ZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm

Size: px

Start display at page:

Download "ZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm"

Aubrey Wood
5 years ago
Views:

1 Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by the standard JST.0mm (.079") pitch connector. Housing lances The contact retention lances on the resilient housing allow visual confirmation of contact lock-in for easy and secure insertion. Reliable contact construction The dimple at the center of the contact ensures positive contact and low contact resistance at all times, even when the connector is subjected to vibration or distortion. Therefore this connector is ideal for use under low current, low voltage conditions. The ZH connector is very small with a mounting height of 5.6mm (.0") and a thickness of only 3.5mm (.138"). Contact retention lances on the housing make insertion easier, while the dimple at the center of the contact ensures reliable contact with the post. Distortion resistant construction The header is fully shrouded and thus protects the receptacle from damage that could be caused by mating the connectors at an angle or by otherwise mismating the connectors. Compatible with the ZR insulation displacement connectors The same shrouded header can be used for either the ZR IDCstyle connector or the ZH crimp style connector. This allows both s of connector to be used interchangeably without replacing the header. 14 Specifications Current rating: 1.0A AC, DC (AWG #6) Voltage rating: 50V AC, DC Temperature range: -5 C to +85 C (including temperature rise in applying electrical current) Contact resistance: Initial value/0m Ω max. After environmental testing/30m Ω max. Insulation resistance: 500M Ω min. Withstanding voltage: 500V AC/minute Applicable wire: AWG #3 to #6 Applicable PC board thickness: 0.6 to 1.mm(.04" to.047"), 1.6mm(.063") * Contact JST for details. Standards 0Recognized E Certified LR081 R935109

2 Contact 4.0(.157) (.047)(.039) 1.4 (.055) 1.1(.043) SZH-00T-P0.5 SZH-003T-P0.5 Applicable wire mm AWG # Insulation O.D. mm(in.) 0.08 to to to 1.1(.031 to.043) 0.03 to to to 0.9(.00 to.035) Phosphor bronze, tin-plated Q'ty / reel 13,000 16, (.01) Housing 1 B A (.134) 4.(.165) 0.3(.01) 0.3(.01) ZHR- ZHR- 3 ZHR- 4 ZHR- 5 ZHR- 6 ZHR- 7 ZHR- 8 ZHR- 9 ZHR-10 ZHR-11 ZHR-1 ZHR-13 Dimensions mm(in.) A B 3.0(.118) 19.5(.768) 1.0(.87) Q ty / bag Material Nylon 66, UL94V-0, natural (white) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. ZHR--oo- (blank) natural (white) K black R red E blue M green 15

3 Through-hole shrouded header The shrouded headers are interchangeable with those of the ZR insulation displacement connectors. Top entry Dimensions mm(in.) Q'ty / box Note 3) Note 3) Top Side Top entry Side entry ( circuits) entry entry 3.5 (3 circuits or more) Top entry Side entry A B B (.138) B 3.5(.138) B B-ZR S B-ZR B B-ZR-3.4 S B-ZR-3.4,000,000 3 B 3B-ZR S 3B-ZR B 3B-ZR-3.4 S 3B-ZR (.118),000,000 4 B 4B-ZR S 4B-ZR B 4B-ZR-3.4 S 4B-ZR-3.4,000,000 5 B 5B-ZR S 5B-ZR B 5B-ZR-3.4 S 5B-ZR-3.4,000 6 B 6B-ZR S 6B-ZR B 6B-ZR-3.4 S 6B-ZR-3.4, B 7B-ZR S 7B-ZR B 7B-ZR-3.4 S 7B-ZR (.00)dia.. (.087) A (.087) 8 B 8B-ZR S 8B-ZR B 8B-ZR-3.4 S 8B-ZR B 9B-ZR S 9B-ZR B 9B-ZR-3.4 S 9B-ZR-3.4 A 10 B10B-ZR S10B-ZR B10B-ZR-3.4 S10B-ZR-3.4 B 11 B11B-ZR S11B-ZR B11B-ZR-3.4 S11B-ZR B1B-ZR S1B-ZR B1B-ZR-3.4 S1B-ZR (.768) B13B-ZR S13B-ZR B13B-ZR-3.4 S13B-ZR (.87) (.106) JST 0.5 (.00)dia. A.4(.094) (.181) (.055) (.106) (.106) Pin: Brass, copper-undercoated, tin/lead-plated Wafer: Glass-filled nylon 66, UL94V-0, natural (ivory) Note: 3. Headers with 3.4mm(.134") long solder tails, suited for the 1.6mm(.063") thick PC board. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. BB-ZR-3.4-oo- (blank) natural (ivory) K black R red E blue M green Through-hole PC board layout (viewed from soldering side) and Assembly layout Top entry ±0.05 (.059±.00 ) min. 3.5 (.138) ±0.05 (.059±.00 ) min. 7.1(.80). (.087)min. 0.7±0.03 (.08±.001 )dia. (.106) 5.6(.0) 4.6(.181) 0.7±0.03 (.08±.001 )dia. 4.6 (.181) (.106) Note: 1. Tolerances are non-cumulative: ±0.05mm(±.00" ) for all centers.. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 16

4 SMT shrouded header SM B 5.0(.197) A 1.0(.039) (with solder tabs) Top entry B 5.0(.197) A.5(.089) JST 1.0(.039)dia. 0.9 (.035) B 5.0(.197) A.5(.089) 1.0(.039) SM Dimensions mm(in.) A B Q'ty / reel Dimensions mm(in.) Top entry A B Top entry Q'ty / reel Side entry S B-ZR-SM-TF S 3B-ZR-SM-TF S 4B-ZR-SM-TF S 5B-ZR-SM-TF S 6B-ZR-SM-TF S 7B-ZR-SM-TF S 8B-ZR-SM-TF S 9B-ZR-SM-TF S10B-ZR-SM-TF S11B-ZR-SM-TF S1B-ZR-SM-TF S13B-ZR-SM-TF 3.0(.118) 19.5(.768) 1.0(.87) B B-ZR-SM3-TF B 3B-ZR-SM3-TF B 4B-ZR-SM3-TF B 5B-ZR-SM3-TF B 6B-ZR-SM3-TF B 7B-ZR-SM3-TF B 8B-ZR-SM3-TF B 9B-ZR-SM3-TF B10B-ZR-SM3-TF B11B-ZR-SM3-TF B1B-ZR-SM3-TF B13B-ZR-SM3-TF S B-ZR-SM3A-TF S 3B-ZR-SM3A-TF S 4B-ZR-SM3A-TF S 5B-ZR-SM3A-TF S 6B-ZR-SM3A-TF S 7B-ZR-SM3A-TF S 8B-ZR-SM3A-TF S 9B-ZR-SM3A-TF S10B-ZR-SM3A-TF S11B-ZR-SM3A-TF S1B-ZR-SM3A-TF S13B-ZR-SM3A-TF 3.0(.118) 19.5(.768) 1.0(.87).5(.886) Note: 1. The products listed above are supplied on embossed-tape.. Contact JST for the top entry headers with suction cap. <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. SB-ZR-SM3A-oo-TF- (blank) natural (white) K black R red E blue M green Pin: Brass, copper-undercoated, tin/lead-plated Wafer: Glass-filled nylon 46, UL94V-0, natural (white) Solder tab: Brass, copper-undercoated, tin/lead-plated 17

5 SMT PC board layout (viewed from component side) SM ( )dia. x (No.of circuits - 1) [.059 x (No.of circuits - 1) +.071] ± ± (.08) (.059 ±.00) (.035 ±.00).0 (.079)min..5 (.098)max. Top entry ±0.05 (.059±.00) 1.3±0.1 (.051±.004) 0.7 (.08)min. ±0.1 (.059±.004) 0.6(.04).3±0.1 (.091±.004).0 (.079) ± ± ±0.1 (.059±.00) (.055±.004) (.043±.004) 0.7 (.08)min. 1.9±0.1 (.075±.004) 1.4±0.1 (.055±.004) 4.3 (.169) Note: 1. Tolerances are non-cumulative: ±0.05mm(±.00" ) for all centers.. The dimensions above should serve as a guideline. Contact JST for details. 18

6 Taping specifications [13.0(.51)dia.] W (W ) 330 ±.0(1.99 ±.079)dia..0 ± 0.5 (.079 ±.00) Tail tape (Unloaded area) 40.0(75)min. Connector loaded area leader area (5.906)min. Lead tape (Unloaded area) 0 vacancies min. SM () to 11 circuits () to 10 circuits SM () 1 to 13 circuits () 11 to 13 circuits 5±0.05 (.061±.00)dia..0±0.1 (S) (.004) 5±0.05 (.061±.00)dia..0±0.1 (.004) S±0.1(.004) 1.0 ±0.1 (.47 ±.004) 1.0 ±0.1 (.47 ±.004) (Top entry ) to 10 circuits (Top entry ) 11 to 1 circuits 5±0.05 (.061±.00)dia..0±0.1 5±0.05 (.061±.00)dia..0± ±0.1 (.47 ±.004) (.004) (S) 1.0±0.1 (.47±.004) (.004) S±0.1(.004) Side SM entry Type Top entry SM3 Type Side entry to 6 7 to 11 1 to 13 3 to 5 6 to to 1 to 5 6 to to 1 13 Reel dimensions Taping dimensions mm(in.) mm(in.) Q'ty / reel F S W W1 1(.453) 14.(.559) 5.5(.17) 1(.453) 14.(.559) 1(.453) 14.(.559) 0.(.795) 6.75(.66) 10.75(.43) 8.4(1.118) 4.75(.187) 6.75(.66) 10.75(.43) 8.4(1.118) 6.75(.66) 10.75(.43) 8.4(1.118) 40.4(91) 16.0(.630) 4.0(.945) 3.0(1.60) 1.0(.47) 16.0(.630) 4.0(.945) 3.0(1.60) 16.0(.630) 4.0(.945) 3.0(1.60) 44.0(1.73) 17.5(.689) 5.5(1.004) 33.5(1.319) 13.5(.531) 17.5(.689) 5.5(1.004) 33.5(1.319) 17.5(.689) 5.5(1.004) 33.5(1.319) 45.5(1.791) Note: 1. Specifications conform to JIS C The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded.. Specifications are subject to change without prior notice. 19

7 Applicator for the semi-automatic press AP-KN Contact Crimp applicator MKS-L Compact crimp applicator MKS-LS Strip-crimp applicator MKS-SC with safety cover without safety cover with safety cover without safety cover with safety cover SZH-00T-P0.5 APLMK SZH00-05 APLNC SZH00-05 APLSC SZH00-05 SZH-003T-P0.5 APLMK SZH APLNC SZH APLSC SZH

ZH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm

ZH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm Crimp mm (.0") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Ultracompact, low profile design The ZH connector requires only about % of the installation space required by