Compression Fittings
|
|
- Sheena Cameron
- 5 years ago
- Views:
Transcription
1 RSS COPRESSION Compression Fittings RSS FITTINS Thread - Tube O.D. 1/8 /16 1/4 5/16 /8 7/16 1/2 5/8 /4 7/8 Thread - 5/16-24 /8-24 7/ /2-24 9/ / / / /8-18 Working Pressure Typical pplication Use with copper, aluminum and thermoplastic tubing. Not recommended for steel tubing. anufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Not recommended for application using gaseous media. Pressure See table above for working pressures at 7 o F. Vibration Fair resistance - use long nut when greater vibration resistance is needed. Temperature Range -65 o F to +250 o F (-5 o C to +121 o C) range at maximum operating pressures. (Refer to tubing temperature range.) aterial C60 rass for barstock fittings. C77 rass for forged fittings. Used With luminum, copper, brass and plastic tubing. Plastic tubing requires insert. Not recommended for steel tubing. without notice. Please call us when dimensions are critical. Conformance eets specifications and standards of S, SE and SE. ssembly Instructions 1- Cut tubing to desired length. 2- Slide nut and then sleeve on tube. Threaded end of nut must face toward fitting. - Insert tubing into fitting body. e sure tubing is bottomed on fitting shoulder. 4- Lubricate threads and assemble nut to fitting body. 5- Tighten nut hand tight. From that point, tighten with a wrench the number of turns indicated in the chart below. Tube 1/8" thru 1/4" 5/16" /8" thru 1" dditional Turns from Hand Tight 1-1/4" 1-/4" 2-1/4" L at the end of a Part# means Light Pattern -These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. 72 Tolerance +/-.02 on all dimensions. Dimension data can change ctual Profile of Compression Threads F These are NOT Lead Free See pages for Lead Free products
2 RSS FITTINS COPRESSION RSS SLEEVE FERRULES SE# Part # pprox / / / / / / / / / / RSS DELRIN SLEEVE 60-P Part # pprox / / / / / SELF-LIN SLEEVE - See page 88 for self-align sleeve assemblies 601 Part # pprox / / / Part # pprox / / * Note: To buy compression fittings with self-align sleeve, simply delete the 18- prefix on the same size compression fitting and substitute 27- prefix. Pricing available upon request. 72 Hour lead time. Some product stocked in Houston and tlanta. Fax F sales@midlandindustrial.com 7
3 COPRESSION RSS FITTINS RSS RSS INSERT 6-I 60E 200 6PT SLEEVE Part # pprox. Wall / / / / / / / / / / / / RSS NUT SE# Part # Thread pprox /8 5/ /16 / L 1/4 7/ /4 7/ /16 1/ L /8 9/ /8 9/ /16 5/ L 1/2 11/ /2 11/ L 5/8 1/ /8 1/ / /8 1-1/ NICKEL PLTED NUT Part # pprox / / / / These are NOT Lead Free See pages for Lead Free products Some product stocked in Houston and tlanta. 74 F
4 RSS FITTINS COPRESSION LON NUT COPRESSION - Can be assembled on any compression fitting 161 Part # pprox / / / / /8" RSS ore sizes available * Note: To buy compression fittings with long nut, simply delete the 18- prefix on the same size compression fitting and substitute a 24- prefix. Pricing available upon request. 72 hour lead time. CPTIVE SLEEVE NUT - See captive sleeve fittings on page CP REK-WY NUT L 81L Part # pprox / / / / / / / * Note: To buy compression fittings with captive sleeve, simply delete the 18- prefix on the same size compression fitting and substitute a 26- prefix. Pricing available upon request. 72 hour lead time. 1-Piece Fiting Part # pprox / / * Threaded sleeve fittings on page CC N5CT Part # pprox / / / / COPRESSION PLU CSP Part # pprox / / Fax F sales@midlandindustrial.com 75
5 COPRESSION RSS FITTINS UNION SE# RSS -62 Part # pprox / / L 1/ / / L / / / L 1/ / L 5/ / / L 7/ / REDUCIN UNION 62-R Part # pprox /4 x 1/ /4 x / /16 x 1/ /8 x 1/ /8 x 5/ /2 x / /8 x / /8 x 1/ /8 x 5/ ULKHED UNIONS 62H SE# Part # 1 2 pprox / / ULKHED NUTS Dimension data can change without notice. Please call us when dimensions are critical. Part # pprox / / / F Some product stocked in Houston and tlanta.
6 RSS FITTINS COPRESSION LL CHECK VLVE - in. Working pressure psi Part # Tube OD x pprox. ale NPTF /8 x 1/ /4 x 1/ /8 x 1/ RSS TEE C ody ody Forged arstock 2 SE# Part # ody pprox / * 1/ / * / / * 1/ / * 5/ / * / / * 1/ / / / * arstock FORED REDUCIN TEE 1 64-R ody 2 Part # ody pprox. 1 x 2 x /4 x 1/4 x 1/ /4 x 1/4 x / /8 x 1/4 x 1/ /8 x /8 x 1/ /2 x 1/2 x 1/ /2 x 1/2 x / /8 x 5/8 x / /8 x 5/8 x 1/ Some product stocked in Houston and tlanta. Fax F sales@midlandindustrial.com 77
7 RSS COPRESSION UNION ELOW 65 SE2 165C 265C Forged ody Forged arstock REDUCIN ELOW - Forged arstock SE# RSS FITTINS Part # ody pprox * 1/ / * / / * 1/ / * 5/ / / * 1/ / / / * arstock ody Part # ody pprox /8 x 1/ /2 x / /8 x / R TNK DPTER DRILLED THRU (NO STOP) 68-T 682C 80F Part # Comp. X pprox. ale NPTF /4 x 1/ /4 x 1/ /8 x 1/ /8 x / /8 x 1/ /2 x / /2 x 1/ /8 x 1/ COP X SWET DPTER Part # Comp. X pprox. Sweat dapter /8 x 1/2 nom.swt S Lead Free fittings available on pgs F
8 RSS FITTINS FELE DPTER 66 SE# COPRESSION Part # Comp. X pprox /8 x 1/ /16 x 1/ /16 x 1/ L 1/4 x 1/ /4 x 1/ L 1/4 x 1/ /4 x 1/ /4 x / /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ L /8 x 1/ /8 x 1/ L /8 x / /8 x / /8 x 1/ /8 x / /2 x 1/ L 1/2 x / /2 x / L 1/2 x 1/ /2 x 1/ /2 x / /8 x / L 5/8 x 1/ /8 x 1/ /8 x / /4 x 1/ /4 x / /8 x 1/ /8 x / RSS SILENCE IS HOLY. IT DRWS PEOPLE TOETHER ECUSE ONLY THOSE WHO RE COFORTLE WITH ECH OTHER CN SIT WITHOUT SPEKIN. - NICHOLS SPRKS Dimension data can change without notice. Please call us when dimensions are critical. Fax F sales@midlandindustrial.com 79
9 COPRESSION RSS FITTINS LE DPTER SE# RSS 68 Part # Comp. X pprox. ale NPTF /8 x 1/ /8 x 1/ /16 x 1/ /16 x 1/ L 1/4 x 1/ /4 x 1/ L 1/4 x 1/ /4 x 1/ /4 x / /4 x 1/ /16 x 1/ L 5/16 x 1/ /16 x 1/ /16 x / /16 x 1/ L /8 x 1/ /8 x 1/ L /8 x 1/ /8 x 1/ L /8 x / /8 x / L /8 x 1/ /8 x 1/ /8 x / /16 x 1/ /16 x / L 1/2 x 1/ /2 x 1/ L 1/2 x / /2 x / L 1/2 x 1/ /2 x 1/ /2 x / /8 x / /8 x 1/ /8 x / /4 x 1/ /4 x / /8 x 1/ /8 x / /8 x IN THREE WORDS I CN SU UP EVERYTHIN I'VE LERNED OUT LIFE: IT OES ON. - ROERT FROST 80 F
10 RSS FITTINS COPRESSION LE ELOW SE# ody ody C SE1 169C Forged arstock Part # Comp. X ody pprox. ale NPTF /8 x 1/ * 1/8 x 1/ /16 x 1/ * /16 x 1/ /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ * 1/4 x 1/ /4 x / /4 x 1/ /16 x 1/ * 5/16 x 1/ /16 x 1/ * 5/16 x 1/ /16 x / /16 x 1/ /8 x 1/ * /8 x 1/ /8 x 1/ * /8 x 1/ /8 x / * /8 x / /8 x 1/ * /8 x 1/ /8 x / /16 x 1/ /2 x 1/ /2 x / * 1/2 x / /2 x 1/ * 1/2 x 1/ /2 x / /8 x / /8 x 1/ * 5/8 x 1/ /8 x / /4 x 1/ /4 x / /8 x / * arstock RSS Dimension data can change without notice. Please call us when dimensions are critical. Some product stocked in Houston and tlanta. Fax F sales@midlandindustrial.com 81
11 COPRESSION RSS FITTINS FORED LE RUN TEE RSS C ST 2 ody Part # Comp. X ale NPTF (1&) X 2 ody pprox /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x / /2 x / /2 x 1/ /8 x 1/ /4 x 1/ LE RNCH TEE SE# ST1 172C 1 2 ody Forged 1 2 ody arstock Part # Comp. X ale NPTF (1&2) X ody pprox /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ * /8 x 1/ /8 x / /8 x 1/ /2 x 1/ * 1/2 x / /2 x / /2 x 1/ /8 x 1/ /4 x 1/ /4 x / * arstock 82 F
12 RSS FITTINS COPRESSION FELE ELOW SE# C SE 170C ody Forged arstock ody Part # Comp. X ody pprox /8 x 1/ /16 x 1/ /4 x 1/ * 1/4 x 1/ /4 x 1/ /4 x / /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x / /8 x 1/ /8 x / /2 x 1/ /2 x / /2 x 1/ /2 x / /8 x / /8 x 1/ /8 x / /4 x 1/ * arstock RSS FORED DROP-ER ELOW ody Part # Comp. X ody pprox /8 x 1/ SE-DE FORED TEE 1 2 C Part # Comp. X x ale NPTF 1x(2&) C pprox /4 x 1/ C ST Some product stocked in Houston and tlanta. Fax F sales@midlandindustrial.com 8
13 COPRESSION RSS FITTINS DPTER TEE RSS 1 C 2 ody Part # ale NPTF x x Comp. x (1&2) C ody pprox /8 x 1/ /8 x 1/ C FELE RNCH FORED TEE 1 78 ST C 2908 ody 2 Part # Comp. X (1&2)x ody pprox /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x / /2 x 1/ /2 x / /8 x 1/ ELOW SE# SE C ody Part # Comp. X ody pprox. ale NPTF /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x / /2 x / /2 x 1/ /8 x 1/ F Dimension data can change without notice. Please call us when dimensions are critical.
14 RSS FITTINS RDEN HOSE SWIVEL COPRESSION WSHER INCLUDED Part # Compression x 1 2 pprox. FH /4 x / /8 x / RSS Use with aluminum and copper tubing or plastic tubing with internal tube support. Not recommended for steel tubing. Easy to assemble, no flaring, two piece construction. For use on oil, air, water and grease lubrication systems. When design makes a dimension critical, contact us for information. NUT DOULE COPRESSION THREDED SLEEVE FITTINS Tube OD 1/8 /16 1/4 5/16 /8 Thread 5/16-24 /8-24 7/ /2-20 9/16-20 Working Pressure * For break away nut, see page 75. Part # pprox / / / / / LE DPTER Part # THRD Sleeve x pprox. ale NPTF /8 x * /8 x 1/ /16 x 1/ /4 x 1/ /16 x 1/ /8 x 1/ * 1/4-28 ale Thread Tapered. 90 ELOW ody arstock Part # THRD Sleeve x ody pprox. ale NPTF /8 x * /8 x 1/ /16 x 1/ /4 x 1/ * 1/4-28 ale Thread Tapered Fax F sales@midlandindustrial.com 85
15 RSS CPTIVE SLEEVE COPRESSION CS61 61C CPTIVE SLEEVE NUT LL CHECK VLVE CS86 RSS FITTINS FELE DPTER CS66 66C Part # / / / / / / / CS62 62C UNION Part # Tube OD x ale NPTF /8 x 1/ CS64 164C TEE Part # / / / / / /8"x/8"x1/4" / / Part # Comp. X /8 x 1/ /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x / /8 x 1/ /8 x / /2 x 1/ /2 x / /2 x 1/ CS68 68C LE DPTER CS65 165C UNION ELOW 86 Part # / / / /4 x / / / /8 x 1/ / / /8 x / C262L 62C ULKHED UNIONS Part # / / Part # / / / / / / Interchangeable with compress-align fittings. These are NOT Lead Free See pages for Lead Free products F Part # Comp. X ale NPTF /8 x 1/ /8 x 1/ /16 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ L 1/4" x 1/4" /4 x / /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x / /8 x 1/ /2 x 1/ /2 x / /2 x 1/ /2 x / /8 x / /8 x 1/2 6.90
16 RSS FITTINS CPTIVE SLEEVE COPRESSION CS69 169C LE ELOW CS72 172C LE RNCH TEE CPTIVE SLEEVE x LE PIPE NLE NEEDLE VLVE RSS Part # Comp. X ale NPTF /8 x 1/ /16 x 1/ /16" x 1/8" /16 x 1/ /4" x 1/8" /4 x 1/ /4 x 1/ /4 x / /16 x 1/ /16 x 1/ /16 x / /8 x 1/ /8 x 1/ /8 x / /8 x 1/ /2 x 1/ /2 x / /2 x 1/ /8 x / /8 x 1/ CS70 170C FELE ELOW Part # Comp. X /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ /2 x / /8 x / Part # Comp. X ale NPTF (1&2) X /4 x 1/ /4 x 1/ /16 x 1/ /16 x 1/ /8 x 1/ /8 x 1/ /8 x / /2 x / FORED LE RUN TEE CS71 171C Part # Comp. X ale NPTF (1&) X /8 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ /8 x / /2 x / CPTIVE SLEEVE x LE PIPE NEEDLE VLVE Part # Comp X ale Pipe /16 x 1/ X 1/4" x 1/8" * Heavy Pattern Part # Comp X ale Pipe /16 x 1/ /4 x 1/ X Heavy Pattern /4 x 1/ /16 x 1/ /16 x 1/ CPTIVE SLEEVE x CPTIVE SLEEVE NEEDLE VLVE Part # Comp X Comp / / / / Fax F sales@midlandindustrial.com 87
17 RSS SELF-LIN COPRESSION SELF-LIN SLEEVE Part # /8" /16" /4" 0.6 Part # /8" /2" 2.06 UNION UNION ELOW Part # / / TNK DPTER DRILLER THRU (NO STOP) RSS FITTINS LE DPTER Part # Comp. X ale NPTF /8 x 1/ /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /8 x 1/ /8 x 1/ /8 x / /8 x 1/ /2 x 1/ /2 x / /2 x 1/ /2 x / Part # / / / / / /2 x /8" LL CHECK VLVE Part # Tube OD x ale NPTF /8 x 1/ /4 x 1/ /8 x 1/ TEE Part # / / / /8 x/8"x1/4" /2"x1/2"x1/4" /2"x1/2"x/8" Part # /4"x1/8" /4"x1/4" /8"x/8" /2"x/8" 9.00 FELE DPTER Part # Comp. X /8 x 1/ /4 x 1/ /4 x / /4" x 1/2" /8 x 1/ /2 x / F FELE ELOW Part # Comp. X /4 x 1/ /4 x 1/ /8 x 1/ /2" x /8" /2" x 1/2" LE ELOW Part # Comp. X ale NPTF /8 x 1/ /16 x 1/ /4 x 1/ /4 x 1/ /4 x / /8 x 1/ /8 x 1/ /8 x / /8 x 1/ /2 x 1/ /2 x / /2 x 1/ /2 x /4 15.0
M M. P ipe BRASS BRASS FITTINGS F G. Actual outside diameters of pipe threads. Actual Male Thread Profiles
RSS FITTINS Pipe RSS Lead Free Fittings see pages 166-175 For ronze & Larger Sizes see pages 208-215 For SPT/ SPP see pages 116-117 P ipe Size 1/16 1/ 8 1/ 4 3/ 8 1/ 2 3/ 4 1 T hread Size e 1/16-27 1/8-27
More informationP ipe BRASS BRASS FITTINGS PIPE. Actual outside diameters of pipe threads. Actual Male Thread Profiles
RSS FITTINGS Pipe PIPE RSS For ronze & Larger sizes see pages 187-200 For SPT/ SPP see pages 112,113 P ipe Size 1/16 1/ 8 1/ 4 3/ 8 1/ 2 3/ 4 1 T hread Size e 1/16-27 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14
More informationBRASS BRASS FITTINGS 90 0 FEMALE ELBOW 90 0 FORGED FEMALE ELBOW 45 0 FEMALE ELBOW UNION TEE UNION FORGED TEE SAE# Approx. Wt. Lbs.
RSS FITTINGS RSS 90 0 FEMLE ELOW 2200P 3500 302 200 Part # Thread Size pprox. 28-001 1/8 0.55 0.56 0.09 28-002 1/4 0.78 0.68 0.13 28-003 3/8 0.84 0.81 0.16 28-004 1/2 1.09 1.00 0.34 28-005 3/4 1.16 1.25
More informationFAST-RITE INTERNATIONAL
FST-RITE INTERNTIONL arstock and Forged rass Fittings Valves Nipples & Fittings Plastic Fittings Hose Clamps Tubing Pneumatic Hose ccessories Hydraulic dapters PICTORIL TLE OF CONTENTS Pipe Fittings...1-13
More informationCompression Fittings
ompression Fittings TITN ompression Fittings are designed to comply with established industry standards. This economical fitting is available in a wide range of off-the-shelf sizes and styles. They are
More informationADAPTERS AND TUBE FITTINGS
DPTERS INDEX Section Pages Hose 15-67 Fittings 68-180 dapters and Tube Fittings 181-228 DPTERS ND TUE FITTINGS Description Page dapters raze and weld to 37 flare 221 raze and weld to split flange 220 SPP
More informationPoly-Tite Fittings. Order By part number and name.
oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer
More informationIntru-Lok Flareless Bite Type Fittings
Intru-ok Flareless Bite Type Fittings The Fitting Authority 400 atalog Intru-ok Flareless Bite Type Fittings uts, Ferrules, Inserts BIP Knurled ut BI ut BTI ut and Ferrule TI Ferrule TIP Expander / Insert
More informationCompression Style Pneumatic
Compression Style Pneumatic Compression Economical U isted Thermoplastic / Soft etal Tubing Parker etru-ok Captive Sleeve etric Tubing PT, BSPT, BSPP, etric Threads Compress-lign Captive Sleeve Two piece
More informationCompression Fittings 34 Series Inch
4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata
More informationCatalog 3501E Tube to ale PTF 169C-269C ale Elbow Union Tee Compression Style, Pneumatic 169P/269P 169P 169PS 169H 179C Elbow ale Elbow ong Elbow ale
Compression Style Pneumatic Compression Fittings... 5 Compress-lign Fittings... 13 Parker etru-ok Fittings... 20 Poly-Tite Fittings... 30 Hi-uty Flareless Tube Fittings... 42 The World Standard Catalog
More informationCONNECTORS VHP UNIONS LOW PRESSURE UNIONS THREADED ADAPTERS BARBED ADAPTERS PAGE 36 PAGE 40 PAGE 48 PAGE 58.
34 CONNECTORS VHP UNIONS PGE 36 LOW PRESSURE UNIONS PGE 40 THREDED DPTERS PGE 48 RED DPTERS PGE 58 SEE STRRED PRODUCTS FOR TOP SELLERS! Connectors Reference CONNECTORS 35 Connectors Reference Chart This
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More information8100, 8200, , 8202, 8203, 8204, 8205, 8206
800, 8200, 8300 820, 8202, 8203, 8204, 8205, 8206 W R A, O USA T: 800 32 7950 440 998 2788 F: 440 992 2925... 023208 2 INSTRUCTIONS FOR 3/4,, -/4 DIAMETER TAPS FIGURE A B C D E F G HOT TAP SPINDLE HOT
More informationFlareless Bite Type Fittings
Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU
More informationInsert Fittings. KF Series
Insert Fittings Series A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials ube grip (resin sleeve) ube is
More informationCompression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More informationBSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
More informationJOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
More information15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
More informationPipe Swivels. The Fitting Authority
Pipe Swivels The Fitting Authority 0507 007 007 3507 Straights 45 Elbows 307 307 507 5507 07 NPT / NPSM Swivel 90 Elbows 5607 NPT / NPSM Swivel Long Drop 07 077T NPSM Swivel / NPSM Swivel / NPSM Swivel
More informationSADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
More information4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
More informationEconomizer Regulator Filter Upgrade
Overview Chart LNG has released a new and improved economizer regulator, and filtering system. The new economizer filter system is designed to enhance reliability, and offer lower operating costs. In 2012
More information1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationStandard Releasing Spear. Manual B215
Standard Releasing Spear Manual B215 NOTES Contents Standard Releasing Spear Overview... 2 Use... 2 Construction... 2 Illustrations Spear Assembly with Flush-Type Mandrel... 3 Spear Assembly with Shoulder-Type
More informationbrass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
More informationUNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
More informationAiretool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
More informationTech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
More informationQuick Coupling Products
Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION
More informationPNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
More information06/16 BBK. The economizer. factory when the A. Page 1 of 8. Procedure. using LNG. Safety-0001.
Overview The following Technical Service Bulletin gives the servicing technician detailed instructions to aid with replacing an economizer regulator on a Chart LNG vehicle fuel tank. Economizer Regulator
More informationPVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG EFFECTIVE
PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 4-15-13 SUPERDUCT PVC DUCT PIPE Part No. Size O.D. Wall Std. Length List Price Per Ft. List Price Per Ft. Extruded 10 ft. 20 ft. 1033-PP-02
More informationM10 / M12 M12 / M16 M16 / M20 M20 M20 M25 M32 M40 M50 / M / 13,5 13,
Multitite F grey: Light and flexible. Type F is, among others, being used in the buildingindustry, connection of control panels and protection against rodents. F is applied for quick and easy mounting
More informationInch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
More informationPEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
More informationQuality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
More informationInsertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
More information10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More information10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationViega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
More informationQUANTITY BRASS FITTING SIZE PART #
BRSS FITTINGS P/N 19510 Manufactured from virgin high density brass alloy Pressure 1,200 psi operating Proof pressure up to 15,000 psi for 1/8" and 1/4" pipe, 5,000 psi on larger sizes Temperature: -65
More informationApprox. 4 s, measured in oil, with a probe Ø of 10 mm made of stainless steel. Influential effect of the ambient temperature
sales@jumo.co.uk info.us@jumo.net Page/6 Dial Thermometer Type 608225 Special features Class Display ranges from -40 C to +600 C Temperature indicator as built-in or add-on device Stainless steel case
More informationWITH ROLLED STOP COUPLING REDUCER C X C C
Copperfit Industries Inc. 1280 E. 9th St. Pomona, CA 91766 Tel: (909) 622-6100 (866) 200-1888 Fax: (909) 622-5566 WWW.COPPERFIT.COM COPPER PRESSURE FITTINGS Effective Date: Jan 2018 Version: 2C201801 Spread
More informationDrop-Down Launcher Basic Kit -1 Stock No. Description Function List Price LNCH " Drop-Down, I-L Motor Launcher
Drop-Down Launcher Basic Kit -1 LNCH-15-02 1.5" Drop-Down, I-L Motor Launcher Complete w/ Slide and Base Rail, TWO HOSE CLAMPS for NOS & GOX flex lines, AND adapter brackets to mount to 1.0" rail 250.00
More information1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4
For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.
More informationprecision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com
More informationHarrison Machine & Plastic Corporation HARRISON SUPERDUCT FUME EXHAUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CATALOG
Harrison Machine & Plastic Corporation HRRISON SUPERDUCT FUME EXHUST SYSTEMS PVC DUCT FITTINGS & PVC DUCT PIPE LIST PRICE CTLOG EFFECTIVE 01-01-2018 1 HRRISON SUPERDUCT PVC DUCT PIPE Part No. Size O.D.
More information4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized.
Swivel Joints Table of Contents Advantages of using Eaton Swivel Joints 2 Selection Criteria and Product Safety Considerations 3 FS6500 4 Features and Benefits 4 Performance Testing 4 Repair Kit 10 BD5500
More informationE-Z Clip System End Connections & O-Rings
PPLICION E-Z Clip System End Connections & O-Rings ow to Identify O-Ring Pilot hread Sizes his connection is common to air conditioning systems, both in vehicle and commercial applications. Both the male
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationHERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
More informationSTEEL NIPPLES BLACK BRASS & GALVANIZED FITTINGSSCH 40
1/8" DIMETER STEEL NIPPLES BLCK BRSS & GLVNIZED SCH 40 Length Box/Case pprox. Galv 56-001 1.89 X Close (3/4") 5/600 0.02 57-001 1.34 56-002 1.95 x 1-1/2" 5/600 0.03 57-002 1.51 56-003 2.19 x 2" 5/600 0.04
More informationAssembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
More informationPRO PLUMBERS SUMMER SPECIALS Prices good through September 30, 2018
Order On Account or With Credit Cards OVER 25,000 ITEMS IN STOCK PRO PLUMBERS SUMMER SPECIALS Prices good through September 30, 2018 UPS SHIPPING CHARGES ARE FREE*...On All Orders That Are Over $143 net
More informationPNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
More informationM-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More information4700A. T nut. EPDM gasket. tubing. 4700tA
UNDERGROUND WATER SERVICE FITTINGS A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS 4-07 Undergrond Water Service Fittings & Coplings n Flare Bll nose end A. Remove the flare nt from the valve or fitting
More information45 Flare F L A R E. SPECIAL SIZES Other sizes not specified are available upon request.
45 Flare TTON Flare Fittings are manufactured especially with hazardous liquids and gasses in mind. They are available in sizes ranging from 1/8" to 3/4", and are manufactured from high quality DZR grade
More informationRadiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
More informationOperating Instructions Wall saw WSE1217 USA
Operating Instructions Index 000 Original operating instructions 10992859 en / 25.04.2012 Congratulations! With a Hydrostress unit from TYROLIT, you have chosen a tried and tested piece of equipment which
More informationPSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD
PSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD ALL SPLIT VERSIONS OF OUR STANDARD COMPAKT SEALS ARE FOLDABLE WWW.PSI-PRODUCTS.COM
More informationParts Manual Fittings - Brass
Parts Manual Fittings - Brass Page 1 of 12 Item No. CCP Part# Mfg. Part# CONA Material# Description 1.01 135118 LF41S-8 150010308 NUT,MILLED,SHORT TYPE,1/2 TUBE, LL 1.02 542780 308317 150004237 NUT,SHORT,1/4
More informationCITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
More informationMULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES
MULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES Industry puts Maurey sheaves on more drives every year simply because
More informationAdjustable, Dirt Tolerant Venturi Vacuum Pumps
Adjustable, Dirt Tolerant Venturi Vacuum Pumps VDF Series VDF-37-ST8B picks and places refrac bricks used to line refractory ovens. Standard Pump: The VDF Series is a unique Vaccon innovation that places
More informationHardwall Steelflex Ultra by Irpco w/ Chrome Brass
Hardwall Steelflex Ultra by Irpco w/ Chrome Brass PERMS PERM X SWIVEL PERMS PERM X SWIVEL PERMS 5/8" Part # Price 5/8" Part # Price 3/4" Part # Price 3/4" Part # Price 1" Part # Price 1" Part # Price 8
More informationCPVC Hot and Cold Water System
CPVC Hot and Cold Water System CANADA CPVC-C0313 MARCH 2013 SUPERSEDES CPVC-C1112R NOV. 2012 TABLE OF CONTENTS CPVC PIPE PAGE CATEGORY FlowGuard Gold CPVC Copper Tube Size Pipe 3 C-23 FITTINGS FlowGuard
More informationVSG, VSL, VSKH and VSKV Two-line Metering Devices
VSG-KR These high quality, galvanized steel metering devices are designed for high-pressure (up to 400 bar) two-line systems. They can also be used in low to medium-pressure systems. They are available
More informationUltrasonic Flow Meter Brochure
Ultrasonic Meter Brochure Rev. 2011/06/10 www.sitelab.us.com Descriptions SL1168 Ultrasonic meter uses the latest digital technology and low-voltage broadband pulse transmission. The instrument is tolerant
More informationBALL VALVE ACCESSORIES
000 Retrofit Kits Easily converts any system over to all 000 style valves for consistent valve type and uniform maintenance. Special extended socket style End onnectors () allow retrofit replacement of
More informationUniversal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationPipe Fittings and Port Adapters
Pipe Fittings and Port Adapters Pipe Fittings and Port Adapters F The Fitting Authority Pipe Fittings and Adapters - Order Today, SHIP TODAY at www.partsgopher.com Pipe Fittings and Port Adapters 4300
More informationRev/02/ Flared T (SAE J514) ube Fittings
Rev/02/2013 37 lared Tube ittings (SA J514) Introduction PANAM has been in the field of manufacturing precision Tube ittings and Instrumentation valves since the last Two decades. With a team of dedicated
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationViega Pexcel Water System
Viega Pexcel Water System PAGE 57-1 ViegaPEX Ultra ViegaPEX Ultra is manufactured to ASTM F876/F877 standards and listed to ANSI/ NSF Standards 14 and 61. It is chlorine resistance rated for both traditional
More informationPipe Fittings. ADVANTAGES Very easy to assemble. No special tools or extra parts are necessary. May be assembled/ disassembled numerous times.
Fittings TTON Fittings are manufactured with female R Series and male BST threads in accordance with AS1772. These robust fittings are available in a comprehensive range of sizes ranging from 1/8" to 1".
More informationDescription: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447
Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake
More informationCONNECTIONS MADE SIMPLE
ONNTIONS M SIMPL NOW VILL IN PRSS! ompatible with popular press tools Guaranteed for life PRO-ONNT PRSS Full Port Forged rass all Valves w/ djustable Packing Gland STNR RSS L-FR RSS ertified to ertified
More informationVol. 33. Copyright 2007 by C&D Valve Manufacturing Company
Vol. 33 Copyright 200 by C&D Valve Manufacturing Company INDUSTRY COMPLIANCE: Access fittings manufactured and sold by C&D Valve meet ARI Standard 20-9 GUARANTEE: C&D Valve Mfg. Co. products are unconditionally
More informationDial Thermometer. Particularities. Brief description. Technical data. Page 1/6. Data Sheet
Dial Thermometer Data Sheet 608202 Page 1/6 - discontinued - Particularities Temperature indicator for panel mounting Class 2 IP53 front protection Housing sizes: 52 mm and 60 mm dia. Bezel: 48x48 mm,
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More information60 series, 2/2 or 3/2 Ball valve
>> Port size: Rp/..., /... >> Ideally suited for most general purpose applications >> Easy installation, simple operation and maintenance free >> -way ball valves with actuator interface conforming to
More informationContact Dial Thermometers
Data sheet 6852 Page 1/11 Contact Dial Thermometers FL 21 Special features Class 1.5 Display range -4 C to +6 C Temperature controller with actual value display as built-in or add-on device in a stainless
More informationISO Components 1.57 (40) (26.2) (3.0) 0.12
ISO omponents KEY HIGH VUUM PRODUTS, IN., is a major manufacturer of ISO flanges and components. These flanges and components are a comprehensive family of high vacuum building block components. ll "KEY
More informationJOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories
More informationKing Crimp System. dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACT King Crimp System dixonvalve.com Customer Service: 877.963.4966 Table of Contents Crimp style couplings...
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationSOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
More informationDuctile Iron Flanged Fittings DIA. OF BOLT CIRCLE FLANGE THICKNESS 2" " "
-27 NOM. PIPE FLNGE O.D. DI. OF OLT CIRCLE JOINT DIMENSIONs (in inches) FLNGE THICKNESS OLT HOLE DIMETER NO. OF OLTS OLT DI. & LENGTH O.D..C. T 2" 6.00 4.75.62.750 4 5 8 2 1 4 3" 7.50 6.00.75.750 4 5 8
More informationCode Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
More informationQuick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
More informationMission Critical Fiber Optic Solutions
Mission Critical Fiber Optic Solutions Military Fiber Optics Timbercon manufactures fiber optic products that are used in a variety of military applications requiring rigorous testing and certification
More informationThreaded thermocouple Miniature design Model TC10-D
Temperature Threaded thermocouple Miniature design Model TC10-D WIKA data sheet TE 65.04 for further approvals see page 2 Applications Machine building, plant and vessel construction Propulsion technology
More informationSTEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
More information