CDQ2B20-DCT1710T CDQ2B32-DCR0859R

Transcription

1 Compact Clamp Unit CDQ2B2-DCT171T CDQ2B32-DCR85R ø2, ø32 Space saving Used to clamp the workpiece, and open or close the spatter cover of the workpiece. Clamping mechanism Cylinder unit Labor reduction Reduces design and assembly labor by integrating the cylinder and clamping mechanism. Compact Opening and closing the spatter cover Workpiece clamp Compact clamp unit based on the compact cylinder Possible to clamp in both directions Spatter cover mounting hole * Cover should be provided by the customer. Clamp unit used in common Both ø2 and ø32 clamp cylinders use the same clamp unit and only the clamp unit can be replaced. This contributes to reduction of spare parts. Capable of clamping in both directions with an arm opening/closing angle of or more Detection Switches Tubing Fittings Clamp Clamp Flow Control Equipment 1

2 Compact Clamp Unit CDQ2B2-DCT171T CDQ2B32-DCR85R ø2, ø32 RoHS How to Order ø2 CDQ2B2 2 DCT171T MBW Built-in auto switch magnet Compact clamp unit Bore size 2 2 mm ø32 CDQ2B32 2Z DCR85R MBW Built-in auto switch magnet Bore size mm Compact clamp unit Nil Auto switch Without auto switch For applicable auto switches, refer to the table below. Specifications Clamp Unit Part No. Bore size ø2 ø32 Stroke 2 mm Max. operating pressure 1. MPa Ambient temperature 1 C to 6 C (No freezing) Cushion Rubber bumper Mounting bracket Rod flange Arm opening/closing angle 6 (Cylinder retracting side 5 Cylinder extending side 1 ) * * Refer to the dimensions for details. Clamp unit part no. C2Q R-R Hexagon socket head cap screw for fixing clamp unit (included) M5 x 55L (For ø2) * M5 x 62L (For ø32) * * Two types of hexagon socket head cap screw for fixing the unit are included. Use them in accordance with the bore size. Applicable Auto Switches/Refer to the Web Catalog for further information on auto switches. Type Solid state auto switch Reed auto switch Special function Electrical entry 1 The 1 m lead wire is only applicable to the D-A3. 2 For D-P3DWA, only ø32 is available. Lead wire length symbols:.5 m Nil (Example) MNW 1 m M (Example) MNWM 3 m L (Example) MNWL 5 m Z (Example) MNWZ Indicator light Wiring (Output) Load voltage Auto switch model Lead wire length (m) DC AC Perpendicular In-line.5 (Nil) 1 (M) 3 (L) 5 None (Z) (N) Pre-wired connector Solid state auto switches marked with p are produced upon receipt of order. Applicable load MNV MN P P P p p IC 3-wire (PNP) V MPV MP P P P p p circuit 2-wire V MBV MB P P P p p MNWV MNW P P P p p IC Diagnostic indication 3-wire (PNP) V MPWV MPW P P P p p circuit Relay, (2-color indicator) Grommet Yes 24 V 2-wire V MBWV MBW P P P p p PLC MNAV MNA p p P p p IC Water resistant 3-wire (PNP) V MPAV MPA p p P p p circuit (2-color indicator) 2-wire V MBAV MBA p p P p p Magnetic field resistant (2-color indicator) 2-wire (Non-polar) P3DWA 2 P P P p Grommet 3-wire (NPN equivalent) 5 V A6V A6 P P IC circuit Yes V 1 V A3V 1 A3 P P P P Relay, 2-wire 24 V No 5 V, V 1 V or less AV A P P IC circuit PLC 113

3 Clamping Characteristics Extension arm (Load mass:. kg) Load cell Operating direction Measuring point Compact Clamp Unit CDQ2B2-DCT171T CDQ2B32-DCR85R Operating direction Load cell Extension arm (Load mass:. kg) Measuring point CDQ2B2-DCT171T 1 1. MPa 75.7 MPa 5.5 MPa.3 MPa.1 MPa MPa 5.7 MPa.5 MPa.3 MPa.1 MPa CDQ2B32-DCR85R MPa 15.7 MPa 1.5 MPa 5.3 MPa.1 MPa MPa 2.7 MPa 15.5 MPa 1.3 MPa 5.1 MPa Flow Control Equipment Fittings Tubing Detection Switches 1

4 CDQ2B2-DCT171T Dimensions CDQ2B2-2-DCT171T x ø6 through 2 x M5 x.8 depth 8 Spatter cover ( mounting hole) x M6 x 1. depth x Rc1/8 (Port size) 115

5 Dimensions CDQ2B32-2Z-DCR85R Compact Clamp Unit CDQ2B32-DCR85R x M5 x.8 depth 8 Spatter cover mounting hole x ø6 through ( ) 2 x M6 x 1. depth x Rc1/8 (Port size) Flow Control Equipment Fittings Detection Switches Tubing 116