VNSO MILL DUTY JOYSTICK CONTROLLER
|
|
- Ernest Antony Logan
- 6 years ago
- Views:
Transcription
1 VNSO MILL DUTY JOYSTICK CONTROLLER Application: The type VNSO Joystick controllers are characterized by their unmatched versatility and rugged construction. They are actively providing directional and speed control of AC/DC Drives, Electro-ydraulics, or any other devices requiring a manually selectable proportional output. Some applications include: Cranes, Lifts, oists, Mobile Transporters, Mining Vehicles, Excavating and Logging Equipment. Features: Rugged Construction: Nickel Chromium gimbal mechanism, case hardened bearings and operation shaft. Mechanical Life: 20 million cycles. Design Flexibility: Contact and drive locations can be selected to accommodate available panel space. Tandem drive arrangement available for mounting at end or at base of controller. Multi-Axis Control: 1 and 2 axis controllers for separate or simultaneous operation. Both standard and custom switching patterns available. andles: Variety of handle styles and handle operated deadman functions. Precise Step Control: Up to individually detented steps in each axis. Contacts: (10) Snap in 16A 240VAC double pole field replaceable contacts. Type V3 form C, DC, and gold low voltage type contacts available. Potentiometers: 0.5 watt 5 million revolution s furnished standard, other types available upon request. Electronics: ESS-420: 4-20 milli-amp 2 wire transmitter. ESS : 0-10 and ±10V amplifiers. Absolute : Bit 24VDC gray code. PFC and PFC/CR Proportional Feathering Control electronic amplifiers for operation of Electro-ydraulic Proportional Valves. Enclosures: Variety of standard and custom steel and fiberglass enclosures available; NEMA 1, 3R,12 and 13. Pub. # 20.C1 Stratford, CT JRMC 406
2 VNSO ORDERING INFORMATION Basic Assembly: 5 ½ long shaft, 2-piece handle, boot and mounting plate supplied standard. Contact Drive Arrangements: See VNSO dimensions for selecting contact drive mounting arrangements. andle: Reference handle section for handle options and custom grips. Standard Shaft Length: 4 1/, 5 1/2, 7 1/ (measured from mounting surface to top of handle.) Contacts: Each contact block supplied with 2 SPST contacts. Output Devices: Potentiometers: Electronics: : Transformer: 0.5 watt 5 million revolutions furnished standard. Specify resistance and type required (Consult factory for custom requirements). See Proportional Feathering Control (P.F.C.) and PFC/CR electronics for ordering information. See Bit gray code absolute encoder information sheet. See 1, 2 &3 Rotary Inductive Differential Transformer information sheet. VNSO TECNICAL DATA MECANICAL: Operating Temperature: -25 o -+70 o C Detented Positions: Up to Steps Gear Ratio: 3.5:1 VNSO andle deflection ±36 o, cams and s +126 o (Other angles available consult factory) Mechanical Life: 20 million plus operations CONSULT FACTORY FOR: LO VOLTAGE GOLD, V3 FORM C, AND DC RATED CONTACTS) ELECTRICAL: Contacts: Up to 10 double pole snap in blocks i.e. 20 circuits for each axis. (Consult factory if additional circuits required). Rating AC: a) AC continuous V b) AC resistive 240V c) AC inductive 6 240V d) 1.P. 120VAC 1 phase e) 2.P. 240VAC 1 phase Max. Switching Capacity: Making amps Breaking - (0.7PF) 0 amps 240V Electro-Mechanical Life: Breaking AC current a) Resistive: 1 million amps 240V 10 million 2 amps 240V b) Inductive: 1 million 6 amps 240V 10 million 2 amps 240V Approvals: CSA file number: UL Recognized file number: E10673 (M) Pub. # 20.C3 Stratford, CT JRMC 406
3 VNSO DIMENSIONS [ 4.] or M4 Thread ~3.00 ~[76] 7.09 [10.0] 4.33 [110.0] 5.71 [145.0] 1.16 [29.4] 2.64x 3.49[.5].45 [11.4] [ 5] 2.75 [69.7] Sq. BOTTOM VIE SIDE VIE TOP VIE 4xM Drive rotation ±105 VNSO-E VNSO-G VNSO-V SQ VNSO- Dimension or (mm) VNSO-M 1.3 VNSO-GG [0] Detent [ 0.0] MOUNTING DETAIL andle angle and deflection shown with standard handle [ 4.] or M4 Thread in mm [145] [10] [42] 2.21 [56] 2.70 [69] 3.04 [77] 3.09 [79] 3.20 [1] 2.70 [69] 3.45 [] 3.37 [6] 3.3 [97] 3.90 [99] 4.05 [103] [5] 3.20 [1] 4.14 [105] 4.04 [103] 4.62 [117] 4.71 [120] 4.90 [124] Double Pole Contacts Blocks Stratford, CT Pub. # 20.C4 211
4 VNSO-A, -EA, -AA, DIMENSIONS VNSO-A.45 [11.4] 1.16 [29.4] 2.64x 3.49[.5] 7.09[10.0] 4x M4 VNSO-EA 7.09[10.0] Standard direction for terminal location specify other directions max.42 [135.0] max Sq. [ 5] VNSO-AA 7.09[10.0] 2.66 [67.5] Drive rotation ±105 hen using in dual axis configuration add " to overall length max.42 [135.0] max. Dimension or (mm) 1.3 [0] Double Pole Contacts Blocks Stratford, CT Pub. # 20.C5 211
5 VNSO-GGAA, -GGEA DIMENSIONS VNSO-GGAA VNSO-GGEA c-d a b c d c a d b 7.09 [10] 5.71 [145] 7.09 [10] 5.71 [145] [5] 3.00 [76] c-d a-b 1.16 Potentiometer or encoder for one handle only 2.64[67] x 3.4[.5] Dimension or (mm) a-b [ 4.] 1.3 [29.4].45 [11.4] MOUNTING DETAIL [69.0] [0] [ 5] [54.0] 2.6 [ 6.0] andle angle and deflection shown are for 7.125"(10mm) with standard handle Detent [67.5] Drive rotation ± [115] 4.13 [105] 4.53 [115] [135] [135] ~ in ~ mm Double Pole Contacts Blocks Stratford, CT Pub. # 20.C6 211
VCSO COMPACT / RUGGED JOYSTICK CONTROLLER
VCSO COMPACT / UGGED JOYSTICK CONTOLLE Construction: The TYPE VCSO Joystick Controller is rugged, compact and offers excellent application versatility. VCSO Joysticks are utilized where precise proportional
More informationPRO-6 HEAVY-DUTY SINGLE AXIS JOYSTICK CONTROLLER
PO-6 HEAVY-DUTY SINGLE AXIS JOYSTICK CONTOLLE PO-6 Single Axis Heavy-Duty Joystick PO-6H Single Axis Heavy-Duty Hall-effect Joystick Construction: The ultra-rugged PO-6 provides precise proportional control
More informationRLS - 51 Geared CAM Limit Switches
RLS - 5 Geared CAM Limit Switches 2 Page Title www.powerjacks.com Power Jacks is the largest and most experienced manufacturer of actuators and mechanical jacks in the UK. Our products are used in a wide
More informationCS3 ULTRA COMPACT EXTREMELY RUGGED JOYSTICK CONTROLLER
S3 ULT OMPT ETEMELY UGGE JOYSTIK ONTOLLE S3 S3H S3/ Hall-effect joystick Heavy duty Hall-effect joystick ang / bang onstruction: The S3 is an extremely rugged Joystick in an ultra-compact and versatile
More informationIndustrial Electric Actuators AC and DC Voltages Nm/ inch lbs
Industrial Electric Actuators AC and DC Voltages 30-200Nm/265-1770 inch lbs Features Quarter turn (90 ) operation with mechanical travel stops Type 4X/IP67 weatherproof aluminum alloy enclosure Highly
More informationScrew. Nut Guide. Features
Actuator Controls Rotary Limit Switches SKA Series Rotary Limit Switch Screw Traveling Nuts Input Shaft Nut Guide Gear Precision Available in two control voltage ratings: 250 or 480, and in three gear
More informationZ1 axis pot. (Rocker pot.) side operation. SW1 (ON when pushed)
Single, Dual, Triple or Quad Axis Position Hold or Spring Return Multiple Pushbutton Options Center and/or Directional Micro-Switches Center and/or Positional Detents 5 Mio. Operations Mechanical Life
More informationJC 300 MULTI-AXIS FINGERTIP JOYSTICK
JC 300 MULTI-AXIS FINGERTIP JOYSTICK Developed for those applications where weight and functionality are paramount, the JC300 offers switched or proportional fingertip control in up to three axes. Designed
More informationMulti-axis controller V 8 / VV 8
Multi-axis controller V 8 / VV 8 /30 03 The multi-axis controller V 8 is a rugged switching device according IEC/EN 947-5- for electro-hydraulic applications.the modular design enables the switching device
More informationResistive Joysticks Standard and Miniature
Resistive Joysticks Standard and Miniature CH Products Resistive Joystick is a low profile potentiometric controller providing unwavering multi-axis finger-positioning control. Available in two sizes,
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
More informationCompact Electric Actuators AC and DC Voltages 18 Nm/160 inch lbs
Compact Electric Actuators AC and DC Voltages 18 Nm/160 inch lbs Features Miniature industrial quality quarter turn (90 ) rotation Excellent power to size ratio only 4.6 H x 3 D Type 4X and IP67 weatherproof
More informationGKN Stromag Light Cam / Light Cam M Geared Cam Limit Switches
Product catalogue Controls and Sensors GKN Stromag Light Cam / Light Cam M Geared Cam Limit Switches Intergrated Powertrain components, Systems and Solutions Couplings Clutches Gearboxes Driveshafts Brakes
More informationIce Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...
Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in
More informationModel 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
More informationSolving your relay requirements since 1922
Expected Life @ 25 C: 100,000 operations minimum at rated loads Solving your relay requirements since 1922 C Series TDR Solid state analog circuitry Delay on operate timing mode Compact size Relay output
More informationRT300 Series Crane & Hoist Joystick. RunnTech. Potentiometer: ±32, Hall sensor: ±20
Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick RT00 Series Crane & Hoist Joystick Product Features Single axis or dual axis control; Pure silver contacts to ensure durable; Spring return
More informationSERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
More informationHG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
More informationNEW. TURCK Inductive Sensors - Specialty DS20
TURCK Inductive Sensors - Specialty DS0 Sensor Selection Part Number Material Housing: Sensing Face: Connector: Chrome Plated Brass Field Wireable Connector(S578/S579): PBT Conduit Adapter (S578/S579):
More informationS HORT FORM. Catalog
S HORT FORM Catalog Grips and Joysticks The OTTO Controls product line includes Pushbutton, Rocker, Toggle, Limit, Rotary, Pendant, Basic and Special Purpose switches, Control Grips, Hall Effect switches
More informationBulletin 700-P, 700DC-P Industrial Relays
Bulletin 700-P, 700DC-P Industrial Relays Bulletin 700 P Direct Drive Convertible Contact Cartridge Relays NEMA and IEC ratings 600V maximum AC/DC Accessories for field installation: contact cartridges,
More informationCrane Control Contactors and Relays
October 8 DC Relays Type KC Heavy-Duty Mill 75 Contact Conversion The fully visible contacts have NEMA ICS--5 heavy-duty interrupting ratings and are easily converted in the field using just a screwdriver
More informationMINIATURE Z-AXIS HALL EFFECT JOYSTICK
MINIATURE Z-AIS HALL EFFECT With Pushbuttons Z-Axis Without Pushbuttons The Z-Axis Miniature Series Hall Effect Joystick allows for a 6 rotational movement of the knob at the top of the joystick. Z-Axis
More informationVersatile Safety Interlock Switch with Guard Door Locking
R Conforms to EN1088, EN60947-5-1, EN292, EN60204-1 UL and C-UL listed, BG approved Versatile Safety Interlock Switch with Guard Door Locking High locking force of 450 pounds locks guard door shut until
More informationType 330SA High-Performance Electric Actuator
April 2000 Bulletin 61.5:330SA Type 330SA High-Performance Electric Actuator The Type 330SA High-Performance Electric Actuator (figure 1) is a high speed, high accuracy actuator that is suited for a wide
More informationPL-1746-C02. PL-1746 Series Features
PL-1746 Series PLµ S Controls Div. PLµS Plug-In Modules for the Allen-Bradley SLC-500 PLC PL-1746-C01 PL-1746-C02 PL-1746-C03 PL-1746-C04 The PLµS PL-1746 Series Plug-In Modules for Allen- Bradley PLC
More informationORDER GUIDES WITH STEEL ROD ACTUATORS WITH HIGH STRENGTH THERMOPLASTIC ROD ACTUATORS*
For application help: call 1-800-537-6945. Honeywell MICRO SWITCH Sensing and Control 89 Style 1 Style 2 Style 3 Style 4 Style 5 Style 6 Style 7 Style 8 Automatically cut power when service door or drawer
More informationAZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
More informationProducts :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Hydraulic/Magnetic Circuit Breaker B-Series B-Series PDF elibrary The B-Series hydraulic/magnetic circuit breakers are compact and
More informationSYSTEMS ELECTRONICS GROUP
SYSTEMS ELECTRONICS GROUP SYSTEMS M4500 MACHINE COMPONENTS RSV34-MS1 RESOLVER with MS CONNECTOR Brushless, Single-turn Resolver Rated to 3,000 RPM Rotary Position Transducer for M4500, M4020, M4040, M4041,
More informationMICRO SWITCH Military-Grade Toggle Switches. TL Series. Datasheet
MICRO SWITCH -Grade Toggle Switches TL Series Datasheet MICRO SWITCH TL Series Toggle Switches Honeywell MICRO SWITCH TL Series toggle switches are military qualified to MIL-DTL-3950, specifications for
More informationLevel-Lance Model 5400A
Sales Manual Section 100 PRODUCT SPECIFICATION 5400A GENERAL DESCRIPTION The ROBERTSHAW Level-Lance Model 5400A is a microprocessor based, multi-point On-Off capacitance type level detection system. Utilizing
More informationMagnetic Style Safety Interlock Switches
Non-contact safety interlock switches are the best choice for washdown applications; the switch components are sealed and rated NEMA 4X, IEC IP67 Tolerant of dirt buildup, sensing distance, and alignment
More information78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
More informationZLS Series Global Limit Switches
GENERAL INFORMATION ZLS series limit switches are specifically designed for worldwide applications and is supported by Honeywell global resources for sales and after sales service. ZLS series limit switches
More informationSENSORS INCLINOMETERS... SN4 LENGTH AND ANGLE SENSORS... SN6 SLIP-IN SPOOL POSITION TRANSDUCER... SN8 PROXIMITY SENSOR... SN10 MATERIAL SENSOR...
Section / Description page INCLINOMETERS... SN4 LENGTH AND ANGLE SENSORS... SN6 SLIP-IN SPOOL POSITION TRANSDUCER... SN8 PROXIMITY SENSOR... SN10 MATERIAL SENSOR... SN11 ACCESSORIES... SN12 Page SN1 Page
More informationUNT1100 Series. Binary Output Jumpers AO2 AO1 AO3 AO4 AOCM AOCM AOCM AOCM AO1. AI Switches Job Information N2 Address. Ref N2+ N2- ADDR 0 = ALL OPEN
1 2 8 4 AI6 R R Installation Bulletin UNT1100 Issue Date 0309 UNT1100 Series Introduction The Unitary (UNT) controller (UNT1100 Series) is a digital controller with applications for air handling units,
More informationFOX. Rotary limit switch OPTIONS FEATURES CERTIFICATIONS
Rotary limit switch FOX Rotary limit switch used to control and measure the movement of industrial machines by measuring the rotation angle and/or counting the number of revolutions of a shaft. Fox is
More informationCJ series Ergonomic multifunction joysticks
an APEM Group Company CJ series The CJ Series joystick features an ergonomic multifunction handle purposely designed for safety critical hand-operated applications. Available as a one or two axes joystick,
More informationFG series FIXED GRIP hand controllers
an APEM Group Company FG series The FG Series of FIXED GRIP hand controllers provide rugged, yet ergonomic operation for the most demanding applications. Custom configured to order, the FG Series may be
More informationDevices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
More informationbidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
More informationCS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
More informationIntroduction Circuit Protection
Introduction Circuit Protection Weidmuller s DIN-rail mounted circuit breakers are available for use in applications where circuit protection must be able to distinguish between circuit overloads and short
More information[.050 (1.27mm) Density. D-Microminiature]
Commercial [.050 (1.27mm) Density Solder Introduction Cup/Wire D-Microminiature] Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
More informationMICRO SWITCH Military-Grade Toggle Switches TL Series Issue 4. Datasheet FEATURES POTENTIAL APPLICATIONS DESCRIPTION DIFFERENTIATION PORTFOLIO
MICRO SWITCH -Grade Toggle Switches TL Series 00530 Issue Datasheet FEATURES MIL-DTL-3950 qualified 1-, -, and -pole options - and 3-position, maintained and momentary Wide temperature range: -65 C to
More informationBulletin 871D Cylinder Position Inductive Style
Bulletin 871D Cylinder Position Inductive Style Description Bulletin 871D cylinder position inductive proximity sensors are self-contained solid state devices. These devices are designed for sensing metal
More informationConveyor Belt Alignment Switches from IDEM
Conveyor Belt Alignment Switches from IDEM Data Sheet Die-Cast Models Python Line Series Stainless Steel Models Using Conveyor Belt Alignment Switches Application: Conveyor Belt Alignment switches are
More informationDisplays Transducers. Displays and transducers
JJ Displays JJ Transducers Displays and transducers DS_Displays_and_transducers 06/2016 225 Displays and transducers Our electronic devices for flow and volume measurement are suitable for all SIKA flow
More informationFunctional data Position indication reflective visual indicator (snap on) Communicative control Cloud: (call for clientapi )
Technical data sheet AKRB24 IP Cloud capable and communicating valve actuator for adjusting flow in commercial HVAC applications. Failsafe Power Supply AC/DC 24 V Used for CCV and LGCCV assemblies. Ethernet
More informationOutput Operating Switch Schmitt Trigger Combination Voltage & Locating Lug 291 V F 832 A B A Rev. D
Precision, Long-life 12mm Optical Encoder Available with 4, 6, 8, 24,32, 64 Pulses per Revolution Optional Momentary Switch Multiple options for terminations, resolution, cable lengths, and operating voltage
More informationPANELITE ENCLOSURE LIGHTS OVERVIEW
SPEC-00581 H763.422.2211 763.422.2600 ELECTRICAL LIGHTING PACKAGES ELECTRICAL LIGHTING PACKAGES PANELITE ENCLOSURE LIGHTS OVERVIEW FEATURES Slim profile allows light to be tucked up out of the way for
More informationData Sheet. JS6000 Joystick Base
Data Sheet JS6000 Joystick Base Mobile Machine Management The JS6000 joystick base is an element of the flexible, powerful, expandable, and affordable joystick family of mobile machine management products.
More information22mm Non Illuminated Metal Operators
22mm 22mm Non Illuminated Metal Operators Altech Corp. can provide other push button and actuator options. If your requirement calls for a 22 mm operator which is not shown, please do not hesitate to call.
More informationC&K S2 Series Subminiature Thumbwheel Switches
Features/Benefits Front & rear mounting options available Variety of function codes Spacers available to fit most panel cutouts Typical Applications Test & measurement equipment Instrumentation Computer
More informationBASE. Rotary limit switch OPTIONS FEATURES CERTIFICATIONS
Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEATURES It consists of a gear
More informationPERCENT OF RATED CURRENT
A-D Series Time Delay Values PERCENT OF RATED CURRENT NOTES: UL489 C-Series Breakers available with Delay Curves 11, 12, 14, 16, 21, 22, 24, 26, 42, 44, 46. Delay Curves 11,12,14,16,21,22,24,26,42,44,46,52,54,56:
More informationRT02 Series Robust Industrial Joystick. RunnTech
Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick RT0 Series Robust Industrial Joystick Product Features Potentiometer sensor or Hall sensor; Single axis, dual axis or axis control; Resistant
More informationHG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
More informationThe OHMIC RESISTORS Pty. Ltd.
The OHMIC RESISTORS Pty. Ltd. The operating mechanism is arranged between and above two steel end plates held apart by three mild steel spacing rods. The handle mechanism is mounted above the top plate.
More informationD-Series. Circuit Breaker
D-Series Circuit Breaker Designed for snap-on-back panel rail mounting on either a 35mm x 7.5mm, or a 35mm x 15mm Symmetrical Din Rail, allowing rapid and simple mounting and removal of the breaker. It
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationStandard Options. Model 4100 Position Indicating Meter. Three Phase Motor Control. Positran Transmitter
Standard Options Model 4100 Position Indicating Meter A percent-of-full-travel meter is supplied with a trim potentiometer resistor, terminal block and connectors. A potentiometer is required in the actuator
More informationMICRO SWITCH Snap-in Panel Mount Basic Switches. DM DP Series. Datasheet
MICRO SWITCH Snap-in Panel Mount Basic Switches DM DP Series Datasheet MICRO SWITCH DM DP Series Snap-in Panel Mount Basic Switches MICRO SWITCH DM/DP basic switches are designed for a variety of applications,
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
More informationK1F006ALH cam switch - 6-pole A - screw mounting
Characteristics cam switch - 6-pole - 45-12 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting
More informationK1B004TLH cam switch - 1 pole A - screw mounting
Characteristics cam switch - 1 pole - 30-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing mode Cam
More information52 x 72 x 30 (2.05 x 2.83 x 1.18) N/C + N/O; N/C + N/C N/C + N/O N/C + N/O; N/C + N/C
Selection Guide Osiswitch Classic Design Classic Catalog number XCKM XCKL XCKJ Enclosure Metal Fixed or plug-in body, -4 C (-4 F) Features 3 conduit entries or +2 C (+248 F) versions Modularity Head +
More information802B Compact, Precision and Small Precision
02B Compact, Precision and Small Precision Compact Precision Small Precision Description Bulletin 02B consists of different body styles: compact, precision and small precision. Each style has been designed
More information120 VAC 18x16x8 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fans and Solid State Fan Controllers Model: NB FS
120 VAC 18x16x8 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fans and Solid State Fan Controllers Model: NB181608-10FS Applications and Features Features: Molded Fiberglass Reinforced Polyester
More informationK1F003MCH cam ammeter switch - 3 circuits A - for Ø 22 mm
Product data sheet Characteristics cam ammeter switch - 3 circuits - 90-12 A - for Ø 22 mm Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal
More informationGeneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays
eneral Purpose Relays R2N/R4N Miniature Power Plug-in Relays The Relpol R2N and R4N eneral Purpose Miniature Power Relays, typically called miniature cube type in the industry, offer high reliability and
More informationAvailable with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING FAILSAFE MODULATING. Overview
Feature rich J+J multi-voltage smart electric actuator with LED status light and function conversion kits. J3C-S20 Overview The J3C-S20 multi-voltage smart electric valve actuator from the European electric
More informationPHASETRONICS. SCR Power Control Specialists. EP1 Series Power Control Single Phase SCR Amps OPERATION & SERVICE MANUAL
PHASETRONICS Specialists EP1 Series Power Control Single Phase SCR 10-50 Amps OPERATION & SERVICE MANUAL Phasetronics, Inc. P.O. Box 5988 1600 Sunshine Drive Clearwater, FL 33765 (727)573-1900 FAX(727)573-1803
More informationK1C024B body for BCD encoded output switch - 1 pole A - for Ø 22 mm
Characteristics body for BCD encoded output switch - 1 pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Sub-assembly
More informationK1D012ULH cam changeover switch - 2-pole A - screw mounting
Characteristics cam changeover switch - 2-pole - 90-12 A - screw mounting Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting Fixing
More informationK1D011B body for BCD encoded output switch - 1 pole A - for Ø 22 mm
Characteristics body for BCD encoded output switch - 1 pole - 30-12 A - for Ø 22 mm Complementary Main Number of decimal 11 Switching angle 30 Range of product Product or component type Component name
More informationYour Global Flow Control Partner. Series 50 Valve Status Monitor Operation and Maintenance Manual
Your Global Flow Control Partner Series 50 Valve Status Monitor Table of Contents 1. Definition of Terms... 2 2. Safety... 2 3. Storage... 3 4. Commissioning... 3 4.1. Mounting your VSM... 3 4.2. Wiring
More informationPile Driver Weld Immune Sensors
DC... 190 8, 12, 18, and 30 mm Diameter... 190 3- and 4-Wire DC... 192 8, 12, 18, and 30 mm Diameter... 192 AC/DC... 194 12, 18, and 30 mm Diameter... 194 Pile Driver Sensors P+F s weld immune Pile Driver
More informationSelector Switch Type 04
Selector Switch Type 0 Very robust and versatile positions multi wafer selector switch 5,000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing
More informationPosition switches FD series
Position switches FD series Selection diagram 01 08 10 11 18 19 0 04 05 Ø 8 mm Ø 1,7 mm external rubber stainless steel stainless steel glass fibre rod gasket sphere sphere 31 51 5 57 35 56 41 4 adjustable
More informationMRC 7000 Proven Recording Reliability that Became the Industry Standard!
Data Sheet Recorder//Profiler DESCRIPTION The MRC7000 Recorder/ is a microprocessor based circular chart instrument capable of measuring, displaying, recording and controlling up to two process variables
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More information29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
More informationFor hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T
For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T Presentation XCR With head for rotary movement operators, spring return to off position (1 contact
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationSelector Switch Type 04
Selector Switch Type 0 Very robust and versatile positions multi wafer selector switch 5,000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing
More informationMagnetically Actuated Safety Interlock Switches
Conforms to EN10, EN292, EN020-1 CSA and BG approved Actual Size Magnetically Actuated Safety Interlock Switches Large selection choose from a large selection of contact configurations housed in plastic,
More informationProducts :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Miniature Hydraulic/Magnetic Circuit Breaker M-Series M-Series PDF elibrary The M-Series miniature hydraulic/magnetic circuit breakers
More informationSELECTOR SWITCH TYPE 01
DT SHEET SELECTOR SWITCH TYPE 0 MIN FETURES COMPCT, UP TO POSITIONS '000 switching cycles with up to Ncm switching torque Gold plated contacts: micron Robust metal bushing and shaft Operating temperature:
More informationCompact plugs and receptacles standard or high temperature rated
PN Features and Ratings p. 118 PN20 p. 119 PN20 High Temp p. 121 Spare parts p. 123 Dimensions p. 125 Compact plugs and receptacles standard or high temperature rated PN Series plugs and receptacles offer
More informationSTAC5 Stepper Drives. A high performance, compact and cost-effective stepper drive with advanced features and control options
STAC5 Stepper Drives A high performance, compact and cost-effective stepper drive with advanced features and control options Ethernet & EtherNet/IP Advanced Current Control Anti-Resonance Torque Ripple
More informationLimit Switches E47 Precision Switches
June 09 E7 Precision Switches PG.0C.0.T.E 1 E7 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................
More informationK1D004ACH cam switch - 4-pole A - for Ø 22 mm
Characteristics cam switch - 4-pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing mode Cam
More informationPENDANT PUSHBUTTON STATIONS
SBP2 PENDANT PUSH STATIONS SBP2 PENDANT PUSH STATIONS THE LIGHTWEIGHT PENDANT STATION FOR HEAVYWEIGHT APPLICATIONS COMPLETE PENDANT STATIONS 2, 4, 6, 8, 10, or 12 button configurations 1, 2, or 3 speed
More informationMS series Mid-size Hall effect joysticks
Distinctive features and specifications Compact size 1, 2 and 3 axis configurations Sealed up to IP68 Available with USB Redundant outputs available 1 million life cycles Available with J1939 CANbus and
More information920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
More informationSi 2035 Programmable Stepper Drive
Si 23 Programmable Stepper Drive Description The Si23 is a programmable stepper drive/ indexer packaged in a rugged steel case. Integral heat sink, mounting brackets, switch covers and connectors are included
More information