Cert.Record No _C_000, Class No , DQD No 548 Rev

Transcription

1 Page 1 of 7 CERTIFICATION RECORD The company named below has been authorized by CSA International to represent the products listed in this record as CSA Certified and to affix the CSA Mark to these products according to the terms and conditions of the CSA Service Agreement and applicable CSA program requirements (including additional Markings). File No: Class No: _C_ INDUSTRIAL CONTROL EQUIPMENT Motor Controllers-Magnetic SUBMITTOR Eaton Industries GmbH Hein-Moeller-Strasse 7-11 Bonn, Germany FACTORIES Eaton Electro Productie S.r.l. SC Moeller Electroproductie s.r.l. 8 Independenti Sarbi, Romania Eaton Electrical Ltd. 2# Lou Yang Road Weiting SIP Suzhou, Jiangsu China July 31, 2014 (Replaces: June 26, 2014) Contactors; Type DILM185A, DILM225A, XTCE 185H, XTCE 225H; DIL M185A-SOND730, DIL M225A- SOND730, XTCE 185H-S730 and XTCE 225H-S730, 3 poles; Open type; Operating coil 24 to 500Vac, 24 to 240Vdc; 200HP max., FLA: 192A max. at 600Vac max.; General use: 250A, 600Vac. Definite Purpose rating for Type DILM185A, XTCE 185H, DILM225A, XTCE 225H (-SOND730) 336A, (2016 LRA), 480 Vac, 50/60Hz 280A, (1680 LRA), 600 Vac, 50/60Hz Accessories: Cable terminal block for DILM185A/225A, Model No. DILM225A-XKU-S and XTCEXTLA225A. Note: Optional high fault rating: 50kA, 600 Vac; 65 ka, 480Vac (350 A Breaker) 100kA, 600 Vac (350 A Class J fuse) 100kA, 600 Vac (600 A Class J fuse)

2 Page 2 of 7 Contactors, Type DILM(C) followed by 300, 400, 500 or 570, may be followed by -S; 3 poles; open type; operating coil 24 to 500V ac/dc; 600V ac max; 500A max; 500hp max; FLA: 520A max. at 600V ac; FLA: 650A max. at 480V ac; version DILMC provided with spring force connectors. Starpoint Bridge Cat.Nos. DILM500-XSI. 1. These devices are open type, 3-pole contactors intended to connect motors directly across-the-line. 2. The devices are identical in construction only the ratings are different. 3. The DILMC version is provided with an alternate clamping terminal for the integrated coil terminal. 4. Standard short-circuit rating: 30kA, 600V (when protected by 800A Class L fuse or 600A circuit breaker) 5. Optional high fault rating: 42kA, 480V (when protected by 600A circuit breaker) 100kA, 600V (when protected by 600A class J Fuse) Contactors; Types DILM(C)17-, DILM(C)25-, DILM(C)32-, DILM(C )38-, XTC E(C) 017, XTC E(C) 025, XTC E(C) 032, DILMF(C)8-, DILMF(C)11-, DILMF(C)14-, DILMF(C)17-, DILMF(C)25-, DILMF(C)32-, DILMF(C)38- ; Reversing contactor prefixes DIULM(C)17-, DIULM(C)25-, DIULM(C)32- ; Followed by -10 or -01; Operating coil 12 to 240Vdc and 24 to 240Vac, 50-60Hz; Max. rating 3ph.: 25hp at 600Vac; Max. rating 1ph.: 5hp at 240Vac; Max. rating DC: 5hp at 240Vdc; General use: 40A at 600Vac, 40A at 250Vdc; Version DILMC provided with spring force connectors. Contactor with 4 poles catalogue number DILMP32 and DILMP45 followed by -10 or -01 Special rating: 40A, 600V ac Resistance Air Heating: 40A, 600V ac Refrigerator Control: 480V 600V FLA 40A 30A LRA 240A 180A DIL L-12: 24A, 600V ac Tungsten load 24A, 600V ac General use DIL L-18: 35A, 600V ac Tungsten load 35A, 600V ac General use DIL L-20 40A, 600V ac Tungsten load 40A, 600V ac General use Mechanical Interlock catalogue number DILM32-XMV 1. These devices are open type, 3 poles contactors intended to connect motors directly across the line. They are provided with an auxiliary contact normally opened (NO) or normally closed (NC) rated A600, P DILM(C) 17, DILM(C) 25, DILM(C) 32, XTC E(C) 017, XTC E(C) 025, XTC E(C) 032, series controllers have a short-circuit rating of 22KA at 600 Vac max, when protected by a thermo magnetic circuit breaker having an interrupting rating not less than 22kA rms symmetrical amperes at 600V sized not greater than 32 Amps. 3. DILM(C) 17, DILM(C) 25, DILM(C) 32, XTC E(C) 017, XTC E(C) 025, XTC E(C) 032, series controllers have a short-circuit rating of 100KA at 600 Vac max, when used in conjunction with type C396 overload relay, when protected by Class J fuses having an interrupting rating not less than 100kA rms symmetrical amperes at 600V sized not greater than the current values of the table below: DILM(C) 17, XTC E(C) 017 DILM(C) 25, XTC E(C) 025 Max Class J Non-Time Delay Fuse 70A 100A

3 Page 3 of 7 DILM(C) 32, XTC E(C) A Contactors; Type DILM(C) 7 -, DILM(C) 9 -, DILM(C) 12 -, DILM(C) 15 -, XTC E(C) , XTC E(C) , XTC E(C) , XTC E(C) 015 ; Reversing contactors prefix DIULM(C)7-, DIULM(C)9-, DIULM(C) 12- ; Followed by 10 or 01, may be followed by - SOND 516; Operating coil 12 to 220Vdc and 24 to 240Vac; Max. rating 3ph: 10hp at 600Vac, Max. rating 1ph.: 3hp at 240Vac; Max. rating DC: 2hp at 240Vdc; General use: 20A at 600Vac, 20A at 250Vdc; Version DILMC provided with spring force connectors; Version DILMP20 provided with 4 poles. Special rating: 10A, 600Vac Resistance Air Heating 20A, 600Vac Refrigeration Control FLA 10A, 600Vac LRA 60A, 600Vac Tungsten 24A, 600Vac Special Rating for DILM(C) 7, XTC E(C) Elevator control: 3hp at 600Vac Special Rating for DILM(C) 9, XTC E(C) and DILMP20 Elevator control: 5hp at 600Vac Special Rating for DILM(C) 12, XTC E(C) and DILM(C) 15, XTC E(C) 015 Elevator control: 7.5hp at 600Vac Mechanical Interlock catalogue number DIULM12-XMV. 1. These devices are open type, 3 poles contactors intended to connect motors directly across the line. They are provided with an auxiliary contact normally opened (NO) or normally closed (NC) rated A600, P DILM(C) 7, DILM(C) 9, DILM(C) 12, DILM(C) 15, XTC E(C) , XTC E(C) , XTC E(C) , XTC E (C) 015 series controllers have a short-circuit rating of 100KA at 600 Vac max, when used in conjunction with type C396 overload relay, when protected by Class J fuses having an interrupting rating not less than 100kA rms symmetrical amperes at 600V sized not greater than the current values of the table below: DILM(C) 7, XTC E(C) DILM(C) 9, XTC E(C) DILM(C) 12, XTC E(C) DILM(C) 15, XTC E(C) 015 Max Class J Non- Time Delay Fuse 20A 20A 45A 60A Contactors; Type DILM(F)(C) 40, XTCE(C)040, DILM(F)(C) 50, XTCE(C)050, DILM(F)(C) 65, XTCE(C) 065, DILM(F)(C) 72; Reversing contactor prefix DIULM(C)40, DIULM(C)50, DIULM(C)65, DIULM(C)72; Operating coil 12 to 240Vdc and 24 to 240Vac, 50-60Hz; Max. rating 3ph.: 60hp at 600Vac; Max. rating 1ph.: 15hp at 240Vac; Max. rating DC: 20hp at 240Vdc General use: 88A max. at 600Vac, 80A at 600Vdc, ; Version DILMC provided with spring force connectors. Contactor with 4 poles catalogue number: DILMP63, DILMP80 and DILMP100. Special rating for DILM(F)(C) 40, XTCE(C)040, DILMP63, DILM(F)(C) 50, XTCE(C)050, DILMP80: Tungsten 74A, 600Vac 79A, 600V ac Resistance Air Heating: 79A, 600V ac Refrigeration Control: FLA 54A, 600V ac LRA 290A, 600V ac Special rating for DILM(F)(C) 65, XTCE(C)065, DILM(F)(C) 72, DILMP100:

4 Page 4 of 7 Tungsten 88A, 600Vac 88A, 600V ac Resistance Air Heating: 88A, 600V ac Refrigeration Control: FLA 45A, 600V ac LRA 270A, 600V ac Mechanical Interlock catalogue number DILM65-XMV. 1. These devices are open type, 3 poles contactors intended to connect motors directly across the line. 2. DILM(F)(C) 40, XTCE(C)040, DILM(F)(C) 50, XTCE(C)050, DILM(F)(C) 65, XTCE(C)065 series controllers have a short-circuit rating of 75KA at 480 V max, when protected by a thermo magnetic circuit breaker having an interrupting rating not less than 75kA rms symmetrical amperes at 480V sized not greater than 100 Amps. 3. DILM(F)(C) 40, XTCE(C)040, DILM(F)(C) 50, XTCE(C)050, DILM(F)(C) 65, XTCE(C)065 series controllers have a short-circuit rating of 100KA at 600 V max, when used in conjunction with type C396 overload relay, when protected by Class J fuses having an interrupting rating not less than 100kA rms symmetrical amperes at 600V sized not greater than the current values of the table below: Max Class J Non-Time Delay Fuse DILM(F)(C) 40, XTCE(C)040 DILM(F)(C) 50, XTCE(C)050 DILM(F)(C) 65, XTCE(C) A 200A 250A Magnetic Motor Controllers Cat. Nos. DILM(F)(C)80-, XTCE(C)080, DILM(F) (C)95-, XTCE(C)095, DILM(F) (C)115-, XTCE(C)115, DILM(F) (C)150, XTCE(C)150 and DILM(F) (C)170-; Reversing contactors prefix DIULM(C)80-, DIULM(C)95-, DIULM(C)115-, DIULM(C)150- ; followed by 10 or -01; Operating coil 24 to 240Vdc and 24 to 600Vac, 50-60Hz; Max hp ratings 3ph, 600v-125hp; 1ph, 240v-30hp; Max. DC rating: 30hp at 240Vdc. Version DILMC provided with spring force connectors. Contactor with 4 poles catalogue number DILMP125, DILMP160 and DILMP200 followed by -10 or -01 Mechanical Interlock catalogue number DILM150-XMV Terminal assembly catalogue number: ZK-DILM or DILM150-XZK Special Rating for DILM(C) 80, XTCE(C)080, DILMP 125 General use: 125A at 600Vac, 125A at 600Vdc Definite purpose: FLA=141A, 480Vac, 50/60Hz; LRA=846A, 480Vac FLA=95A, 600Vac, 50/60Hz; LRA=570A, 600Vac Resistance Air Heating: 110A, 600Vac Refrigeration Control: FLA: 90A, 480Vac; 70A, 600Vac; LRA: 540A, 480Vac; 420A, 600Vac Tungsten: Elevator control: 60hp at 600Vac Special Rating for DILM(C)95, XTCE(C)095, DILMP160 General use 125A at 600Vac, 125A at 600Vdc Definite purpose: FLA=141A, 480Vac, 50/60Hz; LRA=846A, 480Vac FLA=95A, 600Vac, 50/60Hz; LRA=570A, 600Vac Resistance Air Heating: 110A, 600Vac Refrigeration Control: FLA: 90A, 480Vac; 70A, 600Vac; LRA: 540A, 480Vac; 420A, 600Vac Tungsten: Elevator control: 75hp at 600Vac Special Rating for DILM(C)115, XTCE(C)115, DILM(C)150, XTCE(C)150, DILM(C)170, DILMP200 General use for DILM(C )115 XTCE(C)115 : 180A, 600Vac; 180A, 250Vdc General use for DILM(C)150, DILM(C)170, DILMP200: 225A, 600Vac; 180A, 250Vdc Definite purpose: FLA=200A, 480Vac, 50/60Hz; LRA=1200A, 480Vac FLA=130A, 600Vac, 50/60Hz; LRA=780A, 600Vac 160A, 600Vac

5 Page 5 of 7 Resistance Air Heating: Refrigeration Control: Tungsten: Elevator control: 160A, 600Vac FLA: 90A, 600Vac; LRA: 540A, 600Vac 160A, 600Vac 100hp at 600Vac 1. These devices are open type, 3 poles contactors intended to connect motors directly across the line. They are provided with an auxiliary contact normally opened (NO) or normally closed (NC) rated A600, P DILM(F)(C)80-, XTCE(C)080, DILM(F) (C)95-, XTCE(C)095, DILM(F) (C)115-, XTCE(C)115, DILM(F) (C)150, XTCE(C)150 series controllers have a short-circuit rating of 65KA at 480 Vac max, when protected by a thermo magnetic circuit breaker having an interrupting rating not less than 65kA rms symmetrical amperes at 480V sized not greater than 250 Amps. 3. DILM(F)(C)80-, XTCE(C)080, DILM(F) (C)95-, XTCE(C)095, DILM(F) (C)115-, XTCE(C)115, DILM(F) (C)150, XTCE(C)150 series controllers have a short-circuit rating of 100KA at 600 Vac max, when used in conjunction with type C396 overload relay, when protected by Class J fuses having an interrupting rating not less than 100kA rms symmetrical amperes at 600V sized not greater than the current values of the table below: DILM(C) 80, XTC E(C) 080 DILM(C) 95, XTC E(C) 095 DILM(C) 115, XTC E(C) 115 DILM(C) 150, XTC E(C) 150 Max Class J Non-Time Delay Fuse 300A 350A 450A 600A Contactors; Type DILM, may be followed by C, followed by 185, 225, 250, 300A, may be followed by S; 3 poles; Open type; Operating coil 24 to 500Vac/dc; 600Vac max.; 350A max.; 300HP max.; FLA: 300A max. at 600Vac; FLA: 360A max. at 480Vac; Version DILMC provided with spring force connectors. 1. These devices are open type, 3-pole contactors intended to connect motors directly across-the-line. 2. The devices are identical in construction only the ratings are different. 3. Standard short-circuit rating: 18kA, 600V (when protected with 700A Class L fuse or 600A circuit breaker) 65kA 480V (when protected with 250A circuit breaker) AC Across-the-Line magnetic Motor Starters, reversing and non-reversing, incorporating manual motor controller PKZM0, designated Cat. No. MSC-, followed by D or R-,followed by 0.25, -0.4, -0.63, -1.0, -1.6, -2.5, -4.0, -6.3, -10, -12, -16, 25, 32 followed by M7, M9, M12, M15, M17, M25 and M32, may be followed by SOND 516. Direct Starter Set PKZM4-XD M65. PKZM0-XD M32, PKZM0-XR M12, PKZM0-XS M32. AC Across the line Motor Controllers, Cat. No. MSC-, followed by D or R-, followed by 0.25, 0.4, -0.63, -1.0, -1.6, -2.5, -4.0, 6.3, -10, -12, -16, -25, -32 followed by M7, M9, M12, M15, M17, M25 and M32, followed by (230V 50Hz) or (24VDC), followed by /BBA. Combination Motor Controllers, type F, Model nos. PKE65 may followed by /AK, followed by /XTU (W) followed by 32 or 65, followed by SP and magnetic contactors DILM (17, 25, 40, 50, 72). Cat. No. XTPE followed by 032D or 065D followed by CSSP and magnetic contactors XTCE(C) 017, 025, 040, 050, 072. PKE65-32-SP + DILM (17, 25): Rated: 32A at 600Vac; 25HP max. At 600Vac max, 3 phases; 3HP max at 240Vac, 1 phase; 25kA, 600V (wyes)/347vac; 65kA, 480V (wyes)/277vac

6 Page 6 of 7 PKE65-32-SP + DILM (17, 25): Rated: 32A at 600Vac; 25HP max. At 600Vac max, 3 phases; 3HP max at 240Vac, 1 phase; 25kA, 600V (wyes)/347vac; 65kA, 480V (wyes)/277vac. PKE65-65-SP + DILM (40, 50, and 72): Rated: 58A at 600Vac; 40HP max. At 600vac max, 3 phases; 10HP max at 240Vac, 1 phase; 65kA, 480V (wyes)/277vac. Note: 1. The combination motor controller can be provided with already certified auxiliary switches. 2. Type designation XTPE is an alternate type designation for PKE65- Magnetic Contactors vacuum contact chamber, Types DILM 580, DILM 650, DILM 750, DILM 820, DILM 1000, DILM Suppressor protective units DILM(H) - - XSM Coil V ac/dc, V ac/dc, 24-48V dc and V ac/dc. Ratings: DILM General Use 630A, 600V ac; Short Circuit Withstand Rating 85kA, R.M.S. Symmetrical, 600V DILM General Use 700A, 600V ac; Short Circuit Withstand Rating 85kA, R.M.S. Symmetrical, 600V DILM General Use 800A, 600V ac; Short Circuit Withstand Rating 85kA, R.M.S. Symmetrical 600V DILM

7 Page 7 of 7 General Use 850A, 600V ac; Short Circuit Withstand Rating 85kA, R.M.S. Symmetrical 600V (Standard fault). DILM General Use 1000A, 600V ac, Max FLC 1000A, Max LRA 6000A Short Circuit Withstand Rating 85kA, R.M.S. Symmetrical 600V (Standard fault) DILM General Use 1600A, 600V ac, Max. FLA 1600A Short Circuit Withstand Rating 85kA, R.M.S. Symmetrical 600V (Standard fault) Note: These devices are open type, 3-pole contactors intended to connect motors directly across-the-line. These contactors are vacuum contactors. Contactors, Type DILH 1400, DILH 2000, DILH 2200, DILH2600, 3 pole, open type, for Air Heating and general purpose applications DILH1400: 1400A, 600V ac, DILH2000: 2000A, 600V ac and DILMH2200: 2200A, 600V ac; DILH2600, 2600A, 600Vac. Coil rated V AC/DC, V, AC/DC, V ac/dc, 24-48V dc, Vacuum contactor construction. With the following options: Suppressor protective units DILH - - XSM and Voltage peak limitation unit Sond715 for DILH The DILH 1400 has been tested for operations in endurance for 600V ac, 1400A, resistive. 2. The DILH 2000 has been tested for operations in endurance for 600V ac, 2000A, resistive. 3. The DILH2200 has been tested for operations in endurance for 600V ac, 2200A resistive. 4. The DILH 2600 has been tested for operations in endurance for 600vac, 2600A, resistive. 5. The DILH 1400, DILH 2000, DILH2200, DILH2600 may be marked "INDUSTRIAL HEATING CONTROL".