Dimensions. Electrical connection. Technical data. General specifications Operating frequency. Functional safety related parameters MTTF d
|
|
- Baldric Daniel
- 6 years ago
- Views:
Transcription
1 Dimensions ø 6. (4x) Electrical connection Model Number Read/Write head for IDENTControl, Europe, Middle East and Africa Features Flexible UHF read/write head with long range for use worldwide Ready-made PLC function blocks designed for quick and easy system integration Compact and robust housing for harsh industrial environments Switchable antenna polarization guarantees reliable tag detection and enhances process flow Multi-tag reading of up to 200 tags increases productivity For connection to IDENTControl control interface 2 Technical data General specifications Operating frequency Emitted power Operating distance Functional safety related parameters MTTF d Indicators/operating means LED green LED yellow LED blue 86 MHz 868 MHz: EU, Turkey 86 MHz 867 MHz: India 866 MHz MHz: Russia Transmission licenses for other countries on request mw ERP (ETSI 02208) adjustable typ. 4 m 28 a Power on Read/write operation successful Transmission mode Electrical specifications Power consumption P 0 0 W Supply from the IDENTControl Ambient conditions Ambient temperature C ( F) Storage temperature C ( F) Mechanical specifications Degree of protection IP67 Connection M2 x connector Material Housing PA 6 Base diecast aluminum Mass approx. 000 g Compliance with standards and directives Directive conformity R&TTE Directive 99//EC EN V.9.2:20 EN V.6.:20 EN V.4.:202 EN 6090-:2006/A:200 EN 064:200 Standard conformity Degree of protection EN 6029:2000 Approvals and certificates Radio approval A - B do not connect Shield EU: DOC-28 India: ETA-0/206-RLO(SR)/244
2 Function The read/write head operates in the UHF frequency range and is optimized for use in industrial applications involving greater distances. The device reads and writes passive tags in line with EPC Generation 2 (ISO/IEC ). The dense reader mode that has been implemented, which operates in accordance with ETSI EN , prevents read/write heads installed in close proximity from interfering with one another. Wide range of options supported for filtering data. The read/write head is connected to the IDENTControl interface using an M2 connector. The user can monitor the status of the read/write head using the integrated LEDs. The read/write head has a typical detection range of around 4 meter; this range is determined by the tag used and can be adjusted by selecting the transmission power. Other influencing factors include the setup and installation for the specific application in question, interference from materials present in the area (in particular metal), and the ambient conditions. The read and write distances for the relevant tag, which are detailed separately, have been established in a test laboratory under ideal conditions. For this reason, the combination of read/write head and tag must be tested for the intended application under real conditions. 2
3 IC-KP-B7-AIDA IDENTControl control interface IC-KP2-HB7-2VD control interface IC-KP2-2HB7-2VD control interface
4 IC-KP2-HB6-VB IC-KP2-2HB6-VB IC-KP2-HB6-2VB IC-KP2-HRX-2V with serial interface RS-22 and RS-48 IC-KP2-2HRX-2V with serial interface RS-22 and RS-48 IC-KP2-2HB2-2VD with EtherCAT interface V-G-M-PUR-ABG-V-W Connecting cable, M2 to M2, PUR cable 4-pin, shielded V-G-0M-PUR-ABG-V-W Connecting cable, M2 to M2, PUR cable 4-pin, shielded IUC72-F2-M-FR IUC76-0-FR IUC76-F7-M-FR IUC76-F20-M-FR 0pcs IUC76-C8-T4-GBL IUC77-F-M-GBL IUC77-2L00-GBL 000pcs IUC77-2L0-GBL 000pcs IUC78-7L7-GBL-Y2707 Kpcs IUZ-MH Mounting bracket for wall mounting IUZ-MH Mounting aid for round steel ø 2 mm or sheet. mm... mm IUC76-F7-T7-M-FR for standard applications IUC76-F7-T7-M-FR2 4
5 for standard applications IUC76-F7-T8-M-FR for paint shop applications IUC76-F7-T8-M-FR2 for paint shop applications IUC76-F7-T9-M-FR for autoclave applications IUC76-F7-T9-M-FR2 for autoclave applications
Dimensions. Electrical connection. Technical data. General specifications Operating frequency. Functional safety related parameters MTTF d
Dimensions 8 270 ø 6. (4x) 247 268 240 44 28 Electrical connection Model Number Read/Write head for IDENTControl, Europe, Middle East and Africa Features Flexible UHF read/write head with long range for
More informationDimensions. ø4 (3x) Electrical connection. Technical data. General specifications Operating frequency. Indicators/operating means
Dimensions 00 4 0 90 ø4 (x) 00 2 Electrical connection Model Number UHF read/write head, for IDENTControl, Europe, the Middle East, and Africa Features Most flexible midrange UHF read/write head for worldwide
More informationDimensions. Electrical connection. Technical data. General specifications Operating frequency. Indicators/operating means. Electrical specifications
Dimensions 8 270 ø 6. (4x) 247 268 240 44 28 Electrical connection Model Number Read/Write head for IDENTControl, Canada, United States and Mexico Features Flexible UHF read/write head with long range
More informationDimensions. ø4 (3x) Electrical connection. Technical data. General specifications Operating frequency. UL File Number
Dimensions 00 4 6 90 ø4 (x) 00 2 Electrical connection Model Number UHF read/write head, for IDENTControl, Canada, USA, and Mexico Features Most flexible midrange UHF read/write head for worldwide use
More informationFACTORY AUTOMATION. QUICK START GUIDE IUH-F190-V1-* Read / Write Head for IDENTControl
FACTORY AUTOMATION QUICK START GUIDE Read / Write Head for IDENTControl With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for
More informationQUICK START GUIDE IC-KP2-*
FACTORY AUTOMATION QUICK START GUIDE IC-KP2-* IDENTControl Compact control interfaces With regard to the supply of products, the current issue of the following document is applicable: The General Terms
More informationFACTORY AUTOMATION QUICK START GUIDE IC-KP-*
FACTORY AUTOMATION QUICK START GUIDE IC-KP-* IDENTControl units With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for Products
More informationDimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Pinout OBE12M-R100-S2EP-IO-V31
OBEM-R00-SEP-IO-V Dimensions. 8.7. 7..9. M (x).. ø... 0 9.9 7. 7. Release date: 08-06-08 :0 Date of issue: 08-06-08 80998_eng.xml Model Number OBEM-R00-SEP-IO-V Thru-beam sensor with -pin, M8 x connector
More informationYour Global Automation Partner. PD20-UHF RFID Handheld. Instructions for Use
Your Global Automation Partner PD20-UHF RFID Handheld Instructions for Use 2 Hans Turck GmbH & Co. KG T +49 208 4952-0 F +49 208 4952-264 more@turck.com www.turck.com Contents 1 About these Instructions
More informationMiniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 0--9 07:6 Date of issue: 0-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationPower supply Ex ec Ethernet Ex ec Com 3 Ex ec; USB Ex ec USB Ex ic (mouse/keyboard) USB Ex ic; TTY (Powerscan PSCAN) optional
Remote Monitor Features Remote Monitor Device installation in Zone 2 or Zone 22 9 inch monitor (48.3 cm) Network based data transfer via Ethernet (optional RDP, or VNC) Adapted for distances up to 90 m
More informationMHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER
MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Blind shaft version. 15mm standard ID with options down to 6mm ID Precision ball bearings with sealing flange High temperature
More informationFACTORY AUTOMATION INSTRUCTION MANUAL INDUCTIVE POSITIONING SYSTEM -F90
FACTORY AUTOMATION INSTRUCTION MANUAL INDUCTIVE POSITIONING SYSTEM -F90 . 1 System overview............................................. 5 2 Sensor versions..............................................
More informationRFID systems for the HF frequency range
Siemens AG 01 RFID systems for the HF frequency range / RFID systems introduction /7 RFID systems for the HF frequency range /7 SIMATIC RF00 /9 SIMATIC RF00 transponders /61 MDS D165 /61 MDS D61 /63 MDS
More informationControl Interfaces IDENTControl Control Interfaces IDENTControl Compact Read/Write Heads , 926, 927
Identification Systems Table of Contents Contents Data RFID Identification Systems Control Interfaces IDENTControl... 922 Control Interfaces IDENTControl Compact... 923 Read/Write Heads... 924, 926, 927
More informationTechnical Data. General specifications. Rated operating distance s n 3 mm
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection ATEX & IECEX certifications Usable up to SIL 2 acc. to IEC 61508 Weatherproof
More informationTechnical data. General specifications. Indicators/operating means
Release date: 08-0-08 0:7 Date of issue: 08-0-09 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationMultiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
More informationTechnical data. General specifications. Transducer frequency Indicators/operating means
Model Number Features Ultrasonic system for reliable detection of no, one, or two overlapping sheet materials, preferably papers Short version No TEACH-IN required Function indicators visible from all
More informationGeneral Specifications
General Specifications Field Wireless Communication Module GENERAL This General Specification (GS) describes the specifications for Field Wireless Communication Module. This product is based on the industrial
More informationMiniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
More informationSecurity Expert Smartcard Reader Mini
[ MINI ] Security Expert 1 Security Expert Smartcard Reader Mini The Security Expert Smartcard Reader provides a complete multi-technology smart card RFID solution. Compatible with all Wiegand data capable
More informationInclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationInclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationFACTORY AUTOMATION CATALOGUE IDENTIFICATION SYSTEMS
FACTORY AUTOMATION CATALOGUE IDENTIFICATION SYSTEMS Identification systems Edition: 009-0-0 Catalogue Identification Systems 009 Introduction...8. What is an identification system...8. Why an identification
More informationMiniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm
Electronic pressure measurement Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further approvals see page 5 MicroTronic
More informationSensor boxes SRBC. Festo core product range Covers 80% of your automation tasks
Sensor boxes SRBC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationDimensions. Model Number. Electrical connection. Features. Pinout. Indicators/operating means. Product information OQT150-R100-2EP-IO-V31
Dimensions.5 8.7 5.5.5. M (x)..5 7. 5.. 0 5.9 7. 9.95 Reveiver Emitter ø. Model Number Triangulation sensor (SbR) with -pin, M8 x connector Features Miniature design with versatile mounting options Multi
More informationID ISC.MR101-A ID ISC.PR101-A
OBID i-scan INSTALLATION ID ISC.MR101-A ID ISC.PR101-A final public (B) 2007-09-25 M50803-4e-ID-B.doc Copyright 2007 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0
More informationSITRANS T measuring instruments for temperature
Overview for flexible and cost-effective temperature measurements Supports the standard (HART V 7.1) Very high security level for wireless data transmission Built-in local user interface (LUI) with -button
More informationInstallation Sensing distance Connection Output configuration Operation mode NO Operation mode NC
Standard (thin shape) Inductive Proximity Sensor Thin shape for space saving surface mounting Direct side wall mounting for bracket-less installation Ordering Information DC 3-wire Models Installation
More informationNOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
More informationMagnetic field sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M12 x 1 Chrome-plated brass Rated operating distance 90 mm with DMR31-15-5 magnet DC 2-wire, nom.
More informationInstallation instructions RF-identification system with integrated AS-i slave DTSLF / / 2010
Installation instructions RF-identification system with integrated AS-i slave UK DTSLF 704153 / 07 04 / 2010 Inhalt 1 Preliminary note...4 1.1 Symbols used...4 2 Safety instructions...4 2.1 General...4
More informationDimensions. Electrical connection
GLV0-LL-7/0a//9 Dimensions GLV0-8-00 GLV0-8-H GLV0-LL... Display LED 7. 0 89. M x Bright/dark switch 8 M0 x. M x. ø M0 x. OLUX 6 6 Name plate GLV0-7 Display LED TW Sensitivity adjuster (not for switches
More informationXEELAS NODE MANUAL X-COM VERSION 1.0
This document is the official manual for the Xeelas LoRa Node. In this document, all the functions and technical specifications are described. X-COM VERSION 1.0 XEELAS NODE MANUAL Manual for Software version
More informationOnline data sheet TBS-1BSGT3506FM TBS TEMPERATURE SENSORS
Online data sheet TBS-1BSGT3506FM TBS A B C D E F Illustration may differ Detailed technical data Features Ordering information Type Part no. TBS-1BSGT3506FM 6053202 Other models and accessories www.sick.com/tbs
More informationInductive sensor with analog output BI15-M30-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M30 x 1.5 Chrome-plated brass Analog+ Extended operating range 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More information! Protected against mutual interference. ! DIN rail mounting
Fibre optic sensor for glass fibre optics SU15-G/32/82f/95 with -pin, M8 connector! Parameterisation via optical communication link (e.g. optional time increments)! Pre-fault indication and output (dynamic
More informationSensing light curtain as per DIN 18650/EN 16005
TÜV NORD CERT B GmbH Sensing light curtain as per DIN 8650/EN 6005 -DS-2P-200 Dimensions 38 L 42 aumuster geprüftf Zertifiziert nach DIN 8650 In accordance with Model Number -DS-2P-200 infrared scanner
More informationTechnical Data. General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm. Short-circuit protection
NCN-FK-N-V-V 002 Model Number NCN-FK-N-V-V Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection Fixed setting EC-Type Examination Certificate TÜV99
More informationPressure sensors SDE3, with display
Pressure sensors SDE3 Key features At a glance SDE3- -M plug version, plug M8x1 and M12x1 SDE3- -FQ, cable with plug Fast H-rail, wall or surface mounting Fast front panel mounting High-contrast, two-colour
More informationTechnical Data. Dimensions
Model Number Features 50 mm flush -wire DC S Technical Data specifications Switching function Normally open (NO) Output type PNP Rated operating distance s n 50 mm Installation flush Output polarity DC
More informationProduct Brief: SDC-PE15N n PCIe Module with Antenna Connectors
Product Brief: SDC-PE15N 802.11n PCIe Module with Antenna Connectors The SDC-PE15N PCI Express Mini Card (PCIe) radio module from Summit Data Communications combines a high-performance, dual-band 802.11n
More informationStandard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
More informationRFH620 RFID Proximity Interrogator
P r o d u c t i n f o r m at i o n RFH620 RFID Proximity Interrogator Powerful and adaptable for intelligent logistics and factory automation solutions PDF processed with CutePDF evaluation edition www.cutepdf.com
More informationTechnical data. General specifications. factory setting: 125 ms Memory Non-volatile memory Write cycles Indicators/operating means
Model Number Single head system Features IO-link interface for service and process data Programmable via DTM with PACTWARE Switch output and analog output Selectable sound lobe width Synchronization options
More informationSensing light curtain as per DIN 18650/EN 16005
TÜV NORD CERT B GmbH Dimensions 38 L 42 aumuster geprüftf Zertifiziert nach DIN 8650 In accordance with Model Number infrared scanner Profile length of 600 mm Electrical connection Features BN 24V Moving
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationGeneral Specifications
General Specifications LN90 Interface Adapter GENERAL This General Specification (GS) describes the specification for Interface Adapter. This product is a RS-485 signal relay and power supply for the Field
More informationALR-S350 Sled Handheld Universal Mobile RFID without the Hassle
ALR-S350 Sled Handheld The ALR-S350 is a robust, simple to use UHF passive RFID sled designed for all day intensive use. The sled characteristics provides the flexibility to use your preferred operating
More informationLevel sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
More informationfocus HAND channel wireless DMX riggers remote Users Manual Software version: 1.0
focus HAND 3 512 channel wireless DMX riggers remote Users Manual Software version: 1.0 FocusHAND 3 System description focushand 3 is a wireless remote control unit with a DMX output, to be used for controlling
More informationT-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
More informationMagnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-Y1X
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationThe LSI Gateway. GS220, GS221, GS222 series - LSI gateways. Features:
Features: Receive all LSI standard radio communications Configurable to be the master of up to 30 sensors, or to listen to unlimited number of devices. Input power supply: 9 to 30V, or USB port, or other
More informationSensor boxes SRBG Key features
Key features Function SRBG sensor boxes are the compact solution when it comes to electrical feedback signals and monitoring the position of process valves which are actuated with pneumatic quarter turn
More informationProximity sensors SME-8, for T-slot Technical data Magnetic reed
Function e.g. N/O contact, with cable, 3-wire Magnetic reed measuring principle Insertable in the slot lengthwise e.g. N/O contact, with plug, 3-pin SME-8-SL Sturdy thanks to long guides Plug directly
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationTechnical data. General specifications. Functional safety related parameters B 10d Electrical specifications Operating voltage U B
Model Number Cable pull rotary encoder with PROFI- NET interface Features Robust aluminum drum housing Drum travel when cable retracted using threaded spindle Bellows with steel tip Comprehensive accessories
More informationEncoder WDG 30A.
Encoder WDG 30A www.wachendorffautomation.com/wdg30a Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationDescription. SIMATIC Sensors. RF systems Wide-range power supply unit for SIMATIC RF systems. Operating Instructions 11/2007 J31069-D0169-U001-A4-7618
1 SIMATIC Sensors RF systems Wide-range power supply unit for SIMATIC RF systems Operating Instructions 11/2007 J31069-D0169-U001-A4-7618 Safety Guidelines This manual contains notices you have to observe
More informationREAD/WRITE MODULES (RWM) RLS
HF RFID SYSTEM READ/WRITE MODULES (RWM) RLS-- HOUSING M READ/WRITE DISTANCE. mm* ü M Metal threaded housing ü Sensing face of PBTP ü Insensible to dirt ü IO-Link V. ü x PNP output in SIO mode configurable
More informationUPort TM 200/400 Series Quick Installation Guide
UPort TM 200/400 Series Quick Installation Guide Edition 4.0, November 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax:
More informationInductive sensor Dual sensors with extended temperature range NI4-DSU35TC-2Y1X2/S97
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex-zone 20 for temperatures up to -25 C SIL2 acc. to IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position
More informationTechnical Information RIA15
T004K/09/EN/04.4 759844 Products Solutions Services Technical nformation RA5 Loop-powered 4 to 0 ma with optional HART communication Compact with very low voltage drop for universal use to display 4 to
More informationDigital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
More informationFork light barriers SOOF
Product range overview Method of measurement Size Min. object diameter Max. switching frequency Switching output Type of light Page/ Internet [mm] [mm] [Hz] Metal light barrier SOOF-M- -C30 30x35 0.5 4,000
More informationOPERATING INSTRUCTIONS 7 SERIES STATIC GENERATORS
OPERATING INSTRUCTIONS 7 SERIES STATIC GENERATORS GB Contents Page 1 Introduction 4 2 Safety 5 3 Use 6 4 Checking on Delivered Equipment 6 5 General Specification and Dimensions 7 6 Positioning 10 7 Operating
More informationProduct Brief: SDC-MCF10G g Miniature CF Module with Antenna Connectors
Product Brief: SDC-MCF10G 802.11g Miniature CF Module with Antenna Connectors The SDC-MCF10G miniature compact flash radio module from Summit Data Communications is a high-performance 802.11g radio in
More informationZBRN1 access point- 2 RJ V AC/DC-4 displays-5 LEDs-Eth-Modbus-wireless radio
Characteristics access point- 2 RJ45-24..240V AC/DC-4 displays-5 LEDs-Eth-Modbus-wireless radio Product availability : Stock - Normally stocked in distribution facility Price* : 400.00 USD Main Range of
More informationMultiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
More informationProduct Brief: SDC-PC22AG a/g PCMCIA Card with Integrated Antenna
Product Brief: SDC-PC22AG 802.11a/g PCMCIA Card with Integrated Antenna The SDC-PC22AG PC Card (PCMCIA) radio card from Summit Data Communications combines a high-performance 802.11a/g radio with customized
More informationHardware Capabilities. Product Brief: SDC-PC20G g PCMCIA Card with Integrated Antenna
Product Brief: SDC-PC20G 802.11g PCMCIA Card with Integrated Antenna The SDC-PC20G PCMCIA card from Summit Data Communications combines Summit s 802.11g radio and customized software both proven on mobile
More informationCalibratorUnit Models CPU6000-W, CPU6000-S, CPU6000-M
Calibration technology CalibratorUnit Models CPU6000-W, CPU6000-S, CPU6000-M WIKA data sheet CT 35.02 Applications Determination of the required masses or the reference pressure for calibration with pressure
More informationOnline data sheet VTE18-4P4240 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTE8-P0 V8 VTE8-P0 V8 A B C D E F Illustration may differ Ordering information Type Part no. VTE8-P0 606 Other models and accessories www.sick.com/v8 H I J K L M N O P Q R S T Detailed
More informationElectronic pressure switch with display Model PSD-4
Electronic pressure measurement Electronic pressure switch with display Model PSD-4 WIKA data sheet PE 81.86 Applications Machine tools Hydraulics and pneumatics Pumps and compressors Special-purpose machine
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationProduct Brief: SDC-PC10AG a/g Compact Flash Module with Antenna Connectors
Product Brief: SDC-PC10AG 802.11a/g Compact Flash Module with Antenna Connectors The SDC PC10AG PC Card (PCMCIA) radio module from Summit Data Communications combines a high performance 802.11a/g radio
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationInstallation Guide DEVIlink CC Central Controller
DEVIlink CC Central Controller www.devi.com Table of Contents 1 Introduction.................................... 4 2 Guidelines for installation....................... 5 3 Installation plan.................................
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationAccessories Fieldbus Box
Power cables, sensor cables, connection cables and further accessories see the EtherCAT Box chapter from page 514 Pre-assembled cables for fieldbus components include a wide range of cable assemblies.
More informationContents. Part no.: MLC500T Safety light curtain transmitter
Part no.: 68000307 MLC500T30-750 Safety light curtain transmitter Figure can vary Contents Technical data Suitable receivers Dimensioned drawings Electrical connection Circuit diagrams Operation and display
More informationAbsolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
More informationInductive sensor BI5-EM18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More information5 Fieldbus Technology
5 Fieldbus Technology Ex e / Ex i 10922E00 The s Ex e/ex i connect intrinsically safe Foundation Fieldbus H1 or Profibus PA field devices to a non-intrinsically safe / Ex e trunk. Up to four intrinsically
More informationModular pressure transmitters for harsh environments DST P500, DST P507 and DST P550
Data sheet Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550 The P500 / P507 / P550 utilizes the thin film strain gauge sensing technology, incorporating an hermetically
More informationRFID RFU63x / Long Range
ONLINE DATA SHEET www.mysick.com RFID RFU63x / Long Range RFU630-13107 RFID RFU63x Long Range Model Name > RFU630-13107 Part No. > 1061498 At a glance UHF RFID read/write unit for industrial applications
More informationSegment Protector for Cabinet Installation R2-SP-IC* Features. Assembly. Function. Connection. Trunk, Ex na non-arcing. Spur.
egment Protector for Cabinet nstallation Features Assembly 4... 12 outputs Ex ic (FCO or Entity) or non-incendive (Div 2) Advanced fault isolation at the spur egment Protector in Zone 2/Div. 2 nstruments
More informationTemperature dry-well calibrator Models CTD9100-COOL, CTD , CTD , CTD
Calibration technology Temperature dry-well calibrator Models CTD9100-COOL, CTD9100-165, CTD9100-450, CTD9100-650 WIKA data sheet CT 41.28 for further approvals see page 4 Applications Easy on-site calibration
More informationAbsolute encoders multiturn
PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these
More informationFork light barriers SOOF
Product range overview Method of measurement Size Min. object diameter Max. switching frequency Switching output Type of light Page/ Internet [mm] [mm] [Hz] Metal light barrier SOOF-M- -C30 30x35 0.5 4,000
More informationEthernet cabling. B Ethernet cabling. Ethernet cabling overview B 2. Cabling 4-poles IP 20 B.1 8 IP 65 / IP 67 B Cables B Tools B.
Ethernet cabling Contents Page B Ethernet cabling Ethernet cabling overview B 2 Cabling 4-poles B.1 8 B.1 22 Cables B.1 96 Tools B.1 104 Cabling 8-poles B.2 8 B.2 20 Cables B.2 90 Tools B.2 98 B 1 Profile
More information