SUBRACKS. A minimum of components a multitude of applications

Transcription

1 SURCKS

2 minimum of components a multitude of applications SURCKS he modular concept of Ripac subracks facilitates a wide range of application options with a minimum of components. ll Ripac subracks are based on the same horizontal rails and system components. he difference lies in the design of the side panels and installation options. he subracks are shock and vibration-tested and comply with IEC , -102, Ripac ESY Easy handling due to pre-assembled screws. ll rails are double screw fastened and ensure ruggedness even under high mechanical stress. RIPC Vario/Vario EMC Ripac Vario Mobile Ripac Compact wide range of sizes and accessories facilitate complex applications. Variable depth system installation due to 10 - pitch pattern of holes. EMC-shielding by horizontal and vertical EMC gaskets. lso upgradable (for Ripac Vario). operation in German Railways. he test had been carried out according to Standard EN , 1996 (electronic devices in rail vehicles).he setup of the certified subracks corresponds to IEC 8D. according to IEC , test Fc IEC , test Ea Subracks for mounting on mounting s or top hat rails. ENEFIS GLNCE Subracks Ripac ECO connector installation ELECRONIC PCKGING SYSEMS

3 SURCKS OVERVIEW Ripac ESY Ripac ECO Ripac Vario For standard applications or high mechanical requirements see page 90 pplications: Subrack system for standard applications or high mechanical loads. In cases that require easy handling and fast assembly. Suitable for installation of standardized PCs or plugin units up to 00 depth. echnical specifications: 82.6 (19 ) subrack according to IEC and 6 U For board depths: 160, 220, 280, 30, 00 Fast and easy assembly due to pre-assembled screws and longitudinal holes in the side panels op covers easily retractable Horizontal rails with double screwed joint Material: aluminum, noncorrosive 60 mounting grids for horizontal rails Rear horizontal rails with integrated contact surface Rear equipment for installation of backplanes or connectors Separate 19 flanges enefits at a glance Fast and easy handling by pre-assembled screws op covers retractable Horizontal rails with integrated contact surface (no need for insulating strips) Double screw joints of horizontal rails ensure stability even for high loads For standard applications see page 91 pplications: Subrack system for standard applications. Suitable for installation of standardized PCs or plug-in units of 160 and 220 depth. echnical specifications: 82.6 (19 ) subrack according to DIN 1 9, part 5/ IEC and 6 U For board depths: 160 and 220 Side panels of sheet steel, zinc-d Pre-configured assembly points for horizontal rails Rear installation for backplanes, optionally for connectors Separate 19 flanges enefits at a glance Fast and easy handling Low-cost version Upgradable for assembly of backplanes or connectors For standard applications or complex installations. see pages pplications: Subrack system for standard applications or complex installations. Suitable for installation of standardized PCs or plug-in units up to 00 depth. echnical specifications: 82.6 (19 ) subrack according to IEC ,, 6, and 9 U For board depths up to 00 Side panels of aluminum, clearchromated 10 mounting grids for horizontal rails Rear equipment for installation of backplanes or connectors Separate 19 flanges enefits at a glance Side panels with 10 mounting grid Upgradeable to EMC 19 flanges optionally for front/rear mounting Wide range of standard sizes For installation of backplanes or connectors road range of accessories

4 SURCKS OVERVIEW Ripac Vario EMC Ripac Compact Ripac Vario Mobile For EMC applications and complex installations see pages 9-95 pplications: Subrack system for EMC applications or complex installations. Suitable for installation of standardized PCs or plug-in units up to 00 depth. echnical specifications: 82.6 (19 ) EMC subrack according to IEC ,, 6, and 9 U For board depths up to 00 Side panels of aluminum, clearchromated 10 mounting grids for horizontal rails Rear equipment for installation of backplanes or connectors Separate 19 flanges Including EMC gaskets enefits at a glance: EMC version Side panels with 10 mounting grids for variable system assembly 19 flanges optionally for front/rear mounting Many standard sizes For mounting backplanes or connectors road range of accessories For mounting s or top hat rails see page 96 pplications: Subrack system for direct mounting in a cabinet. either on top hat rails or on mounting. Suitable for installation of standardized PCs or plug-in units. echnical specifications: Subrack according to IEC Pre-installed for mounting on top hat rails or directly on the mounting 3 and 6 U For board depths up to 160 Installation width: 21 and 2 Side panels of aluminum, clearchromated Rear equipment for installation of backplanes enefits at a glance: Direct mounting on a mounting or a top hat rail Variable cable entry from bottom/top Side panels with 10 mounting grids for variable system assembly Suitable for mounting backplanes Optionally in EMC version For mobile applications see page 9 pplications: Subrack system for applications in rail vehicles. Suitable for installation of standardized PCs or plug-in units. echnical specifications: 82.6 (19 ) subrack according to IEC esting conducted in accordance with standard EN , 1996 (electronic equipment in rail vehicles) 3 and 6 U For board depths up to 220 Side panels of aluminum, clearchromated Rear equipment for installation of backplanes or connectors Fully assembled enefits at a glance Suitable for installation in rail vehicles Optionally as EMC version Side panels with 10 mounting grids for variable system assembly Fully assembled For mounting backplanes or connectors HEIEC ELECRONIC PCKGING SYSEMS

5 SURCKS Ripac ESY Ripac ESY 3 U, 6 U, luminum 2 aluminum, und Horizontal rails: extruded aluminum section, noncorrosive Flanges: pre-anodized Side panels, flanges, horizontal rails, tapped strips, assembly screws Shock- and vibration tested to: IEC test Ea Ripac subracks are based on the system dimensions of IEC Note: ackplanes can be mounted directly on the rear horizontal rails. Isolating strips are not necessary C C C5 C C D1 C C5 D2 C5 1 2 ottom: for connector ottom: for connector U () (19 ) 8 ccessories Side panel () PC depth For backplane For connector IEC For backplane For connector IEC Covers 125 Horizontal rails 100 Guide rails 119 Page

6 SURCKS Ripac ECO Ripac ECO 3 U, 6 U, sheet steel 1.5 sheet steel, zinc-d Flanges/horizontal rails: Extruded aluminum section, clear-chromated Side panels, flanges, horizontal rails, threaded inserts, assembly screws. IEC test Ea Ripac subracks are based on the system dimensions of DIN 1 9 part 5 and IEC For backplane 2 For backplane U () (19 ) 8 ccessories Side panel () PC depth For backplane For backplane Covers 125 Horizontal rails 100 Guide rails 119 Page ELECRONIC PCKGING SYSEMS

7 SURCKS Ripac VRIO Ripac Vario 3 U, 6 U, 9 U aluminum, clear-chromated flanges and horizontal rails: Extruded aluminum section, clear-chromated Flanges, side panels, horizontal rails, threaded inserts, insulating strips or Z rails. IEC test Ea Ripac subracks are based on the system dimensions of IEC upgradeable ottom: for connector ottom: for connector ottom: for connector D2 D2 D2 U Height () (19 ) 8 Side panel () PC depth 3 For backplane For connector For backplane For connector For backplane For connector IEC IEC IEC

8 SURCKS Ripac VRIO Ripac Vario U, U 2.5 aluminum, clear-chromated Flanges and horizontal rails: Extruded aluminum section, clear-chromated Flanges, side panels, horizontal rails, threaded inserts, insulating strips or Z rails. IEC test Ea Ripac subracks are based on the system dimensions of IEC H 2 upgradeable ottom: for connector ottom: for connector (6 U + 1 U) ottom: for backplane (6 U + 2 x 1/2 U) U ( + ) 82.6 (19 ) 8 Side panel () (3 + 1) (3 + 1) (3 + 2 x 1 / 2) 3 (3 + 2 x 1 / 2) (6 + 1) (6 + 2 x 1 / 2) PC depth For backplane For connector For backplane For connector For backplane For backplane IEC IEC ELECRONIC PCKGING SYSEMS

9 SURCKS Ripac VRIO EMC Ripac Vario EMC 3 U, 6 U, 9 U 2.5 aluminum, clear-chromated Flanges and horizontal rails: Extruded aluminum section, clear-chromated Covers: luminum, und Flanges, rear trim, side panels, EMC gaskets, covers, mounting blocks, horizontal rails, insulating strips. IEC test Ea Ripac subracks are based on the system dimensions of IEC ottom: for backplane/ 10 extension ottom: for backplane/ 10 extension 3 ottom: for backplane/ 10 extension U Height () (19 ) 8 Side panel () PC depth For backplane For backplane1) For backplane For backplane1) For backplane For backplane1) ) Front horizontal rails with 10 extension for injector/extractor handles (). 3

10 SURCKS Ripac VRIO EMC Ripac Vario EMC U, U 2.5 aluminum, clear-chromated Flanges and horizontal rails: Extruded aluminum section, clear-chromated Covers: luminum, und Flanges, rear trims, side panels, EMC gaskets, covers, mounting blocks, horizontal rails, threaded inserts, insulating strips. IEC test Ea Ripac subracks are based on the system dimensions of IEC H 2 Please contact us! Phone: eps-quote@heitec.de ge 1 U ( + ) 82.6 (19 ) 8 Side panel () PC depth (3 + 1) (3 + 1) (3 + 2 x 1 / 2) (3 + 2 x 1 / 2) (6 + 1) (6 + 1) (6 + 2 x 1 / 2) (6 + 2 x 1 / 2) For For For For For For For For backplane backplane1) backplane backplane1) backplane backplane1) backplane backplane1) ) Front horizontal rails with 10 extension for injector/extractor handles (). 3 bottom: for backplane/ 10 extension bottom: for backplane/ 10 extension bottom: for backplane/ 10 extension bottom: for backplane/ 10 extension 3 ELECRONIC PCKGING SYSEMS

11 SURCKS Ripac COMPC Ripac Compact 3 U, 6 U E E E aluminum, clear-chromated Flanges and horizontal rails: Extruded aluminum section, clear-chromated Side panels, rear trims, flanges for mounting s or top-hat rail adaptors, EMC front/rear panels, EMC gaskets, covers, horizontal rails, threaded inserts, insulating strips. IEC test Ea Ripac subracks are based on the system dimensions of IEC E 5 E Ripac Compact 3 U for top-hat rail 6 E Ripac Compact 3 U for mounting HE = U E = 1 2 op: for top-hat rail ottom: for mounting 3 For mounting 5 op: EMC for top-hat rail ottom: EMC for mounting 6 EMC for mounting EMC U Height () ttachment Side panel () PC depth op-hat rail op-hat rail For backplane op-hat rail op-hat rail