Components for Telecommunications

Transcription

1

2

3 Components for Telecommunications Touch Panels Board to Board Connectors Board to Wire Connectors Battery Connectors RF Coaxial Connectors RF Coaxial Connectors with Switch Multi Pin Connectors with Coaxial Interface Connectors Camera Module Sockets Memory Card Connectors SIM Card Connectors FPC Connectors Earth Terminals.5mm Dia. Jacks.5mm Dia. Jacks DC Power Supply Plugs/Jacks Switches Units Modules Custom Made Products

4 Product Index by Features Thin Type, Small Type l Low Profile, Small Type of H=mm, D=.mm Board to Board Connector... l Small Type, Narrow Pitch (0.5mm) Board to Board Connector... l Low Profile of H=.9mm, mm Pitch Interface Connector... l Low Profile of H=0.9mm, Wire to Board Connector (Extremely Small Usage)... l Low Profile of H=.mm, Crimp Connector (Extremely Small Usage)... l Low Profile Battery Connector Snake Type... l Downsizing Spring Contact Jack... l mm Height, Thin Type Horizontal Switch Middle Mount RF Coaxial Components l Internal RF Coaxial Connectors.0mm height when mated. Low Profile Coaxial Connector... Coaxial Connector (GHz)... l External RF Coaxial Connectors Coaxial Connector with Switch, Small Type / Thin Type... l Variation of Antennas... 8 User Interfaces l Variation of Touch Panels Capacitive Touch Panel... Film / Glass Touch Panel... Decoration Touch Panel... Glass / Glass Touch Panel... l Capacitive Switch High Durability, High Strength l Operating Life :,000,000 cycles, Thin Type Horizontal Switch... Water Proof l Custom Made Products (Battery Pad)... 9

5 Touch Panels Resistance Sensitive Touch Panel Film / Glass Type Film on glass structured touch panels. The size and transparency can be custom designed. Using a special thin glass plate achieved 5mm (min.) thick. Resistance Sensitive Touch Panel Glass / Glass Type Glass on glass structured touch panels. Using a polarized film can meet low reflection. Resistance Sensitive Touch Panel Film / Film Type Using a film for both upper and lower electrodes realized thin and light. These touch panels are never cracked even when it's dropped. The adhesion of glass or plastic support plate is available. Resistance Sensitive Touch Panel Decoration Type The bezel-free flat finish is achieved. A full-flat finish is resistant to dust and drops of liquid. Variations of film/glass type and film/film/support plate type are available. The various design request of appearance is met.

6 Capacitive Touch Panel A projected capacitive touch panel. Multi touch and gesture input such as page scrolling is possible. The adhesion of glass or plastic decoration plate is possible. High transparency (9%) is realized. Board to Board Connectors 0.5mm Pitch (PB-5 Series) mm height when mated and.mm width. Added mating strength due to locking mechanisms of hold down. Socket : CPB -050F Plug : CPB -050F A+.85=C (n/-)x0.5=a A+.8=C (n/-)x0.5=a 0.5 (Mating height : mm) mm Pitch (PB-A Series) mm height when mated and.mm width. Added mating strength due to locking mechanisms of hold down. Nickel barrier plating can prevent 'solder rise'. (Mating height : mm) Socket : CPB7-050F Plug : CPB7-050F A+.7=C A+=B (n/-)*=a A+.5=C A+5=B (n / )X=A..9 (Mating height : mm) mm Pitch (PB-B Series).mm height when mated and.7mm width. Added mating strength due to locking mechanisms of hold down. Shield is also available (socket). A+.=B (n / )X=A (Mating height : mm) Socket : CPB -00F Plug : CPB -00F A+.=B (n / )X=A Vacuum area () (Mating height :.mm) (Mating height :.mm) 7

7 Socket : CPB -00F A+.=B (n / )X=A mm Pitch (PB-F Series) mm height when mated and.mm width. Added mating strength due to locking mechanisms of hold down. Socket : CPB07-050F Plug : CPB08-050F A+.85=C (n / )X=A.5 A+.8=B (n/-)x=a 8..9 Board to Wire Connectors P Wire to Board Connector, ID-0 Series Low profile of.mm height and.0mm pitch when mated. Resistant to vibration and shocks when dropped and highly reliable due to a -point contact structure. Receptacle : CFX0-00F Plug : CFX0-00F π5..7. (Mating height :.mm/with shield).8 8

8 P Wire to Board Connector, ID-0 Series Low profile of 0.9mm height and 5mm pitch when mated. Resistant to vibration and shocks when dropped and highly reliable due to a double contact structure. Receptacle : CFX0-00F Plug : CFX0-00F Low profile of.75mm height when mounted. Apply an AWG, mm (jacket inclusive) dia. cable. Terminal : CTA5-0F Plug : CPL0-00F Housing : CPL0-00F A P Crimp Connectors SECTION A-A MATING SECTION A-A A. 5.5 P Crimp Connectors Low profile of.mm height when mated. Apply an AWG to 0, 0.98 to mm (jacket inclusive) dia. cable. Terminal : CTA-50F Plug : CPL550-00F Housing : CPL0-0F 5 PinNo MAX PinNo

9 Battery Connectors Low Profile Battery Connector Low profile of.0mm height. High level contact reliability and shock resistance performance is enhanced from the double contact structure. CSS505-00E Small and Low Profile Battery Connector Leaf type and low profile of.8mm height. Small design of.5mm pitch terminal. CSS500-8P0F (π.) (0.5) (7) (0.5) () (0.).5 TC-5 Series (GHz) Receptacle : CRS500-0F Plug : CRC900-0F CSS500-8PF (π.) (0.5) (7) (0.5) ()...9 (π) () 5 8 RF Coaxial Connectors 5.mm height when mated. Applicable cable mm dia (.85)

10 TC- Series (GHz).85mm height when mated. Applicable cable.mm dia. Receptacle : CRS500-00F. Plug : CRC F (.85) π (π.) TC-7 Series (GHz).0mm height when mated. Applicable cable : mm dia, mm dia. Receptacle : CRS500-0F Plug : CRC900-0F.7 (.85) π (π) RF Coaxial Connectors with Switch TS-5 Series (.5GHz) Receptacle : CRS500-70F Receptacle : CRS500-0F Common Normal close Normal close Common (Type-A) (Type-B) Plug : CRC900-0F.85.5 π5.8 (π.0).9.0. π. π

11 TS-7 Series (GHz) Receptacle : CRS500-00F π. 5.9 (.5) Plug : CRC900-9 F Plug : CRC900-00F L L 8.0 (π.0) (7.5) π7. π. π8.0 π. π 7. (Probe Type) TS-8 Series (GHz) Receptacle : CRS500-0F π Low profile of mm height when mounted..5 Plug : CRC900-80F π. π.5 7. π (Mating Type) L L Note 0 5 () Standard 0 0 (8) (π.5) (.0) π.7

12 TS-9 Series (GHz) For external connection. Operating Life : 5,000 cycles Receptacle : CRS500-70F (.85) (On Board Type)..95 π.5 Receptacle : CRS500-50F (.85).0. Plug : CRC900-50F π.5 (π.0) π. π Plug : CRC900-80F π.5 π. (π.) (Middle Mount Type) (.) π.5 (RF Inspection) (π.0) (External Connection)

13 TS-0 Series (GHz) Receptacle : CRS500-0F. - π. The PWB occupancy area is only.8mm space saving type..7 (.0) Plug : CRC900-80F Plug : CRC900-90F TS-0 (π.7) (9.55).5.5 π.0 7. π7. π.8 π (7.5).5. TS- Series (GHz) Receptacle : CRS500-0F...7. SMA(J) SIDE /-UNS-A.0 π8.0 TS-0 7. (Mating Type) TS-0 SIDE π. (Probe Type) π. Low profile of 0.95mm height when mounted (.MAX.) Plug : CRC900-0F Plug : CRC900-0F (π.7) TS (9.55) SMA(J)SIDE /-UNS-A.5.5 π.0.7 π7. π π (7.5).0 π8.0 TS- 7.. (Mating Type) TS- SIDE π. (Probe Type)

14 Multi Pin Connectors with Coaxial DI-5 Series (For cdmaone) Low Profile Type Receptacle : CSS508-0M0F 0.5. () (.8) () (.9) Middle Mount Type Receptacle : CSS508-0S0F () -(π.) Vacuum area (.8). () 8.. (-) 7().9 7 7() -() (.95) (0.) Middle Mount Type Receptacle : CSS508-P0F () ( π.8) Vacuum area. (9.) () 0 (.7) (.7) Plug : CSC00-E0F Plug : CSC08- F (Half Locking) () 0..5 Identification mark (Full Locking)

15 DI-7 Series (For IMT-000) Standard Type / Middle Mount Type Receptacle : CSS500-AF Receptacle : CSS500-F0F () (.7) (5.)..5 Half Locking Structure / Full Locking Structure Plug : CSC00-7C0F Plug : CSC00- F.5 No (0)..5 No (Pitch) (Half Locking) (Full Locking)

16 Interface Connectors P Interface Connectors Receptacle : CSS50-5C Plug : CSC (.) P Interface Connectors Receptacle : CSS508-8S0F Plug : CSC08- F (π. : Vacuum area) P Interface Connectors Receptacle : CSS F Plug : CSC0-099F Plug : CSC0-9C0F π8.5 (.5) (.) Xπ(Hole).8 0 8X.5 mm Pitch, Small Type (.9mm Height)

17 Micro-USB B Type Connectors Conforms to the USB specifications (USB High-Speed). Receptacle : CSS5005-9H0F 7.5 Receptacle : CSS5005-R0F () (DIP Normal Type) HDMI Type C Receptacle SMT : CSS509-R F DIP : CSS509-0R F () () 5 ().85 (5) (SMT Normal Type) Receptacle : CSS505-00F π(vacuum area) 7.5 Receptacle : CSS F (π : Vacuum area).max (.5).5 () min. (.8) min. 0.7min min. No..75 (8).9..5max (DIP Normal Type) () 5 (5) 5. No () (.8) min No max..9 (DIP Reverse Type) (). No min 0.min. PIN No.9 X8=7. PIN No. PIN No.9 X8=7. PIN No Center part.5 Both sides Center part.5 Both sides -. (.)

18 0P Rectangular Interface Connectors, CR-0 Series Conforms to JEITA RC-50. Standard Type/Depth.mm Contact Shell Normal Reverse CSS500-0F CSS500-90F SMT CSS500 - F -9 F CSS500-0F CSS500-90F Receptacle : CSS500-. CONTACT No CONTACT No.0.5 (CONTACT No.-9).5 (CONTACT No.,0) F DIP CSS500 - F -5 F Boss CSS500-0F CSS500-0F CSS500-50F CSS F without 0 with Short Type/Depth 5.mm Contact Shell Normal Reverse CSS500-9L0F CSS500-8L0F SMT CSS500-9L F -8L F CSS500-9L0F CSS500-8L0F Receptacle : CSS CONTACT No CONTACT No F.5 (CONTACT No.-9).5 (CONTACT No.,0) DIP CSS500 -H F -8G F Boss 0 without 0 with CSS500-H0F CSS500-H0F CSS500-8G0F CSS500-8G0F 9

19 Middle Mount Type Receptacle : CSS500-L F Receptacle : CSS500-K F C:.9mm 7.mm (.9) C (Normal Type) (Reverse Type) Plug : CSC00-050F (0.).05.. Camera Module Sockets SMIA95, SMIA85 and SMIA5 specifications compliant. Highly reliable contact and locking structures. Ensured grounding contact of a module and a socket. Designed for ensured shielding performance. SMIA (Standard Mobile Imaging Architecture) is a standard proposed by NOKIA and ST Micro electronics. 0

20 Memory Card Connectors Push (lock) / push (eject) and push (lock) / pull (eject) system for card. Customizable to varying customer needs including combination with other products. microsd Card Connector Hinge type CLE F.5 (SLOT C.L.) 0. A (HOUSING HEIGHT).5 VACUUM AREA MIN (EDGE OF CARD) (5) (COVER HEIGHT).8 Low profile of.5mm height when mounted. microsd Card Connector With detector switch CLE908-0F Hinge Type Pin# 5 Pin# Pin# 7 Pin# 8.5MIN. A (.5). Pin# Pin# Pin# (SECTION A-A) Pin# microsd Card Connector CLE F (.85) (PROJECTION AREA) 5..5 (CARD IS INCLUDED) (5.). (.85).9 Low profile of.5mm height when mounted. Push-Pull Type.5 Low profile of.7mm height when mounted. Memory Stick Micro (M) Connector CLE9-00F apush-pull Type.5.9 Mating position 0.9 Pushing position Low profile of.95mm height when mounted. Push-Push Type.9.5 Deflection of half lock (0.).8 Insert Position / M CL Eject position.5 Connector H=.95 M CL Eject position. 5

21 SIM Card Connectors Conforms to GSM.. types of pins and 8 pins. Customizable to varying customer needs including provision of a tray. CLE00-0F (.58) SIM Card insertion direction Low profile of.55mm height when mounted. CLE00-0F 5MIN SIM Card.5 (.95) insertion direction Low profile of.5mm height when mounted. (.5)..5 CLE00-70F (.58).5 9 SIM CARD INSERTION DIRECTION Low profile of.5mm height when mounted. SIM CARD.5. CLE00-80F. Height :.75mm ( Tray Type) <CARD> (9.5) <CARD>(5.5) EJECT POSITION <CARD> 5.8 Inserting and ( ) pulling out tray -MAX0. SLIDE LENGTH (9.5) MATING POSITION (TRAY WOBBLING) MAX..75.

22 CLE00-0F Side Insertion Type CLE00-09F 7. (Slot) (Pushed position) () (Ejected position) () (Mated position) (.8) Low profile of.mm height when mounted. Push-Push Type 7 5. SIM / microsd TM Card Combo Connector Combo connector usable for both SIM / microsd cards. CLE9-5790F SIM CARD

23 FPC Connectors 0.mm Pitch (EC-LP Series) Easy Flip Lock Type Our exclusive easy flip lock system. Low profile of 5mm height when mounted. A range of 7, and pins. CFP79-00F (n-)x0.=a 0. Vacuum area (.) 0. () (.) 5. A+.=C A+=B 5 Mating style mm Pitch (EN- Series) Low profile of.mm height when mounted. Fast transmittable with performance being equally good to that of micro coaxial. CFPA5-050F (A+.9)=B 5 A 0. ( )X0.=A 0.mm Pitch (EN- Series) Low profile of mm height when mounted. Fast transmittable with performance being equally good to that of micro coaxial. CFPA -050F A+.5=B (π) ( )x0.=a 0. mm Pitch (EN- Series) Low profile of mm height when mounted. Adopted our exclusive locking mechanism intended to improve assembly workability. CFPA7-050F 8. (π).8

24 Earth Terminals Contributes to light weight and compact size. Suitable for use with conductive painted molded terminals. ET- Series / 5CSS-00-5F Single Contact Design Height :.0mm Stroke : 0.mm (max. mm) Contact Pressure : 0.5±0.N Under Plating : Nickel Finish : Au Plating Reel : 0,000pcs/reel ET- Series / 5CSS-08-5F Single Contact Design Height :.0mm Stroke : 0.mm (max. mm) Contact Pressure : 0.±0.N Under Plating : Nickel Finish : Au Plating Reel : 0,000pcs/reel (0.9) ET- Series / 5CSS F Double Contact Design Height :.7mm Stroke : mm (max..0mm) Contact Pressure : N Under Plating : Nickel Finish : Au Plating Reel : 5,000pcs/reel () - ET- Series / 5CSS-098-5F Double Contact Design Height :.7mm Stroke : mm (max..0mm) Contact Pressure : 0.5±0.5N Under Plating : Nickel Finish : Au Plating Reel : 5,000pcs/reel (). (.5) ET-5 Series / 5CSS-78-50F (.8) Single Contact Design Height :.mm Stroke : 0.mm (max. 0.mm) Contact Pressure : ±0.5N Under Plating : Nickel Finish : Au Plating Reel : 0,000pcs/reel ET- Series / 5CPB-07-5F Single Contact Design Height :.mm Stroke : 0.mm (max. mm) Contact Pressure : 0.±0.N Under Plating : Nickel Finish : Au Plating Reel : 7,000pcs/reel Max

25 ET-7 Series / 5CPB-07-50F Single Contact Design Height :.mm Stroke : 0.mm (max. mm) Contact Pressure : 0.±0.N Under Plating : Nickel Finish : Au Plating Reel :,000pcs/reel ET-8 Series / 5CPB F (π) Vacuum area (.5) Single Contact Design Height :.mm Stroke : 0.mm (max. mm) Contact Pressure : ±0.N Under Plating : Nickel Finish : Au Plating Reel : 0,000pcs/reel Contact area Soldering area. (.) ET-9 Series / 5CPB-09-50F Single Contact Design Height : 0.95mm Stroke : 0.mm (max. mm) Contact Pressure : ±0.5N Under Plating : Nickel Finish : Au Plating Reel : 0,000pcs/reel (π) Vacuum area Contact area Soldering area 0. (.7) ET-0 Series / 5CPB-09-50F Single Contact Design Height :.mm Stroke : 0.mm (max. 5mm) Contact Pressure : ±0.N Under Plating : Nickel Finish : Au Plating Reel : 8,000pcs/reel (π) Vacuum area Contact area Soldering area (.55) Low Profile Type / 5CSS-5-5F Single Contact Design Height : mm Stroke : 0.mm (max. 5mm) Contact Pressure : 0.5±0.N Under Plating : Nickel Finish : Au Plating Reel : 0,000pcs/reel (5.8).9 (.) max. Through Board Type / 5CSS-0-50F Single Contact Design Height : mm Stroke : 5mm (max. mm) Contact Pressure : 0.±0.N Under Plating : Nickel Finish : Au Plating Reel : 0,000pcs/reel () : Contact area : Working position π. : Vacuum area.

26 .5mm Dia. Jacks Compact, light weight and space saving. Anti-prying force provision. LGK709-0F,000pcs/reel LGK009-00F max..5 LGK50-00F LGK F.5 ø ,000pcs/reel,000pcs/reel 500pcs/reel (Terminal position range) ø ( Pins Type S) 7

27 SA Series ( Poles) Two types are available break switch (Type B) and make switch (Type M). Compatibly usable with a mono earphone/microphone combination. LGK09-00F 500pcs/reel (Type B) LGK08-080E 8. ø5. ø xø. (Type M) LGK508-00F,000pcs/reel Thin type of.mm height. LGK908-00F 900pcs/reel π π

28 Plug : LLP07-000F Soldering max Plug 0 7.Max..5mm Dia. Jacks LGY09-00F π5.5 π (TERMINAL POSITION RANGE) LGY09-000F π5.5 π.... LGY09-000F π5.5 π.... LGK09-70F π5.5 π.... 9

29 LGY F 7.5 Max. 5.5 π5.5 π. LGY09-00F (Terminal position range) π5 π. LGY09-080F π. π5..7. Edge Mount Type LGY00-0F π5 π. 0.9 Low profile of.mm height when mounted. 7. Edge mounting system : A mounting system where part of PWBs is cut off to have a part being mounted-jack, in this case-to sit. Spring Terminal Type LGY09-000F ø ø. 5 Spring tarminal system : The terminal is formed into spring shape and mounting method is to push the terminal to the PWB when incorporating into the set equipment. 0

30 DC Power Supply Plugs / Jacks Voltage Classification LGP8-00F.8.8. ø5.8 max ø LGP8-000F ø ø.75.5 (SMD Type) Voltage Classification LGP-00F (Through Hole) LGP-000F ø ø.5 ø ø Small DC Jack (Through Hole Type) LGP-0500F Small DC Jack (SMD Type) LGP-00F (SMD Type) (Discrete Type) Plug LLP00-89F 9. (Inside diameter)

31 Switches Small Horizontal MT Switches The PWB occupancy is.8mm the industry's smallest class.. JPM990- F,000pcs/reel.9.5 (.5) (With Boss) : Embossed Taping Pack Part No. JPM990-5 F.,000pcs/reel..7 (5).5 (.5) (Without Boss).9 : Embossed Taping Pack Part No. JPM990-9 F Delivery will be made on embossed tape. Thin Type Horizontal MT Switches The height of this switch is.mm the industry's shortest class..5. 5,000pcs/reel (With Boss) 0.5 π5 π : Embossed Taping Pack Part No. JPM F.5. 5,000pcs/reel 0.05 ( R area) (Without Boss) 0.5 Delivery will be made on embossed tape. : Embossed Taping Pack Part No.

32 JPM990- F ,000pcs/reel (Operation center) 0±0.0(Coplanarity). ( Middle Mount Type) Small Slide Switches, JSD Series Low profile of 0.9mm height. JSD00-0 F. CL A C B.9 (0.) : Embossed Taping Pack Part No. 5,000pcs/reel.5 (Horizontal Type).9 JSD0-0 F 5,000pcs/reel (Vertical Type) Long Life Small Slide Switches A long life of 00,000 cycles. Low profile of.mm height. JSS0-080F 8.5(.5X) C.L (Travel) (Horizontal Type) JSS0-090F 8.5(.5X) C.L (Travel) Travel (x.5).5 : Embossed Taping Pack Part No Travel. : Embossed Taping Pack Part No.,000pcs/reel : Embossed Taping Pack Part No.,500pcs/reel (Vertical Type). : Embossed Taping Pack Part No. Delivery will be made on embossed tape.

33 Switches Momentary Slide Switches JSS 0-0. JSS0-0 (SPT),000pcs/reel. JSS0-0 (SPT),000pcs/reel One Side Momentary Slide Switches, JSS Series The stroke is.5±0.5mm. JSS0-0 F,500pcs/reel.5.9 Initial position:.5 ON stroke:.9 Full stroke: (Left Direction) 9.8 () The stroke is.5±0.5mm. JSS0-0 F,500pcs/reel b.5.9 Initial position:.5 ON stroke:.9 Full stroke: ( Direction) 9.8 () One Side Lock and Momentary Slide Switch JSS0-0 F (Travel) Momentary (Travel) Momentary : Embossed Taping Pack Part No : Embossed Taping Pack Part No. : Embossed Taping Pack Part No. : Embossed Taping Pack Part No. max.,000pcs/reel.5 TRAVEL:.7 TRAVEL:.5 Momentary. (0.) (0.) : Embossed Taping Pack Part No.

34 Switches One Side Momentary Slide Switches, Low Profile Type Low profile of.mm height. JSS0-05 F ,000pcs/reel.5.. (ON stroke) (Full stroke).(initial position).5 (Left Direction). : Embossed Taping Pack Part No. JSS0-0 F ,000pcs/reel (ON stroke).(initial position) (Full stroke) ( Direction). (0.5) : Embossed Taping Pack Part No. Dome Switches A thin design is realized due to the employment where no parts such as key stems are used. JPM990-70F / 5 F (0.9),500pcs/reel 8 () (.).5. (.5).5 DATUM Push center position (π.) () (0.) JPM990-50F,500pcs/reel 8 () (0.) 0.9 π.5(dome). (π) (.5).7.5 (Without Cover) (π) Recomend push area PWB Surface 5

35 Dome Switch JPM990- F,000pcs/reel.max 0.9 Key Recommended push area π 5. () () () Key A..8 O.P.side : Embossed Taping Pack Part No. Small Detector Swtiches, DSJ Series (Vertical Type) JPS0- F.5 (.5)...9 π Total Travel Position.5 MAX On or Off Position.,000pcs/reel.5 Free Position. (.5) (.) 5.5 (X) (X) (X) C B Total Travel Position Free Position..9.5 MAX,000pcs/reel On or Off Position..5 Variation : Embossed Taping Pack Part No. Part No. Operating System Boss JPS0- JPS0- JPS0- JPS0- F F F F Push-on Push-on Push-off Push-off With Without With Without Small Detector Switches, DSI- Ultra thin type of mm height on PWB. Series (Horizontal Type) JPS0- F π ,000pcs/reel OFF start position () OFF start position -π ,000pcs/reel (5) OFF start position Operating direction. (.) (.). B A Operating direction OFF start position Variation : Embossed Taping Pack Part No. Part No. Operating System Boss Lever Direction JPS0- JPS0-5 JPS0- JPS0-7 JPS0-8 JPS0-9 JPS0-70 JPS0-7 F F F F F F F F Push-off Push-off Push-off Push-off Push-on Push-on Push-on Push-on With With Without Without With With Without Without Left Left Left Left

36 Small Detector Switches, DSI- JPS0- F Series Operation direction can be detected in directions of vertical and horizontal. The on-stroke is as long as mm. Operating direction.5 -π ,000pcs/reel ON start position (.)..5 Operating direction.5 π. 5.. ON start position (.) (0.95) R0. 5 5,000pcs/reel.7 (.) (.) Variation Part No. JPS0-0 JPS0- JPS0- JPS0- JPS0-8 JPS0-0 JPS0- JPS0- JPS0- JPS0-7 JPS0-8 JPS0-9 JPS0-50 JPS0-5 JPS0-5 JPS0-5 F F F F F F F F F F F F F F F F Operating System Push-on Push-on Push-on Push-on Push-on Push-on Push-on Push-on Push-off Push-off Push-off Push-off Push-off Push-off Push-off Push-off Lever Width Standard Standard Standard Standard Wide Wide Wide Wide Wide Wide Wide Wide Standard Standard Standard Standard Terminal Shape J-Lead J-Lead L-Bend L-Bend J-Lead J-Lead L-Bend L-Bend J-Lead J-Lead L-Bend L-Bend J-Lead J-Lead L-Bend L-Bend Boss With Without With Without With Without With Without With Without With Without With Without With Without Lever Direction : Embossed Taping Pack Part No. Capacitive Switch The thinness is.0mm and is very thin, and is small with the exterior sizes of mmxmm. Low power consumption for small mobile equipment. A 0 degree operation is possible by equipping the push switch in the center. The CV conversion IC is prepared as a standard. Units For reference only Stereo Earphone-Microphone Combination Featuring a Rectangular Connector Conforms to JEITA RC-50 standard for a rectangular connector. Stereo earphones with a remote control, compatible for both music reproduction and hands-free operation. Separable earphone section and remote control plug. 7

37 AC Charger Compatible with PLC Equivalent to a 50m power line, it maintains a communication speed equal to that of when the charger is not connected. Its proprietary circuit structure allows for a low standby power of under 0mW. Designed with portability in mind, its power plug can be tucked away when not in use. <For Reference Only> Specification Input Voltage : 00V to 0V AC Stand by Power Consumption : 0mW max. (Vin=00V) Output Power : W max. Leakage Current : 5µA max. (Vin=0V) Antennas Various types of antenna are available from antennas for mobile phone to antennas for various radio terminals of data communication card antennas. The shapes of antenna for various needs are also available. External Type (Whip Antenna etc.) Section Antenna Resonance Frequency : 70MHz Extended : mm / Collapsed :.5mm / Diamater :.7mm Custom made available for various antennas Internal Type TransferJet TM Antenna Couple Resonance Frequency :.8GHz Size : 0mmX0mm Height :.mm /.mm (TransferJet TM and TransferJet TM logos are trademarks of Sony Corporation.) Custom Antenna Custom made available for various antennas 8

38 Bluetooth Unit Usable for Stereo Application Compatibility with stereo applications makes this product excellent to play music. Specification Version :.0 Power Class : Class Profile : ADP / AVRCP / HFP / HSP <Custom Mode> Module Bluetooth Audio Module BT505A Surface mounting type with antenna. Supports ADP and AVRCP which realizes audio transmission. Supports HSP and HFP which realizes hands free communication. Able to receive sounds from segment broadcasting since they are compatible with SCMS-T. Aquired Bluetooth SIG certification. Bluetooth Specification Power Class Support Profile CODEC Audio Frequency Range Power Supply Operating Temperature Range Dimension Custom Made Products We will meet the request of various custom products. Version.0 + EDR Class ADP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) HSP (Headset Profile) HFP (Hands-Free Profile) SBC (Sub Band CODEC) 00Hz to 5kHz.8 to.v DC 0 C to +80 C mm(w)x.8mm(d)x.5mm(h) Battery Connector Memory Card Connector Interface Connector Waterproof Pad (Please feel free to contact us for other waterproof products.) AC Charger Accessories 9