High-Speed Parallel Twin-Spindle CNC Lathe

Size: px

Start display at page:

Download "High-Speed Parallel Twin-Spindle CNC Lathe"

Roberta Watts
6 years ago
Views:

1 High-Speed Parallel Twin-Spindle CNC Lathe

Suitable for reduced and optimized cycle time! RAKU-RAKU loader 3 and RAKU-RAKU monitor 3 are standard accessories. TT-200G is a face and back turning cell supporting the 8 chuck size.

2 Suitable for reduced and optimized cycle time! RAKU-RAKU loader 3 and RAKU-RAKU monitor 3 are standard accessories. TT-200G is a face and back turning cell supporting the 8 chuck size. TT-200CMG having additional milling function can configure a combined process integrating cell that provides high versatility. T-200G is a face or back turning cell, and it will be suitable as an odd-process cell system if linked with the TT-200G. RAKU-RAKU loader 3 and RAKU-RAKU monitor 3 are standard accessories. Improved operability and workability! High Speed Loader Feedrate (longitudinal) 120 m / min 8 Chuck Type Machine One-Spindle One-Turret Selectable Twin CNC 8 Chuck Type Machine Loader, work stocker, turnover unit, chip conveyor, air blower, counter, etc. necessary for automatic operation using the loader are all equipped as standard. Twin-Spindle Twin- Turret High Speed Linkage Variations Loader Feedrate (longitudinal) 120 m / min Selectable Chuck Size 8 Spindle + Turret Type Standard Spindle + Standard Turret Spindle with C-Axis + Turret with Milling Function Process variations (A, B, C, D, odd number) are selectable. (B) Note : The number of spindles and process variations vary depending on the model. Low Cost Loader, work stocker, turnover unit, chip conveyor, air blower, counter, etc. necessary for automatic operation using the loader are all equipped as standard. (B) Photo shows (A type) with options. Photo shows (A type) with options. Spindle Speed and Output Characteristics Gantry Loader Work Feeder (Standard Type) C Note: Variation C is optional. 1 (Standard or Optional Main Spindle Motor) Variations Machine Gantry Loader Work Feeder (Standard Type) D (Twin Loader) Note: Variation C is optional. 2 Machine For Variations

Tooling System Interference Drawing and Operating Range Unit : mm inch Rotary Tool Holder (X) Rotary Tool Holder (Z) Offset U-Drill Holder U-Drill Holder Drill Collet Tapping Collet

Boring bar/drill holder and U-drill holder are available with standard type and offset type.

Standard Turret (All-Holder Type 10-Station Turret) Max. Swivel Dia. 12.60" 10.24" 5.91" 5.91" 5.91" 4.84" 5.12" Max. Turning Dia. Spindle Center 4.72" 4.13" 1.38" Z-Axis Ref. Point 12.

38" 4.72" 5.51" 1.57" X-Axis Stroke 5.91" 0.39" X-Axis Ref. Point Z-Axis Ref. Point 3.15" 12.

With The Milling Function (All-Holder Type 10-Station Turret, Five Rotary Tools at Every Two Stations) Applicable to TT-200CMG/T-200CMG Photo shows the left side (L) of TT-200CMG. 6.

46" 52.76" 85.91" 32.09" 1.06" 84.80" 37.99" 13.78" 37.99" 17.52" 17.52" 14.76" 17.52" 37.99" 47.52" 45.28" 47.52" 45.28" 81.89" 87.80" 121.97" 99.72" 81.89" 87.80" 121.89" 99.72" 4.

3 Tooling System Interference Drawing and Operating Range Unit : mm inch Rotary Tool Holder (X) Rotary Tool Holder (Z) Offset U-Drill Holder U-Drill Holder Drill Collet Tapping Collet Drill Tap Oil Hole Drill U-Drill U-Drill All-Holder Type 10-Station Turret Servomotor-driven high-speed indexing system. Boring bar/drill holder and U-drill holder are available with standard type and offset type. For the turret with the milling function (turret with spindle C-axis control is optional), the X-axis and Z-axis rotary tool holders are optionally available. Standard Turret (All-Holder Type 10-Station Turret) Max. Swivel Dia " 10.24" 5.91" 5.91" 5.91" 4.84" 5.12" Max. Turning Dia. Spindle Center 4.72" 4.13" 1.38" Z-Axis Ref. Point 12.20" " 3.15" 1.97" 6.73" Spindle (L) X-Axis Stroke 5.91" 0.39" X-Axis Ref. Point is only Spindle (R) " Spindle (R) 3.54" 3.15" 6.73" 0.28" 5.28" 1.65" 3.35" 0.47" 4.13" 1.38" 4.72" 5.51" 1.57" X-Axis Stroke 5.91" 0.39" X-Axis Ref. Point Z-Axis Ref. Point 3.15" 12.20" 10-Station Turret Offset Boring Bar/Drill Holder Boring Bar/Drill Holder Facing Holder OD Tool Holder Boring Bar Bush Drill Boring Bar Boring Bar OD Turning and Facing Tool Turret With The Milling Function (All-Holder Type 10-Station Turret, Five Rotary Tools at Every Two Stations) Applicable to TT-200CMG/T-200CMG Photo shows the left side (L) of TT-200CMG. 6.10" 4.13" Max. Swivel Dia. Floor Plan Machine Dimensional Drawing Unit : mm inch 59.06" 33.41" 9.39" " 66.06" 22.83" 1.65" 89.76" " 32.09" 1.06" 84.80" 59.06" 33.41" 9.39" " 66.06" 22.83" 1.65" 1.46" 52.76" 85.91" 32.09" 1.06" 84.80" 37.99" 13.78" 37.99" 17.52" 17.52" 14.76" 17.52" 37.99" 47.52" 45.28" 47.52" 45.28" 81.89" 87.80" " 99.72" 81.89" 87.80" " 99.72" 4.53" 1.69" 4.02" 12.60" 5.91" 4.84" 5.91" 5.12" 5.91" 10.24" Max. Turning Dia. Spindle Center 4.13" 1.38" 4.72" 12.20" Z -Axis Ref. Point 3.15" 4.02" 1.69" 1.57" Spindle (L) 1.57" 3.15" 1.97" 6.73" X-Axis Stroke 5.91" 0.39" X-Axis Ref. Point is only Spindle (R) " Spindle (R) 3.54" 3.15" 6.73" 0.28" 5.28" 1.65" 3.35" 0.47" 0.57" 4.13" 4.72" 1.38" 1.57" X-Axis Stroke 5.51" X-Axis Ref. Point 0.39" 5.91" Z-Axis Ref. Point 3.15" 12.20" 3 4

4 Machine Specifications (With A or B Type Loader) Items Capability Travel Spindle Turret Rotary Tool Feedrate Motor Required Power Tank Capacity Machine Size [ - ] are not provided. Distance Between Spindles mm inch " - Maximum Turning Diameter mm inch " " Maximum Turning Length mm inch " " X-Axis Travel mm inch Z-Axis Travel mm inch Number of Spindles 2 1 Spindle Speed min ~ 4000 *1 40 ~ 4000 *1 Spindle Nose (Nominal Code) JIS A2-6 JIS A2-6 Through-Hole Diameter mm inch " " Bearing Inside Diameter mm inch " " Number of Turrets 2 1 Type of Turret 10-Station All-Holder Type 10-Station All-Holder Type Number of Attachable Tools Height of Square Tool Shank mm inch 25 1" 25 1" Diameter of Boring Bar Shank mm inch /2" /2" Number of Power Tools - Alternate 5 pcs - Alternate 5 pcs Spindle Speed min ~ ~ 2500 Maximum Tool Shank Diameter mm inch " " Tool Spindle Taper Hole (Type, Nominal Code) - AR25 - AR25 Tool Spindle Bearing ID mm inch " " Rapid Traverse Rate m/min inch/min X:24 / Z:24 X:944.88" / Z:944.88" X:24 / Z:24 X:944.88" / Z:944.88" Jog Feedrate mm/min inch/min X,Z:0 ~ 1260 X,Z:0 ~ 49.61" X,Z:0 ~ 1260 X,Z:0 ~ 49.61" Main Spindle Motor (30 min/coninuous) kw HP 7.5/5.5 10/7.3 *1 7.5/5.5 10/7.3 *1 Rotary Tool Spindle Motor (10 min/continuous) kw HP - 3.7/1.1 5/ /1.1 5/1.46 Feed Axis Motor kw HP X:1.2 / Z:1.8 X:1.6 / Z:2.4 X:1.2 / Z:1.8 X:1.6 / Z:2.4 Hydraulic Pump Motor kw HP Coolant Pump Motor kw HP Electric Power kva Air Pressure Source Mpa, NL 0.4, , 150 Hydraulic Unit Tank L gal Lubricant Tank L gal Coolant Tank L gal Machine Height mm inch " " Floor to Spindle Center Height mm inch " " Required Floor Space mm mm inch inch " " " " Machine Weight *2 kg lbs Loader Specifications (A or B Type) Outside Diameter mm inch Target Workpiece Length mm inch " " Weight kg lbs ( 2) ( 2) X-Axis (longitudinal) mm inch (m/min) " (120) "(120) Travel (Running Speed) Y-Axis (vertical) mm inch (m/min) " (100) " (100) Z-Axis (cross) mm inch (m/min) " (50) " (50) Hand Type 3-Jaws 3-Jaws Stroke mm inch φ " φ " Workpiece Feeder Specifications Number of Pallets (3 Guide Bars/Pallet) Loading Capacity (Per Pallet) kg lbs Maximum Height mm inch " " Machine Standard Accessories Splashguard Hydraulic Unit 2 Footswitch for Hydraulic Unit 2 1 Coolant Unit (250W) 2 1 Lighting Apparatus Working Tool Set Instruction Manual 8 Solid Chuck and Cylinder 2 1 Chuck Auto Open-Close Function 2 1 Chuck Airblow (Outside Spindle) 2 1 Signal Tower Light (3-Color) 2 1 Chip Conveyor (Caterpillar Type/Rear Discharge) Total Counter 2 1 Tool Holders (Selectable for OD Turning & Facing, or Boring Bar/Drill) 10 5 Automatic Power-Off System Gantry Loader Work Feeder * Circled numbers indicate the quantity. Machine Optional Accessories Rotary Tool Holder (for X-Axis) *3 Rotary Tool Holder (for Z-Axis) *3 Collet (for Rotary Tool) *3 OD Turning and Facing Tool Holder Boring Bar/Drill Holder Offset Boring Bar/Drill Holder U-Drill Holder Offset U-Drill Holder Boring Bar Bush Drill and U- Special Chuck Spindle Motor : 15/11kw 3200/4000min -1 Spindle Motor : 11/7.5kw 2500/3200/4000min -1 Spindle Motor : 7.5/5.5kw 2500/3200min -1 Spindle Orientation (Disk Brake Type (Max. 360 Point) with M-Function) Coolant Unit (400W) Chip Conveyor (Side Discharge) Chip Bucket *1 : Optional specification is refer to "Machine Optional Accessories". *2 : Work feeder, coolant tank, and chip conveyor are not included. *3 : Applied to TT-200CMG/T-200CMG * For other optional accessories, please contact us. NC Unit Specifications Multiple Thread Cutting Backlash Compensation by Rapid Traverse Thread Cutting Cycle and Retraction / Feedrate Continuous Thread Cutting Editing FANUC : 0i-TD, 0i-TD(2) Variable Lead Thread Cutting Part Program Memory Capacity 521Kbyte (1280m) *13 Reference Point Return (G28) Reference Point Return Check (G27) Part Program Memory Capacity 1Mbyte *14 Please contact our sales persons for further information. 2nd Reference Point Return (G30) Registrable Programs, 400 Programs *13 3rd, 4th Reference Point Return Registrable Programs, 800 Programs *14 Program Editing Composition Feed Functions Program Protection Rapid Traverse Override (F0,25%,50%,100%) Specifications Contents TT-200 T-200 Extended Program Editing Feed Per Minute NC Unit Background Editing Feed Per Revolution 0i-TD(2) Loader A, B, C Type NC + 0i-TD 0i-TD(2) Setting/Display Constant Tangential Speed Control Unit 0i-TD(2) Cutting Feedrate Clamp Status Display Loader D Type - + 0i-TD Automatic Acceleration/Deceleration Clock Function Screen (8.4" Color LCD/MDI) Rapid Traverse Bell-Shaped Accel/Decel Current Position Display Program Comment Display (31 Characters) Software Linear Accel/Decel After Feedrate Interpolation Parameter Setting and Display RAKU-RAKU Monitor 3 Feedrate Override (15 Steps) Alarm Display RAKU-RAKU Loader 3 Jog Override (15 Steps) Alarm Log Display Measurement Monitor 3 *1 Override Cancel Operator Massage Log Display Safety Devices Manual Feed Per Revolution Operation Log Display Front Door Interlock Program Input Run Hours and Parts Count Display Front Door Locking Mechanism Tape Code (EIA/ISO Auto Recognition) Actual Speed Display Safety Relay Label Skip Actual Spindle Speed and T Code Display Control Panel Breaker with Tripper Parity Check Floppy Cassette Directory Display Control In/Out Grouped Directory Display and Punching Optional Block Skip, 1 Piece Main Function List Servo Adjustment Screen Optional Block Skip (2 to 9 Pieces) Maintenance Information Screen Program Number O4 Digits Controlled Axes Data Protection Key, 1 Kind Sequence Number N5 Digits Least Input Increment *2 Help Function Absolute/Incremental Command Maximum Programmable Dimension Self Diagnostic Function Decimal Point Input/ (± ) Pocket Calculator Type Decimal Point Input Scheduled Maintenance Screen Cs Contour Control CM Diameter/Radius Programming (X-Axis) Hardware & Software System Configuration Display Least Input Increment C *3 Coordinate System Setting (G50) Graphic Display Inch/Metric Selection Auto Coordinate System Setting Dynamic Graphic Display Interlock Drawing Dimension Direct Input *10 Display Languages Machine Lock *4 G-Code System A English Emergency Stop G-Code System B/C Other language *17 Stored Stroke Check 1 Chamfering/Corner R Programming *11 Display Language Dynamic Switching Stored Stroke Check 2, 3 *5 Programmable Data Input Data I/O Stroke Limit Check Before Movement Sub Program Call (10 Levels) Reader/Puncher Interface for 1ch Chuck Tailstock Barrie *6 Custom Macro Fast Data Server Mirror Image (Each Axis) Additional Custom Macro Common Variables External Message Chamfering ON/OFF Single Canned Cycle External Workpiece Number Search Overload Detection *7 Combined Canned Cycle Memory Card I/O Position Switch Combined Canned Cycle Ⅱ : Standard : Optional : Special - : None Operation Drilling Canned Cycle : Parameter setting is required. Auto Run (Memory) (Note: Normally, the parameters need not to be changed. If the Arc Radius Programming parameters are to be set or changed, understand completely the MDI Run Macro Executor *12 functions of such parameters. Wrong setting could cause the machine DNC Run *8 Coordinate System Shift to be moved unexpectedly, resulting in machine or workpiece damage or personal injury.) DNC Run with Memory Card *8 *9 Coordinate System Shift Direct Input CM : C-Axis/Milling Standard Specification. Program Number Search Miscellaneous Functions/ Sequence Number Search Spindle Functions *1) I/O addition and the PC change are necessary. Sequence Number Collation and Stop M Function (M3 Digits) *2) 0.001mm inch 0.001deg(for CM type) Wrong Operation Preventive Second Miscellaneous Function (B Function) *3) IS-C mm deg inch. Buffer Register Spindle Functions (S4 Digits) *4) Addition of switch is required. Dry Run Constant Surface Speed Control *5) Not coexistent with chuck tailstock barrier. Single Block Spindle Orientation *6) Not coexistent with Stored Stroke Check 2, 3. *7) Required when RAKU-RAKU Monitor 3 is used. Jog Feed Rigid Tap (Spindle Center) *8) DNC run mode transfer switch is required. Manual Reference Point Return Rigid Tap (Rotating Tool) CM *9) CF card and adaptor is required. Dogless Reference Point Setting Tool Functions/Tool Offset Functions *10) Not coexistent with chamfering/corner R. Manual Handle Feed, 1 Unit T Function (T2+2 Digits) *11) Not coexistent with drawing dimension direct input. Interpolating Functions Tool Offsets, 64 Pieces *13 *12) Required when RAKU-RAKU Monitor 3/RAKU-RAKU Loader 3 is used. Positioning (G00) Tool Offsets, 99 Pieces *13) Sub NC.(TT-200) Exact Stop Mode (G61) Tool Offsets, 128 Pieces *14 *14) Main NC Two system total number. Tapping Mode (G63) Tool Position Offset *15) Tool setter is required. Cutting Mode (G64) Tool Diameter/Nose R Compensation *16) Cannot be used when RAKU-RAKU Monitor 3 is installed. Exact Stop (G09) Tool Geometry/Wear Compensation *17) Japanese (Kanji), German, French, Spanish, Italian, Linear Interpolation (G01) Tool Offset Counter Input Chinese (traditional), Chinese (simplified), Korean, Portuguese, Dutch, Danish, Swedish, Hungarian, Czech, Circular Interpolation (G02/03) Tool Offset Measured Value Direct Input Polish, Russian, Turkish Dwell (G04) Tool Offset Measured Value Direct Input B *15 Polar Coordinate Interpolation CM Tool Life Management *16 Cylindrical Interpolation CM Accuracy Offset Functions Thread Cutting Backlash Compensation 5 6

5 TAKISAWA MACHINE TOOL CO., LTD. 983 Natsukawa, Kita-ku, Okayama , JAPAN Telephone : (81) Fax : (81) Website : tkj-1@takisawa.co.jp (America) tkj-2@takisawa.co.jp (Europe) tkj-3@takisawa.co.jp (Asia) Japanese laws prohibit this machine from being used to develop or manufacture weapons of mass destruction or conventional arms, as well as from being used to process parts for them. Export of the product may require the permission of governmental authorities of the country from where the product is exported. Should you wish to resell, transfer or export the product, please notify Takisawa Machine Tool Co., Ltd. or our distributor in advance. *The appearance, specifications, and relevant software of the product are subject to change for improvement without notice. *Please make an inquiry to our sales representatives for details of the product. NC56E1009EA2000A Overseas Network THAILAND INDONESIA INDIA CHINA USA GERMANY ENGLAND Takisawa (Thailand) CO.,LTD. Telephone : (66) Fax : (66) Takisawa Machine Tool Indonesia Representative Office Telephone : (62) Fax : (62) SAP Takisawa Machine Tools Private Ltd. Takisawa Mchine Tool India Liaison Office Telephone : (91) Fax : (91) Takisawa (Shanghai) Co., Ltd. Telephone : (86) Fax : (86) Takisawa, Inc. Telephone : (1) Fax : (1) Takisawa Machine Tool Germany Representative Office Telephone : (49) Fax : (49) Takisawa UK Ltd. Telephone : (44) Fax : (44)

TAKISAWA TWIN CHUCKER. TT-Series. Parallel Twin-Spindle CNC Lathe. 12in/10in

TAKISAWA TWIN CHUCKER. TT-Series. Parallel Twin-Spindle CNC Lathe. 12in/10in TAKISAWA TWIN CHUCKER TT-Series Parallel Twin-Spindle CNC Lathe 12in/in Heavy-Duty Cutting Improves the Productivity Takisawa twin-chucker TT-0G is a parallel 2-spindle CNC lathe for high-accuracy mass