CONTA-CONNECT SHIELD-CONNECTION CLIPS
|
|
- Anissa Richard
- 5 years ago
- Views:
Transcription
1 CONTACONNECT SHIELDCONNECTION CLIPS
2 CONTACONNECT Shieldconnection clip SAB SSAB SSAB In the field of industrial process engineering, a high degree of interference immunity is required of electrical equipment. In the fields of measurement, regulation and control engineering, this is a significant contributor to the viability of industrial systems. When constructing lowinterference systems, both the cable shielding and the associated shielded ground are of great significance. The point where the cable shielding connects to the housing ground is a critical point. The connection should be lowohm, and should also feature minimal inductive resistance. You should be certain that this connection can be established in a practical, simple and quick manner. CONTACLIP s SAB/SSAB clip accomplishes all this with the help of its outstanding feature set. SAB SAB.../D SAB.../F SAB.../MF/35 2
3 Shieldconnection clip SAB SSAB Overview of the variants Busbar mounting with the SSAB The SSAB can be mounted on a busbar. After wiring the terminal block, the shieldconnection clip is mounted by simply swiveling in and tightening the knurled thumb screw. This makes the SSAB screwshieldconnection clip very convenient to wire. Depending on the length of the terminal blocks, two or more SH/SAB busbar supports are used. These mechanically connect the front busbar with the DIN rail (support). SH busbar supports are used where a shieldconnection system must be mounted directly onto a panel rather than a DIN rail. The 0 x 3 busbars can be easily and quickly snapped on to these supports. In both cases, the contact with the earth or ground potential can be established with a ZB clamping yoke. Busbar mounting with the SAB The SAB can be mounted on a busbar. After connecting the wiring, the shieldconnection clip is mounted by simply swiveling in the SAB clip onto the busbar. The force on the cable comes from a springpressure piece. This regulated pressure ensures a constant optimal contact. This makes the SAB shieldconnection clip very convenient to wire. Depending on the length of the terminal blocks, two or more SH/SAB busbar supports are used. These mechanically connect the front busbar with the DIN rail (support). SH busbar supports are used so that the shieldconnection clip can be positioned freely on the mounting plate or in the switchgear cabinet. The 0 x 3 busbars can be easily and quickly snapped on to these supports. In both cases, the contact with the earth or ground potential can be established with a ZB clamping yoke. Direct mounting SAB /D SAB /D offers the possibility of direct installation. The force on the cable comes from a springpressure piece. This regulated pressure ensures a constant optimal contact. The SAB /D can be installed with an M 4 screw (included in delivery) directly to the mounting plate. The SAB /D M5 shieldconnection clip comes with a special feature; it is equipped with a selfcutting M5 SW3 metal screw. This means that less time is required to mount the clip on the mounting plate, since you only need to drill one 4.2mm hole through the plate. The hole threads will then be cut into the plate by the screw. DIN rail installation SAB.../F The SAB /F can be mounted on a DIN rail. The force on the cable comes from a springpressure piece. This regulated pressure ensures a constant optimal contact. The SAB /F can be mounted directly to the TS 35 rail using a mounting screw with a clamping foot. DIN rail installation SAB.../MF/35 The SAB /MF/35 can be installed on a DIN rail. The SAB /MF/35 is snapped on directly via the internalspring MF/35 foot without the need for tools. The force on the cable comes from a springpressure piece. This regulated pressure ensures a constant optimal contact with the DIN rail. 3
4 Shieldconnection clip SSAB system Screwon clip for simple retrofitting Knurled thumb screw, so no tools required Simple handling The SSAB screwshield connection clip is suitable for standard cable shielding. It enables EMCcompliant wiring with its large surface area. It also has lowimpedance and lowohm contact junctions. It is ideal for wires with diameters ranging from 2 to 35 mm. The contacts can be established without the need for any special tool. Simple mounting large shielding surface secure contact SSAB 5 SSAB CONTACONNECT SSAB 4 Shieldconnection clip Shieldconnection clip Shieldconnection clip Connection type Dimensions (L x W x H), mm Technical data Connection in compliance with standard Material Connection data Min. torque, Nm Max. torque, Nm Cable diameter, mm Screw Drill hole diameter, mm Accessories SH overlay block Busbar support Busbar Ssch/MS Busbar Ssch/CU End stop ES ZB without cap ZB cap GNYE Mounting screw BS, for the SH BG Mounting screw BS, for 2 x SH BG 9.5 x 9 x 46. SSAB SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU x 2 x 4.7 SSAB SH BG 23.2 BG Ssch 0x3 MS 22.0 Ssch 0x3 CU x 7 x 59.3 SSAB SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU Additional accessories For mounting on busbar b d c a e An SSAB application with the SH SSAB 5 SSAB SSAB 4 SSAB SSAB 2 SSAB 35 a 6.5 mm 6.5 mm 6.5 mm 6.5 mm 6.5 mm 6.5 mm b 9.5 mm 9.5 mm 9.5 mm 9.5 mm.0 mm.0 mm c 46. mm 4.7 mm 59.3 mm 75,0 mm 92.7 mm 06.5 mm d 9.0 mm 2,0 mm 7,0 mm 24.0 mm 32.0 mm 40.0 mm e 6.0 mm 9.0 mm 4.0 mm 2.0 mm 2.0 mm 36.0 mm An SSAB application with 4
5 SSAB SSAB 2 SSAB 35 Shieldconnection clip Shieldconnection clip Shieldconnection clip 9.5 x 24 x 75 SSAB x 32 x 92.7 SSAB x 40 x 06.5 SSAB SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU
6 Shieldconnection clip SAB SAB...D SAB CONTACONNECT SAB 3.5 SAB Quick snapon or mounting of the shieldconnection clip Different cable crosssections can be accommodated by the elastic nature of the spring Simple handling The SAB shield connection clip is suitable for standard cable shielding. It enables EMCcompliant wiring with its large surface area. It also has lowimpedance and lowohm contact junctions. It is ideal for wires with diameters ranging from 3 to mm. The contacts can be established without the need for any special tool. Simple mounting large shielding surface secure contact Shieldconnection clip Shieldconnection clip Shieldconnection clip Connection type Dimensions (L x W x H), mm High base, with TS 35 x 7.5 mm /colour /colour SAB with selftapping screw Technical data Connection in compliance with standard Material Connection data Min. torque, Nm Max. torque, Nm Cable diameter, mm Screw Drill hole diameter, mm Accessories SH overlay block Busbar support Busbar Ssch/MS Busbar Ssch/CU end stop ES ZB without cap ZB cap GNYE Mounting screw BS, for the SH BG mounting screw BS, for 2 x SH BG SAB x 3 x SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU SAB x 9.5 x SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU SAB x 24.5 x SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU Additional accessories For mounting on busbar Dimensions An SAB application with the SH SAB SAB 3.5 SAB SAB /D SAB 3,5/D SAB /D L.5 mm 2.0 mm 27.0 mm.5 mm 2.0 mm 27.0 mm B 3.0 mm 9.5 mm 24.5 mm 30.0 mm 9.5 mm 24.5 mm H 26.5 mm 32.5 mm 40.5 mm 26.5 mm 32.5 mm 40.5 mm Foot / screw M4 / M5 M4 M4 An SAB application with 6
7 SAB /D SAB 3.5/D SAB /D Shieldconnection clip Shieldconnection clip Shieldconnection clip.5 x 3 x x 9.5 x x 24.5 x 40.5 SAB /D SAB /D/M SAB 3,5/D SAB /D M4 / M5 4.2 SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU M4 4.2 SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU M4 4.2 SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU Direct mounting SAB.../D 7
8 Shieldconnection clip SAB SAB /F CONTACONNECT SAB 3.5/F SAB /F Quick snapon or mounting of the shieldconnection clip Different cable crosssections can be accommodated by the elastic nature of the spring Simple handling The SAB shield connection clip is suitable for standard cable shielding. It enables EMCcompliant wiring with its large surface area. It also has lowimpedance and lowohm contact junctions. It is ideal for wires with diameters ranging from 3 to mm. The contacts can be established without the need for any special tool. Shieldconnection clip Shieldconnection clip Shieldconnection clip Connection type Dimensions (L x W x H), mm High base, with TS 35 x 7.5 mm /colour /colour Technical data Connection in compliance with standard Material Connection data Min. torque, Nm Max. torque, Nm Cable diameter, mm Screw Drill hole diameter, mm Accessories SH overlay block Busbar support Busbar Ssch/MS Busbar Ssch/CU end stop ES ZB without cap ZB cap GNYE mounting screw BS, for the SH BG mounting screw BS, for 2 x SH BG SAB /F x 3 x SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU SAB 3,5/F x 9.5 x SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU SAB /F x 24.5 x SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU Additional accessories Mounting on DIN rail Dimensions SAB.../F SAB /F SAB 3,5/F SAB /F L.5 mm 2.0 mm 27.0 mm B 3.0 mm 9.5 mm 24.5 mm H 26.5 mm 32.5 mm 40.5 mm Foot / screw 2.0 mm 2.0 mm 2.0 mm
9 SAB /MF/35 SAB 3.5/MF/35 SAB /MF/35 MF/35 Shieldconnection clip Shieldconnection clip Shieldconnection clip Mounting foot TS 35.5 x 3 x SAB /MF/ x 9.5 x SAB 3,5/MF/ x 24.5 x SAB /MF/ MF/ x 4.2 x SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU ,5 SH BG Ssch 0x3 MS 22.0 Ssch 0x3 CU M4 Mounting on DIN rail Dimensions SAB /MF/35 SAB 3,5/MF/35 SAB /MF/35 L.5 mm 2.0 mm 27.0 mm B 3.0 mm 9.5 mm 24.5 mm H 26.5 mm 32.5 mm 40.5 mm Foot height 7.3 mm 7.3 mm 7.3 mm SAB/.../MF/35 9
10 Clamping yoke ZB/Accessories Material: steel Busbar support Housing made from polyamide 6.6 UL 94V2 /... 0x3 SH CONTACONNECT SH SAB Clamping yoke 4 mm 2 for busbar 0x3 Busbar support Busbar support Connection type Dimensions (L x W x H), mm 5.5 x 5.3 x.7 mm 24 x 24 x 23.7 x 9.5 x 9 /color /color /color /color Colors available Technical data Material of clamping yoke Material of cap/holder Material of busbar CU/MS Ratings Rated conductor crosssection, mm 2 Screw Load current CU/MS Stripping length mm Accessories Cap GNYE Cap BU Cap black Fastening screw BS /K BU /K BK K 4 GNYE 24. K 4 BU 24.5 K 4 BK 24.4 PA 6.6 V M 3 x 6 SH BG 23.2 PA 6.6 V PA 6.6 V2 0 Busbar mounting with the SAB Installation example 0
11 ES 35/K/ST Ssch 0 x 3 Busbar support Busbar support 3x0 x 9.5 x x 0 x 3 Ssch 0x3 MS 22.0 Ssch 0x3 CU PA 6.6 V2 Copper / brass 40 A /00A
12 EN 0 0 All rights reserved. CONTACLIP Verbindungstechnik GmbH OttoHahnStr. 7 Fon +49 (0) D336 Hövelhof Fax +49 (0) info@contaclip.de CONTACLIP, Inc. 400 Apgar Drive Suite D Somerset, NJ 073 Phone Fax info@contaclipinc.com
Content. Shield connection terminals. Overview G.2 - G.3. For 10 x 3 mm busbars Clamping yoke G.4 - G.5 Busbarholders G.6 - G.
Content Overview.2 -.3 For 10 x 3 mm busbars Clamping yoke.4 -.5 Busbarholders.6 -.7 Mounting directly on metal plate Clamping yoke.8 Busbar holder, Spacer.9 Mounting on TS 35 FM 4-foot / Clamping yoke
More information10. EMC accessories. Chapter. EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips Cable clips 10.
10. EMC accessories Chapter EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips 10.11 Cable clips 10.13 More Informations about cabinet wiring with LÜTZE LSC AirSTREAM:
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationWE TAKE CARE OF EVERYTHING IN THE ELECTRICAL CABINET
WE TAKE CARE OF EVERYTHING IN THE ELECTRICAL CABINET Users of connection systems have come to rely on CONTA-CLIP s broad portfolio of products and for good reason. Our products are developed in close consultation
More informationCABLE ENTRY SYSTEM KDSClick
CABLE ENTRY SYSTEM KDSClick PRODUCT INFORMATION Cable entry system KDSClick CONTA-CONNECT TURNING CABLES INSIDE OUT! a revolutionary cable entry system! Fast. Safe. Very simple. Our KDSClick cable entry
More informationShield connection terminals KLBÜ. Multipin terminal strips. Components for installation. Busbars / mounting rails. Overview F.2 - F.
Other conductor connectors Shield connection terminals KLBÜ Overview.2 -.3 or 10 x 3 mm busbars Clamping yoke.4 -.5 Busbarholders.6 -.7 Mounting directly on metal plate Clamping yoke.8 Busbar holder, Spacer.9
More informationPowerDRIVE-Box GEL 6505 Interface for controlling up to 5 positioning drives
PowerDRIVE-Box GEL 6505 Interface for controlling up to 5 positioning drives Technical information Version 208-05 GEL 6505A: Box for top hat rail mounting, IP 20 variant General The PowerDRIVE-Box GEL
More informationM12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
More informationPHOENIX CONTACT - 11/2007. This data sheet is only valid in association with the IB IL SYS PRO UM E user manual.
INTERBUS Inline Bus Coupler; Remote Bus Connections Via D-SUB Connectors REMOTE IN BA UL RD RC DSUB LD AUTOMATIONWORX Data Sheet 6362_en_03 PHOENIX CONTACT - 11/2007 REMOTE OUT Description The bus coupler
More informationfine-stranded solid V A mm mm V/8 kv/3 32 No AWG 600 V 30/35 No AWG 600 V 40 6 mm 9 mm aüigotucf+qkw h
Terminal blocks with screw connection for junction boxes, type WKI selos BIT EN 60 947-7-1/DIN VDE 0611 T1 UL ratings CSA ratings Width Approvals Feed-through block Feed-through block field-/factory wiring
More informationTT-2-PE-M-24DC. Extract from the online catalog. Order No.:
Extract from the online catalog TT-2-PE-M-24DC Order No.: 2920641 Modular terminal block with two-stage surge protection for one operated floating double conductor, disconnect knife on both signal paths,
More informationPHOENIX CONTACT - 01/2008
Ex Basic Terminal Blocks for Intrinsically Safe Signals With Knife Disconnection and Test Connections INTERFACE Data Sheet 102957_00_en PHOENIX CONTACT - 01/2008 1 Description PI-EX-TB and PI-EX-TB/T Ex
More informationOne Phase Power Distribution Block
Quick mounting and wiring Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) Accessories increase the number of outputs with only one input (applies only to and ) No caps
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationSR60 Busbar System 2/1 2/2. General Data. 2/3 Busbar routing. 2/7 Mounting components. 2/13 Accessories
/ SR0 Busbar System General Data / Busbar routing / Mounting components / Accessories / SR0 Busbar System General Data Overview The SR0 busbar system is a modular system for busbars, for installation in
More informationPHOENIX CONTACT Features
Electronic monitoring relay for temperature monitoring Data sheet 107385_en_00 1 Description PHOENIX CONTACT - 2016-05-10 Features Safety and system availability requirements are constantly on the increase
More informationTT-2-PE- 24DC. Extract from the online catalog. Order No.:
Extract from the online catalog TT-2-PE- 24DC Order No.: 2838186 Modular terminal block with three-stage surge protection for a floating double conductor, separate ground connection, nominal voltage: 24
More informationService poles for industrial applications
Service poles for industrial applications Ready to go. The ISS basic profile Our industry service poles bundle power, data and compressed air in a compact and robust manner. This means relocations, for
More informationUK 5-MTK-P/P. Extract from the online catalog. Order No.:
Extract from the online catalog UK 5-MTK-P/P Order No.: 3004032 Disconnect and test disconnect terminal block, Connection type: Screw connection, Cross section: 0.2 mm² - 6 mm², AWG: 24-10, Nominal current:
More informationConnect - Contact - Control. Connectors according to UIC VE EP Series. F 121.en
Connect - Contact - Control Connectors according to UIC 541-5 VE 123 F 121.en 2 Connector to UIC standard 541-5 VE, The connector is designed in accordance with the specifications of the international
More informationTT-SLKK5/ 24DC. Extract from the online catalog. Order No.:
Extract from the online catalog TT-SLKK5/ 24DC Order No.: 2794903 The illustration shows version TT-SLKK5/ 12 DC Modular terminal block with varistor as surge voltage protection between clamping connector
More informationTT-UK5/ 24DC. Extract from the online catalog. Order No.:
Extract from the online catalog TT-UK5/ 24DC Order No.: 2794699 Modular terminal block with surge voltage fine protection between clamping connector and DIN rail, nominal voltage: 24 V DC, for mounting
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More informationUTME 6. Extract from the online catalog. Order No.:
Extract from the online catalog UTME 6 Order No.: 3047400 Test disconnect terminal block, Connection method: Screw connection, Cross section: 0.2 mm² - 10 mm², AWG: 24-8, Width: 8.2 mm, Color: gray, Mounting
More informationUK 5 N BU. Extract from the online catalog. Order No.:
Extract from the online catalog UK 5 N BU Order No.: 3004388 Feed-through modular terminal block, Type of connection: Screw connection, Cross section: 0.2 mm² - 6 mm², AWG 24-10, Width: 6.2 mm, Color:
More informationUK-SI. Extract from the online catalog. Order No.:
Extract from the online catalog UK-SI Order No.: 3118012 Fuse terminal block for cartridge fuse inserts 5 x 20 and 5 x 25, cross section: 0.2 -, width: 8.2 mm, color: black Commercial data EAN 4017918092856
More informationInsulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals
Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals Technical Data Type: KS 4401 KS 4402 KS 4403 KS 4461 KS 4404 KS 440 KS 4406 Article number * ) : 00636 00637 0063987 00614
More informationConductor and Cable Marking Description and Handling
Conductor and Cable Marking Description and Handling 566 Wire marking The following markers are available: Markers for plotter marking. Markers on roll for thermal transfer printing. Remove the printed
More informationAltech s DIN Enclosures by
Altech s DIN Enclosures Since 98 Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
More informationME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description
Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with
More informationDIK 1,5. Extract from the online catalog. Order No.:
Extract from the online catalog DIK 1,5 Order No.: 2715966 Three-level initiator terminal block, cross section: 0.2-2.5 mm², AWG: 30-14, width: 6.2 mm, color: gray Commercial data EAN 4017918061715 Pack
More informationDOK 1,5-2D. Extract from the online catalog. Order No.:
Extract from the online catalog DOK 1,5-2D Order No.: 2717139 Sensor/actuator terminal block, Cross section: 0.2 mm² - 4 mm², AWG: 24-12, Connection type: Screw connection, Width: 6.2 mm, Color: gray,
More informationUK 10-PLUS. Extract from the online catalog. Order No.:
Extract from the online catalog UK 10-PLUS Order No.: 3001381 1-level terminal block with double connection on one side, cross section: 0.5-10 mm², AWG: 24-6, width: 10.2 mm, color: gray Commercial data
More informationModular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
More informationGeneral catalogue 2018/2019 EMC-SOLUTIONS FASTENING SYSTEMS
General catalogue 2018/2019 EMC-SOLUTIONS FASTENING SYSTEMS HEBOTEC stands for special properties, such as: innovative power, ingenuity, diligence, business thinking and reliability. All that experience
More informationDescription of parts Panel mounting Insert mounting without/with Carrier element Plastic housings
- Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting
More informationConnector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
More informationDIK 1,5-LA 24RD/U-O. Extract from the online catalog. Order No.:
Extract from the online catalog DIK 1,5-LA 24RD/U-O Order No.: 2715995 Sensor/actuator terminal block, Cross section: 0.2 mm² - 4 mm², AWG: 24-12, Connection type: Screw connection, Width: 6.2 mm, Color:
More informationDetails of the Han-Terminal block connector Han D AV Han D AV Distributor Han E AV Han ES AV
Contents -Terminal Block Connectors Page Details of the -Terminal block connector........................ 08.02 D................................................... 08.10 D Distributor...........................................
More informationManual Clamps for Automotive Prototype Production
Manual Clamp interchangeable with 82M-6 This newest version provides more clamp arm variations and in addition two hold open devices. Opening angle can be reduced now. Page 15.2 New products 15.0 Notes
More informationKDS cable entries KES cable entries SAB SSAB SABK shielding solutions
CABLE MANAGEMENT SYSTEMS KDS cable entries KES cable entries SAB SSAB SABK shielding solutions Catalogue 08 Contents Our company 3 The advantages online 4 Globally available for you 5 Catalogues 6 Product
More informationPANEL ACCESSORIES. Crimping Tools and Ferrules. Wire Cutting and Stripping Tools. Shield Connection System
Panel Accessories PANEL ACCESSORIES Get the job done! In addition to interconnect and automation products, WAGO offers a complete range of accessories designed to make panel building fast and easy. From
More informationBetter all-round. DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications. PoE+ 10 GBE. coded.
Better all-round. X coded D coded 10 GBE PoE+ DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications STX M12x1 IP67 connector series With the STX M12x1 IP67 connector
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationUK 6 N. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6 N Order No.: 3004524 Feed-through modular terminal block, Type of connection: Screw connection, Cross section: 0.2 mm² - 10 mm², AWG 24-8, Width: 8.2 mm, Color: gray,
More informationODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationZB4BW963 blue flush illuminated pushbutton head Ø22 spring return for integral LED
Characteristics blue flush illuminated pushbutton head Ø22 spring return for integral LED Main Range of product Product or component type Device short name Product compatibility Bezel material Head type
More informationUK 5-HESILA 250. Extract from the online catalog. Order No.:
Extract from the online catalog UK 5-HESILA 250 Order No.: 3004142 The illustration shows version UK 5-HESI Fuse terminal block for cartridge fuse insert, cross section: 0.2-4 mm², AWG: 26-10, width: 8.2
More informationInsulated Enclosure KU 4090 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4090 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 105 mm Uo to 48 plus-minus-terminal screws with self raising terminal washers. Part insertion
More informationInsulated Enclosure KU 4087, KU 4088 KU 4089 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4087, KU 4088 KU 4089 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 17,5 / 35 / 70 mm 8 / 16 / 32 plus-minus-terminal screws with self raising
More informationSwitch cabinet housings. Distribution housings. Appropriate housings for each application. Our experience. Your safety.
Switch cabinet housings Distribution housings Appropriate housings for each application Our experience. Your safety. Overview of the housing ranges Mounting rail bus system In-Rail Bus...6 Switch cabinet
More informationNV disconnectors with fuses
NV disconnectors with fuses Horizontal fuse-switch disconnector type HVL size 00,, 2, and 4a Description Horizontal fuse-switch disconnector type HVL are designed to be used in most demanding fields of
More informationUKKB 10. Extract from the online catalog. Order No.:
Extract from the online catalog UKKB 10 Order No.: 2772077 Feed-through modular terminal block, Cross section: - 16 mm², AWG: 20-6, Connection type: Screw connection, Width: 10.2 mm, Color: gray, Mounting
More informationNCLOSURES & TTERMINATIONS
V7-W DINN MOUNTTABLE ABLE SCREW TYPE TERMINALS Taking control of your wiring requirements EENCLOSURES NCLOSURES & TTERMINATIONS ERMINATIONS - 66 NHP 1300NHP nhp.com.au 000 NHP NHP nhp-nz.com Refer catalogue
More informationUDK 4-DUR. Extract from the online catalog. Order No.:
Extract from the online catalog UDK 4-DUR Order No.: 2775207 The illustration shows version UDK 4-DUR 249 Feed-through modular terminal block, Connection type: Screw connection, Cross section: 0.2 mm²
More informationData sheet C6 A modul 90 jack
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: module, 90 cable feed solid,
More informationUK 6,3-HESI. Extract from the online catalog. Order No.:
Extract from the online catalog UK 6,3-HESI Order No.: 3004171 Fuse terminal block for cartridge fuse insert, cross section: 0.5-16 mm², AWG: 26-8, width: 10.2 mm, color: black Commercial data EAN 4017918090685
More informationUK 10-DREHSI (6,3X32)
Extract from the online catalog UK 10-DREHSI (6,3X32) Order No.: 3005507 The illustration shows version UK 10-DREHSI (5x20) Fuse terminal block for cartridge fuse insert, cross section: 0.5-16 mm², AWG:
More informationZB4BW353 orange flush illuminated pushbutton head Ø22 spring return for integral LED
Characteristics orange flush illuminated pushbutton head Ø22 spring return for integral LED Main Range of product Product or component type Device short name Product compatibility Bezel material Head type
More informationMultitronic. Technical data
Multitronic EMC Aluminium enclosure system for MCR technology Integrated guide grooves for PCB s External mounting slots with spring nuts Technical data Material: DIN EN 573 EN AW-AlMgSi Ingress protection:
More informationHan-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
More informationZB4BA73134 green flush/red projecting/green flush tripleheaded pushbutton Ø22 with marking
Characteristics green flush/red projecting/green flush tripleheaded pushbutton Ø22 with marking Main Range of product Product or component type Device short name Bezel material Mounting diameter Sale per
More informationTransparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
More informationItem No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
More informationSwitches 6/1. 6/4 Introduction. 6/5 5TE8 control switches. 6/7 5TE4 8 pushbuttons. 6/9 5TE8 On/Off switches. 6/11 5TE1 switch disconnectors
6/4 Introduction 6/5 5TE8 control switches 6/7 5TE4 8 pushbuttons 6/9 5TE8 On/Off switches 4 6/11 5TE1 switch disconnectors 6 6/1 Switch to manual? Wherever electrical systems need to be switched on or
More informationGround terminal block with screw connection, cross section: mm², AWG: 24-10, width: 6.2 mm, color: Green-yellow
Extract from the online catalog USLKG 5 Order No.: 0441504 Ground terminal block with screw connection, cross section: 0.2-4 mm², AWG: 24-10, width: 6.2 mm, color: Green-yellow Commercial data EAN 4017918002190
More informationFlexible connectors made out of copper- and aluminium foils
Fleible connectors made out of copper- and aluminium foils We offer a wide range of standardized laminated connectors as well as multifarious designs according to your drawings or wishes. All articles
More informationCable entry systems for potentially explosive atmospheres
Cable entry systems for potentially explosive atmospheres Directive 94/9/EC (ATEX) ATEX stands for ATmosphère Explosible and is the short name for the European Directive 94/9/EC, regulating the market
More informationAO561 Analog Output Module
Ordering Data DATA SHEET AO561 Analog Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1201 AO561, analog output module, 2 AO, U/I 1TNE 968 901 R3102 Terminal
More informationDI572 Digital Input Module
Ordering Data DATA SHEET DI572 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 230 500 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE 968
More informationMBKKB 2,5-PV. Extract from the online catalog. Order No.:
Extract from the online catalog MBKKB 2,5-PV Order No.: 2800583 Mini double-level terminal block, with equipotential bonding between the levels, cross section: 0.2-2.5 mm², width: 5.2 mm, color: Gray Commercial
More informationUK 2,5 N. Extract from the CD catalog. Order number:
Extract from the CD catalog UK 2,5 N Order number: 3003347 > https://eshop.phoenixcontact.com/phoenix/treeviewclick.do?uid=3003347 Feed-through modular terminal block, Type of connection: Screw connection,
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationSR60 Busbar System 2/1. 2/2 Busbar routing. 2/3 Mounting components. 2/6 Accessories
SR60 Busbar System 2 2/2 Busbar routing 2/3 Mounting components 2/6 Accessories 2/1 SR60 Busbar System Busbar routing SR60 Busbar System Dimensions Order No. Price PG Weight PS*/ W x H x D mm mm mm 1 item
More informationThis data sheet is only valid in association with the IL SYS INST UM E user manual.
Inline analog input terminal, 4 inputs for connecting voltage signals Data sheet 8081_en_01_C01 PHOENIX CONTACT 2015-04-14 1 Description The terminal is designed for use within an Inline station. It is
More informationOperating Manual / IEC. Explosion-Proofed Junction Boxes, Polyester. Wallücker Bahndamm 7 DE Kirchlengern
Operating Manual / IEC Explosion-Proofed Junction Boxes, Polyester Wallücker Bahndamm 7 DE- 32278 Kirchlengern Tel.: +49 5223 49107-0 Fax: +49 5223 49107-28 info@multi-box.com www.multi-box.com Contents
More informationPT 2X2-24DC-ST. Extract from the online catalog. Order No.:
Extract from the online catalog PT 2X2-24DC-ST Order No.: 2838228 The illustration shows version PT 2x2-5DC-ST Protective plug PT with protective circuit for two 2-core floating signal circuits. Nominal
More information604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
More informationUTI 16-PE. Extract from the online catalog. Order No.:
Extract from the online catalog UTI 16-PE Order No.: 3073830 Installation feed-through modular terminal block, blue, Special and hybrid connection, Cross section: - 25 mm², AWG: 10-4, Width: 12.2 mm, Color:
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationPIT 2,5-TWIN-DIO/R-L. Extract from the online catalog. Order No.:
Extract from the online catalog PIT 2,5-TWIN-DIO/R-L Order No.: 3210253 Feed-through modular terminal block, Type of connection: Leg spring connection, Leg spring connection, Number of positions: 1, Cross
More informationDistribution Systems for Sensors and Actuators
Distribution Systems for Sensors and Actuators Comprehensive OVERVIEW M12 Distribution Boxes M8 Distribution Boxes Accessories Distribution Systems for sensors and actuators THE RIGHT DISTRIBUTION BOX
More informationSAFETY EQUIPMENT EARTHING AND SHORT-CIRCUITING DEVICES angled, ball Ø20 or 25 mm EN/IEC (DIN VDE 0683 Part 100) and DIN Part 1
Points Installation Storage Phase and Earthing Points ball points, straight and angled, ball Ø20 or 25 mm EN/IEC 61230 (DIN VDE 0683 Part 100) and DIN 48088 Part 1 Suitable for fixing cable lugs or connecting
More informationENERGY SAFELY SWITCHED SWITCHGEAR. BUSBAR SYSTEM 60 mm
ENERGY SAFELY SWITCHED SWITCHGEAR BUSBAR SYSTEM 60 mm SWITCHGEAR ENERGY safely switched About Grupa Apator Who we are? Grupa Apator is a dynamic Polish capital group, it currently includes 14 companies
More information- 1 - Product catalogue PCB connection systems PCB terminals Clamping yoke connection LM 5.00 / 5.08 LM 5.00/135
General ordering data Order No. 1715360000 Part designation LM5.00/3/135 OR Version EAN 4008190365240 Qty. 500 pc(s). PCB terminal, Clamping yoke connection, Soldered connection, Clamping range, max.:
More informationData sheet C6 A modul 1 port 180 M AP pure white
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification surface-mount termination unit with C6modul 180 certified to GHMT Cat.6 re-embedded PVP component
More informationUDK 4. Extract from the online catalog. Order No.:
Extract from the online catalog UDK 4 Order No.: 2775016 1-level terminal block with double connection on both sides, cross section: 0.2-2.5 mm², AWG: 30-10, width: 6.2 mm, color: Gray Commercial data
More informationP.C. BOARD CONNECTORS
P.C. BOARD CONNECTORS Overview of our program NECT CONTA-ELECTRONICS [Connection systems] [Electronics] [P.C. board connectors] P.C. BOARD CONNECTORS www.designbuero-clou.de NEW! includes from 03: CONTA-BO
More informationenglish Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group
english 26 Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation
More informationPHOENIX CONTACT
Fast connection connector for PROFIBUS systems Data sheet 101610_en_07 PHOENIX CTACT 2011-11-17 1 Description The D-SUB series SUBC-PLUS-PROFIB is specially designed for use in PROFIBUS systems up to 12
More informationPHOENIX CONTACT - 05/2007
Ex Universal Module Carrier (Motherboard) for Accommodating 3-Wire Measuring Transducers, Intrinsically Safe, for a Maximum of 8 PI Ex Modules INTERFACE Data Sheet 103030_00_en PHOENIX CONTACT - 05/2007
More informationUT 2,5-PE. Extract from the online catalog. Order No.:
Extract from the online catalog UT 2,5-PE Order No.: 3044092 Feed-through modular terminal block, Type of connection: Screw connection, Screw connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm,
More informationAI561 Analog Input Module
Ordering Data DATA SHEET AI561 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1101 AI561, analog input module, 4 AI, U/I 1TNE 968 901 R3101 1TNE 968
More informationenglish Cable Entry Systems EMC Solutions innovative creative technology Product catalogue A company of the icotek group
english 27 Cable Entry Systems EMC Solutions innovative creative technology Product catalogue A company of the icotek group Ideas move Ideas move the world icotek GmbH is a privately held company in the
More informationTSX SCA 64 connection box
connection box General presentation The connection box is used for making connections to a MODBUS, JBUS or JNET bus in 2-wire or 4-wire mode. In 2-wire mode, the following can be connected to the box :
More informationIdentification System CIS3A-Mini
Inductive Identification System CISA-Mini One of the smallest plug-in read heads Interface adapter for fitting on the DIN rail in the control cabinet Miniature data carrier, diameter 10 x 4 mm Read distance
More informationZB4BW533 green flush illuminated pushbutton head Ø22 spring return for integral LED
Product datasheet Characteristics ZB4BW533 green flush illuminated pushbutton head Ø22 spring return for integral LED Main Range of product Harmony XB4 Product or component type Head for illuminated push-button
More informationTRIO-DIODE/12-24DC/2X10/1X20
Redundancy module INTERFACE Data sheet 104278_en_00 1 Description PHOENIX CONTACT 20100423 Features TRIO DIODE is the DINrail mountable redundancy module from the TRIO POWER product range. Using the redundancy
More information