Sockets. SY Series: DIN Rail Snap-Mount. F-14 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC. SY4S Sockets SY4S-05
|
|
|
- Melvin Preston
- 6 years ago
- Views:
Transcription
1 SY Series: DIN Rail Snap-Mount SY4S Sockets SY4S-05 Style Terminal Wire Size Electrical Rating Compatible Relay Compatible Timer Hold-Down Spring 14-blade, snap-mount/surface mount M3 screw with captive wire clamp Maximum up to 2 #14AWG 300V, 7A RY4S, RY42S, RM2S, RY2KS, RY2LS GT5Y 0.232" (5.9mm) 0.157" (4mm) 1 for all relays; 3 for RY2KS only SA-101 (top notch), SA-202 (side notch) for all relays and timers 0.189" (4.8mm) Ø 0.126" (3.2mm) 2.441" (62mm) 0.118" (3mm) 0.236" (6mm) 1.023" (26mm) 1.181" (30mm) Ø 0.118" (M3) 1.77" (45mm) Ø 0.164" (4.2mm) 1.122" (28.5mm) 0.709" (18mm) 0.728" (18.5mm) 0.975" (25mm) DIN Rail Panel Cutout for Surface Mounting Terminal Arrangements (top view) Ø 0.164" (4.2mm) 2 Holes 1.023" (26mm) 1.28" (32.5mm) " (6mm) Ø 0.118" (M3) SY4S-05C ingersafe Style 14-blade, snap-mount/surface mount Terminal Wire Size Electrical Rating Compatible Relay Compatible Timer Hold-Down Spring M3 screw with captive wire clamp, fingersafe Maximum up to 2 #14AWG 300V, 7A RY4S, RY42S, RM2S, *RY2KS, *RY2LS GT5Y 1 for all relays; 3 for RY2KS only SA-101 (top notch), SA-202 (side notch) for GT5Y timer and relays 2.519" (64mm) 0.079" (2mm) 1.023" (26mm) 1.181" (30mm) Ø 0.164" (4.2mm) (46mm) 0.716" (18.2mm) 1.14" (29mm) DIN Rail Panel Cutout for Surface Mounting Ø 0.164" (4.2mm) 2 Holes 1.023" (26mm) 1. or socket mounting accessories, see page or hold-down clip/spring selections, see page USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
2 Selection Guide Specifications Rated Insulation Voltage Rated Current Insulation Resistance Dielectric Strength Material Grade 300V; except SH1B and SY4S-62: 250V SR/SH/SM: 10A, SY: 7A (SH1B coil terminal 7A) 100MΩ minimum 2,000V AC, 1 minute UL94V-0 ile No. BL * UL Recognized ile No. E64245, E62437 CSA Certified ile No.LR35144 * 1. * Applicable to DIN rail sockets only. Relay Socket Part Numbering Guide Relay socket part numbers are composed of 5 part number codes. When ordering a relay socket, select one code from each category. Example: SR2P-05C SR 2 ➀ Socket Series ➁ No. of Poles P 05 C ➂ Termination ➃ Mounting Style 5 ingersafe Option Part Numbers: Relay Sockets Description Part Number Code Remarks SR SR or use with RR series relays ➀ Socket Series SH SH or use with RH series relays SY SY or use with RY series relays SM SM or use with RU2, RM2 series relays 1-pole 1 SH series ➁ No. of Poles 2-pole 2 SR, SH, SM, and SY series 3-pole 3 SR, and SH series 4-pole 4 SH series Tubular pin P SR series ➂ Termination Blade B SH series Solder/blade S SY and SM series ➃ Mounting Styles 5 ingersafe Option DIN rail snap-mount 05 To decide between configuration 05 and 06, see pictures and schematics beginning on page Panel mount 51 PC board mount With finger-protection terminals Without finger-protection terminals C Leave blank Model 05 is available as 05C with a fingersafe option; see 5 below Available only on SR, SH, SM, and SY series snap-mount sockets 2. or hold-down springs and clips for DIN rail snap-mount, panel mount, and PC board mount, see page or socket accessories, see page USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC -3
3 Selection Guide Relay and Timer Socket Selection Guide Relay and Timer Sockets DIN Rail Snap-Mount Panel Mount PCB Mount Surface Mount Mounting Series Page Part No. SR -6 SH -9 SY -13 SM -15 SR -16 SH -17 SY -19 SH 3-20 SY 3-21 SR2P-05 SR2P-05C SR2P-06 SR3P-05 SR3P-05C SR3P-06 No. of Poles Receptacle Terminal Compatible IDEC Relay and Timer 2 8-Pin 3 11-Pin M3.5 Screw RR2P, GT5P, RTE-P1, GT3 (8-pin) RR3PA, RR2KP, RTE-P2 GT3 (11-pin) SR3B Blade RR1BA, RR2BA, RR3B, RTE-B SH1B-05 SH1B-05C SH2B-05 SH2B-05C SH3B-05 SH3B-05C SH4B-05 SH4B-05C SY2S-05 SY2S-05C SY4S-05 SY4S-05C SM2S-05 SM2S-05C 1 5-Blade 2 8-Blade M3.5 Screw Coil Terminal: M3 RH1B RH2B 3 11-Blade M3.5 Screw RH3B, RH2LB 4 14-Blade RH4B 2 8-Blade 4 14-Blade M3 Screw RY2S, RY22S RU4S, RY4S, RY42S, RY2KS, RY2LS, RM2S, GT5Y RU2S SR2P Pin RR2P, RAPP, RBPP, GT5P, RTE-P1, GT3 (8-pin) SR3P Pin RR3PA, RR2KP, RTE-P2, GT3 (11-pin) SR3B Blade RR1BA, RR2BA, RR3B SH1B Blade RH1B, RAHB, RBHB SH2B Blade Solder RH2B, RAMB, RBMB SH3B Blade RH3B, RH2LB SH4B Blade RH4B SY2S Blade RY2S, RY22S 4 14-Blade RY4S, RY42S, RY2KS, RY2LS, RM2S, GT5Y SH1B Blade RH1B, RAHB, RBHB SH2B Blade RH2B, RAMB, RBMB SH3B Blade RH3B, RH2LB SH4B Blade PC Board RH4B SY2S Blade RY2S, RY22S SY4S Blade RY4S, RY42S, RY2KS, RY2LS, RM2S, GT5Y SY4S Blade RY4S, RY42S, RY2KS, RY2LS, RM2S, GT5Y SH -23 SH2B Blade M3.5 Screw RH2B, RAMB, RBMB or Panel Mounted Timers SR -23 SR6P-M08G SR6P-M11G 2 8-pin 11-pin M3.5 Screw GE1A; RTE-P1; GT3A-1,-2,-3; GT3D-1,-2,-3; GT3W (8-pin); GT3S; GT3 RTE-P2; GT3A-4,-5,-6; GT3D-4,-8; GT3W (11-pin) or relay mounting accessories, see page USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
4 Selection Guide Hold-Down Springs and Clips Selection Guide DIN Rail Snap-Mount Sockets Socket Part No. Applicable Relays, Timer Hold-Down Pullover Spring SR2P-05 SR2P-05C SR2P-06 SR3P-05 SR3P-05C (side notch) RR2P SR2B-021 SA-203 RTE-P1, GT3, GT5P SA-203 RR2P SR2B-021 SA-202 GT3 (8-pin), RTE-P1, GT5P SA-202 RR3PA SR3B-021 SA-203 RR2KP SR3P-063 SA-203 RTE-P2, GT3 (11-pin) SA-203 RR3PA SR3B-021 SA-202 SR3P-06 RR2KP SR3P-063 SA-202 RTE-P2, GT3 (11-pin) SA-202 SR3B-05 RR1BA, RR2BA, RR3B, RTE-B SR3B-021 SA-202 SH1B-05 SH1B-05C SH2B-05 SH2B-05C SH3B-05 SH3B-05C SH4B-05 SH4B-05C SY2S-05 SY2S-05C SY4S-05 SY4S-05C RH1B SY2S-021 RH2B SY4S-021 RH3B, RH2LB SH3B-051 RH4B SH4B-021 RY2S, RY22S SY2S-021 RY4S, RY42S, RY2LS, RM2S 1 (top notch) SA-101 SA-202 SA-101 SA-202 SA-101 SA-202 SA-101 SA-202 SA-101 SA-202 SA-101 SA-202 RY2KS, GT5Y (3) SA Hold-down springs work in conjunction with hold-down spring anchors included with DIN rail sockets. 2. When mounting relays with a check button onto panel mount or PC board mount sockets, use the hold-down spring shown in parenthesis. Hold-down springs for relays with check buttons are not available for SR2P or close mounting of panel mount or PC mount sockets, use hold-down clips rather than hold-down springs. 4. SA-101, SA-202 and SA-302 come in pairs. SR2B-021 SR3B-021 SY4S-021 SH3B-051 SH4B-021 Photo Not Available Photo Not Available 1 3 SR3P-011 SR3P-063 SY2S USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
5 Selection Guide Panel and PC Board Mount Sockets Socket Part No. Applicable Relays, Timer Hold-Down Pullover Spring SR2P-51 SR3P-51 SR3B-51 SH1B-51 SH1B-62 SH2B-51 SH2B-62 SH3B-51 SH3B-62 SH4B-51 SH4B-62 SY2S-51 SY2S-61 SY4S-61 SY4S-62 * * Does not accept hold down clips (side notch) RR2P SR3P-011 GT3 (8-pin), RTE-P1 SA-402 RR3PA SR3P-011 RR2KP SR3P-513 GT3 (11-pin), RTE-P2 SA-402 RR1BA, RR2BA, RR3B, RTE-B SR3B-021 RH1B 1 RH2B RH2B RH3B, RH2LB RH4B 1 (SY4S-021) 1 (SY4S-021) 1 (SY4S-021) 1 (SH4B-021) RY2S, RY22S 1 RY4S, RY42S, RY2LS 1 (SY4S-021) RY2KS 1 (SY4S-023) SA-302 GT5Y SA-302 RY4S, RY42S, RY2LS, RM2S RY2KS 1 (SY4S-021) 1 (SY4S-023) (top notch) SA-301 SA-302 SA-301 SA-302 SA-301 SA-302 SA-301 SA-302 SA-301 SA-302 SA-301 SA-302 SA-101 SA-202 SA-302 Photo Not Available SA-301 SA-203 SA USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC -5
6 Accessories Accessories SA-203 Socket End Connector Description Appearance Use with Part No. Remarks Aluminum DIN Rail (1 meter length) All DIN rail sockets BNDN1000 IDEC offers a low-profile DIN rail (BNDN-1000). The BNDN-1000 is designed to accommodate snapmount sockets and surface mount sockets. Made of durable extruded aluminum, the BNDN measures 0.413" in height and 1.37" (35mm) in width (DIN standard). Standard length is 39" (1,000mm). DIN Rail End Stop Surface Mount End Connector BNDN1000 DIN rail BNL5 9.1 mm wide. SY2S, SY4S, SR3B, SH1B, SH2B, SH3B, SH4B SA-203 SA-204 or use on ends of socket groupings when surface mounting. or use between adjoining sockets when surface mounting. Surface Mount Connector SY2S, SY4S, SR3B, SH1B, SH2B, SH3B, SH4B SA-405 or use between adjoining sockets when surface mounting. DIN Rail Spacer All DIN rail sockets SA-406 Steel Mounting Plates (for panel mount sockets), SH2B-51 SA " length with 10 holes., SH2B-51 SA " length with 21 holes. Relay Holders RH2B, RM2S, RY4S, RY42S, RY2LS, RAMB, RBMB RY2S, RAHB,RBHB, RH1B RH-01 RH-03 or diagram, see next page. Replacement Hold-Down Spring Anchor (horseshoe clip) All DIN rail sockets Y or use with hold-down springs (bale wire types). or DIN rail mount sockets. 2 pieces included with each socket USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
7 Instructions Instructions Mounting Snap-Mount Sockets Snap-mount sockets are designed to mount on the BNDN-1000 Mount mounting rail. The built-in mounting clip eliminates mounting hardware and reduces mounting time by 80%. To mount see igure 1. Place the end of the socket (end opposite of mounting clip against the outer edge of the rail). Press the socket down firmly until the clip snaps onto the mounting rail. To remove igure 1 see igure 2. Pull out the mounting clip with a screwdriver, and lift the socket. Remove or spacing between adjoining sockets, use the SA-406 DIN rail spacer. Spacers are 0.195" wide. Spacing can be adjusted according to the number of spacers added. Spacers snap on and off easily like snap-mount sockets. igure 2 To prevent side-to-side movement, use a BNL-5 end clip at each end of every socket row. Hold-Down Spring Mounting Relay Holders RH-01 or -03 Mount directly onto panel boards in two alternate positions: A and B (see igure 1). igure 1 To mount the relay into the holder, hook the bottom edge of the relay case (coil terminal side) onto the relay holder (see igure 2). Push down until the relay snaps into place. igure 2 Mounting Hold-Down Springs Take the two anchor clips (horseshoe / U-shaped piece) that come with the socket and insert into the slits on both sides of the socket. Make sure the raised notches on the anchor clip face into the socket. Plug relay into socket Insert the open ends of the hold-down spring into either the first or second hole of the anchor clip. The relay-spring combination will determine which hole should be used. Slide spring over relay. USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC -25
8 Dimensions Dimensions Surface Mount Sockets (SH2B-02) IDEC surface mount sockets (SH2B-02) are also designed to mount individually or collectively on a flat surface without the use of a DIN rail. Use the mounting screw between adjoining sockets and at the outer ends of the row of sockets. Dimension Table Socket Part No. Dimension A SH2B " A A A 1. Drawing is not to scale. Snap-Mount Sockets Snap-mount sockets are designed to mount individually or collectively without using a rail. Use a SA-405 connector or SA-204 connector between adjoining sockets (see igures 1 and 2). Use the SA-203 end connector at the outer ends of each socket row when using the SA-204 connector (see igure 2). Dimension Table Socket Part No. Dim. B Dim. C Dim. D SY2S-05, SY2S-05C 0.669" 0.826" 0.866" SY4S-05, SY4S-05C 1.024" 1.181" 1.220" SR3B " 1.693" 1.732" SH1B-05, SH1B-05C 0.630" 0.787" 0.827" SH2B-05, SH2B-05C 1.024" 1.181" 1.220" SH3B-05, SH3B-05C 1.417" 1.575" 1.614" SH4B-05, SH4B-05C 1.811" 1.969" 2.008" Using an SA-406 Connector B C C C Using SA-203 or SA-204 Connectors C 0.165" Hole or M4 Tapped D D D 2. Drawings are not to scale USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
9 Dimensions Dimensions, continued Collective Panel Mounting SH and SY series panel mount sockets are designed to mount collectively in panel cut-outs. Insert socket with mounting springs facing the top and bottom edge of the panel cut-out. Push the socket until the mounting spring clips onto the panel. (See igure 1.) Dimension Table Part No. Width Relay igure " RY4S, RY42, RY2KS, RY2LS, RM2S SH4B " RH4B RH1B RM2S RH2B RY2KS SH3B " RH3B, RH2LB SH2B " RH2B, RAMB, RBMB SH1B " RH1B, RAHB, RBHB SY2S " RY2S, RY22S How to Calculate Cutout Length (L) Cutout L = A (Total Overall Width of Each Socket) 0.221" (+ 0", 0.020") Example: A = Total Overall Width of Each Socket Cutout L = A 0.221" (+ 0", 0.020") SY2S-51 SH1B-51 SY2S-51 SH1B-51 SH2B-51 L = [0.709" " " " " " " "] 0.221" = 7.93" L = 7.93" (+ 0", 0.020") Mounting Plate USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC -27
SH Series: DIN Rail Snap-Mount Sockets. SH1B Sockets " (17mm) Ø 0.140" (3.6mm) 2.613" (67mm) 0.63" 0.098" (16mm) (2.5mm) 0.
SH Series: Snap-Mount SH Series: Snap-Mount Sockets SH1B Sockets SH1B-05 5-blade, snap-mount/surface mount (Coil) M3 screws/(contact) M3.5 screws with captive wire clamp 250V, 10A SY2S-021 SA-101, SA-202
Relays & Sockets RR Series Power Relays. Part Number Selection
RR Series Power Relays Key features: SPDT through PDT, A contacts Midget power type relays Available in pin and blade terminal styles. Options include an indicator, check button for test operations and
Timers. RTE Series. RTE Series Analog Timers. Specifications. G-8 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC
Analog Timers Key features of the RTE series include: time ranges and timing functions ON-delay, interval, OFF-delay, one-shot Time delays up to 0 hours Space-saving package (." x." x.0") High repeat accuracy
Timers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum
GT5Y GT5Y Series ON Delay Key features: 4PDT, 3A or DPDT, 5A contacts 4 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing out LED indicators Uses the same
T imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC.
Industrial Automation Catalog Section - U906 imers Selection uide iming Diagrams Overview RE Series Analog imers Instructions imers For up-to-date information, or to request a full copy of this catalog,
Timers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours
GT3W Key features: Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions 2 time settings in one timer 8 selectable operation modes on each model Mountable in sockets
DIN Rail Mounting Accessories. Style Appearance Use with Timers Part No. Appearance Part No. RTE-P2 SR3P Pin FingerSafe Socket RTE-P2 SR3P-05C
RTE Series DIN Rail Mounting Accessories Part Numbers: DIN Rail/Surface Mount Sockets and Hold-Down Springs DIN Rail Mount Socket Applicable Hold-Down Springs Style Appearance Use with Part No. Appearance
RTE Series Analog Timers. UL Listed File No. E kPa to 110kPa (Operating), 70kPa to 110kPa (Transport)
Analog Key features of the RE series include: 0 time ranges and 0 timing functions ime delays up to 600 hours Space-saving package High repeat accuracy of ± 0.% ON and timing LED indicators Standard 8-
Timers NEW DESIGN! RTE Series. RTE Series Analog Timers
RE Series imers RE Series Analog imers NEW DESIN! Key features of the RE series include: 0 time ranges and 0 timing functions ime delays up to 600 hours Space-saving package High repeat accuracy of ± 0.%
PS5R Series Switching Power Supplies. The PS5R offers a sleek, compact, ergonomic design, worldwide approvals, and broad range of output capacities.
Switching Power Supplies The offers a sleek, compact, ergonomic design, worldwide approvals, and broad range of output capacities. With U 508 isting, additional savings in space and cost can be realized
Intrinsically Safe Explosion Proof Barriers
Safety Intrinsically Safe Explosion Proof For more information on this product family, visit our website. Additional resources include: New and updated product information Downloadable software demos &
Page Housing Plastic Metal Mounting DIN Rail or surface mount Panel or bracket mount Wattage Range 10W to 240W 7.5W to 240W 10W to 300W
Selection Guide Selection Guide PS5R Slim Line PS5R PS3L Operator Interfaces Communication & Networking PLCs NEW Models Appearance Automation Software Page 107 113 118 Housing Plastic Metal Mounting DIN
GT3F Series True OFF Delay Timers
TF Series TF Series True OFF Delay Key features of the TF series include: Mountable in sockets or flush panel True power OFF-delay up to 10 minutes No external control switch necessary Available with reset
Power Supplies. PS5R Standard Series Switching Power Supplies. Part Numbers. Part Number
Standard Series Key features: Wide power range: 7.W-24W Universal input : 7.W-W: 8-264V AC/1-37V DC 1W: 8-2V AC/17-264V AC 24-37V DC (selectable) W, W, 24W: 8-264V AC/11-3V DC Overcurrent/overvoltage protection
Ice Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...
Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in
Altech s DIN Enclosures by
Altech s DIN Enclosures Since 98 Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection
Q Series Q Series PB elays Switches & Pilot Lights Display Lights IDE Q relays are low-profile, PB relays that provide quality within a compact package. Size equals value. Q relays are small, yet maintain
Transistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
Insulated Enclosure KU 4087, KU 4088 KU 4089 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4087, KU 4088 KU 4089 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 17,5 / 35 / 70 mm 8 / 16 / 32 plus-minus-terminal screws with self raising
S5-S. MRC series. Socket for square base relay C5- Connection diagram. Dimensions [mm] Technical approvals, conformities EN , EN ø4.
![S5-S. MRC series. Socket for square base relay C5- Connection diagram. Dimensions [mm] Technical approvals, conformities EN , EN ø4.](/thumbs/95/123036984.jpg "S5-S. MRC series. Socket for square base relay C5- Connection diagram. Dimensions [mm] Technical approvals, conformities EN , EN ø4.")
MRC series S5-S Socket for square base relay C5- S5-S 3-pole, 2 level Logic wiring Integrated retaining clip and labelling space 16 A 16 A / 00 V All terminals/din rail kv Terminal/terminal kv Cross-section
FOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
Male connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
Temperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
Insulated Enclosure KU 4090 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4090 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 105 mm Uo to 48 plus-minus-terminal screws with self raising terminal washers. Part insertion
General Purpose Relays R2N/R4N Miniature Power Plug-in Relays
eneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays The Relpol R2N and R4N eneral Purpose Miniature Power Relays, typically called miniature cube type in the industry, offer high reliability and
onlinecomponents.com
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
Insulated Enclosure KO 4763 with box terminals for solder or plug-in technology
Insulated Enclosure KO 4763 with box terminals for solder or plug-in technology Technical Data Width 45 mm Max. 16 box-terminals with captive plusminus-screws Electrical connection from PCB to terminal
ALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
Insulated Enclosure KU 4091 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4091 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 140 mm optionally 32 or 64 plus-minus terminal screws with self raising terminal washers Part
H3CA-8H-AC/100/110/120
Solid-State Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay, Repeat
Item No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
RM84 miniature relays
RM84 miniature relays RM84 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) AC AC1 AC15 DC1 DC13 Motor load acc. to
VZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data
Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications
SLC30 Series Panel Mounted Annunciators. SLC Series Panel Mounted Annunciators an Ideal Alternative to Mounting Multiple Pilot Devices
Series: 1.18" Series Panel Mounted Annunciators Switches & Pilot ights SC Series Panel Mounted Annunciators an Ideal Alternative to Mounting Multiple Pilot Devices Cluster mounting simplifies panel cutouts
Digital Timer. Ordering Information. 1/16 DIN, Quartz Timer with Four-Digit LED Display
Digital Timer 1/16 DIN, Quartz Timer with Four-Digit LED Display Five wide ranges to choose from Wide-range AC or DC supply voltages Elapsed time (UP) or time remaining (DOWN) display available Selectable
RACON short-travel keyswitches
General data short-travel keyswitches with sealed contact system and distinct key click, excellent switching reliability. For use under an overlay or with RK 90 keycaps. Print and SMD versions available
Oiltight Switches & Pilot Devices
LED and Incandescent ilot Lights (Sub-Assembled) Removable Terminal* + Operator + Lamp + Lens = Completed Unit * Removable terminals are applicable for CB terminated types only. art Numbers: ilot Light
Communications & Networking
8-Point Source Input & 8-Point Transistor Sink Output odule () Key features include: Communicate with network 8-point source input and 8-point sink output module Removable terminal blocks Use as remote
Safety Control. FS1A Multi-function Safety Relay. Optional Parts. Connecting Tool. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
Oiltight Switches & Pilot Devices
ø22mm - LW Series Oiltight LED and Incandescent Illuminated ushbuttons (Assembled) art Numbers: LW1L/LW2L Illuminated ushbuttons (LED and Incandescent) art Number Contact Style Contact Momentary Maintained
ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description
Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
SLC40 Series Panel Mounted Annunciators
Series 1.57" Series Panel Mounted Annunciators SC 40 Series Annunciators SC series panel mounted annunciators are an ideal alternative to mounting multiple pilot devices. Cluster mounting simplifi es panel
Thermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
for a perfect electrical installation. The range of rail-mounted terminal blocks
The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal
TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO
The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4
RM84 / RM85 / RM87 Miniature Electromagnetic Relays
Miniature dimensions Cadmium - free contacts 5000 V / 10 mm reinforced insulation For PCB and plug-in sockets Available special versions with the increased dielectric strength of the contact clearance
Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
ALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
Interlock Switches. Selection Guide. HS7A-DMC Magnetic Safety Switches
HSA-DMC Magnetic Safety Switches Key features: Compact size and easy positioning. Combination with proprietary relay modules achieves safety category 4 (EN954-1). Compact size ( 16 51mm) Positioning for
Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals
Insulated Enclosure KS 4400 with fixed or pluggable screw or cage clamp terminals Technical Data Type: KS 4401 KS 4402 KS 4403 KS 4461 KS 4404 KS 440 KS 4406 Article number * ) : 00636 00637 0063987 00614
Electrical Connection Technology. New Items: Autumn 2007
Electrical Connection Technology New s: Autumn 2007 Contents Rail-Mounted Terminal Block Systems Volume 1 02 57 PCB Terminal Blocks and Connectors Volume 2 58 91 WINSTA WINSTA 93 97 Index of Nos. 98 102
LUMOTAST FK. General data. Content. Pushbuttons 1-9
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
QR/P4 SERIES. Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels
QR/P4 SERIES Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels General QR/P4 Series is a series of small connectors for rack and panel application. This is a smaller-size version
PRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
Switches & Pilot Devices
Key features: 21/64 (8mm) round mounting hole Compact Design Saves Space Bright and Vivid Illumination Choice of Shapes and Functions old Clad Silver Contacts for reliable low level switching Snap action
Model 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
WAGO product LOCATOR 4.1
Technical data Package size 50 pieces. Cross section from [mm2] 0.08 mm2 Cross section to [mm2] 4 mm2 Cross section from [AWG] 28 AWG Cross section to [AWG] 12 AWG Weight 17.298 g Color green-yellow Wiring
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
Modular PCB terminal block; 2 solder pins/pole; 1-pole; pin spacing 5/5.08 mm / 0.2 in; with push-button
push-button - Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole; pin spacing 5/508 mm / 02 in; with push-button Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole;
Ripac VME/VME64x Systems. Applications. Design Features
Overview Of Systems For VMEbus Ripac VME/VME64x Slim-Box Ripac VME/VME64x Systems Ripac VME/VME64x Systems 1, 2, 3, 4U/2, 4, 6, 8 slot in AC input Order No. see pages 110-112 For backplanes see page 60
Varistor installation. Input logic. Voltage of relay coil
Features For driving various loads using PLC output signals Easily check operation status and high luminance LED turns on with input signals Choose various relays depending on each load voltage or current
Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
Safety Control. FS1A Multi-function Safety Relay. Optional Parts. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Control Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
812/ 814/ 815 digital timers
8/ 84/ 85 digital timers 8 84 85 Relay output digital timer Multirange Multivoltage or relay outputs Reset function on panel (imers 85) Data saved in the event of a break in supply (imer 85) Access to
engineered to connect Y-Sol - PhotovoltaicS Products
engineered to connect Y-Sol - PhotovoltaicS Products connector SOLUTIONS introduction What is the meaning of Hermetic Sealed? Hermetic Sealed is a one step overmolding process. In a one step process the
Male connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
SA1E: Photoelectric Switches. Polarized Retroreflective Type. Through-beam Type
SAE: Photoelectric Simple, compact design for world-wide usage. Key features of the SAE photoelectric sensor include: Four sensing methods Cable types and M8 connector types available NPN output, PNP output,
Data Sheets Wiring Components. Fanning Strips. Guide Rings and Holder. Guide Hooks. Spacer Bars. Dummy Plates. Contact. Christian Jaramillo-Arriagada
Data Sheets Wiring Components Fanning Strips Guide Rings and Holder Guide Hooks Spacer Bars Dummy Plates Contact Fax: 0621 683206777 Fanning Strips Wiring Components For a clear connecting arrangement
JL05 SERIES CONNECTORS
The J0 Series connectors conforms to JISB0 specifications. J0 is a circular, waterproof connector using IPF structure. There is a one-touch locking mechanism for ease in mating and unmating. With first-to-make/last-to-break
Module 18plus. Description. 18plus
Module 8plus Description Wiring of load and signal lines in a space-saving manner will become ever more important for designers of electrical plants and systems, because all control cabinets and control
Industrial Control Relays Relays and terminal module RS type
Relaysandterminal module Relays-and-terminal module RS, N A very compact, space-saving terminal module containing four or six relays with one NO contact. Features The RS series relays-and-terminal module
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
Ultra Slim Relays 24
Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest
SN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
Ultra-small Rack/Panel Crimp Connectors
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
3RA13, 3RA14 Contactor Assemblies
RA1, RA Contactor Assemblies RA1 complete units,... kw Overview The RA1 reversing contactor assemblies can be ordered as follows: Sizes S00 to S Fully wired and tested, with mechanical and electrical interlock
78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
CONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
Time Counters mini "h", DC Version
Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable
WINSTA. Full Line Catalog 2008/2009
WINSTA Full Line Catalog 2008/2009 5 Contents FULL LINE CATALOG W4, Volume 1 Rail-Mounted Terminal Block Systems FULL LINE CATALOG W4 Rail-Mounted Terminal Blocks Volume 1 X-COM -SYSTEM Terminal Strips
[.050 (1.27mm) Density. D-Microminiature]
![[.050 (1.27mm) Density. D-Microminiature]](/thumbs/90/103901339.jpg "[.050 (1.27mm) Density. D-Microminiature]")
Commercial [.050 (1.27mm) Density Solder Introduction Cup/Wire D-Microminiature] Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
Terminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
V29 socket - Spring clamp terminal,
V29 socket - Spring clamp terminal, Datasheet wall / rail mount Features Surface / wall and 35 mm rail mount Sturdy spring clamp terminals Twin connection per relay contact No internal solderings / connections
US Catalog July 2016 SMISSLINE TP
US Catalog July 2016 SMISSLINE TP SMISSLINE TP modular bus system Table of contents Description 2 Building a SMISSLINE TP assembly for UL 489 and UL 508 based solutions Overview and ordering information
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
ZB5FG09 flush mounted selector switch head key pos stay put
Characteristics flush mounted selector switch head key 455 3 pos stay put Main Range of product OsiSense XC Series name Standard format Product or component type Limit switch Device short name XCKJ Sensor
Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.
9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting
UTS UTS. UTS provides a connection that performs faster, easier, safer and more reliable, it makes :
Company Profile UTS Contents Company profile... 2 Contents... 3 Description... 3 Overview TRIM TRIO... 4 Major features & benefits 5-9 Contact styles... 5 Rapid and secure locking system... 6 Rapid and
FT & RT Test Switches
GE Grid Solutions FT & RT Test Switches Key Benefits The FT Switches and FT Test Plugs have all the features necessary for applications involving the measurement of individual currents and voltages to
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo
Standard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
Accessories for pluggable interface relays CR-M Sockets
2CDC 292 072 F0004 2CDC 291 0 F0004 2CDC 291 004 F0005 2CDC 291 042 F0004 CR-M4LS CR-M4LC CR-M4SS CR-MH Features Logical and standard socket for interface relays CR-M Snap-on mounting on DIN rail Width
1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)