 x 1/ /8 x 1/ /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ /16 x 1/ /16 x 1/ /16 x 3/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /16 x 1/ /2 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /2 x 3/ /2 x /8 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /8 x /4 x 3/ /4 x 1/ /4 x 3/ /4 x x 1/ x 3/ x /4" x 3/4" /4 x RSS * See ronze insert fittings on pages 265,266 for larger sizes. For Stainless arb Fittings see pg. 26 or beverage section, pg. 311 Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 15

16 HOSE R RSS FITTINGS RSS RSS RIGID MLE SPT R DPTER Part # Hose I.D. x SPT /4" x 1/8" /4" x 1/4" /8" x 1/4" /8" x 3/8" /8" x 1/2" /2" x 3/8" /2" x 1/2" /4" x 3/4" " x 1" SWIVEL MLE DPTER Part # Hose I.D. x pprox. Male NPTF /8 x 1/ /2 x 3/ /2 x 1/ SMS Rotation /4 x 3/ Part # Hose I.D. x Male NPTF pprox /4 x 1/ /8 x 3/ MENDER/ SPLICER MS 122HL HM O.D. NEW Part # Hose I.D. x Hose I.D. O.D. pprox / / / /4" x 1/8" / /16" x 1/4" /8" /8" x 1/4" / /2" x 3/8" / /8" x 3/8" / /4" x 1/2" " See ronze insert fittings on page 266 for larger sizes. See Hose Clamps on page For Stainless arb Fittings see pg. 26 or beverage section, pg. 311 Dimension data can change without notice. Please call us when dimensions are critical. 16 Phone:

17 RSS FITTINGS HOSE R RIGID FEMLE DPTER F 126H 126 FP KF-RS 104 Part # Hose I.D. x Female NPTF pprox /8 x 1/ /8 x 1/ /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /4" x 1/2" /16 x 1/ /16 x 1/ /16 x 3/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /8" x 3/4" /2 x 1/ /2 x 3/ /2 x 1/ /2" x 3/4" /8" x 3/8" /8" x 1/2" /8" x 3/4" /4" x 1/2" /4 x 3/ x 3/ " x 1" /4" x 1" RSS SWIVEL FEMLE DPTER NPTF NEW Part # Hose I.D. x Female NPTF pprox /4" x 1/4" /8" x 1/4" /8" x 3/8" /2" x 3/8" /2" x 1/2" Lead Free fittings available on pgs Fall Seven times, stand up eight. - Japanese Proverb Fax: sales@global-hose.com 17

18 RSS HOSE R SWIVEL FEMLE DPTER - With Gasket NPSM Thread Part # National Pipe Straight Gasket Seal Swivel FSG KF-RN NPSM Gasket RSS FITTINGS Hose I.D. x Female NPSM pprox /8" x 1/8" /16" x 1/8" /16" x 1/4" /4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 3/ /2 x 1/ /2 x 3/ /8 x 3/ /4 x 3/ FORGED HOSE R 90 ELOW Part # 129 HE1 KF-PS90 HE-1 29E 139 C Grooved End arb Square ody Hose I.D. x Male NPTF C ody Size pprox /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ * 1/4 x 3/ /16 x 1/ /16 x 1/ /16 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ ** 5/8 x 3/ ** 5/8 x 1/ /8 x 3/ *** 3/4 x 1/ /4 x 3/ *** 3/4 x x 3/ " x 1" * arstock ** Grooved End arbs *** Square ody See ronze insert fittings on page 266 for larger sizes. Dimension data can change without notice. Please call us when dimensions are critical. 18 Phone:

19 RSS FITTINGS HOSE R RSTOCK HOSE R 90 ELOW C Part # Hose I.D. x Male NPTF C ody Size pprox /16 X 1/ /4 X 1/ /4 X 1/ /8 X 1/ /8 X 3/ /2 X 3/ RSS 129H HOSE R TEES ody Size NEW NEW NEW Part # Hose arb Size ody Size pprox / /16" / /4" x 1/8" / / / /2" x 3/8" /8" /4" /4" x 1/2" /8 H x 1/4 MIP * See ronze insert fittings on page 265 for larger sizes. 90 HOSE R ELOW Part # Hose I.D. x Hose I.D. ody Size ody Size pprox. Wt. Lbs /8" x 1/8" /16" x 3/16" /4 x 1/ /4 x 1/ /16" x 5/16" /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /8" x 5/8" /4" x 1/2" /4" x 3/4" Fax: sales@global-hose.com 19

20 HOSE R RSS FITTINGS RSS 90 FEMLE HOSE R ELOW ody Size Part # Hose I.D. x Female NPTF ody Size pprox /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /4" x 3/4" HOSE R x SWIVEL MLE PIPE ody Size Part # Hose I.D. x Male NPTF ody Size pprox /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ HE H KF-PS ELOW ody Size NEW Part # Hose I.D. x Male NPTF ody Size pprox /4 x 1/ * 1/4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /2" x 1/2" /8 x 3/ /4" x 1/2" * arstock If I have seen further it is by standing on the shoulders of giants. - Isaac Newton 20 Phone:

21 RSS FITTINGS HOSE R LL END SWIVEL NPSM - all seat type 128HLSV 29FS 209S LLSET MLE DPTER eveled seat H 122S LLSET UNION NEW Part # Hose I.D. x pprox. NPSM /8 x 1/ /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 3/ /2 x 1/ /4 x 3/ Part # NPSM x Male NPTF pprox /8 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ /4 x 3/ Part # NPSM x NPSM pprox /8" /4" /8" /2" RSS FEMLE LLSET DPTER NEW Part # NPSM x Female NPTF pprox /4" x 1/4" /8" x 3/8" /2" x 1/2" FLRE DPTER Part # Hose I.D. x 45 Flare F KF-MS Thread pprox /16 x 1/4 7/ /4 x 1/4 7/ /4 x 3/8 5/ /16 x 5/16 1/ /8 x 3/8 5/ /8" x 1/2" 3/ /2" x 1/2" 3/ Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 21

22 HOSE R RSS FITTINGS RSS FEMLE 45 FLRE SWIVEL 29SE 209SF 146HLFSV KF-NS 128 FSS DUL 45 / 37 FLRE SWIVEL Part # Hose I.D. x Female 45 Flare Thread pprox /16 x 3/16 3/ /16 x 1/4 7/ /4 x 1/4 7/ /4 x 5/16 1/ /4 x 3/8 5/ /16 x 5/16 1/ /16 x 3/8 5/ /8 x 3/8 5/ /8 x 1/2 3/ /2 x 1/2 3/ /4" x 3/4" 1-1/ Part # Hose I.D. x Female 45 Flare Thread pprox /4 x 1/4 7/ /16 x 5/16 1/ /8 x 1/2 3/ /2 x 1/2 3/ /2 x 5/8 7/ INVERTED FLRE SWIVEL Part # Hose I.D. x Female 45 Flare Thread pprox /4 x 1/4 7/ /8 x 3/8 5/ /2 x 1/2 3/ /8 x 5/8 7/ FEMLE 37 J.I.C. FLRE SWIVEL Part # Hose I.D. x Female 45 Flare Thread pprox /4 x 3/8 9/ /16 x 3/8 9/ /8 x 3/8 9/ /4" x 3/4" 1-1/ We learn something every day, and lots of times it's that what we learned the day before was wrong ill Vaughan Phone:

23 RSS FITTINGS HOSE R HIGH PRESURE MLE SWIVEL 4065 Part # Hose I.D. x pprox. Male NPTF /8 x 1/ RSS HOSE ID x MLE LL SWIVEL 300 PSI. Max. Working Pressure Part # Hose I.D. x Male ball swivel pprox /4 x 1/ /8 x 1/ /4" MLE THRED ID x OD Reusable Hose Couplings Part # Size 1/4" Male Thread ID x OD Length 1 2 pprox /8 x 3/4 (23/32) /4 x 5/ /4 x 1/ /4 x 9/ /16 x 5/ /8 x 5/ Many more sizes and shapes available...just ask! The secret of being miserable is to have leisure to bother about whether you are happy or not. The cure for it is occupation. - George ernard Shaw eware all enterprises that require new clothes. - Henry David Thoreau Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 23

24 HOSE R RSS FITTINGS RSS STEM ONLY - WELDING HOSE CONNECTOR 201RW WRS WLS Part # Hose I.D. pprox / / / / ssemble with nuts below. RIGHT HND 9/16-18 FOR OXYGEN LINE - WELDING HOSE CONNECTOR 201RW WRS KF-PE 152 Part # Size pprox R.H. Nut only ssemble with stem above. LEFT HND 9/16-18 FOR CETYLENE LINE - WELDING HOSE CONNECTOR 209LW WLS 154 KF-RE Part # Size pprox L.H. Nut only ssemble with stem above. RIGHT HND 9/16-18 #122RW - WELDING HOSE CONNECTOR 156 NEW NEW Part # Size pprox / /8" /16" LEFT HND 9/16-18 #122LW - WELDING HOSE CONNECTOR 158 NEW NEW Part # Size pprox / /8" /16" While I am busy with little things, I am not required to do greater things. - St. Francis de Sales 24 Phone:

25 RSS FITTINGS HOSE R NEW RSS RS FOR POLYETHYLENE TUING Quick connecting fittings that do not require tube preparations for hand assembly. Inexpensive with excellent resistance to vibration. ll sizes are tube O.D. (I.D.) UNION TUE O.D. (TUE I.D.) X TUE O.D. (TUE I.D.) Part # Size /4(1/8) x 1/4(1/8) /8(1/4) x 1/4(1/8) /8(1/4) x 3/8(1/4) 2.30 MLE DPTER TUE O.D. (TUE I.D.) X MLE PIPE Part # Size /4(1/8) x 1/ /4(1/8) x 1/ /4(1/8) x 1/ /8(1/4) x 1/ UNION ELOW TUE O.D (I.D.) Part # Size /4(1/8) /8(1/4) /2(3/8) 7.57 MLE 90 0 ELOW TUE O.D. (I.D.) X MLE PIPE Part # Size /4(1/8) x 1/ /4(1/8) x 1/ /4(1/8) x 1/ /8(1/4) x 1/ /8(1/4) x 1/ /2(3/8) x 3/ FEMLE 90 0 ELOW MLE RNCH TEE O.D. (I.D.) X O.D. (I.D.) X MLE PIPE Part # Size /4(1/8) x 1/4(1/8) x 1/ /8(1/4) x 3/8(1/4) x 1/ /8(1/4) x 3/8(1/4) x 1/ FEMLE RNCH TEE 3 1 O.D. (I.D.) X O.D. (I.D.) X FEMLE PIPE Part # Size /4(1/8) x 1/4(1/8) x 1/ TWO R FITTINGS More Sizes vailable - Please sk! MLE DPTER PIPE RSS NEW FEMLE DPTER TUE O.D. (TUE I.D.) X FEMLE PIPE Part # Size /4(1/8) x 1/ /8(1/4) x 1/ ULKHED UNION 1074 TUE O.D. (TUE I.D.) Part # Size /4(1/8) /8(1/4) TUE O.D. (I.D.) X FEMLE PIPE Part # Size /4(1/8) x 1/ UNION TEE O.D. (I.D.) X O.D. (I.D.) X O.D. (I.D.) Part # Size /4(1/8) /8(1/4)X 3/8(1/4)X1/4(1/8) /8(1/4) /2(3/8)X1/2(3/8)X3/8(1/4) /2(3/8) 9.21 TUE O.D. (I.D.) X MLE PIPE Part # Size /4(1/8) x 1/ /4(1/8) x 1/ /8(1/4) x 1/ UNION TEE Part # Tube O.D. (I.D.) /4(1/8 ID) /8(1/4 ID) ELOW Part # Tube O.D. (I.D.) /4(1/8 ID) /8(1/4 ID) 9.26 Fax: sales@global-hose.com 25

26 RSS 26 HOSE R STINLESS STEEL HOSE RS NOTE: See Stainless Steel Hose arbs for beverage on pg. 311 Phone: Cast 304 STINLESS STEEL HOSE NIPPLES Part # Hose I.D. x Male Pipe /4" /8" /2" /4" " /4" /2" " /2" " STINLESS STEEL REDUCING HOSE NIPPLES Part # Hose I.D. x Male Pipe /4" X 1/8" /8" X 1/4" /2" X 3/8" /2" X 1/4" /4" X 1/2" " X 3/4" " X 1/2" /4" X 1" /2" X 1-1/4" /2" X 1" " X 1-1/2" " X 1-1/4" STINLESS STEEL HOSE NIPPLES Part # Hose I.D. x Male Pipe /4" /8" /2" /4" " /4" /2" " /2" " " Dimension data can change without notice. Please call us when dimensions are critical. RSS FITTINGS 316 STINLESS STEEL MCHINED RIGID MLE DPTER Part # Hose I.D. x NPT SS 1/8" x 1/8" SS 3/16" x 1/8" SS 3/16" x 1/4" SS 1/4" x 1/8" SS 1/4" x 1/4" SS 1/4" x 3/8" SS 5/16" x 1/8" SS 5/16" x 1/4" SS 5/16" x 3/8" SS 3/8" x 1/8" SS 3/8" x 1/4" SS 3/8" x 3/8" SS 3/8" x 1/2" SS 1/2" x 1/4" SS 1/2" x 3/8" SS 1/2" x 1/2" SS 1/2" x 3/4" SS 5/8" x 3/8" SS 5/8" x 1/2" SS 5/8" x 3/4" SS 3/4" x 1/2" SS 3/4" x 3/4" SS 1" x 3/4" STINLESS STEEL SPLICER Part # Hose I.D. x Hose I.D SS 1/4" SS 3/8" SS 1/2" SS 3/4" NEW STINLESS STEEL R ELOW Part # Size SS 1/4 x 1/ SS 1/4 x 1/ SS 3/8 x 1/ SS 3/8 x 3/ SS 1/2 x 1/

27 RSS FITTINGS PUSH ON HOSE R Push On arb Fittings RSS Typical pplication: Low Pressure ir, Fuel, Lube, and Oil Lines Material: C360 rass dvantages: Easy assembly. No clamps needed!! ssembly Instructions 1- Lubricate insert. 150 PSI 2- Hold hose at angle as shown & push on and up over first barb. 3- Continue to push straight on until hose is seated under protective plastic cap. Keep hands back from hose end area so that hose can expand. Disassembling Instructions 1- Split hose as shown above. Do not cut completely through hose. Sealing edge of barb could be damaged. 2- end hose and remove with a quick pull. If a man loves the labour of his trade, apart from any question of success or fame, the gods have called him. - Robert Louis Stevenson ctual Profile of Push On arbs /4" 5/16" 3/8" 1/2" 5/8" 3/4" Fax: sales@global-hose.com 27

28 PUSH ON HOSE R RSS FITTINGS MLE DPTER RSS 301 P990 HLM K-M PO PN Part # Hose I.D. x Male NPTF pprox /4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ x 3/ x For STINLESS PUSH ON FITTINGS see pg. 33 MLE SWIVEL HMS 285 Part # Hose I.D. x Male NPTF pprox /4 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ /4 x 3/ FEMLE GSKET SEL SWIVEL - NPSM 280 Part # Hose I.D. x Gasket Swivel (NPSM) pprox /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /2 x 1/ /4 x 3/ Dimension data can change without notice. Please call us when dimensions are critical. 28 Phone:

29 HOSE SPLICER PM SPO FPO HLF 626 RSS FITTINGS 100-Y K-RM MHL 296 RIGID FEMLE DPTER PUSH ON HOSE R Part # Hose I.D. pprox /4" /16" /8" /2" /8" /4" " For STINLESS see pg. 33 Part # Hose I.D. x Female NPTF pprox /4" x 1/8" /4" x 1/4" /4" x 3/8" /16" x 1/8" /16" x 1/4" /8" x 1/8" /8" x 1/4" /8" x 3/8" /8' x 1/2" /8" x 3/4" /2" x 1/4" /2" x 3/8" /2" x 1/2" /2" x 3/4" /8" x 3/8" /8" x 1/2" /4" x 1/2" /4" x 3/4" " x 3/4" " x 1" RSS MLE ELOW ody 100-C 29EPO 273 Part # Hose I.D. x Male NPTF ody Width pprox /4" x 1/8" /4" x 1/4" /16" x 1/8" /16" x 1/4" /8" x 1/8" /8" x 1/4" /8" x 3/8" /8" x 1/2" /2" x 3/8" /2" x 1/2" /8" x 1/2" /8" x 3/4" /4" x 1/2" /4" x 3/4" Fax: sales@global-hose.com 29

30 PUSH ON HOSE R RSS FITTINGS RSS RIGID TUE DPTER X K-RL MLE SE FLRE DPTER K-MS MLE JIC FLRE DPTER Part # Hose I.D. x O.D Tube pprox /4" x 3/16" /4" x 1/4" /4" x 5/16" /16" x 5/16" /8" x 3/8" /2" x 1/2" /8" x 5/8" /4" x 3/4" Part # Hose I.D. x 45 Male Flare UNF Thread pprox /4" x 1/4" 7/ /4" x 5/16" 1/ /16" x 5/16" 1/ /8" x 5/16" 1/ /8" x 3/8" 5/ /2" x 1/2" 3/ /8" x 5/8" 7/ /4" x 3/4" 1-1/ Part # Hose I.D. x Male JIC UNF Thread pprox /4" x 1/4" 7/ /4" x 5/16" 1/ /4" x 3/8" 9/ /8" x 3/8" 9/ /2" x 1/2" 3/ /8" x 5/8" 7/ /4" x 3/4" 1-1/ SE/JIC DUL 45 /37 FEMLE SWIVEL 29FDS 287 HDF P990-K 305 Part # Hose I.D. x 45 Male Flare UNF Thread pprox /4" x 1/4" 7/ /4" x 5/16" 1/ /16" x 5/16" 1/ /8" x 1/2" 3/ /2" x 1/2" 3/ /2" x 5/8" 7/ /8" x 1/2" 3/ /8" x 5/8" 7/ For STINLESS see pg. 33 or everage Fittings, pg. 311 Dimension data can change without notice. Please call us when dimensions are critical. 30 Phone:

31 RSS FITTINGS PUSH ON HOSE R 45 SE FLRE FEMLE SWIVEL Part # 728 P990-H 29EPO S-4 K-M HSF 684 NEW Hose I.D. x 45 Male Flare UNF Thread pprox /16" x 3/8" 5/ /4" x 1/4" 7/ /4" x 5/16" 1/ /4" x 3/8" 5/ /16" x 5/16" 1/ /16" x 3/8" 5/ /8" x 3/8" 5/ /8" x 1/2" 3/ /2" x 3/8" 5/ /2" x 1/2" 3/ /8" x 5/8" 7/ /4" x 3/4" 1-1/ RSS FEMLE 37 JIC FLRE SWIVEL Part # 29J1CPO HJF P990-F INVERTED FLRE MLE SWIVEL Hose I.D. x UNF pprox. Female JIC Thread /4" x 1/4" 7/ /4" x 3/8" 9/ /16" x 3/8" 9/ /8" x 3/8" 9/ /2" x 1/2" 3/ /8" x 5/8" 7/ /4" x 3/4" 1-1/ For STINLESS see pg. 33 More sizes available K-MF 1MS Part # Hose I.D. x Male INV Flare UNF Thread pprox /4" x 3/16" 3/ /4" x 1/4" 7/ /4" x 5/16" 1/ /16" x 1/4" 7/ /16" x 5/16" 1/ /16" x 3/8" 5/ /8" x 5/16" 1/ /8" x 3/8" 5/ /2" x 3/8" 5/ /2" x 1/2" 3/ /8" x 5/8" 7/ Fax: sales@global-hose.com 31

32 PUSH ON HOSE R RSS FITTINGS RSS INVERTED FLRE FEMLE DPTER K-NG 292 P990-J Part # Hose I.D. x Female INV Flare pprox /4" x 3/16" /4" x 1/4" /4" x 5/16" /16" x 5/16" /8" x 5/16" /8" x 3/8" /2" x 1/2" FEMLE LLSET SWIVEL SPO 731 NPSM Part # Hose I.D. x Female NPSM pprox /4" X 1/8" /4" X 1/4" /4" x 3/8" /8" X 1/4" /8" X 3/8" /2" X 1/2" /2" x 3/4" /4" X 3/4" SE/ JIC 37 / 45 FEMLE SWIVEL 90 ZINC PLTED STEEL 289 Part # Hose I.D. x Female 37 /45 UNF Thread pprox /4" 7/ /8" 9/ * 3/8" 5/ /2" 3/ /4" 1-1/ * SE If you resolve to give up smoking, drinking and loving, you don't actually live longer, it just seems longer. - Clement Freud 32 Phone:

33 RSS FITTINGS STINLESS STEEL PUSH ON HOSE R STINLESS STEEL MLE DPTERS Part # Hose I.D. x NPT pprox SS 1/4" x 1/8" SS 1/4" x 1/4" SS 3/8" x 1/4" SS 3/8" x 3/8" SS 1/2" x 3/8" SS 1/2" x 1/2" SS 3/4" x 1/2" SS 3/4" x 3/4" RSS STINLESS STEEL SE/ JIC 45 / 37 FEMLE SWIVEL Part # Hose I.D. x Female 45 /37 pprox SS 1/4" x 1/4" SS 1/2" x 1/2" STINLESS STEEL FEMLE 37 JIC FLRE SWIVEL Part # Hose I.D. x Female 37 pprox SS 3/8" SS 3/4" STINLESS STEEL HOSE SPLICER Part # Hose I.D. x Tube O.D. pprox SS 1/4" SS 3/8" SS 1/2" NOTE: See Stainless Steel beverage fittings on pg. 311 Fax: sales@global-hose.com 33

34 GRDEN HOSE RSS FITTINGS RSS Garden Hose Fittings Dimension data can change without notice. Please call us when dimensions are critical. See page 260 for Plastic Garden Hose Fittings Temperature and Working Pressure Ranges From F to F at 75 PSI maximum or the recommended working pressure of the garden hose. (Not to exceed 150 PSI.) Note: ll female connector ends should have a rubber washer inserted prior to usage. Male Garden Hose Profile Male garden hose threads are all 3/4 with an outside diameter of and 11-1/2 threads per inch. FGH = Female Garden Hose threads MGH = Male Garden Hose threads.415 ctual Profile of Garden Hose arbs Phone:

35 RSS FITTINGS GRDEN Garden HOSE Hose SWIVEL - MGH X FGH Internal WSHER INCLUDED Part # MGH X FGH pprox /4 x 3/ * * Internal * Not a live swivel RSS SWIVEL - FGH X FGH HUS W GSU 101GHSV 22S 506 FS66 WSHER INCLUDED Part # FGH X FGH pprox /4 x 3/ O.D No Swivel SWIVEL - FGH X FEMLE PIPE WSHER INCLUDED Part # FGH x pprox. Female NPTF /4 x 1/ /4 x 3/ HSU11 91Z 197S 98GHSV 5S F565 RIGID - FGH X FEMLE PIPE WSHER INCLUDED 95GH 501 Part # FGH x pprox. Female NPTF /4 x 1/ /4 x 1/ /4 x 3/ Home is not where you live, but where they understand you. - Christian Morganstern Fax: sales@global-hose.com 35

36 GRDEN HOSE RSS FITTINGS RIGID - FGH X FEMLE PIPE RSS FS HU GH 5 H15PP Part # FGH x pprox. Female NPTF /4 x 1/ /4 x 3/ SWIVEL - FGH X MLE PIPE w/ SCREEN WSHER INCLUDED GH W1 62H4 88GH W1 Part # FGH x pprox. Male NPTF /4 x 1/ /4 x 3/ /4 x 1/ SWIVEL - FGH X MLE PIPE WSHER INCLUDED NEW NEW NEW Part # FGH x pprox. Male NPTF /4" x 1/4" /4" x 3/8" /4 x 1/ /4" x 3/4" RIGID - FGH X MLE PIPE GH 20 HU H7 NEW Part # FGH x pprox. Male NPTF /4" x 3/8" /4 x 1/2 (1/2 SWT)** /4 x 3/ /4 x 3/4 (1/2 FIP) L* 3/4 x 3/ * Long pattern ** 1/2 Swt = 5/8 O.D. 36 Phone:

37 RSS FITTINGS GRDEN HOSE RIGID - MGH X FEMLE PIPE R HU12 H11PP H 81GH MF67 Part # MGH X pprox. Female NPTF /4 x 1/ /4 x 3/ /4 x 1/ /4 x 3/ RSS RIGID - MGH X MLE PIPE 19R 196 H HU22 RIGID - MGH X MGH GH 19 NEW Part # MGH X pprox. Male NPTF /4 x 3/ * 3/4 x 1/ ** 3/4 x 3/4 x 1/ E*** 3/4 x 3/ L Long Pattern S 3/4 x 3/4 Short /4" x 1" No Tap * (1/2 Swt = 5/8 O.D.) ** (Tapped 1/2 FIP) *** (Tapped 1/2 FIP oth ends) GH 23 H8 19R GRDEN HOSE NUT GH GHN1 HNR Fax: NEW Part # MGH X pprox. MGH /4 x 3/4 (1/2" FIP) " x 3/4" Part # Size pprox Knurled O.D Nut Dimension data can change without notice. Please call us when dimensions are critical. sales@global-hose.com 37

38 GRDEN HOSE RSS FITTINGS GRDEN HOSE WSHERS RSS GHW 901GH NEW GRDEN HOSE FILTER WSHER Part # Size Thickness pprox recessed washer black* R red black rubber * plasticized rubber Part # Size pprox Mesh F 60 Mesh L662 GRDEN HOSE CP - Die Cast rass GH GHN5 HC1 L W GRDEN HOSE CP WITH CHIN Part # Size pprox /4 Die Cast arstock Caps available Part # Size pprox /4 w/ 8 Chain * Zinc die cast GRDEN HOSE PLUG Part # Size pprox / Phone:

39 RSS FITTINGS CST RSS HOSE - "Y" CONNECTOR GRDEN HOSE WSHER INCLUDED Part # Size pprox / See more Garden Hose "Y"'s on page 44 RSS 21 QUICK DISCONNECT GRDEN HOSE COUPLERS WSHER INCLUDED Part # Size pprox Complete Female end Male end L73C MLE FLRE X FEMLE HOSE RIGID WH HFU21 MLE FLRE x FEMLE HOSE SWIVEL 50GHSV 51GHSV W H 191 Part # Male Flare pprox. x Female Hose /8 x 3/ /2 x 3/ /8 x 3/ WSHER INCLUDED Part # Male Flare pprox. x Female Hose /4 x 3/ /8 x 3/ * /2 x 3/ * Internal COMPRESSION X FGH WSHER INCLUDED Part # Compression x 1 2 pprox. FGH /4 x 3/ /8 x 3/ Fax: sales@global-hose.com 39

40 GRDEN HOSE RSTOCK RSS GRDEN HOSE COUPLINGS RSS FITTINGS/ STINLESS RSS FEMLE SWIVEL ONLY 22RF 591 GHF KF-RY HU NEW WSHER INCLUDED RSS Part # Hose arb pprox. x FGH /8 x 3/4" /2 x 3/4" /8 x 3/4" /4 x 3/4" " x 3/4" x 1" STINLESS STEEL SS 1/2" x 3/4" SS 5/8" x 3/4" SS 3/4" x 3/4" MLE END ONLY 22RM 590 GHM KF-PY 201GH 193 HU125 NEW RSS Part # Hose arb x pprox. MGH /8 x 3/4" /2 x 3/4" /8 x 3/4" /4 x 3/4" " x 3/4" x 1" STINLESS STEEL SS 1/2" x 3/4" SS 5/8" x 3/4" SS 3/4" x 3/4" GRDEN HOSE COUPLING GHS 92GH 936H 202GHS 22R 592 NEW RSS WSHER INCLUDED Part # Hose arb / / / / "(3/4" threads) STINLESS STEEL SS 1/2" SS 5/8" SS 3/4" Dimension data can change without notice. Please call us when dimensions are critical. 40 Phone:

41 RSS FITTINGS GRDEN HOSE GRDEN HOSE COUPLING - Short Shank Knurled Nut Part # Hose arb x pprox. FGH /2 x 3/4" /8 x 3/4" /4 x 3/4" GRDEN HOSE COUPLING - Short Shank w/ hex Part # Hose x FGH pprox. NEW /2 x 3/4" /8 x 3/4" /4 x 3/4" GRDEN HOSE COUPLING - Short Shank Part # Hose arb pprox. x MGH /2 x 3/4" /8 x 3/4" /4 x 3/4" GRDEN HOSE COUPLING SETS - Short Shank with Knurled Nut Part # Hose arb /2" 9.71 NEW /8" /4" 9.90 RSS GRDEN HOSE COUPLING SETS - Short Shank w/ hex nut Part # Hose arb /2" /8" 8.42 NEW /4" 9.00 ROD RSS - 2" SHNK GHFL 594 ROD RSS - 2" SHNK GHML 593 NEW NEW 2" SHNK GRDEN HOSE COUPLING SETS NEW WSHER INCLUDED Part # Hose arb x pprox. FGH /2 x 3/4" /8 x 3/4" /4 x 3/4" " x 1" Part # Hose arb x pprox. MGH /2 x 3/4" /8 x 3/4" /4 x 3/4" " x 1" Part # Hose x FGH /2" /8" /4" " Fax: sales@global-hose.com 41

42 NPSM GRDEN HOSE RSS FITTINGS RSS NPSM FEMLE SHORT SHNK NEW HEX HED Part # Hose ID NPSM Thread /2 3/4" /8 3/4" /4 3/4" " NPSM MLE SHORT SHNK NEW Part # Hose ID NPSM Thread /2 3/4" /8 3/4" /4 3/4" " NPSM SHORT SHNK SETS NEW Part # Size /2" /8" /4" " NPSM FEMLE LONG SHNK NEW Part # Hose ID NPSM Thread /2 1/2" /8 3/4" /4 3/4" " NPSM MLE LONG SHNK NEW Part # Hose ID NPSM Thread /2 1/2" /8 3/4" /4 3/4" " NPSM LONG SHNK SETS NEW Part # Size /2" /8" /4" " Phone:

43 GRDEN RSS HOSEFITTINGS WROUGHT RSS RSS GRDEN FITTINGS HOSE VLVES WROUGHT RSS - Female end only 85L WSHER INCLUDED Part # Hose arb pprox. x FGH /8 x 3/4" /4 x 3/4" RSS WROUGHT RSS COUPLINGS - Male end only Part # Hose arb x pprox. MGH /2 x 3/4" /8 x 3/4" M GRDEN HOSE VLVES ONE WY RSS LL VLVE - FGH x MGH C Part # FGH x C pprox. MGH /4 x 3/4" ONE WY RSS LL VLVE - Female x 3/4 MGH Pipe C Part # Female NPTF C pprox. x MGH /4 x 3/4" ZINC LLOY HOSE SHUT-OFF W/ ONE LEVER Part # FGH x MGH pprox /4" x 3/4" Fax: sales@global-hose.com 43

44 GRDEN HOSE RSS FITTINGS RSS PLSTIC GRDEN HOSE VLVE CYCOLC ODY & LL Part # FGH x pprox. MGH /4" x 3/4" L45OC PLSTIC, NON-CORROSIVE, 2-WY HOSE SHUT-OFF "Y" Part # Size pprox /4" "Y" SHPE ZINC LLOY CONNECTOR W/ TWO LEVERS Part # Size pprox /4" ZINC LLOY SWIVEL HOSE CONNECTOR Part # Size pprox /4" "Y" Shape rass connector w/ 2-way shut off Part # Size Description pprox /4" 3/4 Double Y valve, swivel inlet Dimension data can change without notice. Please call us when dimensions are critical. 44 Phone:

45 RSS FITTINGS GRDEN HOSE RSS NOZZLE Part # Size pprox /4" RSS 3" CROSSED PTTERN RSS NOZZLE Part # Size pprox /4" " CROSSED PTTERN RSS NOZZLE Part # Size pprox /4" Lead Free Lead Free Part # Size Zinc lloy spray nozzle with insulated handle /2" soft grip and front thread protector Part # Size Zinc lloy spray nozzle /4" 6.15 Lead Free Part # Size Zinc lloy spray nozzle with easily adjustable brass /4" head and plastic grip Part # Size Plastic spray nozzle /2" 3.01 Fax: sales@global-hose.com 45

46 RSS SE 45 FLRE SE 45 0 Flare RSS FITTINGS Thread Size - - Tube O.D. 1/8 3/16 1/ 4 5/16 3/ 8 7/16 1/ 2 5/ 8 3/ 4 Thread Size- 5/ /8-24 7/ /2-20 5/ / /4-16 7/ /16-14 Typical pplication LP and natural gas, flammable liquids, Used With instrumentation, refrigeration, power Copper, brass, aluminum and steel hydraulic tubing that steering, hydraulic and pneumatic systems. can be flared. Working Pressure Ranges Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73 0 F with copper tubing: P SI T ube O.D. (in. ) Tube Wall (in. ) / / / / / / / / / Vibration Good resistance - use long nut when greater vibration resistance is required. Temperature Range F to F (-53 0 C to C) range at maximum operating pressures. Material C360 rass for arstock fittings. C377 rass for forged fittings. ctual O.D. of Flare Fittings Tolerance +/-.03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Conformance Meets specifications and standards of S, SME, SE and MS (Military standards). ssembly Instructions 1- Cut tubing to desired length. Make sure all burrs are removed and ends are cut square. 2- Slide nut on tube. Threaded end of nut must face out. 3- Flare end of tube with a 45 0 flaring tool. a-measure flare diameter. b- Examine flare for excessive thin out. 4- Lubricate threads and assemble to fitting body. Nut should be turned hand tight. 5- Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn. Note: Do not over-torque as it may damage the fitting or split the tubing at the flare. 46 Phone:

47 RSS FITTINGS SE 45 FLRE SHORT ROD NUT SE# FS 1110 N1 41FX 441S 'L' Part # Thread Size Thread pprox. UNF /8 5/ /16 3/ /4 7/ L 1/4" 7/ /16 1/ L 3/8 5/ /8 5/ /16 11/ L 1/2 3/ /2 3/ L 5/8 7/ /8 7/ /4 1-1/ /8 1-1/ / RSS REDUCING SHORT ROD NUT Part # Thread Size pprox. UNF /8 x 1/ /2 x 3/ /8 x 1/ LONG ROD NUT SE# FL N Lead Free fittings available on pgs Part # Thread Size pprox. UNF / / / / / / / / "L" means light pattern. -These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. Fax: sales@global-hose.com 47

48 SE 45 FLRE RSS FITTINGS LONG FORGED NUT SE# RSS 41FF 39 N4 14FL 641 Part # Thread Size pprox. UNF / / / / / SHORT FORGED NUT SE# FS 41FFS S 1116 NS4 Part # Thread Size pprox. UNF / / / / / / / / EXTR HEVY SHORT FORGED NUT NS Part # Thread Size pprox. UNF / / / / FORGED REDUCING NUT NSR4 14FS 41FRS 40R 662-S Part # Thread Size pprox. UNF /16 x 1/ /8 x 1/ /8 x 5/ /2 x 3/ /8 x 3/ /8 x 1/ /4 x 5/ Phone:

49 RSS FITTINGS SE 45 FLRE FLRED PLUG F PF 57 P Part # Thread Size pprox. UNF / / / / / / RSS FLRED CP 640F 41FC 56 FINGER TIGHTENING CP NFT5 N Part # Thread Size pprox. UNF / / / / / / / O-Ring Included Part # Thread Size pprox. UNF /4" COPPER GSKET SE# GF 6251 FG Part # Size pprox / / / / / / / Fax: sales@global-hose.com 49

50 SE 45 FLRE RSS FITTINGS COPPER ONNET SE# RSS 1 3GF 64C F Part # Size pprox / / / / / / MLE LL CHECK CONNECTOR Part # Male UNF x pprox. Male NPTF /4 x 1/ /8 x 1/ Note: all & Spring position may be reversed to change flow/check position. Min working pressure 3 PSI. UNION SE# F U2 Part # Thread Size pprox. UNF / / L 1/ / / L 3/ / L 1/ / L 5/ / / / "L" means light pattern. -These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. 50 Phone:

51 RSS FITTINGS REDUCING UNION SE 45 FLRE 656F UR2 42-R Part # Thread Size pprox. UNF /16 x 1/ /8 x 1/ /8 x 5/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ RSS UNION TEE SE# F T2 144F ody Size Forged Tee arstock Tee Part # Thread Size ody pprox. UNF Size / / / * 1/ / / / / / / * arstock REDUCING TEE 1 x 2 x 3 144F TR2 659F 684F 44R 1 2 ody Size 3 C Part # Thread Size UNF 1x2x3 C ody Size pprox /4 x 1/4 x 3/ /16 x 5/16 x 1/ /8 x 1/4 x 1/ /8 x 1/4 x 3/ /8 x 3/8 x 1/ /8 x 3/8 x 1/ /8 x 3/8 x 5/ /2 x 3/8 x 3/ /2 x 3/8 x 1/ /2 x 1/2 x 1/ /2 x 1/2 x 3/ /2 x 1/2 x 5/ /8 x 1/2 x 5/ /8 x 5/8 x 3/ /8 x 5/8 x 1/ /4 x 3/4 x 5/ Fax: sales@global-hose.com 51

52 RSS SE 45 FLRE MLE RNCH TEE 1 2 T1 145F 45 ody Size 3 Forged Tee 1 2 ody Size 3 arstock Tee SE# RSS FITTINGS Part # Male Flare x Male NPT (1&2)x3 ody Size pprox /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ * arstock Deliberate often - decide once. - Latin Proverb I perfer the errors of enthusiasm to the indifference of wisdom. - natole France Do what you can with what you have, where you are. - Theodore Roosevelt Nothing in the world can take the place of persistence. Talent will not; nothing is more common than unsuccessful men of talent. Genius will not; unrewarded genius is almost a proverb. Education will not; the world is full of educated derelicts. Persistence and determination alone are omnipotent. - Calvin Coolidge 52 Dimension data can change without notice. Please call us when dimensions are critical. Phone:

53 RSS FITTINGS SE 45 FLRE FEMLE DPTER SE# U3 Part # Male Flare x pprox. Female NPTF /8 x 1/ /16 x 1/ L 1/4 x 1/ /4 x 1/ L 1/4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ L 3/8 x 1/ /8 x 1/ L 3/8 x 3/ /8 x 3/ L 3/8 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ L 1/2 x 3/ /2 x 3/ L 1/2 x 1/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ /8 x 3/ RSS Dimension data can change without notice. Please call us when dimensions are critical. "L" means light pattern. -These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. If you don't want anyone to know it, don't do it. - Chinese Proverb If a man has no vices, he's in great danger of making vices about his virtures, and there's a spectacle. - Thornton Wilder Fax: sales@global-hose.com 53

54 RSS SE 45 FLRE MLE DPTER U1 48 SE# RSS FITTINGS Part # Male Flare x pprox. Male NPTF /8 x 1/ /16 x 1/ L 1/4 x 1/ /4 x 1/ L 1/4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ L 5/16 x 1/ /16 x 1/ L 5/16 x 1/ /16 x 1/ /16 x 3/ /8 x 1/ L 3/8 x 1/ /8 x 1/ L 3/8 x 3/ /8 x 3/ L 3/8 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ L 1/2 x 3/ /2 x 3/ L 1/2 x 1/ /2 x 1/ /2 x 3/ /8 x 1/ L 5/8 x 3/ /8 x 3/ L 5/8 x 1/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 3/ x 3/ x FLRE x MIP with check NEW Part # Size WC 1/4" x 1/4" 2.25 "L" means light pattern. -These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. 54 Phone:

55 RSS FITTINGS SE 45 FLRE 90 MLE ELOW SE# F 49 E1 149F Forged Elbow arstock Elbow ody Size ody Size Part # Male Flare x ody pprox. Male NPTF Size /8 x 1/ * 1/8 x 1/ /16 x 1/ * 3/16 x 1/ /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 3/ /4 x 1/ /16 x 1/ * 5/16 x 1/ /16 x 1/ * 5/16 x 1/ /16 x 3/ /8 x 1/ * 3/8 x 1/ /8 x 1/ * 3/8 x 1/ /8 x 3/ * 3/8 x 3/ /8 x 1/ /8 x 3/ /2 x 1/ * 1/2 x 1/ /2 x 3/ * 1/2 x 3/ /2 x 1/ * 1/2 x 1/ /2 x 3/ /8 x 1/ /8 x 3/ * 5/8 x 3/ /8 x 1/ * 5/8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ * 3/4 x 3/ /8 x 3/ x 3/ x RSS * arstock Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 55

56 SE 45 FLRE RSS FITTINGS 90 FEMLE ELOW SE# RSS E F ody Size Forged Elbow arstock Elbow Part # Male Flare x ody pprox. Female NPTF Size /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ * 3/8 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ * 1/2 x 3/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ * arstock FORGED MLE RUN TEE 1 T3 151F 51 ody Size 3 C 2 Part # Male Flare x Male NPTF (1&3) x 2 C ody Size pprox /16 x 5/16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 3/ /8 x 1/2 x 3/ /8 x 1/ /2 x 3/8 x 1/ /2 x 3/ /2 x 1/ /8 x 1/ /4 x 1/ /4 x 3/ Dimension data can change without notice. Please call us when dimensions are critical. 56 Phone:

57 RSS FITTINGS SE 45 FLRE FORGED FLRE CROSS SE# C1 147F 52 Part # Thread Size ody pprox. UNF Size / / / / RSS FORGED DPTER TEE / SERVICE TEE T ody Size 3 C Part # Size 1 x 2 x 3 C ody Size pprox /8 x 1/8 x 1/ /4 x 1/4 x 1/ FORGED 90 FLRE ELOW E2 155F Part # Thread Size pprox. UNF / / / / / / / / / FORGED REDUCING ELOW ody Size Part # Male Flare x ody pprox. Male Flare Size /8 x 1/ /8 x 5/ /2 x 3/ /8 x 1/ ER2 657F 55R Fax: sales@global-hose.com 57

58 SE 45 FLRE RSS FITTINGS FORGED FEMLE RNCH TEE RSS TF1 136 T FP 45 ELOW 3 ody Size Part # Male Flare x Female NPTF (1&2) x 3 ody Size pprox /4 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /8 x 1/ SE# E F Forged arstock 654F 47 59FF ody Size ody Size Part # Male Flare x ody pprox. Male NPTF Size /4 x 1/ * 1/4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ * 3/8 x 1/ /8 x 3/ /8 x 1/ /2 x 3/ * 1/2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ /4 x 1/ /4 x 3/ * arstock RSS GS RNGE FITTINGS RSS MLE DPTERS Part # Male Flare x Male NPTF pprox /2 x 1/2 (3/8 FIP TP) /16 x 1/ DRUM DPTERS Straight Thread RD IF K1 SE# Part # Male Flare x pprox. FIP /4 x 1/ /4 x 3/ Phone:

59 UNION 2310 U4 660HD 32 RSS FITTINGS FEMLE 45 FLRE FITTINGS Use with Copper Gasket SE# SE 45 FLRE Part # Female Flare x pprox. Female Flare / / / RSS FEMLE FLRE DPTER SE# U5 664FHD FF Part # Female Flare x pprox. Male NPTF /4 x 1/ /4 x 1/ /8 x 1/ /2 x 3/ /2 x 1/ FLRE REDUCER SE# UR3 661FHD FF Part # Male Flare x pprox. Female Flare /4 x 3/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 5/ /2 x 3/ /2 x 5/ /8 x 1/ /8 x 3/ /4 x 5/ ELOW Use with Copper Gasket E4 669F ody Size Part # Male Flare x Female Flare ody Size pprox /4 x 1/ /2 x 1/ Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 59

60 SE 45 FLRE RSS FITTINGS RSS FLRE SWIVEL FITTINGS RSS FORGED SWIVEL 1350 US4 14FSV 34 SE# Part # Female pprox. Flare UNF / / / / / / REDUCING SWIVELS 1 2 Part # Female Flare UNF 1 2 pprox /8 x 1/ /2 x 3/ /8 x 1/ FORGED SWIVEL ELOWS ES4 Part # Male Flare x pprox. Female Flare / * 3/ * Steel RSS SOLDER FITTINGS FLRE TO SWT UNION 4085 US3 672FS 46FS 277 SE# Part # Male Flare x pprox. SWT /4 x 3/ /2 x 5/ /4 x 3/ Lead Free fittings available on pgs Phone:

61 RSS FITTINGS JIC 37 FLRE Thread Chart Size JIC Thread 1/8 5/ /16 3/8-24 1/4 7/ /16 1/2-20 3/8 9/ /2 3/4-16 5/8 7/8-14 3/4 1-1/ /16-12 STRIGHT ULKHED TUE UNION Part # JIC Thread / / STRIGHT STRIGHT SWIVEL DPTER Part # JIC Thread Pipe Size / / / / /4-16 1/ FEMLE STRIGHT DPTER RSS Part # JIC Thread Pipe Size / / / / / / /2-20 1/ /2-20 1/ / / / / / / / / /4-16 1/ /4-16 3/ /4-16 1/ /4-16 3/ /8-14 3/ /8-14 1/ /8-14 3/ / / / FORGED 0 ELOW 90 90FORGED 0 ELOW Part # JIC Thread Pipe Size F 7/ / F 7/ / F 1/2-20 1/ F 9/ / F 9/ / F 9/ / F 9/ / F 3/4-16 3/ F 3/4-16 1/ F 3/4-16 3/ F 7/8-14 1/ F 1-1/ / F 1-1/ / F 1-5/ / F 1-5/ Part # JIC Pipe Thread Size / / / / / / / / /4-16 3/ /4-16 1/ /8-14 1/ / / STRIGHT TUE UNION Part # JIC Thread / / / / / TUE TEE Part # JIC Thread Pipe Size F 7/ / F 7/ / F 1/2-20 1/ F 9/ / F 9/ / F 9/ / F 9/ / F 3/4-16 3/ F 3/4-16 1/ F 7/8-14 1/ F 1-1/ / For Steel 37 Flare JIC fittings see page 319 Part # JIC Thread / / FEMLE ELOW (FORGED ODY) Part # JIC Thread Pipe Size / / / / / / Fax: sales@global-hose.com 61

62 RSS INVERTED FLRE Inverted Flare RSS FITTINGS Thread Size - Tube O.D. Thread Size- 1/8 3/16 1/ 4 5/16 3/ 8 7/16 1/ 2 5/ 8 3/ 4 7/ 8 1 5/ /8-24 7/ /2-20 5/ / /4-18 7/ / / /16-16 Typical pplication Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. Working Pressure Ranges Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73 0 F with copper tubing: P SI T ube O.D. (in.) Tube Wall (in.) / / / / / / / / Vibration Excellent resistance. Temperature Range F to F (-53 0 C to C) range at maximum operating pressures. Material C360 rass. Used With Copper, brass, aluminum and steel hydraulic tubing that can be flared. dvantages Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends. Steel or brass tube nut. Tolerance +/-.03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical Conformance Meets specifications and standards of S, SME, SE and MS (Military Standards). ssembly Instructions 1-Cut tubing to desired length. Make sure all burrs are removed and the ends are cut square. 2- Slide nut on tube. Threaded end of nut must face out. 3- Flare end of tube with a 45 0 flaring tool. a- Measure flare diameter. b- Examine flare for excessive thin out. c- On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares. 4- Lubricate threads and assemble to fitting body. Nut should be turned hand tight. 5- Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn. Note: Do not over-torque as it may damage the fitting or split the tubing at the flare. ctual O.D. of male inverted flare threads 62 Phone:

63 RSS FITTINGS INVERTED FLRE ZINC CHROMTE STEEL NUT SE# FS W Part # Size Thread pprox /8 5/ /16 3/ /4 7/ /16 1/ /8 5/ /16 11/ /8" 11/ /2 3/ /8 7/ /4 1-1/ RSS LONG STEEL NUT 7896 Part # Size pprox / / INVERTED FLRE RSS NUT SE# IF I SPECIL FORD NUT Part # Size pprox / / / / / / IF Part # Size pprox / Fax: sales@global-hose.com 63

64 INVERTED FLRE RSS FITTINGS UNION INTERNL SE# RSS IFHD Part # Inv. Flare X pprox. Inv. Flare / / / / / / FEMLE DPTER SE# IFHD W Part # Inv. Flare X pprox. Female NPTF /16 x 1/ /4 x 1/ /16 x 1/ /8 x 1/ /2 x 3/ MLE DPTER SE# IFHD W Part # Inv. Flare X pprox. Male NPTF /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /2 x 1/ /8 x 1/ /4 x 3/ Dimension data can change without notice. Please call us when dimensions are critical. World War II was the last government program that really worked. - George F. Will 64 Phone:

65 RSS FITTINGS INVERTED FLRE ELOW SE# IFHD IF 49W Part # Inv. Flare X pprox. Male NPTF /8 x 1/ /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ /4 x 1/ /8 x 3/ x * Restricted pipe end.062 RSS 45 ELOW SE# IFHD W UNION TEE Part # Inv. Flare X pprox. Male NPTF /16 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /2 x 3/ /8 x 1/ SE# IFHD I Part # Size pprox / / / / / / Fax: sales@global-hose.com 65

66 INVERTED FLRE RSS FITTINGS STEEL PLUG cored SE# RSS IP Part # Size pprox / / / / MLE RNCH TEE SE# IFHD Part # Inv. Flare x pprox. Male NPTF (1&2)x /16 x 1/ /4 x 1/ /16 x 1/ /8 x 1/ FEMLE ELOW SE# Part # Inv. Flare x pprox. Female NPTF /4 x 1/ /16 x 1/ /8 x 1/ MLE RUN TEE SE# IFHD C Part # Inv. Flare x Male NPTF (1&3)x2 C pprox /16 x 1/ /4 x 1/ /16 x 1/ /8 x 1/ Phone:

67 RSS FITTINGS INVERTED FLRE FEMLE RNCH TEE SE# IFHD Part # Inv. Flare x Female NPTF (1&2)x3 pprox /16 x 1/ /16 x 1/ /8 x 1/ RSS TOWED TRILER RKE TEE C C Part # C Reference # pprox. 3/16 3/16 3/ (9/16-20) (3/8-24) (9/16-20) /16 (1/2-20) /16 (7/16-24) / / (9/16-18) / / /16 (3/8-24) /16 (3/8-24) / /16 (3/8-24) / / /16 (1/2-20) /4 (7/16-24) / /4 (9/16-18) / / INVERTED FLRE UTO FITTINGS DUL MSTER CYLINDER DPTER Part # Male Flare x Reference # pprox. Female Inv /16 x 3/ /16 x 3/ Travel is fatal to prejudice, bigotry and narrow-mindedness. - Mark Twain Fax: sales@global-hose.com 67

68 INVERTED FLRE RSS FITTINGS DUL MSTER CYLINDER DPTER RSS 47W Part # Male Inv. x Female Inv. Reference # pprox /16 x 1/ /4 x 3/ * 7/16-20 x 1/ /16 x 3/ * 5/16 x 1/ /16 x 1/ * 5/16 x 5/ /8 MPT x 5/ * Seals on hex face CRURETOR TO FUEL LINE DPTER - FORD Part # Size pprox /4 (1/2-20) x 1/8 MPT RESTRICTION PIPE DPTER (.0625 ORIFICE ) Part # Size pprox / SE FLRE X INVERTED FLRE Part # SE Flare x pprox. Inv. Flare /4 x 3/ /4 x 1/ /8 x 5/ /8 x 3/ /8 x 7/ Dimension data can change without notice. Please call us when dimensions are critical. 68 Phone:

69 RSS FITTINGS METRIC HYDRULIC RKE FITTINGS INVERTED FLRE METRIC DPTER Part # Male O.D. pprox M10x1.0 3/16 (3/8-24) M11x1.5 3/16 (M10x1.0) M12x1.0 3/16 (M10x1.0) M16x1.5 3/16 (M10x1.0) RSS METRIC TOWED TRILER RKE TEE C C Part # C pprox. 3/16 3/16 3/ (M12x1.0) (3/8-24) (M12x1.0) * ubble flare type DPTER STNDRD TO METRIC ULE Part # Female Male Reference # pprox / (3/16 ) (3/8-24) (10x1.25) /16 13x (3/8-24) /16 (3/8-24) 12x METRIC UNION Part # Size Reference # pprox /16 (10.0MM) Fax: sales@global-hose.com 69

70 RSS POL ( OTTLE GS ) POL RSS FITTINGS (OTTLE GS) Used for making connections in LP gas systems 1001UL /8" POL Thread LH Note: ll bottle fittings are UL listed. TEE CHECK Part # Pipe Size M TILPIECE WITH FLTS POL-T POL-LPT POL-LTPH M Part # Length w/ wrench Flats w/ 6.15 STNDRD NUT 1001UL POL-N M POL 2005 POL 2006 POL 2007 RSS FITTINGS POL CP Part # Pipe Size LH POL PLUG Part # Pipe Size LH DPTERS Part # Pipe Size /8 Flare x lh /2 Flare x lh /8 Flare x lh POL X 1/4 FPT POL-N M POL-P M POL-U POL-U3 Part # Pipe Size LH 3.80 TILPIECE & NUT SSEMLY Part # Pipe Size LH POL x 1/4 FPT TILPIECE & NUT SSEMLY 2002 Part # Pipe Size / Part # Size POL x 1/4 arb Phone:

71 RSS FITTINGS Compression Fittings COMPRESSION RSS Thread Size - Tub ube O.D.D.. Threa hread Size- ize- 1/8 3/16 1/ 4 5/16 3/ 8 7/16 1/ 2 5/ 8 3/ 4 7/8 1 5/ /8-24 7/ /2-24 9/ / / / / /8-188 Typical pplication Instrumentation, hydraulic and pneumatic systems. Pressure Working pressure up to 2000 PSI with a 4:1 safety factor depending on tube size. When using plastic tubing, use the working pressure for type used. Vibration Fair resistance - use long nut when greater vibration resistance is needed. Temperature Range -65 o F to +250 o F (-53 o C to +121 o C) range at maximum operating pressures. (Refer to tubing temperature range.) Conformance Meets specifications and standards of S, SME and SE. ssembly Instructions 1- Cut tubing to desired length. 2- Slide nut and then sleeve on tube. Threaded end of nut must face toward fitting. 3- Insert tubing into fitting body. e sure tubing is bottomed on fitting shoulder. 4- Lubricate threads and assemble nut to fitting body. 5- Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart below. Material C360 rass for barstock fittings. C377 rass for forged fittings. Used With luminum, copper, brass and plastic tubing. Plastic tubing requires insert. Not recommended for steel tubing. Tolerance +/-.02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Tube Size 1/8" thru 1/4" 5/16" 3/8" thru 1" dditional Turns from Hand Tight 1-1/4" 1-3/4" 2-1/4" L at the end of a Part# means Light Pattern -These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. ctual Profile of Compression Threads Fax: sales@global-hose.com 71

72 COMPRESSION RSS FITTINGS RSS RSS SLEEVE FERRULES SE# Part # Size pprox / / / / / / / / / / DELRIN SLEEVE 60-P Part # Size pprox / / / / / / SELF-LIGN SLEEVE 601 Part # Size pprox / / / Part # Size pprox / / * Note: To buy compression fittings with self-align sleeve, simply delete the 18- prefix on the same size compression fitting and substitute 27- prefix. Pricing available upon request. 72 Hour lead time. 72 Phone:

73 RSS FITTINGS COMPRESSION RSS INSERT 63-I 60E PT SLEEVE Part # Size pprox / / / / / / / / / / / / RSS RSS NUT SE# Part # Size Thread pprox /8 5/ /16 3/ L 1/4 7/ /4 7/ /16 1/ L 3/8 9/ /8 9/ /16 5/ L 1/2 11/ /2 11/ L 5/8 13/ /8 13/ / /8 1-1/ NICKEL PLTED NUT Part # Size pprox / / / / Fax: sales@global-hose.com 73

74 RSS COMPRESSION LONG NUT COMPRESSION 161 CPTIVE SLEEVE NUT REK-WY NUT L 81L CP More sizes available Part # Size pprox / / / / * Note: To buy compression fittings with long nut, simply delete the 18- prefix on the same size compression fitting and substitute a 24- prefix. Pricing available upon request. 72 hour lead time. Part # Size pprox / / / / / / / * Note: To buy compression fittings with captive sleeve, simply delete the 18- prefix on the same size compression fitting and substitute a 26- prefix. Pricing available upon request. 72 hour lead time. Part # Size pprox / / * Threaded sleeve fittings on page 84. RSS FITTINGS 61-CC N5CT Part # Size pprox / / / / COMPRESSION PLUG CSP Part # Size pprox / / Phone:

75 RSS FITTINGS COMPRESSION UNION SE# M-62 Part # Size pprox / / L 1/ / / L 3/ / / L 1/ / L 5/ / / L 7/ / RSS REDUCING UNION 62-R Part # Size pprox /4 x 1/ /4 x 3/ /16 x 1/ /8 x 1/ /8 x 5/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 5/ ULKHED UNIONS SE# Part # Size 1 2 pprox / / H Every perfect traveller always creates the country where he travels - Nikos Kazantzakis Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 75

76 COMPRESSION RSS FITTINGS RSS ULKHED NUTS Part # Size pprox / / / LL CHECK VLVE - Min. Working pressure 3 psi TEE C ody Size ody Size 3 Forged 3 arstock 2 Part # Tube OD x pprox. Male NPTF /8 x 1/ /4 x 1/ /8 x 1/ SE# Part # Size ody pprox. Size / * 1/ / * 3/ / * 1/ / * 5/ / * 3/ / * 1/ / / / * arstock FORGED REDUCING TEE 1 64-R 3 ody Size 2 Part # Size ody pprox. 1 x 2 x 3 Size /4 x 1/4 x 1/ /4 x 1/4 x 3/ /8 x 1/4 x 1/ /8 x 3/8 x 1/ /2 x 1/2 x 1/ /2 x 1/2 x 3/ /8 x 5/8 x 3/ /8 x 5/8 x 1/ Phone:

77 UNION ELOW 65 SE2 165C 265C RSS FITTINGS Forged ody Size REDUCING ELOW - Forged arstock SE# COMPRESSION Part # Size ody pprox. Size * 1/ / * 3/ / * 1/ / * 5/ / / * 1/ / / / * arstock RSS ody Size Part # Size ody pprox. Size /8 x 1/ /2 x 3/ /8 x 3/ R TNK DPTER DRILLED THRU (NO STOP) 68-T 682C 80F Part # Comp. X pprox. Male NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 3/ /2 x 1/ /8 x 1/ COMP X SWET DPTER Part # Comp. X pprox. Sweat dapter /8 x 1/2 nom.swt S Lead Free fittings available on pgs Fax: sales@global-hose.com 77

78 RSS COMPRESSION FEMLE DPTER 66 SE# RSS FITTINGS Part # Comp. X pprox. Female NPTF /8 x 1/ /16 x 1/ /16 x 1/ L 1/4 x 1/ /4 x 1/ L 1/4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ L 3/8 x 1/ /8 x 1/ L 3/8 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /2 x 1/ L 1/2 x 3/ /2 x 3/ L 1/2 x 1/ /2 x 1/ /2 x 3/ /8 x 3/ L 5/8 x 1/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 3/ We find it hard to believe that other people's thoughts are as silly as our own, but they probably are. - James Harvey Robinson Dimension data can change without notice. Please call us when dimensions are critical. 78 Phone:

79 RSS FITTINGS COMPRESSION MLE DPTER SE# Part # Comp. X pprox. Male NPTF /8 x 1/ /8 x 1/ /16 x 1/ /16 x 1/ L 1/4 x 1/ /4 x 1/ L 1/4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ /16 x 1/ L 5/16 x 1/ /16 x 1/ /16 x 3/ /16 x 1/ L 3/8 x 1/ /8 x 1/ L 3/8 x 1/ /8 x 1/ L 3/8 x 3/ /8 x 3/ L 3/8 x 1/ /8 x 1/ /8 x 3/ /16 x 1/ /16 x 3/ L 1/2 x 1/ /2 x 1/ L 1/2 x 3/ /2 x 3/ L 1/2 x 1/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 3/ /8 x RSS Never invest your money in anything that eats or needs repairing. - illy Rose Fax: sales@global-hose.com 79

80 COMPRESSION RSS FITTINGS MLE ELOW SE# RSS ody Size ody Size C SE1 169C Forged arstock Part # Comp. X ody pprox. Male NPTF Size /8 x 1/ * 1/8 x 1/ /16 x 1/ * 3/16 x 1/ /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 3/ /4 x 1/ /16 x 1/ * 5/16 x 1/ /16 x 1/ * 5/16 x 1/ /16 x 3/ /16 x 1/ /8 x 1/ * 3/8 x 1/ /8 x 1/ * 3/8 x 1/ /8 x 3/ * 3/8 x 3/ /8 x 1/ * 3/8 x 1/ /8 x 3/ /16 x 1/ /2 x 1/ /2 x 3/ * 1/2 x 3/ /2 x 1/ * 1/2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ * 5/8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ /8 x 3/ * arstock Dimension data can change without notice. Please call us when dimensions are critical. 80 Phone:

81 RSS FITTINGS COMPRESSION FORGED MLE RUN TEE C ST3 3 2 ody Size Part # Comp. X Male NPTF (1&3) X 2 ody Size pprox /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ /8 x 1/ /4 x 1/ RSS MLE RNCH TEE SE# ST1 172C 1 2 ody Size 3 Forged 1 2 ody Size 3 arstock Part # Comp. X Male NPTF (1&2) X 3 ody Size pprox /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ * 3/8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ * 1/2 x 3/ /2 x 3/ /2 x 1/ /8 x 1/ /4 x 1/ /4 x 3/ * arstock Fax: sales@global-hose.com 81

82 COMPRESSION RSS FITTINGS FEMLE ELOW SE# RSS C SE3 170C ody Size Forged arstock ody Size Part # Comp. X ody pprox. Female NPTF Size /8 x 1/ /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ * arstock FORGED DROP-ER ELOW ody Size Part # Comp. X ody pprox. Female NPTF Size /8 x 1/ SE3-DE FORGED TEE 1 2 C Part # Comp. X Female NPTF x Male NPTF 1x(2&3) C pprox /4 x 1/ C ST3 82 Phone:

83 RSS FITTINGS COMPRESSION DPTER TEE 1 C 3 2 ody Size Part # Male NPTF x Female NPTF x Comp. 3x (1&2) C ody Size pprox /8 x 1/ /8 x 1/ RSS C FEMLE RNCH FORGED TEE 1 78 ST C ody Size Part # Comp. X Female NPTF (1&2)x3 ody Size pprox /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /8 x 1/ ELOW SE# SE C ody Size Part # Comp. X ody pprox. Male NPTF Size /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ /8 x 1/ Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 83

84 COMPRESSION GRDEN HOSE SWIVEL RSS FITTINGS WSHER INCLUDED RSS Part # Compression x 1 2 pprox. FGH /4 x 3/ /8 x 3/ NUT MLE DPTER 2 DOULE COMPRESSION THREDED SLEEVE FITTINGS Use with aluminum and copper tubing or plastic tubing with internal tube support. Not recommended for steel tubing. Easy to assemble, no flaring, two piece construction. For use on oil, air, water and grease lubrication systems. When design makes a dimension critical, contact us for information. Tube OD 1/8 3/16 1/4 5/16 3/8 Thread 5/ /8-24 7/ /2-20 9/16-20 Working Pressure * For break away nut, see page 74. Part # Size pprox / / / / / Part # THRD Sleeve x pprox. Male NPTF /8 x * /8 x 1/ /16 x 1/ /4 x 1/ /16 x 1/ /8 x 1/ * 1/4-28 Male Thread Tapered. 90 ELOW ody Size arstock Part # THRD Sleeve x ody pprox. Male NPTF Size /8 x * /8 x 1/ /16 x 1/ /4 x 1/ * 1/4-28 Male Thread Tapered Phone:

85 RSS FITTINGS Flareless Flareless rass Tube Fittings are Interchangeable with Poly-Flo, Poly-Tite and Poly-Line and Poly-Fit flareless RSS Thread Size - Tube O.D. 1/8 3/16 1/4 5/16 3/8 1/2 Thread Size- 5/ /8-24 3/8-24 7/ / /16-20 Typical pplication Pneumatic instrumentation circuits, lubricant and cooling lines. Working Pressure and Temperature Ranges Up to 150 PSI from 0 o F to o F with thermoplastic tubing. Up to 300 PSI from 0 o F to o F with soft metal tubing. Maximum allowable metal tube wall thickness for use with Poly-Tite fittings: 1/8, 3/16 O.D. --no limitation, 1/4 O.D /16, 3/8,1/2 O.D Vibration Excellent Resistance. Temperature Range Depends on tubing used. -65 o F to +250 o F (-53 o C to +121 o C) with brass sleeve, -40 o F to +150 o F (-40 o C to +66 o C) with plastic sleeve. (Refer to tubing temperature range.) Material C360 rass body, plastic or brass sleeve. Used With luminum & copper tubing. Hard plastic tubing requires brass sleeve. Not recommended for steel tubing. Tolerance +/-.02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. dvantages No flaring of tubing required. Easy installation, captive sleeve, pre-assembled for installation and can be reassembled. Nuts rotate around the sleeve during tightening, preventing twisting of tubing. ssembly Instructions 1- Cut tubing to desired length. 2- Slide nut/sleeve assembly on tube. Threaded end of nut must face toward fitting. 3- ottom tubing into fitting. 4- Plastic sleeve - Tighten nut hand tight. rass Sleeve - Tighten nut hand tight, then an additional 3/4 turn. The dead bird does not leave the nest. - The aging Winston Churchill when told in the House of Commons that his fly was open. Fax: sales@global-hose.com 85

86 FLRELESS RSS FITTINGS PLSTIC CP RSS P 259P Part # Tube O.D. pprox / / / PLSTIC SLEEVE 260FF P 260P Part # Tube O.D. pprox / / / / RSS SLEEVE 260F Part # Tube O.D. pprox / / / / NUT ND PLSTIC SLEEVE SSEMLY 261PF PN 261U Part # Tube O.D. Thread pprox. ( Dia. ) /4 3/ /16 7/ /8 1/ /2 11/ journey of a thousand miles begins with a single step. - Lao Tzu Lead Free fittings available on pgs Phone:

87 RSS FITTINGS FLRELESS NUT 61PN FPN Part # Tube O.D. Thread pprox. (Dia.) /8 5/ /16 3/ /4 3/ /16 7/ /8 1/ /2 11/ RSS UNIVERSL NUT ND RSS SLEEVE SSEMLY 261PF P 261U Part # Tube O.D. Thread pprox /8 5/ /16 3/ /4 3/ /16 7/ /8 1/ /2 11/ UNION TUE #M62C 262S 62PC 262PC 1 2 Part # Tube O.D. 1 2 pprox / / UNION 262PF P 262P Part # Tube O.D. pprox / / / / / /8 x 1/ / Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 87

88 FLRELESS UNION TEE RSS FITTINGS RSS P 264P ody Size Part # Tube O.D. ody pprox. Size / / / / / * 3/8 x 1/ / * Reducing ranch FEMLE CONNECTOR P 266P Part # Tube O.D. x pprox. Female NPTF /8 x 1/ /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /2 x 3/ MLE CONNECTOR P 268P Part # Tube O.D. x pprox. Male NPTF /8 x 1/ /8 x 10-32* /8 x 1/ /16 x 1/ /4 x 1/ /4 x 10-32* /4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /16 x 1/4" /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ * Furnished with gasket. 88 Phone:

89 RSS FITTINGS FLRELESS MLE ELOW ody Size P 269P Part # Tube O.D. x ody pprox. Male NPTF Size /8 x 1/ /16 x 1/ * 1/4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ * arstock RSS FEMLE ELOW ody Size P 270P Part # Tube O.D. x ody pprox. Female NPTF Size /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ /2 x 3/ MLE RUN TEE P 271P ody Size Part # Tube O.D. x ody pprox. Male NPTF Size /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /8 x 1/ /2 x 3/ Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 89

90 FLRELESS MLE RNCH TEE RSS FITTINGS RSS P 272P ody Size Part # Tube O.D. x ody pprox. Male NPTF Size /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /2 x 3/ FEMLE RNCH TEE P 277P ody Size Part # Tube O.D. x ody pprox. Female NPTF Size /4 x 1/ /4 x 1/ ULKHED UNION - FLRELESS X COMPRESSION 1274 Part # Tube O.D. pprox / / ULKHED NUT Part # Tube O.D. Thickness pprox / / Thickness Dimension data can change without notice. Please call us when dimensions are critical. 90 Phone:

91 RSS FITTINGS FLRELESS ULKHED UNION 62PH 329P 282P Part # Tube O.D. pprox / / / RSS QUICK DISCONNECT FITTING Part # Tube O.D. x pprox. Male NPTF /4 x 1/ P TUE X TUE QUICK DISCONNECT COUPLERS 349P Part # Tube O.D. pprox / / TUE TO MLE THRED - Single end Shut-Off, Connector, Quick Coupler. 398P 391P + 393P INSERT ONLY - Thru type insert. No Shut-Off. Part # Tube O.D. pprox. x Male Pipe /4 x 1/ /4 x 1/ /8 x 1/ P Part # Tube O.D. pprox / / Fax: sales@global-hose.com 91

92 RSS FLRELESS TUE TO TUE - Double end Shut-Off Type. 394P 392P + 393PD RSS FITTINGS Part # Tube O.D. pprox / / TUE X MLE PIPE - Double End Shut-Off, Connector, Quick coupler. 398PD 393PD + 391P Part # Tube O.D. pprox. x Male Pipe /4 x 1/ /4 x 1/ /8 x 1/ INSERT ONLY - Double End Shut-Off Part # Tube O.D. pprox / PD CHROME PLTED NUT ND PLSTIC SLEEVE Part # Tube O.D. pprox / / TUE CONNECTION - Single end or Double end Shut-Off Type body only. Part # Tube O.D. pprox / / P MLE PIPE CONNECTION - Internal Shut-Off Part # Tube O.D. pprox. x Male Pipe /4 x 1/ /4 x 1/ /8 x 1/ P 92 Phone:

93 PGES RSS FITTINGS RSS PUSH-IN FITTINGS ENGINEERING ND DESIGN QUICK CONNECT, simply push tubing in, no tools. Saves up to 75% of assembly time of standard compression fittings. QUICK DISCONNECT, hold two fingers on insert and pull tubing out, no tools required. REUSELE, connect and disconnect numerous times. FULL FLOW DESIGN, provides up to 60% more flow area than conventional fittings with internal tube supports. POSITIVE SEL, no leaks. fter tubing is inserted, seal is made. VERSTILE, unan O rings standard. Other materials of O rings available. SECURE TUE RETENTION, pulling on tubing only serves to tighten the connection. SELF CONTINED SSEMLY, no loose parts, brass body and insert. RSS CONSTRUCTION, elbows and tees are forged brass. When tubing (1) is inserted into the fitting, it first passes 1 through the gripping teeth 4 (2). Just beyond the gripping teeth is the o-ring (3) which 2 3 provides the leak proof seal 5 against the OD of the tube. The gripping teeth grab the tube, which expands the insert. Pulling back on the tube only tightens the grip as the insert moves onto the camming surface (4). Pressure through the tube also serves to tighten the grip. The tube bottoms against a positive tube stop (5) in a cavity providing tube support to prevent leakage. CHOICE of convenient swivel of economical stationary elbows and tees. STRIGHT CONNECTORS have interior hex for llen key tightening where space is limited...no need to use a wrench. PRE-PPLIED TEFLON based pipe sealant on all male pipe threads, saving customer additional labor. METRIC SIZES VILLE: Metric tube sizes from 2mm through 12mm in both standard NPT and metric pipe sizes are available on a special order basis. WORKING PRESSURE: The fitting is suitable for use up to the maximum working pressure of the plastic tubing used. WORKING TEMPERTURE: F to F (other ranges available on request). PIPE THRED: NPTF with Teflon based sealant pre-applied. RSS PUSH - IN FITTINGS Tolerance +/-.02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical RSS Double Male Union - NICKEL PLTED Q34 Part # Tube O.D. pprox / / / / / / ( For polyurethane or other soft plastic tubing ) Plastic Plug 284PP Q OF PL Part # Tube O.D. pprox / / / / Fax: sales@global-hose.com 93

94 RSS PUSH - IN FITTINGS RSS FITTINGS Union Connector RSS Q PL KQH OF PP Reducer - NICKEL PLTED - TUE OD x STUD Part # Tube O.D. pprox / / / /8 x 1/ / / Part # Tube O.D. pprox. 1 X /8 x 1/ /32 x 1/ /4 x 3/ PPL 286PP UNION TEE KQT OF 264PP Q PL ody Size Part # Tube O.D. ody pprox. Size / / / / / / / FEMLE CONNECTOR 266PP Q PL OF 1166 NEW Part # Tube O.D. pprox. x Female NPTF /8 x 1/ /8 x 1/ /32" x 1/8" /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ Phone:

95 RSS FITTINGS RSS PUSH - IN FITTINGS FIXED MLE ELOW PRESS-IN CRTRIDGE D 269PP Q69-P PLNS C ody Size MLE CONNECTOR 268PP Q PL KQH OF 1168 NEW E NEW NEW Part # Tube O.D. ody pprox. x Male NPTF Size /8 x 1/ /32 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /2 x 1/ Part # Tube O.D. C D E /8" /32" /4" /8" Part # Tube O.D. pprox. x Male NPTF /8 x * /8" x 1/16" /8 x 1/ /8 x 1/ /32 x * /32 x 1/ /32 x 1/ /16 x * /16 x 1/ /4 x * /4" x 1/16" /4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /16 x 1/ /16 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ * Furnished with gaskets RSS Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 95

96 RSS PUSH - IN FITTINGS RSS FITTINGS RSS SWIVEL MLE ELOW aq69-ps pl kql OFS UNION ELOW Q PL KQL FEMLE ELOW ody Size Q70-P OF ody Size NEW Part # Tube O.D. pprox. x Male NPTF /8 x 1/ * 1/8 x 1/ /32 x 1/ /32 x * /32 x 1/ /4 x 1/ /4 x * /4 x 1/ /4 x 3/ * 5/16 x 1/ * 5/16 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 3/ /2 x 1/ * Nickel Plated * Furnished with gaskets Part # Tube O.D. ody pprox. Size / / / / / / Part # Tube O.D. x ody pprox. Female NPTF Size /8" x 1/8" /32 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ FEMLE SWIVEL ELOW NEW Part # Tube O.D. x Female NPTF S 5/32" x 1/8" S 1/4" x 1/8" S 1/4" x 1/4" S 3/8" x 1/4" Phone:

97 RSS FITTINGS RSS PUSH - IN FITTINGS UNION "Y" 1 2 NEW Part # Tube O.D. pprox. 1 X /32" x 5/32" /4 x 1/ /4 x 1/ RSS MLE "Y" QUICK DISCONNECT Q92-P PLNS CROSS Part # Tube O.D. x pprox. Male NPTF /4 x 1/ When tube is disconnected, flow shuts off automatically. NEW Part # Tube O.D. x pprox. Male NPTF /4 x 1/ /4 x 1/ Size Size ody Size /4" /8" ody Size FIXED MLE RUN TEE Q71-P ody Size Part # Tube O.D. x ody pprox. Male NPTF Size /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ Fax: sales@global-hose.com 97

98 RSS PUSH - IN FITTINGS RSS FITTINGS SWIVEL MLE RUN TEE RSS Q71-PS PL KQY OFS NEW NEW NEW NEW Part # Tube O.D. x pprox. Male NPTF /8" x 1/8" /32" x 1/8" /4 x 1/ /4 x 1/ /8" x 1/4" /8 x 3/ /2 x 1/ /2 x 3/ /2" x 1/2" SWIVEL MLE RNCH TEE KQT OF Q PL Part # Tube O.D. x pprox. Male NPTF /8 x 1/ /32 x * /32 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ * Furnished with gaskets FIXED MLE RNCH TEE ody Size Q72-P Part # Tube O.D. x ody pprox. Male NPTF Size /8 x 1/ /32 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ FEMLE RNCH TEE ody Size Part # Tube O.D. x ody pprox. Female NPTF Size /4 x 1/ /8 x 1/ Q77-P PL 98 Phone:

99 RSS FITTINGS RSS PUSH - IN FITTINGS ULKHED UNION Q82-P PLH KQE OF 1174 NEW NEW Part # Tube O.D. pprox /8" /32" / / / / RSS FEMLE ULKHED UNION Part # Tube O.D. x Female NPTF pprox /4 x 1/ /4 x 1/ /8 x 1/ Q86-P Dimension data can change without notice. Please call us when dimensions are critical. Component Parts and Materials ody rass - Nickel Plated Thrust Ring Plastic Sleeve rass - Nickel Plated Gripper Collet Stainless Steel Safety Ring P66 Lip Seal ( 1/8 O-Ring Seal) NR 70 Thread Seal NR 70 NICKEL PLTED PUSH-IN FITTINGS PGES Max Operating Pressure: psi (17 bar ) Vacuum service. Min Temperature: 0 F ( -18 C ) Max Temperature: 160 F ( +70 C ) Tubing: Nylon, Polyethylene, Polyurethane. - For best results use 95 Durometer Media: Compressed air, water. Tolerance +/-.02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. GLOL THRED Works With Inch or Metric Threads GLOL THRED NPT SPT RC NPTF SPP G Look for this Logo Global Thread fittings can be assembled with female threads produced to the following standards: Tapered NPTF Parrallel (SPP, SP, ISO 7) Tapered (SPT, PT, ISO 7, ISO 228) Lead Free fittings available on pgs Fax: sales@global-hose.com 99

100 NICKEL PLTED PUSH - IN FITTINGS RSS FITTINGS RSS UNION CONNECTOR 62PL NICKEL PLTED PUSH-IN FITTINGS Part # Tube O.D. pprox N 1/ N 5/ N 5/32" x 1/4" N 1/ N 3/ N 3/8" x 1/4" N 1/ N 1/2" x 3/8" REDUCER 67PPL Part # Tube O.D. 2 Tube O.D N 1/4" 1/8" N 1/4" 5/32" N 3/8" 1/4" N 1/2" 1/4" N 1/2" 3/8" UNION TEE 164PL ody Size Part # Tube O.D. ody pprox. Size N 1/ N 5/ N 1/ N 5/ N 3/ N 1/ FEMLE CONNECTOR 66PL FIXED MLE ELOW W169PLNS ody Size Part # Tube O.D. pprox. x Female NPTF N 1/8 x 1/ N 1/8 x 1/ N 1/4 x 1/ N 1/4 x 1/ N 3/8 x 1/ N 3/8 x 3/ Part # Tube O.D. ody pprox. x Male NPTF Size N 1/4 x 1/ N 1/4 x 1/ N 3/8 x 1/ N 3/8 x 3/ Phone:

101 MLE CONNECTOR 68PL RSS FITTINGS GLOL THRED NPT SPT RC NPTF SPP G NICKEL PLTED PUSH - IN FITTINGS Part # Tube O.D. pprox. x Male Global Thread N 1/8 x N 1/8 x 1/ N 1/8 x 1/ N 5/32 x N 5/32 x 1/ N 5/32 x 1/ N 1/4 x N 1/4 x 1/ N 1/4 x 1/ N 1/4 x 3/ N 5/16 x 1/ N 5/16 x 1/ N 5/16 x 3/ N 3/8 x 1/ N 3/8 x 1/ N 3/8 x 3/ N 3/8 x 1/ N 1/2 x 1/ N 1/2 x 3/ N 1/2 x 1/ RSS SWIVEL MLE ELOW W169PL GLOL THRED NPT SPT RC NPTF SPP G Part # Tube O.D. pprox. x Male Global Thread N 1/8 x 1/ N 1/8 x 1/ N 5/32 x 1/ N 5/32 x N 1/4 x 1/ N 1/4 x 1/ N 1/4 x 3/ N 5/16 x 1/ N 5/16 x 3/ N 3/8 x 1/ N 3/8 x 1/ N 3/8 x 3/ N 3/8 x 1/ N 1/2 x 3/ N 1/2 x 1/ FEMLE SWIVEL ELOW Part # Tube O.D. x Female NPTF N 5/32" x 1/8" N 5/32" x 1/4" N 1/4" x 1/8" N 1/4" x 1/4" N 3/8" x 1/8" N 3/8" x 1/4" Fax: sales@global-hose.com 101

102 RSS NICKEL PLTED PUSH - IN FITTINGS UNION ELOW 165PL ody Size RSS FITTINGS Part # Tube ody pprox. O.D. Size N 1/ N 5/ N 1/ N 5/ N 3/ N 1/ UNION "Y" 662PL Part # Tube O.D. pprox N 1/4 x 1/ SWIVEL MLE RUN TEE W171PL GLOL THRED NPT SPT RC NPTF SPP G Part # Tube O.D. x pprox. Male Global Thread N 1/4 x 1/ N 1/4 x 1/ N 1/4" x 3/8" N 3/8 x 3/ N 1/2 x 1/ N 1/2 x 3/ SWIVEL MLE RNCH TEE W172PL GLOL THRED NPT SPT RC NPTF SPP G Part # Tube O.D. x pprox. Male Global Thread N 1/8 x 1/ N 5/32 x N 5/32 x 1/ N 1/4 x 1/ N 1/4 x 1/ N 1/4" x 3/8" N 3/8 x 1/ N 3/8 x 3/ N 1/2 x 3/ N 1/2 x 1/ ULKHED UNION 62PLH Part # Tube O.D. pprox N 1/ N 5/ N 3/ Phone:

103 Pressure Range: PSI ( 17 bar ) Vacuum service Temperatures: Minimum: 0 F ( -18 C ) Maximum: 160 F ( +70 C ) Media: ir, Oil, Water, Gas (Consult factory for seal compatibility) POS Components Materials 1 ody Chrome plated brass 2 all Seats Teflon 3 Stem Seal NR 70 (Viton & other compounds on request) 4 Stem Chrome plated brass 5 Handle Glass filled nylon 6 Color Plate Nylon (Std. lue, optional, green, yellow, red, white) 7 Handle Screw Steel - Plated for corrosion resistance 8 all Retainer Seal RSS FITTINGS Push-In all Valves NR 70 (Viton & other compounds on request) 9 all Retainer Chrome plated brass 10 all Chrome plated brass NICKEL PLTED PUSH-IN FITTINGS Neologisms from Washington Post readers. 1. Coffee (n.), the person upon whom one coughs. 2. Flabbergasted (adj.), appalled over how much weight you have gained. 3. bdicate (v.), to give up all hope of ever having a flat stomach. 4. Esplanade (v.), to attempt an explanation while drunk. 5. Willy-nilly (adj.), impotent. 6. Negligent (adj.), a condition in which you absentmindedly answer the door in your nightgown. 7. Lymph (v.), to walk with a lisp. 8. Gargoyle (n), olive-flavored mouthwash. 9. Flatulence (n.) emergency vehicle that picks you up after you are run over by a steamroller. RSS LL VLVE WITH PUSH-FIT CONNECTIONS Part # Tube /8" /4" /8" alderdash (n.), a rapidly receding hairline. 11. Testicle (n.), a humorous question on an exam Rectitude (n.), the formal, dignified bearing adopted by proctologists. 13. Pokemon (n), a Rastafarian proctologist. LL VLVE MLE NPTF PUSH-FIT CONNECTIONS Part # NPTF Tube /8" 5/32" /4" 1/4" /8" 3/8" Oyster (n.), a person who sprinkles his conversation with Yiddishisms Frisbeetarianism (n.), (back by popular demand): The belief that, when you die, your soul flies up onto the roof and gets stuck there. 16. Circumvent (n.), an opening in the front of boxer shorts worn by Jewish men. Fax: sales@global-hose.com 103

104 NICKEL PLTED METRIC PUSH-IN FITTINGS RSS FITTINGS NICKEL PLTED METRIC PUSH-IN FITTINGS RSS METRIC TUE STRIGHT MLE GLOL THRED NPT SPT RC NPTF SPP G Part # Tube O.D. Global (mm) Thread N 4 1/8" N 4 1/4" N 5 1/8" N 5 1/4" N 6 1/8" N 6 1/4" N 8 1/8" N 8 1/4" N 8 3/8" N 8 1/2" N 10 1/4" N 10 3/8" N 10 1/2" N 12 1/4" N 12 3/8" N 12 1/2" N 14 3/8" N 14 1/2" METRIC TUE SWIVEL MLE ELOW GLOL THRED NPT SPT RC NPTF SPP G Part # Tube O.D. Global (mm) Thread N 4 1/8" N 4 1/4" N 5 1/8" N 6 1/8" N 6 1/4" N 8 1/8" N 8 1/4" N 8 3/8" N 8 1/2" N 10 1/4" N 10 3/8" N 10 1/2" N 12 3/8" N 12 1/2" N 14 3/8" N 14 1/2" Low Lead fittings available on pgs Phone:

105 RSS FITTINGS METRIC TUE SWIVEL MLE RNCH TEE NICKEL PLTED METRIC PUSH-IN FITTINGS GLOL THRED NPT SPT RC NPTF SPP G Part # Tube O.D. Global (mm) Thread N 4 1/8" N 4 1/4" N 5 1/8" N 6 1/8" N 6 1/4" N 8 1/8" N 8 1/4" N 10 1/4" N 10 3/8" N 10 1/2" N 12 3/8" N 12 1/2" N 14 3/8" N 14 1/2" RSS METRIC TUE SWIVEL MLE RUN TEE GLOL THRED NPT SPT RC NPTF SPP G Part # Tube O.D. Global (mm) Thread N 4 1/8" N 4 1/4" N 5 1/8" N 6 1/8" N 6 1/4" N 8 1/8" N 8 1/4" N 10 1/4" N 10 3/8" N 10 1/2" N 12 3/8" N 12 1/2" It's not the world that's got so much worse but the news coverage that's got so much better. - G.K. Chesterton Fax: sales@global-hose.com 105

106 NICKEL PLTED METRIC PUSH-IN FITTINGS ULKHED UNION RSS FITTINGS RSS Part # Tube O.D. Tube O.D. (mm) (mm) N N N N N N N N N N N N ULKHED Part # Tube O.D. M (mm) N 3 M10x N 4 MI2x N 5 M14x N 6 M14x N 8 M16x N 10 M20x N 12 M22x UNION ELOW ody Size Part # Tube O.D. ody (mm) Size N N N N N N N N When he was born, his father came into the room and gave him a funny look. s you can see, he's still got it. -??? 106 Phone:

107 UNION TEE RSS FITTINGS NICKEL PLTED METRIC PUSH-IN FITTINGS ody Size Part # Tube O.D. ody (mm) Size N N N N N N N N RSS UNION Y Part # Tube O.D. (mm) N N N N N N PLUG Part # Tube O.D. (mm) N N N N N N REDUCER 2 Stud Part # Stud Tube O.D N N N N N N N Fax: sales@global-hose.com 107

108 COMPOSITE ODY PUSH - IN FITTINGS RSS FITTINGS Composite ody Push-In Fittings RSS Specifications Fluid admitted ir Working pressure range PSI (10R) Min. urst pressure 340PSI (23R) Working Temperature range -104 F ~180 F Materials of Construction: 1 ody Composite Polyacetal (hemopolymer,copolymer) 2 ody rass 3 Tube Release cetal Resin 4 Retainer rass 5 Gripper Ring Stainless Steel 6 Spacer rass 7 O-Ring NR 70 8 Threads rass w/ white sealant The latest generation of composite material is used in the body construction in addition to brass on threaded components and stainless steel on the tube gripper. Tolerance +/-.02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. 108 Phone:

109 UNION RSS FITTINGS COMPOSITE ODY PUSH-IN FITTINGS PQ62P Part # Tube O.D. pprox C 1/ C 3/ RSS UNION TEE PQ64P FEMLE CONNECTOR rass PQ66P MLE CONNECTOR Nickel Plated PQ68P Part # Tube O.D. pprox C 1/ C 3/ Part # Tube O.D. pprox. x Female NPT C 1/4 x 1/ C 1/4 x 1/ C 3/8 x 1/ C 3/8 x 3/ Part # Tube O.D. pprox. x Male NPT C 1/4 x 1/ C 1/4 x 1/ C 1/4 x 3/ C 3/8 x 1/ C 3/8 x 3/ C 3/8 x 1/ C 1/2 x 1/ C 1/2 x 3/ C 1/2 x 1/ SWIVEL MLE ELOW Swivels for installation only. Not Free Swiveling PQ69PS Part # Tube O.D. pprox. x Male NPT C 1/4 x 1/ C 1/4 x 1/ C 1/4 x 3/ C 3/8 x 1/ C 3/8 x 1/ C 3/8 x 3/ C 3/8 x 1/ Fax: sales@global-hose.com 109

110 RSS COMPOSITE ODY PUSH - IN FITTINGS SWIVEL MLE RNCH TEE Swivels for installation only. Not Free Swiveling PQ72PS ULKHED UNION RSS FITTINGS Part # Tube O.D. pprox. x Male NPT C 1/4 x 1/ C 1/4 x 1/ C 1/4 x 3/ C 3/8 x 1/ C 3/8 x 3/ PQ82P 90 UNION ELOW PQ65P SWIVEL MLE RUN TEE Swivels for installation only. Not Free Swiveling PQ71PS UNION "Y" CONNECTOR PQ89P SWIVEL "Y" CONNECTOR PQ88PS IN-LINE NEEDLE VLVE PQ310C Part # Tube O.D. pprox C 1/ C 3/ Part # Tube O.D. pprox C 1/ C 3/ Part # Tube O.D. pprox. x Male NPT C 1/4 x 1/ C 1/4 x 1/ C 3/8 x 1/ C 3/8 x 1/ C 3/8 x 3/ Part # Tube O.D. pprox C 1/ C 3/ Swivels for installation only. Not Free Swiveling Part # Tube O.D. pprox. x Male NPT C 1/4 x 1/ Part # Tube O.D. pprox C 1/ RIGHT NGLE FLOW CONTROL METER IN Part # Tube O.D. pprox. x Male NPT C 1/4 x 1/ JPQ 110 Phone:

111 RSS FITTINGS Technical Characteristics P RT 1 P RT 2 P RT 3 P RT 4 P RT 5 P RT 6 P RT 7 P RT 8 ODY ODY TUE RELES E RETINE R GRIPPER RING SPCER COMPOSITE NICKEL PLTED RSS CETL RESIN NICKEL PLTED RSS STINLESS STEEL COMPOSITE THRED PCKIN G NR 70 O-RING NR 70 THRED SEL NR70 MLE DPTER METRIC PUSH-INS Operating Range Pressure: 0 to 220 PSI (15 bar) Vacuum: 0 to 29hg (-.99 bar) Temperature -5 0 F to F (-20 0 C to C) Media Compressed air. Non-toxic fluids (water) Materials The latest generation of composite material is used in the body construction in addition to nickel-plated brass on threaded components and stainless steel on the tube gripper. UNION 90 0 ELOW UNION TEE RSS Nickel Plated Part # Tube OD (mm) SPT Thread / / / / / / / / / / UNION Part # Tube O.D. (mm) SWIVEL MLE 90 0 ELOW Part # Tube OD (mm) SPT Thread / / / /8" /4" /8" /8" /2" Fax: Part # Tube O.D. (mm) SWIVEL MLE RNCH TEE Part # Tube OD (mm) SPT Thread / / / /8" /4" /8" /4" /8" /2" /8" /2" Part # Tube O.D. (mm) SWIVEL MLE RUN TEE Part # Tube OD (mm) SPT Thread / / / /8" /4" /8" /4" /8" /8" /2" UNION Y CONNECTOR Part # Tube OD (mm) sales@global-hose.com 111

112 RSS 112 SPT/ SPP FITTINGS MLE SPP NIPPLE Part # Size /8 X 1/ /4 X 1/ /4 X 1/ /8 X1/ /8 X 1/ /8 X 3/ /2 X 1/ /2 X 3/ /2 X 1/ /4 X 1/ /4 X 3/ MLE NIPPLE SPT X MLE NPT Part # Size * 1/8 X 1/ * 1/4 X 1/ * 3/8 X 3/ * 1/2 X 1/ * 3/4 X 3/ MLE SPT NIPPLE Part # Size /8 X 1/ /4 X 1/ /4 X 1/ /8 X 1/ /8 X 1/ /8 X 3/ /2 X 1/ /2 X 1/ /2 X 3/ /2 X 1/ /4 X 1/ /4 X 3/ Phone: SPP COUNTERSUNK SELED PLUG Part # Size / / / / SPT HEX COUNTERSUNK PLUG Part # Size * 1/ * 1/ * 3/ * 1/ * 3/ FEMLE SPP CP Part # Size / / / / RSS FITTINGS SPT MLE X FEMLE NPT Part # Size * 1/8 X 1/ * 1/4 X 1/ * 3/8 X 3/ * 1/2 X 1/ * 3/4 X 3/ NPT MLE X FEMLE SPP Part # Size * 1/8 X 1/ * 1/4 X 1/ * 3/8 X 3/ * 1/2 X 1/ * 3/4 X 3/ USHING SPT MLE X SPP FEMLE Part # Size /4 X 1/ /8 X1/ /8 X 1/ /2 X 1/ /2 X 3/ /4 X 1/ ll Fittings are Nickel Plated except (*) which are Yellow rass RSS RIGID MLE R DPTER Part # Hose I.D. x SPT * 1/4" x 1/8" * 1/4" x 1/4" * 3/8" x 1/4" * 3/8" x 3/8" * 3/8" x 1/2" * 1/2" x 3/8" * 1/2" x 1/2" * 3/4" x 3/4" * 1" x 1"

113 RSS FITTINGS MLE SPP X FEMLE SPP DPTER Part # Size /8 X 1/ /8 X 1/ /4 X 1/ /4 X 1/ /4 X 3/ /8 X 1/ /8 X 1/ /8 X 3/ /8 X 1/ /2 X 1/ /2 X 3/ /2 X 1/ FEMLE SPP COUPLING 90 SPT MLE ELOW SPP FEMLE TEE Part # Size /8 X 1/ /4 X 1/ /8 X 3/ /2 X 1/ MLE SPT X FEMLE SPP 90 ELOW Part # Size /8 X 1/ /4 X 1/ /8 X 3/ /2 X 1/ SPP FEMLE 90 ELOW SPT/SPP FITTINGS Part # Size / / / / SPP FEMLE X SPT MLE RNCH TEE Part # Size / / / / SPP MLE RUN TEE RSS Part # Size /8 X 1/ /4 X 1/ /4 X 1/ /8 X 1/ /8 X 1/ /8 X 3/ /2 X 1/ /2 X 3/ /2 X 1/ ll Fittings are Nickel Plated Part # Size /8 X 1/ /4 X 1/ /8 X 3/ /2 X 1/ MLE SPT TEE Part # Size / / / Part # Size / / / / FEMLE SPP CROSS Part # Size / / / Fax: sales@global-hose.com 113

114 RSS STEEL GRESE FITTINGS PIPE THRED # Meets SE #J-534C Many types available on special order. LL CHECK RSS FITTINGS Part # Size pprox /8" -27 NPT Thread Forming PIPE THRED # PIPE THRED LL CHECK 30 NGLE LL CHECK Part # Size pprox /8" -27 NPT /8" -27 NPT # Part # Size pprox /8" -27 NPT PIPE THRED 45 NGLE LL CHECK # Part # Size pprox /8" -27 NPT PIPE THRED 65 NGLE LL CHECK # Part # Size pprox /8" -27 NPT PIPE THRED 90 NGLE LL CHECK # Part # Size pprox /8" -27 NPT /8" -27 NPT PIPE THRED LL CHECK # K 5050 Part # Size pprox /4" -18 NPT Phone:

115 RSS FITTINGS STEEL GRESE FITTINGS PIPE THRED # NGLE LL CHECK Part # Size pprox /4"-18 NPT RSS 1/4-28 TPER THRED SHORT LL CHECK # Part # Size pprox /4"-28 NPT Thread Forming /4-28 TPER THRED LONG LL CHECK # Part # Size pprox /4"-28 Taper Thread /4-28 TPER THRED EXTR LONG LL CHECK # Part # Size pprox /4"-28 Taper Thread /4-28 TPER THRED SHORT 45 LL CHECK # Part # Size ngle pprox /4"-28 Taper Thread /4"-28 Taper Thread /4-28 TPER THRED LONG 45 LL CHECK # Part # Size pprox /4"-28 Taper Thread /4-28 TPER THRED 90 NGLE LL CHECK # Part # Size pprox /4"-28 Taper Thread Thread Forming Fax: sales@global-hose.com 115

116 RSS STEEL GRESE FITTINGS DRIVE TYPE # DRIVE TYPE # DRIVE TYPE # METRIC # M METRIC # LL CHECK LL CHECK LL CHECK 45 NGLE RSS FITTINGS Part # Size pprox /16" Part # Size pprox /16" Part # Size pprox /4" Part # Size pprox. (mm) (mm) (mm) MM x Part # Size pprox. (mm) (mm) (mm) MM x METRIC # ZM NGLE Part # Size pprox. (mm) (mm) (mm) MM x METRIC # ZM METRIC # ZM METRIC # ZM NGLE Part # Size pprox. (mm) (mm) (mm) MM x Part # Size pprox. (mm) (mm) (mm) MM x NGLE Part # Size pprox. (mm) (mm) (mm) MM x Phone:

117 METRIC # ZM RSS FITTINGS STEEL GRESE FITTINGS Part # Size pprox. (mm) (mm) (mm) MM x RSS METRIC # ZM NGLE Part # Size pprox. (mm) (mm) (mm) MM x METRIC # ZM NGLE Part # Size pprox. (mm) (mm) (mm) MM x # Part # Size pprox /16" # Part # Size pprox /8" UTTON HED Part # Size pprox /8"-27 PTF /4"-18 NPT WHIP HOSE - EXCEEDS SE 100R1-T - use with hand grease guns only 10,000 PSI urst Pressure Rubber Hose Part # Length " RUER " RUER /16" ID 1/8" NPT Solid ase " RUER ,000 PSI Working pressure " RUER JW GRESE GUN COUPLER Provides quick, positive, leakproof connection w/ grease fittings. Part # pprox. 1/8" NPTF Fax: sales@global-hose.com 117

118 RSS D.O.T. IR RKE - NYLON TUING D.O.T. ir rake - Nylon Tubing RSS FITTINGS "" Dim. Thread Size Tub ube O..D 1/4 3/ 8 1/ 2 5/ 8 3/ 4 Threa hread Size- ize- 7/ / / / Typical pplication ir brake systems except where temperatures exceed F or where battery acid can drip on tubing. Pressure Maximum operating pressure of 150 PSI. Vibration Fair resistance. Temperature Range F to F (-40 0 C to C). Material C360 rass Used With NT Nylon Tubing - SE J844 Type and. Meets specifications and standards of SE and DOT FMVSS 571,106. ssembly Instructions 1- Cut tubing to desired length. 2-Slide nut and then sleeve on tubing. Threaded end of nut must face toward fitting body. 3-Insert tubing into the preassembled fitting. e sure tubing is bottomed in fitting. 4- Tighten nut to required torque as indicated on chart. Disassembling: Remove nut and pull tubing out of fitting body. Insert will remain in tubing. Reassembly: Push tubing and insert into fitting body until it bottoms. Thread nut onto fitting body and torque as in step 4. Tolerance +/-.02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical dvantages Easy to assemble (no tube preparation or flaring required.) uilt in tube support. Fittings utilize a ribbed sleeve for compression and positive grip. Fittings are pre-applied with thread sealent. May be used with copper tubing by replacing nut, sleeve and insert with long nut and spherical sleeve. Insert should be removed for copper tubing use. Tube Size dditional Number of Turns from Hand-Tight 1/4 3 3/8, 1/2 4 5/8, 3/4 3-1/ 2 You don't get anything clean without getting something else dirty. - Cecil axter Conformance 118 Phone:

119 SLEEVE RSS FITTINGS D.O.T. IR RKE - NYLON TUING SE# N 60NT 1460 Part # Tube O.D. pprox / / / / / RSS NUT SE# N 61NT 1461 Part # Tube O.D. pprox / / / / / UNION SE# N 62NT 1462 ULKHED UNION 62NH STINLESS STEEL INSERT 59 63NT 2 Part # Tube O.D. pprox / / / / / Part # Tube O.D. 1 2 pprox / / / For SE# J844 TUING Part # Tube O.D. pprox / / / / / Fax: sales@global-hose.com 119

120 RSS D.O.T. IR RKE - NYLON TUING RSS INSERT RSS FITTINGS Part # Tube O.D. pprox / / / / / TEE SE# N 264NT 1464 Part # Tube O.D. pprox / / / / REDUCING TEE 1 2 Part # Tube O.D. pprox. (1&2) x /8 x 1/ /2 x 3/ ELOW 65N 265NT 1465 SE# Part # Tube O.D. pprox / / / / FEMLE DPTER 66N 66NT NH SE# Part # Tube O.D. x pprox. Female NPT /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ Dimension data can change without notice. Please call us when dimensions are critical. Phone:

121 MLE DPTER 68N 68NT 1468 MLE ELOW 1469 RSS FITTINGS FEMLE ELOW D.O.T. IR RKE - NYLON TUING SE# Part # Tube O.D. x pprox. Male NPTF /4 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ SE# Part # Tube O.D. x pprox. Male NPTF /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /8 x 1/4 LONG /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 3/8 LONG /2 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ SE# RSS 70N NT Part # Tube O.D. x pprox. Female NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ /8 x 1/ Fax: sales@global-hose.com 121

122 RSS D.O.T. IR RKE - NYLON TUING MLE RUN TEE 71N 271NT Part # SE# Tube O.D. x Male NPTF x Tube O.D. 1x2x3 RSS FITTINGS pprox /4 x 1/8 x 1/ /4 x 1/4 x 1/ /8 x 1/4 x 1/ /8 x 1/4 x 3/ /8 x 3/8 x 3/ /2 x 3/8 x 1/ MLE RNCH TEE 1 72N 272NT 1472 SPECIL TEES Part # Tube O.D. x Tube O.D. x Male NPTF 1x2x3 pprox /4 x 1/4 x 1/ /4 x 1/4 x 1/ /8 x 3/8 x 1/ /8 x 1/4 x 1/ /8 x 3/8 x 1/ /2 x 1/2 x 1/ /8 x 3/8 x 3/ /2 x 3/8 x 3/ /2 x 1/2 x 3/ /2 x 1/2 x 1/ /8 x 5/8 x 1/ Part # SE# Tube O.D. x Tube O.D. x Female NPTF 1x2x3 pprox /8 x 3/8 x 1/ /8 x 5/8 x 1/ ELOW 6945N 279NT SE# Part # Tube O.D. x pprox. Male NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /8 x 1/ /4 x 1/ Phone:

123 RSS FITTINGS D.O.T. ir rake - Copper Tubing D.O.T. IR RKE - COPPER TUING RSS Thread Size Tub ube O.D.D.. Threa hread Size- ize- 1/4 3/ 8 1/ 2 5/ 8 3/ 4 7/ / / / Typical pplication ir brake systems. Pressure Maximum operating pressure of 150 PSI. Vibration Fair resistance. Temperature Range F to F (-53 0 C to C) with copper tubing. Material C360 rass. Used With Copper tubing in air brake systems. Tolerance +/-.02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Conformance Meets specifications and standards of SE and DOT. ssembly Instructions 1- Cut tubing to desired length. Make sure all burrs are removed and the ends are cut square. 2- Slide nut and then sleeve on tubing. Threaded end must face toward fitting body. 3- Insert tubing into fitting. e sure tubing is bottomed on fitting shoulder. 4- Thread nut onto fitting body until it is hand tight. 5- From that point, tighten with a wrench the number of turns indicated in the chart below: Tube Size 1/4, 3/8 1/2, 5/8, 3/4 dditional Number of Turns from Hand Tight 1-3/4 3-1/4 dvantages Easy to assemble (no flaring). May be used with nylon tubing by replacing long nut and spherical sleeve with insert, rigid sleeve and nut. Fax: sales@global-hose.com 123

124 D.O.T. IR RKE - COPPER TUING RSS FITTINGS SLEEVE SE# RSS Part # Tube O.D. pprox / / / / / NUT SE# Part # Tube O.D. pprox / / / / / UNION SE# Part # Tube O.D. pprox / / / / / TEE SE# Part # Tube O.D. pprox / / / / conference is a gathering of important people who singley can do nothing, but together can decide that nothing can be done. Dimension data can change without notice. Please call us when dimensions are critical. - Fred llen 124 Phone:

125 RSS FITTINGS D.O.T. IR RKE - COPPER TUING ELOW SE# Part # Tube O.D. pprox / * 3/ / / * Forged RSS FEMLE DPTER SE# Part # Tube O.D. x pprox. Female NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ MLE DPTER SE# Part # Tube O.D. x pprox. Male NPTF /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ /4 x 1/ /4 x 3/ Fax: sales@global-hose.com 125

126 D.O.T. IR RKE - COPPER TUING RSS FITTINGS 90 MLE ELOW SE# RSS Part # Tube O.D. x pprox. Male NPTF /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ /4 x 1/ LONG PTTERN ELOW Part # Tube O.D. x pprox. Male NPTF /8 x 1/ FEMLE ELOW SE# Part # Tube O.D. x pprox. Female NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /8 x 1/ MLE RUN TEE 1 2 Part # SE# Tube O.D. x Male NPTF (1&3)x2 pprox /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ Phone:

127 RSS FITTINGS MLE RNCH TEE D.O.T. IR RKE - COPPER TUING SE# Part # Tube O.D. x Male NPTF (1&2)x3 pprox /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ RSS MLE ELOW SE# Part # Tube O.D. x pprox. Male NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ * 1/2 x 3/ /2 x 1/ * Forged I'm throwing twice as hard as I ever did. The ball's just not getting there as fast. - Lefty Gomez Fax: sales@global-hose.com 127

128 D.O.T. IR RKE - HOSES/ENDS RSS FITTINGS D.O.T. ir rake - Hose/ Ends RSS Typical pplication ir rake hose connections. Meets SE & DOT specifications (FMVCS 10 GL) Pressure Determined by maximum working pressure for hose size. Up to 125 psi Material C360 rass. Temperature: F to F ( -40 C to +48 C ) dvantages Can be used for nearly any brake line. Easy to assemble with a good selection of hose end configurations. rass material offers excellent resistance against corrosion. Tolerance +/-.02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. ssembly Instructions 1- Slide nut and sleeve onto hose. Make sure bevel edge of sleeve faces out toward fitting. 2- Push hose into fitting until it bottoms. 3- Screw nut until contact is made with body hex. NOTE: When reassembling fitting, body and nut should be inspected. Only reuse if in proper condition. Sleeves should never be reused. 128 Phone:

129 RSS FITTINGS D.O.T. IR RKE - HOSES/ENDS SLEEVE #60HC Part # Hose I.D. pprox. Size / / RSS NUT #61HC Part # Hose I.D. pprox. Size / / NUT #61HCS D 31RSG Part # Hose I.D. Thread pprox. Size /8 31/ /2 1-3/ Nothing is impossible for the person who doesn't have to do it. - Weller's Law nyone who goes to a psychiatrist ought to have his head examined - Sam Goldwyn Fax: sales@global-hose.com 129

130 RSS D.O.T. IR RKE - HOSES/ENDS SPRING #60SG C 377 C RSS FITTINGS Part # Hose I.D. C pprox / / UNION #62HC 3380-Y0 362 Part # Hose I.D. Thread pprox /8 31/ /2 1-1/ FEMLE CONNECTOR HOSE 2 1 Part # Hose I.D. 1 2 pprox. x Female S /8 x 3/ /2 x 7/ #66S 66RSV 3380-Y7 386 MLE CONNECTOR #68S DPTER #68S Y R Part # Hose I.D pprox. x Male Pipe /8 x 1/ /2 x 3/ Part # Male S S pprox. x Male Pipe Thread /8 x 1/4 3/ /8 x 3/8 3/ /8 x 1/2 3/ /2 x 3/8 7/ /2 x 1/2 7/ Phone:

131 RSS FITTINGS D.O.T. IR RSS RKE FITTINGS - HOSES/ENDS NUT ND SPRING SSEMLY Part # Hose I.D. pprox. Size / / RSS RSG DPTER ODY #68 W1391Z Part # Hose I.D. pprox. x Male Pipe /8 x 1/ /8 x 3/ /8 x 1/ /2 x 3/ /2 x 1/ MLE DPTER #68HC Y2 68R Part # Hose I.D. pprox. x Male Pipe /8 x 1/ /8 x 3/ /8 x 1/ /2 x 3/ /2 x 1/ MLE DPTER #68HCS 3380-Y3 68RGS 378 Part # Hose I.D. pprox. x Male Pipe /8 x 1/ /8 x 3/ /8 x 1/ /2 x 3/ /2 x 1/ Fax: sales@global-hose.com 131

132 RSS D.O.T. PUSH-IN D.O.T. PUSH-IN TUE FITTINGS Meets D.O.T. FMVSS SE J1131 ir rake System Requirements enefits for Cost Savings & Engineering Project Fast assembly: No tools required. Simply push tubing in. Saves up to 75% of assembly time compared to standard air compression fittings. No loose parts to handle. Fast disconnect: Hold the collet collar with two fingers and pull out tube. No tools required. Reusable: Can be connected and disconnected several times. Reliable sealing: Using recommended tubing, full sealing is guaranteed. Versatility: una N O'ring standard. Viton and others available per request. Secure Tube Retention. Pulling on tubing only serves to tighten the connection. Pre-pplied Teflon based pipe sealant on all male pipe threads, saving customer additional labor. Full Flow Design, provides more flow area than conventional fittings with internal tube supports even in the swivels. RSS FITTINGS lation of tubing. ll male threads have a pre-applied Teflon based pipe sealant to provide for easy assembly and leak proof seal. Materials: C360 rass - arstock C377 - Forged "O" Ring: una - Nitrile (90 Durometer) EP (Ethylene Propylene) Working Pressures & Temperature Ranges Vacuum to 150 PSI -40 F to 200 F ( -40 C to +93 C ) DOT Fittings are constructed with an all brass captive eyelet which allows for maximum flow. The brass captive eyelet with extended length is floating and has a machined top end radius for easy instal- 132 MLE 45 ELOW Forged Q54DOT 179MTNS 1880 DQ54DOT MLE 45 SWIVEL ELOW Q54DOTS 179PMT 1880 DQ54DOTS Phone: ody Size Part # Tube O.D. x ody pprox. Male NPTF Size /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ /4 x 1/ /4 x 3/ Part # Tube O.D. x pprox. Male NPTF S 1/4 x 1/ S 1/4 x 1/ S 3/8 x 1/ S 3/8 x 1/ S 3/8 x 3/ S 1/2 x 1/ S 1/2 x 3/ S 1/2 x 1/ S 5/8 x 1/ Dimension data can change without notice. Please call us when dimensions are critical.

133 RSS FITTINGS D.O.T. PUSH-IN PLUG 1829 DQ59DOT 639PMT Part # Tube O.D. pprox / / / / RSS UNION Q62DOT 62PMT 1862 DQ62DOT NEW Part # Tube O.D. pprox / / / /8" x 1/4" / / / UNION TEE ody Size NEW Part # Tube O.D. ody pprox. Size / / / /8" Q64DOT 164 PMT 1864 DQ64DOT UNION ELOW Q65DOT 165 PMT 1865 DQ65DOT ody Size Part # Tube O.D. ody pprox. Size / / / / Fax: sales@global-hose.com 133

134 D.O.T. RSS PUSH-IN FITTINGS RSS FITTINGS FEMLE CONNECTOR RSS Q66DOT 66PMT 1866 DQ66DOT Part # Tube O.D. x pprox. Female NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /2 x 1/ MLE CONNECTOR Q68DOT 68PM 1868 DQ68DOT 68PMT NEW Part # Tube O.D. x pprox. Male NPTF /32 x 10/ /32 x 1/ /32 x 1/ /16 x 1/ /4" x 1/16" /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ /4 x 1/ /4 x 3/ bus station is where a bus stops. train station is where a train stops. On my desk, I have a work station. 134 Phone:

135 RSS FITTINGS D.O.T. PUSH-IN MLE ELOW ody Size ody Size Q69DOT 169 PMTNS 1869 DQ69DOT Forged arstock Part # Tube O.D. x ody pprox. Male NPTF Size * 5/32 x 1/ * 5/32 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ /8 x 3/ /8 x 1/ /4 x 1/ /4 x 3/ * arstock RSS MLE SWIVEL ELOW Q69DOTS 169PMT 1869 DQ69DOTS Forged NEW Part # Tube O.D. x pprox. Male NPTF S 5/32" x 1/8" S 1/4 x 1/ S 1/4 x 1/ S 1/4 x 3/ S 3/8 x 1/ S 3/8 x 1/ S 3/8 x 3/ S 3/8 x 1/ S 1/2 x 1/ S 1/2 x 3/ S 1/2 x 1/ S 5/8 x 3/ S 5/8 x 1/ S 3/4 x 1/ S 3/4 x 3/ bank is a place that will lend you money, if you can prove that you don't need it. Fax: sales@global-hose.com 135

136 RSS D.O.T. PUSH-IN FEMLE ELOW ody Size Q70DOTS 1870 DQ70DOTS 170PMTNS ody Size Forged arstock RSS FITTINGS Part # Tube O.D. x ody pprox. Female NPTF Size /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ * 1/2 x 1/ * 1/2 x 3/ /2 x 1/ * arstock FEMLE SWIVEL ELOW NEW Part # Size S 1/4 x 1/4" 9.13 MLE RUN TEE ody Size 1 2 Q71DOT 171PMTNS 1871 DQ71DOT 3 Forged NEW NEW NEW NEW Part # Tube O.D. x Male NPTF (1 x 3) x 2 ody Size pprox /4 x 1/ (1/4" x 3/8") x 1/4" /4 x 1/ /8 x 1/ (3/8" x 1/4") x 1/4" /8 x 3/ (3/8" x 1/4") x 3/8" /8 x 1/ /2 x 3/ /2" x 1/4" Knowledge is knowing a tomato is a fruit; Wisdom is not putting it in a fruit salad. 136 Phone:

137 RSS FITTINGS D.O.T. PUSH-IN MLE SWIVEL RUN TEE Forged Part # Tube O.D. x pprox. Male NPTF S 1/4 x 1/ S 1/4 x 1/ S 3/8 x 1/ S 3/8 x 3/ S* 1/2 x 1/ S 1/2 x 3/ S 1/2 x 1/ * arstock RSS Q71DOTS 171PMT 1871 DQ71DOTS arstock MLE RNCH TEE ody Size Forged ody Size 3 arstock 2 2 NEW NEW Part # Tube O.D. x Male NPTF (1 x 2) x 3 ody Size pprox * 3/16 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ (3/8" x 1/4") x 1/4" /8 x 3/ /2 x 1/ /2 x 3/ /2 x 1/ (5/8" x 1/2") x 1/2" * arstock Q72DOT 172PMTNS 1872 DQ72DOT The early bird might get the worm, but the second mouse gets the cheese. Fax: sales@global-hose.com 137

138 D.O.T. PUSH-IN RSS FITTINGS RSS MLE SWIVEL RNCH TEE Q72DOTS 172PMT 1872 DQ72DOTS FEMLE RNCH TEE Forged NEW Part # Tube O.D. x pprox. Male NPTF S 1/4 x 1/ S 1/4 x 1/ S 3/8" x 1/8" S 3/8 x 1/ S 3/8 x 3/ S 1/2 x 1/ S 1/2 x 3/ S 1/2 x 1/ Part # Size /4 x 1/8" /4" x 1/4" /8" x 1/4" GLDHND ULKHED CONNECTOR NEW Part # Size /2" x 1/2" ULKHED UNION Q82DOT 62PMTH 1874 DQ82DOT Part # Tube O.D. pprox / / / / FEMLE ULKHED UNION 1 2 Part # Tube O.D. x 1 2 pprox. Female NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ Q86DOT 1873 DQ86DOT 66PMTH Phone:

139 RSS FITTINGS RSS SPLIT SLEEVE D.O.T. FITTINGS (5/32 O.D.) Ideally suited for use in passive protected air transmission applications. specially designed slotted sleeve helps eliminate notch stress related to over torque. COLLET Part # Tube O.D /32" /8" 1.43 NUT Part # Tube O.D /32" /8" 1.30 DOULE END UNION Part # Tube O.D /32" /8" 7.50 CONNECTOR IR RKE - TUING IR RKE TUING SE J844, Type 3 & & DOT FMVSS 106 Nylon inner tube with open ply nylon fiber reinforcement and nylon cover F to F temperature range. 150 P.S.I. max. working pressure. More colors available. Part # Type Color Length /8 lack 100' /4 lack 100' R 1/4 Red 100' U 1/4 lue 100' /4 lack 500' IR RKE TUING Part # Type Color Length /8 lack 100' U 3/8 lue 100' Y 3/8 Yellow 100' /8 lack 500' /2 lack 100' R 1/2 Red 100' /2 lack 500' /8 lack 100' /4 lack 100' NOTE: The Synflex, Parker and Eaton tubing must be torqued at 47 in. pounds. ny other 5/32 DOT tubing used, tubing or fitting manufacturer should be contacted for proper torque requirements. FUEL LINE ND VPOR EMISSION RSS Part # Tube Pipe Thread O.D /32" 1/16" /32" 1/8" /8" 1/16" /8" 1/8" 7.20 ELOW Part # Tube Pipe Thread /32" 1/8" /8" 1/8" 7.58 SE 30R7 Nitrile tube w/ spiral synthetic cord, hypalon cover. 50 p.s.i. working pressure. 1/2-35 PSI F to F temperature range. Low pressure/ high temperature fuel for cars, light trucks, and small engines. Meets SE J1402 Part # ID OD Length /16 13/32 25' /16 9/16 25' /4 1/2 25' /8 5/8 50' Fax: sales@global-hose.com 139

140 NYLON 12 D.O.T. TUING NYLON 12 D.O.T. TUING RSS FITTINGS RSS Our Nylon 12 D.O.T. Tubing is ideal for use on vehicles for instrumentation and pneumatic accessories connected to the air brake system. It also has outstanding tensile strength and chemical resistance. It meets SEJ 844 Type "" Specifications for use on ir rake systems. Features Strong Lightweight Flexible brasion Resistant Heat Resistant Chemical Resistant Specifications Hardness: Rockwell 78 R Shore D 70 Temperature Range: -40 F to +200 F Vacuum Rating: To 28" Hg Meets SEJ 844 Type "" Specifications pplications ir rake Lines Pneumatic Tools Pneumatic Piping Instrumentation Lube Lines Coolants Refrigeration Chemical Transfer Vacuum Process Control Fuel Lines Paint Supply Lines Colors vailable: lack= Replace N in part number with a for lack Tubing - Part numbers shown are for natural. 100' LENGTH Part # O.D. I.D. Wall end Minimum urst Package Thickness Radius F (PSI) Weight (lbs) 38600N 1/8".080".023".375" N 5/32".106".025".500" N 1/4".180".040" 1.000" N 5/16".267".023" 1.250" ' LENGTH Part # O.D. I.D. Wall end Minimum urst Package Thickness Radius F (PSI) Weight (lbs) 38600N5 1/8".080".023".375" N5 5/32".106".025".500" N5 1/4".180".040" 1.000" N5 5/16".267".023" 1.250" ' LENGTH Part # O.D. I.D. Wall end Minimum urst Package Thickness Radius F (PSI) Weight (lbs) 38600N1 1/8".080".023".375" N1 5/32".106".025".500" N1 1/4".180".040" 1.000" N1 5/16".267".023" 1.250" Lead Free fittings available on pgs Phone:

141 RSS FITTINGS IR RKE - CCESSORIES Length Catalog Number 3/16" O.D. STEEL RKE LINES FOR DOMESTIC VEHICLES Catalog Number 1/4" O.D. Catalog Number 5/16" O.D. Catalog Number 3/8" O.D. 6" " " " " " " " " " RSS NOTE: 3/16 and 1/4 tube assemblies have one long and one short inverted flare nut. IR RKE CCESSORIES HEX LL FOOT CHUCK GLDHND COUPLINGS Die Cast luminum ody Conforms to SE J318 Connects to 1/2 pipe Part # /4" Female Pipe 3.07 LL FOOT CHUCK WITH 1/4 I.D. HOSE R SERVICE (Signal) lue Part # connects only to service EMERGENCY (Supply Line) Red Part # connects only to emergency UNIVERSL - Gold Part # connects to both styles GLDHND SEL Part # Full Face 1.58 Part # /4" I.D DUL FOOT CHUCKS DFG-1 Standard straight-on chuck with 30 0 reverse angle chuck. Part # /4" NPT Female Thread NGLE CHUCK For inner dual wheels with tilted valves. Has 6 extension and 1/4 NPT female thread. 9994l Part # /4" NPT Female Thread 9.53 Fax: sales@global-hose.com 141

142 RSS IR RKE - HOSES IR RKE HOSES IR RKE HOSE RSS FITTINGS COILED IRRKE TUE SSEMLIES Spiral synthetic cord reinforcement with neoprene cover F to F temperature range. Max opperating pressure 255 psi Max IR burst CHUCKS pressure 900 psi Meets SE J1402 RED Part # ID OD Length /8 3/4 50' /2 7/8 50' lue REMOTE CONTROL DRIN VLVES REMOTE CONTROL DRIN VLVES rass ody and stainless steel spring. Steel cable, nylon coated, certified to 200lbs pull test. Low profile to minimize accidental hits and damages. Pipe thread 1/4 NPTF. Part # Length Standard 48" Standard 60" Conforms to SE J844 Type and SE J1131. Conforms to DOT FMVSS Maximum Working Pressure 150 PSI, Minimum urst 950 PSI. Temperature Range F to F. rass end with spring guards and 1/2 male pipe connectors. Spring guards zinc plated for maximum corrosion resistance. Color coding, red for emergency and blue for service, provides you with error free installation. Preassembled for immediate installation. 1/2 O.D. with 1/2 fitting. Each contains 1 red, 1 blue. Part # Working Pigtail Length Length ' 6" ' 12" ' 12" Phone:

143 RSS FITTINGS RSS FUEL HOSE FITTINGS Typical pplication: Low pressure air, fuel and oil applications. Generally used for automotive, light truck, and small engine fuel lines. Use with fuel hose SE 30R7 & SE 30R9. dvantages: Easy to assemble, just push the fitting into the hose & clamp. Good selection of configurations at reasonable cost. MLE CONNECTOR HOSE R X MLE PIPE Part # Hose ID Size Ind # /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /8 1/ /8 1/ /8 3/ /2 3/ /2 1/ /8 3/ /8 1/ /4 1/ /4 3/ / INVERTED FLRE MLE CONNECTOR HOSE R X INVERTED FLRE Part # Hose ID Inv. Ind # Flare /16 1/ /16 5/ /16 3/ /8 5/ /8 3/ See Hose Clamps starting on page 273 IR RKE - FITTINGS 90 0 MLE ELOW HOSE R X MLE PIPE Part # Hose ID Size Ind # /4 1/ /16 1/ /16 1/ /8 1/ /8 1/ /8 3/ /2 3/ /2 1/ /8 3/ /8 1/ /4 1/ INVERTED FLRE MLE SWIVEL 90 0 ELOW HOSE R X TUE O.D. Part # Hose ID Tube Ind # /16 5/ /8 3/ LONG STREET ELLS Part # Size Length /8 1-3/16" /8 1-7/16" /8 1-11/16" /4 1-3/16" /4 1-7/16" /4 1-11/16" /4 2-1/4" /8 1-3/4" EXTENSION DPTERS D.O.T. Part # Size Length /8 1-1/4" /8 1-3/4" /4 1-9/16" /4 1-13/16" /4 2-1/16" 7.31 RSS Fax: sales@global-hose.com 143

144 RSS DRIN COCKS For use with low pressure air, water and fluids. Designed for a working pressure of 150 PSI. Hand-tightening provides a metal-to-metal seal. Not intended for natural gas, LPG, nuclear or aircraft applications. GSOLINE SHUT OFF w/ SCREEN FILTER 827 C DRIN COCKS RSS FITTINGS Part # arb C pprox. X Male Pipe /4 x 1/ IR TNK DRIN VLVE - Self Sealing w/ 5ft. remote cable 150 PSI Part # Male Pipe pprox / DRIN COCK 150 PSI - Trunk ir Tank DCR601-4 Part # Male Pipe pprox / TRUCK DRIN P.S.I.G SHUT OFF P.S.I max. 2 #60HC LEVER HNDLE Part # Male Pipe Industry pprox. Number / /4 W Part # Male Pipe Industry pprox. x Female Pipe Number /4 W D DC601 Part # Male Industry pprox. Pipe Number /8 M-41-P /4 M-42-P /8 M-43-P /2 M-44-P Phone:

145 INTERNL SET DC INTERNL SET H - 5/ LONG INTERNL SET 809 TEE HNDLE - Internal Seat DC RSS FITTINGS Closed Closed DRIN COCKS Part # Male Industry pprox. Pipe Number / Part # Male Industry pprox. Pipe Number / / / Part # Size Ind # pprox /8 MIP /8 Hose I.D Part # Male Industry pprox. Pipe Number /8 M-200-P /4 M-201-P /8 M-202-P RSS EXTERNL SET w/ SPOUT 200 Part # Male Industry pprox. 239 Pipe Number DC * 1/ * Replaces GM # & Chrysler # I NEEDLE VLVE -.38 Hose ID 804 DC DH C Part # Male Industry C pprox. Pipe Number / / / RDITOR TYPE - External Seat Part # Male Industry Ind # pprox. 320D Pipe Number /8 M-320-P DC /4 M-321-P /8 M-322-P / Fax: sales@global-hose.com 145

146 SHUT-OFF COCKS RSS FITTINGS RSS Designed for automotive or industrial use. G approved shut-off cocks approved for LPG and natural gas applications. Lubricant may wash out at higher pressures or with some exotic fluids. Designed for working pressure of 30 PSI. Forged brass bodies and brass handles. Instantaneous off-on operation with rotation. FLRE X MLE PIPE Part # Male Flare X Male Pipe Ind. # pprox /4 x 1/8 27SE /4 x 1/4 227SE /16 x 1/8 29SE /16 x 1/4 229SE /8 x 1/4 57SE /2 x 3/8 67SE V402F 848 FLRE X FLRE 842 V203F 136C Part # Male Flare Ind. # pprox. X Male Flare /4 28SE /16 30SE /8 58SE /2 68SE /8 1010SE * Please request G valves FLRE X FEMLE PIPE 138C 2046 Part # Male Flare Ind. # pprox. X Female Pipe /8 x 3/8 163SE /8 x 1/2 161SE * 3/8 x 1/2 161SE /2 x 1/2 164SE /8 x 1/2 164SE * Heater Valve Dimension data can change without notice. Please call us when dimensions are critical. 146 Phone:

147 RSS FITTINGS SHUT-OFF COCKS COMPRESSION X MLE PIPE 868 V304C 2068 COMPRESSION X COMPRESSION V3030F C 133C VC206 * See pg. 72 to order nut and sleeve separately. Part # Comp Ind. # pprox. X Male Pipe /4 x 1/8 27-C /4 x 1/4 227-C /16 x 1/8 29-C /8 x 1/4 57-C * See pg. 72 to order nut and sleeve separately. Part # Comp Ind. # pprox. X Comp /4 28-C /16 30-C /8 58-C /2 68-C RSS FEMLE X FEMLE PIPE V403P 132C 875 Part # Female Pipe pprox. X Female Pipe / / T* 1/ / * 150 PSI MLE PIPE X FEMLE 880 V402P 130C 1 MLE PIPE X MLE PIPE 2 Part # Male Pipe Ind. 1 2 pprox. X Female Pipe # /8 48-P /4 49-P T* 1/ /8 50-P * 150 PSI 1V401P 890 Part # Male Pipe Ind. # pprox. X Male Pipe /8 76-P /4 77-P T* 1/ /8 78-P * 150 PSI Fax: sales@global-hose.com 147

148 RSS IR COCKS RSS FITTINGS RSS For use on low pressure air systems. Designed for working pressure of 80 PSI at moderate temperatures. Spring-key type cocks of all brass construction with stainless steel springs. Machine finish is standard. Polished or plated finish available at extra cost. MI X I tee handle no hex Part # MIP x I Ind. pprox. # / / MIP X I lever handle no hex Part # MIP x I Ind. pprox. # / / MIP X I tee handle hex Part # MIP x I Ind. pprox. # / / / MIP X I lever handle hex Part # MIP x I Ind. pprox. # / / / / Dimension data can change without notice. Please call us when dimensions are critical. 148 Phone:

149 RSS FITTINGS RSS IR COCKS MIP X MIP tee handle hex Part # MIP X MIP Ind. pprox. # / / / / RSS MIP X MIP lever handle hex Part # MIP X MIP Ind. pprox. # / / / / MIP X I NOSE tee handle hex Part # MIP Ind. pprox. X I NOSE # / / MIP X I NOSE lever handle hex Part # MIP Ind. pprox. X I NOSE # / / / / Lead Free fittings available on pgs Fax: sales@global-hose.com 149

150 RSS RSS IR COCKS FIP X FIP tee handle no hex RSS FITTINGS Part # FIP X FIP Ind. pprox. # / / / FIP X FIP lever handle no hex Part # FIP X FIP Ind. pprox. # / / / FIP X FIP tee handle hex Part # FIP X FIP Ind. pprox. # / / / FIP X FIP lever handle hex Part # FIP X FIP Ind. pprox. # / / / / Whenever I fill out an application, in the part that says, "If an emergency, notify:" I put "DOCTOR". 150 Phone:

151 RSS FITTINGS RSS IR COCKS MIP X FIP tee handle no hex Part # MIP X FIP Ind. pprox. # / / / RSS MIP X FIP tee handle hex Part # MIP X FIP Ind. pprox. # / / / / MIP X FIP lever handle no hex Part # MIP X FIP Ind. pprox. # / / / / MIP X FIP lever handle hex Part # MIP X FIP Ind. # pprox / / / / Dimension data can change without notice. Please call us when dimensions are critical. Fax: sales@global-hose.com 151

152 NEEDLE VLVES NEEDLE VLVES RSS FITTINGS RSS Made with either pin handle or pressed on handle. Please specify if you have a preference. Used on instrumentation, hydraulic, and pneumatic systems. Designed for a maximum working pressure of 150 PSI. COMP X MLE PIPE Provided with steel handles and metal-to-metal seats with fine-thread screwdown. Not designed for natural gas, LPG, nuclear or aircraft applications. lways install with pressure against the seat. NV106C Part # Comp Ind. # pprox. X Male Pipe /16 x 1/8 M-133-C /4 x 1/8 M-101-C X Heavy Pattern M-101-C /4 x 1/4 M-101-C /16 x 1/8 M-102-C /8 x 1/4 M-143-C COMP X MLE PIPE-NGLE C C Part # Comp Handle Ind. # C pprox. X Male Pipe /16 x 1/8 M-33-C /4 x 1/8 M-103-C X Heavy Pattern M-103-C /4 x 1/4 M-104-C /16 x 1/8 M-104-C /16 x 1/4 M-104-C /8 x 1/4 M-303-C NV104C COMP X COMP Part # Comp Handle Ind. # pprox. X Comp /16 M-105-C /4 M-106-C /16 M-107-C /8 M-113-C NV105C Phone:

153 RSS FITTINGS NEEDLE VLVES FLRE X MLE PIPE FLRE X MLE PIPE Part # Male Flare Handle Ind. # pprox. X Male Pipe /4 x 1/8 M-104-SE /4 x 1/4 M-1040-SE /8 x 1/4 M-108-SE NV103F RSS NV101F C Part # Male Flare Ind. # C pprox. X Male Pipe /4 x 1/8 M-103-SE /16 x 1/8 M-203-SE /16 x 1/4 M-204-SE /8 x 1/4 M-303-SE FLRE X FLRE NV102F MULTI-PURPOSE IR VENT 705 MLE PIPE TO MLE PIPE Part # Male Flare Ind. # pprox. X Male Flare /4 M-110-SE /8 M-115-SE Part # Male Pipe pprox / NV107P Part # Male Pipe Handle Ind. # pprox. X Male Pipe /8 M-108-P X 1/8 M-108-P /4 M-110-P Fax: sales@global-hose.com 153

154 NEEDLE VLVES RSS FITTINGS RSS NV109P Part # Female Pipe Ind. # pprox. X Female Pipe /8 M-304-P /4 M-3044-P P 1/4 Heavy M-3044-P MLE X FEMLE PIPE NV108P Part # Male Pipe Handle Ind. # pprox. X Female Pipe /8 M-305-P /4 M-3055-P L 1/4 Light Pattern M-3055-P FLOW CONTROL NEEDLE & CHECK VLVES Precision calibrated dial to determine and allow a return to required flow settings. Safe positive stop for needle travel. Positive no-leak stem seal. CHECK VLVE 2PSI cracking pressure PSI maximum operating pressure. One piece forged housing. Nickel Plated available. Suitable for natural gas. Part # Size pprox / FLOW CONTROL Part # Size pprox / / NEEDLE VLVE Part # Size pprox / / Phone:

155 RSS FITTINGS SCREW STEM SHUT-OFF VLVES NEEDLE VLVES NEEDLE VLVES are constructed to meter fluids and gases. They are O-RING SELED to eliminate valve maintenance. The O-ring is positioned between the actuating threads and the seat, and seals the closely fitted cylinder to give the lowest possible internal volume and protect threads from contamination. NEEDLE VLVES have a medium tipped stem (37 0 ) to offer RPID SHUT OFF, FULL FLOW and a SEMI- METERING FUNCTION. The standard construction is a forged brass body, brass stem, thrust washer, cap and a UN N O - RING seal. This valve is rated for 1,000 p.s.i.g. service from to F. FCTORY MUST E CONSULTED WHEN VLVES RE TO E USED WITH FLMMLE FLUIDS IN ORDER TO DETERMINE WORKING PRESSURE ND O-RING COMPTIILITY. COMPRESSION ND FLRE ENDS CN E SUSTITUTED FOR PIPE ENDS IN MOST CSES. ( on application ) NEEDLE VLVES MIP X FIP NGLE Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Female Regular /8 Male x 1/8 Female Panel /4 Male x 1/4 Female Regular MIP X MIP NGLE Part # Pipe Thread Style Maximum Inlet Outlet Orifice /8 Male x 1/8 Male Regular /8 Male x 1/8 Male Panel /4 Male x 1/4 Male Regular /4 Male x 1/4 Male Panel FIP X FIP NGLE Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Female x 1/8 Female Regular /8 Female x 1/8 Female Panel /4 Female x 1/8 Female Regular /4 Female x 1/4 Female Panel SELF PIERCING SDDLE VLVES RSS MIP X FIP STRIGHT Part # Pipe Thread Style Maximum Inlet Outlet Orifice /8 Male x 1/8 Female Regular /8 Male x 1/8 Female Panel /4 Male x 1/4 Female Regular /4 Male x 1/4 Female Panel MIP X MIP STRIGHT Part # Pipe Thread Style Maximum Inlet Outlet Orifice /8 Male x 1/8 Male Regular /8 Male x 1/8 Male Panel /4 Male x 1/4 Male Regular /4 Male x 1/4 Male Panel FIP X FIP STRIGHT Part # Pipe Thread Style Maximum Inlet Outlet Orifice /8 Female x 1/8 Female Regular /8 Female x 1/8 Female Panel /4 Female x 1/4 Female Regular /4 Female x 1/4 Female Panel FITS 3/8 OD THRU 3/4 OD SELF PIERCING NEEDLE VLVE KIT #M-104-VSP INDIVIDULLY GGED WITH NEEDLE VLVE SDDLE CLMP 2 NUTS 2 OLTS & WSHERS Has brass sleeve for copper tube installation & delrin sleeve & brass insert for plastic tube installation. Part # Tube O.D. Min Pkg Qty /4" SPECIL VERSIONS Many special versions of these valves have been produced for other services. If your application is not described here or covered by our recommendations, please contact us. It is quite possible that one of these valve types can be economically adapted to your requirements. Fax: sales@global-hose.com 155

156 RSS MICRO-METERING VLVES MICRO-METERING VLVES MICRO-METERING VLVES offer PRECISE FLUID CONTROL through a full metering tip ( 5 0 ) and lubricated micrometer threads. Our O-ring seal arrangement eliminates contamination of system media by the thread lubricant. The standard constuction is forged brass body, brass stem and cap, a CELCON thrust bearing and a UN N O -RING seal. It is rated for 3,500 p.s.i.g. service from to F. Many variations and modifications have been made in these valves to accomodate customer applications. It is quite possible they can be economically adapted to your requirements. RSS FITTINGS MIP X FIP NGLE Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Female Regular /8 Male x 1/8 Female Panel /4 Male x 1/4 Female Regular MIP X FIP STRIGHT Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Female Regular /8 Male x 1/8 Female Panel /4 Male x 1/4 Female Regular /4 Male x 1/4 Female Panel MIP X MIP STRIGHT Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Male Panel /4 Male x 1/4 Male Regular /4 Male x 1/4 Male Panel FIP X FIP STRIGHT Part # Pipe Thread Style Maximum Inlet Outlet Orifice /8 Female x 1/8 Female Regular /8 Female x 1/8 Female Panel /4 Female x 1/4 Female Regular /4 Female x 1/4 Female Panel MIP X MIP NGLE Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Male Regular /8 Male x 1/8 Male Panel /4 Male x 1/4 Male Regular /4 Male x 1/4 Male Panel FIP X FIP NGLE Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Female x 1/8 Female Panel /4 Female x 1/4 Female Regular /4 Female x 1/4 Female Panel COMPRESSION ND FLRE ENDS CN E SUSTITUTED FOR PIPE ENDS IN MOST CSES Some valves only available on made-to-order basis. I didn't say it was your fault, I said I was blaming you. Dimension data can change without notice. Please call us when dimensions are critical. 156 Phone:

157 RSS FITTINGS TOGGLE VLVES TOGGLE SHUT OFF VLVES are constructed to INSTNTNEOUSLY OPEN and CLOSE the flow of fluids and gases. It is ideally suited for use in gas sampling and analysis systems as well as test equipment. This valve is O-RING SELED to eliminate leakage and maintenance. The O-ring is positioned between the operating mechanism and the seat, and seals the closely fitted cylinder to give the lowest possible internal volume and protect the mechanism from contamination. The standard construction is forged brass body, brass cylinder, cap and lever, Viton seat, UN N O RING seal, steel spring, and stainless steel lever pin. This valve is rated for 200 p.s.i.g. service from to F and is available in the angle and straight pattern, both of which are available for panel or bracket mounting. MIP X FIP NGLE MIP X MIP NGLE TOGGLE COCKS Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Female Panel /4 Male x 1/4 Female Regular /4 Male x 1/4 Female Panel Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Male Regular /4 Male x 1/4 Male Regular /4 Male x 1/4 Male Panel RSS MIP X FIP STRIGHT Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Female Regular /8 Male x 1/8 Female Panel MIP X MIP STRIGHT Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Male x 1/8 Male Panel /4 Male x 1/4 Male Regular /4 Male x 1/4 Male Panel FIP X FIP NGLE Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Female x 1/8 Female Regular /8 Female x 1/8 Female Panel /4 Female x 1/4 Female Regular COMPRESSION ND FLRE ENDS CN E SUSTITUTED FOR PIPE ENDS IN MOST CSES Some valves only available on made-to-order basis If you don't know where you're going, you don't know when you're lost. FIP X FIP STRIGHT Part # Pipe Thread Inlet Outlet Style Maximum Orifice /8 Female x 1/8 Female Regular /8 Female x 1/8 Female Panel /4 Female x 1/4 Female Regular /4 Female x 1/4 Female Panel Unknown uthor Fax: sales@global-hose.com 157

158 INDUSTRIL INSTRUMENTTION LL VLVES RSS FITTINGS RSS INDUSTRIL INSTRUMENTTION LL VLVES With Double O-RING STEM SELS provide 20,000 leak-free performance cycles without leakage. Valves also have an exclusive stem seal design that never needs tightening and can be panel mounted for instrumentation applications. For systems with working pressures up to 1,500 p.s.i.g. TEFLON all Seats low Out Proof Stem Seal Double O-Ring Up to 1,500 P.S.I. INDUSTRIL INSTRUMENTTION NGLE LL VLVES FEMLE X FEMLE Part # Size /8 x 1/ /8 x 1/ /4 x 1/ /4 x 1/ INDUSTRIL INSTRUMENTTION 3-WY LL VLVES Part # Size /8 FPT /4 FPT /8 FPT /2 FPT FEMLE X FEMLE Part # Size /8 x 1/ /4 x 1/ /8 x 3/ /2 x 1/ FEMLE X MLE FEMLE X MLE (ottom) Part # Size /8 x 1/ /8 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /8 x 1/ MLE X MLE PIPE THREDS ny size and ny combination of male pipe, female pipe, hose barb, compression or flare connections are available...just ask! Some valves only available on made-to-order basis Part # Size /8 x 1/ /4 x 1/ /2 x 1/ Part # Size /8 x 1/ /8 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ MLE X MLE Part # Size /8 x 1/ /4 x 1/ /8 x 3/ /2 x 1/ HOSE R X MLE PIPE THRED Part # Size HOSE I X MLE PIPE THRED Part # Size Part # Size /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ Research is what I'm doing when I don't know what I'm doing. - Wernher von raun Part # Size /4 x 1/ /8 x 1/ Phone:

159 RSS FITTINGS THREE ND FOUR-WY SELECTOR VLVES NON-LURICTED PLUG VLVES are designed to operate in systems where INSTNTNEOUS PORT SELECTION is desired. Since LURI- CNTS RE NOT USED, relubrication is not required. There is no lubricant to freeze and lock the valve or to contaminate fine fluids. The O-RING SELED CP and STEM eliminate leakage to atmosphere. The mating RSS ODY and CELCON PLUG produce a fine seal that WILL NOT SEIZE OR GLL. Designed for PNEL or RCKET MOUNTING. They are generally recommended for operation in GS- OLINE, OIL, IR, WTER and DETERGENT systems from minus 40 0 to F, at a maximum operating pressure of 30 p.s.i.g. The fluid port size is 9/32 (.281) diameter for 1/8 and 1/4 sizes, 5/16 (.312) diameter for the 3/8 size. (Consult factory for applications requiring a higher pressure). Type 1 (Standard) pronounced click may be felt at each position. Handle travel is not restricted. PNEL MOUNTING VILLE Part # THREE-WY VLVES (Side Outlet) V406P LESS CLICK Openings: Handle Pointer over...valve Open -C Handle Pointer over C...Valve Open -C Handle Pointer over...valve OFF Handle Pointer over racket...valve OFF THREE-WY VLVES (ottom Outlet) c --C Female Pipe Thread LESS CLICK Length of Stem /4 1-3/8" /8 1-3/8" M-108-MID WITH CLICK Part # --C Length Female Pipe of Thread Stem /8 1-3/8" /4 1-3/8" /8 1-3/8" Part # --C Length Female Pipe of Thread Stem /4 1-3/8" WITH CLICK Part # --C Female Pipe Thread SPECILTY VLVES RSS FITTINGS Length of Stem /8 1-3/8" /4 1-3/8" Openings: Handle Pointer over...valve Open -C Handle Pointer over C...Valve Open -C Part # FOUR-WY VLVES V407P LESS CLICK --C-D Female Pipe Thread Length of Stem /4 1-3/8" M-114-MID WITH CLICK (360 0 ) Part # --C-D Length Female Pipe of Thread Stem /4 1-3/8" /8 1-3/8" WITH 2-3/8" LONG STEM M-115-MID Part # --C-D Length Female Pipe of Thread Stem /4 2-3/8" Direction of Flow on four way valves pointer at: a), D open b) C, D open c), D open bracket open Openings: Handle Pointer over...valve Open -D Handle Pointer over C...Valve Open C-D Handle Pointer over...valve Open -D Handle Pointer over racket...valve OFF RSS Fax: sales@global-hose.com 159

160 SPECILTY VLVES SIX PORT VLVES RSS FITTINGS RSS Designed primarily for diesel engine applications where a fuel return or spill back is required. Mounting MOUNTING Pads PDS 5/16" 13/16" 4-27/32" For For 5/16" Stem Length Lgth. 5/11/32" 5-11/32" For For 13/16" 13/16" Stem Stem Length Lgth Maximum Handle Travel 180 Mounting Pads for olt Mounting Openings With Handle Lever over 1: (ll Ports Closed) With Handle Lever over 2: (Open: 2-3 and 5-6, Closed: 1 and 4) With Handle Lever over 3: (Open: 1-3 and 4-6, Closed: 2 and 5) Part # Ind. # Female Pipe Thread of Stem Length Type SK /2 x 3/8 13/ More sizes available...just ask! Phone:

161 RSS FITTINGS RSS TRUCK VLVES HOSE TO MLE PIPE Part # Size /8 x 3/ /8 x 3/ HOSE TO MLE PIPE 404V 404V Part # Size /8 x 1/ /4 x 3/ /4 x 1/ MLE PIPE TO FLRE SOLID OTTOM VLVES Designed for instantaneous on-off operation rotation standard. 30 PSI Packed with grease. 1035D M-70-SV O-RING SELED MIP X FIP 412V Part # Size /2 x 5/ Part # Size / / / SPECILTY VLVES SOLID OTTOM FUEL VLVES pproved for use on Motorcraft fuel lines. Pointer lever turn stop mechanism to assure positive location of the on and off positions. Corrosion proofed internal construction assures maximum salt atmosphere protection. Port hole is 1/4 (.250) diameter. UL listed for use in fuel oils no. 1 & no. 2, LP gas and utility gas PIPE MLE X FEMLE Part # Size M 1/8 x 1/ M 1/4 x 1/ M 3/8 x 3/ RSS FEMLE TO MLE PIPE Part # Size /8 x 3/ /8 x 1/ /2 x 1/ FLRE TO MLE PIPE 405V 409V Part # Size /2 x 1/ /8 x 1/ #M-72-SV FIP x FIP #M-75-SV MIP x FLRE 8875 Part # Size / Part # Size /4 x 3/ PIPE MLE x MLE Part # Size M 1/4 x 1/ PIPE FEMLE X FEMLE Part # Size M 1/4 x 1/ MLE PIPE X FLRE 8948 Part # Size M 1/4 x 3/ M 3/8 x 3/ Fax: sales@global-hose.com 161

162 RSS MINITURE LL VLVES RSS DOMESTIC MINITURE LL VLVES Working Pressure up to 1000 P.S.I.G. STM -16 Corrosion Resistant rass ody. Non-djusting Viton O-Ring Stem Seal Design Never Needs Tightening. Highly Inert Teflon Seats. Long Life Nickel Plated rass all. low-out Proof Stem for Safety. Temperature: -40 F to 300 F 1/4 Turn Instantaneous On-Off Operation. Quarter Turn Handle Design. Water, Oil, and ir Pressure Systems. Ideal for tight, confined areas, or when routing aesthetics are desired. pplications include instrumentation, gas sampling systems, high pressure gauges, test stands, hydraulic and pneumatic service lines on capital equipment. MLE X FEMLE Part # Size /8 x 1/ /4 x 1/ FEMLE X FEMLE Part # Size /8 x 1/ /8 x 1/ /4 x 1/ /4 x 1/ /8 x 3/ /2 x 1/ /4 x 3/ U.L. TWO WY VLVES una-n Seal, Teflon Seat Plated metal handle, plated brass ball. 250 PSI Working Pressure RSS FITTINGS MINI LL VLVES See p. 166 for specifications FEMLE X FEMLE Part # Size I 1/ I 1/ I 3/ I 1/ MLE X FEMLE Part # Size I 5 1/ I 1/ I 5 3/ I 3 1/ ECONOMY MINI LL VLVES Max Working Pressure: Maximum Temperatures: 1/4 Turn Handle 450psi 356 F at 142 psi 212 F at 355 psi MLE X MLE Part # Size /8 x 1/ /4 x 1/ U.L. TWO WY VLVES FNPT X FNPT Part # Size /4 x 1/ FEMLE X FEMLE Part # Size / / MLE PIPE X HOSE R Part # Size /8 x 1/ /4 x 1/ /4 x 3/ U.L. TWO WY VLVES MNPT X FNPT Part # Size /4 x 1/ MLE X FEMLE Part # Size / / See more mini valves on page Phone:

163 RSS FITTINGS CHECK VLVES/ MRINE FITTINGS RSS CHECK VLVES MX PSI Cracking Pressure 1/3-3 PSI Opening diameter max operating temp. SS ball and spring MNPT X MNPT Part # Size Opening Dia /4 x 1/ MX PSI Flo direction -> Opening diameter max operating temp. SS ball and spring MNPT X FNPT Part # Size Opening Dia /4 x 1/ MX PSI O-Ring poppet seal ubble tight operation 180 F max operating temp. FNPT X FNPT Part # Size Opening Dia /4 x 1/ /8 x 3/ /2 x 1/ PNEUMTIC CHECK VLVES Max Operating Pressure: Working Pressure: Cracking Pressure: Maximum Temperatures: Materials ody Chrome plated rass Spring Steel O-Ring NR Rubber 220 psi psi 2.8 psi 140 F HIGH PRESSURE CHECK VLVES Operates in any position, and is available Calibrated to support 30" column of gasoline. in mixed or matched end combinations. Standard cracking pressure 1 p.s.i (optional 3 or 7 p.s.i. available) with a maximum operating pressure of 3000 p.s.i. and a maximum operating temperature of 180 F using una-n seals. una-n seals standard, other seals available. NTI-SIPHON VLVES NPT X NPT Guided 316 stainless steel ball + spring. Part # Size Fixed ringed seat prevents extrusion of /4 x 1/ seal /8 x 3/ Opening diameter.28 rass pproximate CV 1.2 Flo direction <- Water 10 p.s.i. is 4.0 FEMLE X FEMLE Part # Size / / Flo direction -> FEMLE X MLE Part # Size / / Flo direction -> MLE X FEMLE Part # Size / / MRINE FITTINGS NTI-SIPHON VLVES R X NPT Part # Size /16 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ ULKHED FITTINGS Part # Size / / If you're not failing every now and again, it's a sign you're not doing anything very innovative. RSS NPT- Inlet NPSM - Outlet Part # Size Dimensions (In.) / / / MLE X MLE Part # Size / / Woody llen Fax: sales@global-hose.com 163

164 LL VLVES LL VLVE PRIVTE LEL PROGRM RSS FITTINGS RSS We will put your company name and logo on our ball valve handle for FREE. Simply place a minimum blanket order of 10 cases per size and We will stock them under a special part # for your access only. Please allow days for delivery on the first shipment only: Then have them delivered as you need them! *For Italian valves only. TEE HNDLES LOCKING HNDLES Part # Valve Size T 1/4" - 3/4" T 1" 3.54 Reversible Handles: ll regular ball valve handles are now reversible. You can take the handle off and reverse it, so it turns and opens over the opposite end of the valve in the opposite direction. Please let us know if this is a requirement when you order as some older stock may not have this feature. Open Part # Valve Size L 1/4" - 3/4" L 1" - 1 1/4" L 1 1/2" - 2" Closed Open Closed 164 Phone:

165 RSS VLVES FULL PORT LL VLVES FULL PORT 600WOG FORGED RSS LL VLVE 1/2" - 2" Sizes Gas pproved C 5 PSIG US U L FM UL842, UL258, UL125,FM ISO 9002 Manufacturer FETURES Suitable for full range of liquids and gases Minimal pressure drop due to large full size ports ottom loaded, pressure retaining stem Pressure rated for 1/4"-2" at 600psi (42 bars) and 2-1/2"-4" at 400 psi WOG (non-shock) and 150 WSP (10.34 bars) saturated steam. Virgin PTFE stem packing seal, thrust washer and seats Yellow vinyl insulator on heavy duty plated carbon steel handles Fast 1/4 turn open or close operation 1/4-2" 600 PSI non-shock cold water, gas, oil PSI saturated steam 2-1/2"- 4" 400 PSI non-shock cold water, gas, oil Low operating torque djustable stem packing gland Maximum operating temperature: F (150 0 C) Minimum operating temperature: F (-30 0 C) Each valve individually tested Forged rass - for more strength Threaded ends to NSI Hard chromium plated solid ball ottom entry, blow-out proof stem Deeper threads - for better connections C VLVES Made in China CH NPT G DN Minimum order is ox Quantity E Part# Size Dimension Inches Min. Order NPT DN C E CH ox Case /4" /8" /2" /4" " /4" /2" " /2" " " Minimum order quantity is ox Quantity 6 POS Components Materials N 1 ody Forged rass 1 2 End Connection Forged rass 1 3 all CP rass 1 4 all Seat P.T.F.E. 2 5 Stem rass 1 6 Gland rass 1 7 Nut Steel 1 8 Spring Inseat Steel 1 9 Stem Seal P.T.F.E Handle Steel Fax: sales@global-hose.com 165

166 VLVES FULL PORT LL VLVES 5 PSIG FULL PORT 600WOG FORGED RSS LL VLVE U L FM C US UL842, UL258, UL125,FM ISO 9002 Manufacturer FETURES CS G PSIG IMPO IGC b SOLID CHROME PLTED RSS LL Suitable for full range of liquids and gases Minimal pressure drop due to large full size ports ottom loaded, pressure retaining stem Pressure rated at 600psi (42 bars) WOG (non-shock) and 150 WSP (10.34 bars) saturated steam. Virgin TFE stem packing seal, thrust washer and seats. Yellow vinyl insulator on heavy duty plated carbon steel handles. Fast 1/4 turn open or close operation Low operating torque Flow can go both directions RSS VLVES 600 PSI non-shock cold water, gas, oil PSI saturated steam djustable stem packing gland Maximum operating temerature: F (120 0 C) at 600 PSI Minimum operating temperature: F (-40 0 C) Each valve individually tested Forged rass - for more strength Threaded ends to NSI Hard chromium plated solid ball ottom entry, blow-out proof stem Deeper threads - for better connections C Made in Italy CH G DN Female x Female Part# Size Dimension Inches G DN C E CH ox Case /4" /8" /2" /4" " /4" /2" " /2" " " E See additional handle options on page POS Components Materials N 1 ody Forged rass 1 2 End Connection Forged rass 1 3 all CP rass 1 4 all Stems P.T.F.E. 2 5 Stem ntif. Seat P.T.F.E. 1 6 Stem Seat P.T.F.E. 1 7 rass Ring rass 1 8 Stem rass 1 9 O-Ring NR Handle Steel 1 11 Nut Steel 1 12 Nut rass Phone:

167 NSF NSF 61 RSS VLVES NSF 61 FULL PORT 600WOG FORGED RSS LL VLVE ISO 9002 Manufacturer 1/4-2 Gas pproved FETURES 5 PSIG U L FM C US UL842, UL258, UL125,FM CS G PSIG NSF approved for drinking water applications 600 PSI non-shock cold water, gas, oil 150 PSI saturated steam Suitable for full range of liquids and gases. Virgin TFE stem packing seal, thrust washer and seats lue vinyl handle cover NSF 61 RSS LL VLVES Solid chrome plated brass ball djustable stem packing gland Threaded ends to NSI ottom entry, blow-out proof stem C VLVES CH Made in Italy DN G Female x Female E See Catalog Page 165 & 166 For regular ball valves! Size Dimension Inches NSF 61 Part# G DN C E CH ox Case /4" /8" /2" /4" " /4" /2" " NSF 61 pproved See additional handle options on page POS Components Materials N 1 ody Forged rass 1 2 End Connection Forged rass 1 3 all CP rass 1 4 all Stems P.T.F.E. 2 5 Stem ntif. Seat P.T.F.E. 1 6 Stem Seat P.T.F.E. 1 7 rass Ring rass 1 8 Stem rass 1 9 O-Ring NR Handle Steel 1 11 Nut Steel 1 12 Nut rass Fax: sales@global-hose.com 167

168 VLVES MLE x FEMLE LL VLVES Gas pproved U L FM UL842, UL258, UL125,FM CS G PSIG FULL PORT 600WOG FORGED RSS LL VLVE Solid chrome plated brass ball Suitable for full range of liquids and gases. Minimal pressure drop due to large full size ports. ottom loaded, pressure retaining stem. Pressure rated at 600psi (42 bars) WOG ( non-shock) and 150psi (10.34 bars) saturated steam. Virgin TFE stem packing seal, thrust washer and seats. Yellow vinyl insulator on heavy duty plated carbon steel handles. Fast 1/4 turn open or close operation. Flow both directions. Low operating torque. djustable stem packing gland. RSS VLVES Maximum operating temperature: F (120 0 C) Minimum operating temperature: F (-40 0 C) Each valve individually tested. Forged rass - for more strength. Threaded ends to NSI Hard chromium plated solid ball ottom entry, blow-out proof stem. POS Components Materials 1 ody C End Cap CS all Seat PTFE 4 all CS Stem CS Stem Reducing PTFE 7 Reducing Nut CS Lever Handle Stem Nut 570 Gr. MDE IN CHIN Part# Size NPT C D E ox Case /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ /2 1-1/ Phone:

169 RSS VLVES MLE X FEMLE LL VLVES FULL PORT 600WOG FORGED RSS LL VLVE Gas pproved ISO 9002 Manufacturer 5 PSIG U L FM FETURES C US UL842, UL258, UL125,FM CS G PSIG Made in Italy Solid chrome plated brass ball Suitable for full range of liquids and gases. Minimal pressure drop due to large full size ports. ottom loaded, pressure retaining stem. Pressure rated at 600psi (42 bars) WOG ( non-shock) and 150psi (10.34 bars) saturated steam. Virgin TFE stem packing seal, thrust washer and seats. Yellow vinyl insulator on heavy duty plated carbon steel handles. Fast 1/4 turn open or close operation. Low operating torque. djustable stem packing gland. Maximum operating temperature: F (120 0 C) at 600 p.s.i Minimum operating temperature: F (-40 0 C) KV: Pressure drop m^3/h. Each valve individually tested. Forged rass - for more strength. Threaded ends to NSI Hard chromium plated solid ball ottom entry, blow-out proof stem. Deeper threads - for better connections. C VLVES CH1 CH 2 Made in Italy G DN MIP x FIP E E1 Part# Size DN C E E1 CH1 CH2 ox Case / / / / / / POS Components Materials N 1 ody CW617N Forged rass 1 2 End Connection CW617N Forged rass 1 3 all CW617N CP rass 1 4 all Stems P.T.F.E. 2 5 Stem ntif. Seat P.T.F.E. 1 6 Stem Seat P.T.F.E. 1 7 rass Ring CW617N rass 1 8 Stem CW617N rass 1 9 O-Ring NR Handle UNI EN Steel 1 11 Nut UN 5771 Steel 1 12 Nut CW617N rass Fax: sales@global-hose.com 169

170 SOLDER ENDS LL VLVES 600 PSI non-shock cold water, gas, oil 150 PSI saturated steam (WSP) ISO 9002 Manufacturer FETURES RSS VLVES FULL PORT 600WOG FORGED RSS LL VLVE U L FM UL842, UL258, UL125,FM Minimal pressure drop due to large full size ports. ottom loaded, pressure retaining stem. Pressure rated at 600psi (42 bars) WOG (non-shock) and 150psi (10.34 bars) saturated steam. Virgin TFE stem packing seal, thrust washer and seats. Vinyl insulator on heavy duty plated carbon steel handles. Fast 1/4 turn open or close operation Low operating torque djustable stem packing gland. Maximum operating temperature: F (120 0 C) at 600 psi. Minimum operating temperature: F (-40 0 C) Each valve individually tested. Forged rass - for more strength. Tube ends to NSI Hard chromium plated solid ball. ottom entry, blow-out proof stem. Use with STM 88 copper water tubing. C CH DN SWT x SWT E Part# Size Dimension Inches SWT DN C E CH ox Case / / / / POS Components Materials N 1 ody Forged rass 1 2 End Connection Forged rass 1 3 all CP rass 1 4 all Seats P.T.F.E. 2 5 Stem rass 1 6 O-Ring NR rass Ring rass 1 8 Nut UNI 5771 Steel 1 9 Stem Seat P.T.F.E 1 10 Handle Steel 1 11 Stem Seat P.T.F.E 1 12 Nut rass Phone:

171 RSS VLVES 1/2" Gas pproved ISO 9002 Manufacturer FETURES 5 PSIG C US CS G PSIG 400 PSI non-shock cold water, gas, oil 150 PSI saturated steam (WSP) Solid chrome plated brass ball Threaded ends to NSI Each valve individually tested Hard chromium plated solid ball ottom entry, blow-out proof stem Double stem packing, Teflon seats. FORGED RSS LL VLVE - STNDRD PORT U L FM UL842, UL258, UL125,FM STNDRD PORT LL VLVES C Yellow Handle CH G DN FIP x FIP E FORGED RSS LL VLVE IPS SCREWED ENDS Part# Size Dimension Inches G DN C E CH ox Case / / / / See additional handle options on page POS Components Materials N 1 ody Forged rass 1 2 End Connection Forged rass 1 3 all CP rass 1 4 all Stems P.T.F.E. 2 5 Stem ntif. Seat P.T.F.E. 1 6 Stem Seat P.T.F.E. 1 7 rass Ring rass 1 8 Stem rass 1 9 O-Ring NR Handle Steel 1 11 Nut Steel 1 12 Nut rass Fax: sales@global-hose.com 171

172 G VLVES D GS LL VLVES 5 PSIG C US CS G PSIG U L ISO 9002 Manufacturer FETURES Manual Valve LISTED Threaded NPT UL 842, UL 258, UL 125 Solid chrome plated brass ball ottom entry low out proof design. Double viton o-rings stem seals Teflon seats for durability. Forged construction for greater strength. Larger ports for increased flow capacity. For use with natural, manufactured, mixed liquified. petroleum and LP gas-air mixtures. G CH C GS LL VLVES Part# Made in Italy Deeper thread connections. Smooth quarter-turn. Manufactured to NSI Z21.15, C.G M81, 9.2-M88, 1/2 psig. 372 also to.g.. 3-8, C.G.. CR91-002, 2 psig. Red Reversible handle. May be used with water 400 WOG. GS LL VLVES FEMLE x FEMLE RSS VLVES Size Dimension Inches G DN C E CH PN in psi ox Case /2" /4" E C PPLINCE CONNECTOR VLVES FEMLE X FLRE G CH2 D Part# Size Dimension Inches G DN C CH1 CH2 ox Case /2 x 3/ /2 x 1/ /4 x 5/ CH1 C FLRE x FLRE CH2 Part# Size Dimension Inches G DN C CH1 CH2 PN in psi ox Case /8 x 3/ /2 x 1/ CH Components Materials 1 ody Forged rass 2 End Connection Forged rass 3 all Forged rass 4 all Seats P.T.F.E. 5 Stem rass 6 O-Ring NR 7 utterfly Steel 8 Screw UNI 5771 Steel Phone:

173 C D RSS VLVES CHROME PLTED RSS MINI LL VLUE Made in Italy ISO 9002 Manufacturer Solid chrome plated brass ball FETURES Max working pressure 235 psi will handle 300psi@75 F lowout-proof brass stem. Longer body style for longer, NPT taper NSI threads. deeper thread connections 32 F to +176 F temperature. One piece drawn sand blasted chrome plated body. 1/4 Turn Nylon handle with mechanical stop. Each valve is seal tested for maximum safety. NSF pproved valves available upon request! Double seal system allows valve to be operated in both directions making installation easier. Female x Female G DN E C CH CHROME PLTED RSS MINI LL VLVES Part# Size Dimension Inches G DN C E CH OX CSE I 1/8" I 1/4" I 3/8" I 1/2" VLVES Made in Italy C Male x Female G DN E CH Part# Size Dimension Inches G DN C E CH OX CSE I 1/8" I 1/4" I 3/8" I 1/2" Max Working Pressure: Maximum Temperatures: 1/4 Turn Handle 4 7 POS Components Materials N 1 ody CW517N Forged rass 1 2 all Seats P.T.F.E 2 3 all CW517N CP rass 1 4 Ring Unit CW614N rass 1 5 Stem CW614N rass 1 6 Screw UNI 5771 Steel 1 7 Handle Nylon 1 8 O-Ring NR psi 356 F at 142 psi 212 F at 355 psi ECONOMY MINI LL VLVES FEMLE X FEMLE Part # Size Dimensions (In) C D / / MLE X FEMLE Part # Size Dimensions (In) C D / / Send us your volume quotes! Pos Components Materials N 1 ody CP Forged rass 1 2 all Seats P.T.F.E. 2 3 all CP rass 1 4 Ring Unit rass 1 5 Stern rass 1 6 O-Ring NR Handle S 1 8 Screw Steel 1 Fax: sales@global-hose.com 173

174 VLVES MINI LL VLVES RSS VLVES Forged brass Mini-all Valves operational handle, blow out proof stem. Stem with double O Rings - *90 Operational handle. 200 WOG 125SWSP FEMLE x FEMLE * NO Part Name Material QTY 1 Nut Steel 1 2 Handle Steel 1 3 Cover PVC 1 4 O-Ring NR 2 5 Stem rass 1 6 ody rass 1 7 Seat Teflon 2 8 all Disc rass 1 9 End Plug rass 1 Part # Size /4X1/ /4X1/ * 90 Operational handle. MLE x FEMLE Part # Size /8X1/ /8X1/ /4X1/ /4X3/ FEMLE x HOSE R Part # Size /8X1/ /4X5/ /4X1/ NP MINI LL VLVES With and without internal check valve. * Nickel Plated NEW R x MLE PIPE w/ check Part # Size /4 x 1/ /8 x 1/ R x MLE PIPE without check Part # Size /8 x 1/ NEW MLE x MLE Part # Size /8X1/ /4X1/ /2X1/ FLRE x MIP w/ check valve Part # Size /4 x 1/ FLRE x MIP without check valve Part # Size /4 x 1/ NEW HOSE R x MLE Part # Size * 1/4X1/ /8X1/ * 90 Operational handle. R x R no check Part # Size / / NEW 174 HOSE R x HOSE R Part # Size * /4X1/ * /8X3/ * 90 Operational handle. Phone: FLRE x MIP with check Part # Size WC 1/4 x 1/ Private label handle available on volume purchases.

175 HNDLE RSS VLVES 3 WY LL VLES SIDE OUTLET 3 WY LL VLVE L Forged rass 200 WOG 125 WSP Temp Rating F Side outlet H 4 D VLVES ROTTION 0 45 HNDLE INLET 90 HNDLE INLET Full Port low-out proof stem double o-ring stem packing PTFE Seal Nomenclature & Materials NO Part Name Material Qty 1 Nut Steel 1 2 Spring Washer Steel 1 3 Handle Steel 1 4 Cover PVC 1 5 O-Ring NR 2 6 Stem rass 1 7 ody Forged rass 1 8 Seat Teflon 2 9 all Disc rass 1 10 End Plug rass 1 11 O-Ring NR 3 12 Socket rass 3 I Part# Size I H D L ox Case /4" /8" /2" /4" Forged rass ottom Port is inlet 400 psi Side Ports are inlet 100 psi OTTOM OUTLET 3 WY LL VLVE Double O-Ring Seal low out proof stem Made in US ottom outlet Part# Size D G H L Cv /4" /8" /2" Fax: sales@global-hose.com 175

176 MISC. VLVES RSS VLVES STINLESS TRIM LL VLVES Full Port 600 WOG Forged rass all Valves Nickel plated body. Stainless steel tee handle and nut. NGLE SILLCOCKS 3/4 Hose Thread Outlet Notched flange for convenient installation. Heavy brass construction. Cast Iron handle. 5 PSIG VLVES C US CS G PSIG T - HNDLE Part # Size ST 3/ FEMLE IPS Part # Size ox / VLVES HOSE IS 3/4 Hose Thread Outlet LEVER HNDLE Part # Size STL 3/ STL More options available... just ask! EXHUST VLVES UTOMTIC EXHUST DRIN & LL LTCH VLVES LOCK HNDLE Full port hot forged brass ball valve, blow-out proof stem, downstream automatic vent with lockable handle in compliance with OSH requirements. Maximum working pressure: 200 PSI (CWP). Temperature rating: -4 F through +350 F. OPEN 200 PSI IPS Part # Size ox /2 (1/2"C) / DRUM & RREL FUCET VLVE Die cast body w/ nylon seat and steel spring. For use with all petroleum products except trichlorethylene. Lockable handle. G261N Not suitable for potable water. Valve - open position. Drain vent shut off. CLOSED Part# Size /4" /8" /2" /4" " SELF-CLOSING DRUM & RREL FUCET Part # Size /4" Valve - closed and draining occurs. Upstream seat prevents air flow. Downstream system is vented to atmosphere. Phone:

177 RSS VLVES FULL PORT RSS GTE VLVE GTE VLES 200 WOG (cold water, oil, gas). 125 WSP (Saturated Steam). Full-port design for a better water flow. Screw-in onnet - Non-Rising Stem - Solid Wedge NPT Threaded ends to NSI Cast iron handle. Forged rass ody for 1/2" - 1" Cast brass body for 1-1/4" - 4". Each valve individually air tested under water. D1 VLVES H d T NO Description Material 1 ody C Disk C Seat PTFE 4 Cap C Packing C Stem C Rubber Seat NR 8 Packing Nut C Handle HT Nameplate L 11 Stem Nut 570 Gr. L (THRED) 2 S1 RSS GTE VLVES IPS Part# Size L H D1 d T S1 ox Case / /4-18 NPT / /8-18 NPT / /2-14 NPT / /4-14 NPT NPT / / NPT / / NPT NPT / /2-8 NPT NPT NPT Fax: sales@global-hose.com 177

178 Y STRINERS RSS VLVES CLSS 150 RONZE Y-PTTERN STRINER VLVES Casting bronze body, size 1/4"-3". Pressure rating: 150 WOG (water, oil, gas)/pn WSP (Saturated Stem) NPT Threaded ends to NSI Protects regulators, pumps, meters and other controls from damage due to sediment scale, metal chips or other foreign materials. Screwed cap is threaded & gasketed. Tapped drain plug opening in cap. 304 stainless steel screen #20 mesh. Self cleaning. Self cleaning can be accomplished by opening the valve or plug connected to the blow-off outlet. Part# Size L C ox Case /4" / /8" / /2" / /4" / " / /4" / /2" / " / /2" / " / NO Name Material Qty 1 ody ronze 584 C Cap ronze 584 C Screen SS Gasket Non-sbestos 1 5 Plug rass 16 C Lead Free fittings available on pgs Phone:

179 RSS VLVES SWING CHECK VLES RSS SWING CHECK VLVES Working pressure non-shock: 200 psi W.O.G. (cold water, oil, gas) 125 psi WSP (saturated steam) Swing type disc. Screwed Cap. Hard Seat Straight Pattern. Used to prevent reverse flow in commercial and industrial applications. Threaded ends to NSI Integral seat. VLVES H DN L L NO Description Material 1 ody C Disc C Cap C rass ar C Screw C Gasket PTFE CST RSS SWING CHECK VLVES IPS SCREWED ENDS Part # Size L H L1 DN ox Case / / / / / Fax: sales@global-hose.com 179

180 CHECK VLVES RSS VLVES RSS CHECK VLVES S.S. SPRING LODED RONZE POPPET For positive sealing & self-cleaning. Insures against leakage. VLVES Inline Lift Type - Resilient Discs - Spring ctuated - Threaded. Presure rating: 200 WOG (water, oil, gas) 125 WSP (Saturated Steam) Spring in stainless steel ISI 304. Resilient washer hold/ disc in brass. Forged rass ody for 1/2"-2" Corrosion resistant material. Can be used vertically or horizontally. Opens & Closes with flow of media. No cracking pressure. Temp Range -10 C C -4 F F VLVES C rass Check Valve (Inches) Part# Size Enters Pipe Size NPT C ox Case /4" - 1/4" /8" - 3/8" /2" 1-1/4" 1/2" /4" 1-1/4" 3/4" " 2" 1" /4" 2-1/2" 1-1/4" /2" 3" 1-1/2" " 3-1/2" 2" See more Check Valves on page 163 NO Part Material 1 Cap C Gasket PTFE 3 Spring Stainless Steel 4 Positioning Seat S 5 Screw S 6 ody C Phone:

181 STEEL VLVES CRON STEEL VLES STNDRD PORT CRON STEEL LL VLVE For chemical and industrial applications. low-out proof stem design. 100% air tested under water, at 100 psi, open and closed positions SPECIFICTIONS Working Pressure: 1/4 ~ psi WOG, 1-1/4 ~ psi WOG, Temperature Range: to F End types: Threaded 1 piece ball valve reducing bore Reinforced PTFE seat 9 FE L d VLVES H HNDLE: 1/4" ~3/8" PSI STNDRD PORT Part # Size d H E L ox Case / / / / / / Pressure (PSI) Pressure Temperature Ratings F (-29) (-18) (38) (93) (149) (204) (260 C) Temperature F ( C) Item Parts Material 1 ody STM 108 CL Unscrewed Seat Retainer or ISI 1021 C.S. 3 all SS304 4 Stem SS316 5 all Seat RPTFE 6 Cap Seal PTFE 7 Packing PTFE 8 Handle SS304 9 Handle Sleeve Vinyl Grip 10 Thrust Washer PTFE 11 Gland SS Washer SS Handle Nut SS Stem Nut SS304 Fax: sales@global-hose.com 181

182 STINLESS LL VLVES Yellow locking handle now standard ONE PIECE STNDRD PORT LL VLVE 316 Stainless Steel 1000 PSI STINLESS STEEL VLVES VLVES VLVES Valves will accept a pad-lock on the handle. Larger sizes available on special order basis dimensions (inches) Part# Size D L H W /4" /8" /2" /4" " /4" /2" " Dimensions may change. Private Label handles available. See Page 164 for details Item Parts Material 1 Plastic Cover Plastic 2 Handle ISI 304 SS 3 Thrust Washer PTFE 4 Packing Ring ISI 304 SS 5 Stem Packing PTFE 6 Seat PTFE 7 Seat ISI 316 SS 8 Stem Nut ISI 304 SS 9 all 316SS STM-351 CF8M 10 Cap 316SS STM-351 CF8M 11 ody 316SS STM-351 CF8M SS = Stainless Steel 182 Phone:

183 STINLESS STEEL VLVES STINLESS STINLESS STEEL STEEL LL VLVES 1000 PSI 2 PC FULL PORT STINLESS STEEL VLVE Materials: CFM8M (SS316), DIN Features: Investment Casting body Working pressure 1000 psi for W.O.G. djustable stem packing Pure teflon seals and seats Temperature range: -60 to 450 F low-out proof stem and safe pressure-reducing hole 100% leakage tested at 100 psi air under water Hydrostatic test pressure: 1500 psi Locking handle w/ yellow generic sleeve VLVES Lock D S H Pressure psi Pressure-temperature ratings (-29) (-10) (38) (93) (149) (204) (260 C) temperature f ( C) L Valves will accept a pad-lock on the handle. no. name material qty 1 CP 316 SS 1 2 LL SET PTFE 2 3 JOINT GSKET PTFE 1 4 ODY 316 SS 1 5 LL 316 SS 1 6 THRUST WSHER PTFE 1 7 STEM PCKING PTFE 1 8 GLND NUT 304 SS 1 9 STEM 316 SS 1 10 STEM NUT 304 SS 1 11 SPRING WSHER 304 SS 1 12 HNDLE 304 SS 1 13 PLSTIC SLEEVE PVC 1 Part # Size D L H S pprox /4" /8" /2" /4" " Do not argue with an idiot. He will drag you down to his level and beat you with experience. Fax: sales@global-hose.com 183

184 STINLESS LL VLVES Yellow locking handle now standard! TWO PIECE FULL PORT LL VLVE 316 Stainless Steel 1000 PSI STINLESS STEEL VLVES VLVES Valves will accept a pad-lock on the handle. dimensions (inches) Part# Size D L H W /4" /8" /2" /4" " /4" /2" " Larger sizes available on special order basis Dimensions may change without notice. Private Label handles available. See Page 164 for details Item Parts Material 1 ody 316SS STM-351 CF8M 2 ody Cap 316SS STM-351 CF8M 3 all 316SS STM-351 CF8M 4 Seat Reinforced PTFE 5 Stem ISI 316 SS 6 Seal Reinforced PTFE 7 Thrust Washer Reinforced PTFE 8 Packing Reinforced PTFE 9 Gland Nut ISI 304SS 10/11 Nut & Washer ISI 304SS 12 Handle ISI 304SS 13 Plastic Cover Plastic SS = Stainless Steel 184 Phone:

185 SS STINLESS CHECK VLVES STEEL VLVES STINLESS STEEL Check Valve STINLESS STINLESS STEEL STEEL LL VLVES No Lead. Water wells need a check valve installed above the pumps between lengths of drop pipes. Opens & Closes with flow of media. No cracking pressure. Working pressure unavailable. 7 VLVES C Dimensions (Inches) Part# Size NPT C ox Case /2" 1/2" /4" 3/4" " 1" More sizes available on a special order basis. PRESSURE (PSI) FLOW RTE-GLLONS PER MINUTE FLOW RTE GLLONS PER MINUTE HEIGHT (FEET) NO Part Material 1 ody S.S Stopper S.S O-Ring Viton 4 Washer PE 5 Spring S.S Cap S.S Nut S.S 304 See more Check Valves on page 163 Fax: sales@global-hose.com 185

186 VLVES PVC VLVES WHITE PVC LL VLVES Quarter turn Solvent ends comply with STM D2466 Designed for use in residential, commercial & industrial system as well as waste water, chemical, agricultural applications, marine, food processing, swimming pools. Corrosion resistant EPDM seal EPDM O-ring Fits both Sch. 40 & 80 pipe NSF approved Rated for 150 PSI at 73 F Threaded ends comply with NSI MOLDED IN PLCE WHITE PIPE THREDS Part# Size ox Case /2" /4" " /4" /2" " " " COMPCT LL VLVES FETURES Sizes range from 1/2" to 4" Excellent flow characteristics Leak-tight shut-off PVC VLVES Test pressure: F Working Pressure: F SLIP X SLIP LL VLVE Part # Size /2" /4" " /4" /2" " /2" " " WHITE SOCKET SLIP X SLIP Part # Size ox Case /2" /4" " /4" /2" " FIP X FIP THREDED LL VLVE Part # Size /2" /4" " /4" /2" " /2" " " Pipe threads to NSI Hose threads to NSI The FLO-RITE faucet has been engineered to meet the demand for greater chemical resistance, using linear polyethylene for the stem. FLO-RITE DRUM FUCET Part # Size /4" PLSTIC DRUM FUCETS FLO-KING DRUM FUCET Part # Size Phone:

187 RSS NIPPLES We hereby certify that to the best of our knowledge and belief the CD 230 alloy Red rass Pipe from which our nipples are produced meet the requirements of STM Specifications and is free of mercury contamination. The chemical analysis is 85% copper, 15% Zinc and conforms to federal Specifications WWN-351. Our brass nipples meet STM and MS51846 for standard brass nipples, and MS51872 for extra heavy brass nipples. Threads: Nipples are threaded with merican Standard taper pipe threads (NPT) in accordance with screw-thread standard for Federal Services Handbook H-28. rass nipples are in compliance with California's Health & Safety code section (1953) and Vermont ct 193. This product is certified by NSF to NSF/NSI 61 for use in drinking water supplies of ph 6.5 and above. STNDRD RED RSS 85% Pipe With Threaded Ends Specifications: Pipe Size Dimension in Inches in Wall O.D. I.D. Inches Thickness 1/8" /4" /8" /2" /4" " /4" /2" " /2" " /2" " /2" " " llowable Pressure POUNDS PER SQURE INCH Standard Size F 1/8" /4" /8" /2" /4" " /4" /2" " /2" " /2" " " " RSS NIPPLES NIPPLES & FITTINGS EXTR HEVY RED RSS 85% Pipe With Threaded Ends Specifications: Pipe Size Dimension in Inches in Wall O.D. I.D. Inches Thickness 1/ / / / / / / / / NIPPLE WEIGHT CHRT Diameter Length of Close Close 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 4-1/2" 5" 5-1/2" 6" 1/8" 3/4" /4" 7/8" /8" 1" /2" 1-1/8" /4" 1-3/8" " 1-1/2" /4" 1-5/8" /2" 1-3/4" " 2" /2" 2-1/2" " 2-5/8" " 2-7/8" For Extra Heavy rass multiply above weight by 1.37 For thread charts please see page 428 Fax: llowable Pressure POUNDS PER SQURE INCH Standard Size F 1/ / / / / / / / / pproximate weight per 100 pieces. Standard rass Nipples. sales@global-hose.com 187

188 RSS NIPPLES 1/8" Diameter RSS NIPPLES 3/8" Diameter NIPPLES & FITTINGS Part # Size Close ( 3/4" ) x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Part # Size Close ( 1" ) x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" /4" Diameter 1/2" Diameter Part # Size Close ( 7/8" ) x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Part # Size Close ( 1-1/8" ) x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Extra Heavy Schedule 80 Red rass Nipples page 191 Chrome Plated rass Nipples vailable upon request 188 Phone:

189 RSS NIPPLES 3/4" Diameter 1-1/4" Diameter RSS NIPPLES Part # Length Close (1-3/8" ) x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Part # Length Close ( 1-5/8" ) x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" NIPPLES & FITTINGS 1" Diameter 1-1/2" Diameter Part # Length Close ( 1-1/2" ) x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Part # Length Close ( 1-3/4" ) x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Extra Heavy Schedule 80 Red rass Nipples page 191 Chrome Plated rass Nipples vailable upon request Fax: sales@global-hose.com 189

190 RSS NIPPLES 2" Diameter RSS NIPPLES 3" Diameter NIPPLES & FITTINGS Part # Length Close ( 2" ) x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Part # Length Close ( 2-5/8" ) x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" " Diameter 2-1/2" Diameter Part # Length Close ( 2-1/2" ) x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Part # Length Close ( 2-7/8" ) x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 8" x 12" Extra Heavy Schedule 80 Red rass Nipples page 192 Chrome Plated rass Nipples vailable upon request etter to remain silent and be thought a fool, than to speak up and remove all doubt. 190 Phone:

191 RSS NIPPLES 1/8" Diameter Extra Heavy Red RSS NIPPLES 1/2" Diameter Part # Length Close (3/4 ) / / / / / /4" Diameter Part # Length Close (1-1/8 ) / / / / / /4" Diameter NIPPLES & FITTINGS Part # Length Close (7/8 ) / / / / / /8" Diameter Part # Length Close (1-3/8 ) / / / / " Diameter Part # Length Close (1 ) / / / / / Part # Length Close (1-1/2 ) / / / / Fax: sales@global-hose.com 191

192 Extra Heavy Red RSS NIPPLES RSS NIPPLES 1-1/4" Diameter 2-1/2" Diameter NIPPLES & FITTINGS Part # Length Close (1-5/8 ) / / / / /2" Diameter Part # Length Close (2-1/2 ) / / / " Diameter Part # Length Close (1-3/4 ) / / / / " Diameter Part # Length Close (2 ) / / / / Part # Length Close (2-5/8 ) / / / " Diameter Part # Length Close (2-3/4 ) / / / How is it one careless match can start a forest fire, but it takes a whole box to start a campfire? 192 Phone:

193 RONZE FITTINGS RONZE FITTINGS Class 125 (150) For steam, water, gas, oil and air service Standard specifications Materials - STM (85,5,5,5) C83600 Dimensions - NSI Threads - NSI 2.1 or 21 and Fed. WW-P-460 UL/ FM pproved 1S0 9001:2000 ronze threaded fittings are manufactured from smooth-cored castings, designed to provide full flow with minimum restriction. ll threads are accurately machined and gauged to ensure a perfect fit with the pipe. ll fittings are individually tested under water to ensure quality. ronze provides a tighter seal and is easier to install then other metals. Can be used for water, plumbing, heating, pneumatic and marine applications.ble to resist the harmful effects of corrosion when coming into contact with salt water or fresh water polluted with mineral acids or peaty soils. X ELOWS Part # Size pprox / / / / / / / / NIPPLES & FITTINGS 90 REDUCING ELOWS X101 Part # Size pprox /4 x 1/ /2 x 3/ /4 x 1/ x 3/ /4 x /2 x x "x1-1/2" STREET ELLS X103 Part # Size pprox / / / / / / / / Fax: sales@global-hose.com 193

194 RONZE FITTINGS RONZE FITTINGS NIPPLES & FITTINGS X ELOWS 45 STREET ELOWS NEW NEW Part # Size pprox / / / / / / / /2" " X103 Part # Size pprox / / / / / / / X106 TEES Part # Size pprox / / / / / / / / If 4 out of 5 people SUFFER from diarrhea... does that mean that one enjoys it? 194 Phone:

195 RONZE FITTINGS RONZE FITTINGS REDUCING TEES X106 ULLHED TEES 3 REDUCING ON THE RNCH Part # Size pprox. (1 & 2) x /2 x 1/ /2" x 3/8" /4 x 1/ /4 x 3/ /4 x 1/ x 1/ x 3/ /4 x 1/ /4 x 3/ /4 x LRGER RNCH Part # Size pprox. 1x2x /2 x 1/2 x 3/ NIPPLES & FITTINGS 1 2 X106 * Many sizes available...just ask! 1 REDUCING TEES 3 C 2 REDUCING ON THE RUN Part # Size 1x2x3 C pprox /4 x 1/2 x 1/ x 3/4 x 3/ X106 * Many sizes available...just ask! CROSSES X110 Part # Size pprox / / / / / / computer once beat me at chess, but it was no match for me at kick boxing. Fax: sales@global-hose.com 195

196 NIPPLES & FITTINGS RONZE FITTINGS COUPLINGS X111 REDUCING COUPLINGS X112 NEW RONZE FITTINGS Part # Size pprox / / / / / / / /2" Part # Size pprox /4 x 1/ /8 x 1/ /8 x 1/ /2 x 1/ /2 x 1/ /2 x 3/ /4 x 1/ /4 x 3/ /4 x 1/ x 3/ x 1/ x 3/ /4 x 1/ /4 x 3/ /4 x /2 x 1/ /2 x 3/ /2 x /2 x 1-1/ x 1/ x 3/ x x 1-1/ x 1-1/ /2 x 1-1/ /2 x x x 2-1/ Why does someone believe you when you say there are four billion stars, but check when you say the paint is wet? 196 Phone:

197 RONZE FITTINGS RONZE FITTINGS CPS X116 Part # Size pprox / / / / / / / NIPPLES & FITTINGS X187 UNIONS Part # Size pprox / / / / / / / / clear conscience is usually the sign of a bad memory. Fax: sales@global-hose.com 197

198 RONZE FITTINGS RONZE FITTINGS HEX USHINGS NIPPLES & FITTINGS X114 NEW Part # Size pprox /4 x 1/ /8 x 1/ /8 x 1/ /2 x 1/ /2 x 1/ /2 x 3/ /4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ x 1/ x 3/ x 1/ x 3/ /4 x 1/ /4 x 3/ /4 x 1/ /4 x 3/ /4 x /2 x 1/ /2 x 3/ /2 x 1/ /2 x 3/ /2 x /2 x 1-1/ x 1/ x 3/ x x 1-1/ x 1-1/ /2 x /2 x 1-1/ /2 x x 1-1/ x x 2-1/ " x 3" Success is not the key to happiness. Happiness is the key to success. If you love what you are doing, you ll be a success. -lbert Schweitzer 198 Phone:

199 RONZE FITTINGS RONZE FITTINGS RONZE COUNTERSUNK PLUGS Part # Size Socket pprox. Size / / / / / CORED SQURE HED PLUGS C X117 Part # Size C pprox / / / / / / / / NIPPLES & FITTINGS SOLID SQURE HED PLUGS C X117 Part # Size C pprox / / / / / / / man walks into a bar with a slab of asphalt under his arm and says: beer please, and one for the road. Fax: sales@global-hose.com 199

200 RONZE FITTINGS RONZE FITTINGS HEX LOCKNUTS X119 Part # Size Thickness pprox / / / / / / / NIPPLES & FITTINGS HEX NIPPLES Part # Size pprox / / / / / / / REDUCING NIPPLES Part # Size pprox /4 x 1/ /2 x 3/ /4 x 1/ x 1/ x 3/ /4 x /2 x /2 x 1-1/ x 1-1/ Floor Flanges and Companion Flanges available upon request. 200 Phone:

201 STINLESS STEEL Schedule 40 Welded - NPT threaded both ends SCH 40 STINLESS STEEL NIPPLES Stainless steel pipe nipples are manufactured from stainless steel pipe that conforms to specification STM 312/ S312. ll stainless steel nipples conform to specification STM 733. Threads conform to the requirements of NSI Why Stainless Steel - Corrosion-resistant to hundreds of industrial and chemical solutions, high strength at high temperatures. Can be used with water, oil and gas. Is sanitary and does not contaminate product being transported, makes it an excellent choice for pharmaceutical, dairy, brewery, beverage and food industries. Max. Pressure: 150 PSI 150 F Temp. Range: -60 to 450 F 304 stainless steel offers great corrosion resistance at an economical price. Type 316 has a larger nickel content and offers even better corrosion resistance. 1/8 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (3/4") x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 10" 3/8 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (1") x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 8" x 10" NIPPLES & FITTINGS 1/2 Diameter 1/4 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (7/8") x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 8" x 10" x 12" Part # 304 S.S. Length Part # 316 S.S X Close (1") x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" " x 11" x 12" * Stainless Steel Nipples available in SCH80 seamless beginning on page 204 Fax: sales@global-hose.com 201

202 SCH 40 STINLESS STEEL NIPPLES STINLESS STEEL 3/4 Diameter 1-1/4 Diameter NIPPLES & FITTINGS Part # 304 S.S. Length Part # 316 S.S X Close (1-3/8") x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 10" x 12" Part # 304 S.S. Length Part # 316 S.S X Close (1-5/8") x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 8" x 12" 1 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (1-1/2") x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 10" * Stainless Steel Nipples available in SCH80 seamless beginning on page /2 Diameter Part # 304 S.S. Length Part # 316 S.S x 1-3/4" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 8" x 9" Other Stainless Steel Nipples vailable Schedule 40 & 80 seamless Two cannibals are eating a clown. One says to the other: Does this taste funny to you? 202 Phone:

203 STINLESS STEEL SCH 40 STINLESS STEEL NIPPLES 2 Diameter 4 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (2") x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" Part # 304 S.S. Length Part # 316 S.S X Close (2-7/8") x 5" x 6" * Stainless Steel Nipples available in SCH80 seamless beginning on page STINLESS STEEL TOE NIPPLES/ WELDING NIPPLES Toe nipples are only threaded on one end to allow for easy connections, unthreaded end allows for welding a permanent leak-resisteant bond. Roller cut NIPPLES & FITTINGS 2-1/2 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (2-1/2") x 12" x 5-1/2" Diameter Part # 304 S.S. Length Part # 316 S.S X Close (2-5/8") x 3" x 4" x 5" x 6" x 7" x 8" x 12" Part # Size T 1/4" x 1-1/2" T 1/4" x 2" T 3/8" x 1-1/2" T 3/8" x 2" T 1/2" x 1-1/2" T 1/2" x 2" T 3/4" x 1-1/2" T 3/4" x 2" T 1" x 2" T 1" x 2-1/2" T 1-1/4" x 2" T 1-1/4" x 2-1/2" T 1-1/2" x 2" T 1-1/2" x 2-1/2" T 2" x 2" T 2" x 2-1/2" Reamed & Chamfer or Saw Cut available upon request. Fax: sales@global-hose.com 203

204 SCH 80 STINLESS STEEL NIPPLES STINLESS STEEL NIPPLES & FITTINGS 1/8 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (3/4 ) X 1-1/ X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X /4 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (7/8 ) X 1-1/ X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X /8 Diameter Part # 304 S.S. Length Part # 316 S.S X CLOSE (1 ) X 1-1/ X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X /2 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (1-1/8) X 1-1/ X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X /4 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (1-3/8 ) X 1-1/ X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X Diameter Part # 304 S.S. Length Part # 316 S.S X Close (1-1/2 ) X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X Phone:

205 STINLESS STEEL SCH 80 STINLESS STEEL NIPPLES 1-1/4 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (1-5/8 ) X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X /2 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (2-1/2 ) X X 3-1/ X X 4-1/ X X 5-1/ X NIPPLES & FITTINGS 1-1/2 Diameter Part # 304 S.S. Length Part # 316 S.S X Close (1-3/4 ) X X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X Diameter Part # 304 S.S. Length Part # 316 S.S X Close (2-5/8 ) X X 3-1/ X X 4-1/ X X 5-1/ X Diameter Part # 304 S.S. Length Part # 316 S.S X Close (2 ) X 2-1/ X X 3-1/ X X 4-1/ X X 5-1/ X Diameter Part # 304 S.S. Length Part # 316 S.S X Close (2-7/8 ) X X 4-1/ X X 5-1/ X Fax: sales@global-hose.com 205

206 304 ND # STINLESS STEEL FITTINGS STINLESS STEEL Stainless Casting conform to STM 351 NPT Threads confrom to SME ELOWS Max pressure: 300 psi WOG; 150 psi saturated steam Meets MSS-SP-114 Class 150 pressure ratings. TEES NIPPLES & FITTINGS Part # Size Part # 304 S.S 316 S.S / / / / / / / / STREET ELLS Part # Size Part # 304 S.S 316 S.S / / / / / / / CROSSES Part # 304 S.S Size Part # 316 S.S / / / / / / / ELOWS Part # Size Part # 304 S.S 316 S.S. 1/ / / / / / / STINLESS STEEL OD MCHINED COUPLINGS 206 Part # Size Part # 304 S.S 316 S.S / / / / / / / Phone: Part # Size Part # 304 S.S 316 S.S / / / / / / / * 3000 L Forged Stainless Steel Fittings available

207 STINLESS STEEL COUPLINGS 304 ND # STINLESS STEEL FITTINGS CPS Part # Size Part # 304 S.S 316 S.S / / / / / REDUCING COUPLINGS Part # 304 S.S Size Part # 316 S.S / / / / / / / HEX CPS NIPPLES & FITTINGS Part # 304 S.S Size Part # 316 S.S /4 x 1/ /8 x 1/ /8 x 1/ /2 x 1/ /2 x 1/ /2 x 3/ /4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ x 3/ x 1/ x 3/ /4 x 3/ /4 x /2 x 1/ /2 x 3/ /2 x /2 x 1-1/ x x 1-1/ x 1-1/ Part # 304 S.S Size Part # 316 S.S / / / / / / / * 3000 L Forged Stainless Steel Fittings available HEX SOCKET PLUGS Part # Size 316 S.S /16" /8 " /4 " /8 " /2 " /4 " Fax: sales@global-hose.com 207

208 304 ND # STINLESS STEEL FITTINGS STINLESS STEEL HEX USHINGS HEX HED PLUGS NIPPLES & FITTINGS Part # 304 S.S Size Part # 316 S.S /4 x 1/ /8 x 1/ /8 x 1/ /2 x 1/ /2 x 1/ /2 x 3/ /4 x 1/ /4 x 3/ /4 x 1/ x 1/ x 3/ /4 x 1/ /4 x 3/ /4 x /2 x 1/ /2 x 3/ /2 x /2 x 1-1/ x 1/ x 3/ x x 1-1/ x 1-1/ /2 x 1-1/ /2 x x x 2-1/ x 3 UNIONS Part # 304 S.S Size Part # 316 S.S / / / / / / / SOLID HEX HED PLUGS Part # Size 316 S.S /8" /4" /8" /2" HEX NIPPLES Part # Size Part # 304 S.S 316 S.S / / / / / / / Part # 304 S.S Size Part # 316 S.S / / / / / / / * 3000 L Forged Stainless Steel Fittings available 208 Phone:

209 STINLESS STEEL SQURE HED PLUGS 304 ND # STINLESS STEEL FITTINGS STINLESS STEEL HLF COUPLINGS Part # 304 S.S Size Part # 316 S.S / / / / / / / Part # 304 S.S Size Part # 316 S.S / / / / / / HOSE NIPPLES NIPPLES & FITTINGS SOLID SQURE HED PLUGS Part # Size 316 S.S /8" /4" /8" /2" /4" HEX LOCKNUTS Part # 304 S.S Hose I.D. x Male Pipe Part # 316 S.S / / / / / / / REDUCING HOSE NIPPLES S.S. Part # 304 S.S Size Part # 316 S.S / / / / / / Can't find it here? sk us for price & availability. Part # Hose I.D. x 304 S.S Male Pipe /4 x 1/ /8 x 1/ /2 x 3/ /2 x 1/ /4 x 1/ x 3/ x 1/ /4 x /2 x 1-1/ /2 x x 1-1/ x 1-1/ Fax: sales@global-hose.com 209

210 3000 # THREDED FITTINGS #304 STINLESS STEEL NEW STINLESS STEEL 3000 L THREDED FITTINGS STM 182/SME S182 & NSI ELOWS STREET ELOWS 45 ELOWS NIPPLES & FITTINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" REDUCING COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " HLF COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " POR TEES Part # Size /8" /4" /8" /2" /4" " /4" /2" " Part # Size /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " POR CPS Part # Size /8" /4" /8" /2" /4" " /2" Phone:

211 STINLESS STEEL 3000 # SOCKET WELD FITTINGS #304 STM 182/SME S182 & NSI THREDED CONT. SOCKET WELD UNIONS 90 ELOWS TEES NEW Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " HEX USHING Part # Size /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 3/8" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 3/8" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" Part # Size /8" /4" /8" /2" /4" " /4" /2" " COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " REDUCING COUPLINGS Part # Size /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " CPS Part # Size /8" /4" /8" /2" /4" " /4" /2" " NIPPLES & FITTINGS Fax: sales@global-hose.com 211

212 NEW 3000 # THREDED FITTINGS #316 STINLESS STEEL STINLESS STEEL 3000 L THREDED FITTINGS STM 182/SME S182 & NSI ELOWS CPS COUPLINGS NIPPLES & FITTINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " ELOWS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " TEES Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " HLF COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " There are only two ways to live your life. One is as though nothing is a miracle. The other is as though everything is a miracle. lbert Einstein The best years of your life are the ones in which you decide your problems are your own. You do not blame them on your mother, the ecology, or the president. You realize that you control your own destiny. lbert Ellis The trouble with not having a goal is that you can spend your life running up and down the field and never score. ill Copeland Phone:

213 STINLESS STEEL 3000 # THREDED FITTINGS #316 REDUCING COUPLINGS HEX USHING SQURE PLUG NEW Part # Size /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" If what you re doing is not your passion, you have nothing to lose. Part Size # /4" x 1/8" /8" x 1/4" /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 3/8" " x 1/2" " x 3/4" " x 1" " x 1-1/2" " x 1-1/2" UNIONS Part # Size /8" /4" /8" /2" /4" " /4" /2" " HIGH PRESSURE HEX NIPPLES Part # Size PSI SS /4 x CL SS /4 x SS /4 x SS /8 x CL SS /8 x SS /2 x CL SS /2 x SS /2 x NIPPLES & FITTINGS It is never too late to be what you might have been. George Eliot Fax: Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " ll our dreams can come true if we have the courage to pursue them. Walt Disney sales@global-hose.com 213

214 NEW 3000 # SOCKET WELD FITTINGS #316 STINLESS STEEL 90 ELOWS SOCKET WELD STM 182/SME S182 & NSI REDUCING COUPLINGS 45 ELOWS NIPPLES & FITTINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " Part # Size /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" X 3/4" /2" x 1" /2" x 1-1/4" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" CPS Part # Size /2" /4" " /4" /2" " UNIONS Part # Size /8" /4" /8" /2" /4" " /4" /2" " TEES Part # Size /8" /4" /8" /2" /4" " /4" /2" " Part # Size /8" /4" /8" /2" /4" " /4" /2" " Phone:

215 STEEL NIPPLES lack and Galvanized Steel Nipples Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe up to 120. Technical Specifications Standards: Product complies with STM -53, -733 and NSI for threading, dimensions and pipe specifications. Pipe: Complies with STM -53 mill tested schedule 40 and 80 for both Welded & Seamless Meets NSI ll pipe is hydrostatic tested. Galvanized: Zinc coating applied by hot dipped. Galvanized complying with STM lack: Protected against oxidation with varnish coating. Cutting Procedure: ll pipe is roller cut. visual inspection of seams, excessive galvanizing, mid-welds, poor galvanizing, bends, roundness, under and over weight of the pipe is made at the time it is cut. This is done for every length of pipe. Pipe lengths are cut to a tolerance of + or - 1/16 of the actual length. Threading Procedure: ll pipe is chaser thread cut to merican Standard Tapered Pipe Thread standards. This is 3/4 taper per foot. Pipe is visually inspected for roundness of threads and other visual faults as it is removed from the threading machine. Steel and Wrought Iron Welded LCK ND GLVNIZED STEEL NIPPLES NIPPLES & FITTINGS Nominal Size Outside Diameter Wall Thickness Schedule 40 Standard Inside Diameter Weight per Foot P.E. Wall Thickness Schedule 80 Extra Heavy Inside Diameter Weight per Foot P.E. 1/8" /4" /8" /2" /4" " /4" /2" " /2" " /2" " " " Chemical Compostion Maximum% C 0.25 Mn 0.95 Tensile Requirements Kg/ Mm2 PSI Tensile Strength Min Tensile Strength Min MP Pounds per 100 pcs. approximate Diam Length close/rc 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 4-1/2" 5" 5-1/2" 6" 7" 8" 9" 10" 11" 12" 1/8" /4" /8" /2" /4" " /4" /2" " /2" " " " vailable Upon Request Fax: sales@global-hose.com 215

216 LCK ND GLVNIZED SCHEDULE 40 1/8" DIMETER STEEL NIPPLES 3/8" DIMETER NIPPLES & FITTINGS Part # Galv Length Part # lack X Close (3/4") x 1-1/2" x 2" x 2-1/2" x x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" /4" Diameter Part # Galv Length Part # lack X Close (7/8") x 1-1/2" x 2" x 2-1/2" x x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 18" x 24" Part # Galv Length Part # lack X Close (1") x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 18" x 24" x 30" x 36" x 42" x 48" x 60" x 72" lack Steel Nipples available in Schedule 40 Seamless beginning on page 221. lack Steel Nipples available in Schedule 80 beginning on page 234. Other Steel Nipples available upon request: Toe Nipples, see pg. 220 L&R Nipples Di-electric Nipples Nipple ssortments Nipples cut to any lengths More sizes available 216 Phone:

217 STEEL NIPPLES LCK ND GLVNIZED SCHEDULE 40 1/2" DIMETER 3/4" DIMETER Part # Galv Length Part # lack X Close (1-1/8") x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 18" x 24" x 30" x 36" x 42" x 48" x 60" x 72" Part # Galv Length Part # lack X Close (1-3/8") x 1-1/2" x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 18" x 24" x 30" x 36" x 42" x 48" x 60" x 72" NIPPLES & FITTINGS little girl, dressed in her Sunday best, was running as fast as she could, trying not to be late for ible class. s she ran she prayed, 'Dear Lord, please don't let me be late! Dear Lord, please don't let me be late!' While she was running and praying, she tripped on a curb and fell, getting her clothes dirty and tearing her dress. She got up, brushed herself off, and started running again! s she ran she once again began to pray, 'Dear Lord, please don't let me be late...ut please don't shove me either!' Fax: sales@global-hose.com 217

218 LCK ND GLVNIZED SCHEDULE 40 STEEL NIPPLES 1" DIMETER 1-1/4" DIMETER NIPPLES & FITTINGS Part # Galv Length Part # lack X Close (1-1/2") x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 18" x 24" x 30" x 36" x 42" x 48" x 60" x 72" Part # Galv Length Part # lack X Close (1-5/8") x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 18" x 24" x 30" x 36" x 42" x 48" x 60" x 72" Five (5) lessons about the way we treat people 1 - First Important Lesson - Cleaning Lady. During my second month of college, our professor gave us a pop quiz. I was a conscientious student and had breezed through the questions until I read the last one: "What is the first name of the woman who cleans the school?" Surely this was some kind of joke. I had seen the cleaning woman several times. She was tall, dark-haired and in her 50's, but how would I know her name? I handed in my paper, leaving the last question blank. Just before class ended, one student asked if the last question would count toward our quiz grade. "bsolutely, " said the professor.. "In your careers, you will meet many people. ll are significant.. They deserve your attention and care, even if all you do Is smile and say "hello.." I've never forgotten that lesson.. I also learned her name was Dorothy. 218 Phone:

219 STEEL NIPPLES LCK ND GLVNIZED SCHEDULE /2" DIMETER 2" DIMETER Part # Galv Length Part # lack X Close (1-3/4") x 2" x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 18" x 24" x 30" x 36" x 42" x 48" x 60" x 72" Part # Galv Length Part # lack X Close (2") x 2-1/2" x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 18" x 24" x 30" x 36" x 42" x 48" x 60" x 72" NIPPLES & FITTINGS Five (5) lessons about the way we treat people 2. - Second Important Lesson - Pickup in the Rain One night, at 11:30 p.m., an older frican merican woman was standing on the side of an labama highway trying to endure a lashing rain storm. Her car had broken down and she desperately needed a ride. Soaking wet, she decided to flag down the next car. young white man stopped to help her, generally unheard of in those conflict-filled 1960's. The man took her to safety, helped her get assistance and put her into a taxicab. She seemed to be in a big hurry, but wrote down his address and thanked him. Seven days went by and a knock came on the man's door. To his surprise, a giant console color TV was delivered to his home. special note was attached. It read: "Thank you so much for assisting me on the highway the other night. The rain drenched not only my clothes, but also my spirits. Then you came along. ecause of you, I was able to make it to my dying husband's' bedside just before he passed away... God bless you for helping me and unselfishly serving others." Sincerely, Mrs. Nat King Cole. Fax: sales@global-hose.com 219

220 LCK ND GLVNIZED SCHEDULE /2" DIMETER STEEL NIPPLES 3" DIMETER NIPPLES & FITTINGS 220 Part # Galv Length Part # lack X Close (2-1/2") x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" Phone: " DIMETER Part # Galv Length Part # lack X Close (2-7/8") /2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 12" 6" DIMETER Part # 6" Dia. Part # Galv lack Close (3-1/8") Part # Galv Length Part # lack X Close (2-5/8") x 3" x 3-1/2" x 4" x 4-1/2" x 5" x 5-1/2" x 6" x 7" x 8" x 9" x 10" x 11" x 12" x 24" LCK STEEL TOE NIPPLE Toe nipples are only threaded on one end to allow for easy connections, unthreaded end allows for welding a permanent leak-resisteant bond. Roller cut Reamed and Chamfer or Saw Cut available upon request. Part # Size T 1/4" x 1-1/2" T 1/4" x 2" T 3/8" x 1-1/2" T 3/8" x 2" T 1/2" x 1-1/2" T 1/2" x 2" T 3/4" x 1-1/2" T 3/4" x 2" T 1" x 2" T 1" x 2-1/2" T 1-1/4" x 2" T 1-1/4" x 2-1/2" T 1-1/2" x 2" T 1-1/2" x 2-1/2" T 2" x 2" T 2" x 2-1/2" T* 2-1/2" x 3" T* 3" x 3" T* 4" x 4" * Saw Cut

221 STEEL NIPPLES SCHEDULE 40 SEMLESS NIPPLES 1/8" DIMETER LCK SCHEDULE 40 SEMLESS SCHEDULE 40 SEMLESS NIPPLES 1/2" DIMETER Part # Length X Close (3/4 ) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 40 SEMLESS NIPPLES 1/4" DIMETER Part # Length X Close (1-1/8) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 40 SEMLESS NIPPLES 3/4" DIMETER NIPPLES & FITTINGS Part # Length X Close (7/8 ) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ SCHEDULE 40 SEMLESS NIPPLES 3/8" DIMETER Part # Length X Close (1-3/8 ) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 40 SEMLESS NIPPLES 1" DIMETER Part # Length X Close (1 ) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x Part # Length X Close (1-1/2 ) x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x Fax: sales@global-hose.com 221

222 LCK SCHEDULE 40 SEMLESS SCHEDULE 40 SEMLESS NIPPLES 1-1/4" DIMETER STEEL NIPPLES SCHEDULE 40 SEMLESS NIPPLES 2-1/2" DIMETER NIPPLES & FITTINGS Part # Length X Close (1-5/8 ) x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 40 SEMLESS NIPPLES 1-1/2" DIMETER Part # Length X Close (2-1/2 ) x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 40 SEMLESS NIPPLES 3" DIMETER Part # Length X Close (1-3/4 ) x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 40 SEMLESS NIPPLES 2" DIMETER Part # Length X Close (2-5/8 ) x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 40 SEMLESS NIPPLES 4" DIMETER Part # Length X Close (2 ) x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x Part # Length X Close (2-7/8 ) x x 4-1/ x x 5-1/ x Phone:

223 STEEL COUPLINGS Product Specifications Welded steel couplings both galvanized and black in diameters from 1/8 up to 4. Technical Specifications LCK ND GLVNIZED MERCHNT COUPLINGS Standards: Product complies with STM -53, -733 and NSI for threading, dimensions and pipe specifications. Pipe: Complies with STM -53 milltested schedule 40 and 80. Meets NSI ll pipe is hydrostatic tested. Galvanized: Zinc coating applied by hot dipping. Galvanized complying with STM MERCHNT COUPLINGS HLF MERCHNT COUPLINGS Part # Galv Size Part # lack /8" /4" /8" /2" /4" " /4" /2" " /2" " " MERCHNT COUPLINGS SPECIFICTIONS Part # Galv Size Part # lack 1/4" H /8" H H /2" H H /4" H H " H H /4" H H /2" H H " H /2" H " H " H lso available: PI Line Couplings L&R Merchant Coupling NIPPLES & FITTINGS Size Outside Length Weight 100 pcs approx. Quantity Threads per Threads Diam. Inches Pounds per box Inch Type 1/8".59" Straight 1/4".73" Straight 3/8".86" 1.18" Straight 1/2" 1.063" 1-9/16" Straight 3/4" 1.313" 1-5/8" Straight 1" 1.576" 2" /2 Straight 1-1/4" 1.900" 2-1/16" /2 Straight 1-1/2" 2.200" 2-1/16" /2 Straight 2" 2.750" 2-1/8" /2 Straight 2-1/2" 3.250" 3-1/8" Taper Tapped 3" 4.000" 3-1/4" Taper Tapped 4" 5.000" 3-1/2" Taper Tapped Fax: sales@global-hose.com 223

224 LCK & GLVNIZED MLLELE IRON 150# MLLELE FITTINGS ISO CERTIFICTE OF QULITY - UL/FM LISTED ND PPROVED Our quality fittings are made with care and attention to detail. With better molds we can reduce parting lines and rough edges resulting in better fluid flow. y using a low temperature galvanizing process the coating is more durable which means a longer lasting fitting. (Every fitting is subjected to an underwater fitness test to ensure the highest quality) SPECIFICTIONS MTERIL: STM Cuppla Malleable Iron, STM Hot dipped galvanizing DIMENSIONS: NSI Malleable Iron threaded fittings, NSI Ferrous Pipe Plugs, ushings etc..., NSI Malleable Iron threaded pipe unions. THREDS: NSI 2.1 or S 21 PHYSICL PROPERTIES: Tensile Strength kg./mm. Min. Elongation - 5% min. ELOWS 90 NIPPLES & FITTINGS Part # Galvanized Size ox/ Case pprox. Part # lack / / / / / / / / / / / / / / / / / REDUCING ELOWS 90 Part # Size ox/ pprox. Part # Galvanized Case lack /8 x 1/ / /8 x 1/ / /2 x 1/ / /2 x 3/ / /4 x 3/ / /4 x 1/ / x 1/ / x 3/ / /4 x 3/ / /4 x / /2 x 3/ / /2 x / /2 x 1-1/ / x 3/ / x / x 1-1/ / x 1-1/ / /2 x 1-1/ / /2 x / x 1-1/ / x 2-1/ / x / x 2-1/ / x / Phone:

225 MLLELE FITTINGS LCK & GLVNIZED MLLELE IRON 150# 90 STREET ELOWS ELOWS 45 Part # Galvanized Size ox/ Case pprox. Part # lack / / / / / / / / / / / / / / / / / / NIPPLES & FITTINGS Part # Galvanized Size ox/ Case pprox. Part # lack / / / / / / / / / / / / / / / / / STREET ELOWS Part # Galvanized Size ox/ Case pprox. Part # lack / / / / / / / / / / / / / / / / / / / Fax: sales@global-hose.com 225

226 LCK & GLVNIZED MLLELE IRON 150# MLLELE FITTINGS TEES NIPPLES & FITTINGS Part # Galvanized Size ox/ Case pprox. Part # lack / / / / / / / / / / / / / / / / / / / ULLHED TEES Part # Galvanized Size (1&2) x 3 ox/ Case pprox. Part # lack /2" x 3/ / /2 x / /4 x / x 1-1/ / x 1-1/ / /4 x 1-1/ / /2 x COUPLINGS Part # Galvanized Size ox/ Case pprox. Part # lack / / / / / / / / / / / / / / / / / / / Phone:

227 MLLELE FITTINGS LCK & GLVNIZED MLLELE IRON 150# REDUCING TEES (SME SIZE ON RUN, REDUCING ON RNCH) Part # Galvanized Size (1&2) x 3 ox/ Case pprox. Part # lack /8 x 1/ /2 x 1/ / /2 x 3/ / /4 x 1/ /4 x 3/ / /4 x 1/ / x 1/ / x 3/ / x 1/ / x 3/ / /4 x 1/ / /4 x 3/ / /4 x / /2 x 3/ / /2 x / /2 x 1-1/ / x 1/ / x 3/ / x / x 1-1/ / x 1-1/ / /2 x 1-1/ / x / NIPPLES & FITTINGS REDUCING TEES 1 2 C 3 (REDUCING ON RUN) Part # Galvanized Size 1 x 2 x 3 C ox/ Case pprox. Part # lack /4 x 1/2 x 1/ / /4 x 1/2 x 3/ / " x 1/2" x 1/2" / x 3/4 x 3/ / /4 x 1 x / LOCKNUTS Part # Galvanized Size Thickness ox/ Case pprox / / / / / / / / / / * lack locknuts available on special order basis. Fax: sales@global-hose.com 227

228 LCK & GLVNIZED MLLELE IRON 150# MLLELE FITTINGS MLLELE SERVICE TEE (STREET TEE) Part # Galvanized Size ox/ Case pprox. Part # lack / / / / SIDE OUTLET TEES NIPPLES & FITTINGS REDUCING COUPLINGS Part # Size ox/ pprox. Part # Galvanized Case lack / / / / / / / Part # Galvanized Size ox/ Case pprox. Part # lack /4 x 1/ / /8 x 1/ / /8 x 1/ / /2 x 1/ / /2 x 1/ / /2 x 3/ / /4 x 1/ / /4 x 1/ / /4 x 3/ / /4 x 1/ / x 1/ / x 3/ / x 1/ / x 3/ / /4 x 3/ / /4 x 1/ / /4 x 3/ / /4 x / /2 x 3/ / /2 x 1/ / /2 x 3/ / /2 x / /2 x 1-1/ / x 1/ / x 3/ / x / x 1-1/ / x 1-1/ / /2 x 1-1/ / /2 x / x 1-1/ / x / x 2-1/ / x / x 2-1/ / x / x / Phone:

229 MLLELE FITTINGS LCK & GLVNIZED MLLELE IRON 150# HEX USHING Size Part # Galvanized ox/ Case pprox. Part # lack M x F *1/4 x 1/8 *3/8 x 1/8 *3/8 x 1/4 Use steel fittings for smaller sizes - See page 232 } /2 x 1/ / *1/2 x 1/ /2 x 3/ / /4 x 1/ / /4 x 1/ / /4 x 3/ / /4 x 1/ / x 1/ / x 3/ / x 1/ / x 3/ / /4 x 1/ / /4 x 3/ / /4 x 1/ / /4 x 3/ / /4 x / /2 x 1/ / /2 x 3/ / /2 x 1/ / /2 x 3/ / /2 x / /2 x 1-1/ / x 3/ / x 1/ / x 3/ / x / x 1-1/ / x 1-1/ / /2 x 1/ / /2 x 3/ / /2 x / /2 x 1-1/ / /2 x 1-1/ / /2 x / x / x 1-1/ / x 1-1/ / x / x 2-1/ / x 3/ / x / x 1-1/ / x / x 2-1/ / x / x / NIPPLES & FITTINGS Fax: sales@global-hose.com 229

230 LCK MLLELE & GLVNIZED FITTINGS MLLELE IRON 150# MLLELE FITTINGS NIPPLES & FITTINGS UNIONS SQURE HED PLUGS Part # Galvanized Size ox/ Case pprox. Part # lack / / / / / / / / / / / / / / / / / / / / C Part # Size C ox/ pprox. Part # Galvanized Case lack *1/8 *1/4 Use steel fittings for smaller sizes - see p. 232 } *3/ / / / / / / / / / / / / / / CROSSES Part # Galvanized Size ox/ Case pprox. Part # lack / / / / / / / / / / / / / / / / / / Don't see what your looking for? Nipples, Wyes, etc... Just call us for availability. 230 Phone:

231 MLLELE FITTINGS LCK & GLVNIZED STEEL FITTINGS CPS FLOOR FLNGES Hole Size Part # Galvanized Size ox/ Case pprox. Part # lack 1/4" / / / / / / / / / / / / / / / / / * Use steel fittings for smaller sizes. See page 224 for Galvanized and lack Steel Fittings. Part # Galvanized Size Thickness Hole Size ox/ Case pprox. Part # lack / / / / / / / / / / STEEL MGNETIC PLUGS Magnetic Plugs Steel Magnetic Drain Plugs - NPT Threaded Magnetic Drain Plugs are similar to standard pipe or straight thread drain plugs with one important difference - a permanent magnet is fastened to the plug body. This magnet attracts and holds abrasive, ferrous metal particles preventing their circulation through the lubrication or hydraulic system. NIPPLES & FITTINGS These abrasive, ferrous metal particles appear in lubricating or hydraulic systems as a result of the following conditions: The constant flaking effect of normal wear of moving parts. Particles not removed by flushing operations after boring or machining. Chipping due to sub-surface casting flaws. Minute component breakdown caused by stress usage. Magnetic Drain Plugs prevent excessive wear to the system's components. Magnetic Plugs are used by numerous manufacturers of gear boxes, transmissions, engines, and hydraulic systems for the automotive, aircraft, agricultural and machinery industries. Typical applications include: Outbound Engines Earthmoving Equipment Combines alers Crawler Tractors Lift Trucks Mining Equipment Military Vehicles Turbine Engines Truck xles Heavy-Duty Transmissions Part Size "" Head Width "C" Recess Dia. "H" O/L Length "L" / / / / Fax: sales@global-hose.com 231

232 LCK & GLVNIZED STEEL FITTINGS STEEL FITTINGS NIPPLES & FITTINGS HEX USHINGS Part # Size pprox. Part # Galvanized M x F lack /4 x 1/ /8 x 1/ /8 x 1/ /2 x 1/ /2 x 1/ /2 x 3/ /4 x 1/ /4 x 1/ /4 x 3/ /4 x 1/ x 1/ x 3/ x 1/ x 3/ CPS Part # Galvanized Size pprox. Part # lack / / / / / /4" /2" " SQURE HED PLUGS C Part # Galvanized Size C pprox. Part # lack 1/ / / / / / " /4" /2" " HEX HED PLUGS Part # Size pprox. Part # Galvanized lack / / / / / /4" /2" " Phone:

233 STEEL FITTINGS LCK & GLVNIZED STEEL FITTINGS COUNTERSUNK PLUG - Square Socket Galvanized lack Part # Size Socket Size pprox. Part # / / / / / /4" /2" " NIPPLES & FITTINGS COUNTERSUNK PLUG - Socket Galvanized lack Part # Size Socket Size pprox. Part # / / / / / / /4" /2" " FCE USHING Galvanized lack Part # Size pprox. Part # M x F /4 x 1/ /8 x 1/ /8 x 1/ /2 x 1/ /2 x 1/ /2 x 3/ /4 x 1/ /4 x 3/ /4 x 1/ x 3/ x 1/ x 3/ Fax: sales@global-hose.com 233

234 LCK & GLVNIZED SCHEDULE 80 SCHEDULE 80 EXTR HEVY NIPPLES 1/8" DIMETER STEEL NIPPLES STNDRDS & SPECIFICTIONS DIMENSIONL: STM 733 MTERIL: STM 53 Type F or Type E GLVNIZING: Hot dip galvanizing THREDING: SME Max Pressure: 200 psi 72 F; 150 psi saturated steam SCHEDULE 80 EXTR HEVY NIPPLES 3/8" DIMETER NIPPLES & FITTINGS Galvanized lack Part # Length Part # Close (3/4") /2" " /2" " /2" " /2" " /2" " " " " " " " SCHEDULE 80 EXTR HEVY NIPPLES 1/4" DIMETER Galvanized lack Part # Length Part # Close (1") /2" " /2" " /2" " /2" " /2" " " " " " " " SCHEDULE 80 EXTR HEVY NIPPLES 1/2" DIMETER 234 Galvanized lack Part # Length Part # Close (3/4") /2" " /2" " /2" " /2" " /2" " " " " " " " Phone: Galvanized lack Part # Length Part # Close (1-1/8") /2" " /2" " /2" " /2" " /2" " " " " " " "

235 STEEL NIPPLES SCHEDULE 80 EXTR HEVY NIPPLES 3/4" DIMETER LCK & GLVNIZED SCHEDULE 80 SCHEDULE 80 EXTR HEVY NIPPLES 1-1/4" DIMETER Galvanized lack Part # Length Part # Close (1-3/8") /2" " /2" " /2" " /2" " /2" " " " " " " " SCHEDULE 80 EXTR HEVY NIPPLES 1" DIMETER Galvanized lack Part # Length Part # Close (1-5/8") " /2" " /2" " /2" " /2" " " " " " " " SCHEDULE 80 EXTR HEVY NIPPLES 1-1/2" DIMETER NIPPLES & FITTINGS Galvanized lack Part # Length Part # Close (1-1/2") " /2" " /2" " /2" " /2" " " " " " " " Galvanized lack Part # Length Part # Close (1-3/4") " /2" " /2" " /2" " /2" " " " " " " " Fax: sales@global-hose.com 235

236 LCK & GLVNIZED SCHEDULE 80 SCHEDULE 80 EXTR HEVY NIPPLES 2" DIMETER STEEL NIPPLES SCHEDULE 80 EXTR HEVY NIPPLES 3" DIMETER NIPPLES & FITTINGS Galvanized lack Part # Length Part # Close (2") /2" " /2" " /2" " /2" " " " " " " " Galvanized lack Part # Length Part # Close (2-5/8") " /2" " /2" " /2" " " " " " " " SCHEDULE 80 EXTR HEVY NIPPLES 2-1/2" DIMETER SCHEDULE 80 EXTR HEVY NIPPLES 4" DIMETER Galvanized lack Part # Length Part # Close (2-1/2") " /2" " /2" " /2" " " " " " " " Galvanized lack Part # Length Part # Close (2-7/8") " /2" " /2" " " " " " " " Phone:

237 STEEL NIPPLES LCK EXTR HEVY SCH80 SEMLESS STNDRDS & SPECIFICTIONS DIMENSIONL: STM 733 MTERIL: STM 106 Grade GLVNIZING: Hot dip galvanizing THREDING: SME Thicker walls Excellent leak protection Max Pressure: 300 psi 150 F; 150 psi saturated steam SCHEDULE 80 SEMLESS NIPPLES 1/8" DIMETER SCHEDULE 80 SEMLESS NIPPLES 1/2" DIMETER Part # Length X Close (3/4 ) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 80 SEMLESS NIPPLES 1/4" DIMETER Part # Length X Close (1-1/8) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 80 SEMLESS NIPPLES 3/4" DIMETER NIPPLES & FITTINGS Part # Length X Close (7/8 ) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 80 SEMLESS NIPPLES 3/8" DIMETER Part # Length X Close (1-3/8 ) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 80 SEMLESS NIPPLES 1" DIMETER Part # Length X Close (1 ) x 1-1/ x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x Part # Length X Close (1-1/2 ) x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x Fax: sales@global-hose.com 237

238 LCK EXTR HEVY SCH80 SEMLESS STEEL NIPPLES SCHEDULE 80 SEMLESS NIPPLES 1-1/4" DIMETER SCHEDULE 80 SEMLESS NIPPLES 2-1/2" DIMETER NIPPLES & FITTINGS Part # Length X Close (1-5/8 ) x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 80 SEMLESS NIPPLES 1-1/2" DIMETER Part # Length X Close (2-1/2 ) x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 80 SEMLESS NIPPLES 3" DIMETER Part # Length X Close (1-3/4 ) x x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x Part # Length X Close (2-5/8 ) x x 3-1/ x x 4-1/ x x 5-1/ x SCHEDULE 80 SEMLESS NIPPLES 2" DIMETER SCHEDULE 80 SEMLESS NIPPLES 4" DIMETER Part # Length X Close (2 ) x 2-1/ x x 3-1/ x x 4-1/ x x 5-1/ x Part # Length X Close (2-7/8 ) x x 4-1/ x x 5-1/ x Phone:

239 MLLELE FITTINGS EXTR HEVY 300# MLLELE IRON Max. pressure: 300 psi 72 F; 150 psi WOG saturated steam Meet NSI/ SME standards Galvanized meet SME 16.3 Standards lack meet STM 197 standards 90 0 ELOWS Galvanized lack Part # Size Part # /4" /8" /2" /4" " /4" /2" " ELOWS Galvanized lack Part # Size Part # /4" /8" /2" /4" " /4" /2" " STREET ELOWS Galvanized lack Part # Size Part # /4" /8" /2" /4" " /4" /2" " TEES Galvanized lack Part # Size Part # /8" /2" /4" " /4" /2" " COUPLINGS Galvanized lack Part # Size Part # /4" /8" /2" /4" " /4" /2" " REDUCING COUPLING Galvanized lack Part # Size Part # /8 x 1/4" /2 x 1/4" /2 x 3/8" /4 x 1/2" x 1/2" x 3/4" CPS Galvanized lack Part # Size Part # /4" /8" /2" /4" " /4" /2" " UNIONS Galvanized lack Part # Size Part # /8" /4" /8" /2" /4" " /4" /2" " NIPPLES & FITTINGS Fax: sales@global-hose.com 239

240 USHINGS & PLUGS FORGED STEEL FITTINGS Water, oil and steam in the chemical, petrochemical, pulp, paper, shipbuilding, waste incineration and semiconductor industries. Max pressure determined by the fittings threaded into. NEW FORGED USHING HEX HED FORGED PLUG What the mind can conceive, it can achieve. Napoleon Hill NIPPLES & FITTINGS Part # Size /4" x 1/8" /8" x 1/8" /8" x 1/4" /2" x 1/8" /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 1/4" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" /2" x 1" /2" x 1-1/4" /2" x 1-1/2" /2" x 2" " x 1" " x 1-1/2" " x 2" " x 2-1/2" " x 1-1/2" " x 2" " x 2-1/2" " x 3" Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " SQURE HED FORGED PLUG Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " It is not because things are difficult that we do not dare; it is because we do not dare that things are difficult. Seneca Great minds discuss ideas. verage minds discuss events. Small minds discuss people. - Eleanor Roosevelt Gravitation is not responsible for people falling in love. -lbert Einstein. If opportunity doesn t knock, build a door. -Milton erle The sky has never been the limit. We are our own limits. It s then about breaking our personal limits and outgrowing ourselves to live our best lives. - unknown Phone:

241 2000# FORGED STEEL FITTINGS 2000 L FORGED STEEL THREDED FITTINGS STM: 105 NSI: ELOWS CROSS STREET ELOWS 3000# NEW Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " Part # Size /8" /2" /4" " /4" /2" " FORGED STEEL 3000# FITTINGS Part # Size /4" /8" /2" /4" " /4" /2" " ELOWS NIPPLES & FITTINGS 45 0 ELOWS 90 0 ELOWS Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " TEES Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " TEES Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " For 3000# Socket Weld Forged Steel fittings, replace the 101 part# prefix with a 111 prefix. * Special Order Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " Fax: sales@global-hose.com 241

242 NIPPLES & FITTINGS FORGED STEEL 3000# FITTINGS NEW CROSS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " HLF COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " L FORGED STEEL THREDED FITTINGS STM 105/SME S105 & NSI CPS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " FORGED STEEL FITTINGS REDUCING COUPLINGS Part # Size /4" x 1/8" /8" x 1/8" /8" x 1/4" /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 1" /2" x 1-1/4" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" " x 1/2" /2" x 1-1/2" /2" x 2" " x 1-1/2" " x 2" " x 2-1/2" " x 1-1/2" " x 2" " x 2-1/2" " x 3" UNIONS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " " Phone:

243 FORGED STEEL FITTINGS 90 0 ELOWS 6000 L FORGED STEEL THREDED FITTINGS STM: 105 NSI: CROSS FORGED STEEL 6000# FITTINGS COUPLINGS NEW Part # Size /8" POR /4" /8" /2" /4" " /4" /2" " " TEES Part # Size /4" /8" /2" /4" " /4" /2" " /2" POR " POR For 6000# Socket Weld Part # Size /2" /4" " /4" /2" " /2" " HLF COUPLINGS Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " CPS Part # Size /8" /4" /8" /2" /4" " /4" /2" " REDUCING COUPLINGS Part # Size /2" x 1/4" POR /2" x 3/8" POR /4" x 3/8" /4" x 1/2" " x 3/8" " x 1/2" " x 3/4" /4" x 3/8" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 1" /2" x 1-1/4" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" " x 1/2" UNIONS NIPPLES & FITTINGS Forged Steel fittings, replace the 102 part# prefix with a 112 prefix. * Special Order Part # Size /8" /4" /8" /2" /4" " /4" /2" " /2" " Part # Size /8" /4" /8" /2" /4" " /4" /2" " Fax: sales@global-hose.com 243

244 WROT SOLDER JOINT COPPER FITTINGS T O K T O O T T O G G MLE (FITTING) F T T FEMLE (COPPER) F NIPPLES & FITTINGS Nominal Size Outside Diameter () in verage Tolerance (mm) Male End ctual MIN in Joint Ends Length O.D. (Min) H MX in (in) 2/8 2/8 3/8 2/8 Inside Diameter F (in) verage Tolerance (mm) Female End ctual MIN in Metal Thickness T (in) Inside Diameter O (in) Length O.D. (Min) G MX in (in) 2/8 2/8 3/8 0 2/8 1/8 2/8 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 0 2/8 3/8 4/8 4/8 4/8 3/8 4/8 4/8 4/8 3/8 0 3/ /2 5/8 5/8 5/8 4/8 5/8 5/8 5/8 3/8 0 4/8 5/8 6/8 6/8 6/8 5/8 6/8 6/8 6/8 5/8 0 4/8 3/4 7/8 7/8 7/8 6/8 7/8 7/8 7/8 5/8 0 5/ /8 1-1/8 1-1/8 7/8 1-1/8 1-1/8 1-1/8 7/8 0 7/ /4 1-3/8 1-3/8 1-3/ /8 1-3/8 1-3/ /8 1-1/2 1-5/8 1-5/8 1-5/8 1-1/8 1-5/8 1-5/8 1-5/8 1-1/ / /8 2-1/8 2-1/8 1-3/8 2-1/8 2-1/8 2-1/8 1-2/ /8 2-1/2 2-5/ /8 2-5/8 1-4/8 2-5/ /8 2-5/8 1-4/8 1/8 2-1/ /8 3-1/8 2-1/8 1-6/8 3-1/8 3-1/8 3-1/8 1-5/8 1/8 2-5/ /8 4-1/8 4-1/8 2-1/8 4-1/8 4-1/8 4-1/8 2-1/8 1/8 3-4/ /8 1-1/8 5-1/8 2-6/8 5-1/8 5-1/8 5-1/8 2-5/8 1/8 4-5/ / /8 6-1/8 3-2/8 6-1/ /8 6-1/8 3-1/8 1/8 5-6/ /8 8-1/8 8-1/8 4-1/8 8-1/8 8-1/8 8-1/8 3-7/8 1/8 7-4/ / /8 10-1/8 4-4/8 10-2/ /8 10-2/8 4-3/8 2/8 9-2/8 Symbol of Joint Ends C Ftg. F M Solder joint fitting end made to receive copper tube diameter Solder joint fitting end made to copper tube diameter Internal NSI Standard Taper Pipe Thread-Female External NSI Standard Taper Pipe Thread-Male The above conforms to STM 88 & STM 306 Warranty: Seller warrants that all fittings will be free from defects in materials and construction that will impair their usefulness, provided they are used as recommended. ny fitting that proves to be defective will be replaced or a credit issued but no incidental labor charges, expenses or damages will be allowed. 1/8" 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" 1-1/2" 2" 244 Phone:

245 COPPER FITTINGS WROT SOLDER JOINT Part# Nominal pprox Net Wt. Ind # 90 Ell C x C WE-500-R 607-R 107-C /8" 0.01 W /4" 0.01 W /8" 0.03 W /8" x 1/4" 0.03 W /2" 0.04 W /2"x3/8" - W /8" 0.07 W /4" 0.09 W /4" x 1/2" 0.12 W " 0.17 W "x3/4" 0.23 W "x1/2" 0.23 W /4" 0.27 W /2" 0.41 W " 0.73 W "x1-1/2" 0.73 W /2" 1.16 W " 1.87 W " 3.79 W NIPPLES & FITTINGS 90 Street Ell Ftg. x C 90 Long Turn Ell C x C WE-500-L 607-LT 107-L /4" 0.01 W /8" 0.03 W /2" 0.05 W /8" 0.07 W /4" 0.12 W " 0.22 W /4" 0.33 W /2" 0.45 W " 0.87 W " 1.93 W /8" 0.01 W /4" 0.02 W /16" /8" 0.04 W /2" 0.06 W /8" 0.10 W /4" 0.15 W Long Turn Street Ell Ftg. x C Fax: WE-503-L 607-2LT /8" /4" 0.22 W /8" 0.04 W /2" 0.06 W /8" 0.11 W /4" 0.15 W See copper fitting brushes on page sales@global-hose.com 245

246 WROT SOLDER JOINT COPPER FITTINGS 45 ELL C x C WE Part# Nominal pprox Net Wt. Ind # /8" 0.01 W /4" 0.01 W /8" 0.02 W /2" 0.04 W /8" 0.06 W /4" 0.10 W " 0.19 W /4" 0.27 W /2" 0.39 W " 0.75 W /2" 1.23 W NIPPLES & FITTINGS Street 45 Ftg. x C WE /4" 0.01 W /8" 0.02 W /2" 0.06 W /8" 0.06 W /4" 0.10 W " 0.18 W /4" 0.27 W /2" 0.38 W " 0.75 W Coupling (Socket) w/rolled Tube Stop C x C WC /8" 0.01 W /4" 0.01 W /8" 0.02 W /2" 0.03 W /8" 0.04 W /4" 0.06 W " 0.10 W /4" 0.15 W /2" 0.22 W " 0.39 W /2" 0.71 W " 0.98 W " 2.01 W Coupling (Socket) Less Tube Stop C x C WC-400NS /8" 0.01 W /4" 0.01 W /2" 0.03 W /4" 0.06 W " 0.10 W /4" 0.15 W /2" 0.22 W " 0.39 W Phone:

247 COPPER FITTINGS Coupling (Socket) w/dimpled Tube Stop C x C WC-400S WROT SOLDER JOINT Part# Nominal pprox Net Wt. Ind # /2" /4" " /4" " " Reducer Coupling w/ Stop C x C WC-400R 600-R /4" x 1/8" 0.01 W /8" x 1/4" 0.02 W /2" x 3/8" 0.03 W /2" x 1/4" 0.03 W /8" x 1/2" 0.04 W /4" x 1/2" 0.06 W /4" x 3/8" 0.06 W /4" x 1/4" 0.06 W "x3/4" 0.12 W "x1/2" 0.10 W /4" x 1" 0.17 W /4" x 3/4" 0.17 W /4" x 1/2" 0.14 W /2" x 1-1/4" 0.24 W /2" x1" 0.24 W /2" x 3/4" 0.25 W /2" x 1/2" 0.19 W " x 1-1/2" 0.42 W x 1-1/4" 0.46 W " x 1" 0.48 W /2"x2" 0.79 W " x 2-1/2" 1.15 W NIPPLES & FITTINGS Fitting Reducer Ftg. x C WC Fax: /8" x 1/4" 0.02 W /8" x 1/8" 0.01 W /2" x 1/4" 0.03 W /8" X 1/2" 0.03 W /4" x 5/8" 0.08 W /4" x 1/2" 0.06 W /4" x 3/8" 0.05 W /4" X 1/4" 0.05 W "x3/4" 0.11 W " x 1/2" 0.10 W /4" x1" 0.17 W /4" x 3/4" 0.15 W /4" x 1/2" 0.14 W /2" X 1-1/4" 0.21 W /2"x1" 0.22 W /2" x 3/4" 0.21 W /2" x 1/2" 0.21 W " x 1-1/2" 0.39 W " x 1-1/4" 0.38 W " x 1" 0.40 W " x 3/4" 0.39 W " x 1/2" 0.44 W " x 2-1/2" 0.93 W sales@global-hose.com 247

248 WROT SOLDER JOINT COPPER FITTINGS Flush ushing Ftg. x C WC Part# Nominal pprox Net Wt. Ind # /4" x 1/2" 0.08 W /4" x 5/8" 0.04 W " x 3/4" 0.13 W " x 1/2" 0.22 W /4" x 3/4" 0.30 W /2" x 1-1/4" 0.22 W " x 1-1/2" 0.68 W NIPPLES & FITTINGS Male dapter C x M WC /8" 0.02 W /4" 0.03 W /4" x 1/2" 0.09 W /4"x3/8" 0.06 W /4" x 1/8" 0.02 W /8" 0.06 W /2" 0.08 W /2"x3/4" 0.16 W /4" 0.14 W /4" x 1" " 0.24 W "x3/4" 0.18 W /4" 0.41 W /2" 0.50 W /2" x 1-1/4" 0.44 W " 0.87 W Fitting Male dapters Ftg. x M WC /2" 0.09 W /2" x 3/4" /4" 0.15 W /4" 0.41 W " 0.86 W Can't find it here? sk us for price & availability. My grandpa started walking five miles a day when he was 60. Now he's 97 years old and we don't know where he is. 248 Phone: M M F G M

249 WC COPPER FITTINGS Female dapters C x F WC WC402R 603R Fitting Female dapt. Ftg. x F WC405R 603R WROT SOLDER JOINT Part# Nominal pprox Net Wt. Ind # /8" 0.03 W /4" 0.04 W /8" 0.06 W /8" x 1/2" 0.10 W /2" 0.10 W /2" x 3/4" 0.15 W /2"x3/8" 0,70 W /2" x 1/4" 0.05 W /4" 0.14 W /4" x 1/2" 0.11 W " 0.24 W "x3/4" 0.22 W "x 1/2" 0.29 W /4" 0.43 W /4" x 1-1/2" 0.52 W /4" x 3/4" /2" 0.58 W " 0.74 W " 1.83 W /8" 0.05 W /2" 0.11 W /4" 0.19 W " 0.25 W /2" 0.55 W " 0.68 W NIPPLES & FITTINGS Cap WC Unions C x C WC-407 U-Type Strap WS /8" W /4" 0.01 W /8" 0.01 W /2" 0.02 W /8" 0.03 W /4" 0.04 W " 0.08 W /4" 0.11 W /2" 0.18 W " 0.30 W /4" 0.11 W /8" 0.11 W /2" 0.17 W /4" 0.37 W " 0.51 W /8" /4" /8" /2" /4" " /4" /2" Fax: sales@global-hose.com 249

250 WROT SOLDER JOINT COPPER FITTINGS NIPPLES & FITTINGS Tee C x C x C WT Part# Nominal 1 x 2 x 3 pprox Net Wt. Ind # /8" 0.02 W /4" 0.03 W /8" 0.05 W /2" 0.08 W /2"x1/2"x1" - W /8" - W /4" 0.18 W /4"x3/4"x1" 0.25 W /4" x 3/4" x 1/2" 0.15 W /4" x 1/2" x 3/4" 0.19 W /4"x1/2"x1/2" 0.15 W " 0.35 W "x1"x 1-1/4" 0.64 W "x1"x3/4" 0.29 W "x1"x1/2" 0.24 W "x3/4"x1" 0.38 W "x3/4"x3/4" 0.31 W "x3/4"x1/2" 0.27 W "x1/2"x1" 0.34 W "x1/2"x3/4" 0.34 W /4" 0.58 W /4" x1-1/4" x 1-1/2" 0.79 W /4"x1-1/4"x1" 0.47 W /4" x 1-1/4" x 3/4" 0.39 W /4"x1-1/4"x1/2" 0.33 W /4" x 1"x 1-1/4" - W /4" x 1"x1" 0.50 W /4" x 3/4" x 1-1/4" 0.63 W /4"x3/4"x3/4" - W /4"x 1/2" x 1-1/4" - W /2" - W /2"x1-1/2"x 1-1/4" - W /2" x 1-1/2" x1" - W /2" x 1-1/2" x 3/4" 0.51 W /2" x 1-1/2" x 1/2" 0.46 W " 1.35 W " x 2" x 1-1/2" 1.17 W " x 2" x 1-1/4" 1.01 W "x2"x1" 0.99 W " x 2" x 3/4" 0.90 W "x2"x1/2" 0.77 W " x 1-1/2" x 3/4" 1.40 W " x 1-1/4" x 1-1/4" 1.14 W "x1"x2" 1.34 W "x1"x1" 0.98 W /2" 2.21 W "x 3" x 2" 2.53 W " x 3" x 1-1/4" 2.18 W "x3"x1" 2.14 W Phone:

251 PLSTIC FITTINGS PVC SCHEDULE 80 FITTINGS Machined Schedule 80 PVC nipples comply fully with STM D2464, threads conform to STM F1498, and the pipe is extruded from PVC meeting STM D1784 and meets STM D1785, products standard /2" DIMETER Part # Length X Close (1-1/8") /2" " /2" " /2" " /2" " /2" " " " " " /4" DIMETER Part # Length X Close (1-3/8") /2" " /2" " /2" " /2" " /2" " " " " DIMETER Part # Length X Close (1-1/2") " /2" " /2" " /2" " /2" " " " /4" DIMETER Part # Length X Close (1-5/8") " /2" " /2" " /2" " /2" " /2" DIMETER Part # Length X Close (1-5/8") " /2" " /2" " /2" " /2" " " DIMETER Part # Length X Close (2") /2" " /2" " /2" " /2" " " " More sizes available...just ask! I joined a health club last year, spent about 400 bucks. Haven't lost a pound. pparently you have to go there. PLSTIC FITTINGS Fax: sales@global-hose.com 251

252 PVC SCHEDULE 40 FITTINGS SLIP TEES PLSTIC FITTINGS SLIP X FEMLE DPTER PLSTIC FITTINGS Part # Size /2" /4" /4" x 3/4" x 1/2" " " x 1" x 1/2" " x 1" x 3/4" /4" /2" " /2" SLIP COUPLING Part # Size /2" /2" x 1/4" /2" x 3/8" /4" " /4" /2" " /2" " 7.50 MIP X DPTER Part # Size /2" /4" " /4" /2" " /2" " 6.94 THREDED COUPLING Part # Size /2" /4" " /4" /2" " /2" " SLIP ELOW Part # Size /2" /4" 1.30 History is the version of past events that people have decided to agree upon. - Napoleon onaparte Part # Size /2" /4" " /4' " /2" " Phone:

253 PLSTIC FITTINGS SLIP CP PVC SCHEDULE 40 FITTINGS 45 SLIP ELOW Part # Size /2" /4" " /4' /2" " /2" " 6.02 THREDED PIPE CP Part # Size /2" /4" " /4' /2" " /2" " SLIP USHING Part # Size /2" /4" 1.23 SLIP X FIP USHING Part # Size /2" x 1/4" /2" x 3/8" /4" x 1/2" " x 1/2" " x 3/4" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" /2" x 1-1/2" /2" x 2" " x 2" " x 2-1/2" 5.94 Part # Size /4" x 1/2" " x 1/2" " x 3/4" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" /2" x 1-1/2" /2" x 2" " x 2" " x 2-1/2" 5.94 Never put off until tomorrow, what you can put off until the day after tomorrow. - Mark Twain PLSTIC FITTINGS Fax: sales@global-hose.com 253

254 PVC SCHEDULE 80 FITTINGS PLSTIC FITTINGS PVC Material is Type 1 according to the merican Society for Testing Materials (STM) D Fittings conform to STM D-2464 & STM D Temperature rating is 140 F. PSI is based on water at 73 F. Derate 50% at 110 F and 78% at 140 F. Not recommended for use in compressed air or gas systems. PLSTIC FITTINGS SLIP X SLIP 90 ELOW Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " " FIP X FIP 90 ELOW Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " SLIP X SLIP TEE Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " " FIP X FIP TEE Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " SLIP X SLIP 45 ELOW Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " " Phone: SLIP X SLIP COUPLING Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " "

255 PLSTIC FITTINGS PVC SCHEDULE 80 FITTINGS FIP X FIP COUPLING Part # Size /4" /8" /2" /4" " /4" /2" " " " SLIP X SLIP REDUCING COUPLING Part # Size /4" x 1/2" " x 1/2" " x 3/4" /4" x 1" /2" x /2" x 1-1/4" x 1-1/2" " x 2" " x 3" " x 4" FIP X FIP REDUCING COUPLING Part # Size /8" x 1/4" /2" x 3/8" /4" x 1/2" " x 1/2" " x 3/4" /4" x 3/4" /4" x 1" /2" x 1" /2" x 1-1/4" " x 1-1/2" MIP X SLIP DPTER Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " MIP X FIP USHING Part # Size /4" x 1/8" /8" x 1/8" /8" x 1/4" /2" x 1/4" /2" x 3/8" /4" x 3/8" /4" x 1/2" " x 1/2" " x 3/4" /4" x 1/2" /4" x 3/4" /4" x 1" /2" x 1/2" /2" x 3/4" /2" x 1" /2" x 1-1/4" " x 1/2" " x 3/4" " x 1" " x 1-1/4" " x 1-1/2" " x 2" " x 2" " x 3" PLSTIC FITTINGS Fax: sales@global-hose.com 255

256 PVC SCHEDULE 80 FITTINGS PLSTIC FITTINGS PLSTIC FITTINGS SLIP X SLIP UNION Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " FIP X FIP THREDED UNION Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " MIP THREDED PLUG Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " SLIP CP Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " " FIP THREDED CP Part # Size /4" /8" /2" /4" " /4" /2" " /2" " " Phone:

257 PLSTIC FITTINGS VILLE IN THREE TYPES OF PLSTIC PLSTIC PIPE dd ( ) letter for type of plastic required (W) White Nylon- made from virgin grade formulated to resist physical stress and abrasion. This material meets F.D.. requirements of Code of Federal Regulation part and is therefore suitable for food contact surfaces. Temperature Range: F to F Working Pressure: 125 PSI maximum. HEX HED PLUGS () lack Polyethylene- made from a high molecular weight linear polyethylene formulated for chemical compatibility and high impact resistance at lower temeratures. Polyethylene is NSF approved for potable water. Temperature Range: F to F Working Pressure: 125 PSI maximum. HEX NIPPLES (P) Polypropylene- made from the finest polypropylene resins. Polypropylene is used for its resistance to a wide range of chemicals. Working pressures decrease as temperatures increase. NSF-approved materials FD-approved materials Note: Do not use with compressed air or gas. HEX USHINGS Part # Size P W /8" /4" /8" /2" /4" " /4" /2" " 4.39 PIPE CP Part # Size W /4" /8" /2" /4" 0.89 Fax: Part # Size P W /8" /4" /8" /2" /4" " /4 " 3.86 REDUCER NIPPLES Part # Size P W /4 x 1/8" /8 x 1/8" /8 x 1/4" /2" x 1/8" /2 x 1/4" /2 x 3/8" /4 x 3/8" /4 x 1/2" x 3/4" /4 x 3/4" x 1-1/4" x 2" More shapes and sizes available Part # Size P W /4 x 1/8" /8 x 1/8" /8 x 1/4" /2 x 1/4" /2 x 3/8" /4 x 1/8" /4 x 1/4" /4 x 3/8" /4 x 1/2" x 1/2" x 3/4" /4 x 3/4" /4 x 1" /2 x 3/4" /2 x 1" /2 x 1-1/4" x 3/4" x 1" x 1-1/2" 5.43 LL HOSE R "Y" Part # Size P* W * 1/4" * 3/8" * 1/2" 6.59 *Natural Polypro sales@global-hose.com 257

258 PLSTIC PIPE ELOW COUPLING PLSTIC FITTINGS HOSE R X FEMLE DPTERS PLSTIC FITTINGS 258 Part # Size P W /4" /8" /2" /4" " /4" /2" STREET ELOW Part # Size P W /4" /8" /2" /4" " /4" TEE Part # Size P W /4" /8" /2" /4" " /4" /2" More shapes and sizes available Phone: Part # Size P W /8" /4" /8" /2" /4" " /2" " 9.36 MLE DPTERS Hose ID x FIP Part # Size P W /4 x 1/4" /8 x 1/4" /8 x 3/8" /8 x 1/2" /2 x 3/8" /2 x 1/2" /8 x 3/4" /4 x 1/2" /4 x 3/4" 2.45 Hose ID x MIP Part # Size P W /16 x 1/8" /16 x 1/4" /4 x 1/8" /4 x 1/4" /4 x 3/8" /4 x 1/2" /4 x 3/4" /16 x 1/8" /16 x 1/4" /16 x 3/8" /8 X 1/8" /8 x 1/4" /8 x 3/8" /8 x 1/2" /8 x 3/4" /2 x 1/4" /2 x 3/8" /2 x 1/2" /2 x 3/4" /8 x 3/8" /8 x 1/2" /8 x 3/4" /4 x 1/2" /4 x 3/4" /4 x 1" x 3/4" x 1" x 1-1/4" /4 x 1" /4 x 1-1/4" /4 x 1-1/2" /2 x 1-1/2" x 2"

259 PLSTIC FITTINGS HOSE R DPTERS -CONTINUED- ELOWS UNION UNION ELOWS PLSTIC PIPE TEES RED ON LL SIDES Hose ID x Male Pipe Part # Size P W /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /16 x 3/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ /8 x 3/ /4 x 1/ /4 x 3/ /4 x x3/ x x 1-1/ /4 x 1-1/ /2 x 1-1/ x HOSE R X FEMLE ELOW Hose ID x Female Pipe Part # Size W /2 x 3/ /2 x 3/ /4 x 3/ Fax: Part # Size P W / / / / / / / REDUCING REDUCING UNION UNION ELOWS ELOWS Part # Size W /2 X 1/ SPLICERS Part # Size P W / / / / / / / / / / REDUCER REDUCER CONNECTORS CONNECTORS Part # Size W /8 x 1/ /2 x 1/ /2 x 3/ /8 x 3/ /8 x 1/ Part # Size P W / / * 3/ / / / / / / / / / * single barb REDUCING TEES Part # Size 3 x 1 x 2 W * 1/8 x 5/32 x 5/ /4 x 3/8 x 3/ /4 x 1/2 x 1/ /8 x 1/2 x 1/ /8 x 5/8 x 5/ /2 x 3/8 x 3/ /2 x 1/2 x 5/ /2 x 3/4 x 3/ * single barb TEES 1 2 Part # Size 1 & 2 X 3 W /4 x 1/ /8 x 1/ /8 x 3/ /2 x 1/ /2 x 3/ /2 x 1/ /4 x 3/ More sizes available...just ask! sales@global-hose.com 259 PLSTIC FITTINGS

260 PLSTIC GRDEN HOSE & COMPRESSION PLSTIC GRDEN HOSE FITTINGS FITTINGS WITH GRDEN HOSE THRED GRDEN HOSE CP White Nylon Part # Size P 3/4" 1.07 MLE GRDEN HOSE X FEMLE PIPE White Nylon Part # Size MGH X 1/2 FIP 3.23 PLSTIC FITTINGS PLSTIC COMPRESSION FIT- TINGS Corrosion resistant thermoresins designed to resist vibration, provide good electrical insulation, low flow resistance, and resistance to scale buildup. dd letter to the end of part no. to denote the type you prefer. N = Nylon P = Polypropylene Standard nut and sleeves will be provided (sleeve is integral part of nut). Other sizes available upon request. GRDEN HOSE NUT White Nylon FEMLE GRDEN HOSE X MLE PIPE UNION && REDUCING UNION UNION CON- CONNECTORS NECTORS PLSTIC FITTINGS Part # Size /4" 0.85 GRDEN HOSE DPTER INSERTS White Nylon White Nylon Part # Size FGH X 3/4 MPT 3.43 FEMLE GRDEN HOSE X FEMLE PIPE Part # Size P N /4" /16" /16" x 1/4" /8" /8" x 1/4" /2" /2" x 3/8" 6.00 ULKHED UNIONS Part # Size /8" /2" /8" /4" 0.70 White Nylon Part # Size FGH X 1/2 FIP 2.96 Part # Size N 1/4" N 3/8" N 1/2" 8.59 UNION TEES GRDEN HOSE THRED DPTERS DPTERS GRDEN TO PIPE THRED White Nylon Part # Size P N /4" /8" /2" White Nylon UNION ELOWS Part # Size /2" /8" 1.18 More sizes available Part # Size GHT X 3/8 MPT GHT X 1/2 MPT GHT X 3/4 MPT 1.27 Part # Size P N /4" /8" /2" 8.38 Phone:

261 PLSTIC FITTINGS PLSTIC COMPRESSION FEMLE CONNECTORS FEMLE ELOWS nd then the fight started... 1) My wife sat down on the couch next to me as I was flipping channels. Part # Tube x Female Pipe P N /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ MLE CONNECTORS Part # Tube x Female Pipe P N /4 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ MLE RUN TEES She asked, "What's on TV?" I said, "Dust." nd then the fight started... 2) My wife and I are watching "Who Wants To e Millionaire" while we were in bed. I turned to her and said, "Do you want to have sex?" "No," she answered. I then said, "Is that your final answer?" She didn't even look at me this time, simply saying, "Yes." So I said, "Then I'd like to phone a friend." Part # Tube x Male Pipe P N /8 x 1/ /4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x 3/ /8 x 1/ /2 x 1/ /2 x 3/ /2 x 1/ Part # Tube x Male Pipe P /8 x 1/ /2 x 1/ MLE RNCH TEES nd then the fight started... 3) Saturday morning I got up early, quickly dressed, made my lunch, grabbed the dog, and slipped quietly into the garage. I hooked up the boat to the truck and proceeded to back out into a torrential downpour. The wind was blowing 50 mph, so I pulled back into the garage, turned on the radio and discovered that the weather would be bad all day. I went back into the house, quietly undessed, and slipped back into bed. I cuddled up to my wife's back, now with a different anticipation, and whispered, "The weather out there is terrible." PLSTIC FITTINGS MLE ELOWS Part # Tube x Male Pipe P N /4 x 1/ /4 x 1/ /4 x 3/ /16 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ /2 x 1/ Part # Tube x Male Pipe P N /4 x 1/ /4 x 1/ /8 x 1/ /8 x 3/ /2 x 3/ My loving wife of 10 years replied, "Can you believe my stupid husband is out fishing in that?" nd then the fight started... Fax: sales@global-hose.com 261

262 PLSTIC PUSH-IN PLSTIC FITTINGS PLSTIC PUSH-IN TUE FITTINGS PLSTIC FITTINGS odies: Fitting Working Specifications O Rings: Collet: Operating Temperature 33 0 F to F ( 1 0 C to 60 0 C ) Operating Pressure ir: lbs. psi. Liquid: lbs. psi. Suitable for Vacuum Material Specifications Food Grade, cetal Copolymer or Polypropylene Food Grade Nitrile Rubber or EPDM Food Grade cetal Copolymer, stainless steel teeth ISO 9001 NSF Fitting Tube Types Plastic Tube: Polyethylene, nylon, polyurethane (for soft tubing or thin wall tube, tube supports are recommended). raided Tube: For raided Tube, the use of Tube to Hose Stems and Elbows is required. To retain braided tube on barbs, the use of clamps is also recommended. lso available in metric sizes. Call order desk for details MLE REDUCING UNION CONNECTOR UNION CONNECTOR REDUCING UNION Part # Tube OD Thread NPTF P 5/32" 1/8" P 5/32" 1/4" P 3/16" 1/8" P 1/4" 1/8" P 1/4" 1/4" P 5/16" 1/4" P 1/4" 3/8" P 5/16" 3/8" P 3/8" 1/8" P 3/8" 1/4" P 3/8" 3/8" P 3/8" 1/2" P 1/2" 3/8" P 1/2" 1/2" 7.96 More sizes available upon request Doc, I can't stop singing 'The Green, Green Grass of Home.' That sounds like Tom Jones Syndrome. Is it common? Well, It's Not Unusual. Part # Tube OD P 5/32" P 3/16" P 1/4" P 5/16" P 3/8" P 1/2" 6.04 CROSS Part # Tube OD P 3/8" Part # Tube OD Tube OD P 1/4" 3/16" P 5/16" 5/32" P 5/16" 3/16" P 5/16" 1/4" P 3/8" 3/16" P 3/8" 1/4" P 3/8" 5/16" P 1/2" 5/16" P 1/2" 3/8" 8.23 UNION ELOW Part # Tube OD P 5/32" P 3/16" P 1/4" P 5/16" P 3/8" P 1/2" Phone:

263 PLSTIC FITTINGS PLSTIC PUSH-IN REDUCING ELOW daptability Products can be coupled together to form new, intergral fittings. UNION TEE Part # Tube OD Tube OD P 5/16" 5/32" P 5/16" 3/16" P 5/16" 1/4" P 3/8" 3/16" P 3/8" 1/4" P 3/8" 5/16" P 1/2" 3/8" FIXED ELOW Use to get reducing swivel sizes you need! STEM DPTER Part # Tube OD P 5/32" P 3/16" P 1/4" P 5/16" P 3/8" P 1/2" 8.51 REDUCING RNCH TEE TEE Part # Tube OD Thread NPTF P 1/4" 1/8" P 1/4" 1/4" P 1/4" 3/8" P 3/8" 1/4" P 3/8" 3/8" 8.66 PLUG-IN ELOW Part # Stem OD Tube OD P 5/32" 5/32" P 3/16" 3/16" P 1/4" 1/4" P 5/16" 5/16" P 3/8" 3/16" P 3/8" 1/4" P 3/8" 5/16" P 3/8" 3/8" P 1/2" 1/2" More sizes available upon request n invisible man marries an invisible woman. The kids were nothing to look at either. Part # Stem OD Thread NPTF P 5/32" 1/8" P 5/32" 1/4" P 3/16" 1/8" P 1/4" 1/8" P 5/16" 1/8" P 1/4" 1/4" P 5/16" 1/4" P 5/16" 3/8" P 3/8" 1/4" P 3/8" 3/8" P 1/2" 3/8" P 1/2" 1/2" 4.65 REDUCER Part # Stem OD Tube OD P 5/16" 3/16" P 5/16" 1/4" P 3/8" 3/16" P 3/8" 1/4" P 3/8" 5/16" P 1/2" 5/16" P 1/2" 3/8" Part # Tube OD Ends Tube OD ranch ULKHED UNION FEMLE CONNECTOR P 1/2" 3/8" P 3/8" 1/4" Part # Tube OD P 5/32" P 3/16" P 1/4" P 5/16" P 3/8" P 1/2" Part # Tube OD Thread NPTF P 1/4" 1/8" P 1/4" 1/4" P 3/8" 1/8" P 3/8" 1/4" 8.42 PLSTIC FITTINGS Fax: sales@global-hose.com 263

264 PLSTIC PLSTIC PUSH-IN FITTINGS 2-WY DIVIDER Part # Tube OD P 5/16" P 3/8" 9.04 TUE TO HOSE STEM PLSTIC FITTINGS PolyPropylene push-in shut off valves for potable water Technical Specifications Operating Pressure: 0 to 150 psi ( 0 to 10 bar) Operating Temp. ( water ): 33 0 F to F ( +1 0 C to 65 0 C) Materials ody - Food grade Polypropylene Collet - Food grade Polypropylene with stainless steel teeth O-Ring - EPDM PLSTIC FITTINGS Part # Stem OD Hose OD P 1/4" 3/16" P 1/4" 1/4" P 5/16" 5/16" P 1/4" 5/16" P 5/16" 3/16" P 5/16" 1/4" P 5/16" 3/8" P 3/8" 1/4" P 3/8" 5/16" P 3/8" 3/8" P 3/8" 1/2" P 1/2" 3/8" P 1/2" 1/2" 7.48 PLUG Tube Tolerances Shut-off Valves are intended for use with potable water. The Valves are not for use with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. PL X PL Part # Tube OD P 1/4" P 3/8" CHECK VLVE Part # Tube OD P 3/8" nd then the fight started... 1) My wife sat down on the couch next to me as I was flipping channels. Part # Stem OD P 5/32" P 3/16" P 1/4" P 5/16" P 3/8" P 1/2" 3.44 TUE SUPPORT PL PL X MLE NPTF Part # Tube OD Thread NPTF P 1/4" 1/4" P 3/8" 3/8" She asked, "What's on TV?" I said, "Dust." nd then the fight started... 2) My wife and I are watching "Who Wants To e Millionaire" while we were in bed. I turned to her and said, "Do you want to have sex?" "No," she answered. I then said, "Is that your final answer?" She didn't even look at me this time, simply saying, "Yes." Part # Tube OD Tube ID P 5/16" 1/4" P 3/8" 5/16" P 1/2" 3/8" 0.69 So I said, "Then I'd like to phone a friend." nd then the fight started Phone:

265 HOSE CCESSORIES RONZE INSERT FITTINGS 150 PSI Genuine red brass - for plastic pipe HEX MLE DPTERS ( arb x Male Pipe ) Part # arb x Male " x 1" " x 1-1/4" /4" x 1-1/4" /4" x 1" /2" x 1-1/2" " x 2" RONZE TEES LL R STEEL INSERT FITTINGS FOR PLSTIC PIPE MLE DPTER ( R X MLE PIPE ) Part # Size ox/ Case /2" 25/ /4" 25/ " 16/ /4" 12/ /2" 6/ " 5/ /2" 1/ " 1/ " 1/ REDUCING DPTER R FITTINGS FOR PLSTIC PIPE 3) Saturday morning I got up early, quickly dressed, made my lunch, grabbed the dog, and slipped quietly into the garage. I hooked up the boat to the truck and proceeded to back out into a torrential downpour. The wind was blowing 50 mph, so I pulled back into the garage, turned on the radio and discovered that the weather would be bad all day. I went back into the house, quietly undessed, and slipped back into bed. I cuddled up to my wife's back, now with a different anticipation, and whispered, "The weather out there is terrible." My loving wife of 10 years replied, "Can you believe my stupid husband is out fishing in that?" nd then the fight started... Part # Size /4" " /4" ELOWS ( INSERT X NPT ) Part # Size /4 x 1/ x 3/ /4 x /2 x 1-1/ COUPLINGS 4) I rear-ended a car this morning. So, there we were alongside the road and slowly the other driver got out of his car. You know how sometimes you just get soooo stressed and little things just seem funny? Yeah, well I couldn't believe it... He was a DWRF!!! He stormed over to my car, looked up at me, and shouted, "I M NOT HPPY!!!" ( R X MLE PIPE ) Part # Size /4" x 3/4" " x 3/4" " x 1" ELOWS Part # Size ox/case /2 30/ /4 20/ / /4 16/ /2 12/ / So, I looked down at him and said, "Well then, that leaves six possibilities. Which one are you?" nd then the fight started... 5) My wife was hinting about what she wanted for our upcoming anniversary. She said, "I want something shiny that goes from 0 to 150 in about 3 seconds." ( arb x arb ) Part # Hose Size /4" " /4" x 1" /4" /2" I bought her a scale. nd then the fight started... 6) When I got home last night, my wife demanded that I take her someplace > expensive... So, I took her to a gas station. nd then the fight started... Fax: sales@global-hose.com 265

266 COMINTION (KING) NIPPLES HOSE CCESSORIES STEEL HOSE NIPPLES NEW RSS MENDERS STEEL HOSE MENDERS ( arb x Male Pipe ) Part # Hose Size /2" /4" " /4" /2" " /2" " " Part # Size /2" /4" " /4" /2" " /2" " Part # Hose Size /2" /4" " /4" /2" " PLTED STEEL MENDER PLTED STEEL LUMINUM NEW NEW NEW NEW NEW NEW Part # Size /2" /4" " /4" /2" " /2" " " " " " Part # Size /2" /4" " /4" /2" " /2" " " Part # Size /8" /2" /4" " /4" /2" " /2" " " STINLESS STEEL HOSE MENDER NEW HOSE CCESSORIES 266 NEW 316 STINLESS STEEL Part # Size /2" /4" " /4" /2" " /2" " " Phone: Part # Size /2" /4" " /4" /2" " NEW RSS HOSE MENDER Part # Size /4" " /4" /2" "

267 HOSE CCESSORIES CM & GROOVE TYPE TYPE TYPE C TYPE D luminum Type C D Size Part# Part# Part# Part# 3/4" " /4" /2" " /2" " " Stainless Steel Type C D Size Part# Part# Part# Part# 3/4" " /4" /2" " /2" " " TYPE E TYPE F TYPE DC TYPE DP luminum Type E F DC DP Size Part# Part# Part# Part# 3/4" " /4" /2" " /2" " " Stainless Steel Type E F DC DP Size Part# Part# Part# Part# 3/4" " /4" /2" " /2" " " HOSE CCESSORIES Fax: sales@global-hose.com 267

268 CM & GROOVE HOSE CCESSORIES TYPE TYPE TYPE C TYPE D RSS Type C D Size Part# Part# Part# Part# 3/4" " /4" /2" " /2" " POLYPROPLYENE Type C D Size Part# Part# Part# Part# 1/2" /4" " /4" /2" " " " HOSE CCESSORIES TYPE E TYPE F TYPE DC TYPE DP RSS Type E F DC DP Size Part# Part# Part# Part# 3/4" " /4" /2" " /2" " " POLYPROPLYENE Type E F DC DP Size Part# Part# Part# Part# 3/4" " /4" /2" " /2" " " Phone:

269 HOSE CCESSORIES MLE NPT ENDS UNIVERSL COUPLINGS HOSE END * Safety clip included Part # Size /8" /2" /4" " 6.38 * Safety clip included Part # Size /8" /2" /4" " 6.43 WSHER TRIPLE CONNECTIONS Part # FEMLE NPT ENDS Part # * Safety clip included Part # Size /8" /2" /4" " 6.38 "Neither man nor woman can be worth anything until they have discovered that they are fools. This is the first step toward becoming either estimable or agreeable; and until it is taken there is no hope." William Lamb, 2nd Viscount Melbourne HOSE CCESSORIES Fax: sales@global-hose.com 269

270 GROUND JOINT COUPLING For high pressure air and water service, steam, sanitary, high pressure spray, LPG and anhydrous ammonia service, petroleum products and chemicals: ll parts plated malleable iron. Insert and spud may be either steel or malleable iron. NPT Male and Female spud. Female wing nut-to-spud connection is NPSM ground joint. HEVY DUTY COUPLINGS - Ground Joint Type, Plated Hose Stem with HOSE CCESSORIES Wing Nut & Female Spud Hose Stem Only Wing Nut Only Female Spud Only Part # Size /2" /4" " /4" /2" " /2" " " Part # Size /2" /4" " /4" /2" " /2" " " Part # Size /2" " /4" /2" " /2" " " Part # Size /2" /4" " /4" /2" " /2" " " Male Pipe Stem Only (NPT) Part # Size /2" /4" " /4" /2" " /2" " " , 4, 6 olt Clamps Part # Size /4" " /2" " " HOSE CCESSORIES Danger: Failure or improper selection or improper use of hose couplings or related accessories can cause death, personal injury and property damage. Possible consequences of failure or improper selection or improper use of hose couplings or related accessories include but are not limited to: Coupling or parts thrown off at high speed. High velocity fluid discharge. Explosion or burning of the conveyed fluid. Contact with suddenly moving or falling objects that are to be held in position or moved by the conveyor fluid. Dangerously whipping hose. Contact with conveyed fluids that may be hot, cold, toxic or otherwise injurious. Sparking or explosion while paint or flammable liquid spraying. efore selecting or using any of our products, it is important to check with our offices for more detailed specifications regarding use. 270 Phone:

271 FIRE HOSE FITTINGS HOSE CCESSORIES HYDRNT DPTERS - RSS FEMLE X MLE Part # Description /2" NST x 3/4" GHT /2" NST x 3/4" GHT /2" NST x 3/4" NPT /2" NST x 1" NPSH /2" NST x 1" NPT /2" NST x 1-1/2" NPSH /2" NST x 1-1/2" NPT /2" NST x 2" NPSH /2" NST x 2" NPT /2" NST x 1-1/2" NST " NPSH x 2-1/2" NST " NST x 2-1/2" NST FEMLE TO MLE HEX DPTER - RSS FEMLE X MLE Part # Description /2" NST x 1-1/2" NPSH /2" NPT x 1-1/2" NPSH /2" NST x 2-1/2" NPSH /2" NPT x 2-1/2" NPSH /2" NPSH x 1-1/2" NST /2" NST x 1-1/2" NPT /2" NST x 2-1/2" NPT DOULE MLE HEX NIPPLE - RSS Part # Description /2" NPT x 1-1/2" NPSH /2" NPT x 2-1/2" NPSH /2" NPT x 1-1/2" NST " NPT x 2-1/2" NST /2" NPT x 2-1/2" NST " NPT x 2-1/2" NST DOULE FEMLE SWIVEL - RSS Part # Description /2" NPT x 1-1/2" NPSH /2" NPT x 2-1/2" NPSH /2" NPT x 1-1/2" NST " NPT x 2-1/2" NST /2" NPT x 2-1/2" NST " NPT x 2-1/2" NST HOSE CCESSORIES Fax: sales@global-hose.com 271

272 FIRE HOSE FITTINGS HOSE CCESSORIES MLE SWIVEL DPTER - RSS Part # Description Female x Male /2" NST x 1-1/2" NPT /2" NST x 2" NPT /2" NST x 2-1/2" NPT /2" NST x 3" NPT FEMLE SWIVEL DPTER - RSS Part # Description /2" NST x 2-1/2" NPT /2" NST x 3" NPT DOULE MLE - RSS Part # Description /2" NPSH x 1-1/2" NPSH /2" NPSH x 2-1/2" NPSH /2" NST x 1-1/2" NST /2" NST x 2-1/2" NST CP - RSS HOSE CCESSORIES PLUG ND CHIN - RSS Part # Description /2" NPSH /2" NST /2" NST Part # Description /2" NST /2" NST Phone:

273 HOSE CLMPS 600 Series 5/16" Slotted Carbon Steel Screw 1/2" Wide 201 Stainless Steel and Carbon Steel Housing 1/2 ND CLMPS pplications: general purpose clamp for automobiles, plumbing, home and garden general clamping applications, with anti-corrosive properties varying with the number of components made from stainless steel. METL HOSE CLMPS 611 Series 5/16" Slotted Carbon Steel Screw 1/2" Wide 201 Stainless Steel and 301 Stainless Steel Housing HS H HF 015 Dia. Range Part # Part # # Min. Max. 6 3/8" 7/8" /16" 1" /16" 1-1/16" /16" 1-1/4" /16" 1-1/2" /4" 1-3/4" /16" 2" /16" 2-1/4" /16" 2-1/2" /16" 2-3/4" /16" 3" /16" 3-1/4" /16" 3-1/2" /16" 3-3/4" /16" 4" /16" 4-1/4" /2" 4-1/2" " 5" /2" 5-1/2" " 6" /2" 6-1/2" " 7" /4" 7-3/4" /2" 8-1/2" " 10" /4" 10-3/4" /4" 11-1/4" /16" 12-1/4" " 13" /4" 13-3/4" /2" 14-1/2" /4" 16" /8" 17-3/8" " 20" /8" 21-1/4" /8" 24-7/8" CLMPS Fax: sales@global-hose.com 273

274 METL HOSE CLMPS HSS HF-SS 035 HS-X 1/2 ND CLMPS Use for marine, underground and other high corrosive applications. 620 Series 5/16" Slotted 305 Stainless Steel Screw 1/2" Wide 301 Stainless Steel and 301 Stainless Steel Housing HOSE CLMPS CLMPS Dia. Range Part # # Min. Max. 6 3/8" 7/8" /16" 1" /16" 1-1/16" /16" 1-1/4" /16" 1-1/2" /4" 1-3/4" /16" 2" /16" 2-1/4" /16" 2-1/2" /16" 2-3/4" /16" 3" /16" 3-1/4" /16" 3-1/2" /16" 3-3/4" /16" 4" /16" 4-1/4" /2" 4-1/2" " 5" /2" 5-1/2" " 6" /2" 6-1/2" " 7" /4" 7-3/4" /2" 8-1/2" " 10" /4" 10-3/4" /4" 11-1/4" /16" 12-1/4" " 13" /4" 13-3/4" /2" 14-1/2" /4" 16" /8" 17-3/8" " 20" /8" 21-1/4" /8" 24-7/8" Phone:

275 HOSE CLMPS METL HOSE CLMPS MINITURE CLMPS - 5/16 ND pplications: For marine, agricultural, industrial and automotive uses. Corrosion resistance varies with stainless components. Mechanically interlocked, 3 piece construction for service sealing pressure without spot welding P MHX 35 MH MF 300 Series 1/4" Slotted Carbon Steel Screw 5/16" Wide 301 Stainless Steel and Carbon Steel Housing Dia. Range Part # Min. Max. 7/32" 5/8" /16" 11/16" /16" 7/8" /16" 1" /2" 1-1/16" /16" 1-1/4" /16" 1-1/2" /8" 1-3/4" Series 1/4" Slotted Carbon Steel Screw 5/16" Wide 301 Stainless Steel and 301 Stainless Steel Housing Dia. Range Part # Min. Max. 7/32" 5/8" /16" 11/16" /16" 7/8" /16" 1" /2" 1-1/16" /16" 1-1/4" /16" 1-1/2" /8" 1-3/4" CLMPS 350 Series 1/4" Slotted 410 Stainless Steel Screw 5/16" Wide 301 Stainless Steel and 301 stainless Steel Housing Dia. Range Part # Min. Max. 7/32" 5/8" /16" 11/16" /16" 7/8" /16" 1" /2" 1-1/16" /16" 1-1/4" /16" 1-1/2" /8" 1-3/4" Fax: sales@global-hose.com 275

276 METL HOSE CLMPS QUICK RELESE 500/550 SERIES HOSE CLMPS These clamps feature a unique quick release design between the one piece housing and band allowing for quick and easy installation in restricted or difficult areas. pplications: Quick release action permits easy installation in applications where clamp must be opened to be applied. Quick release clamps are used extensively in the telecommunications industry on cable enclosures where open air application demands durability. Open/Close design allows easy installation. CLMPS 56 LS 500 Series 5/16" Slotted Carbon Steel Screw 1/2" 301 Stainless Steel band 301 Stainless Steel Housing 410 Stainless Steel ridge 550 Series 5/16" Slotted 410 Stainless Steel Screw 1/2" 301 Stainless Steel band 301 Stainless Steel Housing 410 Stainless Steel ridge Dia. Range Part # Part # # Min. Max. 12 1/2" 1-1/4" /4" 1-3/4" " 2-1/4" " 2-3/4" /2" 3-1/2" " 4" " 5" /16" 6" /4" 7" /4" 8-9/16" " 10" /16" 12-5/16" /16" 14" /4" 16" /4" 18" " 20" KIT# LIST KIT# LIST KIT# LIST HOSE CLMP KITS DISPLY RCK DISPLY RCK NEW Qty Part# KIT# LIST Qty Part# LSS Qty Part# KIT# LIST Qty Part# Qty Part# KIT# LIST Qty Part# Phone:

277 HOSE CLMPS WORM GER HOSE CLMPS 830 Series ECONOMY WORM GER CLMPS.64(16.3)MX.42(10.7)MX 0.40(10.2) 1.10(27.9)MX.75(19.1)MX.60(15.2)MX.33(8.4)REF 1/4"(6.4).45(11.4) 5/16"(8.0) Head Clamp Diameter Clamp Diameter MINI CLMP Screw: 1/4 hex-head and: 5/16 wide.312(7.92) Interlock Construction No welds, no bumps, which strengthens under tension to ensure maximum torque application..50(12.7) REGULR CLMP Screw: 5/16 hex-head and: 1/2 wide Diameter Range Use for General Industrial pplication Inch MM ll Galvanized Steel 400 Series Stainless Steel and, No. Housing and Screw Min-Max Min-Max Part # Part # Mini Clamp with 8 mm wide and (5/16") 4 7/32"-5/8" S /16"-3/4" S /2"-7/8" S 0.77 Regular Clamp with 12.7 mm (1/2") wide and 10 9/16"-1-1/16" S /16"-1-1/4" S /16"-1-1/2" S /16"-1-3/4" S /16"-2" S /16"-2-1/4" S /16"-2-1/2" S /16"-2 3/4" S /16"-3" S /16"-3-1/4" S /16"-3-3/4" S /16"-3-3/4" S /16"-4" S /16"-4-1/4" S /16"-4-1/2" S /8"-5" S /8"-5-1/2" S /8"-6" S /8"-6-1/2" S 2.15 CLMPS Fax: sales@global-hose.com 277

278 OLT CLMPS ll designs meet SE J1508 specifications..025 and Thickness 3/4 Wide and and Material: 300 Series Stainless Steel olt Material: 300 Series Stainless Steel Nut Material: 300 Series Stainless Steel Nuts are Self-locking Torque Rating 75 in/lb Opens 1/16" above and tightens 1/8" smaller then nominal I.D. for a total of 3/16" range for clamps sizes 150 through 250. Opens 1/16" above and tightens 7/32" smaller then nominal I.D. for clamps sizes 256 through 750. T-olt Clamps T-OLT CLMPS Purpose: To provide a quick, yet effective means of clamping a variety of fittings to a wide range of hose. T-olts can be applied with a standard 7/16 socket wrench. They provide sealing surface by using a shoe or formed bridge. Services: The T-olt clamp is a high strength, reliable clamp with numerous applications in both the commercial and industrial markets including hose and ductwork connections for air, oil, water and other types of low pressure CLMPS Nominal Size O.D. Range Part# From: To: 1-1/4 1-5/32" 1-15/32" /2 1-3/8" 1-9/16" /4 1-5/8" 1-13/16" /8 1-3/4" 1-15/16" /8" 2-1/16" /4 2-1/8" 2-5/16" /8 2-1/4" 2-7/16" /2 2-3/8" 2-9/16" / /32" 2-5/8" /8 2-13/32" 2-11/16" /4 2-17/32" 2-13/16" /8 2-21/32" 2-15/16" /32" 3-1/16" /8 2-29/32" 3-3/16" /4 3-1/32" 3-5/16" /2 3-9/32" 3-9/16" /4 3-17/32" 3-13/16" / /32" 3-7/8" /32" 4-1/16" /4 4-1/32" 4-5/16" /2 4-9/32" 4-9/16" /4 4-17/32" 4-13/16" /32" 5-1/16" /4 5-1/32" 5-5/16" /2 5-9/32" 5-9/16" /4 5-17/32" 5-13/16" /32" 6-1/16" /4 6-1/32" 6-5/16" /2 6-9/32" 6-9/16" /4 6-17/32" 6-13/16" /32" 7-1/16" /2 7-9/32" 7-9/16" /32" 8-1/16" /4 8-9/32" 8-9/16" /8 8-21/32" 8-15/16" Phone:

279 HOSE CLMPS CRON STEEL 1-ER CLMPS 1-Ear Clamps are intended for low pressures applications such as automotive (not fuel lines), appliances, industrial machinery, underground irrigation systems and beverage dispensing equipment. They are specifically designed for mass production applications where inexpensive clamps are needed. Pressure: s a guideline, 1-Ear Clamps have held 30 bar psi. This was done using a static water pressure test. Material: Hot dipped galvanized carbon steel band - G90 Part # Ref# Nominal Inches Size Close Open /8" /16" /32" /2" /64" /16" /8" /16" /32" /4" /16" /8" /16" " /16" /8" /16" /16" /8" /32" /16" /8" /16" /32" /4" /16" /8" /16" " ER CLMPS ONE PIECE 1-ER CLMPS Smooth inner band surface protects hose other material when subjected to pulsation, expansion, or contraction. One piece design offers quick and easy installation. Used in places where clamping a second ear is impractical. For air and fluid media lines. Material: Zinc plated-steel SE 1008/1010 or DIN Stainless steel UNS S30400 or DIN STINLESS STEEL Part # Nominal Inches and Size Close Open Width /8" /64" /32" /16" /64" /4" /32" /16" /32" /8" /64" /32" /64" /16" /64" /32" /64" /2" /64" /64" /16" /8" /16" ) My wife and I were sitting at a table at my high school reunion and I kept staring at a drunken lady swigging her drink as she sat alone at a nearby table. My wife asked, "Do you know her?" CLMPS "Yes," I sighed, "she's my old girlfriend. I understand she took to drinking right after we split up those many years ago, and I hear she hasn't been sober since." "My God!" says my wife, "who would think a person could go on celebrating that long?" nd then the fight started... Fax: sales@global-hose.com 279

280 CLMPS ER CLMPS 2-ER CLMPS 2-Ear Clamps are especially suited for industrial use and with heavily vibrating equipment. This is a medium pressure clamp and is widely used for maintenace and OEM applications. Rubber hose, plastic tubing, coaxial and electrical cable, rope, etc. are all easily clamped. These clamps are installed on air, fluid, gas and steam lines. The one piece design offers a positive, tamper-proof seal without damaging the hose. PRESSURE: s a guideline, 2-Ear Clamps successfully seal at 54 bar psi with 35 pulsating strokes a minute. MTERIL: Zinc plated carbon steel SE 1008/1010 or DIN Stainless steel tubing UNS S30400 or DIN Note: When ordering your 2-Ear Clamps select nominal clamp size nearest to, but always larger than, O.D. of material to be clamped after insert has been fitted. ZINC PLTED CRON STEEL Part # Nominal Inches Size Close Open /16" /16" /8" /2" /16" /32" /8" /4" STINLESS STEEL Part # Nominal Inches Size Close Open /4" /16" /8" /2" /16" /32" /8" /4" /16" /8" /16" " /8" /16" /2" HOSE CLMPS GPLESS ER CLMPS Features ssured clamping seal For low durometer and/ or thin-walled hose/ tubing Perfect for silicon, vinyl, polyurethane or other high tech materials used in all industries. Once installed, smooth inner ban circumference prevents damage to the hose while the unique tongue-in-groove design provides a 360 seal There are no steps or gaps inside clamp Material - Stainless steel tubing UNS S30400 or DIN Part # Nominal and Inches Size Width Close Open /32" 5mm /8" 5mm /16" 5mm /2" 7mm /64" 7mm /16" 7mm /8" 7mm /16" 7mm /4" 7mm /16" 7mm PINCERS Model 1098 I Standard Jaw Pincers Part # SIDE JW PINCERS This dual purpose, side jaw design allows clamps to be applied or removed in confined areas with pincers held parallel to the hose. lso used like standard Pincers. Part # Model 1099 I Phone:

281 HOSE CLMPS F-CLMPS Open End Clamps are of the same general construction as the preformed clamps with this exception, the double wrapping of the band around the hose or article is part of the application. The open end clamps are used when one end or both, of the article to be clamped is not free, or an obstruction prevents slipping a preformed clamp over the end. Catalog Number OPEN END CLMPS (3/8 ND 5/8 (NOMINL) WIDTH) and Width & Thickness Clamp I.D. Inches Catalog Number and Width & Thickness FO-3 3/8 x /16 FOS-3 3/8 x FO-311 3/8 x /8 FOS-311 3/8 x FO-316 3/8 x FOS-316 3/8 x FO-325 3/8 x /8 FOS-325 3/8 x WITH STINLESS STEEL LOK FO-8 5/8 x FOS-8 5/8 x FO-10 5/8 x /2 FOS-10 5/8 x HEVY DUTY NDS FO-12 5/8 x FOS-12 5/8 x FO-14 5/8 x /2 FOS-14 5/8 x FO-16 5/8 x FOS-16 5/8 x FO-18 5/8 x /2 FOS-18 5/8 x FO-20 5/8 x FOS-20 5/8 x FO-24 5/8 x FOS-24 5/8 x FO-28 5/8 x FOS-28 5/8 x FO-32 5/8 x FOS-32 5/8 x FO-36 5/8 x FOS-36 5/8 x FO-40 5/8 x FOS-40 5/8 x FO-48 5/8 x FOS-48 5/8 x FO-56 5/8 x FOS-56 5/8 x FO-64 5/8 x FO-80 5/8 x FO-96 5/8 x FO-144 5/8 x FO-168 5/8 x Preformed Clamps are double wrapped and formed to a given diameter. Used primarily where one end of the hose or article is free to allow the clamps to be slid over the hose end before the fitting is inserted. ll clamps may be pulled down to a smaller diameter but cannot be adjusted to a larger diameter. Catalog Number PREFORMED CLMPS (3/8 ND 5/8 (NOMINL) WIDTH) and Width & Thickness Clamp I.D. Inches Catalog Number and Width & Thickness Double-wrapped, Triple Punched, Holds Permanently F-3 3/8 x /16 FS-3 3/8 x F-311 3/8 x /8 FS-311 3/8 x F-4 5/8 x FS-4 5/8 x F-5 5/8 x /4 FS-5 5/8 x HEVY DUTY NDS F-6 5/8 x /2 FS-6 5/8 x F-7 5/8 x /4 FS-7 5/8 x F-8 5/8 x FS-8 5/8 x F-9 5/8 x /4 FS-9 5/8 x.022 FS9 F-10 5/8 x /2 FS-10 5/8 x F-11 5/8 x /4 FS-11 5/8 x F-12 5/8 x FS-12 5/8 x F-14 5/8 x /2 FS-14 5/8 x F-16 5/8 x FS-16 5/8 x F-18 5/8 x /2 FS-18 5/8 x F-20 5/8 x FS-20 5/8 x F-24 5/8 x FS-24 5/8 x F-28 5/8 x FS-28 5/8 x F-32 5/8 x FS-32 5/8 x CLMPS PPLICTION TOOLS For 3/8", 5/8...F-38, F-40, F-100 See page 285 for these tools. Galvanized Preformed Clamps 2 1/2 inch I.D. and above, and 5/8 wide open end clamps have a stainless steel lock for greater strength and rigidity. Fax: sales@global-hose.com 281

282 K-CLMP K-CLMP PREFORMED HOSE CLMPS HOSE CLMPS Each clamp is a double wrapped metal band formed to a given diameter. The clamp is designed to be slid over the hose end before the fitting is inserted. punch-type or fold-up tool is then used to apply the clamp. Heavy Duty Lock for greater strength and rigidity Punch Indentation for ease of center punching Center Punched Less tension loss. Patented hole in inner band gives better internal mechanical locking after punching Fold-up Heavy Duty Clamp CLMPS GLVNIZED STEEL Catalog Number K-Clamps may be secured by either a punch or fold-up method. (See cross sectioned views) PREFORMED CLMPS (3/8 ND 5/8 (NOMINL) WIDTH) Clamp I.D. Inches and Width & Thickness STINLESS STEEL TYPE 301 Catalog Number K /16" 3/8" x.025 KS K /8" 3/8" x.025 KS K " 5/8" x.030 KS K /4" 5/8" x.030 KS K /2" 5/8" x.030 KS K /4" 5/8" x.030 KS K " 5/8" x.030 KS K /4" 5/8" x.030 KS K /2" 5/8" x.030 KS K /4" 5/8" x.030 KS K " 5/8" x.030 KS K /2" 5/8" x.030 KS K " 5/8" x.030 KS K /2" 5/8" x.030 KS K " 5/8" x.030 KS K " 5/8" x.030 KS K " 5/8" x.030 KS K " 5/8" x.030 KS GLVNIZED STEEL Catalog Number PREFORMED CLMPS (3/4 (NOMINL) WIDTH) Clamp I.D. Inches and Width & Thickness STINLESS STEEL TYPE 301 Catalog Number 316 Stainless available upon request K " 3/4" x.030 KS K /4" 3/4" x.030 KS K /2" 3/4" x.030 KS K /4" 3/4" x.030 KS K " 3/4" x.030 KS K /2" 3/4" x.030 KS K " 3/4" x.030 KS K /2" 3/4" x.030 KS K " 3/4" x.030 KS K " 3/4" x.030 KS K " 3/4" x.030 KS K " 3/4" x.030 KS For 3/8 and 5/8 widths...f-40, F-100 For 3/4 width...f-175(special order item) For all widths...ks001 (with K001 aapter) See page 285 for these tools. 282 Phone:

283 HOSE CLMP FLJ-Clamp PREFORMED HOSE CLMPS FLJ CLMP J-Clamps are available in 3/8, 5/8 and 3/4 widths, from 13/16 to 8 I.D. These non punch type clamps are to be secured by the foldup method, using the Wind-Up tool, our part no. KS001 and adapter K001. K001 FOLD-UP DPTER : KS001 WIND-UP TOOL : GLVNIZED STEEL Catalog Number 3/8" ( NOMINL WIDTH) Clamp I.D. Inches and Width & Thickness STINLESS STEEL TYPE 301 Catalog Number FLJ /16" 3/8" x.025 FLJ FLJ " 3/8" x.025 FLJ FLJ /8" 3/8" x.025 FLJ FLJ " 3/8" x.025 FLJ FLJ " 3/8" x.025 FLJ N/ 3-1/4" 3/8" x.025 FLJ /8" ( NOMINL WIDTH ) FLJ " 5/8" x 0.30 FLJ FLJ /4" 5/8" x 0.30 FLJ FLJ /2" 5/8" x 0.30 FLJ FLJ /4" 5/8" x 0.30 FLJ FLJ " 5/8" x 0.30 FLJ FLJ /4" 5/8" x 0.30 FLJ FLJ /2" 5/8" x 0.30 FLJ /4" ( NOMINL WIDTH ) FLJ " 3/4" x 0.30 FLJ FLJ /4" 3/4' x 0.30 FLJ FLJ " 3/4" x 0.30 FLJ FLJ /2" 3/4" x 0.30 FLJ FLJ " 3/4' x 0.30 FLJ FLJ /2" 3/4' x 0.30 FLJ FLJ " 3/4" x 0.30 FLJ FLJ " 3/4' x 0.30 FLJ FLJ " 3/4" x 0.30 FLJ FLJ " 3/4" x 0.30 FLJ CLMPS Fax: sales@global-hose.com 283

284 FLJS CLMP FLJS-Clamp SMOOTH I.D. CLMPS HOSE CLMPS FLJS - Clamps are double wrapped clamps with a more smooth inside diameter, intended for your thermoplastic and other thinner wall hose clamping applications. The JS series clamps slide on the hose prior to inserting the fitting. Preformed JS - Clamps are available in 5/8 and 3/4 widths, 1 I.D. to 8 I.D. in 1/4 increments. The FLJS - Clamp is intended to be applied with a KS001 tool or other comparable fold-up locking tool. K001 FOLD-UP DPTER : KS001 WIND-UP TOOL : CLMPS STINLESS STEEL Catalog Number 5/8" (NOMINL WIDTH) Clamp I.D. Inches and Width & Thickness FLJS-203 1" 5/8" x FLJS /4" 5/8" x FLJS /2" 5/8" x FLJS /4" 5/8" x FLJS-207 2" 5/8" x FLJS /4" 5/8" x FLJS /2" 5/8" x /4" (NOMINL WIDTH) FLJS-227 2" 3/4" x FLJS /4" 3/4" x FLJS-211 3" 3/4" x FLJS /2" 3/4" x FLJS-213 4" 3/4" x FLJS /2" 3/4" x FLJS-215 5" 3/4" x FLJS-216 6" 3/4" x FLJS-218 7" 3/4" x FLJS-219 8" 3/4" x Phone:

285 HOSE CLMPS CLMP-IT F-38 Loking Tool : $ CLMP-IT The multi-sized clamps all rolled up in one..for your unknown requirements for 1 inch to 30 feet, be they round or otherwise. Clamp-It products will fill your needs. This Strapping in widths of 3/8, 1/2, 5/8, and 3/4 stainless or galvanized steel, as are the clamps (buckles). Catalog Number 100' CLMP-IT STRPPING Width Thickness Material 100'/CTN. C-2 Orbitor (Loking Tool) Used to apply Clamp-It continuous strapping up to 3/4 width / CNT SS /8" Stainless SS /2" Stainless SS /8" Stainless SS /4" Stainless SG /8".025 Galvanized SG /2".030 Galvanized SG /8".030 Galvanized SG /4".030 Galvanized CLMPS (UCKLES) Catalog Number Width Material 100'/ CTN. Each pc. CS /8" 301 Stainless 0.86 CS /2" 301 Stainless 0.96 CS /8" 301 Stainless 1.31 CS /4" 301 Stainless 1.75 CG /8" Galvanized 0.42 CG /2" Galvanized 0.54 CG /8" Galvanized 0.67 CG /4" Galvanized 0.89 $ ORITOR tool of endless travel... this lightweight, side entry, jack-type tool is the most rapid cinch-up application tool in its field. The Orbitor C-2 Loking Tool will handle Clamp-It strapping widths to 3/4 and always reached desired tension without fear of losing travel capacity of the tool. The Clamp-It Strapping, Clamp- It Clamps, and the unique Clamp-It tool add up to a superior system for you. Portable hand tool used to apply punch Type 3/8 & 5/8 Clamps F-40 Loking Tool Used to apply Punch Type 3/8 & 5/8 clamps. Order mallet separately F-100 Loking Tool Used to apply Punch Type 3/8 & 5/8 clamps. Order mallet separately F-225 Mallet Used for punching of all punch type clamps. F-550 Clamp Cutter Used to remove clamps with minimum effort KS001 Wind-up Tool : $ : $ : $ : $ : $ Used to apply fold-up clamps and continuous strapping up to 3/4 width CLMPS Fax: sales@global-hose.com 285

286 CLMPS NON PERFORTED (LINED) ND HOSE CLMPS ll designs exceed SE J1508 specifications Smooth inside surface Even tightening torque for 3600 seal Rolled-up band edge * Non-perforated band prevents hose damage * LUZINC MINI-F and and Housing luzinc/ Painted and Width (9mm) 3/8 wide band Screw Zinc Plated / Chromed Corrosion Factor 100 Sure seal of small thin-walled hoses. Part # Size /64-21/ /32-3/ /16-13/ /64-29/ /64-31/ /16-17/ /32-9/ /64-29/ /64-41/ /32-11/ S.S. MINI-F and and Housing SS2333/ ISI 304 and Width (9mm) 3/8 wide band Screw Zinc Plated / Chromed Corrosion Factor 1000 Industrial Part # Size /64-21/ /32-3/ /16-13/ /64-29/ /64-31/ /16-17/ /32-9/ /64-29/ /64-41/ /32-11/ LUZINC Provides a strong seal Tolerates corrosive environments and and Housing luzinc/ Painted and Width (12.2mm) 3/8 wide band Screw Zinc Plated / Chromed Corrosion Factor 100 Part # SE Size /8-15/ /4-1-1/ /8-1-1/ /16-1-1/ /4-1-3/ / /4-2-1/ / / /16-3-3/ / /16-4-7/ /8-5-7/ /8-7-1/ /8-7-1/ /8-8-1/ /8-9-1/ /8-10-1/ /8-11-1/ /8-12-1/ HOSE CLMPS Precision thread pitch for high vibration applications Design allows reuse and and Housing SS2333/ ISI 304 and Width (12.2mm) 1/2 wide band Screw SS2333/ ISI 304 Corrosion Factor 1000 Industrial ll 304 S.S. Part # SE Size /8-15/ /4-1-1/ /8-1-1/ /16-1-1/ /4-1-3/ / /4-2-1/ / / /16-3-3/ / /16-4-7/ /8-5-7/ /8-7-1/ /8-7-1/ /8-8-1/ /8-9-1/ /8-10-1/ /8-11-1/ /8-12-1/ and and Housing luzinc/ Painted and Width (9mm) 3/8 wide band Screw Zinc Plated / Chromed Corrosion Factor 100 LUZINC NOV Part # SE Size /16-9/ /16-11/ /2-13/ /8-15/ /4-1-1/ /8-1-1/ /16-1-1/ /4-1-3/ / /4-2-1/ / / /16-3-3/ Phone:

287 HOSE CLMPS and and Housing SS2333/ ISI 316 and Width (12.2mm) 1/2 wide band Screw SS2333/ ISI 304 Corrosion Factor 1000 Industrial LL 316 CID RESISTNT Part # SE Size /16-9/ /16-11/ /2-13/ /8-15/ /4-1-1/ /8-1-1/ /16-1-1/ /4-1-3/ / /4-2-1/ / / /16-3-3/ / /16-4-7/ /8-5-7/ /8-7-1/ /8-7-1/ /8-8-1/ /8-9-1/ /8-10-1/ /8-11-1/ /8-12-1/ LUZINC EXHUST CLMP Uniform tightening force around the exhaust tubes for a good seal. Part # Size HOSE CLMPS 304 S.S. RUER CLIP Eliminates hose and cable wear due to vibrations Part # Size Hole Dia / / / / / / / / / / / / / / / Eliminates hose and cable wear due to vibrations LUZINC RUER CLIP Part # Size Hole Dia / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / NON PERFORTED (LINED) ND LUZINC ROUST and and Housing luzinc/ Painted Screw Zinc Plated/ Chromed Corrosion Factor 100 Part # Size (mm) and Width (mm) single question can be more influential than a thousand statements. - o ennett CLMPS Fax: sales@global-hose.com 287

288 CLMPS HOSE FERRULES Part # SMOOTH RSS HOSE FERRULES Ferrule # I.D. Length Pierce Gauge R R JJ JJ II HH GG EE DD CC L lso available in steel. Call for a quote! More sizes available HOSE CCESSORIES HOSE CRIMPERS HOSE CRIMPERS Provides production capability and big tool crimping advantages at just a fraction of the cost of other tools offering comparable results. HOSE CRIMPER COMES WITH 5 DIES # THRU # Part # Hose Crimper REPLCEMENT DIES Part # Size /8" /64" /32" /64" /16" /16" /4" /16" /8" HOSE REELS LOW PRESSURE Reels are ideally suited for plant maintenance or many other industrial functions where hose storage is a problem. Standard hose for air,water and oxygen/ acetylene application. Made in the US. ll metal reel. Unitized multi-functional hub arbor. 8 Position guide arm. Minimal size envelope permits installation where space is a factor. Simple design incorporates fewer parts. Single set screw to access latch area and spring case. Heavy gauge base with no welds. Part # Operating Capacity Hose ID Shipping Pressure I.D. Length Weight / / ir/ Water Oxygen/ cetylene 288 Phone:

289 CORROSION RESISTNCE VLUES for Plastic Tubing Ratings based on tests at 70 0 F and should not be exposed to higher temperature without testing F-5000 Poly Vinyl Chloride U-2000 Polyurethane E-1000 Low Density Polyethylene N-6000 Nylon F U E N P D T U FUELS: utane (1)... G G L G L G G N Diesel Fuel... L G L G L P N G Gasoline (regular)... L G P G L N G G Kerosene... L G P G G P G G Methane (nat. gas)(1)... G G L G G N N N Propane (1)... G G L G L N N N OTHERS: cetylene... N G G G G N N N mmonia gas... P G G G G G N N mmonium salts... G G G G G G N N myl acetate... P P L G P P G N niline... P P L L G P G N nimal oils... G G P G G N G G leach, 7%... G P G L L N N G romine... L G P P P P G N utandiol... G G G G G N N N Calcium salts incl. Chloride... G G G G G N G G Chlorine gas, dry... G G P P P P N N Dibutyl phthalate... N P L G L P N G Glucose... G G G G G G G G Glycerine... G G G G G G N G Hydrogen peroxide 10%... G G G G G G G G Hydrogen peroxide 25%... L G G P G G G G Hydrogen sulfide... G P G L G N G N Isocyanates... N G G G N P N N Lead salts (3)... G G G G G N N N Magnesium salts... G G G G G N G N Mercury... G G G G G G N N Milk... G G G G G G N G Mineral Oil... G G L G L P G G Nitrous Oxide (1)... G G L G G N N N Oxygen (1)... G G G G G G G G Ozone, ambient... G G L G L N N G Paint, oil base... L G L G G N N G Polyglycols... G G G G G N N N Potassium salts... G G G G G N G N Pydraul... P P P G N N N N Pyridine... P L G L G N G N Salt Water... G G G G G G G G Silver Nitrate... G G G G G G G N Skydrol... P P P G N N N N Soap solution (conc.)... G G L G G N G G Sodium salts... G G G G G N G G Sodium thiosulphate... G G G G G N G G Styrene... P G P G N N N G Trisodium phosphate... G G N G G G N G Ucon oil... G G G G N N N N Urea... G G G G G N G G Vegetable oils (1)... G G G G G P N G Water at 730F... G G G G G G G G Water at 1400F... L G G G G G G G Water at 1700F... P L N L G P N G Whiskey, wine (1)... N G G G G G N G Zinc Chloride... G G G G G G G N 1/16 1/8 3/16 5/16 TUING TUING O.D. SIZE 1/2 5/8 3/4 P-1100 Polypropylene D-4000 EV T-7000 Teflon U-8000 Special Plasticizers PVC TUING PLSTIC PIPE G-Good L-Limited P-Poor N-Not Tested F U E N P D T CIDS & SES cetic, 50%... G P P L G P G oric... G G G G G G G Carbolic (phenol)... P P G P G P N Fatty... G G P G G N G Formic, 90%... G P G P G G G Hydrochloric, 10%... G G G L G G G Hydrochloric, 25%... G L G P G L G Hydrochloric, 50%... G L G P G L G Hydrocyanic, 50%... L P G P G G G Maleic... G P G G G N N Nitric, 10%... G P G L G L G Nitric, 30%... G P G P L L G Oleic... L G L G G P N Phosphoric, 25%... G L G G G G N Sulfuric, 30%... G L G L G L G Sulfuric, 70%... L P P P G P G Sulfuric, 98%... P P P P G P G Sulfurous, 30%... G P G L G N G Tannic... G P G G G N G mmonium hydroxide, 25%... P G L G G G N Potassium hydroxide, 25%. L G G G G G G Sodium hydroxide, 50%... G G G G G L G SOLVENTS: cetone... P P G G L P G enzene... P L P G P P G Carbon tetrachloride... P L L L P P G Chloroform... P P P L P P G Cyclohexanone... P P P G L P G Dimethylformamide... P P L N G N N Dioxane... N N P G L N N Ethyl acetate... P L G G L P G Ethyl alcohol (1)... L G G L G G G Ethyl ether... L L G G L P N Ethylene glycol... G G G G G G N Formaldehyde... G G G G G L N Freon - 12'... L L G G L N G Methyl alcohol... L G G L G N N Methylene chloride... P P L G L P N Methyl ethyl ketone... P P G G L P N Naphthas (2)... P G P G L P G Tolulene... P G P G L P N Triclorethylene... P P P L P P G Turpentine... G G P G L P G Xylene... P G P G L P N HYDRULIC FLUIDS: Diester base grease... N G P G L P N Petroleum base grease... G G L G L P N Phosphate ester... L P P G G N N Polyol ester... P N P G G N N Water-glycol... G G G G G N N SE motor oils... G G G G G N N Machine oil... G G L G L N N MIL-L-7808 H... G G L G G N N rake Fluid... N N N N N N N METRIC TUING O.D. SIZE TUING 1/4 Fax: /8 3mm 6mm 8mm 10mm sales@global-hose.com 12mm 18mm 289

290 PLSTIC TUING TUING LINER LOW DENSITY POLYETHYLENE TUING Polyethylene is made from 100% non-toxic ingredients. It's inert nature and FD compliant status makes it perfect for food, water and beverage piping. It is ideal for use in pneumatic, drain piping, lab use and chemical transfer applications which require an inexpensive tubing Polyethylene is highly-resistant to stress cracking from chemicals, aging and ultraviolet exposure. For use with barb-type, push-to-connect or compressionstyle fittings. Features Chemically Inert Chemical Resistant Lightweight & Flexible Good Dielectric Properties Impermeable to Gases Meets FD Requirements Multiple Colors vailable Specifications Temperature Range: -50 F to +140 F Hardness: Shore 93 Shore D 45D pplications Food & everage Pneumatic Tools Pneumatic Piping Electrical Jacketing Drain Lines Instrumentation Chemical Transfer Process Control Laboratories Colors vailable: lack=,lue = U, Green = G, Red = R, Yellow = Y, Orange = O. To order colors, delete the 9 prefix and add color suffix. For longer lengths, add length suffix. TUING 100' LENGTH Part # Tube O.D. Tube Wall urst PSI /8" /32" /16" /4" /4" /16" /8" /2" /8" /4" /4" " ' LENGTH Part # Tube O.D. Tube Wall urst PSI N5 1/8" N5 1/4" N5 1/4" N5 3/8" N5 1/2" ' LENGTH Part # Tube O.D. Tube Wall urst PSI N1 1/4" N1 1/4" N1 3/8" Phone:

291 TUING PLSTIC TUING 100' LCK POLYETHYLENE TUING 100' ORNGE POLYETHYLENE TUING POLYETHYLENE METRIC TUING Part # O.D /8" /32" /16" /4" /4" /16" /8" /2" /8" ' LUE POLYETHYLENE TUING Part # O.D U 1/8" U 5/32" U 3/16" U 1/4" U 1/4" U 5/16" U 3/8" U 1/2" ' GREEN POLYETHYLENE TUING Part # O.D G 5/32" G 1/4" G 1/4" G 5/16" G 3/8" G 1/2" ' RED POLYETHYLENE TUING Part # O.D R 1/4" R 5/16" R 3/8" ' WHITE POLYETHYLENE TUING Part # O.D W 1/4" W 3/8" W 1/2" ' YELLOW POLYETHYLENE TUING Part # O.D O 1/4" ' GRY POLYETHYLENE TUING Part # O.D /8" ' LCK REEL Part # O.D /4" /16" /8" /2" ' LUE REEL Part # O.D U5 1/4" U5 3/8" ' GREEN REEL Part # O.D G5 1/4" ' RED REEL Part # O.D R5 1/4" ' WHITE REEL Part # O.D WS 1/2" ' LCK REEL Part # O.D /8" ' LUE REEL Part # O.D U1 1/4" ' GREEN REEL Part # O.D G1 1/4" Part # MM O.D. MM I.D. NSF-61 CERTIFIED POLYETHYENE TUING Exceeds FD expectations with it's NSF-61 Certification for drinking water applications. manufactured from 100% non-toxic ingredients. Perfect for drinking water, beverage and food applications. With a complete range of sizes, colors and packaged lengths, is the perfect one stop shop tubing option. Include NSF- 61 Certified plastic push-in fittings and complete your assembly needs. Water Purification Water Conditioners Ice Makers Misting systems Length meters M M M M M M M Colors vailable: lack=,lue = U, Red = R, Yellow = Y, Orange = O. Part #;s are for 100' rolls Package Lengths: 5=500', 1=1000' To order colors, delete the 9 prefix and add color suffix. For longer lengths, add length suffix. Part # O.D /4" /8" /2" TUING Part # O.D Y 1/4" Y 5/16" Y 3/8" ' RED REEL Part # O.D R1 1/4" Fax: sales@global-hose.com 291

292 NYLON 12 TUING TUING NYLON 12 TUING Nylon 12 tubing is recognized as an industry standard for applications which require higher working pressures and higher heat and/or chemical resistance. It is ideal for outdoor use applications because of its superior stress crack resistance. Nylon 12 is strong, lightweight and has a very low moisture absorbtioin rate compared to other nylons. y not absorbing moisture, Nylon 12 remains more flexible, which in turn extends it's service life. Nylon 12 tubing can be used with standard push-to-connect fittings and compression fittings for simple installation. Features Strong Lightweight Flexible brasion Resistant Heat Resistant Chemical Resistant ecause of it's semi-rigid properties, a thinner tube wall provides higher flow rates and working pressure. Specifications pplications Temperature Range: -60 F to +200 F Pneumatic Tools Chemical Transfer Hardness: Rockwell 78 R Pneumatic Piping Vacuum Shore D 70 Instrumentation Process Control Vacuum Rating: To 28" Hg Lube Lines Fuel Lines Higher Flow Rates & Working Pressure Coolants Paint Supply Lines Tolerances: 1/8'-1/4" +/-.004 Refrigeration Laboratories 3/4"-1/2" +/-.006 TUING Colors vailable: lack=,lue = U, Green = G, Red = R, Yellow = Y, Orange = O. Part #'s shown are for natural. For colors, delete 9 prefix and add color. for 500' add a 5 sufix, for 1000' reels add a ' LENGTH Part # Tube O.D. Tube Wall urst PSI /8" /32" /16" /4" /4" /4" /16" /8" /2" /8" METRIC LENGTH - 25 METERS Part # MM O.D. MM I.D. MM Wall urst PSI Phone:

293 TUING PVC/ LUMINUM/ COPPER TUING PVC POLYVINYLCHLORIDE TUING PVC is suited for general, low-pressure, industrial applications for the conveyance of liquids and solids of suitable granlar size. Made from a PVC compound that complies with FD regulations. lthough it is primarily intended for applications where pressure is not essential, it will withstand the pressures shown. The clear PVC Tubing provides good chemical resistance, is lightweight, flexible and economically priced. Features Lightweight Flexible Food Grade Clear Color Colors vailable: Clear Package Lengths: 100' Specifications Temperature Range: +25 F to +150 F Hardness: Shore 75 PVC Meets FD requirements NSF 51 Certified to 100 F(38 C) USP Class VI rated materials pplications everage Dispensing Drain Tubing Potable Water Laboratory Tubing Wine Transfer Low Pressure ir Line Distilled Water Transfer Light Vacuum Wire Harness 100' LENGTH Part # Tube I.D. Tube O.D. Tube Wall Min. urst /8 3/16 1/ /8 1/4 1/ /16 5/16 1/ /4 3/8 1/ /16 7/16 1/ /16 1/2 3/ /8 1/2 1/ /8" 5/8" 1/8" /8 9/16 3/ /2 5/8 1/ /4 1 1/ /4 1/ LUMINUM TUING COPPER TUING COPPER TUING lloy Material STM280 For residential water lines to STM STM -483 POR -483 POR TUING LUMINUM VERSTUE 50' COILS Part # O.D. Wall Thick 50' Coils / / / / / / Fax: REFRIGERTION COPPER TUE 50' COILS Part # O.D ctual Wt. 50' Coil Wall Thick / / / / / / / / TYPE L SOFT COPPER TUING 60' COILS Part # O.D Nom Wt. 50' Coil Wall Thick / / / * dd 1/8" to Nom OD to get the ctual OD POR = On Request sales@global-hose.com 293

294 POLYURETHNE TUING Features Strong Lightweight Flexible brasion Resistant Heat & Cold Resistant Chemical Resistant Meets NSF Requirement Kink Resistance TUING POLYURETHNE Polyurethane (PUR) tubing is made from the highest qualtity raw materials available. It is etherbased to provide excellent hydrolysis, oil and cold resistance. Polyurethane is strong and flexible and offers superior kink resistance compared to other tubing. It is 5 to 10 times more wear resistant and lighter in weight than any rubber hose. Polyurethane tubing has an outside diameter made to extremely tight tolerances. it is ideal for use with push-to-connect fittings, as well as barb-type compression fittings for simple installation. Specifications pplications Temperature Range: -40 F to +160 F Pneumatic Tools Instrumentation Hardness: Shore 98 Pneumatic Piping griculture Vacuum Rating: To 28" Hg Vacuum Ship Piping Higher Flow Rates & Working Pressure Laboratories Chemical Plant Tolerances: 1/8'-1/2" +/-.005 Robotics Lubrication Systems 9/16"-3/4" +/-.006 Motion Control Painting Systems Colors vailable: lack=,clear lue = C, Clear Green = CG, Green = G, Light Green = LG, Red = R, Yellow = Y, White = W. TUING Parts shown are for clear tubing. For colors delete the 9 prefix in part number add color suffix to the end of the part number. dd a 5 to the end of the part # to specify 500' or a 1 for 1000'. 100' LENGTH METRIC SIZES Part # Tube O.D. I.D /8 1/ /32 3/ /16 1/ /4 1/ /8 1/ /2 3/ Part # Tube O.D. Tube I.D. 25 Meters MINI-TUING CUTTER Great for tight places TUING CCESSORIES TUING CUTTER PLSTIC TUE CUTTER Range: 1/8-3/8 I.D. (3mm-10mm) Part # Size mm-22mm (1/8"-7/8") 5.54 Part # Size /8"-1-1/8" 9.69 Part # Description Cutter w/lade Phone: Route and secure multiple tubing lines Mounting versatility - Racks can be easily hand separated down to single holders. - Thru holes provided (all sizes) Standard color is LCK. Other colors available on special request. Note: Mounting screws not provided Part # Tubing OD Description Channels /4 non-adhesive /4 adhesive /8 non-adhesive /2 non-adhesive

295 HOSE CLERRID PVC HOSE CLERRID PVC HOSE ( FD LISTED ) DESCRIPTION: Food and beverage transfer hose TUE COMPOUND: PVC REINFORCEMENT: 3 Polyester Spirals COVER: PVC Clear TEMP. RNGE: +25 to +150F / -5 to +65C PPLICTIONS: Food and everage Transfer, General Industrial, Water Main and Water Feed Hoses, ir, Pneumatic pplications and Light Vacuum Part Number ID Length Working Pressure urst Pressure Weight Inch PSI PSI Per/ft /16 300' /4 300' /8 300' /2 300' /4 300' ' /4 100' /2 100' ' PVC WIRE VCUUM TRNSFER HOSE CLER PVC WIRE REINFORCED VCUUM HOSE 100' STNDRD LENGTHS DESCRIPTION: Potable and Pure Water Transfer Hose TUE COMPOUND: PVC Clear REINFORCEMENT: Multiple Polyester Spirals COVER: UV Resistant Opaque lue Flexible PVC TEMP. RNGE: -13 to +150F / -25 to +65C PPLICTIONS: Potable and pure water transfer, temporary municipal water supply connections, bottled water plants, collection of water of analysis. TUING 100' LENGTHS Part Number ID OD Working Pressure Weight Inch Inch PSI lb/ft / / / / / Fax: sales@global-hose.com 295

296 GENERL PURPOSE PVC HOSE HOSE GENERL PURPOSE PVC HOSE 150' LENGTHS TUE: lack PVC REINFORCEMENT: 2 Polyester Spirals COVER: PVC ( Red, Yellow, lue and lack ) TEMP. RNGE: +25 to +150F / -5 to +65C PPLICTIONS: ir and water lines, light vacuum, mold machine water cooling, water soluble chemical spray. Parts shown are for black. For lue add U to part #, Yellow add Y and red add R. Part # ID OD Working Pressure urst Pressure Weight Inch Inch PSI PSI lb/ft / / / / / HEVY DUTY PVC SPRY HOSE TUING HEVY DUTY SPRY HOSE 600PSI ( YELLOW ) ND 800PSI ( GREEN ) 5 PLY ONDED CONSTRUCTION SPECILLY FORMULTED COMPOUND SUITLE FOR HRSH FIELDWORK ENVIRONMENT SUPER RSION RESISTNCE LONG LSTING FLEXIILITY RESISTNT TO FUNGICIDES, INSECTICIDES, FERTILIZERS ND MORE 300' ROLLS Part # ID COLOR WP Weight Per/ft /8" Yellow 600PSI /2" Yellow 600 PSI /8" Green 800 PSI /2" Green 800 PSI Phone:

297 PNEUMTIC CCESSORIES 1/4 SIC SIZE UNIVERSL SERIES COUPLERS 1/4 SIC SIZE For RO, TRU-FLTE, INDUSTRIL INTERCHNGE 1/4 SIC SIZE utomatic Coupler rass body, NR Seal, Stainless Steel spring, Steel locking balls. Good for low pressure fluid lines. Industrial QUICK DISCONNECTS ccepts all 3 styles of plugs! Parker Working range: Maximum operating Pressure To 220 psi RO Temperature: -4 0 to F MLE COUPLER FEMLE COUPLER HOSE R COUPLER RSS RSS RSS Part # Size Part # Size Part # Hose I.D. Size /4" NPTF /4" NPTF /4" /8" NPTF /8" /4 SIC SIZE INDUSTRIL INTERCHNGE 1/4 SIC SIZE Specifications Sleeve type couplings are widely used to connect compressed air and low pressure ody Size (in.) 1/4 fluid lines. Rated Pressure (PSI) 250 Their compact and economical design uses a ball locking mechanism consisting of captive steel balls that engage the locking groove on the mating nipple. The Temperature Range -4 to +176 sliding spring loaded sleeve on the coupler must be manually retracted in order to connect or disconnect the nipple. It is easy to do, but two hands are normally required. Common applications include: compressed air, water, grease, paint, limited vacuum and limited gases. MLE PIPE COUPLER The standard is a brass coupler and valve with steel locking balls, NR seat, and stainless steel springs. HOSE RSS ID ID COUPLER FEMLE PIPE COUPLER RSS RSS Part # NPT Size /4" /8" 6.97 STEEL 28552S 1/4" S 3/8" 5.00 MLE PLUG STEEL Part # NPT Size / / / TURNING SWIVEL SWIVEL PLUG PLUG 1/4" asic size Industrial Interchange Plug 360 Turning Swivels Part # NPT Size 3, /4" /8" 7.08 STEEL 28540S 1/4" S 3/8" 5.20 FEMLE PLUG STEEL Part # NPT Size /8" /4" /8" 2.20 Part # Hose ID /4" /8" /4(Push on) /8(Push on) 9.87 STEEL S 1/4" S 3/8" S 1/4(Push on) S 3/8(Push on) 5.67 HOSE ID PLUG STEEL Part # NPT Size /4" /8" /4(Push on) /8(Push on) 1.78 PNEUMTICS Part # Size /4" Fax: sales@global-hose.com 297

298 QUICK DISCONNECTS PNEUMTIC CCESSORIES 3/8 SIC SIZE INDUSTRIL INTERCHNGE 3/8 SIC SIZE Specifications Sleeve type couplings are widely used to connect compressed air and low pressure ody Size (in.) 3/8 Rated Pressure (PSI) 250 Temperature Range -4 to +176 fluid lines. Their compact and economical design uses a ball locking mechanism consisting of captive steel balls that engage the locking groove on the mating nipple. The sliding spring loaded sleeve on the coupler must be manually retracted in order to connect or disconnect the nipple. It is easy to do, but two hands are normally required. Common applications include: compressed air, water, grease, paint, limited vacuum and limited gases. The standard is a Steel coupler with a Steel valve, NR seat, and stainless steel springs. rass coupler avail. on request. 3/8" asic size. MLE COUPLER FEMLE COUPLER HOSE ID ID COUPLER STEEL STEEL STEEL Part # NPT Size /4" /8" /2" Part # NPT Size /4" /8" /2" Part # NPT Size /4" /8" /8"( Push on ) MLE PLUG FEMLE PLUG HOSE ID ID PLUG STEEL STEEL STEEL PNEUMTICS Part # NPT Size /4" /8" /4 SIC SIZE PRKER INTERCHNGE (TRU-FLTE) 1/4 SIC SIZE Specifications The standard is a brass coupler and valve with steel locking balls, NR seat, ody Size (in.) 1/4 and stainless steel springs. Rated Pressure (PSI) 250 Unique design has been field proven as a long lasting, high performance coupling especially when used with pneumatic tools. Temperature Range -4 to +176 Marval connect and disconnect. HOSE ID COUPLER MLE PIPE COUPLER FEMLE PIPE COUPLER RSS RSS 1/4 RSS ody Size Part # NPT Size /8" /4" /8" MLE PLUG STEEL Part # NPT Size /4" /8" 2.37 Part # NPT Size /8" /4" /8" FEMLE PLUG STEEL Part # Hose I.D. Size /8" /8"( Push on ) 3.78 Part # Size /4" /8" /4"(Push on) /8"(Push on) HOSE ID ID PLUG STEEL Part # NPT Size /8" /4" /8" 2.37 Part # NPT Size /8" /4" /8" 2.29 Part # Size /4" /8" /4"(Push on) /8"(Push on) Phone:

299 PNEUMTIC CCESSORIES QUICK DISCONNECTS 1/4 SIC SIZE RO 210 INTERCHNGE 1/4 SIC SIZE Specifications ody Size (in.) 1/4 Rated Pressure (PSI) 250 Temperature Range -4 to +176 MLE PIPE COUPLER FEMLE PIPE COUPLER HOSE ID COUPLER RSS rass bodies and valves, steel locking balls, NR seat, and stainless steel springs. Couplings have a full opening tubular valve for maximum flow and a built-in sleeve guard to minimize accidental disconnect. Marval connect and disconnect. RSS RSS Part # NPT Size /8" /4" /8" MLE PLUG FEMLE PLUG HOSE ID PLUG STEEL Part # NPT Size /8" /4" /8" STEEL Part # Size /4" /8" STEEL Part # NPT Size /8" /4" 1.58 Specifications rass - Coupler & Steel Plug Temperature Range -40 to 250 Rated Pressure Part # NPT Size /8" /4" 1.85 ST SERIES...HIGH FLOW MLE PIPE COUPLER RSS Part # Size /4" /8" 6.78 FEMLE PIPE COUPLER RSS Non-valved couplings for applications where maximum flow is required. Ideal for applications such as high pressure water and steam washers, carpet cleaners and mold coolant lines. They are often used in food processing, on fluid and dye transfer lines. Standard seals are una-n (Nitrile). Part # ody & Thread Size /8" /4" /8" /2" /4" " MLE PLUG STEEL Part # ody & Thread Size /8" /4" /8" /2" /4" " FEMLE PLUG STEEL PNEUMTICS Part # Size /8" /4" /8" /2" /4" " Part # Size /8" /4" /8" /2" /4" " Fax: sales@global-hose.com 299

300 QUICK COUPLERS Working Range: psi Material: Chrome Plated rass MINI TYPE QUICK DISCONNECTS PNEUMTIC CCESSORIES MLE Male COUPLER Coupler FEMLE Female COUPLER Coupler Male MLE Plug PLUG FEMLE Female PLUG Plug Part # Size /8" 6.86 Part # Size /8" 6.86 Part # Size /8" 2.30 Part # Size /8" /4" asic Size Specifications ody Size (in.) 1/4 Rated Pressure (PSI) 250 Temperature Range -40 to +250 rass body with steel sleeve and backnut. Valve material is cetal and seal is Nitrile. LINCOLN INTERCHNGE MLE PIPE COUPLER Part # Size /8" /4" MLE PLUG Steel FEMLE PIPE COUPLER Part # Size /4" FEMLE PLUG Steel Part # Size /8" /4" 4.56 Part # Size /4" 4.56 MOLD COOLNT-LINE QUICK COUPLERS OPERTING PRESSURE: 200 PSIG (14.06 Kg/sq. cm) Standard Seal: SILICONE: -90 F to 400 F (-68 C to C) Coolant couplers are engineered for optimum speed and performance in connecting coolant lines to molds used for thermoplastic, thermosetting, blow molding, diecasting and on other types of tooling and equipment utilizing a constant fluid flow pumped through cooling channels. PNEUMTICS RSS MLE PLUG (RSS) 1/4 SIC SIZE Part # Size /8" /4" /8" /8 SIC SIZE Part # Size /4" /8" /2" /2 SIC SIZE Part # Size /2" /4" STEEL FEMLE PLUG (STEEL) 1/4 SIC SIZE Part # Size /8" /4" /8" /8 SIC SIZE Part # Size /4" /8" /2 SIC SIZE Part # Size /2" /4" Phone:

301 PNEUMTIC CCESSORIES MOLD COOLNT-LINE QUICK COUPLERS D-M-E, PRKER and FOSTER INTERCHNGE QUICK COUPLERS Straight Stem 90 Stem 45 Stem ody Only 1/4 SIC SIZE, RSS STRIGHT THROUGH (Non-Valved) Hose ID Size Straight Stem 90 Stem 45 Stem ody Only Part # Part # Part # Part # 1/4" /4" (Push On) (1/8" Female Pipe) 5/16" /8" /8" (Push On) /4 SIC SIZE, RSS VLVED Hose ID Size Straight Stem 90 Stem 45 Stem ody Only Part # Part # Part # Part # 1/4" /4" (Push On) (1/8" Female Pipe) 5/16" /8" /8" (Push On) /8 SIC SIZE, RSS STRIGHT THROUGH (Non-Valved) Hose ID Size Straight Stem 90 Stem 45 Stem ody Only Part # Part # Part # Part # 3/8" /8" (Push On) (1/4" Female Pipe) 1/2" /2" (Push On) /8 SIC SIZE, RSS VLVED Hose ID Size Straight Stem 90 Stem 45 Stem ody Only Part # Part # Part # Part # 3/8" /8" (Push On) (1/4" Female Pipe) 1/2" PNEUMTICS 1/2 SIC SIZE, RSS STRIGHT THROUGH (Non-Valved) Hose ID Size Straight Stem 90 Stem 45 Stem ody Only Part # Part # Part # Part # 1/2" /2" (Push On) (1/2" Female Pipe) 3/4" Fax: sales@global-hose.com 301

302 QUICK DISCONNECT HYDRULIC COUPLINGS THRED TO CONNECT, DRYREK NO-SPILL QUICK CONNECT PSI MX rass ody Steel Wing Nut una-seal ( -40 to +250 F) eroquip S100 Parker 6100 Snaptite 78 Part # ody Size Female NPT /4 1/ * More sizes available, just ask. NEW onded Face Seal External ORing ensures Full Connection Part # ody Size NPT /4 1/ FETURES Poppet valves to prevent uncoupled leakage Critical parts are induction hardened for durability Dependable ball-locking mechanism holds the maling halves together Socket and plug are precision machined from solid barstock Standard nitrile seals temp range -40 F to +250 F ISO ISO- Interchange ( Connected ) Steel Coupler/ Plug ody Size Maximum Working urst PSI ar PSI ar 1/4" 5, ,270 1,200 3/8" 4, ,270 1,200 1/2" 4, ,500 1,100 3/4" 4, ,800 1,000 1" 4, , /4" 3, , /2" 3, , " 1, , INTERCHNGE DT: Parker 6600, eroquip/ Eaton FD56, Dixon 'K' Series. Hansen H 15000, Safeway S56 LOWER PRICES FEMLE PIPE COUPLER Part # ody Size NPT NV-14-F 1/4" 1/4" NV-38-F 3/8" 3/8" NV-12-F 1/2" 1/2" NV-34-F 3/4" 3/4" NV-1-F 1" 1" FEMLE PIPE PLUG Part # ody Size NPT NV-14-M 1/4" 1/4" 5.95 NV-38-M 3/8" 3/8" 6.39 NV-12-M 1/2" 1/2" 7.34 NV-34-M 3/4" 3/4" NV-1-M 1" 1" PNEUMTICS 302 ISO Series ISO- Interchange ( Connected ) Steel Coupler/ Plug rass Coupler/ Plug ody Max. Working urst Max. Working urst Size PSI ar PSI ar PSI ar PSI ar 1/8" 4, ,500 1,000 3, ,500 1,100 1/4" 5, ,500 1,550 3, ,000 1,000 3/8" 4, ,500 1,150 2, , /2" 4, ,000 1,100 2, , /4" 4, ,500 1,150 2, , " 4, ,000 1,100 1, , INTERCHNGE DT: Parker 60 Series, Snap-tite 72 series, Dixon 'H' series Hansen HK - series, eroquip/ Eaton FDH5 LOWER PRICES NEW SUFFIX '' = RSS MTERIL Phone: FEMLE PIPE COUPLER Part # ody Size NPT HNV-14-F 1/4" 1/4" HNV-14-F- 1/4" 1/4" HNV-38-F 3/8" 3/8" HNV-38-F- 3/8" 3/8" HNV-12-F 1/2" 1/2" HNV-12-F- 1/2" 1/2" HNV-34-F 3/4" 3/4" HNV-34-F- 3/4" 3/4" HNV-1-F 1" 1" HNV-1-F- 1" 1" PLUG Part # ody Size NPT HNV-14-M 1/4" 1/4" 6.80 HNV-14-M- 1/4" 1/4" 9.01 HNV-38-M 3/8" 3/8" 6.39 HNV-38-M- 3/8" 3/8" HNV-12-M 1/2" 1/2" 7.26 HNV-12-M- 1/2" 1/2" HNV-34-M 3/4" 3/4" HNV-34-M- 3/4" 3/4" HNV-1-M 1" 1" HNV-1-M- 1" 1"

303 HYDRULIC COUPLINGS QUICK DISCONNECT FF Series HTMC 74C FLUSH FCE Steel Coupler/ Plug Coupled ody Size Maximum Working urst PSI ar PSI ar 1/4" 5, ,270 1,200 3/8" 4, ,270 1,200 1/2" 4, ,500 1,100 5/8" 4, ,800 1,000 3/4" 4, , " 3, , FEMLE PIPE COUPLER Part # ody Size NPT FF-14-F 1/4" 1/4" FF-38-F 3/8" 3/8" FF-12-F 1/2" 1/2" FF-34-F 3/4" 3/4" FF-1-F 1" 1" FETURES Steel construction, zinc plated trivalent finish. Hardened Nipples and sleeves and solid barstock construction for maximum resistance to damage from hydraulic and mechanical shock. This nti-lowout Nitrile/ PTFE bonded seal is designed to prevent blow out or damage during servere service conditions. Durable ball-locking mechanism assures reliable connection everytime. FF Series HTMN 74N PLUG Part # ody Size NPT FF-14-M 1/4" 1/4" FF-38-M 3/8" 3/8" FF-12-M 1/2" 1/2" FF-34-M 3/4" 3/4" FF-1-M 1" 1" G - Series gricultural Interchange ( Connected ) Steel Coupler/ Plug Nominal Maximum Working urst Size PSI ar PSI ar 1/4" 4, ,000 1,500 3/8" 4, ,100 1,600 1/2" 4, ,500 1,100 3/4" 3, , " 3, , FETURES Heavy duty heat treated poppet: valves are standard with rugged, speciallydesigned seals made of nitrite for leak-free performance in the toughest application. High-strength steel valve guides designed for high flow rates and made extra tough for agricultural service. Dependable hardened chrome alloy steel locking balls. Heat treated plugs and sleeves. Standard seals temp range -40 F to +250 F Snap-Tite 60 Series FEMLE PIPE COUPLER Part # ody Size NPT NV-14-F 1/4" 1/4" NV-38-F 3/8" 3/8" NV-12-F 1/2" 1/2" NV-34-F 3/4" 3/4" NV-1-F 1" 1" PLUG Part # ody Size NPT NV-14-M 1/4" 1/4" NV-38-M 3/8" 3/8" NV-12-M 1/2" 1/2" NV-34-M 3/4" 3/4" NV-1-M 1" 1" PNEUMTICS Fax: sales@global-hose.com 303

304 PNEUMTICS RSS MUFFLERS STINLESS RETHER VENT PNEUMTIC CCESSORIES SPEED CONTROL VLVE Materials: ody: rass Element: Sintered ronze Max Operating Pressure: 300PSI Temperature: 35 to 300 F Part # Size /32" /8" /4" /8" /2" /4" " Micron element STINLESS MUFFLERS Materials: ody: 303 Grade Stainless Steel Element:316 Grade Stainless Steel Max Operating Pressure: 150PSI Temperature: 35 to 390 F Part # Size /8" /4" /8" /2" /4" " PRESSURE SNUER Materials: ody: rass Element: 40 Micron Sintered ronze Max Operating Pressure: 300PSI Temperature: 35 to 300 F Part # Size /8" /4" /8" /2" /4" " STINLESS SPEED CONTROL VLVE PNEUMTICS Materials: ody: 303 Grade Stainless Steel Element: 316 Grade Stainless Steel Max Operating Pressure: 300PSI Temperature: 35 to 392 F Part # Size NF /8" /4" /8" /2" /4" " RSS RETHER VENT Materials: ody: rass Element: Sintered ronze Max Operating Pressure: 150PSI Temperature: 35 to 300 F 40 Micron element Part # Size " /8" /4" /8" /2" /4" " Materials: ody: rass Element: Sintered ronze Max Operating Pressure: 9000PSI Temperature: 35 to 300 F Part # Size Porosity /4" 40 um /4" 30 um /4" 25 um /4" 20 um /4" 10 um Part # Size Porosity /8" 40 um /8" 30 um /8" 25 um /8" 20 um /8" 10 um Recommended Element Porosity Rating Porosity Color Recommended pplication Rating Code 40 um None Viscous Fluids (over 500 ssu) 30 um lack Med. Type Oils (225 to 500 ssu) 25 um rown Water & LT. Oils (30 to 25 ssu) 20 um Green Low Viscosity Fluids Fluids (under 30 ssu) 10 um Red 5 um Purple ir and Other Gases Materials: ody: 303 Grade Stainless Steel Element: 316 Grade Stainless Steel Max Operating Pressure: 300PSI Temperature: 35 to 392 F Part # Size /8" /4" /8" /2" /4" " MUFFLER W/ FLOW DJUSTMENT Materials: ody: rass Element: Sintered ronze Max Operating Pressure: 300PSI Temperature: 35 to 300 F Part # Size /8" /4" /8" /2" Phone:

305 PNEUMTICS PNEUMTICS HIGH FLOW LUMINUM MUFFLER LUMINUM HIGH FLOW MUFFLER SLIDING HND VLVES Materials: ody: luminum Element: 50 Mesh Stainless Steel Max Operating Pressure: 300PSI Temperature: 35 to 160 F Part # Size /8" /4" /8" /2" /4" " HIGH FLOW STEEL MUFFLER Materials: ody: luminum Element: 50 Mesh Stainless Steel Max Operating Pressure: 300PSI Temperature: 35 to 160 F Part # Size /8" /4" /8" /2" /4" " PLSTIC HIGH FLOW MUFFLER Materials: ody: Steel Element: 50 Mesh Stainless Steel Max Operating Pressure: 300PSI Temperature: 35 to 160 F Part # Size /8" /4" /8" /2" /4" " Materials: ody: lack Nylon Element:50 Mesh Stainless Steel Max Operating Pressure: 150PSI Temperature: 35 to 120 F Part # Size /8" /4" /8" /2" NIPPLE INLINE FILTER Materials: ody: rass Element: 40 Micron Sintered ronze Max Operating Pressure: 300PSI Temperature: 35 to 300 F Materials: ody: Zinc/ luminum Cover: Zinc Rotary Disk: Teflon Pressure Range: 0 to 140PSI Proof Pressure: 213 PSI Temperature: 41 F to 140 F Media: ir Valve Function: 4-Way, 3 Position Operation Method: Manually operated 90, Rotary Disk, Direct-cting type ody: Zinc Part # Size /4" ody: luminum /8" /2" REPIRLE IR/ OIL INLINE FILTER Materials: ody: nodized luminum Element: 40 Micron Sintered ronze Max Operating Pressure: 300PSI Temperature: 35 to 200 F Part # Size /8" /4" /8" /2" /4" PNEUMTICS Part # Size /8" /4" /8" /2" If the lessons of history teach us anything it is that nobody learns the lessons that history teaches us. - non. Fax: sales@global-hose.com 305

306 PNEUMTICS 306 MNIFOLDS Materials: luminum with black anodizing for corrosion resistance. Specifications: Max Operating Pressure: 1000PSI Temperature: -10 to 200 F Media: ir and liquids compatible with materials of construction. Part # Ports C D E F G H J K M R NPT NPT N/ /8" 1/4" N/ /4" 3/8" N/ /8" 3/8" N/ N/ 3 IN 1 LUMINUM IR MNIFOLD No need to connect and disconnect every time you want to change tools. Supply 3 air tools from one outlet. These manifolds have one inlet with three 1/4 outlets. S685-4 S685-6 S685-8 D3404 Phone: D3406 D Part # Size /4" Inlet /8" Inlet /2" Inlet three 1/4" Outlets SFETY LOW GUN N/P steel handle with plastic sleeve rass Valve Zinc body luminum nozzle /8" Outlet 90 PSI 20430D S148 D Part # Size /4" Inlet 7.67 THREDED PORTS Material ody: POM (engineering plastic) Nozzle: nickel plated carbon steel Features Simple construction, economic Global thread connection Durable and versatile applications 4 inch nozzle 150 PSI PISTOL GRIP LO-GUN Part # Size /4" 8.11 PNEUMTIC CCESSORIES RIGHT NGLE MNIFOLD Part # R R R R R R R R R R R R R R R R R R R R R R R R R R R RUER TIPPED NOZZLE D201RT 411R Makes positive seal between gun and fuel line or other openings. Use only on air line regulated to 30 PSI or less Part # Thread Size / HIGH FLOW SFETY NOZZLE SST10 411T 2056 Meets OSH regulations of 30 PSI maximum outlet pressure when line pressure is 150 PSI or less. Has an air pressure bypass which prevent build up of tip pressure even if nozzle is blocked. dapts to any blow gun with a 1/8 NPT nozzle port Part #

307 PNEUMTIC CCESSORIES MULTI-PURPOSE IR VENT 705 Part # Size /8" 2.99 RSS ICYCLE PUMP FITTING Screw on swivel chuck for most hand operated tire pumps. una-n-seal Deflator SWIVEL FITTING 360 Turning Swivels Male NPT x Female NPT Part # Size /4" 9.99 IR CHUCKS HEX LL FOOT CHUCK TNK & VENT VLVES Three standard styles of valve bodies, complete with short core, for air lifts, water pumps, vacuum, pressurized containers, air jacks, and other pneumatic devices. REGULR: 300 PSI and cracking pressure 80 PSI 1/8" NPT,.9" LONG SPRING CORD Thread - w/ lack cap.302 x 32 7/16 PNEUMTICS Part # REGULR 5.83 Part # Size /16" 2.88 Part # /4 FPT Live /8" NPT 1.207"LONG SPRING CORD 7/16 w/ lack cap INFLTOR LL FOOT CHUCK WITH 1/4 I.D. HOSE R Part # REGULR 5.24 Part # Size /16" 3.17 Part # /4 ID Live ir /16 1/4" NPT 1"LONG SPRING CORD w/ lack cap 360 Turning Swivel Fitting 1/4" asic size Industrial Interchange Plug 360 Turning Swivels DUL FOOT CHUCKS DTC l Part # REGULR 7.45 TNK VLVE CCESSORIES PNEUMTICS Part # Size /4" Part # LCK PLSTIC CP No Gasket NGLE CHUCK Part # Part # SHORT NICKEL PLTED DOME CP Dome skirted type Part # Fax: sales@global-hose.com 307

308 INTEGRL FILTER REGULTORS INTEGRL FILTER REGULTOR Combines air filter and pressure regulator into one compact unit. Non-rising, push-lock pressure adjustment knob provides easy hand adjustment at any pressure. djustment knob can be removed to provide tamper-resistance. luminum bowl guard standard. 20 micron sintered bronze filter. Pressure gauge and auto-drain are included. Convenient see-through bowl guard. uto-drain will automatically dispense contaminates collected by the filter, prevents overflow. ecause manual draining of filters is often overlooked in the normal industrial environment. Float type auto-drain has built-in filter screen to prevent clogging Internal float-type auto-drain. TECHNICL DT Model Number I280 I380 I480 PNEUMTICS Port Size NPTF 1/4" 3/8" 1/2" Max. ir supply PSI (15 kgf/cm 2 ) Max. Operating pressure 140 PSI (9.9 kgf/cm 2 ) Regulating range 7.0~120.0 PSI (0.5~8.5 kgf/cm 2 ) Pressure guage port size NPTF 1/8" 1/4" uto-drain port size NPT 1/8"M 1/8"F Nominal filtration rating 20UM Construction Relieving Type Operating temperature range 41 ~140 F( 5~60 C ) ody luminum onnet Poly ceta Diecast luminum Material Filter Element Sintered ronze owl Polycarbonate owl Guard luminum Weight LS Included accessory ( standard ) uto drain, Pressure gauge, Mounting bracket Part # Size Description I280 1/4" Integral Filter Regulator I380 3/8" Integral Filter Regulator I480 1/2" Integral Filter Regulator PNEUMTICS PRTS & CCESSORIES Part # Description Part # Description M280 Mounting racket (I280) Replacement owl (I280) M380 Mounting racket (I280/480) Replacement owl (I380) RN Retaining Nut (I280) 5.50 Replacement owl (I480) RN380 Retaining Nut (I280/480) 5.50 G280 Replacement owl & Guard (I280) G380 Replacement owl & Guard (I380) G280 Pressure Gauge (I280) G480 Replacement owl & Guard (I480) G380 Pressure Gauge (I280/480) G280 Replacement owl, Guard, uto Drain (I280) RF280 Replacement Filter Element (I280) G380 Replacement owl, Guard, uto Drain (I380) RF380 Replacement Filter Element (I280/480) G480 Replacement owl, Guard, uto Drain (I480) Phone:

309 PNEUMTICS CCESSORIES DUL NGLE-FOOT TRUCK PNEUMTIC SLIDE VLVES Max Operating Pressure: Temperatures: Fax: psig -20 F to +200 F Manually operated slide valves provide simple on/off airflow control. They can be mounted horizontally, vertically or at any angle. Open Position PENCIL GUGE High pressure PSI, in 2lb unit Part # DUL STRIGHT-FOOT PENCIL GUGE Identical to above except has straight chuck with 30 0 reverse angle chuck. Part # MLE X FEMLE Part # Size L /8" /16" 8.43 L STNDRD DRY GUGES STEEL CSE LOWER PRICES ll the gauges supplied by us are designed for long, reliable service under rugged conditions. Typical applications include compressors, filter regulators, water pumps, beverage dispensing equipment, hydraulic and pneumatic systems, and other applications, where the media does not corrode brass 2 FCE 1/4 LOWER MOUNT Part # PSI LOWER PRICES 2-1/2 FCE 1/4 LOWER MOUNT Part # PSI GUGES LIQUID FILLED GUGES STINLESS CSE Liquid filled gauges enhance the reliability and integrity of the measuring system for long periods. The glycerine filling helps dampen the effects of vibration and pulsation. It also lubricates the movement which extends the life of the gauge. Liquid Filled Gauges with a stainless case are used for protection in harsh environments. Stainless Steel Case Copper lloy Wetted parts Polycarbonate window + 1.5% of span accuracy 2-1/2 FCE 1/4 LOWER MOUNT Part # PSI Vacuum /2 FCE 1/4 CENTER CK MOUNT Part # PSI Part # PSI /2 & 2 S also available 4 FCE 1/4 LOWER MOUNT LOWER PRICES LOWER PRICES Part # PSI Other Gauges available upon request...just sk! sales@global-hose.com 309 PNEUMTICS

310 CCESSORIES CCESSORIES TEFLON TPE Chemical Properities: Min. of 99% Polytrafluoroethelene Thickness:.0035, or Elongation: Min. of 50% (most times it far exceeds) Width: Nominal width +0.02, Length: Nominal length + 20, -0 Density: to 0.40 Incompatibility: void using on Moten lkali, certain Halogen products & Flourine at high temperatures and pressures Temperature: When heated to over 260 degrees Centigrade, it will thermally degrade and decompose and produce toxic fumes. Government standard: Meets military specification T-27730a Usage: To be used on all types of threaded fittings for passage of water; potable and non-potable, most chemicals, oxygen, gas, hydraulic and high pressure lines. COPPER FITTING RUSHES Extra thick mass of steel wire insures perfect cleaning job with minimum effort. Twisted wire handle - for copper fittings. Carbon steel brush Sold in boxes of 12 only Part # Size /8" /2" /4" " 4.76 SCRUS IN UCKET If you don't make mistakes, you're not working on hard enough problems. nd that's a big mistake. - Frank Wilczek The bad news is time flies. The good news is you're the pilot. TEFLON TPE - Michael lthsuler Thread Sealant PNEUMTICS MISC Part # Size /2" x 260" /2" x 520" /4" x 260" /4" x 520" 1.92 POP OUT COVERED SPOOL Truly portable Scrubs in a ucket provide, fast, easy and effective hand cleaning. Can be used anywhere, anyplace, anytime on the toughest soils, greases, tar, etc. Each dispensing canister contains 10-1/2 x 12-1/4 perforated absorbent cleaning towels. Containing a germ-fighting chemical known as Triclosan. No rinsing, no drying, no residue. lso can be used for cleaning tools and spills. On-thespot hand cleaning when there is no sink around. Part # PSI Scrubs TM /container Scrubs TM /container You can tell whether a man is clever by his answers. You can tell whether a man is wise by his questions. - Naguib Mahfouz Phone:

311 STINLESS FITTINGS 1/4" SWIVEL NUT (NICKEL PLTED RSS) EVERGE FITTINGS SWIVEL ELOWS 90 SWIVEL ELOW STINLESS STEEL Part # SWIVEL HOSE STEM FOR 1/4" SWIVEL NUT HOSE ID x FEMLE 45 FLRE Part # Size /4" x 1/4" /8" x 3/8" STINLESS STEEL R SPLICERS HOSE SPLICER (STRIGHT) STINLESS STEEL Part # /8" SWIVEL NUT (NICKEL PLTED RSS) ID HOSE Part # Size /4" /8" /8" x 1/4" R SPLICER STINLESS STEEL Part # SWIVEL HOSE STEM FOR 3/8" SWIVEL NUT STINLESS STEEL ID HOSE Part # Size /4" /8" 6.39 TEES & CROSSES R HOSE TEES STINLESS STEEL PNEUMTICS MISC Part # ID HOSE Part # Size /4" /8" Fax: sales@global-hose.com 311

312 EVERGE FITTINGS DPTERS MLE FLRE TO R DPTER STINLESS FITTINGS DPTERS NPT ELOWS STINLESS STEEL STINLESS STEEL HOSE ID x 45 FLRE Part # Size /4" x 1/4" /4" x 3/8" /8" x 1/4" /8" x 3/8" 7.20 NPT TO R DPTER HOSE ID x MLE NPTF Part # Size /4" x 1/8" /8" x 1/4" /8" x 3/8" /2" x 1/2" STINLESS STEEL HOSE ID x MLE NPTF Part # Size /4" x 1/8" /4" x 1/4" /4" x 3/8" /8" x 1/8" /8" x 1/4" /8" x 3/8" /8" x 1/2" /2" x 3/4" Please call us for any stainless steel beverage fittings If you don't see what you need, ask us! MISC SWIVEL ELOWS SWIVEL TO R ELOW STINLESS STEEL HOSE ID x FEMLE 45 FLRE Part # Size /4" x 1/4" Phone:

313 HYDRULIC DPTERS STEEL PIPE SWIVELS NPSM Conformance SE J Degree Chamfers - Most NPSM pipe swivel union fittings have 30-degree chamfers on NPTF male end of fittings. This chamfer is optional per SE J514. If chamfer is mandatory, consult with our customer service department to verify chamfer exists on items you are requesting. Temperature Range: F to F Materials.Steel - Carbon steel trivalent chrome plating per STM (Type II SC-2). Torque Values: The torque values provide benchmarks that we believe give optimum results for leak free connections. ctual torque values should be based on individual applications. Caution: NPSM pipe swivel unions are not designed to provide structural support for other components Working Pressures The following table lists the recommended working pressures for steel NPSM pipe swivel union hydraulic fittings made in accordance with SE standard J514. Many factors such as impulsing, vibration, mechanical shock and overtightening may affect the integrity of the fitting and swivel union connection. For these reasons, the recommended working pressures are actually lower than the capacity of the fittings. SE recommends sufficient testing to be conducted to assure that performance levels will be safe and satisfactory, especially if installed in systems operating at elevated pressures or in severe conditions. When using fittings with different size or thread type, use the lower pressure rating of the two threads. SE J514 NPSM Pressure Ratings Dash NPSM 4 TO 1 Minimum Size Thread Size urst PSI -2 1/ / / / / / /4-11 1/ /2-11 1/ / Steel pipe swivel ssembly Instructions Recommended Step 1. Inspect male pipe fitting connecting to swivel and confirm that it has an internal 30-degree chamfer. Do not install into union if chamfer is missing. Step2. Lubricate the threads and the entire chamfered area of male fitting with hydraulic fluid or other light weight lubricant. Step 3. Install lubricated pipe fitting into swivel nut and turn nut until finger tight. Step 4. Place wrench on hex of male fitting to prevent male fitting from turning, and torque swivel nut to the values in the following table. Caution: When torquing swivel nut on straight swivel union fittings, it may be necessary to also place a wrench on the fitting wrench pad to prevent the fitting from backing out of its port while torquing the swivel nut. Dash NPSM Torque Size Thread Size Foot/LS -2 1/ / / / / / /4-11 1/ /2-11 1/ /2 300 lternate ssembly Method Step1. If torque method not possible, follow steps 1-3 above, then proceed to the steps below. Step 2. Place wrench on hex of male pipe fitting and consider this wrench in the 12 o clock position. Step 3. Lightly wrench tighten the swivel union nut so that the wrench is as near the 3 o clock position as possible. Step 5. Rotate wrench in 3 o clock position counterclockwise to no less than the 1 o clock position, but no more than the 12 o clock position. Why wet Torque? Due to the difference in plating types and thickness, materials, and thread quality of different components, the coefficient of friction varies greatly on any given assembly. Lubrication not only produces a more consistent coefficient of friction, it increases clamping force on sealing area with less torque on the threads. Overtightening causes threads to yield, deform and lose their ability to maintain an adequate load or clamping force on the seating area. Extended operation and severe conditions cause further yielding which results in leaks. Overtightening is the single greatest cause for leaks in metal to metal seat hydraulic connections. It is our firm position, that to not wet torque, is to compromise consistency and quality for convenience. HYDRULIC Fax: sales@global-hose.com 313

314 STEEL PIPE SWIVELS NPSM STEEL PIPE SWIVEL DPTERS SE male pipe swivel adapter 1 2 lso available in Stainless Steel More sizes available -vailable in a Restrictor R R 0107 Part # Male Female Pipe 1 NPSM /8 1/ /8 1/ /4 1/ /4 1/ /4 3/ /4 1/ /8 1/ /8 3/ /8 1/ /2 1/ /2 3/ /2 1/ /2 3/ /4 3/ /4 1/ /4 3/ / / / / / /4 1-1/ /2 1-1/ HYDRULIC DPTERS female pipe swivel adapter SE R R C207 Part # Female Female Pipe 1 NPSM /8 1/ /8 1/ /4 1/ /4 1/ /4 3/ /8 1/ /8 3/ /8 1/ /2 1/ /2 3/ /2 1/ /4 3/ / /4 1-1/ lso available in Stainless Steel More sizes available...just ask! Watch your thoughts; they become words. Watch your words; they become actions. Watch your actions; they become habits. Watch your habits; they become character. Watch your character; it becomes your destiny. - Lao-Tze The third-rate mind is only happy when it is thinking with the majority. The second-rate mind is only happy when it is thinking with the minority. The first-rate mind is only happy when it is thinking... Milne HYDRULIC 314 Phone:

315 HYDRULIC DPTERS male pipe elbow swivel adapter SE R R Part # Male Female Pipe 1 NPSM /8 1/ /8 1/ /4 1/ /4 1/ /4 3/ /8 1/ /8 3/ /8 1/ /8 3/ /2 1/ /2 3/ /2 1/ /2 3/ /4 3/ /4 1/ /4 3/ / / / / /4 3/ / /4 1-1/ /4 1-1/ /2 1-1/ /2 1-1/ lso available in Stainless Steel More sizes available -vailable in a Restrictor- extra long male pipe elbow 2 1 STEEL PIPE SWIVELS NPSM FEMLE UNION ELOW SWIVEL DPTER SE SSR 1 Part # Female Female Pipe 1 NPSM /8 1/ /8 1/ /4 1/ /4 1/ /4 3/ /8 1/ /8 3/ /8 1/ /2 1/ /2 3/ /2 1/ /2 3/ /4 1/ /4 3/ / / /4 1-1/ /2 1-1/ lso available in Stainless Steel More sizes available The butcher backed into the meat grinder and got a little behind in his work. No matter how much you push the envelope, it'll still be stationary. dog gave birth to puppies near the road and was cited for littering. Part # Male Female Pipe 1 NPSM LL-4-4 1/4 1/ LL-6-6 3/8 3/ LL-8-8 1/2 1/ LL /4 3/ LL grenade thrown into a kitchen in France resulted in linoleum blownapart. HYDRULIC Fax: sales@global-hose.com 315

316 STEEL PIPE SWIVELS NPSM male 45 pipe elbow swivel adapter SE R R HYDRULIC DPTERS male swivel RNCH tee R R Part # Male Female Pipe 1 NPSM /8 1/ /8 1/ /4 1/ /4 1/ /4 3/ /8 1/ /8 3/ /8 1/ /2 1/ /2 3/ /2 1/ /2 3/ /4 3/ /4 1/ /4 3/ / / / / /4 1-1/ /2 1-1/ lso available in Stainless Steel More sizes available Part # Female NPSM 1 & 2 Male Pipe /8 1/ /4 1/ /4 3/ /8 3/ /2 3/ /4 1/ /8 1/ /2 1/ /2 3/ /4 3/ / /4 1-1/ /2 1-1/ female swivel tee R R HYDRULIC female 45 UNION ELOW SwIVEL DPTER SE lso available in Stainless Steel More sizes available R R Part # Female Female Pipe 1 NPSM /8 1/ /4 1/ /8 1/ /8 3/ /2 3/ /2 1/ /4 3/ /4 1-1/ /2 1-1/ Part # Female NPSM 1 & 2 Female Pipe /8 1/ /4 1/ /4 3/ /8 3/ /8 1/ /2 1/ /2 3/ /4 3/ / /4 1-1/ /2 1-1/ Phone:

317 HYDRULIC DPTERS female swivel union TEE R Part # Female NPSM 1,2 & / / / / / / WHY GOD MDE MOMS nswers given by 2nd grade school children to the following questions: Why did God make mothers? 1. She's the only one who knows where the scotch tape is. 2. Mostly to clean the house. 3. To help us out of there when we were getting born. How did God make mothers? 1. He used dirt, just like for the rest of us. 2. Magic plus super powers and a lot of stirring. 3. God made my mom just the same like he made me. He just used bigger parts. STEEL PIPE SWIVELS NPSM What did mom need to know about dad before she married him? 1. His last name. 2. She had to know his background. Like is he a crook? Does he get drunk on beer? 3. Does he make at least $800 a year? Did he say NO to drugs and YES to chores? Why did your mom marry your dad? 1. My dad makes the best spaghetti in the world. nd my mom eats a lot. 2. She got too old to do anything else with him. 3. My grandma says that mom didn't have her thinking cap on. Who's the boss at your house? 1. Mom doesn't want to be boss, but she has to because dad's such a goof ball. 2. Mom. You can tell by room inspection. She sees the stuff under the bed. 3. I guess mom is, but only because she has a lot more to do than dad. What's the difference between moms and dads? 1. Moms work at work and work at home and dads just go to work at work. 2. Moms know how to talk to teachers without scaring them. 3. Dads are taller and stronger, but moms have all the real power 'cause that's who you got to ask if you want to sleep over at your friends. 4. Moms have magic, they make you feel better without medicine. What ingredients are mothers made of? 1. God makes mothers out of clouds and angel hair and everything nice in the world and one dab of mean. 2. They had to get their start from men's bones. Then they mostly use string, I think. Why did God give you your mother and not some other mom? 1. We're related. 2. God knew she likes me a lot more than other people's mom like me. What kind of a little girl was your mom? 1. My mom has always been my mom and none of that other stuff. 2. I don't know because I wasn't there, but my guess would be pretty bossy. 3. They say she used to be nice. What does your mom do in her spare time? 1. Mothers don't do spare time. 2. To hear her tell it, she pays bills all day long. What would it take to make your mom perfect? 1. On the inside she's already perfect. Outside, I think some kind of plastic surgery. 2. Diet. You know, her hair. I'd diet, maybe blue. If you could change one thing about your mom, what would it be? 1. She has this weird thing about me keeping my room clean. I'd get rid of that. 2. I'd make my mom smarter. Then she would know it was my sister who did it not me. 3. I would like for her to get rid of those invisible eyes on the back of her head. HYDRULIC Fax: sales@global-hose.com 317

318 37 JIC DPTERS HYDRULIC DPTERS 37 0 JIC DPTERS Straights Pg Shapes Pg ulkheads Pg Female Swivels Pg O-Ring Fittings Pg Conformance SE J514 MS51500-MS51534 Temperature Range: F to F Materials Carbon Steel trivalent zinc plating Working Pressures The following table lists the recommended working pressures for steel 37 0 flare hydraulic tube fittings manufactured in accordance with SE standard J514. Many factors such as impulsing, vibration, mechanical shock, and overtightening may affect the integrity of the fitting connection. For these reasons, the recommended working pressures are actually lower than the capacity of the fittings. SE recommends sufficient testing to be conducted to assure that performance levels will be safe and satisfactory, especially if installed in systems operating at elevated pressures or in severe conditions. When using fittings with different size or thread type, use the lower pressure rating of the two threads FLRED FITTING ssembly Instructions Caution: 37-Degree flared fittings are not designed to provide structural support for other components. SE J Degree Flared fittings pressure rating Dash Flared 4 TO 1 Minimum Size Thread Size urst PSI -2 5/ / / / / / / / / / / / / HYDRULIC Recommended Step 1.Inspect for possible contamination or damage from shipping or handling. Sealing surface should be smooth. nnular tool marks of (100uin) concentric with thread permissible. Step2. Lubricate the threads and the entire surface of the cone with hydraulic fluid or a light lubricant. Step 3. lign mating components for hand connection and turn flare nut until sealing surfaces make full contact. Step 4. Torque nut to the values shown on the following table. If a wrench pad is provided next to nut, place a second wrench on pad to prevent flare from rotating while being torqued. Step 5. When torquing nut onto a straight flared fitting, it may be necessary to also place a wrench on the flared fitting wrench pad to prevent it from turning during assembly. Dash Flared Thread Torque Size Size Foot/Lbs. -2 5/ / / / / / /8-1/ / / / / / / lternate ssembly Method Step1. If torque method not possible, follow steps 1-3 above, then proceed to the steps below. Step 2. Lightly wrench tighten the nut until there is firm resistance. Step 3. Place a wrench on wrench pad next to nut as near the 6 o clock position as possible. Step 4. Place second wrench on nut as near the 3 o clock position as possible. Step 5. Turn nut clockwise to no less than the 4 o clock position and no more than the 6 o clock position. Required rotation generally decreases as size increases. Why wet Torque? Due to the difference in plating types and thickness, materials, and thread quality of different components, the coefficient of friction varies greatly on any given assembly. Lubrication not only produces a more consistent coefficient of friction, it increases clamping force on sealing area with less torque on the threads. Overtightening causes threads to yield, deform and lose their ability to maintain an adequate load or clamping force on the seating area. Extended operation and severe conditions cause further yielding which results in leaks. Overtightening is the single greatest cause for leaks in metal to metal seat hydraulic connections. It is our firm position, that to not wet torque, is to compromise consistency and quality for convenience. 318 Phone:

319 HYDRULIC DPTERS STEEL 37 0 JIC FLRE TUE FITTINGS JIC short tube nut Part # Tube O.D JIC Thread Size /4 7/ /8 9/ /2 3/ /8 7/ /4 1-1/ / /4 1-5/ /2 1-7/ STRIGHTS STEEL 37 JIC FLRE SE MS JIC CP FNTX 1329 C5129 Part # Tube O.D. JIC Thread Size 0304-C-2 1/8 5/ C-3 3/16 3/ C-4 1/4 7/ C-5 5/16 1/ C-6 3/8 9/ C-8 1/2 3/ C-10 5/8 7/ C-12 3/4 1-1/ C-14 7/8 1-3/ C / C /4 1-5/ C /2 1-7/ C / SE Long JIC TUE NUT Some available in Stainless Steel Part # Tube JIC Thread O.D Size /4 7/ /16 1/ /8 9/ /2 3/ /8 7/ /4 1-1/ /8 1-3/ / /4 1/5/ /2 1-7/ / The roundest knight at King rthur's round table was Sir Circumference. He acquired his size from too much pi. I thought I saw an eye doctor on an laskan island, but it turned out to be an optical leutian. She was only a whiskey maker, but he loved her still. rubber band pistol was confiscated from algebra class because it was a weapon of math disruption. HYDRULIC Fax: sales@global-hose.com 319

320 STRIGHTS STEEL 37 JIC FLRE SE MS JIC tube nut (sleeve required) lso available in Stainless Steel TX 1311 C5105 Part # Tube JIC Thread O.D Size /8 5/ /16 3/ /4 7/ /16 1/ /8 9/ /2 3/ /8 7/ /4 1-1/ /8 1-3/ / /4 1-5/ /2 1-7/ / HYDRULIC DPTERS JIC braze tube union Part # raze JIC Thread Port 1 Size /4 7/ /8 9/ /2 3/ /8 7/ /4 1-1/ /8 1-3/ / /4 1-5/ /2 1-7/ / SE MS JIC tube sleeve TX 1253 C5165 HYDRULIC Part # Tube O.D / / / / / / / / / / / lso available in Stainless Steel Everything you want should be yours: the type of work you want; the relationships you need; the social, mental, and aesthetic stimulation that will make you happy and fulfilled; the money you require for the lifestyle that is appropriate to you; and any requirement that you may (or may not) have for achievement or service to others. If you don t aim for it all, you ll never get it all. To aim for it requires that you know what you want - Richard Koch 320 Phone:

321 HYDRULIC DPTERS SE MS JIC tube union 1 2 Some sizes available in Stainless Steel More jump sizes available JIC large hex tube union HTX 1204 C5305 Part # JIC Thread Size 1 JIC Thread Size / / /8-24 3/ / / /2-20 1/ / / / / / / /4-16 3/ /4-16 7/ /4-16 9/ /8-14 7/ /8-14 7/ /8-14 9/ /8-14 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / LH LHTX 1204-LH C5306 Part # JIC Thread Size 1 JIC Thread Size LH-4 7/ / LH-6 9/ / LH-8 3/4-16 3/ LH-10 7/8-14 7/ LH / / LH / / LH / / STRIGHTS STEEL 37 JIC FLRE SE MS JIC male connector R FTX 1202R C5205 Part # JIC Thread MalePipe Size 1 Thread / / / / /8-24 1/ /8-24 1/ / / / / / / / / /2-20 1/ /2-20 1/ /2-20 3/ / / / / / / / / / / /4-16 1/ /4-16 3/ /4-16 1/ /4-16 3/ / /8-14 1/ /8-14 3/ /8-14 1/ /8-14 3/ / / / / / / / / / / / / / / / / / / / / /8-12 3/ / / / / / / / / / / / / / / / / / / Some sizes available in Stainless Steel -vailable in a Restrictor- HYDRULIC Fax: sales@global-hose.com 321

322 STRIGHTS STEEL 37 JIC FLRE JIC LONG MLE CONNECTOR SE MS L R 1202L0R Part # JIC Male Pipe Length Thread Size 2 Size L-4-2 7/ /8" 1.81" L-4-4 7/ /4" 2.35" L-6-4 9/ /4" 2.35" L-6-6 9/ /8" 2.50" L-8-6 3/4-16 3/8" 2.75" L-8-8 3/4-16 1/2" 3.13" L /8-14 1/2" 3.13" L / /4" 3.50" L / " 4" lso available in extra long lengths Five (5) lessons about the way we treat people Third Important Lesson - lways remember those who serve. In the days when an ice cream sundae cost much less, 10-year-old boy entered a hotel coffee shop and sat at a table. waitress put a glass of water in front of him. "How much is an ice cream sundae?" he asked. "Fifty cents," replied the waitress. The little boy pulled his hand out of his pocket and studied the coins in it. "Well, how much is a plain dish of ice cream?" he inquired. y now more people were waiting for a table and the waitress was growing impatient.. SE MS HYDRULIC DPTERS JIC female connector 1 2 Some sizes available in Stainless Steel JIC two piece tube reducer R GTX 1230R C5255 Part # JIC Thread Size 1 Female Pipe Size / / /8-24 1/ /8-24 1/ / / / / / / /2-20 1/ /2-20 1/ / / / / / / / / /4-16 1/ /4-16 3/ /4-16 1/ /4-16 3/ /8-14 3/ /8-14 1/ /8-14 3/ / / / / / / / / / / / / / / / / / HYDRULIC "Thirty-five cents," she brusquely replied. The little boy again counted his coins. "I'll have the plain ice cream," he said. The waitress brought the ice cream, put the bill on the table and walked away The boy finished the ice cream, paid the cashier and left.. When the waitress came back, she began to cry as she wiped down the table. There, placed neatly beside the empty dish, Were two nickels and five pennies.. You see, he couldn't have the sundae, because he had to have enough left to leave her a tip. 1 2 Part # JIC Female Tube O.D 1 JIC Male Thread /8 7/ /2 7/ /2 9/ /4 9/ /4 3/ / /4 1-5/ /2 1-5/ Phone:

323 HYDRULIC DPTERS JIC reducer/ Expander 2406 C TRTX 1246 Part # JIC Thread Size 1 JIC Thread Size / / / / /4-16 7/ /4-16 9/ * 3/ / /8-14 7/ /8-14 9/ /8-14 3/ / / / / / / / / * 1-1/ / / / / / / / / / / / / / / / / / / / / / * 1-5/ / /8-12 3/ / / / / / / / / / / *Tube Expander More expanding sizes available SE MS SE MS STRIGHTS STEEL 37 JIC FLRE plug Jic union elbow PNTX 1254 C5229 Part # Tube O.D. JIC Thread Size /8 5/ /16 3/ /4 7/ /16 1/ /8 9/ /2 3/ /8 7/ /4 1-1/ /8 1-3/ / /4 1-5/ /2 1-7/ / Some available in Stainless Steel C5505 Part # JIC Thread Size 1 JIC Thread Size / / / / /2-20 1/ / / / / /4-16 3/ /4-16 7/ /4-16 9/ /8-14 7/ /8-14 3/ / / / / / / / / / / / / / / / / Some available in Stainless Steel More sizes available HYDRULIC Fax: sales@global-hose.com 323

324 HYDRULIC SHPES STEEL 37 JIC FLRE SE MS STEEL 37 JIC FLRE SHPES JIC male elbow 1 Some sizes available in Stainless Steel R C R CTX Part # JIC Male Pipe Size 1 Size / / / / /8-24 1/ /8-24 1/ / / / / / / / / /2-20 1/ /2-20 1/ /2-20 3/ / / / / / / / / / / /4-16 1/ /4-16 3/ /4-16 1/ /4-16 3/ / /8-14 3/ /8-14 1/ /8-14 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / SE HYDRULIC DPTERS JIC elbow restrictor 1 Part # JIC Size 1 Male Pipe Size 2 Restriction 2501-RS-4-4 7/ / RS-6-6 9/ / RS-6-8 9/ / LONG MLE ELOW 1 * Length = mid-jic to end of threads lso available in Stainless Steel R CCTX 1208-LR C5425 Part # JIC Size 1 Male Pipe Size 2 Length* 2501-L-4-2 7/ / L-4-4 7/ / L-5-2 1/2-20 1/ L-5-4 1/2-20 1/ L-6-2 9/ / L-6-4 9/ / L-6-6 9/ / L-8-4 3/4-16 1/ L-8-6 3/4-16 3/ L-8-8 3/4-16 1/ L /8-14 1/ L / / L / / L / / L / L / / L / / Phone:

325 HYDRULIC DPTERS JIC EXTR-LONG MLE ELOW SE JIC extra extra long male elbow 2501LLL R LL R CCCTX 1208-LLR C5435 Part # JIC Size 1 Male Pipe Size 2 Length* 2501-LL-4-2 7/ / LL-4-4 7/ / LL-5-4 1/2-20 1/ LL-6-2 9/ / LL-6-4 9/ / LL-6-6 9/ / LL-8-4 3/4-16 1/ LL-8-6 3/4-16 3/ LL-8-8 3/4-16 1/ LL /8-14 1/ LL / / LL / / LL / / LL / LL / / LL / / Part # JIC Size 1 Male Pipe Size 2 Length* 2501-LLL-4-2 7/ / LLL-4-4 7/ / LLL-6-4 9/ / LLL-6-6 9/ / LLL-8-6 3/4-16 3/ LLL-8-8 3/4-16 1/ LLL /8-14 1/ LLL / / LLL / SE MS SHPES STEEL 37 JIC FLRE JIC male elbow SWIVEL 1 JIC FEMLE ELOW swivel for installation only Part # JIC Thread Size 1 Male Pipe Size S-4-4 7/ / S-6-4 9/ / S-6-6 9/ / S-8-6 3/4-16 3/ S-8-8 3/4-16 1/ S /8-14 1/ S / / R DTX 1240R C5455 Part # JIC Thread Size 1 Female Pipe Size / / / / / / /2-20 1/ /2-20 1/ / / / / / / / / /4-16 1/ /4-16 3/ /4-16 1/ /4-16 3/ /8-14 3/ /8-14 1/ / / / / / / / / / / / / / / * Length = mid-jic to end of threads lso available in Stainless Steel HYDRULIC Fax: sales@global-hose.com 325

326 SHPES STEEL 37 JIC FLRE SE MS JIC MLE 45 ELOW 1 JIC 45 UNION ELOW R VTX 1206R C5355 Part # JIC Thread Male Pipe Size 1 Size / / /8-24 1/ / / / / / / /2-20 1/ /2-20 1/ / / / / / / / / / / /4-16 1/ /4-16 3/ /4-16 1/ /4-16 3/ /8-14 3/ /8-14 1/ /8-14 3/ / / / / / / / / / / / / / / / / / / / / / Some sizes available in Stainless Steel HYDRULIC DPTERS JIC 45 FEMLE ELOW 1 2 More sizes available JIC MLE RNCH TEE R Part # JIC Thread Size 1 Female Pipe Size / / /4-16 3/ /8-14 1/ / / R STX 1221R C5605 Part # JIC Thread Size 1&2 Pipe Thread Size / / /8-24 1/ / / / / /2-20 1/ /2-20 1/ / / / / /4-16 3/ /4-16 1/ /8-14 3/ /8-14 1/ / / / / / / / / / / / / / / HYDRULIC Part # JIC Thread Size 1 JIC Thread Size / / /4-16 3/ /8-14 7/ / / / / / / lso available in Stainless Steel 326 Phone:

327 HYDRULIC DPTERS SE MS SE MS JIC female branch tee JIC union tee R OTX 1228R C6566 Part # JIC Thread Size 1 & 2 Female Pipe Size /8-24 1/ / / / / /2-20 1/ / / / / /4-16 1/ / / / / / / / / / / JTX 1220 C5705 Part # JIC Thread Size 1 & 2 JIC Thread Size / / /8-24 3/ / / /2-20 1/ / / /4-16 3/ /8-14 7/ / / / / / / / / / / / / SE MS SE MS SHPES STEEL 37 JIC FLRE STEEL ULKHED FITTINGS * Lock Nut no longer included on fittings JIC ULKHED UNION 1 2 * Lock Nuts sold separately WLN 1332 C5624 Part # Thread Size / / / / / / / / / / / R WTX 1260 C5325 Part # JIC Thread JIC Thread Size 1 Size / / /2-20 1/ / / /4-16 3/ /8-14 7/ / / / / / / / / / / / / * Lock Nuts sold separately JIC ULKHED UNION ELOW 2701 SE R MS WETX C5525 Part # JIC Thread Size 1 JIC ulkhead Thread / / /2-20 1/ / / /4-16 3/ /8-14 7/ / / / / / / / / HYDRULIC Fax: sales@global-hose.com 327

328 SHPES STEEL 37 JIC FLRE SE MS SE MS JIC ULKHED UNION 45 ELOW JIC ULKHED RNCH TEE WNTX 1261 C5375 Part # JIC Thread Size 1 JIC Thread Size / / / / /4-16 3/ /8-14 7/ / / / / / / WJT 1283 C5725 HYDRULIC DPTERS JIC to female pipe bulkhead WGTX C Part # JIC Thread Size 1 Female Pipe Size / / / / /2-20 1/ / / / / /4-16 3/ /4-16 1/ /8-14 1/ / / / / / / / JIC to male pipe bulkhead HYDRULIC Part # JIC Thread Size 1&2 JIC Thread Size / / / / /4-16 3/ /8-14 7/ / / / / / / SE MS JIC ULKHED RUN TEE WJJT 1284 C5726 Part # JIC Thread JIC Thread Size 1&3 Size / / / / /4-16 3/ /8-14 7/ / / / / Part # JIC Thread Size 1 Pipe Thread Size / / / / / / / / /4-16 3/ /4-16 1/ /8-14 1/ / / / / / / / * Lock Nuts sold separately - pg Phone:

329 HYDRULIC DPTERS Steel PIPE DPTERS Conformance SE J514 for hex nipples, expanders, elbows, tees and crosses..se J514, J530 and J531 for bushings and plugs. Temperature Range: F to F Materials.Steel- SE 12L14 carbon steel trivalent zinc plated or bright silver finish. STYLES arstock Forged.Chamfered - male ends have an internal 30-degree chamfer to mate with NPSM female swivel union connections. Many pipe fittings do not have this chamfer, as it is not required per SE J514 standard. Caution: lthough most pipe fittings have sufficient structural integrity to support the weight of many components, consult our technical support department for guidance in selection of parts for this purpose Step 1.Inspect port and fitting to ensure that both are free of contaminants and excessive burrs and nicks. Step2. pply a stripe of an anaerobic liquid pipe sealant around the male threads leaving the first two threads uncovered. If no liquid sealant is available, wrap Teflon tape 1 1/2 to 2 turns in a clockwise direction, viewed from the pipe end, leaving the first two threads uncovered. Caution: Teflon tape and some pipe sealants are destructive to hydraulic components. lways use extreme caution and follow manufacturers recommendations for proper application of any sealant in order to prevent contamination Step 3. Screw finger tight into the port. Step 4. Wrench tighten the fitting to the correct turns past finger tight position. (See following table) When installing elbows or tees, consider final orientation position as to not exceed the recommended TPFT Caution: Never back off an installed pipe fitting to achieve proper alignment. Loosening installed pipe fittings will corrupt the seal and contribute to leakage and failure. Dash NPTF Turns Past Size Thread Size Finger Tight -1 1/ / / / / / / /4-11-1/ /2-11-1/ / NPTF dry seal pipe ssembly Instructions STEEL PIPE FITTINGS Working Pressures The following table lists the recommended working pressures for steel NPTF hydraulic pipe fittings manufactured in accordance with SE standard J514. Many factors such as number of threads engaged, impulsing, vibration, mechanical shock, removal and reassembly, thermal expansion and contraction may affect the integrity of the fitting or fitting connection. For these reasons, the recommended working pressures are actually lower than the capacity of the fittings. SE recommends sufficient testing to be conducted to assure that performance levels will be safe and satisfactory, especially if installed in systems operating at elevated pressures or in severe conditions. SE J514 NPTF PIPE WORKING PRESSURES Dash NPTF 4 TO 1 Minimum Size Thread Size urst PSI -1 1/ / / / / / / /4-11-1/ /2-11-1/ /2 750 Torque installation of pipe fittings is not a recommended practice. Thread taper and quality, different port and fitting materials, plating thickness and types, varying threads sealants, orientation, and other factors reduce the reliability of a torqued connection. If torque installation is required, refer to the following table for suggested torque values. Dash NPTF Torque Size Thread Size Foot/LS -2 1/ / / / / / /4-11-1/ /2-11-1/ /2 300 See STRIGHT THRED O-RING FITTING SEC- TION for assembly instructions and torque values for HYDRULIC Fax: sales@global-hose.com 329

330 HYDRULIC STEEL PIPE FITTINGS SE JIC ULKHED RUN TEE GG 1273 C3309 Part # Female Pipe 1 Female Pipe /8 1/ /4 1/ /4 1/ /8 1/ /8 3/ /2 1/ /2 3/ /2 1/ /4 3/ /4 1/ /4 3/ / / /4 1-1/ /2 1-1/ SE HEX PIPE FITTINGS FF 1252 C3069 Part # Male Pipe 1 Male Pipe /8 1/ /4 1/ /4 1/ /8 1/ /8 1/ /8 3/ /2 1/ /2 3/ /2 1/ /4 3/ /4 1/ /4 3/ / /4 3/ / /4 1-1/ /2 3/ / /2 1-1/ /2 1-1/ / SE HYDRULIC DPTERS EXPNDING PIPE DPTER FG-(R) 1274 C3209(R) Part # Male Female Pipe 1 Pipe /8 1/ /8 1/ /8 3/ /4 1/ /4 3/ /4 1/ /8 3/ /8 1/ /2 1/ /2 3/ / /4 3/ / /4 1-1/ / /4 1-1/ /4 1-1/ /2 1-1/ / Have you ever noticed? nybody going slower than you is an idiot, and anyone going faster than you is a maniac. - George Carlen Man can always be relied upon to exert, with vigour, his... right to be stupid - Dean Koontz 330 Phone:

331 HYDRULIC DPTERS HEX REDUCER USHING PTR 1250 C3109 Part # Male Pipe Female Pipe /4 1/ /8 1/ /8 1/ /2 1/ /2 1/ /2 3/ /4 1/ /4 1/ /4 3/ /4 1/ / / / / /4 1/ /4 3/ /4 1/ /4 3/ / /2 3/ /2 1/ /2 3/ / /2 1-1/ / / / SE STEEL PIPE FITTINGS Hollow hex plug Part # Male Pipe 5406-HHP-1 1/ HHP-2 1/ HHP-4 1/ HHP-6 3/ HHP-8 1/ HHP-12 3/ HHP HHP / HHP / HHP FLUSH HOLLOW HEX PLUG W/ 7/8 TPER Part # Male Pipe 5406-FLP-1 1/ FLP-2 1/ FLP-4 1/ FLP-6 3/ FLP-8 1/ FLP-12 3/ Some sizes available in Stainless Steel lso available in short pattern SQURE HED plug SE SE E hex head plug 5406P 2082 HP 1251 C3159 Part # Male Pipe 5406-P-2 1/ P-4 1/ P-6 3/ P-8 1/ P-12 3/ P P / P / P Part # Male Pipe 5406-SHP-2 1/ SHP-4 1/ SHP-6 3/ SHP-8 1/ SHP-12 3/ SHP SHP / SHP / SHP HYDRULIC Fax: lso available in Stainless Steel sales@global-hose.com 331

332 STEEL PIPE FITTINGS PIPE CP HYDRULIC DPTERS 45 male elbow Part # Female Pipe 5406-C-2 1/ C-4 1/ C-6 3/ C-8 1/ C-12 3/ C SE lso available in Stainless Steel 1 MLE ELOW lso available in Stainless Steel More sizes available 2 MLE ELOW SWIVEL CR 1275 C3529 Part # Male Male Pipe 1 Pipe /8 1/ /4 1/ /4 1/ /8 1/ /8 3/ /2 1/ /2 3/ /2 1/ /4 1/ /4 3/ /4 1-1/ /2 1-1/ swivels for installation purpose only Part # Male Male Pipe 1 Pipe /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ /2 1-1/ SE street elbow CD 1234R C3409 Part # Male Female Pipe 1 Pipe /8 1/ /8 3/ /4 1/ /4 1/ /4 3/ /4 1/ /8 1/ /8 1/ /8 3/ /8 1/ /2 1/ /2 3/ /2 1/ /2 3/ /4 1/ /4 3/ / / / /4 1-1/ /2 1-1/ HYDRULIC Part # Male Male Pipe 1 Pipe S-4-4 1/4 1/ S-6-6 3/8 3/ S-8-8 1/2 1/ S /4 3/ lso available in Stainless Steel More sizes available 332 Phone:

333 HYDRULIC DPTERS STEEL PIPE FITTINGS street elbow swivel 1 2 Swivels for installation only SE FEMLE ELOW DD 1245 C3509 Part # Male Pipe 1 Female Pipe /4 1/ /8 3/ /2 1/ /4 3/ SHORT ODY street elbow 1 Part # Male Female Pipe 1 Pipe X-4 1/4 1/ X-6 3/8 3/ X-8 1/2 1/ Part # Female Female Pipe 1 Pipe /8 1/ /4 1/ /4 1/ /8 1/ /8 3/ /2 1/ /2 3/ /2 1/ /4 1/ /4 3/ / /4 1-1/ /2 1-1/ More sizes available lso available in Stainless Steel SE STREET ELOW CD SE female elbow DD C3559 Part # Male Female Pipe 1 Pipe /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ /2 1-1/ Part # Female Female Pipe 1 Pipe /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ More sizes available More sizes available lso available in Stainless Steel HYDRULIC Fax: sales@global-hose.com 333

334 STEEL PIPE FITTINGS SE SE male pipe tee 1 2 lso available in Stainless Steel female branch pipe tee RRS Part # Male Male Pipe 1 & 2 Pipe /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ Part # Male Female Pipe 1 & 2 Pipe /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ SE HYDRULIC DPTERS Female run Pipe tee 1 2 Some sizes available in Stainless Steel male branch PIPE tee MMO 1277 Part # Male Female Pipe 1 & 3 Pipe /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ /2 1-1/ KMMOO 1278 C3609 Part # Female Male Pipe 1 & 2 Pipe /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ /2 1-1/ HYDRULIC SE street PIPE tee 3 lso available in Stainless Steel MRO 1276 C3759 Part # Male Female Pipe 1 Pipe 2 & /8 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ /2 1-1/ SE Some sizes available in Stainless Steel female Pipe tee More sizes available ll sizes available in Stainless Steel C3709 Part # Female Pipe / / / / / / / Phone:

335 HYDRULIC DPTERS SE female cross lso available in Stainless Steel MLE RNCH cross C3959 Part # Female Pipe 1,2,3 & / / / / / / Part # Pipe Size 1, 2, 3 & / / / / STEEL PIPE FITTINGS Five (5) lessons about the way we treat people 4 - Fourth Important Lesson. - The obstacle in Our Path. In ancient times, a King had a boulder placed on a Roadway. Then he hid himself and watched to see if nyone would remove the huge rock. Some of the King's' wealthiest merchants and courtiers came by and simply walked around it.. Many loudly blamed the King for not keeping the roads clear, but none did anything about getting the stone out of the way. Then a peasant came along carrying a load of vegetables. Upon approaching the boulder, the peasant laid down his burden and tried to move the stone to the side of the road. fter much pushing and straining, he finally succeeded. fter the peasant picked up his load of vegetables, he noticed a purse lying in the road where the boulder had been. The purse contained many gold coins and a note from the King indicating that the gold was for the person who removed the boulder from the roadway. The peasant learned what many of us never understand! Every obstacle presents an opportunity to improve our condition. The uglier a man's legs are, the better he plays golf. It's almost a law. - H G Wells I never pray on a golf course. ctually, the Lord answers my prayers everywhere except on the course. - illy Graham HYDRULIC Fax: sales@global-hose.com 335

336 HYDRULIC 336 STRIGHT THRED O-RING DPTERS HYDRULIC DPTERS Steel Straight Thread o-ring dapters Straights Pg Shapes Pg ulkheads Pg Female Swivels Pg O-Ring Fittings Pg Conformance SE J514 SE J1926/1, SE J1926/3 ISO , ISO Materials Steel- SE 12L14 Carbon steel trivalent chrome plated or bright silver finish. Working Pressures The following table lists the recommended working pressures for steel O-ring Straight Thread Fittings made in accordance with SE standard J514. Many factors such as surging, vibration, mechanical shock and over tightening may affect the integrity of the fitting connections. SE recommends sufficient testing be conducted to assure that performance levels will be safe and satisfactory, especially if installed in systems operating at elevated pressures or in severe conditions. When using the fittings with different size or thread type, use the lower pressure rating of the two threads. Caution: lthough most O-ring Straight Thread Fittings have sufficient structural integrity to support the weight of many components, consult with our technical support department for guidance in selection of parts for this purpose. Non-adjustable stud Step 1. Inspect port area to be free of any contaminant. Step2. Lubricate o-ring and threads on fitting. Step 3. Turn fitting into port finger tight, then torque to the value shown in the following tables. J514 & J1926/3 Torque Values Dash Straight Straight djustable Size Thread Stud Torque Stud Torque -2 5/ / / / / / / / / / / / / Phone: Steel straight thread o-ring Recommended ssembly Instructions SE J514 O-ring Straight Thread Fitting pressure ratings for straight and adjustable thread port studs Dash Straight 4 to 1 4 to 1 Size Thread Minimum Minimum urst PSI urst PSI Straight djustable O-ring O-ring -2 5/ / / / / / / / / / / / / adjustable stud Step1. Follow steps 1 and 2 from the foregoing instructions, then proceed to the following steps below. Step 2. Looking at fitting from end with nut/washer/0-ring assembly, turn nut clockwise as far as possible. Step 3. Using wrench pad, turn fitting into port until the washer touches the port spot face. Continue turning fitting until washer touches the thread nearest wrench pad. Step 4. ack off fitting counterclockwise not exceeding one revolution until it is orientated in the correct position. Step 5. Place wrench on the wrench pad of fitting to prevent fitting from turning, and torque nut to the value shown in the following table. J1453 & J1926/2 Torque Values Dash Straight Straight djustable Size Thread Stud Torque Stud Torque -2 5/16-24 N N -3 3/8-24 N N -4 7/ / / / / / / / / / Why wet Torque? Due to the difference in plating types and thickness, materials, and thread quality of different components, the coefficient of friction varies greatly on any given assembly. Lubrication not only produces a more consistent coefficient of friction, it increases clamping force on sealing area with less torque on the threads. Overtightening causes threads to yield, deform and lose their ability to maintain an adequate load or clamping force on the seating area. Extended operation and severe conditions cause further yielding which results in leaks. Overtightening is the single greatest cause for leaks in metal to metal seat hydraulic connections. It is our firm position, that to not wet torque, is to compromise consistency and quality for convenience.

337 HYDRULIC DPTERS SE MS JIC TO o-ring connector 1 2 lso available in Stainless Steel lso vailable in restrictor R F50X 1231 C5315 Part # JIC Thread Size 1 O-Ring Thread / / /8-24 3/ / / / / / / / / / / / / /2-20 1/ /2-20 7/ /2-20 9/ / / / / / / / / / / / / / / /4-16 3/ /4-16 7/ /4-16 9/ /4-16 7/ / / / / /8-14 7/ /8-14 9/ /8-14 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / STEEL O-RING DPTERS long jic to O-ring connector 1 2 *Length= Overall length of fitting lso available in Stainless Steel O-Ring to PIPE adapter 1 2 More sizes available Some sizes available in Stainless Steel 6400L R FF50X 1231L0 C5316 Part # JIC Thread Size 1 O-Ring Thread 2 Length* 6400-L-4 7/ / " L-6 9/ / " L-8 3/4-16 3/ " L-10 7/8-14 7/ " L / / " L / / " L / / " F5X 1264R C3249 Part # O-Ring Thread 1 Male Pipe Thread / / / / /2-20 1/ / / / / / / /4-16 3/ /4-16 1/ /4-16 3/ /8-14 1/ / / / / / / / / / / HYDRULIC Fax: sales@global-hose.com 337

338 STEEL O-RING DPTERS 0-ring to 37 jic swivel adapter F65X SE HYDRULIC DPTERS DJUSTLE O-RING HEX NIPPLE NWO 2220 F50HO 1286 Part # O-Ring Thread 1 JIC Thread Size O-4-4 7/ / O-6-6 9/ / O-6-8 9/ / O-8-8 3/4-16 3/ O-8-6 3/4-16 9/ O /8-14 7/ O / / O / / O / / O / / O / / O / / Some sizes available in Stainless Steel More sizes available Part # O-Ring Thread 1 O-Ring Thread O-4 7/ / O-6 9/ / O-8 3/4-16 3/ O-8-6 3/4-16 9/ O-10 7/8-14 7/ O /8-14 3/ O / / O / / O / / O / / O / / O / / O / / O / / lso available in Stainless Steel o-ring hex nipple union FEMLE O-RING TO MLE PIPE DPTER R FHGJ 1267R C3239 HYDRULIC Part # O-Ring Thread 1 O-Ring Thread O-6 9/ / O-8 3/4-16 3/ O-10 7/8-14 7/ O /8-14 3/ O / / O / / O / / O / / More sizes available Part # O-Ring Thread 1 Male Pipe Thread / / / / / / / / / / /4-16 1/ /4-16 3/ /4-16 1/ /8-14 1/ /8-14 3/ / / / / / / More sizes available 338 Phone:

339 HYDRULIC DPTERS o-ring to female pipe adapter R 1 2 F50G 1268R C3269 Part # O-Ring Thread 1 Female Pipe Thread O-2-2 5/ / O-4-2 7/ / O-4-4 7/ / O-5-2 1/2-20 1/ O-5-4 1/2-20 1/ O-6-2 9/ / O-6-4 9/ / O-6-6 9/ / O-6-8 9/ / O / / O-8-4 3/4-16 1/ O-8-6 3/4-16 3/ O-8-8 3/4-16 1/ O /4-16 3/ O /8-14 1/ O /8-14 3/ O /8-14 1/ O /8-14 3/ O / / O / / O / / O / O / / O / / O / O / / O / / O / / O / O / / O /8-12 3/ O / / O / / O / O / / O / / O / / O / / O / O-RING HEX HED PLUG SE P50N Part # O-Ring Thread 6408-O-2 5/ O-3 3/ O-4 7/ O-5 1/ O-6 9/ O-8 3/ O-10 7/ O / O / O / O / O / O / SE STEEL O-RING DPTERS lso available in Stainless Steel O-RING hollow HEX HED PLUG 6408HHP FF2138 HP50N Part # O-Ring Thread 6408-H-O-2 5/ H-O-3 3/ H-O-4 7/ H-O-5 1/ H-O-6 9/ H-O-8 3/ H-O-10 7/ H-O / H-O / H-O / H-O / H-O / H-O / lso available in Stainless Steel Some sizes available in Stainless Steel More sizes available HYDRULIC Fax: sales@global-hose.com 339

340 HYDRULIC STEEL O-RING DPTERS/ SWIVELS o-ring port reducer/expander 1 2 Some sizes available in Stainless Steel More sizes available vailable in an extender 6410 FF1010 F50G Part # O-Ring Thread 1 O-Ring Thread O-2-4 5/ / O-4-5 7/ / O-4-6 7/ / O-6-4 9/ / O-6-8 9/ / O-8-4 3/4-16 7/ O-8-6 3/4-16 9/ O /4-16 7/ O / / O /8-14 7/ O /8-14 9/ O /8-14 3/ O / / O / / O / / O / / O / / O / / O / / O / / O / / O / / O / / O / / O / / O / / O / / O / / O /8-12 7/ O / / O / / O / / O / / O / / O / / O / / O / / O / / SE MS HYDRULIC DPTERS FEMLE SWIVELS JIC JIC SWIVEL NUT ELOW 1 1 More sizes available Some sizes available in Stainless Steel JIC swivel to male pipe elbow lso available in Stainless Steel More sizes available R C6X 1236 G5506 Part # JIC Thread Size 1 JIC Thread Size / / /2-20 1/ / / /4-16 3/ /4-16 9/ /8-14 7/ /8-14 3/ / / / / / / / / / / / / / / R TF5406 Part # JIC Thread Size 1 Male Pipe Thread / / / / / / / / /4-16 3/ /4-16 1/ /8-14 1/ / / / / / / / / / / Phone:

341 HYDRULIC DPTERS SE MS JIC swivel 45 ELOW 1 Some sizes available in Stainless Steel 2 JIC swivel to female pipe elbow R V6X 1237 C5356 Part # JIC Thread Size 1 JIC Thread Size / / /2-20 1/ / / /4-16 3/ /8-14 7/ / / / / / / / / / / / / FEMLE SWIVELS JIC swivel to male pipe adapter F6X R Part # JIC Thread Male Pipe Size 1 Thread / / / / /2-20 1/ / / / / /4-16 3/ /4-16 1/ /8-14 1/ /8-14 3/ / / / / / / / / / / / / lso available in Stainless Steel 1 Part # JIC Thread Size 1 Female Pipe Thread / / / / /4-16 3/ /4-16 1/ /8-14 1/ / / lso available in Stainless Steel More sizes available JIC swivel connector Part # JIC Thread Size 1 JIC Thread Size / / / / /4-16 3/ /8-14 7/ / / / / / / / / / / JIC swivel to female pipe adapter 1 2 More sizes available lso available in Stainless Steel Part # JIC Thread Size 1 Female Pipe Thread / / / / / / / / / / /4-16 3/ /4-16 1/ /8-14 3/ /8-14 1/ /8-14 3/ / / / / / / / / / / / / HYDRULIC Fax: sales@global-hose.com 341

342 HYDRULIC Female FEMLE Swivels SWIVELS SE MS SE MS JIC swivel RNCH TEE More sizes available JIC swivel run tee 1 2 More sizes available lso available in Stainless Steel R 65X 1227 C5707 Part # JIC Thread Size 1 & 2 JIC Female Thread / / /2-20 1/ / / /4-16 3/ /8-14 7/ / / / / / / / / / / R R6X 1248 C5706 Part # JIC Thread Size 1 & 3 JIC Female Thread / / /2-20 1/ / / /4-16 3/ /8-14 7/ / / / / / / / / / / / / SE MS HYDRULIC DPTERS STEEL SE O-RING FITTINGS JIC to o-ring elbow connector R C50X 1238L C5515 Part # JIC Thread Size 1 O-Ring Thread Size NWO-2 5/ / NWO-3 3/8-24 3/ NWO-4 7/ / NWO-4-3 7/ / NWO-4-5 7/ / NWO-4-6 7/ / NWO-4-8 7/ / NWO-5 1/2-20 1/ NWO-5-4 1/2-20 7/ NWO-5-6 1/2-20 8/ NWO-6 9/ / NWO-6-4 9/ / NWO-6-5 9/ / NWO-6-8 9/ / NWO / / NWO / / NWO-8 3/4-16 3/ NWO-8-6 3/4-16 9/ NWO /4-16 7/ NWO / / NWO / / NWO-10 7/8-14 7/ NWO /8-14 9/ NWO /8-14 3/ NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / Phone:

343 HYDRULIC DPTERS LONG JIC to o-ring elbow 1238-L0R 1 2 SE MS JIC TO O-RING 45 ELOW 1 STEEL SE O-RING V50X 1240R C5716 Part # JIC Thread O-Ring Thread Size 1 Size L-NWO-4 7/ / L-NWO-6 9/ / L-NWO-6-8 9/ / L-NWO-8 3/4-16 3/ L-NWO /4-16 7/ L-NWO-10 7/8-14 7/ LNWO / / LNWO / / More sizes available EXTR LONG JIC to o-ring elbow LL R 1238-LLR Part # JIC Thread Size 1 O-Ring Thread Size LL-NWO-4 7/ / LL-NWO-6 9/ / LL-NWO-6-8 9/ / LL-NWO-8 3/4-16 3/ LL-NWO /4-16 7/ LL-NWO-10 7/8-14 7/ LL-NWO / / LL-NWO / / More sizes available Part # JIC Thread Size 1 O-Ring Thread Size NWO-4 7/ / NWO-4-6 7/ / NWO-4-8 7/ / NWO-5 1/2-20 1/ NWO-6 9/ / NWO-6-8 9/ / NWO / / NWO-8 3/4-16 3/ NWO-8-6 3/4-16 9/ NWO /4-16 7/ NWO / / NWO-10 7/8-14 7/ NWO /8-14 3/ NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / Some sizes available in Stainless Steel More sizes available EXTR-EXTR LONG JIC TO O-RING elbow Part # 1 JIC Thread Size 1 2 O-Ring Thread Size LLL-NWO-6 9/ / LLL-NWO-8 3/4-16 3/ LLL-NWO-10 7/8-14 7/ "Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did. So throw off the bowlines, Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream." - Mark Twain HYDRULIC Fax: sales@global-hose.com 343

344 STEEL SE O-RING SE MS JIC to o-ring branch tee X S50X 1265R C5715 Part # JIC Thread Size 1 & 2 O-Ring Thread Size NWO-4 7/ / NWO-5 1/2-20 1/ NWO-6 9/ / NWO-6-8 9/ / NWO-8 3/4-16 3/ NWO /4-16 7/ NWO-10 7/8-14 7/ NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / HYDRULIC DPTERS o-ring to female pipe elbow 1 2 More sizes available R E0G 1264 C3469 Part # O-Ring Thread Size 1 Pipe Thread Size NWO-4-2 7/ / NWO-4-4 7/ / NWO-5-2 1/2-20 1/ NWO-6-4 9/ / NWO-6-6 9/ / NWO-8-6 3/4-16 3/ NWO-8-8 3/4-16 1/ NWO /8-14 1/ NWO / / NWO / / NWO / NWO / / NWO / / Some sizes available in Stainless Steel More sizes available SE MS JIC to o-ring run tee R R50X 1266R C3459 extra long o-ring to female pipe elbow 2 1 Part # JIC Thread Size 1 & 3 O-Ring Thread Size NWO-4 7/ / NWO-5 1/2-20 1/ NWO-6 9/ / NWO-6-8 9/ / NWO-8 3/4-16 3/ NWO /4-16 7/ NWO-10 7/8-14 7/ NWO / / NWO / / NWO / / NWO / / NWO / / NWO / / Part # O-Ring Thread Size 1 Pipe Thread Size LL-8-6 3/4-16 3/ LL /8-14 1/ LL / / LL / Two silk worms had a race. They ended in a tie. HYDRULIC More sizes available lso available in stainless steel 344 Phone:

345 HYDRULIC DPTERS o-ring to male pipe elbow JIC SWIVEL NUT TO o-ring elbow TF3569 Part # O-Ring Pipe Thread Thread Size 1 Size NWO-4-2 7/ / NWO-4-4 7/ / NWO-6-4 9/ / NWO-6-6 9/ / NWO-8-6 3/4-16 3/ NWO-8-8 3/4-16 1/ NWO /8-14 1/ NWO / / NWO / NWO / / NWO / / NWO / More sizes available Part # STEEL SE O-RING female o-ring to male o-ring elbow 1 O-Ring Thread Size 1 2 More sizes available O-Ring Thread Size NWO-6-6 9/ / NWO-8-8 3/4-16 3/ NWO /8-14 7/ NWO / / Time flies like an arrow. Fruit flies like a banana. 1 2 Part # O-Ring Thread Size 1 JIC Thread Size NWO-4-4 7/ / NWO-6-6 9/ / NWO-8-8 3/4-16 3/ NWO /4-16 7/ NWO /8-14 7/ NWO / / NWO / / NWO / / "In life we all have an unspeakable secret, an irreversible regret, an unreachable dream and an unforgettable love." - Diego Marchi "The three great essentials to achieving anything worthwhile are; first, hard work, second, stick-to-it-iveness, and third, common sense." - Thomas Edison OUR GOL E CCESSILE OFFER SOLUTIONS UILD RELTIONSHIPS HYDRULIC Fax: sales@global-hose.com 345

346 STEEL SE O-RING SE MLE O-RING SWIVEL DPTER R SE HYDRULIC DPTERS 90 O-Ring swivel adapter R Part # O-Ring Female Thread NPSM Size 1 Size O-4-2 7/ / O-4-4 7/ / O-4-6 7/ / O-4-8 7/ / O-5-4 1/2-20 1/ O-6-4 9/ / O-6-6 9/ / O-6-8 9/ / O-8-4 3/4-16 1/ O-8-6 3/4-16 3/ O-8-8 3/4-16 1/ O /4-16 3/ O /8-14 1/ O /8-14 3/ O /8-14 1/ O /8-14 3/ O / / O / / O / / O / O / / O / / O / / O / / O / O / / O /8-12 3/ O / O / / O / / O / More sizes available hole has been found in the nudist camp wall. The police are looking into it. Part # O-Ring Thread Size 1 Female NPSM Size NWO-4-2 7/ / NWO-4-4 7/ / NWO-4-6 7/ / NWO-6-4 9/ / NWO-6-6 9/ / NWO-6-8 9/ / NWO-8-4 3/4-16 1/ NWO-8-6 3/4-16 3/ NWO-8-8 3/4-16 1/ NWO /4-16 3/ NWO /8-14 1/ NWO /8-14 3/ NWO /8-14 1/ NWO /8-14 3/ NWO / / NWO / / NWO / / NWO / NWO / / NWO / / NWO / NWO / / NWO /8-12 3/ NWO / NWO / / NWO / / NWO / "People are always blaming their circumstances for what they are. I don't believe in circumstances. The people who get on in this world are the people who get up and look for the circumstances they want, and if they can't find them, make them." HYDRULIC - George ernard Shaw 346 Phone:

347 HYDRULIC DPTERS SE Part # 45 O-Ring swivel adapter 1 O-Ring Thread Size R theism is a non-prophet organization. Two hats were hanging on a hat rack in the hallway. One hat said to the other, You stay here; I'll go on a head. I wondered why the baseball kept getting bigger. Then it hit me. sign on the lawn at a drug rehab center said: Keep off the Grass. 2 Female NPSM Size NWO-4-2 7/ / NWO-4-4 7/ / NWO-4-6 7/ / NWO-6-4 9/ / NWO-6-6 9/ / NWO-6-8 9/ / NWO-8-4 3/4-16 1/ NWO-8-6 3/4-16 3/ NWO-8-8 3/4-16 1/ NWO /4-16 3/ NWO /8-14 3/ NWO /8-14 1/ NWO /8-14 3/ NWO / / NWO / / NWO / NWO / / NWO / NWO / / NWO / / Fluorocarbon STEEL SE O-RING O-RINGS VITON 90 SE OSS O-RING Part # O-Ring Thread O-Ring I.D / / / / / / / / / / / / NITRILE 90 SE OSS O-RING Part # O-Ring O-Ring Thread I.D / / / / / / / / / / / / / HYDRULIC Fax: sales@global-hose.com 347

348 FLNGE DPTERS SE J518 Conformance Materials Steel per SE J518 with either black phosphate finish or plated chrome finish or iridite dip. Stainless Steel available upon request. Working Pressures The following table lists the recommended working pressures for steel Four-bolt Solid and Split Flange Fititngs and Hose Ends manufactured in accordance with SE standards J518 and J517. SE recommends sufficient testing to be conducted to assure that performance levels will be safe and satisfactory, especially if installed in systems operating at elevated pressures or in severe conditions. When using Flanged Fittings that have a threaded connection on one end, use the lower pressure rating of the two. Caution: lthough many Four-bolt Flanged Fittings have sufficient structural integrity to support the weight of many components, we recommend consulting with our technical support department for guidance in selection of parts for this purpose. HYDRULIC DPTERS Steel Flange dapters SE J518 Four-bolt code 61 flange pressure ratings Dash Flange Head 4 TO 1 Minimum Size OD Inches urst PSI / / / / / / / SE J518 Four-bolt code 62 flange pressure ratings Dash Flange Head 4 TO 1 Minimum Size OD Inches urst PSI / / / / / / HYDRULIC Recommended Solid four-bolt Step 1.Inspect port area to be smooth and free of nicks, burrs, scratches, or contaminants. Step2. Lubricate the o-ring and place in flange head groove. Step 3. Lubricate screw threads, slip lock washers onto screws, and insert screws into flange Step 4. Position flange on port and finger tighten all screws. Step 5. Torque the screws in a figure eight sequence, incrementally until the appropriate torque value in the following table is achieved. J518 Code 61 and code 62 flange minimum torque values Dash Port Code 61 Code 62 Size Size Foot/Lbs. Foot/Lbs. -8 1/ / / / /2 79 N N /2 116 N N N Steel flange adapters ssembly Instructions recommended split four-bolt Step1. Follow steps 1 through 3 above, then proceed to the following steps. Step 2.Position both flanges on port and turn one screw in each flange about three turns. Step 3. Rotate each flange away from the port for sufficient clearance to position hose or fitting flange head on port. Step 4. Close each flange until it properly captures flange head. Insert remaining screws and finger tighten. Step 5. Torque the screws in a figure eight sequence incrementally until the appropriate torque value in the preceeding table is achieved. Why wet Torque? Due to the difference in plating types and thickness, materials, and thread quality of different components, the coefficient of friction varies greatly on any given assembly. Lubrication not only produces a more consistent coefficient of friction, it increases clamping force on sealing area with less torque on the threads. Overtightening causes threads to yield, deform and lose their ability to maintain an adequate load or clamping force on the seating area. Extended operation and severe conditions cause further yielding which results in leaks. Overtightening is the single greatest cause for leaks in metal to metal seat hydraulic connections. It is our firm position, that to not wet torque, is to compromise consistency and quality for convenience. 348 Phone:

349 HYDRULIC DPTERS JIC flange adapter code JIC flange 90 adapter code 61 1 FLNGE DPTERS Part # JIC Flange Flange Thread Size 2 Head OD Size /4-16 1/ /4-16 3/ / / / / / / / / / / / / / / / / More sizes available JIC flange 45 0 adapter code PSI 3000 PSI 2 Part # JIC Thread Size 1 Flange Size 2 Flange Head OD /4-16 1/ /4-16 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / More sizes available Part # JIC Thread Size 1 2 Flange Size 2 More sizes available Flange Head OD 3000 PSI /4-16 1/ /4-16 3/ / / / / / / / / / / / / / / / / / / Part # JIC flange adapter code JIC Thread Size 1 Flange Size 2 Flange Head OD PSI /4-16 1/ / / / / / / / / / / / / / / More sizes available HYDRULIC Fax: sales@global-hose.com 349

350 FLNGE HYDRULIC DPTERS DPTERS JIC flange 45 adapter code HYDRULIC FLNGE DPTERS braze to split flange code JIC flange 90 adapter code braze to split flange code PSI Part # JIC Flange Flange Thread Size 2 Head Size 1 OD / / / / / / / / / / / / / / More sizes available Part # JIC Thread Size 1 Flange Size 2 Flange Head OD 6000 PSI /4-16 1/ / / / / / / / / / / / / / / More sizes available split flange PLUG code 61 split flange PLUG code P 6862P 6000 PSI Part # Flange Size Tube O.D /2 1/ /4 3/ /4 1-1/ /2 1-1/ PSI Part # Flange Size / / / / PSI HYDRULIC 3000 PSI Part # Flange Size TubeO.D /2 1/ /4 3/ /4 1-1/ /2 1-1/ /2 2-1/ Part # Flange Size / / / / Phone:

351 FLNGE HYDRULIC DPTERS DPTERS HYDRULIC FLNGE DPTERS NITRILE 90 FLNGE O-RING Viton vailable upon request 90DF split flange kit code 62 SFXK Part # Flange Size O-Ring Number / / / / / Flange connector plates code PSI Part # Flange Flange Head Size Diameter / / / / CP split flange half code 61 SF Part # Flange Size / / / / / split flange kit code 61 SFK 3000 PSI Part # Flange Size Flange Head Diameter / / / / / split flange half code 62 SFX 3000 PSI Part # Flange Size Flange Head Dia / / / / / PSI Part # Flange Size Flange Head Diameter / / / / HYDRULIC Fax: sales@global-hose.com 351

352 FLNGE DPTERS pipe weld flange pad code 61 W4 HYDRULIC DPTERS pipe THRED flange pad code 62 W PSI 6000 PSI Part # Pipe Size / / / / pipe weld flange pad code 62 W42 Part # Pipe Size / / / / / o-ring flange pad code 61 W PSI 3000 PSI Part # Pipe Size / / / / Part # O-Ring Thread Pad Size Size / / / / / / / pipe THRED flange pad code 61 W43 o-ring flange pad code 62 W PSI 3000 PSI HYDRULIC Part # Pipe Size / / / / / Part # O-Ring Thread Pad Size Size / / / / / / / Phone:

353 HYDRULIC DPTERS O-RING FCE SEL DPTERS O-Ring face seal adapter SE J1453 Conformance Materials Steel- SE 12L14 carbon steel trivalent chrome plated or clear silver finish. Working Pressures The following table lists the recommended working pressures for steel O-ring Face Seal tube fittings made in accordance with SE standard J1943. Many factors such as impulsing, vibration, mechanical shock and overtightening may affect the integrity of fitting connections. SE recommends sufficient testing be conducted to assure that performance levels will be safe and satisfactory, especially if installed in systems operating at elevated pressures or in severe conditions. When using fittings with different size or thread type, use lower pressure rating of the two threads. Caution: O-ring Face Seal fittings are not designed to provide structural support for other components. SE J1453 O-ring face seal fittings pressure ratings Dash Flared 4 TO 1 Minimum Size Thread Size urst PSI -4 9/ / / / / / SE J1453 O-ring face seal pressure ratings for Straight Thread Port Dash Flared 4 TO 1 Minimum urst Size Thread Size Straight djustble -4 9/ / / / / / Recommended Step 1.Lubricate the threads and the entire surface of the face seal o-ring Step2. Install o-ring into face seal groove. Step 3. Place matting face seal flange against o-ring and finger tighten face seal flange nut. Step 4. Torque flange nut to the value in the following table. Dash Flared Thread Torque Size Size Foot/Lbs. -4 9/ / / / / / Torque Values: The torque values provided are to provide benchmarks that we believe give optimum results for leak free connections. ctual torque val- O-ring face seal ssembly Instructions lternate ssembly Method Step1. If torque method not possible, follow steps 1-3 above, then proceed to the steps below. Step 2. Lightly wrench tighten the nut until there is firm resistance. Step 3. Place a wrench on wrench pad next to nut as near the 6 o clock as possible. Step 4. Place second wrench on nut as near the 3 o clock position as possible. Step 5. Turn nut clockwise to no less than half way to the 4 o clock position and no more than the 6 o clock position. Why wet Torque? Due to the difference in plating types and thickness, materials, and thread quality of different components, the coefficient of friction varies greatly on any given assembly. Lubrication not only produces a more consistent coefficient of friction, it increases clamping force on sealing area with less torque on the threads. Overtightening causes threads to yield, deform and lose their ability to maintain an adequate load or clamping force on the seating area. Extended operation and severe conditions cause further yielding which results in leaks. Overtightening is the single greatest cause for leaks in metal to metal seat hydraulic connections. It is our firm position, that to not wet torque, is to compromise consistency and quality for convenience. HYDRULIC Fax: sales@global-hose.com 353

354 O-RING FCE SEL DPTERS HYDRULIC DPTERS SE braze tube nut (sleeve required) FF318 FF1311 SE cap FF304C Part # Tube O.D. raze Tube O.D. FSO / FSO / FSO / FSO / FSO / FSO FSO / FSO / Part # Tube O.D. Flat Face Thread FSO304-C-4 1/4 9/ FSO304-C-6 3/8 11/ FSO304-C-8 1/2 13/ FSO304-C-10 5/ FSO304-C-12 3/4 1-3/ FSO304-C / FSO304-C /4 1-11/ FSO304-C / SE RZE TUE SLEEVE FF319 FF3019 SE MLE UNION CONNECTOR 1 2 NEW FF2403 FF1203 Part # Tube O.D. FSO / FSO / FSO / FSO / FSO / FSO FSO / FSO / Part # Tube O.D. Flat Face Thread 1 FSO /4 9/ FSO /8 11/ FSO /2 13/ FSO /4 1-3/ FSO / FSO /4 1-11/ FSO / See Page 320 for JIC Nut and Sleeve RZE TUE UNION SE FF403 SE PLUG FF2408 FF1254 HYDRULIC Part # raze Port Flat Face Thread FSO /4 9/ FSO /8 11/ FSO /2 13/ FSO / FSO /4 1-3/ FSO / FSO /4 1-11/ FSO / More sizes available Part # Tube O.D. Flat Face Thread FSO /4 9/ FSO /8 11/ FSO /2 13/ FSO / FSO /4 1-3/ FSO / FSO /4 1-11/ FSO / Phone:

355 HYDRULIC DPTERS O-RING FCE SEL DPTERS SE MLE ELOW FF2501 FF1208 Straight thread connector FF6400 SE FF Part # Flat Face Thread 1 Male Pipe Thread 2 FS / / FS / / FS / / FS / / FS / / FS / / FS / FS / FS /8-12 1/ FS /8-12 3/ FS / FS / / FS / FS / / FS / More sizes available Don't cry because it's over. Smile because it happened. Part # Flat Face Thread 1 O-Ring Thread 2 FS6400-O-4-4 9/ / FS6400-O-4-6 9/ / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / FS6400-O / FS6400-O / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / / FS6400-O / FS6400-O / Dr. Seuss e who you are and say what you feel because those who mind don't matter and those who matter don't mind. - Dr. Seuss The more that you read, the more things you will know. The more that you learn, the more places you'll go. - Dr. Seuss MLE FLT FCE TO FEMLE 37 SWIVEL 1 2 More sizes available FF6402 FF1294 Part # Flat Face Thread 1 JIC Thread 2 FS / / FS / / FS / / FS / FS / / FS / / HYDRULIC Fax: sales@global-hose.com 355

356 O-RING FCE SEL DPTERS HYDRULIC DPTERS swivel nut elbow 1 FF6500 FF O-ring elbow connector FF6801 FF1238 HYDRULIC Part # Flat Face Flat Face Thread 1 Thread 2 FS / / FS / / FS / / FS FS / / FS / / FS / / FS More sizes available MLE Jic 37 FLRE TO FEMLE FLT FCE SWIVEL FF6504 FF1296 Part # JIC Thread Flat Face Size 1 Thread 2 FS / / FS / / FS / / FS / FS / / FS / / More sizes available Your manuscript is both good and original, but the part that is good is not original and the part that is original is not good. - Samuel Johnson Part # Flat Face Thread 1 O-Ring Thread 2 FS / / FS / / FS / / FS / / FS / / FS / / FS / / FS / / FS / FS / FS / FS / / FS / / FS / / FS / / FS / / FS / / FS / / FS / / FS / More sizes available straight thread SWIVEL NUT elbow 1 2 FF6809 FF1239 Part # O-Ring Thread 1 Flat Face Thread 2 FS / / FS / / FS / / FS / FS / / FS / / More sizes available 356 Phone:

357 HYDRULIC DPTERS STEEL SPT DPTERS jic MLE CONNECTOR SPT O5 Part # JIC Thread Size 1 Male SPT / / / / / / / / / / /4-16 3/ /4-16 1/ /4-16 3/ /8-14 1/ /8-14 3/ / / / / / / / More sizes available STEEL SPT DPTERS SPT HEX NIPPLE 1 2 SPT PLUG 3520 MT Part # Male SPT 1 Male SPT /8-28 1/ /4-19 1/ /8-19 3/ /2-14 1/ /8-14 5/ /4-14 3/ More sizes available 100-Y K-RM MHL 296 Part # SPT / / / / / jic MLE elbow SPT More sizes available STEEL SPP DPTERS bspp HEX NIPPLE M Part # JIC Thread Size 1 Male SPT / / / / / / / / / / /4-16 3/ /4-16 1/ /8-14 1/ / / / / / More sizes available Part # Male SPP 1 Male SPP /8-28 1/ /4-19 1/ /8-19 1/ /8-19 3/ /2-14 3/ /2-14 1/ /8-14 1/ /4-14 1/ /4-14 3/ / / / / HYDRULIC Fax: sales@global-hose.com 357

358 STEEL SPT DPTERS JIC TO SPP MLE ELOW 1 SPP COUPLING Reducing sizes available 3425 F Part # SPP / / / / / JIC TO FEMLE SPP STRIGHT SWIVEL 3240 MJFS 1 2 Part # JIC Thread Female SPP Size 1 Swivel / / / / /4-16 1/ /8-14 5/ / / / More sizes available HYDRULIC DPTERS jic to bspp 45 elbow 1 bspp to male pipe nipple 1 2 JIC TO SPP MLE CONNECTOR J Part # JIC Thread Size 1 Male SPP / / / / /4-16 1/ / / / MMP 3825 Part # Male SPP Size 1 Male Pipe Thread Size /8-28 1/ /4-19 1/ /8-19 3/ /2-14 1/ /4-14 3/ / / More sizes available 30J 3800 HYDRULIC 358 Part # JIC Thread Size 1 Male SPP NWO-4-2 7/ / NWO-4-4 7/ / NWO-6-4 9/ / NWO-6-6 9/ / NWO-6-8 9/ / NWO-8-6 3/4-16 3/ NWO-8-8 3/4-16 1/ NWO /4-16 3/ NWO /8-14 1/ NWO / / NWO / NWO / NWO / / NWO / / Phone: Part # JIC Thread Size 1 Male SPP / / / / / / / / / / / / / / /4-16 3/ /4-16 1/ /4-16 3/ /8-14 1/ / / / / / / / / More sizes available

359 HYDRULIC DPTERS JIC TO SPP STRIGHT SWIVEL STEEL SPP METRIC DPTERS FEMLE DPTER SPP MMFP Part # JIC Thread Size 1 Male SPP / / / / / / / / /4-16 3/ /4-16 1/ /8-14 1/ / / / More sizes available HEX HED PLUG bspp HOLLOW HEX PLUG bspp 3408 Part # Male SPP 9522-P-2 1/ P-4 1/ P-6 3/ P-8 1/ P-12 3/ P P / HHP Part # Male SPP 9522-H-2 1/ H-4 1/ H-6 3/ H-8 1/ H-12 3/ H H / Part # Female Pipe 1 Male SPP /8 1/ /4 1/ /4 1/ /8 3/ /2 1/ /4 3/ /4 1-1/ /2 1-1/ More sizes available STEEL METRIC DPTERS male connector J (R) Port-seal crush washer and O-ring included Part # JIC Thread Metric Size 1 Thread / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x / x HYDRULIC Fax: sales@global-hose.com 359

360 HYDRULIC STEEL METRIC DPTERS 1 male elbow 2 STRIGHT SWIVEL (R) Port-seal crush washer and O-ring included Part # JIC Thread Size 1 Metric Thread NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x NWO / x JS (R) Part # JIC Thread Size 1 Metric Thread / x / x / x / x / x / x / x / x / x HYDRULIC DPTERS hex head plug metric parallel HoLLOW hex head plug metric parallel FEMLE DPTER Part # Metric Thread 8555-P-10 10x P-12 12x P-14 14x P-16 16x P-18 18x P-20 20x P-22 22x P-26 26x P-30 30x HHP Part # Metric Thread 8555-H-10 10x H-12 12x H-14 14x H-16 16x H-18 18x H-20 20x H-22 22x H-26 26x H-30 30x More sizes available MMFP (R) Part # Female Pipe Thread 1 Metric Thread /8 10x /4 12x //4 14x /8 16x /8 18x /2 16x /2 18x /2 22x /4 27x x /4 42x More sizes available 360 Phone:

361 HYDRULIC DPTERS HIGH PRESSURE SWIVELS male connector 1 2 Part # JIC Thread Size 1 Male Pipe Thread 2 HP / / HP /4-16 3/ HP /8-14 1/ HP / / HP / HP / / HP / / HIGH PRESSURE SWIVELS 3000 PSI male elbow 1 Part # JIC Thread Size 1 Male Pipe Thread 2 HP / / HP / / HP /4-16 3/ HP /4-16 1/ HP /8-14 1/ HP / / HP / HP / / HP / / HP / female connector 2 female elbow 1 2 Part # JIC Thread Size 1 Female Pipe Thread 2 HP / / HP /4-16 3/ HP /8-14 1/ HP / / HP / HP / / HP / / Part # JIC Thread Size 1 Female Pipe Thread 2 HP / / HP / / HP /4-16 3/ HP /8-14 1/ HP / / HP / HP / / HP / / HP / tube adapter pipe adapter Part # JIC Thread Size 1 JIC Thread Size 2 HP / / HP /4-16 3/ HP /8-14 7/ HP / / HP / / HP / / HP / / HP / / HP / / Part # Male Pipe Thread 1 Female Pipe Thread 2 HP /4 1/ HP /8 3/ HP /2 1/ HP /4 3/ HP HP /4 1-1/ HP /2 1-1/ HP HYDRULIC Fax: sales@global-hose.com 361

362 HIGH PRESSURE SWIVELS 3000 PSI pipe coupling 1 2 Part # Female Pipe Thread 1 Female Pipe 2 HP /4 1/ HP /8 3/ HP /2 1/ HP /4 3/ HP HP /4 1-1/ HP /2 1-1/ HP male swivel elbow 1 HYDRULIC DPTERS street elbow 1 Part # Male Pipe Thread 1 Female Pipe Thread 2 HP /4 1/ HP /4 3/ HP /8 1/ HP /8 3/ HP /2 1/ HP /4 3/ HP HP /4 1-1/ HP /2 1-1/ HP HYDRULIC Part # Male Pipe Thread 1 Female NPSM 2 HP /4 1/ HP /4 3/ HP /8 1/ HP /8 3/ HP /2 1/ HP /4 3/ HP HP /4 1-1/ HP /2 1-1/ HP female swivel elbow 1 Part # Female Pipe Thread 1 Female NPSM 2 HP /4 1/ HP /4 3/ HP /8 1/ HP /8 3/ HP /2 1/ HP /4 3/ HP HP /4 1-1/ HP /2 1-1/ HP jic to 0-ring elbow connector Part # 1 JIC Thread Size 1 2 O-Ring Thread 2 HP / / HP / / HP /4-16 3/ HP /8-14 7/ HP / / HP / / HP / / HP / / HP / / * Live swivel is on the 2 side as pictured. 362 Phone:

363 HYDRULIC DPTERS STEEL EDED HOSE INSERTS male PIpe hose insert SE STEEL EDED HOSE INSERTS 45 o pipe hose insert SE Part # Hose I.D. Pipe Thread /4 1/ /4 1/ /16 1/ /8 1/ /8 3/ /2 3/ /2 1/ /8 1/ /4 3/ / /4 1-1/ /2 1-1/ /2 1-1/ More sizes available Part # Hose I.D. 1 Pipe Thread /2 3/ /8 1/ /4 3/ /4 1-1/ More sizes available 90 o o-ring hose insert 2 1 SE o pipe hose insert Part # Hose I.D. 1 Pipe Thread /4 1/ /8 3/ /2 3/ /2 1/ /8 1/ /4 3/ / / /4 1-1/ /2 1-1/ More sizes available Part # Hose I.D. 1 O-Ring Thread NWO-4 1/4 7/ NWO-5 5/16 1/ NWO-6 3/8 9/ NWO-8 1/2 3/ NWO-10 5/8 7/ NWO /8 3/ NWO-12 3/4 1-1/ NWO / NWO / NWO /4 1-5/ NWO /2 1-7/ NWO /2 1-5/ More sizes available HYDRULIC Fax: sales@global-hose.com 363

364 STEEL EDED HOSE INSERTS 45 o o-ring hose insert 1 HYDRULIC DPTERS 2 Part # Hose I.D. 1 O-Ring Thread NWO-4 1/4 7/ NWO-6 3/8 9/ NWO-8 1/2 3/ NWO-10 5/8 7/ NWO-12 3/4 1-1/ NWO / NWO /4 1-5/ NWO /4 1-5/ NWO /2 1-7/ NWO /2 1-5/ small boy swallowed some coins and was taken to a hospital. When his grandmother telephoned to ask how he was, a nurse said, No change yet. chicken crossing the road is poultry in motion. The short fortune-teller who escaped from prison was a small medium at large. More sizes available o-ring hose insert 1 2 The man who survived mustard gas and pepper spray is now a seasoned veteran. backward poet writes inverse. Part # Hose I.D. 1 O-Ring Thread O-4 1/4 7/ O-6 3/8 9/ O-8 1/2 3/ O-10 5/8 7/ O /8 3/ O-12 3/4 1-1/ O / O / O /4 1-5/ O /4 1-5/ O /2 1-7/ O /2 1-5/ In democracy it's your vote that counts. In feudalism (as in DC) it's your count that votes. When cannibals ate a missionary, they got a taste of religion and were sanctified. Don't join dangerous cults: Practice safe sects. More sizes available HYDRULIC 364 Phone:

365 HYDRULIC DPTERS tube nut SE SE U-S FLRELESS ITE-TYPE STEEL MLE CONNECTOR 1 2 FU-S 7205 Part # Tube JIC Thread O.D Size C /8 5/ C /4 7/ C /8 9/ C /2 3/ C /4 1-1/ C / Part # Tube MalePipe Size 1 Thread 2 C /8 1/ C /8 1/ C /8 3/ C /2 3/ C /2 1/ C /4 3/ C SE 08011S tube SLEEVE TU-S 7165 SE UNION ELOW EU-S 1 Part # Tube O.D C / C / C / C / C / C Part # Tube Size C / C / C / C / C / C SE tube UNION 7305 HU-S SE ms male ELOW CU-S 1 Part # Tube Size C / C / C / C / C / C Part # Tube Male Pipe Size 1 Size 2 C /8 1/ C /4 1/ C /4 1/ C /8 1/ C /8 1/ C /8 3/ C /8 1/ C /2 1/ C /2 3/ C /2 1/ C /4 3/ C HYDRULIC Fax: sales@global-hose.com 365

366 FLRELESS ITE-TYPE STEEL FEMLE ELOW SE SE DU-S 1 HYDRULIC DPTERS UNION TEE JU-S 2 3 Part # Tube Size 1 Female Pipe Size 2 C /4 1/ C /8 1/ C /8 3/ C /2 1/ C /4 3/ C SE MLE RNCH TEE 2 SU-S 7605 Part # Tube Size C / C / C / C / C / C SE MLE O-RING CONNECTOR F5-J HYDRULIC SE Part # Tube Size 1&2 Pipe Thread Size 3 C /8 1/ C /4 1/ C /4 1/ C /8 1/ C /8 3/ C /2 1/ C /4 3/ C FEMLE RNCH TEE OU-S Part # Tube Size 1 Female Pipe Size 3 C /4 1/ C /8 3/ C /2 3/ C /2 1/2 C /4 3/ C Part # Tube Size O-Ring Thread 2 C /4 7/ C /8 9/ C /2 3/ C /2 7/ C /4 1-1/ C / SE SE O-RING ELOW CONNECTOR 1 MLE O-RING RNCH TEE C5U-S Part # Tube Size 1 O-Ring Thread Size 2 C /8 5/ C /4 7/ C /8 9/ C /2 3/ C /4 1-1/ C / S5U-S Part # Tube Size Size 1 & 2 O-Ring Thread Size 3 C /4 7/ C /8 9/ C /2 3/ C /4 1-1/ C / Phone:

367 HYDRULIC COUPLINGS QUICK DISCONNECT THRED TO CONNECT, DRYREK NO-SPILL QUICK CONNECT PSI MX rass ody Steel Wing Nut una-seal ( -40 to +250 F) eroquip S100 Parker 6100 Snaptite 78 Part # ody Size Female NPT /4 1/ * More sizes available, just ask. NEW onded Face Seal External ORing lleviates Full Connection Part # ody Size NPT /4 1/ FETURES - ISO and ISO (bold) Poppet valves to prevent uncoupled leakage Critical parts are induction hardened for durability Dependable ball-locking mechanism holds the maling halves together Socket and plug are precision machined from solid barstock Standard nitrile seals temp range -40 F to +250 F ISO ISO- Interchange ( Connected ) Steel Coupler/ Plug ody Size Maximum Working urst PSI ar PSI ar 1/4" 5, ,270 1,200 3/8" 4, ,270 1,200 1/2" 4, ,500 1,100 3/4" 4, ,800 1,000 1" 4, , /4" 3, , /2" 3, , " 1, , INTERCHNGE DT: Parker 6600, eroquip/ Eaton FD56, Dixon 'K' Series. Hansen H 15000, Safeway S56 LOWER PRICES FEMLE PIPE COUPLER Part # ody Size NPT NV-14-F 1/4" 1/4" NV-38-F 3/8" 3/8" NV-12-F 1/2" 1/2" NV-34-F 3/4" 3/4" NV-1-F 1" 1" FEMLE PIPE PLUG Part # ody Size NPT NV-14-M 1/4" 1/4" 5.95 NV-38-M 3/8" 3/8" 6.39 NV-12-M 1/2" 1/2" 7.34 NV-34-M 3/4" 3/4" NV-1-M 1" 1" ISO Series ISO- Interchange ( Connected ) Steel Coupler/ Plug rass Coupler/ Plug ody Max. Working urst Max. Working urst Size PSI ar PSI ar PSI ar PSI ar 1/8" 4, ,500 1,000 3, ,500 1,100 1/4" 5, ,500 1,550 3, ,000 1,000 3/8" 4, ,500 1,150 2, , /2" 4, ,000 1,100 2, , /4" 4, ,500 1,150 2, , " 4, ,000 1,100 1, , INTERCHNGE DT: Parker 60 Series, Snap-tite 72 series, Dixon 'H' series Hansen HK - series, eroquip/ Eaton FDH5 Suffix '' = rass Material Fax: LOWER PRICES NEW FEMLE PIPE COUPLER Part # ody Size NPT HNV-14-F 1/4" 1/4" HNV-14-F- 1/4" 1/4" HNV-38-F 3/8" 3/8" HNV-38-F- 3/8" 3/8" HNV-12-F 1/2" 1/2" HNV-12-F- 1/2" 1/2" HNV-34-F 3/4" 3/4" HNV-34-F- 3/4" 3/4" HNV-1-F 1" 1" HNV-1-F- 1" 1" PLUG Part # ody Size NPT HNV-14-M 1/4" 1/4" 6.80 HNV-14-M- 1/4" 1/4" 9.01 HNV-38-M 3/8" 3/8" 6.39 HNV-38-M- 3/8" 3/8" HNV-12-M 1/2" 1/2" 7.26 HNV-12-M- 1/2" 1/2" HNV-34-M 3/4" 3/4" HNV-34-M- 3/4" 3/4" HNV-1-M 1" 1" HNV-1-M- 1" 1" sales@global-hose.com 367 HYDRULIC

368 QUICK DISCONNECT HYDRULIC COUPLINGS FF Series HTMC 74C FLUSH FCE Steel Coupler/ Plug Coupled ody Size Maximum Working urst PSI ar PSI ar 1/4" 5, ,270 1,200 3/8" 4, ,270 1,200 1/2" 4, ,500 1,100 5/8" 4, ,800 1,000 3/4" 4, , " 3, , FEMLE PIPE COUPLER Part # ody Size NPT FF-14-F 1/4" 1/4" FF-38-F 3/8" 3/8" FF-12-F 1/2" 1/2" FF-34-F 3/4" 3/4" FF-1-F 1" 1" FETURES Steel construction, zinc plated trivalent finish. Hardened Nipples and sleeves and solid barstock construction for maximum resistance to damage from hydraulic and mechanical shock. This nti-lowout Nitrile/ PTFE bonded seal is designed to prevent blow out or damage during servere service conditions. Durable ball-locking mechanism assures reliable connection everytime. FF Series HTMN 74N PLUG Part # ody Size NPT FF-14-M 1/4" 1/4" FF-38-M 3/8" 3/8" FF-12-M 1/2" 1/2" FF-34-M 3/4" 3/4" FF-1-M 1" 1" G - Series gricultural Interchange ( Connected ) Steel Coupler/ Plug Nominal Maximum Working urst Size PSI ar PSI ar 1/4" 4, ,000 1,500 3/8" 4, ,100 1,600 1/2" 4, ,500 1,100 3/4" 3, , " 3, , FETURES Heavy duty heat treated poppet: valves are standard with rugged, speciallydesigned seals made of nitrite for leak-free performance in the toughest application. High-strength steel valve guides designed for high flow rates and made extra tough for agricultural service. Dependable hardened chrome alloy steel locking balls. Heat treated plugs and sleeves. Standard seals temp range -40 F to +250 F Snap-Tite 60 Series FEMLE PIPE COUPLER Part # ody Size NPT NV-14-F 1/4" 1/4" NV-38-F 3/8" 3/8" NV-12-F 1/2" 1/2" NV-34-F 3/4" 3/4" NV-1-F 1" 1" PLUG Part # ody Size NPT NV-14-M 1/4" 1/4" NV-38-M 3/8" 3/8" NV-12-M 1/2" 1/2" NV-34-M 3/4" 3/4" NV-1-M 1" 1" HYDRULIC 368 Phone:

369 HOSE FITTINGS HYDRULIC HOSE & FITTINGS NPTF SOLID MLE PIPE FITTING - ONE PIECE ITE TYPE Part # Thread Size Hose ID D E 2 Overall Length Cut-off Nipple ID D1MP /4-18 1/ D1MP /8-18 3/ D1MP /2-14 1/ D1MP /4-14 3/ D1MP / D1MP /4-11-1/2 1-1/ D1MP /2-11-1/2 1-1/ MLE OSS O-RING - ONE PIECE/ FITTING Part # Thread Size Hose ID D E 2 Overall Length Cut-off Nipple ID D1M / / D1M / / D1M /4-16 1/ D1M / / D1M / D1M / / NPTF MLE SWIVEL PIPE FITTING - ONE PIECE ITE TYPE Part # Thread Size Hose ID D E 1 Overall Length Cut-off Nipple ID D1PS /4-18 1/ D1PS /8-18 3/ D1PS /2-14 1/ D1PS /4-14 3/ D1PS / HYDRULIC Fax: sales@global-hose.com 369

370 HYDRULIC HOSE & FITTINGS HOSE FITTINGS MLE JIC 37 FITTING - ONE PIECE ITE TYPE Part # Thread Size Hose ID Overall D Cut-Off E Nipple Dia. 2 D1MJ / / D1MJ / / D1MJ /4-16 1/ D1MJ / / D1MJ / D1MJ / / MLE O-RING FCE SEL FITTING - ONE PIECE ITE TYPE Part # Thread Size Hose ID Overall D Cut-Off E Nipple Dia. 2 D1MR 1J / / D1MR 1J / / D1MR 1J / / D1MR 1J / / D1MR 1J / FEMLE O-RING FCE SEL FITTING - ONE PIECE ITE TYPE HYDRULIC Part # Thread Size Hose ID Overall D Cut-Off E Nipple Dia. 1 Dia. 2 D1FR 1JC / / D1FR 1JC / / D1FR 1JC / / D1FR 1JC / / D1FR 1JC / Phone:

371 HOSE FITTINGS HYDRULIC HOSE & FITTINGS FEMLE JIC 37 SWIVEL FITTING - ONE PIECE ITE TYPE Part # Thread Size Hose ID D E 1 2 Overall Length Cut-off Nipple ID D1FJ / / D1FJ / / D1FJ /4-16 1/ D1FJ / / D1FJ / D1FJ /8-12 5/ D1FJ / / FEMLE JIC 37 SWIVEL 90 ELOW - ONE PIECE ITE TYPE Part # Thread Size Hose ID D H 1 Overall Length Cut-off Drop D1FJ / / D1FJ / / D1FJ /4-16 1/ D1FJ / / D1FJ / D1FJ / / HYDRULIC Fax: sales@global-hose.com 371

372 HYDRULIC HOSE & FITTINGS 1. Provide for length change. HOSE INSTLLTION 2. void twisting and orient properly. In straight hose installations, allow enough slack in the hose line to provide for changes in length that will occur when pressure is applied. This change in length can be from +2% to -4%. 3. Protect from hazardous environment Do not twist hose during installation. This can be determined by the printed layline on the hose. Pressure applied to a twisted hose can cause failure or loosening of connections. 4. void mechanical strain. Keep hose away from hot parts. High ambient temperature will shorten hose life. If you can not route it away from the heat source, insulate it. 5. Use proper bend radius. Use elbows and adapters in the installation to relieve strain on the assembly and to provide easier and neater installations that are accessible for inspection and maintenance. 6. Secure for protection. Keep the bend radius of the hose as large as possible to avoid collapsing of the hose and restriction of flow. Follow catalog specs on minimum bend radii. Install hose runs to avoid rubbing or abrasion. 8. void improper hose movement HYDRULIC Make sure reative motion of the machine components produces bending rather than twisting of the hose. Hose should be routed so that the flex is in the same plane as the equipment movement. 372 Phone:

373 WIRE RID HYDRULIC HOSE & FITTINGS SE100 R1 T/ 1SN Construction Tube: Oil resistant Synthetic Rubber. Reinforcement: 1-Wire raid. High tensile steel wire. Cover: Oil, weather and abrasion resistant Synthetic Rubber. Hose is shipped in bundles. Reel price available upon request. pplication and Temperature Range Petroleum base hydraulic fluids and lubricating oils within a temperature range of -40 F to +212 F (-40 C to C). Water, water/ glycol and water/ oil emulsion hydraulic fluids up to +185 F (+85 C). ir within a temperature range of -40 F to +158 F (-40 C to + 70 C). Maximum operating temperature: 125 C (257 F). ir Maximum termperature: 70 C (160 F). Part # I.D. O.D. Working urst Min. / Weight Roll Length/ Pressure Pressure Radius /FT feet 100R1025 1/ R1038 3/ R1050 1/ R1075 3/ R R / R / SE100 R2 T/ 2SN Construction Tube: Oil resistant Synthetic Rubber. Reinforcement: 2-Wire raid. High tensile steel wire. Cover: Oil, weather and abrasion resistant Synthetic Rubber. Hose is shipped in bundles. Reel price available upon request. pplication and Temperature Range Petroleum base hydraulic fluids and lubricating oils within a temperature range of -40 F to +212 F (-40 C to C). Water, water/ glycol and water/ oil emulsion hydraulic fluids up to +185 F (+85 C). ir within a temperature range of -40 F to +158 F (-40 C to + 70 C). Part # I.D. O.D. Working urst Min. / Weight Roll Length/ Pressure Pressure Radius /FT feet 100R2025 1/ R2038 3/ R2050 1/ R2075 3/ R R / R / HYDRULIC Fax: sales@global-hose.com 373

374 HYDRULIC HOSE & FITTINGS HOSE INSTLLTION SE100 R17 Construction Tube: Oil resistant Synthetic Rubber. Reinforcement: one (upto 1/2") or two (from 5/8") high tensile steel wire braids. Cover: Oil, weather and abrasion resistant Synthetic Rubber. Hose is shipped in bundles. Reel price available upon request. pplication and Temperature Range Petroleum base hydraulic fluids and lubricating oils within a temperature range of -40 F to +257 F (-40 C to C). Water, water/ glycol and water/ oil emulsion hydraulic fluids up to +185 F (+85 C). ir within a temperature range of -40 F to +158 F (-40 C to + 70 C). Part # I.D. O.D. Working Pressure urst Pressure Min. / Radius Weight /FT Roll Length/ feet 100R / R / R / R / R SE100 R16 Construction Tube: Oil resistant Synthetic Rubber. Reinforcement: 2-Wire raid. High tensile steel wire. Cover: Oil, weather and abrasion resistant Synthetic Rubber. Hose is shipped in bundles. Reel price available upon request. pplication and Temperature Range Petroleum base hydraulic fluids and lubricating oils within a temperature range of -40 F to +212 F (-40 C to C). Water, water/ glycol and water/ oil emulsion hydraulic fluids up to +185 F (+85 C). ir within a temperature range of -40 F to +158 F (-40 C to + 70 C). HYDRULIC Part # I.D. O.D. Working Pressure urst Pressure Min. / Radius Weight /FT Roll Length/ feet 100R / R / R / R / R Phone:

375 HYDRULIC DPTERS HIGH PRESSURE LL VLVES Two-Way Part Number Nominal Thread Working Size Pressure GE2-14-NPT 1/4" 1/4" NPTF 7250 PSI GE2-38-NPT 3/8" 3/8" NPTF 7250 PSI GE2-12-NPT 1/2" 1/2" NPTF 7250 PSI GE2-34-NPT 3/4" 3/4" NPTF 5800 PSI GE2-1-NPT 1" 1" NPTF 5075 PSI *GE2-114T-NPT 1" 1-1/4" NPTF 5075 PSI *GE2-112T-NPT 1" 1-1/2" NPTF 5075 PSI *GE2-2T-NPT 2" 2" NPTF 5075 PSI KH Part Number Nominal Thread Working Size Pressure GE2-04-SE 1/4" 7/16-20 UNF 7250 PSI GE2-06-SE 3/8" 9/16-18 UNF 7250 PSI GE2-08-SE 1/2" 3/4-16 UNF 7250 PSI GE2-12-SE 3/4" 1-1/16-12 UNF 5800 PSI GE2-16-SE 1" 1-5/16-12 UNF 5075 PSI *G2-20T-SE 1" 1-5/8-12 UNF 5075 PSI *G2-24T-SE 1" 1-7/8-12 UNF 5075 PSI *G2-32T-SE 2" 2-1/2-12 UNF 5075 PSI * = Reduced Port Only Full Port available by special quote. Temp Rating = F Construction: Steel ody, all, Stem Zinc Chromate Plate una O Rings (Viton on request) Delrin all Seats Three-Way Part Number Nominal Thread Working Size Pressure GE3L-14-NPT 1/4" 1/4" NPTF 5800 PSI GE3L-38-NPT 3/8" 3/8" NPTF 5800 PSI GE3L-12-NPT 1/2" 1/2" NPTF 5800 PSI GE3L-34-NPT 3/4" 3/4" NPTF 5075 PSI GE3L-1-NPT 1" 1" NPTF 5075 PSI *GE3L-114T-NPT 1 1/4" 1 1/4" NPTF 5075 PSI *GE3L-112T-NPT 1 1/2" 1 1/2" NPTF 5075 PSI *GE3L-2T-NPT 2" 2" NPTF 5075 PSI K3 Part Number Nominal Thread Working Size Pressure GE3L-04-SE 1/4" 7/16-20 UNF 5800 PSI GE3L-06-SE 3/8" 9/16-18 UNF 5800 PSI GE3L-08-SE 1/2" 3/4-16 UNF 5800 PSI GE3L-12-SE 3/4" 1-1/16-12 UNF 5075 PSI GE3L-16-SE 1" 1-5/16-12 UNF 5075 PSI *G3L-20T-SE 1 1/4" 1-5/8-12 UNF 5075 PSI *G3L-24T-SE 1 1/2" 1-7/8-12 UNF 5075 PSI *G3L-32T-SE 2" 2-1/2-12 UNF 5075 PSI * = Reduced Port Only vailable in Reduced Port Full Port available by special quote. Temp Rating = F Construction: Steel ody, all, Stem Zinc Chromate Plate una O Rings (Viton on request) Delrin all Seats HYDRULIC lso vailable in Stainless Steel Fax: sales@global-hose.com 375

376 CCESSORIES (Charlynn 101 / Danfoss DH / White HS / Parker ME-M-TE-TJ / -RR-US HP) The MMPH series gear set, shaft distribution flow, hydraulic motor is a compact, high efficient, low speed high torque design which can be used in either parallel or series systems. HYDRULIC MOTOR Part # MMPH50 MMPH80 MMPH100 MMPH125 MMPH160 MMPH200 MMPH250 MMPH315 MMPH Displacement cm3/rev(cu.in/rev) 51.7 (3.15) 77.7 (4.75) 96.2 (5.9) 118 (7.2) 156 (9.5) 190 (11.6) 231 (14.1) 312 (19) 387 (23.6) Max Speed rpm Cont Int Max Torque Cont. 81 (717) 129(1140) 161(1425) 202(1790) 245(2170) 286(2530) 360(3185) 406(3575) 435(3850) NW (in.lbs) Int. 108(956) 171(1514) 213(1885) 268(2372) 342(3026) 390(3450) 456(4035) 505(4470) 533(4717) Max performance Cont. 7(9.4) 9.1(12.2) 9(12.1) 9.1(12.2) 8.7(11.65) 8.1(10.85) 8.2(11) 7.2(9.7) 6.1(8.2) KW/ (HP) Int. 8.9(12) 11.8(15.8) 11.9(15.95) 11.8(15.8) 11.9(15.95) 10.9(14.7) 10.1(13.5) 8.6(11.5) 7.2(9.65) Max Differential Cont. 12.5(1840) 12.5(1840) 12.5(1840) 12.5(1840) 12.5(1840) 11(1625) 11(1625) 11(1625) 10(1450) Mpa/ (PSI) Int. 16.5(2425) 16.5(2425) 16.5(2425) 16.5(2425) 16.5(2425) 16.5(2425) 14(2060) 12.5(1840) 10.5(1540) Max flow Cont. 45(11.85) 60(15.8) 60(15.8) 60(15.8) 60(15.8) 60(15.8) 60(15.8) 60(15.8) 60(15.8) L/min. / (gpm) Int. 50(13.15) 75(19.75) 75(19.75) 75(19.75) 75(19.75) 75(19.75) 75(19.75) 75(19.75) 75(19.75) Weight lb ORDERING INFORMTION MMPH MODEL SERIES MMPH (GEROTOR) MMRS (GEROTOR) 50 H2 K P FRME SIZE (cu.in/rev) MMPH 50 (3.15) 80 (4.74) 100 (5.87) 125 (7.19) 160 (9.49) 200 (11.59) 250 (15.25) 315 (19.02) 400 (23.57) MMRS 50 (3.13) 80 (4.92) 100 (6.15) 125 (7.62) 160 (9.59) 200 (12.15) 250 (15.38) 315 (19.2) 375 (22.58) MOUNTING FLNGE TYPE H4-4 olt H2 - SE "" 2 olt H6 - Magneto DRIVE SHFT K - 1 Inch Woodruff Key S - SE - 6 Spline H - 1 Inch parallel 0.40 dia. crosshole H1-1 Inch parallel 0.31 dia. crosshole (Charlynn 103 & 158 / Danfoss DS / Parker ME-M-TE-TJ / RR-US HR) The MMRS series advanced gear set, shaft distribution flow, hydraulic motor is a compact, low noise, highly efficient torque low speed design. The gear set also affords a reliable smooth start-up at low pressure. The special design of the drive linkage and high pressure capability of the shaft seal provides a long life and these motors can be used in either series or parallel operation. PORT SIZE P - 1/2 NPTF S - 7/8-14 SE "O" Ring F - Manifold HYDRULIC Part # MMRS50 MMRS80 MMRS100 MMRS125 MMRS160 MMRS200 MMRS250 MMRS315 MMRS Displacement cm3/rev(cu.in/rev) 51.3 (3.13) 80.6 (4.92) (6.15) (7.62) (9.59) (12.15) 252 (15.38) (19.2) 370 (22.58) Max Speed rpm Rated Cont Max Torque Cont. 100(885) 190(1682) 240(2124) 292(2584) 363(3273) 358(3168) 352(3115) 360(3186) 420(3717) NW (in.lbs) Int. 126(1115) 220(1947) 280(2478) 340(3010) 430(3806) 448(3965) 470(4159) 470(4159) 548(4850) Max performance Cont. 7.7(10.3) 15(20.10) 15(20.10) 14(18.75) 14(18.75) 11(14.75) 9(12.10) 7.2(9.7) 6.1(8.2) KW/ (HP) Int. 9.7(13) 17(22.8) 17(22.8) 16(21.45) 16(21.45) 14(18.75) 12(16.10) 9(12.10) 12(16.10) Max Differential Cont. 14(2061) 17.5(2576) 17.5(2576) 17.5(2576) 16.5(2429) 13(1914) 11(1619) 8.5(1251) 8.5(1251) Mpa/ (PSI) Int. 17.5(2576) 20(2944) 20(2944) 20(2944) 20(2944) 17.5(2576) 14(2061) 11.5(1693) 11.5(1693) Max flow Cont. 40(10.5) 60(15.8) 60(15.8) 60(15.8) 60(15.8) 60(15.8) 60(15.8) 60(15.8) 60(15.8) L/min. / (gpm) Int. 50(13.1) 75(19.75) 75(19.75) 75(19.75) 75(19.75) 75(19.75) 75(19.75) 75(19.75) 75(19.75) Weight lb Phone:

377 HYDRULIC GER PUMP MODEL # MGP-F20 luminium construction. 8 Displacement sizes from 0.36 to 1.52 cu. in/rev. Mounting flange is SE -2 bolt. Ports are SE-12 inlet and SE-10 outlet. Drive shaft is a 5/8 inch diameter straight with 5/32 straight key. CCESSORIES Recommended working conditions: Filtration 25 micron or better. Oil Viscosity 6 to 200 cst. Inlet pressure 12 to 32 psi abs. Oil Temperature -25 to 55 degrees C (-12 to 175 F ). mbient -22 to 55 C (-8 to 130 F ). Part # Displacement PSI Speed RPM Weight cu.in/rev Rated Max Lbs MGP-F MGP-F MGP-F MGP-F MGP-F MGP-F MGP-F MGP-F INSTLLTION DT Part # Millimeters Inches Millimeters Inches MGP-F MGP-F MGP-F MGP-F Part # Millimeters Inches Millimeters Inches MGP-F MGP-F MGP-F MGP-F ORDERING INFORMTION MGP luminum Gear Pump F20 High Pressure Series 16 Displacement cm3/rev (see chart) 06/08/10/12/14/16 20/25 P Drive Shaft P-5/8 Dia Straight P1-3/4 Dia Straight S9-Spline 9 tooth C Rotation Direction C-Clockwise -Counter Clockwise (viewed from drive shaft end) HYDRULIC Fax: sales@global-hose.com 377

378 CCESSORIES MODEL # MGP-F10 ll luminium construction. 7 Displacement sizes from 0.07 to 0.37 cu. in/rev. Mounting flange is SE -2 bolt. Ports are SE-8 inlet and SE-6 outlet. Drive shaft is a 1/2 inch straight shaft with 1/8 key. HYDRULIC GER PUMP Recommended working conditions: Filtration 25 micron or better. Oil Viscosity 6 to 200 cst. Inlet pressure 12 to 32 psi abs. Oil Temperature -25 to 55 degrees C (-12 to 175 F ). mbient -22 to 55 C (-8 to 130 F ). Part # Displacement PSI Speed RPM Weight cu.in/rev Rated Max Lbs MGP-F MGP-F MGP-F MGP-F MGP-F MGP-F MGP-F INSTLLTION DT Part # Millimeters Inches Millimeters Inches MGP-F MGP-F MGP-F MGP-F Part # Millimeters Inches Millimeters Inches MGP-F MGP-F MGP-F ORDERING INFORMTION HYDRULIC MGP luminum Gear Pump F10 High Pressure Series 16 Displacement cm3/rev (see chart) 13/20/27/34 41/51/61 P Drive Shaft P-5/8 Dia Straight P1-3/4 Dia Straight S9-Spline 9 tooth C Rotation Direction C-Clockwise -Counter Clockwise (viewed from drive shaft end) Phone:

379 CHECK VLVE HRD SET CRON STEEL CONSTRUCTION - 5lb or 65lb Cracking Pressure vailable vailable w/ NPT or SE threads ( NPT Female both ends ) C Part # Size Inches C Inches Rated Flow gpm or 65 1/4 NPT or 65 3/8 NPT or 65 1/2 NPT or 65 3/4 NPT or 65 1 NPT or /4 NPT or /2 NPT or 65 7/16-20 SE or 65 9/16-20 SE or 65 3/4-16 SE or /6-12 SE or /16-12 SE or /8-12 SE or /8-12 SE Rated Pressure: Sizes 2 thru psi / Sizes 10 thru psi CCESSORIES HYDRULIC HOSE PROTECTOR Tough abrasion resistant self-adhering neoprene wrap Protects against cuts and abrasions Can be easily applied to hoses of varying diameters, even after hose is installed on equipment. Covers and protects wear areas Chemical resistant neoprene resists oil, gasoline, and solvents Flexible self-adhering wrap material allows hoses to flex and bend. Wrap can also be used to bundle hoses and cables. Performance temperature range -20 F to 200 F Step 1: Clean hose of all dirt, grime and grease in the application area. Part # Description MHP112 12' Kit MHP150 50' Kit MHP ' Kit Stored in G warehouse. Step 2: Remove paper backing as Hose Protector is applied. Wrap tightly at a slight angle while overlapping in notched area. Step 3: To finish, wrap both ends of Hydraulic Hose Protector with PVC tape. MTERIL COVERGE CHRT 12' Roll 50' Roll 300' Roll 3/8" Hydraulic Hose I.D. 52" 217" 1,302" 1/2" Hydraulic Hose I.D. 40" 167" 1,002" 3/4" Hydraulic Hose I.D. 29" 121" 726" 1" Hydraulic Hose I.D. 24" 100" 600" HYDRULIC Fax: sales@global-hose.com 379

380 CCESSORIES SFEGURD SPIRLS SFEGURD SPIRLS - PROTECTION FOR HYDRULIC HOSES WHT IS SPIRL WRP: Spiral wrap is the proven way to protect hose, wire, cable, etc... against chaffing, rubbing, crushing, ultraviolet and other environmental hazards that cause premature failure. COST SVINGS: Used effectively on all types of hoses, ropes, wires and cables. Users have realized a dramatic increase in serviceable life and reduction in costly repairs and down time. MTERIL: Heavy wall, high Grade HDPE, polyethylene resin, high tensile strength, thermal plastic. RESILIENCE: Has a high resistance against ultra violet weathering and a wide temperature range. ( F) Proprietary extrusion method gives the final product smooth round, edges, which are non-abrasive, greater strength & durability. C HYDRULIC Part # Pitch Inches Coil Wt. Coil Lgth lack Yellow Spiral Size (C) OD () ID () lbs. feet 25C100 25C100Y 1/4" (#4) HYDRULIC HOSE / C100 38C100Y 3/8" (#6) HYDRULIC HOSE / C100 50C100Y 1/2" (#8) & 5/8" (#10) HYDRULIC HOSE C100 75C100Y 3/4" (#12) HYDRULIC HOSE / C C100Y 1" (#16) & 1-1/4" (#20) HYDRULIC HOSE / * More sizes & colors available. * Shipped in 100'FT coils only. 380 Phone:

381 IR RETHERS SCREW-ON TYPE IR RETHERS CCESSORIES 1/4 To 1 Inch NPT Steel Model 40 Micron reather D Part Number Flow cfm NPT C D CH Micron M / M / M / M / M C CH FILTER FILLER RETHERS Chrome Plated Cap 40 Micron reather 3" asket Length Lockable Options Plastic asket Standard Part Number C D E MF C E D PROTECTIVE HOSE COVERINGS Material: Cordura or nso-tex bulk nylon fiber yarn. Cordura is a registered trademark of Dupont. nso-tex is a registered trademark of llied Fibers. Thickness:.090" ±.020" Color: lack Doubled Flat Flammability: Passes FMVSS 302 horizontal flame test, MSH accepted. Temperature: Maximum ambient temperature 250ºF Packaging: 300ft. rolls. Only Part Number Flat Width ID MHS /3" 0.79" MHS /2" 0.90" MHS /3" 1.00" MHS /8" 1.06" MHS /8" 1.22" MHS /4" 1.38" MHS /2" 1.42" MHS /8" 1.59" MHS /8" 1.75" MHS-185 3" 1.81" MHS /8" 2.19" MHS /8" 2.38" MHS /4" 2.63" MHS /4" 2.88" MHS /8" 3.66" HYDRULIC Fax: sales@global-hose.com 381

382 PIPE LED FREE RSS FITTINGS 90 0 FORGED FEMLE ELOW MEETS 1953 CP Part # Thread size NPTF LF 1/4" LF 3/ LF 1/ LF 3/ UNION FORGED TEE Part # Thread size NPTF LF 3/ LF 1/ LF 3/ STREET ELOW Part # Thread size NPTF LF 1/8" LF 1/4" LF 3/ LF 1/ LF 3/ COUPLING Part # Thread size NPTF LF 1/ LF 1/ LF 3/8" LF 1/ LF 3/ HEX USHING Part # Thread size NPTF LF 1/8" LF 1/ LF 3/ LF 1/ REDUCING COUPLING Part # Thread size NPTF MxF LF 1/4 x 1/ LF 3/8 x 1/ LF 1/2 x 1/ LF 1/2 x 3/ LF 3/4 x 1/ SQURE HED PLUG LED FREE Part # Thread size NPTF LF 1/2 x 3/ LF 3/4 x 1/ Part # Thread size NPTF LF 1/8" LF 1/ LF 1/ LF 3/ Phone:

383 LED FREE RSS FITTINGS PIPE COUNTERSUNK HEX PLUG EXTENDER DPTER Part # Thread size NPTF LF 3/ LF 1/ CORED HEX PLUGS Part # Thread size NPTF FxM LF 1/4" x 1/4" 2.48 MLE RNCH TEE Part # Thread size NPTF LF 1/ LF 1/ CLOSE NIPPLE Part # Thread size NPTF LF 3/ STREET TEE/ SERVICE TEE Part # Thread size NPTF LF 1/8" LF 1/ LF 3/ LF 1/ LF 3/ Part # Thread size NPTF LF 1/ LF 3/ RIGID MLE DPTER LONG NIPPLE Part # Thread size NPTF LF 1/4" x 1-1/2" LF 3/8 x 1-1/2" LF 1/2 x 1-1/2" 4.55 HEX NIPPLE Part # Thread size NPTF LF 1/8" LF 1/ Part # Hose I.D. x Male NPTF LF 3/16 x 1/ LF 1/4 x 1/ LF 1/4 x 1/ LF 5/16 x 1/ LF 5/16 x 1/ LF 3/8 x 1/ LF 3/8 x 1/ LF 3/8 x 3/ LF 3/8 x 1/ LF 1/2 x 1/ LF 1/2 x 3/ LF 1/2 x 1/ LF 5/8 x 1/ LF 3/4 x 1/ LF 3/4 x 3/ LED FREE Fax: sales@global-hose.com 383

384 PIPE LED FREE RSS FITTINGS MENDER/ SPLICER DUL 45 / 37 FLRE SWIVEL Part # Hose I.D. x Hose I.D LF 1/ LF 3/8" LF 1/ Part # Hose I.D. x Dual Seat LF 1/4 x 1/ MLE DPTER RIGID FEMLE DPTER Part # Hose I.D. x Female NPTF LF 1/4 x 1/ LF 3/8 x 1/ LF 3/8 x 3/ LF 3/8 x 1/ LF 1/2 x 1/ FORGED HOSE R 90 ELOW Part # Hose I.D. x Male NPTF LF 1/4 x 1/ LF 1/4 x 1/ LF 3/8 x 1/ LF 3/8 x 3/ LF 1/2 x 3/ LF 1/2 x 1/ SE/JIC DUL 45 /37 FEMLE SWIVEL Part # Hose I.D. x Male NPTF LF 1/4 x 1/ LF 5/16 x 1/ LF 5/16 x 1/ LF 3/8 x 1/ LF 3/8 x 3/ HOSE R TEES Part # Hose I.D. x Female 45 / LF 1/4" x 1/4" 4.49 GRDEN HOSE SWIVEL - FGH X FGH WSHER INCLUDED LED FREE Part # Hose arb Size LF 1/ LF 3/ Part # FGH X FGH LF 3/4 x 3/ Phone:

385 LED FREE RSS FITTINGS PIPE SWIVEL - FGH X FEMLE PIPE WSHER INCLUDED MLE END ONLY Part # FGH x Female NPTF LF 3/4 x 1/ LF 3/4 x 3/ RIGID - MGH X FEMLE PIPE Part # Hose arb x MGH LF 1/2 x 3/4" GRDEN HOSE CP Part # MGH x Female NPTF LF 3/4 x 3/ Part # Size LF 3/4 Die cast 4.40 RIGID - MGH X MLE PIPE SE 45 FLRE SHORT ROD NUT Part # MGH x Male NPTF LF 3/4 x 3/ LF 3/4 x 3/4 x 1/ FEMLE SWIVEL ONLY Part # Thread Size UNF LF 1/4" LF 3/ LF 1/ SHORT FORGED NUT Part # Hose arb x FGH LF 1/2 x 3/4" Part # Thread Size UNF LF 3/ LF 1/ LF 5/ LED FREE Fax: sales@global-hose.com 385

386 PIPE LED FREE RSS FITTINGS FLRED CP 90 MLE ELOW Part # Thread Size UNF LF 1/ LF 3/ LF 1/ LF 5/ UNION Part # Thread Size UNF LF 1/ LF 3/ LF 1/ LF 5/ FEMLE DPTER Forged Elbow Part # Male Flare x Male NPTF LF 1/4 x 1/ LF 1/4 x 1/ LF 1/4 x 3/ LF 3/8 x 1/ LF 3/8 x 3/ LF 3/8 x 1/ LF 1/2 x 3/ LF 1/2 x 1/ LF 1/2 x 3/ FORGED MLE RUN TEE Part # Male Flare x Female NPTF LF 3/8 x 3/ LF 3/8 x 1/ LF 1/2 x 3/ LF 1/2 x 1/ LF 1/2 x 3/ MLE DPTER Part # Male Flare x Male NPTF (1&3) x LF 1/2 x 1/ FORGED SWIVEL LED FREE Part # Male Flare x Male NPTF LF 1/4 x 1/ LF 1/4 x 1/ LF 1/4 x 1/ LF 3/8 x 1/ LF 3/8 x 1/ LF 3/8 x 3/ LF 3/8 x 1/ LF 1/2 x 3/ LF 1/2 x 1/ LF 1/2 x 3/ LF 3/4 x 3/ Part # Female Flare UNF LF 3/ LF 1/ LF 5/ Phone:

387 LED FREE RSS FITTINGS PIPE RSS SLEEVE FERRULES REDUCING UNION Part # Size LF 1/ LF 3/ LF 1/ RSS NUT Part # Size LF 3/8 x 1/ LF 1/2 x 3/ LF 5/8 x 1/ TEE Forged Part # Size LF 1/ LF 3/ LF 1/ CP Part # Size LF 1/ LF 3/ LF 1/ LF 5/ UNION ELOW Part # Size LF 3/ UNION Forged Part # Size LF 3/ LF 1/ FEMLE DPTER Part # Size LF 1/ LF 3/ LF 1/ LF 5/ LF 7/ Part # Comp. X Female NPTF LF 1/4 x 3/ LF 3/8 x 1/ LF 1/2 x 3/ LF 5/8 x 1/ LF 5/8 x 3/ LF 7/8 x 3/ LED FREE Fax: sales@global-hose.com 387

388 PIPE LED FREE RSS FITTINGS MLE DPTER COMP X MLE PIPE-NGLE Part # Comp. X Male NPTF LF 1/4 x 1/ LF 1/4 x 1/ LF 1/4 x 1/ LF 3/8 x 1/ LF 3/8 x 3/ LF 1/2 x 1/ LF 1/2 x 3/ LF 5/8 x 1/ LF 5/8 x 3/ Part # Comp x Male Pipe LF 1/4 x 1/ COMP X COMP MLE ELOW Part # Comp x Comp LF 1/ LF 3/ SELF PIERCING SDDLE VLVES Part # Comp. X Male NPTF LF 1/4 x 1/ LF 1/4 x 3/ LF 3/8 x 1/ LF 3/8 x 3/ LF 3/8 x 1/ LF 1/2 x 1/ LF 5/8 x 1/ NEEDLE VLVES COMP X MLE PIPE FITS 3/8 OD THRU 3/4 OD SELF PIERCING NEEDLE VLVE KIT #M-104-VSP INDIVIDULLY GGED WITH NEEDLE VLVE SDDLE CLMP 2 NUTS 2 OLTS & WSHERS Has brass sleeve for copper tube installation & delrin sleeve & brass insert for plastic tube installation. Part # Tube O.D. Min Pkg Qty LF 1/ #M-302-SV1.60 LED FREE Part # Comp x Male Pipe LF 1/4 x 1/ LF 1/4 x 1/ Phone: