NuMicro Family NuTiny-SDK-Nano112 User Manual

Size: px

Start display at page:

Download "NuMicro Family NuTiny-SDK-Nano112 User Manual"

Diane Simpson
5 years ago
Views:

1 ARM Cortex -M0 -bit Microcontroller NuMicro Family NuTiny-SDK- User Manual The information described in this document is the exclusive intellectual property of Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton. Nuvoton is providing this document only for reference purposes of NuMicro microcontroller based system design. Nuvoton assumes no responsibility for errors or omissions. All data and specifications are subject to change without notice. For additional information or questions, please contact: Nuvoton Technology Corporation. Jul 0, 0 Page of Rev.00

2 Table of Contents Overview... Introduction to NUTINY-SDK-.... NuTiny-SDK- System..... Power Settings..... Debug Connectors..... ICE USB Connector..... Extended Connectors..... Buttons..... Power Connectors..... TNLCD Panel.... Pin Assignment for Extended Connectors.... NuTiny-SDK- PCB Placement... Starting to Use NuTiny-SDK- on the Keil uvision IDE.... Downloading and Installing Keil μvision IDE Software.... Downloading and Installing Nuvoton Nu-Link Driver.... Hardware Setup.... Example Program... Starting to Use NuTiny-SDK- on the IAR Embedded Workbench Downloading and Installing IAR Embedded Workbench Software Downloading and Installing Nuvoton Nu-Link Driver Hardware Setup Example Program... 0 Downloading NuMicro Related Files from Nuvoton Website.... Downloading NuMicro Keil μvision IDE Driver.... Downloading NuMicro IAR EWARM Driver.... Downloading NuMicro Nano0/ Series BSP Software Library... NuTiny-SDK- Schematics.... Nu-Link-Me Schematic.... NuTiny-EVB- Schematic.... GPIO for 00 Pin Schematic NuTiny-EVB-TNLCD- Schematic... REVISION HISTORY... Jul 0, 0 Page of Rev.00

OVERVIEW The NuTiny-SDK- is a specific development tool for NuMicro Nano0/ series. With the NuTiny-SDK-, users can develop and verify the application program easily.

3 OVERVIEW The NuTiny-SDK- is a specific development tool for NuMicro Nano0/ series. With the NuTiny-SDK-, users can develop and verify the application program easily. The NuTiny-SDK- includes two portions - NuTiny-EVB- and Nu-Link-Me. The NuTiny-EVB- is an evaluation board and the Nu-Link-Me is its debug adaptor. Thus, users do not need other additional ICE or debug equipment. INTRODUCTION TO NUTINY-SDK-NANO The NuTiny-SDK- uses the VCAN as the target microcontroller (MCU). Figure - shows the NuTiny-SDK- board for the Nano0/ series. The left portion is called NuTiny-EVB- and the right portion is a debug adaptor called Nu-Link-Me. The NuTiny-EVB- is similar to other development boards. It can be used as a real system controller to design user target systems and develop and verify applications to emulate the real behavior. The on-board chip covers the Nano0/ features. The Nu-Link-Me is a Debug Adaptor, which connects the USB port of a computer to a target system (via Serial Wired Debug port) for users to program and debug embedded programs on the target hardware. To use the Nu-Link-Me Debug Adaptor with IAR or Keil, please refer to the Nuvoton NuMicro IAR ICE Driver User Manual or Nuvoton NuMicro Keil ICE Driver User Manual for details. The two documents will be stored in the local hard disk when each driver is installed. Additionally, the TNLCD panel, another portion of NuTiny-SDK-, can provide x COM/SEG LCD display function. With the TNLCD panel, user can implement LCD driver function of easily. I/O LED Extended Connector (JP JP) TP(DVDD) TP(LDO_CAP) TP(VREF) TP(TICE_RST) INT0 (SW) VDD (JP) TNLCD Panel GND (JP) ICE Controller USB Connector (ICEJ) Reset Key (SW) Extended Connector (JP JP) ICE Controller Figure - NuTiny-SDK- (PCB Board) Jul 0, 0 Page of Rev.00

4 . NuTiny-SDK- System.. Power Settings ICEJ: The USB port on the Nu-Link-Me JP: The VCC voltage connecter on the NuTiny-EVB- Model ICEJ USB port JP VDD MCU Voltage Model Connect to PC DC.V output DC.V Model X DC. V -. V Input Voltage by JP input.. Debug Connectors JP: The connector on the target board (NuTiny-EVB-) for connecting with Nuvoton ICE adaptor (Nu-Link-Me) ICEJP: The connector on the ICE adaptor (Nu-Link-Me) for connecting with a target board (e.g., NuTiny-EVB-).. ICE USB Connector ICEJ: The Mini USB Connector in Nu-Link-Me connected to a PC USB port.. Extended Connectors JP, JP, JP and JP: Show all pins in NuTiny-EVB- TP: Show LDO_CAP pin in VCAN TP: Show Reset pin in VCAN TP: Show DVDD pin in VCAN TP: Show V REF pin in VCAN.. Buttons SW: Reset button in NuTiny-EVB- SW: INT0 button in NuTiny-EVB-.. Power Connectors JP:. VCC connector in NuTiny-EVB- JP: GND connector in NuTiny-EVB-.. TNLCD Panel Provides x COM/SEG C-type LCD display Jul 0, 0 Page of Rev.00

5 . Pin Assignment for Extended Connectors The NuTiny-EVB- provides VCAN on board and the extended connectors for LQFP00 pins. Table - shows the pin assignment for VCAN. Pin No Pin Function Pin No Pin Function PB./SC0_CD/UART_CTSn/LCD_ SEG nreset PB./INT/TMR0_CNT/PWM0_CH0/ SNOOPER/LCD_SEG/TMR0_OU LDO_CAP T PB./PWM0_CH/LCD_SEG V DD PE./PWM0_CH/LCD_SEG0 PF.0/TMR_CNT/TMR_OUT/X_IN PE./PWM0_CH/LCD_SEG PF./TMR_CNT/TMR_OUT/X_OUT PB.0/SPI0_MOSI/UART_RXD/L CD_SEG VSS_PLL PB./TMR_CNT/SPI0_MISO/UA RT_RTSn/LCD_SEG/TMR_OU V SS T PB./FCLK0/TMR0_CNT/SPI0_MO SI0/UART0_RTSn/LCD_SEG/TM V SS R0_OUT PB./SPI0_MISO0/UART0_RXD/L CD_SEG PF./INT/TC/UART_RXD/XT_IN 0 PB./SPI0_CLK/UART0_TXD/LCD _SEG 0 PF./INT0/TC/UART_TXD/XT_OUT NC NC PB./SPI0_SS0/UART0_CTSn/LC D_SEG PE.0/SPI0_MOSI0 PC.0/PWM0_CH0/IC0_SCL/SPI0_ SS/LCD_SEG PE./SPI0_MISO0 PC./PWM0_CH/IC0_SDA/LCD_ SEG PE./SPI0_CLK PC./PWM0_CH/IC_SCL/LCD_S EG0 PE./SPI0_SS0 PC./PWM0_CH/IC_SDA/LCD_ SEG PE./SC_RST PC./INT0/SC0_CLK/UART_CTSn/ LCD_SEG PE./SC_PWR PC./SC0_CD/LCD_SEG PE./SC_CLK PC./SC0_DAT/UART_RTSn/LCD_ SEG PE./SC_DAT 0 PC./SC0_PWR/UART_RXD/LCD_ SEG 0 AV SS PC./SC0_RST/UART_TXD/LCD_ SEG AV SS PC./LCD_SEG PA.0/AD0 V DD PA./AD/ACMP0_P/ACMP0_CHDIS V SS PA./INT0/AD/ACMP0_P/SC0_CLK/ACMP0 _CHDIS V SS PA./INT/AD/ACMP0_P/SC0_DAT/ACMP0 _CHDIS PC.0/SC_CD/IC_SCL/LCD_SE PA./AD/ACMP0_P0/SC0_CD/ACMP0_CHDI G S PC./SC_PWR/IC_SDA/LCD_S PA./AD/ACMP0_N/SC0_PWR/IC_SDA/SP Jul 0, 0 Page of Rev.00

6 EG I_SS0/ACMP0_CHDIS PC./SC_CLK/LCD_SEG0 PA./AD/ACMP0_OUT/SC0_RST/ACMP0_C HDIS PC./SC_DAT/LCD_SEG PA./AD/SC_CD 0 PC./SC_CD/LCD_SEG 0 V REF PC./SC_PWR/LCD_SEG AV DD PD.0/LCD_SEG PF./FCLK/TC/PWM0_CH/CLK_Hz/ICE_C PD./LCD_SEG LK PF./TC0/PWM0_CH/ACMP0_CHDIS/ICE_D AT PD./LCD_SEG PA./SC0_PWR PD./LCD_SEG PA./SC0_RST PD./SC_RST/LCD_SEG PA.0/SC0_CLK PD./LCD_SEG PA./STADC/SC0_DAT PD./LCD_SEG0 PA./ACMP_P/IC0_SCL/SPI_MOSI0/UAR T0_TXD PD./SC_CLK/LCD_COM PA./ACMP_N/IC0_SDA/SPI_MISO0/UA RT0_RXD 0 PD./SC_DAT/LCD_COM 0 PA./IC_SCL/SPI_CLK/ACMP0_CHDIS PD./PWM0_CH/SC_RST/LCD_C PA./TC/ACMP_OUT/IC_SDA/SPI_SS OM 0 PD.0/TC/PWM0_CH/LCD_COM0 PB.0/FCLK/UART0_TXD PD./TC0/PWM0_CH/LCD_DH PB./INT/TC/UART0_RXD PD./FCLK0/TMR_CNT/PWM0_C PB./TMR_CNT/IC0_SCL/SPI_MOSI/UA H0/LCD_DH/CLK_Hz/TMR_OUT RT0_RTSn/TMR_OUT NC PB./TMR_CNT/IC0_SDA/SPI_MISO/UA RT0_CTSn/TMR_OUT VLCD V DD NC V SS PD./INT/LCD_V PB./SPI_MISO/UART_RTSn PD./LCD_V PB./SPI_MOSI/UART_RXD/LCD_SEG 0 PD./LCD_V 00 Table - Pin Assignment for VCAN PB./FCLK0/SPI_SS/UART_TXD/LCD_SE G Jul 0, 0 Page of Rev.00

7 . NuTiny-SDK- PCB Placement Figure - and Figure - show the NuTiny-SDK- and NuTiny-SDK--TNLCD PCB placement. Figure - NuTiny-SDK- PCB Placement Figure - NuTiny-SDK--TNLCD PCB Placement Jul 0, 0 Page of Rev.00

8 STARTING TO USE NUTINY-SDK-NANO ON THE KEIL UVISION IDE.. Downloading and Installing Keil μvision IDE Software Please connect to the Keil company website ( to download the Keil μvision IDE and install the RVMDK. Downloading and Installing Nuvoton Nu-Link Driver Please connect to Nuvoton NuMicro website ( to download the NuMicro Keil μvision IDE driver file. Please refer to section. for the detailed download flow. After the Nu-Link driver is downloaded, please unzip the file and execute the Nu- Link_Keil_Driver.exe to install the driver.. Hardware Setup The hardware setup is shown in Figure -. Figure - NuTiny-SDK- Hardware Setup. Example Program This example demonstrates the ease of downloading and debugging an application on a NuTiny- SDK- board. It can be found on Figure - list directory and downloaded from Nuvoton NuMicro website. The example file can be found in the directory list shown in the following figure. Jul 0, 0 Page of Rev.00

Directory & Project File To use this example: Figure - Keil Example Directory and Project File The word and NUVOTON will be displayed on TNLCD panel of NuTiny-SDK-.

9 Directory & Project File To use this example: Figure - Keil Example Directory and Project File The word and NUVOTON will be displayed on TNLCD panel of NuTiny-SDK-. Start μvision Project Open Open the led.uvproj project file Start Debug mode When using the debugger commands, you may: Project Build Compile and link the LED application Review variables in the watch window Single step through code Flash Download Program the application code into onchip Flash ROM Reset the device Run the application Jul 0, 0 Page of Rev.00

STARTING TO USE NUTINY-SDK-NANO ON THE IAR EMBEDDED WORKBENCH.. Downloading and Installing IAR Embedded Workbench Software Please connect to IAR company website (http://www.iar.

10 STARTING TO USE NUTINY-SDK-NANO ON THE IAR EMBEDDED WORKBENCH.. Downloading and Installing IAR Embedded Workbench Software Please connect to IAR company website ( to download the IAR Embedded Workbench and install the EWARM. Downloading and Installing Nuvoton Nu-Link Driver Please connect to Nuvoton NuMicro website ( to download the NuMicro IAR EWARM Driver file. Please refer to section. for the detailed download flow. After the Nu-Link driver is downloaded, please unzip the file and execute the Nu- Link_IAR_Driver.exe to install the driver.. Hardware Setup The hardware setup is shown as Figure -. Figure - NuTiny-SDK- Hardware Setup. Example Program This example demonstrates the ease of downloading and debugging an application on a NuTiny- SDK- board. It can be found on Figure - list directory and downloaded from Nuvoton NuMicro website. The example file can be found in the directory list shown in the following figure. Jul 0, 0 Page 0 of Rev.00

11 Directory & Project File To use this example: Figure - IAR Example Directory and Project File The word and NUVOTON will be displayed on TNLCD panel of NuTiny-SDK-. Start IAR Embedded Workbench File-Open-Workspace Open the led.eww workspace file Project Download and Debug Program the application code into onchip Flash ROM Project - Make Compile and link the LED application Single step through code Reset the device Run the application Jul 0, 0 Page of Rev.00

12 DOWNLOADING NUMICRO RELATED FILES FROM NUVOTON WEBSITE. Downloading NuMicro Keil μvision IDE Driver Step Visit the Nuvoton NuMicro website: -. Move to Support -. Click here to enter Tool & Software Step Jul 0, 0 Page of Rev.00

13 Click here to enter Software download page Step Click here to download Step Step Download the NuMicro Keil μvision IDE driver. Jul 0, 0 Page of Rev.00

14 . Downloading NuMicro IAR EWARM Driver Step Visit the Nuvoton NuMicro website: -. Move to Support -. Click here to enter Tool & Software Step Jul 0, 0 Page of Rev.00

15 Click here to enter Software download page Step Step Click here to download Step Download the NuMicro IAR EWARM driver. Jul 0, 0 Page of Rev.00

. Downloading NuMicro Nano0/ Series BSP Software Library Step Visit the Nuvoton NuMicro website: http://www.

16 . Downloading NuMicro Nano0/ Series BSP Software Library Step Visit the Nuvoton NuMicro website: -. Move to Support Step -. Click here to enter Tool & Software Jul 0, 0 Page of Rev.00

17 Step Click here to enter Software download page Step Download the NuMicro Nano0/ Series CMSIS BSP. Jul 0, 0 Page of Rev.00

18 0 0 VBUS VDD D- D+ PB0/RX0 PB/TX0 PB/RTS0 PB/CTS0 PC/SDO00 PC/SDI00 PC/SPCLK0 PC0/SS00 PE PB/TM PB0/SS0/TM PB/SS/TM STADC/TM0/PB PVSS VDD VSS 0 /RESET XT_In XT_Out INT/PB CPP/PC CPN/PC CPP0/PC CPN0/PC AVDD ADC/PA 0 ADC/PA ADC/PA ICE_RST M_I M_O IN GND OUT OUT ADAVSS NUTINY-SDK-NANO SCHEMATICS. Nu-Link-Me Schematic VCC VCC VCC VCC USBVBUS U RTA-.V VCC CT 0uF/0V TANT-A POWER VCC icel L00 icel L00 AVDD ADAVSS iced SSA RB00L icejp ICE_DAT ICE_CLK ICE_RST HEADER PX HEADER PX RTIDA 00K R00 DEBUG RICK 00K R00 TICE_DAT TICE_CLK TICE_RST VCC_A TICE_DAT TICE_CLK TICE_RST iced SSA RB00L ICE CONNECT IF icejp HEADER PX icejp 0 HEADER PX HEADER PX TP SIP/P icer M_O icer R00 M R00 M_I Crystal icec 0pF icex C00 MHz XTAL- icec 0pF C00 VCC VCC VCC icer icer icer 0K 0K 0K R00 R00 R00 ADC ADC ADC icer icer icer 0K 0K 0K R00 R00 R00 PA0 icer 0K R00 iceu VCC DI_DIR AVDD ADC USB_D- USB_D+ icer R00 icer R00 TP SIP/P USBVBUS icej VCC SHIELD DM SHIELD DP SHIELD NC SHIELD GND mini USB pin USB_MINI_B USBVBUS TP SIP/P icel L00 ICELED (RED) ICP ICPLED (YELLOW) YELLOW 00 RED (RED) GREEN (GREEN) ICE RED 00 IDLE RED 00 BUSY GREEN 00 icerp PR-0 PRA VCC ICELED ICPLED VCC RED GREEN icect icecb 0uF/0V 0.uF TANT-A C00 0 VDD VSS INT0/PB CPO/PB CPO0/PB XI XO ICSCL/PA ICSDA/PA0 IC0SCL/PA IC0SDA/PA RX/PB TX/PB RTS/PB CTS/PB LDO NUCSREAN PA/ADC PA/ADC PA/ADC PA/ADC PA0/ADC0 AVSS ICE_CK ICE_DAT 0 PA/PWM0 PA/PWM PA/PWM PA/PWM PC/SS0 PC/SPCLK PC0/SDI0 PC/SDO0 ADC ADC PA0 ICE_CLK ICE_DAT TICERST TICECLK RTDA 0 R00 TP SIP/P RTDA R00 VCC RRSET RTCK 00K 00K R00 R00 TICEDAT RTDA 00K R00 VCC USBVBUS icec uf C00 icecb 0.uF C00 USB_D+ USB_D- DO_DIR MCU and USB icer 0K R00 ICE_RST VCC VCC_A VCC VCC_A icec 0uF/0V TANT-A Reset Circuit VCC icecb 0.uF C00 TICEDAT iceu VCCA VCCB A B A B GND DIR SNLVCTDCUR SSOP- TICE_DAT DI_DIR TICECLK TICERST iceu VCCA VCCB A B A B GND DIR SNLVCTDCUR SSOP- TICE_CLK TICE_RST DO_DIR VCC_A icecb 0.uF C00 Title Nu-Link-Me V. Size Document Number Rev Custom ICE_LQFP.SCH V. Thursday, May, 0 Date: Sheet of Jul 0, 0 Page of Rev.00

19 ADAVSS PIN PIN PIN ADC/PA. PIN PIN ADC/PA. PIN PIN ADC/PA. PIN PIN ADC0/PA.0 PIN PIN AVSS 0 PIN0 PIN AVSS PIN PIN PE. PIN PIN PE. PIN PIN0 PE. PIN PIN PE. PIN PIN NC PE. PIN PIN PE. PIN PIN PE. PIN PIN PE.0 PIN PIN 0 PIN0 XTAL PIN XT_OUT/PF. PIN XTAL PIN XT_IN/PF. PIN PIN VSS PIN PIN0 VSS PIN PIN VSS_PLL PIN XKO PIN XO/PF. PIN XKI PIN XI/PF.0 PIN PIN VDD PIN PIN VSS LDO_CAP PIN VSS nreset ADAVSS ADAVSS. NuTiny-EVB- Schematic DVDD VDD DAVDD L L00 R 0K SW R00 TICE_RST SW C PUSH BUTTON 0uF/0V TANT-A Reset Circuit From ICE Bridge's USB Power JP TICE_DAT TICE_CLK TICE_RST 0 HEADER PX HEADER PX ICE Interface C R XTAL 0pF X C00 MHz R R00 XTAL- M R00 C XTAL 0pF C00 VCC_A VCC_A DVDD DAVDD TICE_DAT TICE_DAT TICE_CLK TICE_CLK TICE_RST TICE_RST VDD DVDD JP HEADER PX VDD C 0uF/0V TANT-A PIN CB CB PIN 0.uF.uF PIN L L00 C00 C00 PIN PIN0 PIN TICE_CLK PIN CB TICE_DAT PIN 0.uF PIN C00 PIN PIN PIN ADAVSS PIN PIN PIN0 PIN DVDD PIN PIN PIN CB PIN PIN PIN 0.uF PIN C00 PIN PIN00 PIN SW nint0 SW PUSH BUTTON U PA./ADC PA./ADC PA./ADC 0 PA./ADC VREF AVDD PF./ICE_CLK PF./ICE_DAT PA. PA. PA.0 PA. PA. 0 PA. PA. PA. PB.0 PB. PB. PB. VDD VSS PB. 00 PB./SEG PB./SEG PB./SEG PB./SEG PB./SEG PE./SEG0 PE./SEG PB.0/SEG PB./SEG PB./SEG 0 PB./SEG PB./SEG _LQFP00 PB./SEG PC.0/SEG PC./SEG PC./SEG0 PC./SEG PC./SEG PC./SEG 0 PC./SEG PC./SEG PC./SEG PC./SEG L L00 NC ADAVSS DVDD VDD CB0 C TICE_RST 0.uF C00 uf/0v TANT-A 0 V/PD. V/PD. V/PD. NC VLCD NC DH/PD. DH/PD. COM0/PD.0 COM/PD. 0 COM/PD. COM/PD. SEG0/PD. SEG/PD. SEG/PD. SEG/PD. SEG/PD. SEG/PD. SEG/PD.0 SEG/PC. 0 SEG/PC. SEG/PC. SEG0/PC. SEG/PC. SEG/PC.0 PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN C uf C00 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN00 PIN[..00] C XKO 0pF C00 X.KHz XTAL- PIN TICE_RST DVDD PIN0 C 0pF C00 Crystal XKI VDD R 0 R00 VDD JP HEADER CB 0.uF C00 DVDD TP SIP/P TP SIP/P TP SIP/P TP SIP/P PIN IO GREEN 00 JP HEADER Title NuTiny-EVB--LQFP00 V.0 Size Document Number Rev Custom NANO.SCH V.0 Thursday, August 0, 0 Date: Sheet of Jul 0, 0 Page of Rev.00

20 Jul 0, 0 Page 0 of Rev.00 GPIO for 00 Pin Schematic. PIN PIN GND PIN[..00] PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN00 PIN PIN PIN PIN PIN0 PIN PIN GND PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN JP HEADER PX 0 0 PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN0 PIN0 PIN PIN PIN PIN PIN PIN00 PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN Title Size Document Number Rev Date: Sheet of OTHER.SCH V.0 NuTiny-EVB--LQFP00 V.0 Custom Monday, May 0, 0 PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN GND PIN PIN PIN PIN PIN PIN PIN JP HEADER PX 0 0 PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN00 PIN PIN0 PIN PIN GND PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN GND PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN0 PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN PIN GND PIN PIN PIN JP HEADER PX 0 0 PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN GND PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN JP HEADER PX 0 0 JP HEADER PX,.00mm 0 0 GND JP HEADER PX,.00mm 0 0 JP HEADER PX,.00mm 0 0 PIN JP HEADER PX,.00mm 0 0

21 Jul 0, 0 Page of Rev.00 NuTiny-EVB-TNLCD- Schematic. PIN PIN PIN PIN PIN SEG PIN SEG PIN PIN0 PIN PIN PIN PIN PIN SEG PIN SEG PIN SEG PIN SEG PIN SEG PIN SEG PIN SEG PIN V PIN SEG PIN COM0 PIN SEG PIN SEG PIN0 SEG PIN0 COM PIN COM PIN SEG PIN SEG PIN PIN PIN PIN U TN LCD X SEG PIN SEG PIN SEG PIN DH PIN SEG0 PIN SEG PIN SEG PIN SEG0 PIN SEG PIN SEG PIN SEG0 PIN C 0.uF C00 SEG PIN C 0.uF C00 V PIN0 SEG0 PIN SEG PIN SEG PIN SEG PIN SEG PIN0 DH PIN SEG PIN C 0.uF C00 V PIN COM PIN0 SEG PIN Title Size Document Number Rev Date: Sheet of X TN LCD glass.sch V.0 NuTiny-EVB-TNLCD--LQFP00 V.0 Custom Thursday, April 0, 0 PIN PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN0 PIN PIN PIN PIN PIN PIN C 0.uF C00 PIN PIN00 PIN PIN0 PIN PIN PIN PIN PIN PIN PIN PIN0 PIN PIN JP HOLDER PX,.00mm 0 0 PIN JP HOLDER PX,.00mm 0 0 SEG PIN PIN SEG PIN SEG PIN00 JP HOLDER PX,.00mm 0 0 JP HOLDER PX,.00mm 0 0

22 REVISION HISTORY Date Revision Description Preliminary version. Jul 0, 0 Page of Rev.00

23 Important Notice Nuvoton Products are neither intended nor warranted for usage in systems or equipment, any malfunction or failure of which may cause loss of human life, bodily injury or severe property damage. Such applications are deemed, Insecure Usage. Insecure usage includes, but is not limited to: equipment for surgical implementation, atomic energy control instruments, airplane or spaceship instruments, the control or operation of dynamic, brake or safety systems designed for vehicular use, traffic signal instruments, all types of safety devices, and other applications intended to support or sustain life. All Insecure Usage shall be made at customer s risk, and in the event that third parties lay claims to Nuvoton as a result of customer s Insecure Usage, customer shall indemnify the damages and liabilities thus incurred by Nuvoton. Jul 0, 0 Page of Rev.00

for NuMicro NUC029FAE Series

for NuMicro NUC029FAE Series for NuMicro NUC09FAE Series The information described in this document is the exclusive intellectual property of Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.