AN IMPROVED ROLLER BASED FLEXIBLE MEDIA PATH FOR HIGH DENSITY DATA RECORDING
|
|
- Justina Dorsey
- 5 years ago
- Views:
Transcription
1 JRConsulting LLC Atwood, Colorado AN IMPROVED ROLLER BASED FLEXIBLE MEDIA PATH FOR HIGH DENSITY DATA RECORDING J Robert (Bob) Cope JRConsulting LLC 4304 County Road 31, Atwood CO Phone: FAX: jrjecope@kci.net Presented at the THIC Meeting at the National Center for Atmospheric Research-Boulder Colorado July 19-20, 2005
2 Mechanical Aspects of Recording
3 Aspects - Continued
4 And Lastly...
5 THERE ARE A LOT OF FACTORS IMPACTING Y MOTION WHERE... BALL BEARINGS ARE THE BIGGEST LIMITATION TO INCREASING TRACK DENSITIES ON ROLLER BASED TAPE PATH DATA RECORDERS.... HERE S WHY
6 FOR ANY DATA PHYSICAL FORMAT YOU WILL ENCOUNTER TRACK MISREGISTRATION
7 WHAT ARE THE CONTRIBUTORS TO TRACK MISREGISTRATION? SERVO POSITIONING ON READ BACK SERVO TRACK WRITING STRAIGHTNESS EDGE QUALITY SLITTING ACCURACY OR DAMAGE MEDIA CREEP DUE TO ENVIRONMENT CHANGES BALL BEARING NON-REPEATABLE RUNOUT (NRR) GUIDE SYSTEM ACCURACY FOR MEDIA POSITION LONGITUDINAL WAVES IN THE MEDIA-INERTIA HARD STARTS FROM SERVO SYSTEM POSITION OF MULTIPLE WRITE-READ HEAD GAPS MEDIA SLITTING VERSUS ROLLER WIDTH ETC ETC ETC...
8 BALL BEARINGS ADVANTAGES ARE: COSTS DUE TO MATURITY AVAILABILITY FROM MANY VENDORS STANDARD SIZES AVAILABLE ABEC STANDARDS WELL ESTABLISHED LUBRICATION NEEDS ARE WELL DEFINED RELIABILITY IS EXCELLENT
9 BALL BEARINGS-CONT D DISADVANTAGES ARE: - 3 PIECE CONSTRUCTION WITH CLEARANCES REQUIRED - MACHINING ACCURACY ACCUMULATES PIECE BY PIECE - ABEC SORTING VERSUS FUNCTION - PROPER LUBRICATION IS REQUIRED - LUBRICATION ADDS POSITION VARIATIONS - PROPER SPRING PRELOAD IS MANDATORY
10 NO INTERFERENCE ALLOWED VERY BEST MACHINING IS 6 MICRONS ( IN) NEED SOME NOMINAL CLEARANCE TO OPERATE DLT PRODUCT LINE BEARING HAVE 12 MICRONS NRR ( IN) DLT1 (BENCHMARK) HAS 50 MICRON TRACKS 25% OF THEIR TRACK BUDGET IS TAKEN UP BY BALL BEARINGS
11 FOUR ROLLER TAPE PATH USES 8 BALL BEARINGS NEEDS CAREFULLY DESIGNED PRELOAD SPRINGS BALL BEARING NRR IS SIGNIFICANT CONTRIBUTOR TO TRACKING BUDGET HIGH ACCELERATIONS HIT INERTIAS OF ROLLERS CAUSING LONGITUDINAL TENSION WAVES IN MEDIA A 25% CONTIRBUTION TO THE TRACK BUDGET IS HUGE
12 LATERAL MOTION HYDRODYNAMIC/ HYDROSTATIC FLOATING MEDIA SUPPORT ROLLER SURFACE CONTACT MEDIA SUPPORT SLIDES DOWNHILL CLIMBS UPHILL
13 ROLLER SURFACE AIR FILM PRESSURE BUILD AT ENTRY TOUCH DOWN AT EXIT SLOTS ALLOW LOWER FLYING AND MORE CONTACT
14 ROLLER FLANGE GUIDING CANNOT BUILD PERFECTLY SQUARE ROLLER PATH FLYING MEDIA SLIDES DOWNHILL CONTACT MEDIA CLIMBS UPHILL INTERMITTENT CONTACT GOES BOTH WAYS ROLLERS ARE VERY REAL CAPACITY LIMITATION
15 HOW TO GET MORE TRACK DENSITY USING ROLLERS AND GET MORE DATA INTO YOUR CARTRIDGE
16 PATENT 3,122,295 PATENT HISTORY
17 PATENT HISTORY- CONT D PATENT 4,337,885
18 PATENT HISTORY-CONT D PATENT 3,078,022
19 PATENT HISTORY-CONT D PATENT 4,565,495
20 PATENT HISTORY-CONT D PATENT 6,336,608
21 AN IMPROVED ROLLER BASED TAPE PATH DESIGN
22 PROVIDE A BIDIRECTIONAL HYDRODYNAMIC AIR SUPPLY FOR THE ROLLER ITSELF - PROVIDE EXTERNAL ROTATION TO ROLLER - SPIN IN OPPOSITE DIRECTION OF MEDIA - SURFACE SPEED OF THE ROLLER TO BE FASTER
23 AND, PROVIDE A HYDROSTATIC AIR SUPPLY TO THE ROLLER MEDIA SURFACE FROM PATENT 6,336,608
24 AND, PROVIDE AN INCLINED ROLLER SURFACE TO BIAS THE MEDIA TO A FIXED GUIDE SURFACE NON-VIBRATING GUIDE SURFACE MEDIA IS STABILIZED FOR THE BEST POSSIBLE TRACKING ACCURACY
25 A WORKING TAPE PATH DESIGN APPROACH 2 REEL MOTOR-4 ROLLER LAYOUT WITH 2 FIXED GUIDE SURFACES
26 Roller Design with 100% Hydro-Static Air Cushion
27 ADVANTAGES HAS BENEFITS OF PNEUMATIC AIR SUPPLY SYSTEM AND NOT THE COST OR SIZE VERY STIFF AIR FILM OVER ROLLER SURFACE AT ALL TIMES WITH NO INTERMITTENT CONTACT MEDIA IS POSITIONED FIRMLY AGAINST GUIDE SURFACE FOR BEST POSSIBLE TRACKING MORE TRACK DENSITY IS POSSIBLE, AND THUS MORE DATA CAPACITY IN THE CARTRIDGE THE CHANNEL GUYS WILL LOVE IT...
28 DISADVANTAGES HAS NOT BEEN BUILT OR TESTED SOME SIZEABLE DEVELOPMENT ENGINEERING EFFORT IS NEEDED TO DETERMINE: HOLE NUMBER, PATTERN, AND SIZE INTERNAL VANE SHAPE AND SIZE RATIO OF TAPE VERSUS ROLLER SURFACE SPEEDS MEASURE FRICTION OCCURENCES, IF ANY HOW MUCH TRACKING VARIATION WILL OCCUR DURING OPERATION MEASURE TRACK MOVEMENT WITH FIXED SENSOR BEST ROLLER DRIVE SYSTEM TO USE: GEARS BELTS DC MOTOR DIRECT DRIVE OTHER IDEAS
29 THIS TAPE PATH SYSTEM DESIGN IS WORTH INVESTING IN A SOLID DEVELOPMENT EFFORT- A RESULT WOULD BE HIGHER MEDIA CARTRIDGE CAPACITY BOB COPE
Line of Sight Stabilization Primer Table of Contents
Line of Sight Stabilization Primer Table of Contents Preface 1 Chapter 1.0 Introduction 3 Chapter 2.0 LOS Control Architecture and Design 11 2.1 Direct LOS Stabilization 15 2.2 Indirect LOS Stabilization
More informationENGINEERING MEASUREMENTS ENTERPRISE LTD. TECHNICAL REPORT RESULTS OF DEVIATION MEASUREMENTS AND GEOMETRY OF ROTARY KILN GEOCEMENT PLANT
GEOSERVEX s.c. Zbigniew i Boleslaw Krystowczyk e-mail: office@geoservex.com.pl http://www.geoservex.com.pl office: ul. Kościuszki /19A 8-9 Bydgoszcz, POLAND tel: (+48) 34 6 fax: (+48) 34 6 EU VAT ID No:
More informationSOLIDWORKS SIMULATION
SOLIDWORKS SIMULATION Innovation is about taking chances, not taking risks Scootchi by Curventa Designworks LTD What if? is the question that fuels innovation. SolidWorks Simulation software takes the
More informationManipulator Dynamics: Two Degrees-of-freedom
Manipulator Dynamics: Two Degrees-of-freedom 2018 Max Donath Manipulator Dynamics Objective: Calculate the torques necessary to overcome dynamic effects Consider 2 dimensional example Based on Lagrangian
More informationCARTRIDGE REMANUFACTURING INSTRUCTIONS TONER CARTRIDGE DRUM CARTRIDGE
XEROX PHASER 7400 CARTRIDGE REMANUFACTURING INSTRUCTIONS TONER CARTRIDGE DRUM CARTRIDGE REMANUFACTURING THE XEROX PHASER 7400 TONER & DRUM CARTRIDGES By Mike Josiah and the Technical Staff at UniNet The
More informationTHE XEROX PHASER 7400 TONER & DRUM CARTRIDGES
THE XEROX PHASER 7400 TONER & DRUM CARTRIDGES DOC# 0403 By Mike Josiah and the technical staff at Summit Technologies a Division of Uninet Imaging. XEROX PHASER 7400 TONER & DRUM CARTRIDGE REMANUFACTURING
More informationProduct information PI 54 en Machining unit xxx Slide unit xxx
Product information PI 54 en Machining unit 0.5.030.xxx Slide unit 0.2.200.xxx 2016-03-01 Table of Contents Table of Contents Machining Unit Brief Description...4 Technical Data...6 Dimensions...7 Precision...8
More informationGIGA 8888 CNC 45 TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS INDEX 1. General description and overview page 1 2. Giga 8000 series base machine description page 1 3. Drilling heads page 2 4. Tooling plates page 3
More informationTHE HP CLJ 1500/2500/2550 DRUM/TRANSFER UNIT
THE HP CLJ 1500/2500/2550 DRUM/TRANSFER UNIT DOC# 0313 By Mike Josiah and the Technical Staff at Summit Technologies HP CLJ 1500/2500/2550 DRUM/TRANSFER UNIT REMANUFACTURING INSTRUCTIONS Page 1 Remanufacturing
More informationFundamental of Hard Disk Drive Technology (6)
Outline Fundamental of Hard Disk Drive Technology (6) Assistant Prof. Piya Kovintavewat, Ph.D. Data Storage Technology Research Unit Nakhon Pathom Rajabhat University E-mail: piya@npru.ac.th URL: http://home.npru.ac.th/piya
More informationSolidWorks Motion Study Tutorial
SolidWorks Motion Study Tutorial By: Mohamed Hakeem Mohamed Nizar Mechanical Engineering Student- May 2015 South Dakota School of Mines & Technology August 2013 Getting Started This tutorial is for you
More informationApplication Notes for Team Hydrostatic Pad Bearings
Application Notes for Team Hydrostatic Pad Bearings THESE COMMODITIES, TECHNOLOGY, OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY
More informationYOUR COMPLETE SOURCE FOR. Gear Reducers Couplings & Linear Mount Products. Product Range. GAM Can.
YOUR COMPLETE SOURCE FOR Gear Reducers Couplings & Product Range Linear Mount Products GAM Can. YOUR COMPLETE SOURCE FOR GEAR REDUCERS, COUPLINGS & LINEAR MOUNT PRODUCTS Product Selection Guide Gear Reducers
More informationManipulation and Fluid Power. October 07, 2008
2008 TE Sessions Supported by Manipulation and Fluid Power October 07, 2008 www.robojackets.org Manipulation Keys to Understanding Manipulators What is a manipulator? What kinds of manipulators are there?
More informationBLITZ 60L - BLITZ 55 - BLITZ 50. Double head sawing machine with motorized movement of the mobile head and electronic control of the head tilting
BLITZ 60L - BLITZ 55 - BLITZ 50 Double head sawing machine with motorized movement of the mobile head and electronic control of the head tilting 12/08/2015 - Page 1 of 12 Technical specifications: First
More informationTP SERIES TURRET PUNCH DURMA
BETTER PARTS BETTER PROFITS TP SERIES Standard Equipment Siemens 840Dsl CNC Control Remote Diagnostic via Ethernet Automatic Clamp Positioning Alignment Tool Oil Cooler Brush Table Up to Six Indexable
More informationPrecimar. PLM and CiM Universal Length Measuring Machines
24 Precimar. Precision Length Metrology Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed
More informationL4 Min. L2 Stroke Length. SDM Ø16x5/10/ M5x L1-294
Hepcootion SD - Screw Driven odule The Hepcootion SD range has been based on the popular SBD range of belt driven linear actuators but incorporates a ballscrew into the design. This allows for improved
More informationIntroduction to Metrology. ME 338: Manufacturing Processes II Instructor: Ramesh Singh; Notes: Profs. Singh/Melkote/Colton
Introduction to Metrology 1 Metrology-Science of Measurement What do we usually measure Time Space Flow Mass/weight/force In this topic we will measure Geometry Quality Surface finish Singh/Kurfess/Joshi
More informationRotary Stages ov -rot ar y-stages-divider - U pdated
Rotary Stages ov-rotary-stages-divider - Updated - 18-09-2017 189 Rotary Stages High precision overview Positioning Stages L3550 Ø50 Rotary stage Accurate to 70 arc-secs, repeatedly to 3 arc/sec. Loads
More informationHow to Model Friction in SIMPACK
How to Model Friction in SIMPACK 1. General Modelling friction in multi-body systems is somewhat challenging. The friction law itself is a simple function, see figure. However, if the relative velocity
More informationPrecimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION
Precimar Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed for absolute and relative measurement
More informationCARTRIDGE REMANUFACTURING INSTRUCTIONS XEROX PHASER 6180 TONER CARTRIDGE
XEROX PHASER 6180 CARTRIDGE REMANUFACTURING INSTRUCTIONS XEROX PHASER 6180 TONER CARTRIDGE REMANUFACTURING THE XEROX PHASER 6180 TONER CARTRIDGES By Mike Josiah and the Technical Staff at UniNet First
More informationSBT SERIES. Swing Beam Touch Shear
SBT SERIES Swing Beam Touch Shear World s heaviest and most robust swing beam shear construction Proven reliable design frame with rigid swing style upper beam Optimized cutting angle for minimized distortion
More informationPXL33 with 25, 60 and 110 mm travel
Linear Stages with 25, 60 and 110 mm travel Features < 2nm incremental motion possible Resolutions to 10nm and 1Vpp available Small footprint, low profile Travel to 110mm Linear motor Linear encoder Limit
More informationCOMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series LSMA-173
COMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series Narrow Width ized Translation Stages Compact (30 mm) design Precision bearing system Resolution 0.1 microns Standard stroke 20 and 50 mm Optional
More informationASSIGNMENT 11. Textbook Assignment: Magnetic Disk Storage, chapter 10, pages 10-1 through
ASSIGNMENT 11 Textbook Assignment: Magnetic Disk Storage, chapter 10, pages 10-1 through 10-2 11- Magnetic disks are generally used as which of the following types of storage? 11-5. Fixed disks have which
More informationXEROX PHASER 5500 TONER & DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
XEROX PHASER 5500 TONER & DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS XEROX PHASER 5500 TONER CARTRIDGE XEROX PHASER 5500 DRUM CARTRIDGE REMANUFACTURING THE XEROX PHASER 5500 TONER & DRUM CARTRIDGES By
More informationDK-M3-FS and DK-M3-F Focus Module Developer s Kits Tiny, all-in-one smart motion modules for positioning optics in OEM cameras
DK-M3-FS and DK-M3-F Focus Module Developer s Kits Tiny, all-in-one smart motion modules for positioning optics in OEM cameras Tiny all-in-one solution: no external control board needed Superior image
More informationCANON IMAGECLASS MF (128)
CANON IMAGECLASS MF4420 4450 4570 (128) TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS CANON IMAGECLASS MF4570 SERIES (128) TONER CARTRIDGE REMANUFACTURING THE CANON IMAGECLASS MF4570 SERIES (128) TONER
More informationCutter Option Installation Instructions
This kit includes the parts and documentation necessary to install the cutter option on the Zebra XiII, XiIII, and XiIIIPlus-Series printers. NOTE: The Cutter Option is not available for the 96XiIII. Adding
More informationDesign of a Precision Robot Wrist Interface. Patrick Willoughby Advisor: Alexander Slocum MIT Precision Engineering Research Group
Design of a Precision Robot Wrist Interface Patrick Willoughby Advisor: Alexander Slocum MIT Precision Engineering Research Group Project Summary Problem: Current bolted robot wrist replacements are inaccurate,
More informationServo-conventional milling machine
Universal Milling Machine Servo-conventional milling machine Control developed and built in Germany Positioning control for traveling pre-selected paths on all axes Constant cutting speed, whereby the
More informationOperator s Manual. 3-D Scanning Probe. Warranty Safety Features Setup Operation. Please save this manual for future reference.
Operator s Manual 3-D Scanning Probe Please save this manual for future reference. CAUTION: Read and follow all Safety Rules and Operating Instructions before using this product. LHR Technologies Inc.,
More informationStuduino Block Programming Environment Guide
Studuino Block Programming Environment Guide [DC Motors and Servomotors] This is a tutorial for the Studuino Block programming environment. As the Studuino programming environment develops, these instructions
More informationVIBRATION-ISOLATION SYSTEM WITH GYROSCOPIC STABILIZER
11 th International Conference on Vibration Problems Z. Dimitrovová et al. (eds.) Lisbon, Portugal, 9-12 September 2013 VIBRATION-ISOLATION SYSTEM WITH GYROSCOPIC STABILIZER Jan Škoda* 1, Jan Šklíba 2
More informationSAMSUNG ML TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
SAMSUNG ML-3050 3051 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS SAMSUNG ML-3050 TONER CARTRIDGE REMANUFACTURING THE SAMSUNG ML-3050/3051 TONER CARTRIDGES By Mike Josiah and the Technical Staff at UniNet
More informationRemoval and Installation8
8 Screw Types 8-4 Top Cover Assembly 8-5 Left Hand Cover 8-6 Right Hand Cover 8-10 Front Panel Assembly 8-14 Left Rear Cover 8-15 Right Rear Cover 8-16 Extension Cover (60" Model only) 8-17 Media Lever
More informationWEEKS 1-2 MECHANISMS
References WEEKS 1-2 MECHANISMS (METU, Department of Mechanical Engineering) Text Book: Mechanisms Web Page: http://www.me.metu.edu.tr/people/eres/me301/in dex.ht Analitik Çözümlü Örneklerle Mekanizma
More informationFriction & Roughness Measurement of Elastomer
Friction & Roughness Measurement of Elastomer Prepared by Jorge Ramirez 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2010 NANOVEA
More informationLab 12 - Interference-Diffraction of Light Waves
Lab 12 - Interference-Diffraction of Light Waves Equipment and Safety: No special safety equipment is required for this lab. Do not look directly into the laser. Do not point the laser at other people.
More informationGRM SERIES. Mechanical stamping and forming machines GRM 80E / GRM 80P
GRM SERIES Mechanical stamping and forming machines GRM 80E / GRM 80P More economical large-scale production Produce stamped and formed parts in large batches with even higher productivity. Benefit from
More informationC-pan arm USERS INSTRUCTIONS
C-pan arm USERS INSTRUCTIONS Designed 1 of 12 and made in Denmark Thanks for purchasing a 9.Solutions product. With great passion, we design our products to be as versatile as possible. We hope that our
More informationSTEP 1: MODULE MOUNTING / WIRING:
VER1.0 PINOUT DIAGRAM: PORT 1 - INPUT 1 (S.BUS, PWM, PPM INPUT) PORT 2 - INPUT 2 (PWM MODE INPUT OR AUX OUTPUT DEFINED IN SOFTWARE) PORT 3 - OUTPUT 1 (S.BUS OUTPUT) PORT 4 - OUTPUT 2 (SERVO OUTPUT) PORT
More informationLEXMARK E250/350/450 DRUM UNIT REMANUFACTURING INSTRUCTIONS
LEXMARK E250/350/450 DRUM UNIT REMANUFACTURING INSTRUCTIONS LEXMARK E450 LASER PRINTER DRUM UNIT REMANUFACTURING THE LEXMARK E250/350/450 DRUM UNIT By Mike Josiah SUPPLIES REQUIRED New replacement drum
More informationSUPPORTING LINEAR MOTION: A COMPLETE GUIDE TO IMPLEMENTING DYNAMIC LOAD SUPPORT FOR LINEAR MOTION SYSTEMS
SUPPORTING LINEAR MOTION: A COMPLETE GUIDE TO IMPLEMENTING DYNAMIC LOAD SUPPORT FOR LINEAR MOTION SYSTEMS Released by: Keith Knight Catalyst Motion Group Engineering Team Members info@catalystmotiongroup.com
More informationApplications: MultiCam Digital Express Feature and Specification Guide. The MultiCam. Signs and Graphics Digital Printing Packaging Aerospace And More
MultiCam Digital Express Feature and Specification Guide High-Speed Digital Finishing at 7000 Inches Per Minute! The MultiCam Digital Express boasts features normally found on more expensive X/Y/Z cutting
More informationGoTo Europe Focused Delivery Program. Product Overview Linear Motion Technology
GoTo Europe Focused Delivery Program Product Overview Linear Motion Technology 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times have
More informationRACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8
SIZE,,,, HIGH-PERFORMANCE ELECTRIC CYLINDERS: ROBUST, RELIABLE AND FLEXIBLE RETRO-FITTING The RACO actuator system is of modular design, and thus enables the combination of the most important integral
More informationWELDING CONSOLE KVS L
WELDING CONSOLE KVS L KVS-L 1x1 KVS-L 2x2 KVS-L 3,5x2 A (mm) AS REQUEST AS REQUEST AS REQUEST B (mm) 1000 2000 3500 C (mm) 1000 2000 2000 DIFFERENT WELDING PROCCESS TIG, MIG,MAG SAW TIG, MIG,MAG SAW TIG,
More informationSYMBOLS, UNITS AND DEFINITIONS
SYMBOLS, UNITS AND DEFINITIONS Values depending on the APPLICATION term u.m. definition A 2 [N] Thrust force on output shaft R 2 [N] Radial force on output shaft ED [min] Loading time ED% [%] Loading time
More informationThis page outlines some of the alternate pieces that can be used for building.
Artbotics Exploring Mechanisms with Lego Mindstorms EV3 This packet contains information on each mechanism you will be using, including a to-scale image of all of the pieces needed to build each one and
More informationRoof Truss Roller Press, Tables and Jigging
RoofTracker II Roof Truss Roller Press, Tables and Jigging August 2015 Page 1 Table of Contents Equipment Introduction to the Equipment Restricted Zone Truss Terminology Parts of a Truss Important Notes
More informationOptoPulse EIL580. The benchmark for incremental encoders.
OptoPulse EIL580 The benchmark for incremental encoders. OptoPulse EIL580 the established standard. OptoPulse EIL580 sets a benchmark in incremental encoders with 58 mm diameter. Cutting edge sensing technology
More informationEnhanced Performance of a Slider Mechanism Through Improved Design Using ADAMS
Enhanced Performance of a Slider Mechanism Through Improved Design Using ADAMS (Nazeer Shareef, Sr. R&D Engr., BAYER CORP., Elkhart, IN) Introduction Understanding of the influence of critical parameters
More informationHP ENTERPRISE FLOW MFP M630
HP ENTERPRISE FLOW MFP M630 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS HP CF281A & CF281X TONER CARTRIDGES REMANUFACTURING THE HP ENTERPRISE FLOW MFP M630 TONER CARTRIDGES By Mike Josiah and the Technical
More informationM U L T I M E D I A S T O R A G E
M U L T I M E D I A E X T R E M E S T O R A G E 2550 West Midway Bouleva r d B r o o m f i e l d, Colorado 80020 (303) 465-2800 Sales Line (800) 432-1EDP Order FAX (800) 456-3480 Engineered Data Products
More informationNext Generation StorageTek Tape Drive: T9840C. James Cates Robert Raymond
Next Generation StorageTek Tape Drive: T9840C James Cates Robert Raymond StorageTek Tape Drives - A CHOICE Customers have a need for two different types of drives, which are ideallysuited for two different
More informationMECATRONIC EQUIPMENT FOR BEARING RING SURFACE INSPECTION
MECATRONIC EQUIPMENT FOR BEARING RING SURFACE INSPECTION Daniela Cioboata 1, Octavian Dontu 2, Daniel Besnea 2, Robert Ciobanu 2, Adrian Soare 3 1 The National Institute of Research and Development in
More informationtransforming mid-capacity processing Lines with breakthrough technology. INTRODUCING VerTex660
transforming mid-capacity processing Lines with breakthrough technology. INTRODUCING VerTex660 > Superior product texture > Exact weight portion control > Unmatched versatility > Lowest cost of ownership
More informationPRECISION SURFACE GRINDING MACHINE
PRECISION SYSTEM 1 PRECISION SURFACE GRINDING MACHINE ACC 350 II Features : Powerful for precision grinding small component with minute, intricate like mold & die, jig & fixture etc. Operator centered
More informationRemoval and Installation 8
Removal and Installation 8 8 Introduction 8-2 Service Calibration Guide to Removal and Installation 8-4 Window 8-8 Covers and Trims 8-12 Rear Tray 8-31 Rear Cover 8-32 Media Lever 8-33 Media Lever Position
More informationDesign of Modern Concept Tribometer with Circular and Reciprocating Movement
N. MARJANOVIC, B. TADIC, B. IVKOVIC, S. MITROVIC Design of Modern Concept Tribometer with Circular and Reciprocating Movement RESEARCH This paper considers construction and advantage of modern tribometer
More informationfrom module to cloud Linear Motion Technology IoT-Gateway IT and Cloud Solutions and everything in between
Automation from module to cloud Linear Motion Technology IoT-Gateway IT and Cloud Solutions and everything in between 1 Componets to Systems Components and customized products 2 Annealed Straightened Machined
More informationProduct Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
More informationsamos PRO MOTION SAFE MOTION Safe Speed, Direction and Position Monitoring for Machines and Plants.
samos PRO MOTION SAFE MOTION Safe Speed, Direction and Position Monitoring for Machines and Plants. 2. samos PRO MOTION SAMOS PRO COMPACT PLUS MOTION LIBRARY. Integrated + programmable + intuitive. SAFE
More informationManipulator Path Control : Path Planning, Dynamic Trajectory and Control Analysis
Manipulator Path Control : Path Planning, Dynamic Trajectory and Control Analysis Motion planning for industrial manipulators is a challenging task when obstacles are present in the workspace so that collision-free
More informationMX80S Ballscrew and Leadscrew Driven Stages
Miniature MX80S Features MX80S Ballscrew and Leadscrew Driven Stages Features Miniature Size - Low Profile (35 mm high X 80 mm wide) Normal or cleanroom environments 25, 50,, 150 mm travels Multi-axis
More informationM3-LS Linear Smart Stage All-in-one USB micro stage
SMALL, PRECISE, SMART IN MOTION M3-LS Linear Smart Stage All-in-one USB micro stage All-in-one smart module: no separate electronics - Runs directly from USB adapter - USB, I 2 C or SPI interface Small
More informationKinematics of Machines. Brown Hills College of Engineering & Technology
Introduction: mechanism and machines, kinematic links, kinematic pairs, kinematic chains, plane and space mechanism, kinematic inversion, equivalent linkages, four link planar mechanisms, mobility and
More informationASSIGNMENT , The feedback signal in the velocity transducer servo circuit performs which of the following functions? 12-1.
ASSIGNMENT 12 Textbook Assignment: Magnetic Disk Storage, chapter 10 Continued, pages 10-21 through 10-33; and CD-ROM Storage, chapter 11, pages 11-1 through 11-7. 12- The velocity transducer in a disk
More informationVJ-1604 INSTALLATION MANUAL
Please read this manual before using Thank you for purchasing a MUTOH product. This manual explains the steps for unpacking, mounting and basic installation before using the MUTOH Full-color inkjet printer
More informationElectrical Motor Controls. Chapter 11 (4 th Edition) Chapter 6 (5 th Edition)
Electrical Motor Controls Chapter 11 (4 th Edition) Chapter 6 (5 th Edition) 1. What are the three parts of an industrial pushbutton? 2. What color legend plate is typically used for an emergency stop
More informationDigital Express. Reliable turnkey solutions for any application requiring value, performance and versatility. multicam.com
Digital Express Reliable turnkey solutions for any application requiring value, performance and versatility. multicam.com 1 HIGH PERFORMANCE......MADE AFFORDABLE DIGITAL EXPRESS The MultiCam Digital Express
More informationLION PRECISION. Application Note. Thickness Measurement With Noncontact Sensors. LA June, Applicable Equipment: Applications: Summary:
LION PRECISION Application Note LA05-0021 June, 2013 Thickness Measurement With Noncontact Sensors Contents Single-Channel Method 2 Basic Single-Channel Procedure 2 Applicable Equipment: Lion Precision
More informationDevelopment of the Compliant Mooring Line Model for FLOW-3D
Flow Science Report 08-15 Development of the Compliant Mooring Line Model for FLOW-3D Gengsheng Wei Flow Science, Inc. October 2015 1. Introduction Mooring systems are common in offshore structures, ship
More informationSDG1400 User s Guide
SDG1400 User s Guide Model SDG1400 Rate Sensor Systron Donner Inertial Sales and Customer Service Phone: +1 925.979. 4500 Fax: +1 925.349.1366 E-Mail: sales@systron.com www.systron.com SDG1400 User s Guide
More informationSelection can be made from different capacities (ranging from 100kN to 2000kN) from HL 590 / HL590 (FL) series or HLC 591 / HLC 591 (FL) series.
Universal Testing Machines UNIVERSAL TESTING MACHINE HEICO UTM is suitable to conduct following tests - (i) Compression (ii) Tension (iii) Transverse (iv)bending (v) Shear (vi) Hardness and many others
More informationThe HP CLJ 3000/3600/3800 Toner Cartridge
The HP CLJ 3000/3600/3800 Toner Cartridge By Mike Josiah and the Technical Staff at Summit Technologies First released in October 2005, the HP-3600 series of color laser printers are based on a 17/22 ppm
More informationRocket Activity Pop! Rockets
Rocket Activity Pop! Rockets Objective Students design, construct, and launch paper rockets. Description A rocket with a triangular cross section is made from three rocket-shaped strips of card-stock paper
More informationHP 2300 LASERJET PRINTER
AbsoluteCOLOR AbsoluteBLACK UniDrums UniRollers UniParts UniCoatings AbsoluteCOLOR AbsoluteBLACK UniDrums UniRollers UniParts UniCoatings HP 2300 REMANUFACTURING INSTRUCTIONS HP 2300 LASERJET PRINTER HP
More informationSelection of controllers and integrated systems
maxon motor: Selection of controllers and integrated systems 2017 maxon motor ag maxon_control-system-selection, WJ, Animated Version V2.31 Criteria to find the base drive controller family Base criteria
More informationMACHINES AND MECHANISMS
MACHINES AND MECHANISMS APPLIED KINEMATIC ANALYSIS Fourth Edition David H. Myszka University of Dayton PEARSON ж rentice Hall Pearson Education International Boston Columbus Indianapolis New York San Francisco
More informationNavier-Stokes & Flow Simulation
Last Time? Navier-Stokes & Flow Simulation Pop Worksheet! Teams of 2. Hand in to Jeramey after we discuss. Sketch the first few frames of a 2D explicit Euler mass-spring simulation for a 2x3 cloth network
More informationError Budget as a Design Tool For Ultra-Precision Diamond Turning Machines Form Errors
Error Budget as a Design Tool For Ultra-Precision Diamond Turning Machines Form Errors Mark Walter, Bruce Norlund, Robert Koning, Jeff Roblee, Precitech, Inc. Keene, NH 3431 USA Abstract This paper describes
More informationBall Bearings for Hard Disk Drives
Ball Bearings for Hard Disk Drives M. MUKASA Performance of hard disk drives (HDD) has been improved remarkably in the past three or four years. Memory capacity of HDD has increased from 1GB to 2 ~ 3GB.
More informationCOLOR LASERJET CP5225 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
HP COLOR LASERJET CP5225 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS HP CP5225 TONER CARTRIDGE REMANUFACTURING THE HP COLOR LASERJET ENTERPRISE CP5225 SERIES TONER CARTRIDGES By Mike Josiah and the Technical
More informationSeries 062 Bus Bar Connectors
Series 062 Bus Bar Connectors Application Specification 114-2130 22 DEC 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
More informationApplications: MultiCam Graph-X-Cutter Feature and Specification Guide
MultiCam Graph-X-Cutter Feature and Specification Guide Affordable High-Speed Digital Finishing System The MultiCam Graph-X-Cutter is an extremely flexible high-speed CNC finishing system. It combines
More informationPCB Assembly System Set Up for Pop. Gerry Padnos. E mail: smt.com
Juki Automation Systems, Inc 507 Airport Blvd. Morrisville, NC 27560 (919) 460 0111 www.jukiamericas.com Gerry Padnos PCB Assembly System Set Up for Pop Gerry Padnos Juki Automation Systems, Inc., 507
More informationTHE HP 4700/4730 AND CP4005 BLACK AND COLOR TONER CARTRIDGES
THE HP 4700/4730 AND CP4005 BLACK AND COLOR TONER CARTRIDGES DOC# 0385 By Mike Josiah and the Technical Staff at Summit Technologies HP 4700/4730 AND CP4005 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
More informationElectromechanical Materials Testing Machines EM0 series
MICROTEST Electromechanical Materials Testing Machines EM0 MICROTEST - Electromechanical Materials Testing Machines EM0 series MICROTEST MICROTEST, S.A. Instruments and Equipments for Materials Testing
More informationRemanufacturing the Brother HL-1240 OPC (Drum) Cartridge (DR-400, DR-6000)
Remanufacturing the Brother HL-1240 OPC (Drum) Cartridge (DR-400, DR-6000) These instructions cover the recycling of the Brother DR-400 OPC cartridge used in laser printers and plain paper fax machines
More informationSMALLER SBD15-60 SIZE NEW. HepcoMotion NOW AVAILABLE. SBD Sealed Belt Drive
NEW SMALLER SD15-60 SIZE NOW AVAILALE HepcoMotion SD Sealed elt Drive Introduction The HepcoMotion SD is an exceptionally rugged, quiet and precise linear unit. It uses super-smooth Hepco LG caged linear
More informationPHYSICS 1040L LAB LAB 7: DIFFRACTION & INTERFERENCE
PHYSICS 1040L LAB LAB 7: DIFFRACTION & INTERFERENCE Object: To investigate the diffraction and interference of light, Apparatus: Lasers, optical bench, single and double slits. screen and mounts. Theory:
More informationGEAR DESIGN SOLUTIONS
GEAR DESIGN SOLUTIONS Release 5.0 2012 Dontyne_Brochure2012.indd 2 28/08/2012 09:59 Dontyne SyStems Dontyne Systems offers software and services aimed at the optimum production of gear components and their
More informationTV & Office Solutions by equip solutions with a high value of benefit
TV & Office Solutions by equip solutions with a high value of benefit The brand equip stands for a product development driven by quality management and continuous adjustments to the requirements of the
More informationP R E S E T T E R C A T A L O G
PRESETTER CATALOG E238 PRESETTERS (LYRA, PULSAR & ARA MODELS) MECHANICAL FEATURES Axes Movement: Manual Rapid Traverse for Continuous Micro- Fine Adjustment by Wormscrew Measuring Range: X-Axis - 140 mm
More informationImation. TravanTM TECHNOLOGY. Reliable, high-capacity data protection for workstations and entry-level server environments
Imation TM TECHNOLOGY Reliable, high-capacity data protection for workstations and entry-level server environments Data Cartridges technology has established a solid heritage of affordability, reliability,
More informationCyrostat Design -Camera Section Justin Holwell
Cyrostat Design -Camera Section Justin Holwell July 6 th, 2004 JLH 1 Camera Dewar 3D Layout JLH 2 Camera Dewar X-Section JLH 3 Camera Components Lens Mounts 12 Lens Cells and 2 Mounts Grism Assembly 2
More information