S5-S. MRC series. Socket for square base relay C5- Connection diagram. Dimensions [mm] Technical approvals, conformities EN , EN ø4.
|
|
|
- Iris Boone
- 5 years ago
- Views:
Transcription
1 MRC series S5-S Socket for square base relay C5- S5-S 3-pole, 2 level Logic wiring Integrated retaining clip and labelling space 16 A 16 A / 00 V All terminals/din rail kv Terminal/terminal kv Cross-section of connecting wire Single-wire mm 2 or 2 x 2,5 mm 2 Multi-wire 22-1 AWG 1,2 Nm M3,5, Pozi, slot for relay series C , A, B; DIN/EN 81g 9 (31) B (A2) 3 (32) 6 (3) Associated, plug-in 11-pin MRC relays C5-A, C5-G, C5-X, C5-M, C5-R 8 (21) 2 (22) 5 (2) in.. According to EN 6097 and IEC (11) A (A1) 1 (12) (1) Retaining spring, steel S-C CP-15B ø6.5 ø M RELECO S5-S A2 A1 A EN , EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice
2 MRC series S5-M Socket for square base relay C5- : S5-M 3-pole, 3 level Module slot for timer- and monitoring modules, over voltage suppressing- and LED indicator modules coil bridge bus bar to connect in A2 16 A 16 A / 00 V Test voltage Vrms / 1 min All terminal/din rail kv Terminal/terminal kv Cross section of connecting wire Single wire 1 x 6 mm 2, 2 x 2,5 mm 2 Multi wire 1 x 6 mm 2 /AWG10, 2 x 1,5 mm 2 /AWG16 1 Nm M3,5, Pozi, slot for relay series C5 1 12, DIN/EN DIN rail TS35 or panel mounting 1 x M Ambient temperature operation / storage -0 (no ice) 60 C/-0 80 C 92g 12 (A2) 9 (31) 8 (21) 11 (B1) 10 (A1) 7 (11) 3 (32) 6 (3) 2 (22) 5 (2) 1 (12) (1) Associated, plug-in 11-pin MRC relays C5-A, C5-G, C5-X, C5-M, C5-R Coil bridge bus bar C-A2 S5MCP C-A M A2 RELECO S5-M B1 A This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
3 MRC series S5-L, S5-P, S5-PO Socket for soldering and printed circuit for relays C5- S5-L 3-pole, flange panel mountable S5-P 3-pole, printed circuit S5-PO 3-pole, printed circuit with flange 16 A 16 A / 00 V (UL: 300 V) Ambient temperature operation/storage -0 (no ice). 60 ºC / C 20g Retaining spring, steel S-L Printed cicuit lay-out [mm] EN , EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice
4 QRC series S7-C Socket for miniature relays C7- and C80 series time relays : S7-C 2-pole, 1 level integrated clip and marking label suitable for clips C80 series time relays coil bridge bus bar to connect in A2 plug-in slot for overvoltage suppressing units 10 A 10 A / 250 V Test voltage Vrms / 1 min All terminal/din rail 2.5 kv Terminal/terminal 2.5 kv Cross section of connecting wire Single wire mm 2, 2 x 1,5 mm 2 Multi wire 2,5 mm 2 / AWG 16, 2 x 1 mm 2 / AWG Nm M3, Pozi, slot for relays C7 1 8, DIN/EN Ambient temperature operation/storage -0 (no ice) 60 C / C 37g 8 (A2) 6 (21) 5 (11) 7 (A1) (2) 2 (22) 3 (1) 1 (12) Associated plug-in 8-pin QRC relays C7-A2x, C7-T, C7-G, C7-X, C7-W, C7-H Associated C80 time relays C83, C85, 8 Coil bridge bus bar S7-B CP-09B Please note: This socket replaces former socket S7-M fully compatible S7-B RELECOMAT 8 S7-C A2 6 B1 5 7 A Lloyd s This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
5 QRC series S7-I/O Socket for miniature relays C7- S7-I/O 2-pole, 2 level Integrated clip and marking label Coil bridge bus bar to connect in A2 Logic wiring 10 A 10 A / 250 V All terminals/din rail 2,5 kv Terminal/terminal 2,5 kv Cross-section of connecting wire Single-wire mm 2 or 2 x 2,5 mm 2 Multi-wire 22-1 AWG 1,2 Nm M3, Pozi, slot for relay series C ; DIN/EN Ambient temperature operation/storage -0 (no ice) 60 ºC / C 38g Associated, plug-in 8-pin QRC relays C7-A2x, C7-T, C7-G, C7-X, C7-W, C7-H 8 A2 9 7 A Coil bridge bus bar S7-B CP-01B Lloyd s EN , EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice
6 QRC series S7-16 Socket for miniature relays C7-A10 S pole, 1 level Integrated retaining clip and labelling space 16 A 16 A / 250 V All terminals/din rail 2,5 kv Terminal/terminal 2,5 kv Cross-section of connecting wire Single-wire mm 2 or 2 x 2,5 mm 2 Multi-wire 22-1 AWG 1,2 Nm M3, Pozi, slot for relay series C7-A ; DIN/EN 31g Associated, plug-in 5-pin QRC relays C7-A10 8 A2 M 1 CP-07B A S7-16 for relays C7-A10 (16 A) RELECO S A2 11 A Lloyd s EN , EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
7 QRC series S7-L, S7-P, S7-PO Socket for PCB and soldering for miniature relays C7 S7-L 2-pole, flange panel mountable S7-P 2-pole, printed circuit S7-PO 2-pole, printed circuit with flange 10 A Dielectric strength adjacent pin 10 A / 250 V 2.5 kv rms / 1 min 1...8; DIN/EN for relay series C7 S7-P: (CP-07B) S7-L + S7-PO: (CP-01B) 10g for S7-P for S7-L + S7-PO CP-07B CP-01B Printed cicuit lay-out [mm] S7-P S7-PO 1.5 ø M RELECO 8 7 S7-L A RELECO 8 7 S A 22.5 Lloyd s EN , EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice
8 QRC series S9-M Socket for miniature pole relay C9- S9-M -pole, 2 level Integrated clip and marking label 6 A 6 A / 250 V All terminals/din rail 2,5 kv Terminal/terminal 2,5 kv Cross-section of connecting wire Single-wire mm 2 or 2 x 2,5 mm 2 Multi-wire 22-1 AWG 0.7 Nm M3, Pozi, slot for relay series C9 (CP-01B) 1...1; DIN/EN 5g Socket for poles, QRC relays C9-A, C9-E, C9-R CP-01B A A S9M-V S9M-V1- S9M-BX Bridge can be divided by hand A2 A A S -M RELECO C9 relay S9-M (1) C9 relay S9-M (2) C9 relay S9-M (3) C9 relay S9-M () A2 A2 A1 A2 A2 A1 A2 A2 A1 A2 A2 A Lloyd s EN , EN Cable 2 VDC S9M-V1 Cable 230 VDC This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
![..1; DIN/EN for relay series C9 S9-P: (CP-07B) S9-L + S9-PO: (CP-01B) 12g for S9-P for S9-L + S9-PO CP-07B CP-01B Printed cicuit lay-out [mm]. 0.6.05 6.35 6.35 S9-P S9-PO 13.](/docs-images/95/123036984/images/9-1.jpg "2 ø1.7 22.5 M3 12.6 7.7 5 6 36. 3 2 1 8 7 6 5 12 11 10 RELECO S -L 1 13 9 3 2 1 8 7 6 5 30 12 11 10 RELECO S - 1 13 1.2 2.6 22.")
9 QRC series S9-L, S9-P, S9-PO Socket for PCB and soldering for miniature relays C9 S9-L -pole, flange panel mountable S9-P -pole, printed circuit S9-PO -pole, printed circuit with flange 6 A Dielectric strength adjacent pin 6 A / 250 V 2.5 kv rms / 1 min 1...1; DIN/EN for relay series C9 S9-P: (CP-07B) S9-L + S9-PO: (CP-01B) 12g for S9-P for S9-L + S9-PO CP-07B CP-01B Printed cicuit lay-out [mm] S9-P S9-PO 13.2 ø M RELECO S -L RELECO S Lloyd s EN , EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice
10 IRC series S10 Socket for Interface relay S10 1-pole, 1 connection level Logic wiring Integrated retaining clip and labelling space Coil bridge bar for A2, A 10 A / 250 V All terminals/din rail 5 kv Contact terminals 2,5 KV Contact / Coil terminals 5 KV Cross-section of connecting wire Single-wire mm 2 or 2 x 2,5 mm 2 Multi-wire 22-1 AWG 1,2 Nm M3, Pozi, slot for relay series C10, CSS (CP-17B) 1...5; DIN/EN 23g 5(A2) (A1) 3(12) 2(11) 1(1) Socket for plug-in 10A IRC relays C10-A, C10-T, CSS, C10-G Coil bridge bars S10-BB CP-17B BRIDGE BAR EN , EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
11 IRC series S10-M Socket for Interface relay S10-M I/O socket for IRC relays, 16 A Logic connection, 2 x A2 16 A 16 A / 250 V All terminals/din rail 5 kv Contact / Coil terminals 5 kv Cross-section of connecting wire Single-wire mm 2 or 2 x 2,5 mm 2 Multi-wire 22-1 AWG 1,2 Nm M3, Pozi, slot for relay series C10, CSS (CP-17B) 1...6; DIN/EN 25g Socket for plug-in 10A IRC relays Coil bridge bars C10A, C10G, C10T and CSS V10-G, V0-G, V10-R, V0-R, V10-A, V0-A, B20-G, B20-R, B20-A CP-17B 5(A2) 6(A2) (A1) 3(12) 2(11) 1(1) Ø Ø Ø2.8 COIL BRIDGE BARS A2 A2 A1 S10-M M POWER BRIDGE BARS 75 IEC EN 6097 This issue replaces all previous issues. Availability, errors and specifications subject to change without notice
12 IRC series S10-P Printed circuit socket for Interface relays, C10 and CSS : S10-P Printed circuit socket for 1-pole IRC relay 10 A 10 A / 250 V Coil terminals to contacts 5 kv rms Hard Brass tin-platted terminals 0,5 x 1 mm for relay series C10, CSS (CP-2B) 1...5; DIN/EN 7g CP-2B S10-P Ø IEC EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
13 IRC series S12 Socket for Interface relay S12 I/O socket for C12 relays with 2 x CO Logic connection, 5 A 5 A 5 A / 250 V All terminals/din rail 5 kv Contacts terminals 2,5 kv Contacts / Coil terminals 5 kv Cross-section of connecting wire Single-wire mm 2 or 2 x 2,5 mm 2 Multi-wire 22-1 AWG 1,2 Nm M3, Pozi, slot for relay series C12 (CP-17B) 1...9; DIN/EN 31g 5(A2) 9(22) 3(12) Socket for IRC relays Coil bridge bars C12, C12G V10-G, V0-G, V10-R, V0-R, V10-A, V0-A B20-G, B20-R, B20-A, CP-07B CP-17B 6(A2) (A1) 8(21) 7(2) 2(11) 1(1) Ø Ø Ø S A2 A2 A M IEC EN 6097 This issue replaces all previous issues. Availability, errors and specifications subject to change without notice
14 IRC series S12-P Printed circuit socket for Interface relays, C12 : S12-P Printed circuit socket for 2-pole C12 relay 5 A 5 A / 250 V Pole / Pole 3 kv Coil / contact terminals 5 kv Hard brass tin-plated terminals 0,5 x 1 mm 7g for relay series C12, (CP-2B) CP-2B IEC EN This issue replaces all previous issues. Availability, errors and specifications subject to change without notice.
1.5 Solid State Relays
Relays.. Solid State Relays Application s Pins Contacts AC ratings DC ratings Socket CSS Series AC Solid state, Instantaneous switching CSS-I A / 0 V S0 AC Solid state synch. to zero crossing CSS-Z A /
RM84 miniature relays
RM84 miniature relays RM84 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) AC AC1 AC15 DC1 DC13 Motor load acc. to
VZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data
Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications
34,2 [1.34] 006: 6V. T: T series 012: 12V Type E: without button 024: 24V 048: 48V. Circuit connect to coil 0: without circuit S: with button
![34,2 [1.34] 006: 6V. T: T series 012: 12V Type E: without button 024: 24V 048: 48V. Circuit connect to coil 0: without circuit S: with button](/thumbs/91/107056640.jpg "34,2 [1.34] 006: 6V. T: T series 012: 12V Type E: without button 024: 24V 048: 48V. Circuit connect to coil 0: without circuit S: with button")
Relays RM-T series RMS2-TRelay 8 pins 2 contacts Wiring diagram RMS2-T Dimensions RMS2-T 33,4 [1.31] 34,2 [1.34] 52,1 [2.05] 34,2 [1.34] Coil temperature 2,8 [.11] RMS3-TRelay 11 pins 3 contacts Wiring
Zelio Relay - plug-in relays
Presentation Presentation offer the advantages of compact size and modular design: their slim width ( mm) saves space when mounting on a rail at the back of an enclosure. RSL relays are available in two
RM84 / RM85 / RM87 Miniature Electromagnetic Relays
Miniature dimensions Cadmium - free contacts 5000 V / 10 mm reinforced insulation For PCB and plug-in sockets Available special versions with the increased dielectric strength of the contact clearance
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
40 Series - Miniature PCB/Plug-in relays A. 3.5 mm contact pin pitch 1 Pole 10 A PCB or 95 series sockets.
40 Series - Miniature PCB/Plug-in relays 8-10 - 12-16 40 1 & 2 Pole relay range 40.31-1 Pole 10 (3.5 mm pin pitch) 40.51-1 Pole 10 (5 mm pin pitch) 40.52-2 Pole 8 (5 mm pin pitch) PCB mount - direct or
General Purpose Relays R2N/R4N Miniature Power Plug-in Relays
eneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays The Relpol R2N and R4N eneral Purpose Miniature Power Relays, typically called miniature cube type in the industry, offer high reliability and
Miniature PCB Relays A
SЕRIES Miniature PCB Relays 8-10 - 12-16 Medical and dentistry Control panels Panels for electrical distribution Toys utomation for blinds, grilles and shutters Door and gate openers Electronic circuit
4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
V REG.-Nr. 3919, Z E214024
General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection
Slim Industrial Relay Type RSLM Electromechanical
Type RSLM Electromechanical RSLM Slim size (width 5mm) High breakdown voltage 4kV (between coil and contacts) Surge voltage up to 6kV (between coil and contacts) Conforms to VDE 0700, 0631 reinforced insulation
RUC industrial relays of small dimensions
RUC industrial relays of small dimensions 135 with adaptor (V) Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching
Interface Relay CRINT-1x
Interface Relay CRINT-1x 1 Features Space saving interface relay to combine with PLCs Coil voltage UC12, 24, 48, 60, 110-125, 220-240V Integrated protection circuit Relay is replaceable separately Available
Square D General Purpose Relays
Square D General Purpose Relays Class 850R miniature control relays 850RS4 standard 850RS24 low level 850RS34 hermetically sealed Catalog 204 Contents Class 850R miniature control relays bbspecifications....................................................
RUC industrial relays of small dimensions
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
PI84 with socket GZM80 interface relays
RM84 + GZM80 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) Min. switching current Max. inrush current Rated current
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
RUC industrial relays of small dimensions
with adaptor (V) with adaptor (H) Power relays of general application AC and DC coils Mounting: in sockets; 35 mm rail mount acc. to PN-EN 60715; on panel; PCB Versions: faston 187 (4,8 x 0,5 mm); faston
ALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
R15 industrial relays of small dimensions
R15 127 R15 2 C/O R15 3 C/O R15 4 C/O Contact data Number and type of contacts Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated
Advantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
- 1 - Product catalogue PCB connection systems PCB terminals Clamping yoke connection LM 5.00 / 5.08 LM 5.00/135
General ordering data Order No. 1715360000 Part designation LM5.00/3/135 OR Version EAN 4008190365240 Qty. 500 pc(s). PCB terminal, Clamping yoke connection, Soldered connection, Clamping range, max.:
Module 18plus. Description. 18plus
Module 8plus Description Wiring of load and signal lines in a space-saving manner will become ever more important for designers of electrical plants and systems, because all control cabinets and control
Powermate Range pitch 10.16
Contents owermate Range pitch.16 owermate Range pitch.16 owermate Range pitch.16 Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 owermate Range pitch.16 SU.16/9
RUC-M industrial relays for DC loads
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Min. breaking capacity
Details of the Han-Terminal block connector Han D AV Han D AV Distributor Han E AV Han ES AV
Contents -Terminal Block Connectors Page Details of the -Terminal block connector........................ 08.02 D................................................... 08.10 D Distributor...........................................
Solid-state Timer H3YN
Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-T...
Description ngle, two and three pole magnetic and hydraulic-magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only hydraulically delayed switching characteristics
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
Miniature Relays Series M25 Type M25-1 pole 16 A Monostable
Miniature Relays Series M25 Type M25-1 pole 16 A Miniature size mm PCB mounting 5 kv / 10 mm insulation Switching capacity 16 A / 250 General purpose, industrial electronics Sealed according IP 67 Low
Insulated Enclosure KU 4090 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4090 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 105 mm Uo to 48 plus-minus-terminal screws with self raising terminal washers. Part insertion
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
PRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
VMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
Ultra Slim Relays 24
Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest
Multi Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC
DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y
Data sheet... OMNIMATE Power - series BL/SL 7.62HP BLZ 7.62HP/04/180LR SN BK BX
Power on board #96 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC)
Solid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately)
Solid-state Timer Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple
Advantages of the 820 Series Time Delay Relays
Advantages of the 820 Series Time Delay Relays Time Setting Select Between 10 Different Time Scales. Fine Time Setting Ultimate Control in Accuracy. The new 820 Series Time Delay Relays are DIN rail mountable
Insulated Enclosure KU 4087, KU 4088 KU 4089 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4087, KU 4088 KU 4089 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 17,5 / 35 / 70 mm 8 / 16 / 32 plus-minus-terminal screws with self raising
- 1 - General ordering data Order No
General ordering data Order No. 1730710000 Part designation BL 5.00/3 SN SW Version EAN 4008190387327 Qty. 100 pc(s). System parameters Conductor connection system Leaf spring connection Outgoing direction
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS Quick Selector Chart Spring-loaded connectors and Pad connectors TEL +1 32 21 0 00 2 mm 2.5 mm 3 35, 36 35, 36 Surface mount perpendicular with positioning
Time Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
Power distribution systems - accessories
Connections and terminals Line terminal X 221 3 01 Power-D-Box with sockets pre-wired Line terminal (max. 63 A) X 221 3 01 14.551 max. tightening torque 3.0 Nm 15.591 busbar X1, X2 blade terminals 6.3
Conductive Sensors 2 to 4-point level controller Type CL with teach-in
Conductive Sensors to -point level controller Type CL with teach-in Conductive level controller Teach-in of sensitivity operating resistance from 0Ω to 0KΩ Multiple combinations of filling and emptying
RUM Universal Relays
Zelio Plug-in Relays Product Description Product Description The RUM universal relay range consists of:. 0 A relays with DPDT and PDT contacts, with cylindrical or flat pins, and A low level relays with
Insulated Enclosure KU 4091 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4091 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 140 mm optionally 32 or 64 plus-minus terminal screws with self raising terminal washers Part
onlinecomponents.com
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
Devices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
Solid-state relay (SSR) advantages. Solid-state relays
Electromechanical relays Solid-state relays, or C/O,, or C/O C/O or N/O 0 A A 0 A A 0... A 0... A DIN rail or panel DIN rail DIN rail or panel Panel RUM RPM RPF ABS SSRD SSRP to to 0 to to to to Solid-state
Ice Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...
Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in
RCMB20/RCMB Series
4 T M /-500 Series Integratable Ground Fault Monitoring Modules For Integration Into Frequency Converters and Combiner Boxes Technical Bulletin NAE1042510 / 10.2012 BENDER Inc. 700 Fox Chase, Coatesville
GT3F Series True OFF Delay Timers
TF Series TF Series True OFF Delay Key features of the TF series include: Mountable in sockets or flush panel True power OFF-delay up to 10 minutes No external control switch necessary Available with reset
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
RM699B miniature relays
Version (V) Contact data Number and type of contacts Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
Electropneumatic miniature control valves Mounting Connectors Minisolenoid valves Indicators LED seals LED Valve modules Poppet 3/2 single pilot 4/2 s
ElectroPneumatic Miniature Control Valves Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com /47 Electropneumatic miniature control valves Mounting Connectors Minisolenoid
ABE7R16S210 sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm
Characteristics sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm Main Range of product Product or component type [Us] rated supply voltage Number of channels 16 Number of terminal
Sockets. SY Series: DIN Rail Snap-Mount. F-14 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC. SY4S Sockets SY4S-05
SY Series: DIN Rail Snap-Mount SY4S Sockets SY4S-05 Style Terminal Wire Size Electrical Rating Compatible Relay Compatible Timer Hold-Down Spring 14-blade, snap-mount/surface mount M3 screw with captive
Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
Conductive Sensors 2 to 4-point level controller Type CL with teach-in
Conductive Sensors to 4-point level controller Type CL with teach-in Conductive level controller Teach-in of sensitivity operating resistance from 0Ω to 0KΩ Multiple combinations of filling and emptying
OTB1C0DM9LP I/O distributed module OTB - CANopen bus m
Characteristics I/O distributed module OTB - CANopen bus - 0..1000 m Main Range of product Product or component type Integrated connection type Bus type Jan 28, 2018 Modicon OTB I/O distributed module
Thermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
Magnetic and Hydraulic-Magnetic Circuit Breaker
Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.
Accessories for pluggable interface relays CR-M Sockets
2CDC 292 072 F0004 2CDC 291 0 F0004 2CDC 291 004 F0005 2CDC 291 042 F0004 CR-M4LS CR-M4LC CR-M4SS CR-MH Features Logical and standard socket for interface relays CR-M Snap-on mounting on DIN rail Width
Switches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
Item No.: /
Female connector; with angled solder pins; 4-pole; with locking levers; pin spacing 508 mm / 02 in; solder pin 06x mm; codable; Horizontal PCB mounting Item No: 232-264/039-000 Female connector; with angled
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
Extract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
Item No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
Accessories for pluggable interface relays CR-P Sockets
Data sheet Accessories for pluggable interface relays CR-P Sockets Characteristics Logical and standard socket for pluggable interface relays CR-P Snap-on mounting on DIN rail Connector for pluggable function
SPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
Product and Applications Description. Application Programs. Example of Operation. Installation Instructions. load circuit AC 230/400V L1 L2 L3 N
Product and Applications Description Application Programs 20 A4 Binary 906401 4 binary outputs 1 status request available for each output 1 relation can be set allows 1 positive drive for each output initial
MODULES FOR SAFETY AND MONITORING
MODULES FOR SAFETY AND MONITORING Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-43 Muttenz, Switzerland Tel. ++4 6 / 466 33 33, Fax ++4 6 / 46 96 06 http://www.woertz.ch Woertz-USA 5 Discovery Drive,
VG-8T socket - Screw terminal, wall/ Datasheet
- Screw terminal, wall/ Datasheet rail mount Features 35 mm rail mounting Screw terminals Suitable for G8-relays No internal soldering Retaining clip connection possible Benefits Proven reliability Long
ABE7R16S210 sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm
Characteristics sub-base - soldered electromechanical relays ABE7-16 channels - relay 10 mm Main Range of product Product or component type [Us] rated supply voltage Number of channels 16 Number of terminal
Classification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
ISOMETER isoev425/isoev425hc with coupling device AGH420
with coupling device AGH420 Insulation monitoring device for unearthed DC circuits (IT systems) for charging electric vehicles isoev425_d00126_04_d_xxen/06.2018 with coupling device AGH420 Insulation monitoring
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Complementary Concept Port Ethernet Bus length Main Number of devices per segment 0...256 Communication service Web services Discrete
1492-SP Supplementary Protectors
Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Approval marks are easily visible on dome Terminal design helps prevent wiring misses Scratch-
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
CU/CP-U200-B relay - High contact life
relay - High contact life Datasheet Features Miniature plug-in / PCB relay Instantaneous 2 C/O contacts Weld-no-transfer contacts Magnetic arc blow-out Optional built-in LED (red or green colour) Flat,
CS8 Industrial Control Relays
CS8 Industrial Control Relays Despite increasing complexity, control systems and installations must become increasingly compact. And the CS8 Miniature Relay System packs maximum performance into minimum
Magnecraft Time Delay and Sensor Relays. Catalog
Magnecraft Time Delay and Catalog 0 Contents Magnecraft Time Delay and Series Overview... 0 Series Relays.... Series Voltage Sensing Relays... Series Current Sensing Relays...0 00 Series Accessories....
Discrete I/O 12 Discrete Inputs 8 Relay Outputs CANopen P/N: AXDIO128CO
Description: The Discrete I/O Module reads 12 discrete inputs and sets 8 Form C relay outputs while providing a simple interface between a CANopen network and other electronic devices on a machine. The
CONTA-ELECTRONICS. Fuse, component, diode and indicator modules
Fuse, component, diode and indicator modules In the passive electronics sector, CONTA-CLIP offers a large variety of module types which support fast, secure, and compact functionality. These modules can
Ferrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
RM17TG. Main. Product or component type. Product specific application. Relay monitored parameters. Switching capacity in VA
Characteristics phase control relay RM17-T - range 183..484 V AC Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Switching
NEW Series SSH Output to 75A, 510 Vac with Diagnostics High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models with system diagnostics Very low zero-cross turn-on voltage Input and output protection and control LED standard IP20 protection by flaps on terminals With double removable
Solid State Remote Power Controller E
Description The E-T-A is a transistorised switching device providing both protection and signalisation. It is suitable for all applications where the capabilities of the existing PLC s are not sufficient
Micro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals
Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals Technical Data Type: KS 4401 KS 4402 KS 4403 KS 4461 KS 4404 KS 440 KS 4406 Article number * ) : 00636 00637 0063987 00614
Data sheet. OMNIMATE Signal - series B2L/S2L row S2L-SMT 3.50/08/180G 3.5SN BK BX
OMNIMATE Signal - series /S2L 3.50-2-row High-temperature-resistant, straight, 2-tier male connector for all common soldering methods. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder
RE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC
Characteristics on-delay timing relay - 0.02 s..300 h - 24..240 V AC - 2 OC Product availability : Stock - Normally stocked in distribution facility Price* : 73.00 USD Main Range of product Product or