1 Installation of accessories in molded case switches requires dummy trip; see page. Breaker/Switch Type TQD/TJD

Transcription

1 Molded Case Circuit Section Tri-Break Line Integrally Fused Thermal Magnetic Circuit Integrally Fused Magnetic Circuit Integrally Fused Molded Case Switches These breakers are available in three types. Type TB1 (15- amperes) product numbers include frame, trip, line and load lugs, and current limiters all factory assembled. TB6 (00 to amperes) and TB8 ( to 800 amperes) include frame, trip and limiters, factory assembled, but do not include line or load lugs. If line and load lugs are required, order separately. Unless otherwise noted, TB1, TB6, and TB8 breaker components are UL listed in File E 46. Fused molded case switches are UL listed in File E Mag-Break Line Magnetic only circuit breakers (motor circuit protectors) These breakers are available only with noninterchangeable adjustable magnetic trip, in frame Types E, F, J, K, and Tri-Break. All breakers are shipped factory assembled, complete with Cu/Al line and load lugs. All magnetic only circuit breakers and limiters are UL Component Recognized in Files E 1159 and E 6690, respectively, unless otherwise noted. Spectra RMS Circuit Determine the required breaker frame, IC rating, and load requirements. Select frame, trip unit (rating plug), and lug, if required, product numbers from the tables on pages -46 to -54. For Spectra breakers with MicroVersaTrip Plus or MicroVersaTrip PM Trip Units refer to pages -57 through -. Select field-mounted internal accessory product numbers, if required, on pages -70 and -71. Select fieldmounted external accessory product numbers, if required, on pages -97 through -107 and pages -66 to -69 for Spectra breakers with MicroVersaTrip Plus or MicroVersaTrip PM Trip Units. Order as separate items. Mag-Break Motor Circuit Protectors Determine the required frame and ampere requirements. Select frame, trip unit (rating plug), and lug, if required, product numbers from the table on pages -7 through -75. Select accessories as noted above for circuit breakers. The same accessories are used with both circuit breakers and motor circuit protectors. Order as separate items. Molded Case Switches Determine the required frame and ampere requirements. Select frame and lug, if required, product numbers from the table on page -7. Rating plugs are not used. Select accessories as noted above for circuit breakers. Internal accessories do not require dummy trips. The same accessories are used with both circuit breakers and molded case switches. Order as separate items. Unless otherwise noted, all circuit breakers are UL listed in File E Molded case switches are UL listed in File E Field-Installable Internal Accessories are UL listed in File E 575. Distribution Cable Accessories for MicroVersaTrip Plus Trip Units and MicroVersaTrip PM Trip Units are UL listed in File E 575. Accessories Order accessories from the appropriate table: Thermal Magnetic Circuit, Magnetic Circuit, and Molded Case Switches 1 pages -9 to -45 and -97 to Spectra RMS pages -70 to -71 and -97 to Spectra RMS with MicroVersaTrip Plus Trip Units or MicroVersaTrip PM Trip Unitspages -66 to -71, and -96 to Installation of accessories in molded case switches requires dummy trip; see page -45 for information. Dummy trip not required for Tri-Break or Q-Line molded case switches. Molded Case Circuit Breaker and Switch Terminal Configuration Code Order standard Cu/Al lugs by using suffix codes presented. Order lugs separately if special lugs are required. For optional lugs, see pages -101 and -10. Breaker/Switch Type TQD/TJD Molded Case, Thermal Magnetic Molded Case Switch Spectra RMS Mine Duty Mag-Break Blank WL XL X LL Suffix Line Lugs Line Lugs Order Lugs Separately Order Lugs Separately Publications and Reference: See Section for a -

2 Molded Case Circuit Section Quick Reference Guide 15-A Circuit Electric Trip Spectra RMS Ratings do not apply to molded case switches. The interruption ratings and voltages shown in the table are maximum ratings. A circuit breaker of the type given in the left-hand column may be applied at the given circuit voltage in any electrical distribution system where the available fault current at the load terminals of the breaker does not exceed the value in the table. That circuit breaker type may also be applied at intermediate values of circuit voltage provided the available fault current at the load terminals of the breaker does not exceed the value in the table for the higher value of voltage. SE 1 Spectra RMS Circuit UL/CSA Ratings Solid-State with Interchangeable Trip Unit (Rating Plug) Circuit UL Listed Interrupting RatingkA Dimensions Inches (mm) Approx. Ship Breaker Ampere No. Maximum Wt./Std. Type Rating Poles Vac 40 Vac 480 Vac Vac H W D A B C E Pack SE1 Current Limiting (UL File No. E-1159; CSA LR 40) SED 480 SEH SEP 00 5 SF- Current Limiting (UL File No. E-1159; CSA LR 40) SFH SFL SFP 00 5 SG Current Limiting (UL File No. E-1159; CSA LR 40) 1, SGH1, SGD SGH4 5 5 SGH6-5 5 SGL SGP (56) (0) (97) (11) (84) () (0) 5 5 SGL SGP4 00 SGL6 - SGP6 00 SK (UL File No. E-1159; CSA LR 40) 1, SKH8 SKL8 SKP8 SKH1 SKL1 SKP (94) 8.5 (10) 5. (0) 8.56 (17) 5.69 (5) 1.8 (5).6 () UL listed as HACR (heating, air conditioning and refrigeration). Not current-limiting circuit breaker. Includes MicroVersaTrip Plus Trip Units and MicroVersaTrip PM Trip Units. Publications and Reference: See Section for a 6.1 (0) 10.1 (57) 4.1 (105) 4.1 (105).8 (86).81 (97).41 (61).87 (98).47 (6).87 (98).69 ().69 ().7 () 1.19 (0) 4 MicroVersaTrip Plus Trip Units and MicroVersaTrip PM Trip Units only. 5 Add 1.76 inches (45 mm) to each end with lugs and lug cover installed. 6 Add 4.00 inches (101 mm) to upper end for SKP ( kaic-480v) lug cover. 5. lb/ lb/1 15. lb/ lb/1-7

3 Molded Case Circuit Section Quick Reference Guide 15-A Circuit Electric Trip Spectra RMS Ratings do not apply to molded case switches IEC/JIS Ratings Solid-State with Interchangeable Trip Unit (Rating Plug) Japanese Industry Standard IEC 947- Interruption Capacity ka Interruption Capacity ka Circuit 0-40 Vac Vac 0 Vac 690 Vac Vac Breaker Ampere No. Type Rating Poles I cu I cs I cu I cs I cu I cs I cu I cs SE1 Current Limiting, 15-A SED SEH SEP SE1 Current Limiting, 40-0A SED SEH SEP SF Current Limiting SFH SFL SFP SG Current Limiting SK SGH SGL SGP SGH SGL SGP SGH SGL SGP SKH8 SKL8 SKP8 SKH1 SKL1 SKP MicroVersaTrip Plus trip system only SE SF SG SK -8

4 Molded Case Circuit Section Page Updated 11 / A Circuit Electronic Trip Spectra RMS SE1 Line Circuit Product Number Structure S E D A 4 A T 000 Frame Rating Interruption Continuous Voltage Trip Trip Sensor Family (Amperes) Rating (480V) Load Rating Poles Rating Unit Function (Max Amps) S = Spectra E = 1 D = ka A = Standard = poles 4 = 480V A = RMS1 T = LSI H = 5 ka = poles 6 = V 0060 L = ka 0 P = ka 01 1 Adjustable Instantaneous with Tracking Short Time (Long Time established via Interchangeable Rating Plugs). Note: This information is provided for interpreting product numbers (it should not be used to build product numbers). SE1 Line, Suitable for Reverse Feed, UL File E-1159, CSA LR 40 SED, SEH; -Pole, UL/CSA: 1A, 480 Vac Max., IEC 947-: 0A, 415 Vac Max. Rating Plug Frame Terminal Lugs for Front Connection (Cu/Al) Adj. Inst. ka 5kA Ampere Trip Range Amps Product List Price Current Product List Price Product List Price Product List Price Wire Rating Low High Number GO-15S Sensor Number GO-15S Number GO-15S Number GO-15S Range 15 4 SRPE0A15 $ SRPE0A0 $ SRPE0A5 $ SEDA4AT000 $.00 SEHA4AT000 $ SRPE0A0 $ SRPE60A40 $ SRPE60A $ SEDA4AT0060 $.00 SEHA4AT0060 $ SRPE60A60 $ SRPEA70 $ SRPEA80 $ SRPEA90 $ SEDA4AT0 $1.00 SEHA4AT0 $ SRPEA $ SRPE1A110 $ SRPE1A15 $ SEDA4AT01 $87.00 SEHA4AT01 $ SRPE1A1 $ /0 Cu TCAL $.00 1-/0 Al SE1 Line, Suitable for Reverse Feed, UL File E-1159, CSA LR 40, SEP ; -Pole, UL/CSA: 1A, 480 Vac Max., IEC 947-: 0A, 415 Vac Max. Rating Plug Frame Terminal Lugs for Front Connection (Cu/Al) Adj. Inst. ka ka Ampere Trip Range Amps Product List Price Current Product List Price Product List Price Product List Price Wire Rating Low High Number GO-15S Sensor Number GO-15S Number GO-15S Number GO-15S Range 15 4 SRPE0A15 $ SRPE0A0 $ SRPE0A5 $ A4AT000 $ SEPA4AT000 $ SRPE0A0 $ SRPE60A40 $ SRPE60A $ A4AT0060 $ SEPA4AT0060 $ SRPE60A60 $ TCAL $.00 1-/0 Cu SRPEA70 $ /0 Al SRPEA80 $ SRPEA90 $ A4AT0 $ SEPA4AT0 $ SRPEA $ SRPE1A110 $ SRPE1A15 $ A4AT01 $08.00 SEPA4AT01 $ SRPE1A1 $106.00, SEP UL current limiting. Note: All Spectra breakers UL listed as HACR type. All Spectra breakers marked CE. -46

5 Molded Case Circuit Motor Circuit Protectors -1A Mag-Break Motor Circuit Protectors Current Limiting, UL Component Recognized 1 Section Features Suitable for Reverse Feed UL Recognized File E-1159 CSA Certified LR 40 IEC Vac Max. SE 1 0 Ampere Max. SF Ampere Max. SG 60 Ampere Max. SK 1 Ampere Max. UL Current Limiting High Interrupting Capacity Spectra RMS Motor Circuit ProtectorsSE1 Line -Pole Terminal Lugs for Rating Plug Frame Front Connection (Cu/Al) Adjustable Instantaneous Vac Vac Ampere Trip Ampere Range Product List Price Current Product List Price Product List Price Product List Price Wire Rating Low High Number GO-15S Sensor Number GO-1S Number GO-1S Number GO-15S Range 11 9 SRPE7A $ SRPE7A7 $ A6AI0007 $.00 SEPA6AI0007 $66.00 TCAL $ SRPE0A15 $ SRPE0A0 $ SRPE0A5 $ A6AI000 $.00 SEPA6AI000 $66.00 TCAL $ SRPE0A0 $ /0 Cu SRPE60A40 $ SRPE60A $ A6AI0060 $ SEPA6AI0060 $8.00 TCAL $ SRPE60A60 $ /0 Al SRPEA70 $ SRPEA80 $ SRPEA90 $ A6AI0 $ SEPA6AI0 $94.00 TCAL $ SRPEA $ SRPE1A110 $ SRPE1A15 $ A6AI01 $ SEPA6AI01 $ TCAL $ SRPE1A1 $ Standard Capacity Mag-Break Motor Circuit ProtectorsAdjustable Magnetic Trip, Noninterchangeable Types TEC, TECL Complete Breaker (includes line and load lugs) Vac Vac Adjustable Trip Two-Pole, 480 Vac Three-Pole, Vac Add-on Three-Pole Limiter, Vac Ampere Ampere Range Product List Price Product List Price Product List Price Rating Low High Number GO-1 Number GO-1 Number GO TEC400 $.00 TEC $88.00 TECL $ TEC4007 $.00 TEC7 $88.00 TECL7 $ TEC4015 $.00 TEC6015 $88.00 TECL6015 $ TEC400 $.00 TEC $88.00 TECL $ TEC40 $77.00 TEC60 $ TECL60 $ TEC4 $41.00 TEC6 $ TECL6 $ TEC41 $ TEC61 $ TECL61 $ Per UL 489, interruption ratings are not printed on the product label (interruption ratings are established based on a tested combination of the motor circuit protector and a properly sized overload relay and contactor). AC only Two-pole furnished in three-pole case. Publications and Reference: See Section for a -7