Selector Switch Type 04
|
|
- Janel King
- 6 years ago
- Views:
Transcription
1 Selector Switch Type 0 Very robust and versatile positions multi wafer selector switch 5,000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing Operating temperature range: -0 to +85 C Various options and customization Standard Product Variety Soldering eyelets or pins for PCB From x to 6 x poles/positions per wafer Up to 8 wafers 5 or 0 indexing angle Shorting or non-shorting.5, 8.0, 5 or 0 Ncm switching torque IP60 or IP68 front panel sealing Configurable end stops Shaft diameter: 6 mm or ¼" Examples of Customization Possible Customization Shaft dimensions and shape Bushing dimensions Switching torque Hollow shaft, inner shaft Others Typical Applications Industrial controls Avionics, instrumentation, test systems Medical and audio equipment Examples of Customization High-end audio solution with gold plated housing and PCB Momentary function to left and right side with center rest Dual concentric switch arrangement with two 0s 7 Rotary Switches
2 Selector Switch Type 0 Preference Types Selection Chart Indexing Angle 5, Shorting Contact Arrangement Construction Indexing Angle 0, Contact Arrangement Non-Shorting Construction Poles x Positions With Solder Eyelets With Pins for PCB x, x, x, x, x x x x x x 6 x 8 x x7 6x7 9x7 x 7 x5 8x5 x 5 6 x 5 6x x 8 x x Poles x Positions With Solder Eyelets With Pins for PCB x, x, x, x, x x x x x6 x6 6x6 8x6 x 6x 9x x x 8x x 6 x 6x x 8 x x Packaging Unit Order Number 0 pcs. 00 pcs. 0 pcs Stop Screws and Bushing Nut Configurable stop screws can be set on any position between and the maximum. Stop screws have to be ordered separately. For other types/options, see type key. Stop screw M. Stop screw M. Bushing nut Rotary Switches 8
3 Selector Switch Type 0 Specifications Mechanical Data Resolution:... positions max. (5 indexing); shorting positions max. (0 indexing); non-shorting Switching torque (new condition):...5, 8.0, 5 or 0 Ncm (+/- 5%), additional wafers may increase switching torque Rotational life:...5,000 switching cycles min. Fastening torque of nut:...00 Ncm max. Electrical Data Function:...From x to 6 x poles/positions per wafer (max. 8 wafers; >8 wafers are available on request) Switching mode:...shorting (for 5 indexing) Non-shorting (for 0 indexing) Load current:... A max. (resistive load) Switching voltage:... VDC max. Contact resistance (new condition):...0 mohms max. Insulation resistance:...0 Ohms min. (contact to contact/housing) Switching capacitance:... pf max. (contact to contact) Dielectric withstanding voltage: VDC during 60 seconds Material Data Shaft:...Stainless steel Bushing/housing:...Zinc diecast, zinc plated and passivated Nut:...Brass, zinc plated and passivated Contact plating:...auco (hard gold); µm Insulation material:...wafer: HF ceramic, rotor: Polybutylene (PBTB) Soldering leads:...alloy copper, AuCo plated (hard gold) Environmental Data Operating/storage temperature range:...-0 to +85 C IP sealing:...ip60, optional IP68 ( bar, hour) shaft/front panel sealing Vibration:...0 Grms 0 to 000 Hz Flammability:...UL9-HB Packaging Sizes Tray:...0 pcs. Soldering Conditions Hand soldering:...0 C max. during s max. Wave soldering:...80 C max. peak temperature during 5 s max. Switching Modes Non-Shorting (break before make) Contact bridge Contact bridge Contact bridge Contact Contact Contact Contact Contact Contact Shorting (make before break) Contact bridge Contact bridge Contact bridge Contact Contact Contact Contact Contact Contact 9 Rotary Switches
4 Selector Switch Type 0 Drawings With Solder Eyelets SW Schlüsselweite SW = key spanner M0 x 0,75,5 SW 9, 7,5,7 ø,6 Front panel cut out ø6 6,7,5,5 9,5 AL = 5,5,8 5, 5 0, 7,5 With Pins for PCB Mounting Drilling diagram 5 for indexing angle Drilling diagram 0 for indexing angle,5,5 x,, Locating Verdrehschutz lug Ansicht des Bohrplanes View from von the der Schalterachse shaft end her x x6 0, A x x 5,5 5 x x7 x7 x x x0 0,5 5 B B B 5B B 6B 6A 5A A x A A A x90 5 5B6B7B B 8B B 9B B 0B B B B A A A 0A A 9A A 8A A 7A 6A5A 5 5 C C CC 7B 5C 6B 6C 5B B C 7C B B A A B B A A A 7A 6A5A 0 5 C C B C B C B A B A A A 5 C C D D C D B A B A B A 5 x5 5C D C D C D C D C C D 5D B 5B A A B A B A B A B 5A 0 x90 5 6x 6x60 E E E D F F D D E F D C F C A C B A A C A B BB 0 5 6x 6x60 E E D F D F C A C A B B 5 = ø,mm = ø,mm Switch with Momentary Contact Examples Detent position Momentary contact Dimensions *7.5 mm extra per wafer Rotary Switches 50
5 Selector Switch Type 0 Hollow Shaft System Hollow Shaft Available for switches up to 5 wafers; inner shaft (Ø mm) to be ordered separately. Inner Shaft For switches with mounting plate or hollow shaft, inner shafts must be ordered separately. Please state exact length. Switches with Drive Shafts Consisting of a hollow outer plus and inner shaft. The inner shaft driving a maximum of wafers with 6 wipers each. Please give type description of each switch. Spacers Spacers can be used in many cases in place of shortened bushes; made of glass-fibre reinforced plastic to compensate the front panel thickness; available in two standard lengths. Length L Packaging Unit Order Number.5 mm 0 pcs. -.5 mm 00 pcs mm 0 pcs mm 00 pcs Rotary Switches
6 Selector Switch Type 0 Type Key 0 - X X X X - X X X X X X X X Wafer Type - HF ceramic P - PCB Shaft Diameter 0-6 mm Z - ¼" Number of Wafers Number of Poles per Wafer Factory set character Switching Mode - Shorting - Non-shorting Torque - 5 Ncm M Ncm N Ncm R -.5 Ncm Factory Set End Stop 00 - Standard - pos. - pos. - pos. 0-0 pos. 9-9 pos. 8-8 pos. 7-7 pos. 6-6 pos. 5-5 pos. - pos. - pos. - pos. - pos. 0-0 pos pos pos pos pos pos. 0 - pos. 0 - pos. 0 - pos. Shaft Length (AL) mm xxx - Custom (e.g. 8.5 mm = 85) Customized Shaft Length Please state shaft length (AL) measured from mounting face (max. AL = 50 mm). Pin Style, IP Sealing 00 - Eyelets 0 - Pins for PCB 0 - Eyelets, IP Pins for PCB, IP68 Rotary Switches 5
Selector Switch Type 04
Selector Switch Type 0 Very robust and versatile positions multi wafer selector switch 5,000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing
More informationSELECTOR SWITCH TYPE 01
DT SHEET SELECTOR SWITCH TYPE 0 MIN FETURES COMPCT, UP TO POSITIONS '000 switching cycles with up to Ncm switching torque Gold plated contacts: micron Robust metal bushing and shaft Operating temperature:
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
More informationData Sheet for Angle Sensors
ETS25 - R ETS25 - F Serial micro controller interface (SER) or Serial Peripheral Interface (SPI) available Versatile electrical connections on demand: Solder- or clamping terminals, flat ribbon or round
More informationOutput Operating Switch Schmitt Trigger Combination Voltage & Locating Lug 291 V F 832 A B A Rev. D
Precision, Long-life 12mm Optical Encoder Available with 4, 6, 8, 24,32, 64 Pulses per Revolution Optional Momentary Switch Multiple options for terminations, resolution, cable lengths, and operating voltage
More informationData Sheet for Panel Encoders
eries V6 With flatband cable V2 older pin s backside V5 older pin s frontside Very compact design, ideal for small installation spaces Choice of different operational torques for bearing Choice of different
More informationFiltered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
More informationRTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
More informationData Sheet for Angle Sensors
Shaft encoder for variable applications Parametrisable via DIP switches Angle 0..20 to 0..360 free configurable Sense of rotation selectable (CW / CCW) Supply voltage: 5 V / 3.3 V (switchable), 24 V Analog
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
More information9mm Size Metal Shaft Snap-in Type
Potentiometer 9mm Size Snap-in Type RK09L Series Single-unit and dual-unit types suit a variety of controls. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational angle
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More information9mm Size Metal Shaft Multi-ganged Potentiometer
9mm Size Multi-ganged Potentiometer K097/K09 Series 9.mm wide, ideal for various car audio equipment controls. otary Car Use Features Typical Specifications Items tolerance Maximum operating voltage rotational
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationMicro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationD-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
More informationSMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More informationProcess Sealed Rotaries
New Product N-0 NR0 Series Process Sealed Rotaries Subminiature Rotaries with Positive, Distinctive Detent 07-07-7 Series NR0 Subminiature Process Sealed Rotaries General Specifications Electrical apacity
More information12mm Size Insulated Shaft Type Encoder Variety
mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,
More informationDirectory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
More informationSPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
More informationCK Series...F3 16mm & 19mm High Security 3A Power Level Solder Lug Bushing Mount
Contents Keylocks Toggles A Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers CK Series... 6mm & 9mm High Security A Power Level
More informationGeneral Specifications
Series SK General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC for low & medium security; A @ 50V AC for low security Other Ratings Contact Resistance: Insulation
More information12mm Size Insulated Shaft Type Encoder Variety
mm Size Insulated Shaft Encoder Variety ECE Series Insulated shaft type with a push-on switch and other features has a wide variety of applications. Package Features A mm sized unit achieved high resolution,
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationseries Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
More informationGENERAL SPECIFICATIONS FOR S1 ~ S29
Medium Capacity Standard Size GENERL SPECIFICTIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables 800--087 Fax: 78-7-70 Other Ratings Contact Resistance: Insulation
More informationNEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT
NEW ITEM AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A - TYPE FLANGE 3 CONTACT Features: Thermoplastic Shell Industry standard PC footprints. Vertical or Horizontal PC mounting. Precision machined pin contacts.
More informationMiniature Coded Switches & Encoders
Miniature oded Switches & Encoders For Portable and Mobile pplications System Platforms ackplanes Enclosures & omponents abinets Rotary Switches Introduction Local Service Global Resources Switzerland
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS Quick Selector Chart Spring-loaded connectors and Pad connectors TEL +1 32 21 0 00 2 mm 2.5 mm 3 35, 36 35, 36 Surface mount perpendicular with positioning
More informationSN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
More informationEN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationAmphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
More informationSwitches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More informationMechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
More informationERNIPRESS Trapezoidal-Connectors Series TMC
ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized
More informationPC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationExtensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years. MIL-DTL audio connectors
Extensive range of QPL standard and custom audio connectors trusted by our fighting forces for 35 years MIL-DTL-55116 audio connectors MIL-DTL-55116 solutions Eaton s MIL--DTL--55116 connectors and cable
More informationv1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationContents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC
Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,
More informationTerminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
More information1776/1976 Series. NOTE: 1300 Series pushwheel switch discontinued, 1400 series is suggested replacement.
EECO's 1400 series switches feature snap-in front mounting in a large, easy to use package size. These switches snap together, allowing the user to create multiswitch assemblies quickly and easily without
More informationSwitches Model SW 96
Switches Model SW 96 Page 1 of 13 Features Circular design Very small dimensions, Ø2.54 mm/[0.1 ] SW 96 with flanges Different plastic colors available Contents 1. History Revision 3 2. Mechanical Specifications
More informationC&K S2 Series Subminiature Thumbwheel Switches
Features/Benefits Front & rear mounting options available Variety of function codes Spacers available to fit most panel cutouts Typical Applications Test & measurement equipment Instrumentation Computer
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationSelection guide - Section B1 «I» range
Selection guide - Section «I» range Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1 NPN 1 1 Maximum current 5A 28VDC
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationDevices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
More informationElma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
More informationD-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven
More informationMRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
More informationApplications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More informationInterface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationClassic Collet Knobs. Standard Product Variety. Introduction. Possible Customization
Precise quality knobs Secure collet mounting Wide variety Lots of accessories Custom colors on request Standard Product Variety to mm knob size Shaft diameter: mm to ¼" Glossy or matt surface or gray knob
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More informationMedium Capacity Standard Size Toggles Series S
GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationAC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS
AC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS The AC series, A type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers (OEM) needs in mind.
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationCompactPCI PowerConnector
CompactPCI PowerConnector Table of Contents 1 Introduction............................................................. 2 Product Features......................................................... 3 Performance
More information1776/1976 SERIES THUMBWHEEL SWITCHES
1776/1976 SERIES THUMBWHEEL SWITCHES EECO s 1776 and 1976 Series thumbwheel switches are the standards of the industry. Both Series offer 8, 10, 12 or 16 position binary or decimal output codes for every
More informationHan-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
More informationMicroswitches MS Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
More informationSeries PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
More informationGeneral Specifications
Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical
More informationMini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
More informationdecoupled connectors RF Coax Connectors Product Facts
Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount
More informationHMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm
Edition 12/2014 HMI Components 95 Series Characteristics The Series 95 PCB pushbuttons can be used in combination with 1.5 to 2.5 mm PCBs. The buttons are selfattaching until they are soldered. Depending
More informationK1D004ACH cam switch - 4-pole A - for Ø 22 mm
Characteristics cam switch - 4-pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing mode Cam
More informationED-21 Analog Output Series Magnetic Encoder
Analog voltage or current output Low profile IP52 sealing Ball bearing Custom housings, shafts, connectors available, in most cases with no additional tooling required DESCRIPTION The ED-21 series magnetic
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationConnector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 04520, DB 04555 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Geometry minimizes inductance Wide range of capacitance values High feed-through currents APPLICATIONS Filtering
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
More informationCONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
More informationSealed snap-action pushbutton switches bushing Ø 12 mm momentary
SW-IM-709 DISTINCTIVE FEATURES Snap-action : tactile feedback with audible click High current/voltage rating Sealed to IP67 Flat round actuator for optional marking NO+NC ENVIRONMENTAL SPECIFICATIONS Front
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: 5A @ 25/250V AC or 5A @ 30V DC Other Ratings Contact Resistance: 0 milliohms
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
More informationTechnical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
More informationNOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
More informationVMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
More informationK1F037MCH cam voltmeter switch - 3L and 3L-N A - for Ø 22 mm
Characteristics cam voltmeter switch - 3L and 3L-N - 60-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing
More informationTNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
More informationM23 Connectors and cables
Contents Product Description: SAI M23 Connectors.2 Contact assignment.7 Technical data.8 Overview.10 M23 connector for signal transmission.12 M23 connector for power transmission.18 Moulded M23 cables.22
More informationseries Miniature snap-action switches
Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Rocker switches Product features Friction contact
More information