0.4 mm Pitch, Space-saving Interface Connectors

Transcription

1 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size. Plug (8 conductors) * Shown for reference only - not supplied * Overmold 60-8P Overview Developed as input/output connectors for use in portable devices requiring reliable high durability connection. Features. Small size With a width of and. height above the mounting surface the connectors may be used in applications where board and volume space is restricted.. Strong construction Single piece shell increases the board retention and resists rotational forces encountered in demanding consumer environment. High durability Unique lock latches will maintain high retention force (plug with corresponding receptacle) up to 0,000 cycles, confirming fully mated condition with a distinctive tactile click sensation.. ESD protection Increased distance from the edge of the metal shell to the front of the contacts offers circuit protection from electrostatic discharge.. RoHS compliant All components and materials comply with the requirements of EU Directive 00/9/EC Applications DSC, PDA, notebook computers, mobile phones and other portable devices requiring high durability interface connectors.. *Overmold Plug 0-8S * Shown for reference only - not supplied. ESD protection Despite its miniature size the long distance from the metal shell edge to the front of the contacts provides protection from electrostatic discharge. Locks 008.

2 All non-rohs products Series have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. Specifications Ratings Current rating Voltage rating 0. A ( A / contact, each contact at the end, contacts only) 0 V AC Operating temperature range -0ç to +80ç Note Storage temperature range -0ç to +8ç Note Item Specification Conditions. Contact resistance 60 mø max. 00 ma DC. Insulation resistance 00 Mø min. 00 V DC. Withstanding voltage No flashover or insulation breakdown 00 V AC / minute. Durability Contact resistance: 00 mø max. 0,000 cycles No damage cracks or parts dislocation.. Shock No electrical discontinuity of μs or longer. Acceleration of 90m/s, ms duration, sine half-wave, cycles, axis 6. Vibration No electrical discontinuity of μs or longer. Frequency: 0 to Hz, single amplitude of 0.7, directions for hours 7. Temperature cycle Temperature: - C +ç to ç +8ç +ç to ç Contact resistance: 00 mø max. Time: 0min. min. to min. 0min. min. to min. cycles 8. Humidity Insulation resistance: 00 mø min. 96 hours at a 0 ±ç, RH of 90 to 9%, Insulation resistance: 0 Mø min. then leave for to hours at normal temperature and humidity 9. Heat resistance Contact resistance: 00 mø max. 96 ± hours at +8 ±ç 0. Cold resistance Contact resistance: 00 mø max. 96 ± hours at -0 ±ç. Salt spray test Contact resistance: 00 mø max. 8 hours at a concentration of % ±%, and humidity of 8 ±ç Note. Includes temperature raise caused by current flow. Note. The term storage refers to products stored for long period, prior to mounting and use. Materials Part Material Finish Remarks Insulator Contacts Shell Synthetic resin Copper alloy Color: Black Gold plated Selective gold plated UL9V-0 Plug Part Material Finish Remarks Insulator Contacts Shells Lock Synthetic resin Copper alloy Color: Black Gold plated Nickel plated UL9V-0 Ordering information Plug 60-8 P 0-8 S Series name: 60 (s) 0 (Plugs) Number of contacts : 8 Contacts type P: Male S: Female

3 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website Series RoHS search at your Hirose sales representative. Part Number CL No. RoHS 60-8P YES Note : Tape and reel packaging (,00 pieces/reel). Order by number of reels. 0. (.) (0.6) No. No.8 (.). (0.78) (0.6) Ø0.8 9 BRecoended PCB mounting pattern.(land) No. (Land) Ø(Hole) (Land) 6(Land) No.8.(Land) 0.6(Through hole)..(through hole).9(land)..8 No conductive traces PCB edge

4 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Series Hirose website RoHS search at your Hirose sales represent Plug Part Number CL No. RoHS 0-8S YES Assembled components - Supplied non-terminated, without overmold No.8. No. (.6).6 6 Assembly (insulator/ contact/lock) (6.9) (7.7) A A-A P= A (0.) BRecoended PCB mounting pattern (Thickness=0.6) P=(Hole pitch) BPCB installed BContact Number Identification (MAX) (MAX) 8-Ø0.(MIN) PCB (Thickness=0.6) Shown for reference only - not supplied

5 All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Series Hirose website RoHS search at your Hirose sales represent Packaging Specifications Embossed carrier tape dimensions.7 Reel Dimensions 6 Unreeling direction 80 BRecoended reflow temperature profile - receptacles Using lead-free solder paste. Temperature(ç) ç 60s 0ç 0ç min. 0ç min. 0s Time(Seconds) HRS test condition KSolder composition :Paste,96.%Sn/.0%Ag/0.%Cu KTest board :Glass epoxy thick The temperature profiles are based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume / thickness and board size / thickness. Consult your solder paste and equipment manufacturer for specific recoendations.