ArrowLink Modular Wiring Devices. Devices which make installation faster, easier, more consistent and more cost effective.

Transcription

1 Modular iring Devices Devices which make installation faster, easier, more consistent and more cost effective.

2 Modular iring Devices The most complete device installation solution. Modular iring Devices change the game for electrical installers by providing an unequalled breadth of devices that offer greater speed and consistency to lower installation costs on the job site. Modular iring Devices Table of Contents Features The Advantage Straight Blade s Hospital rade s FCIs Isolated round s TVSS s Switches maximizes labor savings: Breadth of line provides efficiency in more applications Modular connections increase trim-out speed more than 2 to 1 Consistent connections eliminate mis-wiring and reduce call-backs Connector leads are prepped, stripped and ready to wire External connections provide job site flexibility Reduces number of trim-out installers required Narrows learning curve for apprentice labor 2 Modular Plug & Connector Modular Decorator & Toggle Switches Modular TVSS s

3 The benefits of modular devices for your entire job, not just a portion. hy limit yourself to general use duplex, isolated ground, and FCI receptacles? Modular iring Devices also provide you switches, single receptacles and TVSS devices! Modular Straight Blade Single & Duplex s Modular FCIs, Tamper Resistant FCIs Modular Isolated round s 3

4 Features The Advantage is designed to help you complete a job quickly and cost effectively. The breadth of line combined with unique installation flexibility and safety features provide a complete job solution. Leaded plug preserves the structural integrity of the base wiring device Plug and connector design provides first make/last break grounding connection One-piece impact-resistant connector for maximum durability during rough-in Polybag connector cover shields contacts from paint and drywall mud Plug leads #12 A stranded copper Terminal safety barriers provide insulation from conductive surfaces Connector leads #12 A, available in solid or stranded copper Audible click indicates a secure connection Slim profile and vertical wire orientation of device and connector assures ease of installation 4

5 Quality, Dependability and Versatility Patent-pending modular plugs and connectors provide high quality circuit connections while reducing overall installation time. Modular Switch Pre-wired modular switches available in both toggle and decorator styles for 120V or 277V Save time - no more taping terminals Pre-stripped wire leads for quicker connections during rough-in Unique switch and receptacle configurations will not inter-mate for added safety allows easy change-out for device maintenance wiring devices can easily be converted for standard installation Clearly marked, consistent pre-wired configurations eliminate mis-wiring of devices #12 A wire leads color coded for your 277V applications; see page 25 for 277V conductor color options 5

6 The Advantage Consistent installation for any job. s broad product offering plus the unique flexibility of an external connection style saves you time and labor no matter where the job takes you. works where you work... Healthcare Facilities Hospitals Medical offices Urgent care clinics Nursing homes Outpatient facilities Rehabilitation facilities Commercial & Retail Environments Offices Shopping malls & big box retail Resort & conference centers Casinos Restaurants Educational Institutions Schools & academies Colleges & universities Vocational & technical learning centers Institutes Conservatories... and makes installation a snap. Step 1 At rough-in, connect the pre-stripped leads of the connector to the building wire and push the protected connection back into the box until trim-out. Step 2 At trim-out, simply snap the device onto the pre-wired connector in the box. Step 3 Mount the device into the box, install the cover plate and finish the job on time. 6

7 staging lets you set the schedule. Let us handle the staging for you simply place your entire order prior to rough-in. e ll ship you the connectors immediately and ship the devices on whatever date you specify. You can stage your job... Two (2) Purchase Orders: Order your connectors at rough-in for immediate shipment Order your devices at trim-out based on these shipment lead times: - Less than 500 devices lead time: 3-5 business days ,000 devices lead time: 5-10 business days - Over 2,000 devices: consult factory for shipping lead time * Add 2 days for initial orders of color coded switches... or allow us to do it for you. Place only one (1) Purchase Order today: connectors ship immediately devices ship on the day you specify Change orders are also simple you can change the device order up to one (1) week prior to shipping without affecting the ship date.* *Changes less than a week prior to shipping may effect lead time ABC holesale Electric 345 Main Street Anytown, MN (777) TO: Cooper iring Devices 203 Cooper Circle Peachtree City, A PURCHASE ORDER MV Order 3/2/09 Date Due: SEE BELO SHIP TO: MegaVolt Electric st Street Sometown, MN Vendor Cust. # Ref. # FOB Point Ship Via Term MV Destination Pre-Paid 2% Line # Qty Ord Item / SKU # Description CR5362M 20A 125V Modular Duplex Recept 2 60 AH1221M 20A 120V Modular Toggle Switch M 20A 125V Modular Single Recept SM 20A 125V Modular Duplex TVSS Recept 5 20 I5362M 20A 125V Modular Duplex I Recept 6 40 VF20M 20A 125V Modular Duplex FCI Recept MCR125SOL Connector Solid 8 60 MCS120SOL Switch Connector Solid NOTE: Ship Lines 7 & 8 immediately Ship Lines 1, 2, 3 & 6 March 16, 09 Ship Lines 4 & 5 March 23, 09 Devices that arrive the way you want! features bulk packaging designed with the contractor in mind. All devices are shipped in convenient recyclable bulk pack cartons All packaging made of 100% recycled material Packaging sized for easy room-to-room transport No inner packaging speeds installation, eliminates waste, and reduces clean-up at the end of the job Incorporated honeycomb dividers allow a consistent package size across our entire product line for efficient shipping 7

8 Modular iring Devices o modular, increase efficiency and stay code compliant. modular devices are great at saving labor time and costs while not affecting conductor volume when calculating box fill. See the labor savings for yourself! Compare the bottom line, based on 1,000 installed devices and a modest labor rate of $50.00/hour: Conventional Installation Step, 5362 Labor time, % of 1 hr Labor cost (@ $50/hr) Device hr $4.50 ire (Pig Tails) hr $1.00 Connectors hr $0.50 Mud Ring hr $0.75 Box hr $2.50 Plate hr $0.75 Shim hr $1.00 Individual Total hr $11.00 x 1,000 openings hrs $11, Modular Installation Step, 5362M Labor time, % of 1 hr Labor cost (@ $50/hr) Device hr $1.88 Connector hr $0.50 Connectors hr $0.50 Mud Ring hr $0.75 Box hr $2.50 Plate hr $0.75 Shim hr $1.00 Individual Total hr $7.88 x 1,000 openings hrs $7, Labor Savings Per Opening $3.13 Total Project Labor Savings $3, Device install rate assumes at 2.5 to 1 over conventional devices Box Fill Calculations for Devices hen using, simply calculate box fill as normal plugs and connectors, like wirenuts, are not counted. Chart 1 (2) 12 A (2) 12 A Conductor volume example based on Chart 1: Switch line & load conductors (1 ea) Switch Connector Connector hot & neutral conductors (1 ea) All equipment grounding conductors count as a single conductor volume Each single gang device yoke counts as two (2 ea) ire connectors and pigtails do not count as conductor volume Strap/Yoke= (2) 12A 2 round ires= (1) 12 A 1 Strap/Yoke= (2) 12A Total Conductor Volume * Calculate volume for your application using formulas found in NEC section ** Box volume in Chart 1 based on 4" square x 2 1/2" box = 30.3 in. 3 Connectors are not counted toward box fill Box Fill: (9) 12A Conductors 9 x 2.25 = in 3 8

9 Finish your installation with the right wallplates. Available in multiple configurations, our wallplates meet NEC requirements for use in commercial, industrial and institutional areas. Stringent material specifications ensure wallplates that deliver strength and fire resistance. 302/304 Stainless Steel Designed, tested and manufactured to deliver top performance in demanding environments. Thermoplastic: and Nylon Virtually unbreakable with an easy-toclean finish and exclusive time-saving Screw-Catch feature that holds mounting screws captive to simplify installation. Stainless Steel Superior non-corrosive and nonmagnetic properties for applications needing added protection. Stainless steel alloy contains 18% chromium and 8% nickel for corrosion resistance. Stamped from 0.032" (0.81mm) thick material. Horizontally satin-brushed surface finish resists fingerprints. Matching stainless steel mounting screws provided. PJS Series Thermoplastic Screwless polycarbonate wallplates (PJS series) have a clean, streamlined look that can change out to a different color in seconds. Rugged construction for less breakage and more resistance to bowing. High gloss finish is soil resistant and easy to clean. Nylon wallplates have a flush-fitting, warp-resistant design. Nylon wallplates are chemically resistant to cleaning agents and solvents. wallplates have high structural rigidity, long-term form retention, plus superior impact and abrasion resistance. Matching mounting screws provided. allplates at a lance 302/304 Stainless Steel allplates Thermoplastic allplates Thermoplastic Nylon allplates 1-ang to 6-ang Standard, Mid-Size and Oversize Combination Configurations Coax/Telephone Configurations Pre-marked Special Use allplates Specification Box Size/Type Material Stainless Steel Nylon Standard Size Series Series Standard Size Extra Depth Pre-Marked Special EM93000, I EM5100 & Use, Standard Size & I97000 Series I5100 Series Mid-Size Series PJ Series --- PJS Series Pre-Marked Special --- PJ-EM, PJ-CO, --- Use, Mid-Size PJ-F & PJ-I Series Oversize Series

10 R R s Straight Blade s 2-Pole, 3-ire rounding 15A 125V, 15A 250V 20A 125V, 20A 250V 4.19" (106.4mm) 5362_M 2.38" (60.3mm) 5261_M 1.32" (33.5mm) Connector 1.36" (34.5mm) 1.98" (50.3mm) 1.41" (35.8mm) Lead Length: 6.00 (152.4mm) Industrial rade Duplex & Single s FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Exclusive 5-leaf solid brass line contacts ensure lowest heat rise, smooth plug blade insertion, long-term retention. Rigid, glass reinforced nylon base lends ultimate strength and superior high heat resistance in contact carrier. High impact and chemical-resistant nylon face " (1.27mm) solid brass mounting strap with non-riveted, integral one-piece grounding system for highest durability assures superior ground integrity under heaviest use. Long, broad mounting strap helps reach large panel cutouts for code compliance. Screw-Catch feature on duplex devices speeds mounting of wallplates. Back ire and Side ire 1 Piece round System F S 426 Rating Catalog No. Available A V NEMA Description Colors R Duplex 5262 M B, BK, Y, RD, V, Single 5261 M B, Y, V, R Duplex 5662 M B, V, R Duplex 5362 M B, BK, Y, LA, RD, V, Single 5361 M B, BK, Y, RD, V, R Duplex 5462 M B, Y, V, For ordering, include Cat. No. followed by the color code: B (Brown), BK (Black), Y (ray), LA (Light Almond), RD (Red), V (Ivory), (hite) Plug Connectors Description 125V Building ire Connector, Solid ire Catalog No. MCR125SOL C US 125V Building ire Connector, Stranded ire 250V Building ire Connector, Solid ire MCR125STR MCR250SOL 5-15R 5-20R 6-15R 6-20R 250V Building ire Connector, Stranded ire MCR250STR For Specification & Performance Data, see page 13. Patent Pending TESTIN & CODE COMPLIANCE Base Device: UL Listed to UL498, file no. E15058; UL verified to Federal Spec. S-596; CSA Certified to C22.2, no. 42, file no. 6914, class ; NOM Certified : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E MATERIAL CHARACTERISTICS Nylon with PVC terminal guards, except single: adhesive terminal barrier Base Device: ; temperature rating: -20ºC to 70ºC (-4ºF to 158ºF), except single: -20ºC to 60ºC (-4ºF to 140ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. 10

11 R R s Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V Industrial rade Duplex & Single s FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Exclusive 5-leaf solid brass line contacts ensure lowest heat rise, smooth plug blade insertion, long-term retention. Rigid, glass reinforced nylon base lends ultimate strength and superior high heat resistance in contact carrier. High impact and chemical-resistant nylon face. Exclusive 0.030" (0.76mm) solid brass, non-riveted, integral one-piece grounding shunt system assures ground integrity. Long, broad mounting strap helps reach large panel cutouts for code compliance. Screw-Catch feature on traditional style duplex devices speeds mounting of wallplates. Back ire and Side ire round Shunt F S 426 Rating Catalog No. Available A V NEMA Description Colors R Duplex 5252 M A, B, BK, BL, Y, LA, RD, V, Decorator Duplex 6262 M B, BK, Y, LA, RD, V, R Duplex 5352 M A, B, BK, BL, Y, LA, RD, V, Decorator Duplex 6362 M A, B, BK, Y, LA, RD, V, For ordering, include Cat. No. followed by the color code: A (Almond), B (Brown), BK (Black), BL (Blue), Y (ray), LA (Light Almond), RD (Red), V (Ivory), (hite) 4.19" (106.4mm) 5352_M 4.19" (106.4mm) 6262_M Connector 1.30" (33.0mm) 1.32" (33.5mm) 1.36" (34.5mm) 1.31" (33.2mm) Lead Length: 6.00 (152.4mm) Connectors Description 125V Building ire Connector, Solid ire Catalog No. MCR125SOL C US Plug 125V Building ire Connector, Stranded ire Patent Pending MCR125STR 5-15R 5-20R For Specification & Performance Data, see page 14. TESTIN & CODE COMPLIANCE Base Device: UL Listed to UL498, file no. E15058; UL verified to Federal Spec. S-596; CSA Certified to C22.2, no. 42, file no. 6914, class ; NOM Certified : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E MATERIAL CHARACTERISTICS Nylon with PVC terminal guards Base Device: ; temperature rating -20ºC to 70ºC (-4ºF to 158ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. 11

12 R R s Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V 1.30" (33.0mm) Construction rade Duplex s 4.19" (106.1mm) CR5262_M 1.31" (33.2mm) FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Compact, rugged design ideally suited to perform in the demanding construction specification grade field. Excellent plug blade retention provided by 0.037" (0.94mm) triple-wipe brass line contacts and 0.030" (0.76mm) brass ground " (1.27mm) galvanized steel, wrap-around yoke mounting strap for superior assembly security; extra length/width helps reach large panel cutouts for code compliance. High impact and chemical-resistant nylon face. Screw-Catch feature speeds mounting of wallplates. Connector Lead Length: 6.00 (152.4mm) Back ire and Side ire Compact Design F S Rating Catalog No. Available A V NEMA Description Colors R Duplex CR5262 M B, Y, LA, V, R Duplex CR5362 M B, BK, Y, LA, V, For ordering, include Cat. No. followed by the color code: B (Brown), BK (Black), Y (ray), LA (Light Almond), V (Ivory), (hite) Plug Connectors Description 125V Building ire Connector, Solid ire 125V Building ire Connector, Stranded ire Patent Pending Catalog No. MCR125SOL MCR125STR C US 5-15R 5-20R For Specification & Performance Data, see page 14. TESTIN & CODE COMPLIANCE Base Device: UL Listed to UL498, file no. E15058; UL verified to Federal Spec. S-596; CSA Certified to C22.2, no. 42, file no. 6914, class : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E MATERIAL CHARACTERISTICS Nylon & PVC with adhesive terminal barrier Base Device: Flammability meets UL 94 requirements; V2 rated; temperature rating: -20ºC to 60ºC (-4ºF to 140ºF) : Flammability meets UL 94 requirements; V2 rated; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. 12

13 s Specification & Performance Data Straight Blade s 2-Pole, 3-ire rounding 15A 125V, 15A 250V 20A 125V, 20A 250V Application Specification grade duplex receptacles are challenged on a daily basis to provide a consistent, reliable means of connectivity in a wide variety of environments. The applications vary greatly by environment and provide challenges from impact and chemical resistance to environmental extremes such as heat and moisture. The breadth of the Arrow Hart Straight Blade line provides solutions for the widest variety of environments and applications. Features include high impact- and chemical-resistant nylon faces to withstand abuse and maintain structural integrity plus durable contact designs for long life blade retention and reduction of potential heat build up. Safety barriers provide insulation from conductive surfaces. Patent-pending modular plug and connector provide consistent high quality circuit connections and reduce overall installation time on the job. Type iring Type Testing & Code Compliance Base Device Combined Specifications: Base Device Electrical, Base Device Electrical, Mechanical Screw Terminal uards Materials Top Housing Bottom Housing Strap Auto round Clip Line Contacts Terminal & round Screws Housing Contacts ire Leads Industrial rade Duplex: 5262_M, 5362_M, 5462_M, 5662_M Series; : MCR125_, MCR250_ Series : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no. E15058 UL verified to Federal Spec. S-596 CSA Certified to C22.2, no. 42, file no. 6914, class NOM Certified Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Temperature rating: -20ºC to 70ºC (-4ºF to 158ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: PVC hinged doors lass-filled nylon 0.05" thick solid brass 0.032" thick 5-leaf brass #8-32 brass, neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A Industrial rade Single: 5261_M, 5361_M Series; : MCR125_ Series : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no. E15058 UL verified to Federal Spec. S-596 CSA Certified to C22.2, no. 42, file no. 6914, class NOM Certified Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Temperature rating: -20ºC to 60ºC (-4ºF to 140ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: UL Recognized Insulating Material Dielectric Strength: 2,000V Min HI Rating: 4 Min. Relative Temperature Index, Electrical: 80ºC (176ºF) Flammability: V0 (UL94) Nylon 0.05" thick steel, zinc plated, yellow chromate Phosphor bronze.037" thick triple-wipe brass #8-32 brass; neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A 13

14 s Specification & Performance Data Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V Application Specification grade duplex receptacles are challenged on a daily basis to provide a consistent, reliable means of connectivity in a wide variety of environments. The applications vary greatly by environment, and provide challenges from impact and chemical resistance to environmental extremes such as heat and moisture. The breadth of the Arrow Hart Straight Blade line provides solutions for all environments and applications. Features include high impact- and chemical-resistant nylon faces to withstand abuse and maintain structural integrity plus durable contact designs for long life blade retention and reduction of potential heat build up. Safety barriers provide insulation from conductive surfaces. Patent-pending modular plug and connector provide consistent high quality circuit connections and reduce overall installation time on the job. Type iring Type Testing & Code Compliance Base Device Combined Specifications: Base Device Electrical, Base Device Electrical, Mechanical Screw Terminal uards Materials Top Housing Bottom Housing Strap round Contact Auto round Clip Line Contacts Terminal & round Screws Housing Contacts ire Leads Industrial rade: Decorator Duplex 6262_M, 6362_M Series; Duplex 5252_M, 5352_M Series; : MCR125_Series : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no. E15058 UL verified to Federal Spec. S-596 CSA Certified to C22.2, no. 42, file no. 6914, class NOM Certified Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Temperature rating: -20ºC to 70ºC (-4ºF to 158ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: PVC hinged doors lass-filled nylon 0.05" thick galvanized steel 0.05" thick solid brass ground shunt 0.032" thick 5-leaf brass #8-32 brass, neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A Construction rade Duplex CR5262_M, CR5362_M Series; : MCR125_ Series : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no. E15058 UL verified to Federal Spec. S-596 CSA Certified to C22.2, no. 42, file no. 6914, class Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Temperature rating: -20ºC to 60ºC (-4ºF to 140ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: UL Recognized Insulating Material Dielectric Strength: 2,000V Min HI Rating: 4 Min. Relative Temperature Index, Electrical: 80ºC (176ºF) Flammability: V0 (UL94) PVC 0.05" thick galvanized steel 0.032" thick brass ground contact Phosphor bronze.037" thick triple-wipe brass #8-32 steel, brass plated; neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A 14

15 R R Modular Hospital rade Hospital rade Straight Blade s 2-Pole, 3-ire rounding 15A 125V, 15A 250V 20A 125V, 20A 250V Hospital rade Duplex s FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Back ire and Side ire 1 Piece round System F S 426 Rating Catalog No. Available A V NEMA Description Colors R Hospital Duplex 8200 M B, BK, Y, RD, V, Hospital Duplex Illuminated 8200LT M RD, V, Hospital Decorator Duplex 8262 M B, BK, Y, RD, V, Hospital Decorator Duplex Illuminated 8262LT M V, R Hospital Duplex 8600 M* V, R Hospital Duplex 8300 M B, BK, Y, LA, RD, V, Hospital Duplex Illuminated 8300LT M RD, V, Hospital Decorator Duplex 8362 M B, BK, Y, RD, V, Hospital Decorator Duplex Illuminated 8362LT M RD, V, R Hospital Duplex 8400 M* B, Y, RD, V, For ordering, include Cat. No. followed by the color code: B (Brown), BK (Black), Y (ray), LA (Light Almond), RD (Red), V (Ivory), (hite) *Not NOM Certified Connectors C Description Catalog No. 125V Building ire Connector, Solid ire MCR125SOL 125V Building ire Connector, Stranded ire MCR125STR 250V Building ire Connector, Solid ire MCR250SOL 250V Building ire Connector, Stranded ire MCR250STR Patent Pending TESTIN & CODE COMPLIANCE Base Device: UL Listed to UL498, file no E15058; UL verified to Federal Spec. C-596; CSA Certified to C22.2, no. 42, file no. 6914, class ; NOM Certified, except 8400, 8600 : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Exclusive 5-leaf brass line contacts ensure lowest heat rise, smooth plug blade insertion, long-term retention and corrosion resistance " (1.27mm) solid brass mounting strap with non-riveted, integral one-piece grounding system assures superior ground integrity, durability and corrosion resistance under heaviest use. Long-life neon bulb in illuminated devices easily locates emergency circuits. 5-15R 5-20R 6-15R 6-20R For Specification & Performance Data, see page 17. MATERIAL CHARACTERISTICS Nylon with PVC terminal guards Base Device: ; temperature rating: -40ºC to 60ºC (-40ºF to 140ºF), except decorator: -20ºC to 70ºC (-4ºF to 158ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. US 4.19" (106.4mm) 8362_M 4.19" (106.4mm) 8200_M 1.32" (33.5mm) 1.32" (33.5mm) Connector Plug 1.31" (33.2mm) 1.31" (33.2mm) Lead Length: 6.00 (152.4mm) 15

16 R R R Modular Hospital rade Hospital rade Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V 4.19" (106.4mm) TR8200_M 2.38" (60.3mm) 8310_M 1.30" (33.0mm) Connector Plug 5-15R 5-20R 1.31" (33.2mm) 1.98" (50.3mm) 1.41" (35.8mm) Lead Length: 6.00 (152.4mm) Tamper Resistant For Specification & Performance Data, see pages 17 & 18. Hospital rade Tamper Resistant, Compact & Single s FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Compact devices have a sturdy design that delivers full hospital grade performance in a lower profile. Tamper Resistant devices feature a Tamper Resistant patented spring-loaded mechanical shutter system for reliable tamper resistance and compliance with NEC Art (C) requiring tamper resistant outlets in pediatric care locations. Heavy gauge, 0.037" (0.94mm) triple-wipe brass line contacts provide excellent long-term plug blade retention. High impact- and chemical-resistant nylon face " (0.76mm) solid brass, non-riveted, integral one-piece grounding shunt system assures ground integrity under heaviest use. Long, broad mounting strap helps reach large panel cutouts for code compliance. Screw-Catch feature on duplex devices speeds mounting of wallplates. Back ire and Side ire round Shunt C US F Rating Catalog No. Available A V NEMA Description Colors R Tamper Resistant Hospital Duplex TR8200 M* B, Y, RD, V, Tamper Resistant Compact Hospital Duplex 8200H M B, Y, RD, V, Hospital Single 8210 M B, Y, RD, V, R Tamper Resistant Hospital Duplex TR8300 M* B, Y, RD, V, Tamper Resistant Compact Hospital Duplex 8300H M B, Y, RD, V, Hospital Single 8310 M B, Y, RD, V, For ordering, include Cat. No. followed by the color code: B (Brown), Y (ray), RD (Red), V (Ivory), (hite) * Not CSA Certified Connectors Description 125V Building ire Connector, Solid ire 125V Building ire Connector, Stranded ire Patent Pending Catalog No. MCR125SOL MCR125STR S AVAILABLE Q2 2009! AVAILABLE Q2 2009! C US TESTIN & CODE COMPLIANCE Base Device: UL Listed to UL498, file no. E15058, except TR: culus Listed; UL verified to Federal Spec. C-596; compact & single also CSA Certified to C22.2, no. 42, file no. 6914, class : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E MATERIAL CHARACTERISTICS Nylon with adhesive terminal barrier, except TR: nylon & PVC Base Device: ; temperature rating: -40ºC to 60ºC (-40ºF to 140ºF), except compact: -20ºC to 70ºC (-4ºF to 158ºF), single: -20ºC to 60ºC (-4ºF to 140ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. 16

17 Modular Hospital rade s Specification & Performance Data Hospital rade Straight Blade s 2-Pole, 3-ire rounding 15A 125V, 15A 250V 20A 125V, 20A 250V Application From abrupt plug removal to corrosive cleaning agents, receptacles in health care facilities are challenged to provide consistent and reliable connectivity with critical consequences. Hospital rade Straight Blade Devices provide consistent performance under the most demanding conditions with features including high impact- and chemical-resistant nylon faces, glass reinforced nylon bases for superior strength and heat resistance plus durable contact designs for long life, enhanced blade retention and reduction of potential heat build-up. Type iring Type Testing & Code Compliance Specifications: Base Device Base Device Combined Electrical, Base Device Electrical, Mechanical Screw Terminal uards Materials Top Housing Bottom Housing Strap Auto round Clip Line Contacts Terminal & round Screws Illuminated Models Housing Contacts ire Leads Hospital rade Decorator Duplex Hospital rade Duplex : Hospital rade Compact Duplex : 8262_M, 8362_M Series; 8200_M, 8300_M, 8400_M, 8600_M Series; : 8200H_M, 8300H_M Series; : MCR125_ Series : MCR125_, MCR250_ Series : MCR125_ Series : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no E15058 UL verified to Federal Spec. C-596 CSA Certified to C22.2, no. 42, file no. 6914, class NOM Certified Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 70ºC (-4ºF to 158ºF) Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at fullrated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: PVC hinged doors lass-filled nylon 0.05" thick solid brass 0.032" thick 5-leaf brass #8-32 steel, ground screw green Long-life neon bulb Solid or stranded THHN #12 A : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no E15058 UL verified to Federal Spec. C-596 CSA Certified to C22.2, no. 42, file no 6914, class NOM Certified except 8400, 8600 Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Flammability meets UL 94 requirements; V2 rated Temperature rating: -40ºC to 60ºC (-40ºF to 140ºF) Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at fullrated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: PVC hinged doors lass-filled nylon 0.05" thick solid brass, nickel plated 0.032" thick 5-leaf brass, nickel plated #8-32 brass, neutral screw nickel plated, ground screw green Long-life neon bulb Solid or stranded THHN #12 A : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no E15058 UL verified to Federal Spec. C-596 CSA Certified to C22.2, no. 42, file no. 6914, class Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 70ºC (-4ºF to 158ºF) Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at fullrated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: PVC hinged doors Nylon 0.05" thick steel, zinc plated Bronze wire 0.037" triple-wipe brass #8-32 steel, ground screw green N/A Solid or stranded THHN #12 A 17

18 Modular Hospital rade s Specification & Performance Data Hospital rade Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V Application Health care facilities are some of the most demanding environments for electrical receptacles. From abrupt plug removal to corrosive cleaning agents, these devices are challenged on a daily basis to provide a consistent, reliable means of connectivity with critical consequences. Arrow Hart s line of Hospital rade Straight Blade Devices provide the breadth of line needed for all environments within these facilities. These devices provide consistent performance under the most demanding conditions with features including high impact- and chemical-resistant nylon faces, glass reinforced nylon bases for superior strength and heat resistance, durable contact designs for long life, enhanced blade retention and reduction of potential heat build-up, plus back and side wiring capabilities that reduce installation time and provide high quality terminations. Safety barriers provide insulation from conductive surfaces. Patent-pending modular plug and connector provide consistent high quality circuit connections and reduce overall installation time on the job. Type iring Type Testing & Code Compliance Base Device Combined Specifications: Base Device Electrical, Base Device Electrical, Mechanical Screw Terminal uards Materials Top Housing Bottom Housing Strap Auto round Clip Line Contacts Terminal & round Screws Housing Contacts ire Leads Hospital rade Tamper Resistant Duplex : TR8200_M, TR8300_M Series; : MCR125_Series : Integral wire leads, crimped & resistance welded culus listed to UL498, file no. E15058 UL verified to Federal Spec. C-596 Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Temperature rating: -40ºC to 60ºC (-40ºF to 140ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL 498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: UL Recognized Insulating Material Dielectric Strength: 2,000V Min HI Rating: 4 Min. Relative Temperature Index, Electrical: 80ºC (176ºF) Flammability: V0 (UL94) PVC 0.05" thick steel, zinc plated 0.037" triple wipe brass #8-32 brass; neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A Tamper Resistant Hospital rade Single : 8210_M, 8310_M Series; : MCR125_ Series : Integral wire leads, crimped & resistance welded UL listed to UL498, file no. E15058 UL verified to Federal Spec. C-596 CSA Certified to C22.2, no. 42, file no. 6914, class Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Temperature rating: -20ºC to 60ºC (-4ºF to 140ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL 498 Temperature Rise: max. 30ºC (86 F) after 2500 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: UL Recognized Insulating Material Dielectric Strength: 2,000V Min HI Rating: 4 Min. Relative Temperature Index, Electrical: 80ºC (176ºF) Flammability: V0 (UL94) Nylon 0.05" thick galvanized steel Bronze wire 0.037" triple wipe brass #8-32 steel; neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A 18

19 R R R Modular FCIs round Fault Circuit Interrupters 2-Pole, 3-ire rounding 15A 125V 20A 125V Hospital & Specification rade FCIs FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Hospital Specification rade Back ire and Side ire Hospital rade models UL Listed, fully compliant with all latest UL943 (4th edition) Class A FCI and UL498 Hospital rade requirements. Tamper Resistant models comply with 2008 NEC Article requiring all dwelling Tamper Resistant unit receptacles to be tamper resistant. ShockSentry lock-out function prevents miswired line-load connections and FCI circuitry damage. Large visual indicator light provides quick visual reference of a tripped or end of life condition. 20A feed through rating. Longer, wider bridged strap provides 40% more contact area with wallboard, virtually eliminating floating installations. Matching standard size thermoplastic wallplate included. Rating Catalog No. Available A V NEMA Description Colors R Tamper Resistant FCI AVAILABLE TRVFH15 M LA, RD, Q2 2009! Tamper Resistant FCI VFH15 M LA, RD, R Tamper Resistant FCI AVAILABLE TRVFH20 M B, Y, LA, RD, V, Q2 2009! Tamper Resistant FCI VFH20 M B, Y, LA, RD, V, Specification rade Back ire and Side ire C US 426 Rating Catalog No. Available A V NEMA Description Colors R Tamper Resistant FCI TRVF15 M A, B, BK, Y, LA, V, Tamper Resistant FCI VF15 M A, B, BK, Y, LA, V, R Tamper Resistant FCI TRVF20 M A, B, BK, Y, LA, V, Tamper Resistant FCI VF20 M A, B, BK, Y, LA, V, For ordering, include Cat. No. followed by the color code: A (Almond), B (Brown), BK (Black), Y (ray), LA (Light Almond), RD (Red), V (Ivory), (hite) C US " (106.4mm) VFH20_M 4.19" (106.4mm) 1.30" (33.0mm) 1.30" (33.0mm) TRVF15_M Connector Plug 1.64" (41.7mm) 1.64" (41.7mm) Lead Length: 6.00 (152.4mm) Tamper Resistant Connectors Description 125V Building ire Connector, Solid ire 125V Building ire Connector, Stranded ire Patent Pending TESTIN & CODE COMPLIANCE Base Device: culus listed to UL498 and UL943, file no. E60120; meets all UL943 (FCI), UL498 (s) and applicable CSA requirements; Hospital rade versions also meet all UL498 Hospital rade requirements; NOM Certified : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E Catalog No. MCR125SOL MCR125STR C MATERIAL CHARACTERISTICS Nylon & PVC with adhesive terminal barrier, except Hospital rade: nylon & polycarbonate Base Device: ; temperature rating: -35ºC to 66ºC (-31ºF to 150.8ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. US 5-15R 5-20R For Specification & Performance Data, see page

20 Modular FCI s Specification & Performance Data round Fault Circuit Interrupters 2-Pole, 3-ire rounding 15A 125V 20A 125V Application FCI receptacles are designed with the safety of the user in mind. In commercial and industrial areas like public bathrooms, breakrooms and food service areas, the NEC requires FCI receptacles. Arrow Hart FCI receptacles are UL Listed and fully compliant with all of the latest UL943 (4th Edition) Class A FCI and UL498 requirements. Additionally, FCIs incorporate our ShockSentry lock-out function to protect against mis-wired line-load connections and FCI circuitry damage. Safety barriers provide insulation from conductive surfaces. Patent-pending modular plug and connector provide consistent high quality circuit connections and reduce overall installation time on the job. Type iring Type Testing & Code Compliance Base Device Combined Tamper Resistant Hospital rade FCI Duplex TRVFH15_M, TRVFH20_M Series; Hospital rade FCI Duplex VFH15_M, VFH20_M Series; : MCR125_Series : Integral wire leads, crimped & resistance welded culus listed to UL498 and UL943, file no. E60120 Meets all UL943 (FCI), UL498 (s), UL498 Hospital rade and applicable CSA requirements NOM Certified Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Tamper Resistant Tamper Resistant Specification rade FCI Duplex : TRVF15_M, TRVF20_M Series; Specification rade FCI Duplex : VF15_M, VF20_M Series; : MCR125_ Series : Integral wire leads, crimped & resistance welded culus listed to UL498 and UL943, file no. E60120 Meets all UL943 (FCI), UL498 (s) and applicable CSA requirements NOM Certified Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Tamper Resistant Specifications: Base Device Electrical, Base Device Electrical, Mechanical Screw Terminal uards Materials Top Housing Bottom Housing Strap Terminals Terminal & round Screws Housing Contacts ire Leads Temperature rating: -35ºC to 66ºC (-31ºF to 150.8ºF) Temperature rating:-20ºc to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 100 cycles of 150% of rated current (DC) Trip Time:.025 seconds (class A) Frequency: 60 Hz; Voltage: 125 V; Amperage: 15A/20A 20A Feed Thru Maximum Interrupting Capacity: 20 amps Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: UL Recognized Insulating Material Dielectric Strength: 2,000V Min HI Rating: 4 Min. Relative Temperature Index, Electrical: 80ºC (176ºF) Flammability: V0 (UL94) 0.047" thick steel, zinc plated #8-32 steel, brass plated; neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A Temperature rating: -35ºC to 66ºC (-31ºF to 150.8ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 100 cycles of 150% of rated current (DC) Trip Time:.025 seconds (class A) Frequency: 60 Hz; Voltage: 125 V; Amperage: 15A/20A 20A Feed Thru Maximum Interrupting Capacity: 20 amps Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: UL Recognized Insulating Material Dielectric Strength: 2,000V Min HI Rating: 4 Min. Relative Temperature Index, Electrical: 80ºC (176ºF) Flammability: V0 (UL94) PVC 0.047" thick steel, zinc plated #8-32 steel, brass plated; neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A 20

21 R R R Modular Isolated round Isolated round Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V Duplex Isolated round s FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Exclusive 5-leaf, brass line contacts ensure lowest heat rise, smooth plug blade insertion, long-term retention and corrosion resistance. Back ire and Side ire 1 Piece round System Rigid, glass reinforced nylon base lends ultimate strength and superior high heat resistance in contact carrier. High impact and chemical-resistant nylon face. Decorator models have 0.050" (1.27mm) solid brass, nickel-plated mounting strap with nonriveted, integral one-piece isolated grounding shunt system for highest durability assures superior ground integrity and corrosion resistance under heaviest use. Traditional style duplex models have 0.030" (0.76mm) solid brass, non-riveted, integral onepiece isolated grounding shunt system assures ground integrity under heaviest use isolated from common building ground. Long, broad mounting strap helps reach large panel cutouts for code compliance. Screw-Catch feature on traditional style duplex devices speeds mounting of wallplates. Rating Catalog No. Available A V NEMA Description Colors R Hospital Decorator I I8262 M Y, RN, V, R Hospital Decorator I I8362 M Y, RN, V, Back ire and Side ire round Shunt Rating Catalog No. Available A V NEMA Description Colors R Hospital Duplex I I8200 M Y, RD, RN, V, Duplex I I5262 M Y, RD, RN, V, R Hospital Duplex I I8300 M Y, RD, RN, V, Duplex I I5362 M BK, Y, RD, RN, V, For ordering, include Cat. No. followed by the color code: BK (Black), Y (ray), RN (Orange), RD (Red), V (Ivory), (hite) Connectors Description 125V Building ire Connector, Solid ire 125V Building ire Connector, Stranded ire Patent Pending Catalog No. F F MCR125SOL MCR125STR S S C US 4.19" (106.4mm) I8262_M 4.19" (106.4mm) I5362_M Connector 1.32" (33.5mm) 1.30" (33.0mm) Plug 1.31" (33.2mm) 1.31" (33.2mm) Lead Length: 6.00 (152.4mm) 5-15R 5-20R For Specification & Performance Data, see page 22. TESTIN & CODE COMPLIANCE Base Device: UL Listed to UL498, file no E15058; UL verified to Federal Spec. C-596; CSA Certified to C22.2, no. 42, file no. 6914, class : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E MATERIAL CHARACTERISTICS Nylon with PVC terminal guards, except Hospital rade: nylon terminal guards Base Device: ; temperature rating: -20ºC to 70ºC (-4ºF to 158ºF), except I8200_M & I8300_M: -40ºC to 60ºC (-40ºF to 140ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. 21

22 Modular Isolated round s Specification & Performance Data Isolated round Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V Application The grounding network in any commercial building protects both people and equipment. It can also conduct electromagnetic interference, or electronic noise which distorts electronic signals and causes sensitive electronic equipment to operate improperly. In commercial facilities, the transfer of reliable, undistorted information is crucial to daily business. Isolated round Straight Blade s utilize our exclusive solid brass, non-riveted, integral one-piece isolated grounding shunt system to assure ground integrity under the heaviest use. Patent-pending modular plug and connector provide high quality circuit connections and reduce overall installation time. Type Hospital rade Decorator Duplex Hospital rade Duplex Industrial rade Duplex Isolated round: I8262_M, I8362_M Isolated round: I8200_M, I8300_M Isolated round: I5262_M, I5362_M Series; : MCR125_ Series Series; : MCR125_ Series Series; : MCR125_ Series iring Type Testing & Code Compliance Specifications: Base Device Base Device Combined Electrical, Base Device Electrical, Mechanical Screw Terminal uards Materials Top Housing Bottom Housing Strap & Isolated round Contact Auto round Clip Line Contacts Terminal & round Screws Housing Contacts ire Leads : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no E15058 UL verified to Federal Spec. C-596 CSA Certified to C22.2, no. 42, file no. 6914, class Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 70ºC (-4ºF to 158ºF) Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at fullrated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: Nylon hinged doors lass-filled nylon Strap 0.05" galvanized steel; ground shunt 0.05" solid brass, one piece 0.032" 5-leaf brass #8-32 brass, neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no E15058 UL verified to Federal Spec. C-596 CSA Certified to C22.2, no. 42, file no. 6914, class Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Flammability meets UL 94 requirements; V2 rated Temperature rating: -40ºC to 60ºC (-40ºF to 140ºF) Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at fullrated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: PVC hinged doors lass-filled nylon Strap 0.05" galvanized steel; ground shunt 0.05" solid brass, one piece 0.032" 5-leaf brass #8-32 brass, neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A : Integral wire leads, crimped & resistance welded UL Listed to UL498, file no E15058 UL verified to Federal Spec. C-596 CSA Certified to C22.2, no. 42, file no. 6914, class Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 70ºC (-4ºF to 158ºF) Flammability meets UL 94 requirements; V2 rated Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 250 cycles of 200% of rated current (DC) Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at fullrated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device Material: PVC hinged doors lass-filled nylon Strap 0.05" galvanized steel; ground shunt 0.05" solid brass, one piece 0.032" 5-leaf brass #8-32 brass, neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A 22

23 R Modular TVSS s TVSS Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V Duplex TVSS s with LED Indicators & Switched Alarm FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Hospital and Commercial rade - Back ire and Side ire Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Provides surge protection for hot to neutral and hot to ground. High impact thermoplastic construction. Shallow depth for easy installation. reen LED indicators to verify surge protection and ground. Audible alarm indicates bad ground connection or expired surge protection. Front access switch for muting audible alarm until device is replaced. Rating Catalog No. Available A V NEMA Description Colors R Hospital TVSS 8200 SM BL, Y, V, Hospital Isolated round TVSS I8200H SM BL, Y, RN, V, TVSS 5262 SM BL, Y, V, Isolated round TVSS I5262 SM BL, RN, R Hospital TVSS 8300 SM BL, Y, RD, V, Hospital Isolated round TVSS I8300H SM BL, Y, RN, V, TVSS 5362 SM BL, Y, V, Isolated round TVSS I5362 SM BL, Y, RN, V, For ordering, include Cat. No. followed by the color code: BL (Blue), Y (ray), RN (Orange), RD (Red), V (Ivory), (hite) 3.81" (96.8mm) 1.31" (33.3mm) I8200H_SM 3.81" (96.8mm) 5362_SM 1.31" (33.3mm) Connector 1.64" (41.7mm) 1.64" (41.6mm) 2.69" (68.3mm) 2.69" (68.3mm) Lead Length: 6.00 (152.4mm) Connectors Description 125V Building ire Connector, Solid ire Catalog No. MCR125SOL C US Plug 125V Building ire Connector, Stranded ire Patent Pending MCR125STR 5-15R 5-20R For Specification & Performance Data, see page 24. TESTIN & CODE COMPLIANCE Base Device: UL listed to UL498 and UL1449, file no. E2369; CSA Certified to C22.2, no. 42, file no , except Hospital rade: file no : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E MATERIAL CHARACTERISTICS Nylon with adhesive terminal barrier Base Device: ; temperature rating: -20ºC to 60ºC (-4ºF to 140ºF), except Hospital rade: -40ºC to 60ºC (-40ºF to 140ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. 23

24 Modular TVSS s Specification & Performance Data TVSS Straight Blade s 2-Pole, 3-ire rounding 15A 125V 20A 125V Application Commercial buildings and industrial facilities are filled with sensitive electronic equipment that businesses depend on for the function of critical daily operations. Substantial transient voltage can be initiated from external lighting strikes and grid switching, but the majority of transients are created within a facility. Arrow Hart TVSS s are manufactured from high impact thermoplastics and boast exceptional clamping and surge current ratings. They are available in isolated ground and non-isolated ground with optional audible alarm to indicate bad ground connection or expired surge protection. Safety barriers provide insulation from conductive surfaces. Patentpending modular plug and connector provide consistent high quality circuit connections and reduce overall installation time on the job. Type iring Type Testing & Code Compliance Base Device Combined Hospital rade Isolated round Duplex TVSS : I8200H_SM, I8300H_SM Series; Hospital rade Duplex TVSS : 8200_SM, 8300_SM Series; : MCR125_Series : Integral wire leads, crimped & resistance welded UL listed to UL498 and UL1449, file no. E2369 CSA Certified to C22.2, no. 42, file no Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Commercial Specification rade Isolated round Duplex TVSS : I5262_SM,I5362_SM Series; Commercial Specification rade Duplex TVSS : 5262_SM, 5362_SM Series; : MCR125_ Series : Integral wire leads, crimped & resistance welded UL listed to UL498 and UL1449, file no. E2369 CSA Certified to C22.2, no. 42, file no Plug & connector culus Listed to UL2459 file no. E culus Listed wiring assembly, UL file no. E Specifications: Base Device Electrical, Base Device Electrical, Mechanical Screw Terminal uards Materials Top Housing Bottom Housing Strap Line Contacts Terminal & round Screws Housing Contacts ire Leads Temperature rating: -40ºC to 60ºC (-40ºF to 140ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 100 cycles of 150% of rated current (DC) Clamping voltage: 400V; Joules/MCOV: 280J/150V/AC RMS Maximum Surge Current: 18kA per mode Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device reen LED indicators to verify surge protection and ground Audible alarm indicates compromised connection or surge protection has expired Front access switch for muting audible alarm until device is replaced Material: UL Recognized Insulating Material Dielectric Strength: 2,000V Min HI Rating: 4 Min. Relative Temperature Index, Electrical: 80ºC (176ºF) Flammability: V0 (UL94) Nylon 0.05" thick steel, zinc plated with gold chromate 0.037" triple wipe brass #8-32 brass; neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A Temperature rating: -20ºC to 60ºC (-4ºF to 140ºF) Temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. Dielectric Voltage: withstands 2000V per UL498 Temperature Rise: max. 30ºC (86 F) after 100 cycles of 150% of rated current (DC) Clamping voltage: 400V; Joules/MCOV: 280J/150V/AC RMS Maximum Surge Current: 18kA per mode Temperature Rise: Max. 50ºC (122 F) while conducting 35A after 10 cycles of 52.5A / AC Dielectric Voltage: withstands 1600V per UL2459 Current interrupting: limited cycles at full-rated current Base Device Terminal Accommodation: #14 - #10 A ire Leads: #12 A Voltage ratings permanently marked on device reen LED indicators to verify surge protection and ground Material: UL Recognized Insulating Material Dielectric Strength: 2,000V Min HI Rating: 4 Min. Relative Temperature Index, Electrical: 80ºC (176ºF) Flammability: V0 (UL94) Nylon 0.05" thick steel, zinc plated with gold chromate #8-32 brass; neutral screw nickel plated, ground screw green Solid or stranded THHN #12 A 24

25 R R R Modular Switches Industrial rade Toggle Switches AC Quiet Switches 15A 120/277V/AC 20A 120/277V/AC Industrial rade AC Quiet Toggle Switches FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Industrial rade - Back and Side ire Exclusive screw terminal guards provide a protective barrier from conductive surfaces. Industrial design cam action mechanism insures quiet switch action. Color-coded faces identify amperage: blue=15 amp, red=20 amp " (1.27mm) thick steel mounting strap, zincplated for corrosion resistance. 120/277V/AC rating ideal for fluorescent lighting fixtures typical in commercial applications. Lighted version toggle glows when in the off position. 277V versions available with different lead color combinations for local color coding requirements (standard lead colors are black, black, and green for Line (LI)/Load (LO)/round ( ) sequence). Rating Catalog No. Available A V/AC Description Colors /277 Modular Single Pole Toggle Switch AH1201 M* B, Y, RD, V, Modular Single Pole Lighted Toggle Switch AH1201LT M* V, /277 Modular Single Pole Toggle Switch AH1221 M* B, BK, Y, LA, RD, V, Modular Single Pole Lighted Toggle Switch AH1221LT M* V, C US F S " (60.5mm) 1.31" (33.3mm) AH1201_M 2.38" (60.5mm) 1.31" (33.2mm) AH1221LT_M 2.40" (61.0mm) 1.50" (38.1mm) 2.40" (61.0mm) 1.50" (38.1mm) Lead Color Configuration Switch Connectors Description Catalog No. Lead Color Sequence (Line/Load/round) Modular Switch 120V MCS120SOL Black, Black, reen Building ire Connector, Solid ire Modular Switch 120V MCS120STR Black, Black, reen Building ire Connector, Stranded ire Modular Switch 277V MCS277SOL* Black, Black, reen Building ire Connector, Solid ire Modular Switch 277V MCS277STR* Black, Black, reen Building ire Connector, Stranded ire Patent Pending For ordering devices, include Cat. No. followed by the color code: B (Brown), BK (Black), Y (ray), LA (Light Almond), RD (Red), V (Ivory), (hite) * For custom 277V lead color combinations, include Cat. No. followed by 3 color code indicators, one for each lead, in the Line (LI)/Load (LO)/round ( ) sequence: B (Brown), E (reen), (ray), K (Black), L (Blue), N (Orange), P (Pink), R (Red), Y (Yellow); ex. Switch AH1221VMYBE or Connector MCS277SOLYBE ( Y Yellow, B Brown, E reen) ** Lead color sequences other than Black/Black/reen for switches or connectors will add 2 days to the lead times on page 7 C US (enlarged) 0.52" (13.2mm) Switch Connector Switch Plug 1.03" (26.2mm) 1.03" (26.2mm) Lead Length: 6.00 (152.4mm) 0.52" (13.2mm) For Specification & Performance Data, see page 27. TESTIN & CODE COMPLIANCE Base Device: culus Listed to UL20, file no. E18704, except AH1221: UL Listed; UL verified to Federal Spec. S-896; NOM Certified : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E MATERIAL CHARACTERISTICS & thermoset with adhesive terminal barrier Base Device: ; temperature rating: -20ºC to 65ºC (-4ºF to 149ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. 25

26 R R R Modular Switches Commercial rade Decorator Switches AC Quiet Switches 15A 120/277V/AC 20A 120/277V/AC 3.81" (96.8mm) 7621_M 1.44" (36.5mm) 2.60" (66.0mm) 1.69" (42.9mm) Commercial rade AC Quiet Decorator Switches FEATURES modular plug and connector provide high quality circuit connections and incorporate a first make/last break grounding design. ire leads are crimped and resistance welded to plug and connector terminals for maximum durability. Audible click when mating plug and connector indicates proper assembly during final device installation. Pre-wired plugs provide 100% inspected and consistent torque settings for reliable connections to base devices. Connectors shipped with re-usable protective covering that allows circuit testing while protecting the connection from foreign matter. Exclusive screw terminal guards provide a protective barrier from conductive surfaces. elded construction provides superior assembly security under heavy use. One-piece color-coded wrap-around mounting straps assure ground integrity and provide a quick visual amperage indicator for durable, safe and reliable installations. Smooth face for ease of cleaning. 277V versions available with different lead color combinations for local color coding requirements (standard lead colors are black, black, and green for Line (LI)/Load (LO)/round ( ) sequence). Lead Color Configuration (enlarged) Commercial rade - Back and Side ire C Switch Rating Catalog No. Available A V/AC Description Switch Colors /277 Modular Single Pole Decorator Switch 7601 M* A, B, BK, Y, LA, V, /277 Modular Single Pole Decorator Switch 7621 M* A, B, BK, Y, LA, RD, V, Modular Single Pole Lighted 7631 M* A, LA, V, Decorator Switch US F S AVAILABLE Q2 2009! 0.52" (13.2mm) Switch Connector Switch Plug 1.03" (26.2mm) 1.03" (26.2mm) Lead Length: 6.00 (152.4mm) 0.52" (13.2mm) For Specification & Performance Data, see page 27. Switch Connectors C US Description Catalog No. Lead Color Sequence (Line/Load/round) Modular Switch 120V MCS120SOL Black, Black, reen Building ire Connector, Solid ire Modular Switch 120V MCS120STR Black, Black, reen Building ire Connector, Stranded ire Modular Switch 277V MCS277SOL* Black, Black, reen Building ire Connector, Solid ire Modular Switch 277V MCS277STR* Black, Black, reen Building ire Connector, Stranded ire Patent Pending For ordering, include Cat. No. followed by the color code: A (Almond), B (Brown), BK (Black), Y (ray), LA (Light Almond), RD (Red), V (Ivory), (hite) * For custom 277V lead color combinations, include Cat. No. followed by 3 color code indicators, one for each lead, in the Line (LI)/Load (LO)/round ( ) sequence: B (Brown), E (reen), (ray), K (Black), L (Blue), N (Orange), P (Pink), R (Red), Y (Yellow); ex. Switch AH1221VMYBE or Connector MCS277SOLYBE ( Y Yellow, B Brown, E reen) ** Lead color sequences other than Black/Black/reen for switches or connectors will add 2 days to the lead times on page 7 TESTIN & CODE COMPLIANCE Base Device: culus Listed to UL20, file no. E18704; UL verified to Federal Spec. S-896 : Plug & connector culus Listed to UL2459 file no. E Combined: culus Listed wiring assembly, UL file no. E MATERIAL CHARACTERISTICS with adhesive terminal barrier Base Device: Flammability meets UL 94 requirements; V0 rated; temperature rating: -20ºC to 60ºC (-4ºF to 140ºF) : ; temperature rating: -20ºC to 90ºC (-4ºF to 194ºF) max. 26