3.7. Control Relays and Timers.
|
|
|
- Esther Foster
- 6 years ago
- Views:
Transcription
1 Control Relays and Timers.7 BF/BFD Series Fixed Contact Industrial Control Contents D15 Series Freedom 600V Multipole BF/BFD Series Fixed Contact Industrial Control Product Selection Options Technical Data and Specifications Dimensions R/RD Series Convertible Contact Industrial Control D26 Series Type M, 600 Vac Multipole with Convertible Contacts D26 Series Type M, DC Multipole with Convertible Contacts Page V7-T-146 V7-T-152 V7-T-154 V7-T-155 V7-T-156 V7-T-157 V7-T-162 V7-T-167 BF/BFD Series Fixed Contact Industrial Control Product Features and Benefits Type BF is C operated, 00V maximum, and the BFD is DC operated, 250V. Fixed contact relays are available in any combination of NO and NC from two to 12 poles. BF and BFD relays have captive clamp terminals fully accessible from the front, a molded coil with low operating temperature and silver alloy contacts suitable for low voltage circuits. Wiring to Relay In parallel with coil one timed and up to 12 instantaneous contacts, or In series with coil up to 12 timed contacts in one relay Permanent Magnet Latch Field mountable on BF; factory installed on BFD Latch coil continuously rated Latch plunger adjustable for optimum performance Standards and Certifications UL recognized, UL File No. E1922 (C relays only) CS certified, File No. LR9402-6, LR , 11 (C and DC relays) Volume 7 Logic Control, Operator Interface and Connectivity Solutions C E June V7-T-151
2 .7 Control Relays and Timers Product Selection When Ordering, Specify number of basic relay If a coil voltage other than listed is required, select the suffix code from the Coil Voltage table and substitute it for the last letter in the catalog number. Example: BF80V for a 110/60 C coil Type BF Type BFD Complete Relay Type BF and BFD, Two-, Three-, Four- and Six-Pole 1 Coil Voltage Type of Contact BF 00 Vac Basic Relays 120/60, 110/50 C Coil BFD 250 Vdc Basic Relays 120 DC Coil of Poles NO (Form ) NC (Form B) BF20F BFD20S 1 1 BF11F BFD11S 0 2 BF02F BFD02S 0 BF0F BFD0S 2 1 BF21F BFD21S BF12F BFD12S 0 BF0F BFD0S BF40F BFD40S 1 BF1F BFD1S 2 2 BF22F BFD22S 1 BF1F BFD1S 0 4 BF04F BFD04S BF60F BFD60S 5 1 BF51F BFD51S 4 2 BF42F BFD42S BFF BFDS 2 4 BF24F BFD24S 0 6 BF06F BFD06S BF Coils BFD Coils Volts C Hz Suffix Code Volts DC Suffix Code H 6 C I 12 D J 24 L V 8 N 110/120 50/60 F 48 M K 72 E 220/240 50/60 G 95 B C 120 S 10 U 240 T Notes 1 Relays listed above with equal number of NO and NC contact poles are specially priced 1NO and 1NC pole are supplied at no additional charge. 2 Consult Customer Support Center for availability. V7-T-152 Volume 7 Logic Control, Operator Interface and Connectivity Solutions C E June 201
3 Control Relays and Timers.7 When Ordering, Specify number of basic relay If a coil voltage other than listed is required, select the suffix code from the Coil Voltage table and substitute it for the last letter in the catalog number. Example: BF80V for a 110/60 C coil Type BF Type BFD Complete Relay Type BF and BFD, Eight-, 10- and 12-Pole 1 Coil Voltage Type of Contact BF 00 Vac Basic Relays 120/60, 110/50 C Coil BFD 250 Vdc Basic Relays 120 DC Coil of Poles NO (Form ) NC (Form B) BF80F BFD80S 7 1 BF71F BFD71S 6 2 BF62F BFD62S 5 BF5F BFD5S 4 4 BF44F BFD44S 0 8 BF08F BFD08S BF100F BFD100S 8 2 BF82F BFD82S 2 7 BF7F 2 BFD7S 6 4 BF64F BFD64S 5 5 BF55F BFD55S BF46F BFD46S 2 8 BF28F BFD28S BF120F BFD120S 8 4 BF84F BFD84S 7 5 BF75F BFD75S 6 6 BF66F BFD66S 5 7 BF57F BFD57S 4 8 BF48F BFD48S BF Coils BFD Coils Volts C Hz Suffix Code Volts DC Suffix Code H 6 C I 12 D J 24 L V 8 N 110/120 50/60 F 48 M K 72 E 220/240 50/60 G 95 B C 120 S 10 U 240 T Notes 1 Relays listed above with equal number of NO and NC contact poles are specially priced 1NO and 1NC pole are supplied at no additional charge. 2 Consult Customer Support Center for availability. Volume 7 Logic Control, Operator Interface and Connectivity Solutions C E June V7-T-15
4 .7 Control Relays and Timers Permanent Magnet Latch, Relay Mounted Options FSTON Push-On Terminals Overlapping Contacts Permanent Magnet Latch Coil Volts C Relays Coil Hz BFMLI BFMLJ 2 110/120 50/60 BFMLF 220/240 50/60 BFMLG DC Relays 24 BFMLL 48 BFMLM 120 BFMLS 240 BFMLT Insert letter F after relay type designation in listed catalog number. Example: BFF20F or BFDF20S NO contact closes before corresponding NC contact opens supplied as NO/NC set(s). Insert letter after relay type designation in listed catalog number. Example: BF22F or BFDF22S Code Letter F Code Letter NEM 1 Enclosure for Relay Types Code Letter BF, R all poles 4977D40G04 BFD 4 8 poles 4977D40G04 RD 4 8 poles 4977D40G04 Notes 1 For panel mount, add Suffix F. 2 Consult Customer Support Center for availability. V7-T-154 Volume 7 Logic Control, Operator Interface and Connectivity Solutions C E June 201
5 Control Relays and Timers.7 Technical Data and Specifications General Specifications BF Relay Electrical Ratings NEM 00 Maximum Current Maximum V Volts Cont. Make Break Make Break Horsepower Ratings (UL Recognized) DC Rating NEM P00 C Volts Maximum Current Max. Make Phase Volts Cont. Make Break or Break (V) 1 1/6 1/ Resistive Rating 125 Vdc 250 Vdc 1.5 Coil Power Requirements C 72 V open, 22 V closed DC 12 watts (nominal), 250V max. Permanent Magnet Latch Specifications Item Unlatching power requirements Specification Open gap: 24 V C Closed gap: 7 V Burden: 4 watts (C) Volume 7 Logic Control, Operator Interface and Connectivity Solutions C E June V7-T-155
6 .7 Control Relays and Timers Contact rrangements BF and BFD Relays 2 Poles Poles 4 Poles 6 Poles Center 10 Poles Note: NO = Normally Open NC = Normally Closed Dimensions pproximate Dimensions in Inches (mm) BF Relay with Permanent Magnet Latch and Solid- State Timer.1 (79.5) B C 1.97 (50) BF and BFD Relay Dimensions of Poles BF Only B BF w/latch Center 8 Poles 12 Poles BFD Relay with Solid-State Timer.1 (79.5) C BF w/timer D D BFD Only E 1.69 (42.9) E BFD w/timer 4.22 (81.8) 6.22 (158.0) 5.88 (149.4) 4.0 (102.4) 7.06 (179.) (106.4) 7.19 (182.6) 6.88 (174.8) 4.97 (126.2) 8.00 (20.2) (122.2) 7.81 (198.4) 7.50 (190.5) 5.6 (14.0) 8.66 (220.0) Enclosures NEM 1 for BF, BFD, R and RD 1.05 (26.7) 6.59 (167.4) 4.5 (114.) 2.8 (71.9) 1.72 (4.7) 5.66 (14.8) KO KO KO KO KO KO 1.72 (4.7) 0.25 (6.4) Dia. Mtg. Holes () 0.6 (16) 1.69 (42.9) 0.8 x 0.5 (9.7 x 12.7).8 (85.9) Conduit (2 Top, 2 Bottom) NEM 1 for BF, BFD, R and RD Dimensions Poles NEM 1 Relays without ttachments ll BF, R, RD 5.4 (15.6) 4 8 BFD 5.4 (15.6) 10, 12 BFD 7.97 (202.4) Relays with ttachments ll BF, R, RD 7.97 (202.4) 0.19 (4.8) KO KO V7-T-156 Volume 7 Logic Control, Operator Interface and Connectivity Solutions C E June 201
3.7. Control Relays and Timers. Contents. BF/BFD Series Fixed Contact Industrial Control. Machine Tool Relays. Product Description
Control Relays and Timers.7 BF/BFD Series Fixed Contact Industrial Control Contents D15 Series Freedom 600V Multipole.......... BF/BFD Series Fixed Contact Industrial Control Product Selection.......................
Contacts Contact Arrangement. 8-Pole Relay. 12-Pole Relay
Bulletin -P Heavy-Duty Industrial s Product Selection DC-Operated s Rail Mount DIN Rail Mount Cat. No. Cat. No. -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD DC Coil
Crane Control Contactors and Relays
October 8 DC Relays Type KC Heavy-Duty Mill 75 Contact Conversion The fully visible contacts have NEMA ICS--5 heavy-duty interrupting ratings and are easily converted in the field using just a screwdriver
KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC
P& KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435
KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC
KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435
ALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
Ice Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...
Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in
Bulletin 700-P, 700DC-P Industrial Relays
Bulletin 700-P, 700DC-P Industrial Relays Bulletin 700 P Direct Drive Convertible Contact Cartridge Relays NEMA and IEC ratings 600V maximum AC/DC Accessories for field installation: contact cartridges,
Description Page Number PM AC Relays PM DC Relays
Index Relays Description Page Number General Information... PM AC Relays PM Convertible, PMA, PMF, AC Relays... PM Latching, PML, PMAL, AC Relays... 5 Pole Arrangement, Diagrams, PM, PMA, PMF... 6 Dimensional
Crane Control Class 9004
Catalog 17 CONTENTS Description.....................................................Page Pricing and Ordering Information...................................... 140 Dimensions and Weights............................................
Mini Contactors & Overloads
108 Mini s & Overloads GMC-12M Surface or DIN rail mountable UL508 compliant 1/ to 7-1/ 50/60Hz AC and DC versions available Direct-mounting overloads RoHS compliant Auxiliary contacts standard (1 N.0.)
Bulletin 700-P, 700DC-P Industrial Relays
Bulletin 700-P, 700DC-P Industrial Relays Adder Decks Description No. of N.O. Contacts Continuous Carrying Current [A] Arrangement Second Deck (0-pole) 0 700-PB00 Second Deck 700-PB40 Second Deck (4-pole)
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
Miniature Circuit Breakers and Supplementary Protectors. Contents
. Optimum and Efficient Protection for Every Application Product Overview Features Optimum product quality, tested reliability and safety stand for best protection of personnel, installations and plant.
920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
Series CA7 Contactors
Series Rugged, space saving and modular Sprecher + Schuh s newest contactor for applications up to 6HP Over years of design experience has produced Sprecher + Schuh s seventh generation contactor line.
4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2
![4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2](/thumbs/76/73938132.jpg "4-Pole Relay. 2 Coil. [V] Hz A1 A2 60 Hz A24 A1 A20 A2")
ulletin - Product Overview/Product Selection ulletin - Industrial Relay ontact cartridges convertible from.o. to.. and vice versa EM V coils Pneumatic timing unit Solid-state timing unit Overlap contacts
CS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
Latching, Sequence and Impulse Relays Application Data
Latching, Sequence and Impulse Relays Application Data Energy Conservation Relays In many applications it is important for the customer to conserve electrical energy. One approach to energy conservation
D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
XPSMP11123P module XPS-MP - 2 independent functions - 24 V DC
Characteristics module XPS-MP - 2 independent functions - 24 V DC Main Range of product Product or component type Safety module name Safety module application 1-Nov-2018 Preventa Safety automation Safety
Ordering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
ASCO 920 Remote Control (RC) Switches
Maximum reliability and excellent value ASCO 920 Remote Control (RC) Switches ASCO 920 Remote Control Switch in Type Enclosure The ASCO 920 is designed as a feeder disconnect switch for load capacities
PRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
low voltage GLOBAL CATALOGUE RANGE Motor Control Contactors - Thermal Overload Relay s - Manual Motor Starters
CTLOGUE GLOBL RNGE 2. Motor Control Contactors - Thermal Overload Relay s - Manual Motor Starters 2. 2. Product Overview. 2.2 Overload Relay Setting Range 2. - 2.8 Product Specifications 2.9-2. Contactor
29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
CS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
Tachometer Panel, PE3
Features Plug-n-play units with factory programmed parameters 4-20 ma feedback signal Isolated relay alarm outputs Frequency input Diagnostic indicators NEMA 4 Enclosure Model PE3, Tachometer Panel Benefits
Ultra Slim Relays 24
Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
Transistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
CS8 Industrial Control Relays
CS8 Industrial Control Relays Despite increasing complexity, control systems and installations must become increasingly compact. And the CS8 Miniature Relay System packs maximum performance into minimum
C 2 5 D N A A A
Product Family Overview May 007 pplication Description These Cutler-Hammer ampere and horsepower rated devices from Eaton s electrical business are designed for service in applications such as Refrigeration,
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Hydraulic/Magnetic Circuit Breaker B-Series B-Series PDF elibrary The B-Series hydraulic/magnetic circuit breakers are compact and
Ordering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
Motor protection relays
Thermal overload relays for currents between 0.09 and 420A Electronic thermal overload relays for currents between 0.4 and A Electronic thermal overload relays with selectable tripping class: 5--20-30
Jockey Pump Controllers
BR081001EN Microprocessor Based with Color Touchscreen Product Description ACROSS THE LINE Controllers operate across-the-line. Full voltage is applied to the motor for starting by the use of a single
Magnetic Circuit Protectors 153. Multi-Pole Circuit Protectors 154. APL/UPL, 205/295 Barriers 155. Configurations 156. Operating Characteristics 158
Magnetic Circuit Protectors 53 Multi-Pole Circuit Protectors 54 APL/UPL, 205/295 Barriers 55 Configurations 56 Operating Characteristics 58 Delay Curves 59 Specifications 64 APL/UPL Decision Tables 70
Actuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
UL 489 DIN rail branch circuit breakers
UL 9 DI rail branch circuit breakers FAZ-A circuit breakers Product Overview UL 9 DI rail branch circuit breakers FAZ-A circuit breakers PRODUCT OVERVIEW Optimum and efficient protection Optimum product
MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD
United States MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD Product Information Features and Specifications For Use With: OEM Panels Approvals: UL
2 POLES 1 to 2 A (FOR SIGNAL SWITCHING)
FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part
Jockey Pump Controllers
BR081001EN Microprocessor Based with Color Touchscreen Product Description ACROSS THE LINE Controllers operate across-the-line. Full voltage is applied to the motor for starting by the use of a single
Magnetically Actuated Safety Interlock Switches
Conforms to EN10, EN292, EN020-1 CSA and BG approved Actual Size Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic,
Time Delay Values (E-Series)
Time Delay Values (ESeries) AC Instantaneous 00 0 INSTANTANEOUS CURVE NO. 20 00 0 DC D.C. INSTANTANEOUS CURVE NO. 0 0. 0..0.0.00 200 300 400 500 700 800 900 0 200.00 200 300 400 500 700 800 900 0 200 Short
CurrentWatch Current Sensors. EGF Series Ground Fault Sensors. Ground Fault Sensors with Solid-State or Mechanical Relay Outputs.
CurrentWatch Current Sensors Ground Fault Sensors with Solid-State or Mechanical Relay s 1 Contents Overview.................... 1 Model Selection, Switches...... 2 Model Selection, Accessories... 3 Wiring
V REG.-Nr. 3919, Z E214024
General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection
5. Terminal Shape P: PCB Terminals 6. Classification None : Standard ST : Stand-off 0.64 mm 15 : High-sensitivity (150 mw) Low-sensitivity
World's tandard Model! Resistant to electromagnetic interference, enables high-density mounting. Impulse withstand voltage of 1,5V meets FCC requirements. old-clad twin-contacts provide short contact bounce
Solid-state Timer H3FA. Model Number Structure. DIP Model Timer for PC Board Use Provides Contact and Solid-state Output
Solid-state Timer H3FA Please read and understand this catalog before purchasing the products. Please consult OMRON representative if you have any questions or comments. Refer to Warranty and Application
Heater Elements Starters with eutectic alloy overload relays require 3 heater elements. Located on page Max. Hp Rating Fuse Clip Type 3R/4/12
Bulletin NEM Combination Reversing Starters Product Selection Disconnect Type (Fusible with Class R Fuse Clips) (Non-Fusible) Bulletin NEM starter sizes Overload relays: Eutectic supplied as standard,
H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300
R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible
E-Series General Specifications
-Series General Specifications Ideally suited for higher amperage applications. Available with front and back mounting, screw terminals, stud terminals and heavy duty box wire connectors for solid wire
60103 Circuit Breaker
6003 Circuit Breaker United States MINIATURE CIRCUIT BREAKER, 20/240VAC, 2A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Circuit Breaker Type: Standard
Contactors and Contactor Assemblies
Contactor Industrial Controls Product Catalog 07 Section c o n t e n t s Section Overview / - /5 Product Overview /6 - /7 Contactors 3RT0, 3-pole to 95 /8 3RT0, 3-pole to 500 /9 3RT, 3-pole Vacuum to 500
Advantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
Square D General Purpose Relays
Square D General Purpose Relays Class 850R miniature control relays 850RS4 standard 850RS24 low level 850RS34 hermetically sealed Catalog 204 Contents Class 850R miniature control relays bbspecifications....................................................
Universal Tongue-Operated Safety Interlock Switch
Rev. 12.07 C R US Conforms to EN1088, EN292, EN60947-5-1, EN60204-1 UL and C-UL listed, B approved T12 Universal Tongue-Operated Safety Interlock Switch Strong and versatile the compact size of the strong,
Solid State Relays and Timers Family
Solid State Relays and Timers Family Vehicle Control Modules Waytek Stock No. Volt Rating Amp Rating Notes Dual Input Relay Activating either Input A or Input B sets output. 75532 12 15 Dual inputs Latching
0 1 CA7 all CA7-PA CA7 all CA7-PA CA7 all CA7-PA CA7 all CA7-PA CA7 all CA7-PA-20 27
ccessories Field Installable C7 Top (Front) Mount uxiliary Contact Blocks Contact Block NO NC 0 2 Contact rrangement 5161 5262 with... Standard Contacts Catalog Number Price Bifurcated Contacts Catalog
Z-15GW2277 Z-15GW2277-B
Basic Switch GENERAL PURPOSE General Purpose Basic Switch High precision basic switch in a variety of styles Wide margins of operating conditions increase the operating speed range Available in general
Product Substitution Details - Safety Modules
L () F Product Substitution Details - Safety Modules XPS modules - Replacement of the GSKC by the XPSK unit F2 L2 XPSK GSKC S () (-) S3 S32 2 3 23 T/33 T2 T2 T22 3 23 33 4 Y64 Y74 External jumper K- fuse
FAZ Supplementary Protectors, FAZ Miniature Circuit Breakers, P2 Disconnect Switches Overview
FAZ Supplementary Protectors, FAZ Miniature Circuit Breakers, P2 Disconnect Switches Overview Supplementary Protectors / Miniature Circuit Breakers Page System overview 10/003 10/001 Supplementary protectors
MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors
B Curve NC100H Supplementary Protectors Rating 1P 2P 3P 4P 80 MG27164 MG27175 MG27186 MG27197 MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors C Curve NC100H Supplementary Protectors
Bulletin 700-HA Tube Base Relay
Bulletin 700-HA Tube Base Relay Bulletin 700 HA Tube Base Relay 10 A contact rating DPDT, 3PDT Pin-style terminals Standard ON/OFF flag indicator Options: LED, push-to-test and manual override, socket-mounted
1.3. Miniature Circuit Breakers and Supplementary Protectors. Contents. WMZS Circuit Breaker. UL 1077 DIN Rail Supplementary Protectors
. Miniature Circuit Breakers and Supplementary Protectors UL 077 DIN Rail Supplementary Protectors WMZS Circuit Breakers Contents Description WMZS Circuit Breaker Standards and Certifications................
K1F037MCH cam voltmeter switch - 3L and 3L-N A - for Ø 22 mm
Characteristics cam voltmeter switch - 3L and 3L-N - 60-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
25 m 5 m 1 m. Part Number Mounting bracket. E39-LU1 Mounting bracket for E39-R1 reflector
Sensing distance Supply voltage 25 m 5 m 1 m General-Purpose Photoelectric Sensor Universal 24 to 240 VAC 24 to 240 VDC 3A, 250 VAC 400 ma 240 VAC 100 VDC Compact Limit Switch Style with Universal Supply
1 Installation of accessories in molded case switches requires dummy trip; see page. Breaker/Switch Type TQD/TJD
Molded Case Circuit Section Tri-Break Line Integrally Fused Thermal Magnetic Circuit Integrally Fused Magnetic Circuit Integrally Fused Molded Case Switches These breakers are available in three types.
Quantum III. Compact DC Drive Package. Slitter DC Drive Package. Quantum III
Compact DC Drive Package The delivers a DC drive package that integrates the intelligence of the Mentor II with a space saving design that incorporates many accessories typically required in the North
Bulletin 700-HL 2-Pole Terminal Block Relay
Bulletin 700-HL 2-Pole Terminal Block Relay Bulletin 700-HL 2-Pole "Terminal Block Relay" Relay and socket assembled interface modules for high density interposing or isolation applications Screw terminal
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers
Push Buttons and Operator Interface New Product Catalog XAL Control Stations
Push Buttons and Operator Interface New Product Catalog XAL Control Stations CONTENTS Description.................................................... Page General Information................................................104
9.3. Metering Devices, Protective Relays, Software and Connectivity
.3, Protective Relays, Software and Connectivity Product Eaton s IQ Multipoint Energy Submeter II is a revenue class electronic submetering device that can be mounted in panelboards or switchboards. When
C E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG GERMANY This is to certify that representative samples of Motor Controllers, Magnetic (See following pages for additional
24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD
United States 24973 Circuit Breaker MINIATURE CIRCUIT BREAKER, 440VAC, 10A, CIRCUIT BREAKER TYPE: STANDARD Image not available Product Information Features and Specifications Approvals: IEC 60947-2 Rated
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
Allen-Bradley Drives
Overview/Product Selection Bulletin IEC Industrial Safety Relay Positively Guided/Mechanically Linked as Per IEC 947-5-1 Annex L Third Party Certification By SUVA Red Cover and Mechanically Linked Contact
802B Compact, Precision and Small Precision
02B Compact, Precision and Small Precision Compact Precision Small Precision Description Bulletin 02B consists of different body styles: compact, precision and small precision. Each style has been designed
TABLE OF CONTENTS Bulletin 700-HA General Purpose Relays and Timing Relays. Description Page Description Page. Description
9 Bulletin 700-HA Bulletin 700-HA 10 A Rating DPDT 3PDT Pin Style Terminals Standard ON/OFF Flag Indicator Finger Grips for Easy Installation and Removal Optional Manual Operator Optional Pilot Light Optional
PGR-6101 MANUAL GROUND-FAULT & INSULATION MONITOR
Tel: +1-800-832-3873 E-mail: techline@littelfuse.com www.littelfuse.com PGR-6101 MANUAL GROUND-FAULT & INSULATION MONITOR Revision 0-C-041918 Copyright 2018 by Littelfuse, Inc. All rights reserved. Document
Time-limit operation/ self-resetting DPDT --- H3M H3M with Y92F-40 adapter SPDT SPDT H3M-H H3M-H with Y92F-40 adapter
Solid-state Timer Solid-state Timer with Variable Time Ranges Four time ranges are selectable per timer unit. Wide timing range of 0.05 second to 30 hours can be covered by a combination of five timer
APL/UPL, 205/295 Series Magnetic Circuit Protectors
APL/UPL, 205/295 APL/UPL, 205/295 Series Magnetic Circuit Protectors Introduction 68 Single & Multi-Pole 69 Barriers 7 Configurations 72 Operating Characteristics 74 Delay Curves 75 Specifications 80 Decision
PR - PCB relay. 42 catalog 2002 e / the PR-PCB relay. By using best materials and because of the simple construction the highest failsecurity
PR - PCB relay the PR-PCB relay PCB-Relay from the PR family are small relays. The version has forced guided contacts, 2 normally open contacts, 2 normally closed contacts. In the industrial electronic
K1C024B body for BCD encoded output switch - 1 pole A - for Ø 22 mm
Characteristics body for BCD encoded output switch - 1 pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Sub-assembly
MODEL NUMBERS OUTPUT SPECIFICATIONS 1 Zero Voltage and Random Turn-On Switching Panel Mount 600V Transient Capability Internal Snubber 110 & 125A Mode
MODEL NUMBERS OUTPUT SPECIFICATIONS 1 Zero Voltage and Random Turn-On Switching Panel Mount 600V Transient Capability Internal Snubber 110 & 125A Models Available Integrated Overvoltage Protection by Automatic
G3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE
Solid State Relay G3NE Compact, Low-cost, SSR Switching 5to20A D Wide load voltage range: 75 to 264 VAC. D Dedicated, compact aluminum PCB and power elements used. D Built-in varistor effectively absorbs
must Operate Voltage (V)
force-guided relays g7sa G7SA compact, Slim relays conforming to en Standards Relays with forcibly guided contacts (EN50205 Class A, certifi ed by VDE) Supports the CE marking of machinery (Machinery Directive)
Special-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
Switching Frequency Test Conditions (AC3/AC4/AC53-a)
Information Common to the G3J-T, G3J-S, and G3J CSM_G3J-T_G3J-S_G3J_common_DS_E_2_2 Engineering Data Load Current vs. Ambient Temperature Load current Io (A) G3J-T217BL G3J-T211BL G3J-S211BL G3J-211BL
Bulletin 871D Cylinder Position Inductive Style
Bulletin 871D Cylinder Position Inductive Style Description Bulletin 871D cylinder position inductive proximity sensors are self-contained solid state devices. These devices are designed for sensing metal
Applying branch circuit breakers and supplementary protectors in North America
Supersedes June 2017 FAZ-NA-L FAZ-NA FAZ Applying branch circuit breakers and supplementary protectors in North America Introduction Eaton offers three types of miniature circuit breakers for use in North
Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
Single Pole Circuit Breakers 83 Multi-Pole Circuit Breakers 84 APGHX/UPGHX Breakers 86 APGX/UPGX Breakers 87 APGN/UPGN Breakers 88 APG/UPG Handles
Single Pole Circuit Breakers 83 Multi-Pole Circuit Breakers 84 APGHX/UPGHX Breakers 86 APGX/UPGX Breakers 87 APGN/UPGN Breakers 88 APG/UPG Handles and Actuators 89 IPG Breakers 90 Configurations 9 Operating
NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER
time delay relays plug-in NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER Onboard & remote adjustable or fi xed time delays from 0.05 seconds to 2 hours Uses industry-standard 8 pin octal
Metering Devices, Protective Relays, Software and Connectivity. Pre-Wired Control Power, Voltage and CT Inputs
.3 Features and Benefits Saves installation time and cost One part number to order; no need to worry that any part has been left out Pick the meter or meters you need as it is designed to fit various Eaton
TIMERS FOR ALL APPLICATIONS
Fuji 1/1 DIN Super imers Overview IMERS FOR ALL APPLICAIONS AutomationDirect now offers solid-state timers brought to you by two leaders in the industry, FUJI and Koyo. FUJI Electric has been in business