Dielectric withstanding voltage

Transcription

1 Connectors EXP series Connectors for Notebook PC- for PCI-Express Outline These products have been developed as slot connectors conforming to PCMCIA/JEITA s. Features Adopts kink reinforcement structure Has push-and-push structure Card-push and button-push types are selectable depending on usage. Distance ejected with card-push: 6 mm, distance ejected with button-push: 7 mm These connectors are low profile with an overall height of 5.6±0. mm from the PCB surface, making them ideal for thin low profile type products such as note PCs. Standoff type connectors are available so parts can be mounted under the connector. After mounting host connector, a guide unit is built into the host connector for safety. Electrical Characteristics Rated voltage Rated current Dielectric withstanding voltage Temperature range Durability 25V AC (r.m.s.) 0.75A DC per one contact 500V AC (r.m.s.) for one minute (leak current: ma) 0 C to +55 C 5000 cycles of insertion and extraction Document Disclaimer When placing orders with us, minimum order quantities are set for every product. Be sure to contact us before starting preliminary design of PCBs using our connectors. The specifications and information shown in the catalog are subject to change without notice.

2 Type and Combination Card Push Type Combination Assembly Host Connector EXP-26LMYG-S5ASAC EXP-26LMYG-SCNC EXP-26LMYG-S52ASAC EXP-26LMYG-S2CNC EXP-26LMYG-S53ASAC EXP-26LMYG-S3CNC Guide Unit EXP-26LMYG-S5EJAC EXP-26LMYG-S52EJAC EXP-26LMYG-S53EJAC Note Stand off 0.0mm Type Stand off 0.9mm Type Stand off.7mm Type Button Push Type Combination Assembly Host Connector EXP-26LMYG-S5ASDR EXP-26LMYG-SCNB EXP-26LMYG-S52ASER EXP-26LMYG-S2CNB Guide Unit EXP-26LMYG-S5EJDR EXP-26LMYG-S52EJER Note Stand off 0.0mm Type Stand off 0.9mm Type Reflow temperature profile (for reference purposes) 250 C 220 C 30~50 C (Preheating period) 60~20sec (Peak) (Full heating period) 30sec The reflow temperature profile shown in this drawing is for reference purposes. This profile depends on requirements such as reflow equipment, soldering paste, and PCB size. Thus, this profile may not meet with your specific situation. Please evaluate your PCB-mounting soldering and set your own reflow temperature profile. ΩApplicable products EXP series SMT type connector The profile shown in this drawing is applicable only for those products shown above.

3 Product List Slot assembly for ExpressCard (Card push type) EXP-26LMYG-S5ASAC Slot assembly for ExpressCard (Card push type) EXP-26LMYG-S5( )ASAC Slot assembly for ExpressCard (Button push type) EXP-26LMYG-S5ASDR Slot assembly for ExpressCard (Button push type) EXP-26LMYG-S52ASER I-2EXP EXP series...4 I-3EXP EXP series...5 I-4EXP EXP series...6 I-5EXP EXP series...7 Host connector for ExpressCard (Card push type) EXP-26LMYG-S( )CNC Guide unit for ExpressCard (Card push type) EXP-26LMYG-S5EJAC Guide unit for ExpressCard (Card push type) EXP-26LMYG-S5( )EJAC Host connector for ExpressCard (Button push type) EXP-26LMYG-S( )CNB I-6EXP EXP series...8 I-7EXP EXP series...9 I-8EXP EXP series...0 I-9EXP EXP series... Guide unit for ExpressCard (Button push type) EXP-26LMYG-S5EJDR Guide unit for ExpressCard (Button push type) EXP-26LMYG-S52EJER I-20EXP EXP series...2 I-2EXP EXP series...3

4 Slot assembly for ExpressCard (Card push type) EXP-26LMYG-S5ASAC Assembly Card push type EXP- 26 LMY G- S 5 AS A C ª º Series name No. of contacts: 26 ExpressCard size: 5 (54mm width) Stand off: (0.0mm) Product name: AS (Assembly) ª Host connector shape: (Sequential number) º Guide unit shape: A (Sequential number) Ejector mechanism: C (Card push type) 2-M2 0.4 (B) 23.5 REF A ±0. POS.# ➀ Host connector ➁ Guide unit REF. (26 -)=25 Edge of card REF. 0.5 REF. Dimension when fully pressing card 79.7 REF. Dimension when locking card 85.7 REF. Dimension when releasing card PAD (Both sides) 0.8 ±0. (All circumference) ±0.05 EXP-26LMYG-S5ASAC EXP-26LMYG-SCNC EXP-26LMYG-S5EJAC ±0.05 (26-)=25 ±0. ± ± ±0..5 ± ± REF. POS.# 56.2 ± REF. Part No. A B Note 2-ø PAD P.T.H. (R0.425) Edge of PCB Recommended PCB layout 9.45 ± ±0.05 Combination table Part No. Host connector Guide unit EXP-26LMYG-S5ASAC Stand off 0.0mm type Through SMT Press-in IDC Soldering Crimping wrapping

5 Slot assembly for ExpressCard (Card push type) EXP-26LMYG-S5( )ASAC EXP- 26 LMY G- S 5 ( ) AS A C ª º Series name No. of contacts: 26 ExpressCard size: 5 (54mm width) Stand off: 2 (0.9mm) 3 (.7mm) Assembly Card push type Product name: AS (Assembly) ª Host connector shape: (Sequential number) º Guide unit shape: A (Sequential number) Ejector mechanism: C (Card push type) EXP 2-M2 0.4 (B) 23.5 REF. A ± POS.# ➀ Host connector ➁ Guide unit REF. (26- )=25 Edge of card REF. 0.5 REF. (Dimension when fully pressing card) 79.7 REF. (Dimension when locking card) 85.7 REF. (Dimension when releasing card) PAD (Both sides) 0.8 ±0. (All circumference) ± ±0.05 (26-)=25 ±0. ± ± ±0. EXP-26LMYG-S52ASAC EXP-26LMYG-S2CNC EXP-26LMYG-S52EJAC EXP-26LMYG-S53ASAC EXP-26LMYG-S3CNC EXP-26LMYG-S53EJAC Part No. A B Note EXP-26LMYG-S52ASAC EXP-26LMYG-S53ASAC.5 ± ± REF. POS.# 56.2 ± REF ø P.T.H. PAD (R0.425) Recommended PCB layout Edge of PCB 9.45 ± ±0.05 Combination table Part No. Host connector Guide unit Stand off 0.9mm type Stand off.7mm type wrapping Crimping Soldering IDC Press-in SMT Through

6 Slot assembly for ExpressCard (Button push type) EXP-26LMYG-S5ASDR Assembly Button push type EXP- 26 LMY G- S 5 AS D R ª º Series name No. of contacts: 26 ExpressCard size: 5 (54mm width) Stand off: (0.0mm) Product name: AS (Assembly) ª Host connector shape: (Sequential number) º Guide unit shape: D (Sequential number) Ejector mechanism: R (Button push type Right side ejector) REF. 46 MAX REF. (Dimension when fully pressing button) REF. Edge of the card when the card is fully inserted (Dimension when locking button) REF (Dimension when releasing button) 4.65 C M2 0.4 B ±0. A ø POS.# ø ± ±0. 4 ±0..85 ±0. (26-)=25 ±0. ± ± ± ± REF. POS.# 5.4 ±0.05 ø ø ø ± ± ± ± ± ±0. Recommended PCB layout ± ±0.05 Edge of PCB Combination table Part No. Host connector Guide unit EXP-26LMYG-S5ASDR EXP-26LMYG-SCNB EXP-26LMYG-S5EJDR 46.5 ±0.05 ➀ Host connector ➁ Guide unit Part No. A B EXP-26LMYG-S5ASDR Stand off 0.0mm type C Note Through SMT Press-in IDC Soldering Crimping wrapping

7 Slot assembly for ExpressCard (Button push type) EXP-26LMYG-S52ASER EXP- 26 LMY G- S 5 2 AS E R ª º Series name No. of contacts: 26 ExpressCard size: 5 (54mm width) Stand off: 2 (0.9mm) Assembly Button push type Product name: AS (Assembly) ª Host connector shape: (Sequential number) º Guide unit shape: A (Sequential number) Ejector mechanism: R (Button push type Right side ejector) EXP 2-M2 0.4 B ±0. A ø REF. ➀ Host connector ➁ Guide unit 75.7 REF. (Dimension when fully pressing button) 77 REF. Edge of the card when the card is fully inserted 54.4 POS. # MAX ø ±0. (Dimension when locking button) 86 REF (Dimension when releasing button) 4.4 ±0. 4 ±0..85 ±0. 5 C (26-)=25 ±0. ± ± ±0.05 ø ø ± ± ±0. Edge of PCB 20.7 ± ±0. Recommended PCB layout ± ±0.05 Combination table Part No. Host connector Guide unit EXP-26LMYG-S52ASER EXP-26LMYG-S2CNB EXP-26LMYG-S52EJER 4.4 ± ± REF ±0.05 Part No. A B EXP-26LMYG-S52ASER Stand off 0.9mm type POS.# C 2-ø Note 46.5 ±0.05 wrapping Crimping Soldering IDC Press-in SMT Through

8 Host connector for ExpressCard (Card push type) EXP-26LMYG-S( )CNC host connector Card push type Right-angle SMT EXP- 26 LMY G- S ( ) CN C ª º Series name No. of contacts: 26 Stand off: (0.0mm) 2 (0.9mm) 3 (.7mm) Product name: CN (Host connector) Host connector shape: (Sequential number) ª Ejector mechanism: C (Card push type) 35. (26-)= B A 3.3 POS.# (26- )= PAD (Both sides) 0.8 ±0. (All circumference) P.T.H. POS.# 29.4 ± ±0.05 (26-)=25 ±0. ± ±0.05 PAD 2.75 ±0. (R0.425).5 ± ±0. Recommended PCB layout Contact Insulator Lock plate Part No. A B Note EXP-26LMYG-SCNC EXP-26LMYG-S2CNC EXP-26LMYG-S3CNC Stand off 0.0mm type Stand off 0.9mm type Stand off.7mm type Mating guide unit: EXP-26LMYG-S5EJEC, EXP-26LMYG-S5( )EJAC Through SMT Press-in IDC Soldering Crimping wrapping

9 Guide unit for ExpressCard (Card push type) EXP-26LMYG-S5EJAC EXP- 26 LMY G- S 5 EJ A C ª º Series name No. of contacts: 26 ExpressCard size: 5 (54mm width) Stand off: (0.0mm) Guide unit Card push type Product name: EJ (Guide unit) ª Guide unit shape: A (Sequential number) Ejector mechanism: C (Card push type) EXP REF Edge of card 23 REF REF. (Dimension when fully pressing card) 23.5 REF. (Dimension when locking card) 29.5 REF. (Dimension when releasing card) REF. (C) B ±0. A 3.4 Shell Eject plate Crankpin Coil spring Side rail Holding guide arm Hericaltorshon coil spring Lock pin Part No. A B C Note EXP-26LMYG-S5EJAC Stand off 0.0mm type Mating host connector: EXP-26LMYG-S( )CNC wrapping Crimping Soldering IDC Press-in SMT Through

10 Guide unit for ExpressCard (Card push type) EXP-26LMYG-S5( )EJAC Guide unit Card push type EXP- 26 LMY G- S 5 ( ) EJ A C ª º Series name No. of contacts: 26 ExpressCard size: 5 (54mm width) Stand off: 2 (0.9mm) 3 (.7mm) Product name: EJ (Guide unit) ª Guide unit shape: A (Sequential number) Ejector mechanism: C (Card push type) REF REF. (Dimension when fully pressing card) 23.5 REF. (Dimension when locking card) 29.5 REF. (Dimension when releasing card) ª REF. (C) B 6 REF. A Edge of card Shell Eject plate Crankpin Coil spring Side rail Holding guide arm Hericaltorshon coil spring Lock pin ª Plate Part No. A B EXP-26LMYG-S52EJAC EXP-26LMYG-S53EJAC C Note Stand off 0.9mm type Stand off.7mm type Mating host connector: EXP-26LMYG-S( )CNC Through SMT Press-in IDC Soldering Crimping wrapping

11 Host connector for ExpressCard (Button push type) EXP-26LMYG-S( )CNB EXP- 26 LMY G- S ( ) CN B ª Series name No. of contacts: 26 Stand off: (0.0mm) 2 (0.9mm) /Host connector Button push type Right-angle SMT Product name: CN (Host connector) Host connector shape: (Sequential number) ª Ejector mechanism: B (Button push type) EXP 35. (26-)= ø ø POS.#.25.4 POS.# (26-)= (B) A 6.93 ± ±0. 4 ±0..85 ±0. (26-)=25 ±0. ± ±0.05 ø ø ± ± ± ± ± ± ± ±0. Recommended PCB layout Contact Insulator Hold down Part No. EXP-26LMYG-SCNB EXP-26LMYG-S2CNB A B Note Stand off 0.0mm type Stand off 0.9mm type Mating guide unit: EXP-26LMYG-S5EJDR, EXP-26LMYG-S52EJER wrapping Crimping Soldering IDC Press-in SMT Through

12 Guide unit for ExpressCard (Button push type) EXP-26LMYG-S5EJDR Guide unit Button push type EXP- 26 LMY G- S 5 EJ D R ª º Series name No. of contacts: 26 ExpressCard size: 5 (54mm width) Stand off: (0.0mm) Product name: EJ (Guide unit) ª Guide unit shape: D (Sequential number) º Ejector mechanism: R (Button push type Right side ejector) MAX REF. (Dimension when fully pressing button) 29. REF. (Dimension when locking button) 38. REF. (Dimension when releasing button) Edge of the card when the card is fully inserted 4.65 C ª º M2 0.4 B ±0. A Shell Eject plate Eject base Ejector Eject arm Crankpin Coil spring Eject button ª Side rail º Holding guide arm Lock pin Hericaltorshon coil spring Part No. A B C Note EXP-26LMYG-S5EJDR Stand off 0.0mm type Mating host connector: EXP-26LMYG-S( )CNB Through SMT Press-in IDC Soldering Crimping wrapping

13 Guide unit for ExpressCard (Button push type) EXP-26LMYG-S52EJER EXP- 26 LMY G- S 5 2 EJ E R ª º Series name No. of contacts: 26 ExpressCard size: 5 (54mm width) Stand off: 2 (0.9mm) Guide unit Button push type Product name: EJ (Guide unit) ª Guide unit shape: E (Sequential number) º Ejector mechanism: R (Button push type Right side ejector) EXP MAX REF. (Dimension when fully pressing button) REF. (Dimension when locking button) REF. (Dimension when releasing button) ª M2 0.4 Edge of the card when the card is fully inserted 5 C B ±0. A 54.4 º Shell Eject plate Eject base Ejector Eject arm Crankpin Coil spring Eject button ª Side rail º Holding guide rail Lock pin Hericaltorshon coil spring Under shell Part No. A B C Note EXP-26LMYG-S52EJER Stand off 0.9mm type Mating host connector: EXP-26LMYG-S( )CNB wrapping Crimping Soldering IDC Press-in SMT Through

14 Push button type slot assembly for ExpressCards/34 EXP-26LMYG-S3AS2AR Assembly Push button type Conforms to EXP- 26 LMY G- S 3 AS 2 A R ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➀0 ➀ ➀ Series name ➆ Standoff: (0.0 mm) ➁ No. of contacts: 26 ➇ Product name AS (assembly) ➂ Forms of contact and insulator Form of host connector: 2 (serial number) LMY: Right-angle, SMT type, male ➀0 Form of guide unit: A (serial number) ➃ Contact plating ➀ Ejection mechanism: G: Gold plate R (right-sided ejection with a push button) ➄ Mount type: S (standard) ➅ ExpressCard size: 3 (34 mm width) ➅ ➅ 7 max max. 23 max (74.95) (Button dead-end position) (76.25) (Button storage position) (85.25) (Button release position) (6.2) 43.4 Edege of the card when the card is fully inserted Pos.# 4 ±0..85 ±0. (26 )=25 ±0. ± ±0.05 Pos.# Pos.# Pos.#26 ø.4 ø ± ±0. Ø.6 0. Ø.4 2-Ø ± ± ± ± ± ±0. (65.70) 46.5 ± ± ±0. (Edge of PCB) 43.4 ±0.05 ➀ Host connector ➁ Guide unit Table Part No. EXP-26LMYG-S3AS2AR Recommended PCB layout Host connector Guide unit EXP-26LMYG-SCN2B3 EXP-26LMYG-S3EJAR Dip SMT Press-in IDC Soldering Crimping wrapping EXP series

15 Push button type host connector for ExpressCards/34 EXP-26LMYG-SCN2B3, host connector Push button type Right-angle SMT Conforms to EXP- 26 LMY G- S CN 2 B 3 ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➀0 ➀ Series name ➁ No. of contacts: 26 ➂ Forms of contact insulator LMY: Right-angle, SMT type, male ➃ Contact plating ➆ Product name CN (host connector) ➇ Form of host connector: 2 (serial number) Ejection mechanism: B (right-sided ejection with a push button) ➀0 ExpressCard size: 3 (34 mm width) G: Gold plate ➄ Mount type: S (standard) ➅ Standoff: (0.0 mm) ➅ ➅ 35. (26 )= Ø.2 Ø Pos.# (26 )= Pos.# ± ±0. Pos.# 4 ±0..85 ±0. (26 )=25 ±0. ± ±0.05 Ø Ø ± ± ± ± ± ±0. Pos.# ± ±0. Recommended PCB layout ➀ Contact ➁ Insulator ➂ Hold down Mating guide unit: EXP-26LMYG-S3EJAR EXP series wrapping Crimping Soldering IDC Press-in SMT Dip

16 Push button type slot assembly for ExpressCards/34 EXP-26LMYG-S3EJAR Guide unit Push button type Conforms to EXP- 26 LMY G- S 3 EJ A R ➀ ➁ ➂ ➃ ➄ ➅ ➆ ➇ ➀0 ➀ Series name ➆ Standoff: (0.0 mm) ➁ No. of contacts: 26 ➇ Product name EJ (guide unit) ➂ Forms of contact and insulator Form of guide unit: A (serial number) LMY: Right-angle, SMT type, male ➀0 Ejection mechanism: ➃ Contact plating R (right-sided ejection with a push button) G: Gold plate ➄ Mount type: S (standard) ➅ ExpressCard size: 3 (34 mm width) ➅ ➅ 7 max Ref (6.2) ➀ Shell ➁ Eject plate ➂ Eject base ➃ Ejector ➄ Eject arm ➅ Crank pin ➆ Coil spring ➇ Eject button max. 23 max (28.8) (Button dead-end position) Edege of the card when the card is fully inserted (30.) (Button storage position) (39.) (Button release position) Mating host connector: EXP-26LMYG-SCN2B3 Dip SMT Press-in IDC Soldering Crimping wrapping EXP series