FL2000 System. Table of Contents. 4/ FL2000 System

Transcription

1 FL000 Products

2 FL000 System Table of Contents Introduction... Applications...-6 Wall Mount Boxes - Empty...7 Wall Mount Boxes - Accessories...8 Rack or Cabinet Mount Panels - Empty Termination Panel...9 Splice Panel...0 Termination/Splice Panel... Value-Added Module Chassis... Rack or Cabinet Mount Panels - Preconfigured Termination Panel with Multifiber Cable Termination Panel with Pigtails...5 Termination/Splice Panel with Pigtails...6 Slack Storage Solutions Fiber Storage Disk...7 Fiber Storage Tray...7 Storage Deck Panel...8 Horizontal Interbay Management Panel...8 6pak Adapter Plug-Ins Loaded with adapters only...9 Loaded with adapters and pigtails...0 Accessories Locks... End Guards... Interbay Management Panel... Lower Cable Troughs... Bonding/Grounding Kit... Cable/Clamp Kit... Blank VCG... FL000 Fiber Frame Network Rack... Inner Interbay Management Panel... Mounting Options Patch Cords...8 FasTerm Kit...9 Connector and Adapter Cleaning Kit...3 Index...3

3 FL000 System Introduction FL000 Rack Mount Termination Panel (Empty) Single Fiber Access Swing-out Bulkhead Allows Full Access The FL000 System is a flexible, modular and economical series of fiber products for today s and tomorrow s evolving communications and data networks. Features A complete line of modular panels and boxes, developed for cabinet, rack and wall mounting. Fully adaptable for large or small main distribution frame (MDF), intermediate distribution frame (IDF) or telephone closet (TC) applications. Designed for 9" (48.6 cm) EIA rack or cabinet environment found in many enterprise networks; optional brackets are available to accommodate 3" (58.4 cm) or ETSI rack or cabinet mounting. Provides termination, splicing and storage capabilities for in-building cables, outside plant cables and fiber optic terminal (FOT) equipment patch cords. Modular design offers maximum flexibility to satisfy both current needs and future growth requirements. A full line of options and accessories ensures compatibility with existing optical equipment. FL000 systems accommodate the Value-Added plug-in modules, adding flexibility and functionality to the optical transport systems. Splitters, wavelength division multiplexers (WDMs) and other optical components can be easily incorporated. All FL000 panels and boxes accommodate the modular FL000 6pak plug-ins. 6paks are available in all connector styles and can be ordered as needed. ADC s patented removable angled retainers allow easy access for single fiber maintenance. FL000 panels and boxes feature superior vertical cable protection and management. Rack mount panels are hinged on one side, allowing full access to the rear of the front plate and the interior of the panel. Rack mount panels are equipped with mounting brackets to provide 5" (.7 cm) recess mounting; mounting brackets are available for virtually any mounting application. Rack mount panels can be wall mounted. The new FL000 splice wheel allows easy roll-up of pigtail and buffer tube lengths and superior bend radius protection. The FL000 splice deck is available to complete existing installations. FL000 Rack Mount Termination Panel with IFC FL000 Rack Mount Termination/Splice Panel (Empty) 6pak Adapter Plug-Ins

4 FL000 System Applications Interconnect Configuration In an interconnect network, all outside plant (OSP) fibers are terminated at the back of the connector module and all equipment patch cords are connected at the front. Interconnect installations are most commonly found in small, price-sensitive and low-reconfiguration applications. OUTSIDE PLANT CABLE(S) TO OSP OUTSIDE PLANT CABLE(S) EQUIPMENT PATCH CORDS Cross-Connect Configuration OUTSIDE PLANT CABLE(S) Interconnect Configuration TO FIBER OPTIC TERMINAL EQUIPMENT EQUIPMENT PATCH CORDS In a cross-connect network, all OSP fibers and equipment terminations are terminated on the back of the connector module. Patch cords are used at the front of the connector module to cross-connect OSP fiber to the FOT equipment. The convenience and flexibility of the cross-connect system make it an attractive method for managing your fiber plant. Cross-connect is the preferred installation for maximum flexibility, simplified growth and cutovers, and protection of permanent connections. EQUIPMENT PATCH CORDS TO FIBER OPTIC TRANSMISSION EQUIPMENT OSP FROM OSP OSP CABLE EQUIPMENT PATCH CORDS TO EQUIPMENT CROSS-CONNECT PATCH CORDS CROSS-CONNECT PATCH CORDS Cross-Connect Configuration

5 FL000 System Applications Independent Service Provider Fiber Application Fiber termination bays or fiber panels provide a central point for terminating incoming fibers. Fiber jumpers, routed through a FiberGuide protection system, connect the fiber termination bay to the electronic equipment for optical to electronic conversion. FiberGuide Fiber Cable Management System Copper Cabling OUTSIDE PLANT (OSP) FIBER Fiber Optic Patch Cord SPLICE ENCLOSURE FIBER TERMINATION/ STORAGE BAY ELECTRICAL/OPTICAL EQUIPMENT BAY 3

6 FL000 System Applications CATV Video Signal Path Through ADC Fiber Panel Products FiberGuide Fiber Cable Management System 3 Tx 4 FL000 VAM Panels 3 4 Equipment Rack or Cabinet Transmit Path Video signal via coaxial cable from video modulators. ADC Homeworx transmit panel converts coax electrical video signal to optical signal on fiber. Transmitter sends optical signal out. Optical signal sent to the splitters via a fiber optic patch cord or pigtail. Splitters installed in FL000 Value-Added Module (VAM). Splitter receives optical signal from transmitter and splits signal into several out paths (x, x3, etc.). Each out path serves one node. 3 Rx FL000 Frame Interbay Management Panel CATV VIDEO SIGNAL PATH Optical video signal from outputs of splitters routed to the FL000 termination connector module via fiber patch cord. Intrafacility fiber cable (IFC) clamped and connected to rear of fiber patch panel. IFC clamped to Fiber Entrance Cabinet (FEC). IFC fibers spliced to outside plant (OSP) fibers on FEC splice drawer. OSP cable clamped to FEC. 6 FL000 Fiber Termination Panel 7 End Guard 3 Fiber Entrance Cabinet Intrafacility Fiber Cable 8 Return Path 9 Outside Plant Cable Video signal from each node is jumpered from FL000 termination panel to VAM chassis. 6pak bulkhead on VAM connects fiber OSP patch cord to patch cord from upstream receiver. Fiber patch cord from VAM connects upstream signal to ADC Homeworx receive panel. The receive panel converts optical video signal to electrical and sends to network/ set-top control system via coaxial cable. 4

7 FL000 System End User Fiber Application Main Distribution Frame FIBER BACKBONE (RISER) CABLE COPPER BACKBONE (RISER) CABLE IDF TC WORK AREA IDF WORK AREA ENTRANCE FACILITY IDF MDF TC PBX WORK AREA FIBER MDF (MC) AREA COPPER MDF (MC) AREA TO (FROM) PBX The main distribution frame (MDF) area is generally the central point of interconnection between outside plant (OSP) entrance cables and the in-building cabling distribution system. The MDF area is often used as the point of demarcation between the local exchange carrier and the customer premises equipment. Intermediate Distribution Frame IDF IDF TC WORK AREA WORK AREA DATA GRADE MODULAR PATCH CORDS FIBER OPTIC PATCH CORDS MPP MPP HUB FIBER PANEL VIDEO DISTRIBUTION HORIZONTAL WIRING FIBER TIE CABLES COAX TIE CABLES COPPER TIE CABLES TO WORK AREA TO TC TO TC TO TC ENTRANCE FACILITY IDF MDF TC PBX WORK AREA FIBER BACKBONE COPPER AND COAX BACKBONES The intermediate distribution frame (IDF) area is the point of interconnection between building backbone cables and horizontal tie cable serving telephone closets or station wire serving the individual work locations. IDFs usually serve a single floor and are typically arranged vertically in a building riser area. Electronic hub equipment is normally installed within the IDF area because of the proximity to the backbone cabling. In many cases, the IDF is the last connection point prior to the end workstation connection. In large buildings, IDFs may serve multiple telephone closets (TCs) via tie cables. 5

8 FL000 System Applications Telephone Closet FIBER TIE CABLES COPPER TIE CABLES ENTRANCE FACILITY IDF IDF IDF MDF TC TC PBX WORK AREA WORK AREA WORK AREA COAX TIE CABLES HORIZONTAL WIRING INCH FIBERGUIDE FIBER CABLE MANAGEMENT SYSTEM FIBER WALL MOUNT BOX 0 AWI 300s FOR COPPER TERMINATIONS Video Distribution The telephone closet (TC) is the point of interconnection between building cabling and horizontal station wire serving the individual work locations. TCs usually serve a specific zone on a floor. Multiple TCs may be served from single IDFs. The TC generally is the last connection point prior to the end workstation and may not include electronic equipment. 6

9 Wall Mount Boxes Empty Features Terminate or 4 fibers Constructed of economical, high strength polycarbonate Accommodate FL000 6paks Expansion kits available to convert fiber boxes to 4 fiber boxes Fiber Panel Data Fiber Capacity: or 4 Termination Splice Pigtail Storage Wall Mount FL-WBOX FL-GIDE Order the box and the 6paks separately for field assembly: STEP. Order empty or 4 fiber wall boxes based on the number of connectors/adapters required. - FL-WBOX ( fiber capacity wall mount box) - FL-4WBOX (4 fiber capacity wall mount box) STEP. Order the required number of 6pak adapter plug-ins to be placed in the wall box (see ordering information on pages 9-0). STEP 3. Order splice kits as needed (see ordering information on page 8). STEP 4. Order vertical cable guides for added fiber management and protection. The guides can be installed on the right side of the wall box to cover and protect the connector assembly. Dimensions (HxWxD) FL-4WBOX FL-4GIDE Wall Mount Boxes fiber capacity 4 fiber capacity Vertical Cable Guides For fiber wall box For 4 fiber wall box 3.0" x.5" x 5.0" (33.0 x 9. x.7 cm) 3.0" x.5" x 8.5" (33.0 x 9. x.59 cm) 3.0" x 5.0" x 5.0" (33.0 x.7 x.7 cm) 3.0" x 5.0" x 8.5" (33.0 x.7 x.59 cm) FL-WBOX FL-4WBOX FL-GIDE FL-4GIDE 7

10 Wall Mount Boxes Accessories 6pak adapter plates, please see pages 9-0 Blank 6pak plates Fill unused positions FL-6PBLNK Hubbel connector kit; includes one secure plate, one Hubbel connector and one rubber grommet for unused position FL-ACC00 Hubbel connector, individual Locks for wall mount boxes Wall mount lock kit #; includes internal mounting brackets, lock and key # Wall mount lock kit #; includes internal mounting brackets, lock and key # Locks for wall mount vertical cable guide Key lock #; includes lock and key # Key lock #; includes lock and key # Splicing bracket kit Adds fiber splicing to wall boxes; includes mounting bracket and one fiber mini splice tray. For additional splicing capacity (over fibers), order one additional mini splice tray FibrLok Bare fusion Heat shrink fusion Mechanical Rotary Nortel Mini splice trays Expand wall boxes from to 4 fiber splice FibrLok Bare fusion Heat shrink fusion Mechanical (Elastomeric) Rotary Nortel Rubber grommet kit (dust cover) kit of Bonding/grounding kit kit of Cable clamp kit kit of Outer diameter." to.8" Outer diameter.6" to.9" Wall box expansion ring Expands a fiber wall box to a 4 fiber capacity wall box; assembly is required Vertical cable guide expansion ring Expands a fiber vertical cable guide to a 4 fiber vertical cable guide; assembly is required FIPM-ACC-HC FL-ACC003 FL-ACC005 IPA-K IPA-K FL-WSPLCE-3M FL-WSPLCE-FT FL-WSPLCE-HS FL-WSPLCE-MT FL-WSPLCE-RT FL-WSPLCE-NT FST-M-3M FST-M-FT FST-M-HS FST-M-MT FST-M-RT FST-M-NT FL-ACC00 FL-ACC006 FL-ACC007 FL-ACC0 FL-EXPKIT FL-VCGEXP Hubbel Connector Kit Locks Mini Splice Tray Rubber Grommet Kit Bonding/Grounding Kit 8

11 Rack or Cabinet Mount Termination Panels Empty Panels Features Mounting - 9" (48.6 cm) EIA rack or cabinets, standard 5" (.7 cm) recess - Wall mounting option available - Other mounting kits available. Please see pages 3-7. Hinged on left front side ; allows full access to rear of front plate and interior of panel FL000 6pak adapter plug-ins ordered separately Constructed of high strength aluminum Equipped with removable metal doors with Plexiglas windows Designation labels included with each panel Complete line of accessories including locks for security Fiber Panel Data Fiber Capacity*:, 4, 36, 48, 7 & 96 Termination Pigtail Storage *Panels can double capacity with LX.5 or LC adapters Rack or Cabinet Mount Termination Panel Includes vertical cable management trough fiber capacity 4 fiber capacity 36 fiber capacity 48 fiber capacity 7 fiber capacity 96 fiber capacity Accessories Wall mount bracket - Needed for fiber capacity panel only Cable clamp kit - One per cable recommended Outer diameter." to.8" Outer diameter.7" to.0" Cable clamp kit for fiber capacity panel only Bonding/grounding kit For mounting kits and additional accessories, see pages -7 Panel Height.75" (4.45 cm) 3.50" (8.89 cm) 5.5" (3.34 cm) 5.5" (3.34 cm) 8.75" (.3 cm) 0.50" (6.67 cm).75" (4.45 cm) 3.50" (8.89 cm) 5.5" (3.34 cm) 0.4" (5.76 cm) 4.95" (.58 cm) FL-RPNL FL-4RPNL FL-36RPNL FL-48RPNL FL-7RPNL FL-96RPNL FL-ACC008 FL-ACC007 FL-ACC0 FL-ACC033 FL-ACC " (.3 cm) 0.50" (0.67 cm) 9.60" (49.79 cm) 5.5" (3.34 cm) 4 Fiber Capacity 7 Fiber Capacity 96 Fiber Capacity Panels with right front hinge and VCG are also available, although they are not standard products. To order a panel with right front hinge and VCG, add "-R" after the catalog number. Example: FL-RPNL-R. 9

12 Rack or Cabinet Mount Splice Panels Empty Panels Features Offers combination of splicing protection and associated fiber/pigtail storage Splice panel can be mounted in conjunction with any FL000 termination panel or as a stand-alone splice panel Occupies same footprint and offers same mounting options as FL000 termination panels (see page 9) Accepts the new ADC splice wheel for efficient management of fiber cable and splice protection Accepts the traditional ADC splice deck 0.4" (5.76 cm) 4.95" (.58 cm) 9.60" (49.79 cm) Top Side 3.50" (8.89 cm) Fiber Panel Data Fiber Capacity: 48, 96, 44 Splice Pigtail Storage Splice Panel for Splice Wheel (Accepts splice wheel only) 48 fiber capacity 96 fiber capacity 44 fiber capacity Splice Wheel with Splice Chip Heat shrink fusion Mechanical Nortel Splice Panel for Splice Deck for existing installations (Also accepts splice wheel) 48 fiber capacity 96 fiber capacity 44 fiber capacity Splice Deck with Splice Chip for existing installations Heat shrink fusion Mechanical Bare fusion Nortel Cable Clamp Kit (kit of ) Outer diameter." to.8" Outer diameter.7" to.0" For mounting kits and additional accessories, see page -7 Splice Deck with Splice Chip Panel Height 3.5" (8.89 cm) 7" (7.78 cm) 8.75" (.3 cm) 3.5" (8.89 cm) 7" (7.78 cm) 8.75" (.3 cm) Clear Covers Bottom Side FL-48SPNL FL-96SPNL FL-44SPNL FST-DRS-HS FST-DRS-MT FST-DRS4-NT FL-48SPNL FL-96SPNL FL-44SPNL FL-RSPLCE-HS FL-RSPLCE-MT FL-RSPLCE-FT FL-RSPLCE-NT FL-ACC007 FL-ACC0 Splice Chip(s) (Heat Shrink Shown) Splice Wheel with Splice Chip Splice Deck Panels with right front hinge and VCG are also available, although they are not standard product. To order a panel with right VCG, add "-R" after the catalog number. Example: FL-48SPNL-R. 0

13 Rack or Cabinet Mount Termination/Splice Panels Empty Panels Features Mounting - 9" (48.6 cm) EIA racks or cabinets, standard 5" (.7 cm) recess - Wall mounting option available - Other mounting kits available. Please see pages 3-7 Hinged on left front side for complete access to interior of termination section Ability to quickly and easily configure, utilizing the 6pak assemblies (ordered separately) Complete line of accessories including locks for security Uses ADC splice wheels or splice decks Fiber Panel Data Termination Splice Pigtail Storage 0.4" (5.76 cm) 4.95" (.58 cm) 9.60" (49.79 cm) Termination/splice panel position 4 position 48 position 7 position 96 position Splice Wheel with Splice Chip Heat shrink fusion Mechanical Nortel Splice Deck with Splice Chip Heat shrink fusion Mechanical Bare fusion Nortel 5.5" (3.34 cm) Panel Height 3.5" (8.89 cm) 5.5" (3.34 cm) 8.75" (.3 cm) 4" (35.56 cm) 7.5" (44.45 cm) 4 Position 48 Position 96 Position FL-TS350 FL-4TS55 FL-48TS875 FL-7TS40 FL-96TS75 FST-DRS-HS FST-DRS-MT FST-DRS4-NT FL-RSPLCE-HS FL-RSPLCE-MT FL-RSPLCE-FT FL-RSPLCE-NT Panels with right front hinge and VCG are also available, although they are not standard product. To order a panel with right front hinge and VCG, add "-R" after the catalog number. Example: FL-4TS55-R.

14 Value-Added Connector Module System Empty Panels Features VAM Chassis Panel can be mounted in 5" (.7 cm) recess 9" (48.6 cm) EIA racks or cabinets, standard; other mounting kits available (please see pages 3-7). Match vertical cable management features of existing FL000 system Protect and manage optical components Available in either 9-position, 6-position, or 4-position configurations Purchased empty and can be loaded with different plug-in modules (which can be mixed and matched) or blank plates Only front facing modules can be used in the FL000 VAM system Wavelength Division Multiplexer Plug-In Module (WDM) VAM chassis accommodates WDM components, enabling service providers to double the amount of information transmitted by multiplexing two signals over a single fiber Used to achieve additional capacity when fibers of an expanded route have been exhausted Allows service providers to make better use of fiber that has been deployed as network grows and traffic patterns change Also employed to multiplex a video signal onto a voice circuit VAM chassis 4 plug-in modules 6 plug-in modules 9 plug-in modules WideVAM chassis; accommodates 4 WideVAM modules; color: Putty Panel Height (HxWxD) 5.5" x 9" x 0.4" (3.34 x 48.6 x 5.76 cm) 7" x 9" x 0.4" (7.78 x 48.6 x 5.76 cm) 0.5" x 9" x 0.4" (6.67 x 48.6 x 5.76 cm) 5.5" x 9" x 0.4" (3.34 x 48.6 x 5.76 cm) Splitter Plug-in Modules Mounted within variously-sized modules for splitting an optical input into many optical outputs Used for video and voice distribution in fiber-inthe-loop (FITL) networks Used for broadcast applications in CATV networks Monitor Plug-in Modules Eliminate the need to disconnect patch cords to test optical circuits Provide reliable, easy access Couplers mounted within the plug-in module to provide nonintrusive monitoring point for testing Each module designed to meet specific customer requirements for access and monitor capabilities Access Plug-in Modules Incorporate optical jack which allows intrusive access to the fiber 0.4" (5.76 cm) 4.95" (.58 cm) 9.60" (49.79 cm) FL-4VAM55 FL-4VAM55 FL-6VAM700 FL-9VAM05 FL-4WVAM55 5.5" (3.34 cm) Note: The FL000 VAM system is designed to accept only front access modules; i.e., all input and output adapters, pigtails and/or bare fibers must be located on the front of the plug-in modules. For plug-in module ordering information, call ADC Customer Service ( ) for a copy of the Value-Added Connector Module System catalog.

15 Rack or Cabinet Mount Termination Panels Preconfigured Panels with Multifiber Cable Features Available with factory-installed multifiber intrafacility cable (IFC) or OSP cable Panels with multifiber cable attached ship as a single unit with cable clamp installed Panels come equipped with customer specified number of adapters, retainers, connectors, cable type and cable length Panels with multifiber cable attached save costly installation time Simplifies ordering process by allowing one part number for the panel, adapters, connectors and cable Multiple mounting styles available Fiber Panel Data Termination Preloaded with Multifiber Cable Ordering information appears on opposite page. 3

16 Rack or Cabinet Mount Termination Panels Preconfigured Panels with Multifiber Cable FL Panel Type S M Nominal Capacity Singlemode Multimode Panel Height position.75" (4.45cm) (RU) 4 position 3.5" (8.89 cm) (RU) 36 position 5.5" (3.34 cm) (3RU) 48 position 5.5" (3.34 cm) (3RU) 7 position 8.75" (.3 cm) (5RU) 96 position 0.5" (6.67 cm) (6RU) Connector Style Multimode 9 SC D Duplex SC 5 ST Y LX.5 6 LC Singlemode L F 7 N J E 4 P K X 8 3 Cable Size A Z Y X W Ultra PCFC FC with zirconia adapter FC 8 angled polish Ultra PCSC SC with zirconia adapter SC 8 angled polish Duplex SC Ultra PCST ST with zirconia adapter E angled polish LX.5 LC FC Hybrid (FC connector on front; SC connector on back of bulkhead) ST Hybrid (ST connector on front; SC connector on back of bulkhead) x x 4 x 36 x 48 Latch Type U D Mounting Style A B C D E F H Standard Hole Plug Screwdriver K Lock K Lock Cable Exit Direction Up Down 9" (48.6 cm) standard (9.6" [49.78 cm] overall) 9" (48.6 cm) maximum (9" [48.6 cm] overall) 9" (48.6 cm) flush mount 3" (58.4 cm) centered 3" (58.4 cm) with oversized VCG ETSI flush mount 600 mm Length in Meters XXX Cable length (meters) Cable Type Multimode C IFC stranded 6.5/5 Singlemode A IFC stranded riser-rated F Plenum stranded G OSP single armor stranded H Indoor-outdoor stranded J OSP dielectric stranded K IFC stranded Maxi-Strip M IFC ribbon riser-rated T OSP dielectric ribbon L OSP armored ribbon LX.5 and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter. Mounting kit shipped unattached, if other than standard mounting style. Please see pages 3-7 for mounting instructions. 4

17 Rack or Cabinet Mount Termination Panels Preconfigured Panels with Pigtails Features FL000 panels can also be shipped with 6paks and/or pigtails pre-installed at the factory. Reduce installation time 0.4" (5.76 cm) 4.95" (.58 cm) 9.60" (49.79 cm) 5.5" (3.34 cm) Simplify ordering process Use this configuration guide to determine the catalog number right for your application. Panel Type R Termination only Nominal Capacity FL - Panel Height 3 position.75" (4.45 cm) (U) 4 position 3.5" (8.89 cm) (U) 36 position 5.5" (3.34 cm) (3U) 48 position 5.5" (3.34 cm) (3U) 7 position 8.75" (.3 cm) (5U) 96 position 0.5" (6.67 cm) (6U) Connector Style Multimode 9 SC D Duplex SC 5 ST Y LX.5 6 LC Singlemode L F 7 N J E 4 P K X 8 3 Ultra PCFC FC with zirconia adapter FC 8 angled polish Ultra PCSC SC with zirconia adapter SC 8 angled polish Duplex SC Ultra PCST ST with zirconia adapter E angled polish LX.5 LC FC hybrid (FC connector on front; SC connector on back of bulkhead) ST hybrid (ST connector on front; SC connector on back of bulkhead) Number of Ports Loaded Pigtail or Adapter Type A P H R K Y Latch Type Adapters only 6 fiber softwall bundle 6 fiber Maxi-Strip fiber ribbon fiber softwall bundle fiber Maxi-Strip Mounting Style 3 A B C D E F H Latch Hole plug Screwdriver K lock K lock 0 9" (48.6 cm) standard (9.6" [49.78 cm] overall) 9" (48.6 cm) maximum (9" [48.6 cm] overall) 9" (48.6 cm) flush mount 3" (58.4 cm) centered 3" (58.4 cm) with oversized VCG ETSI flush mount 600 mm LX.5 and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter. For use with LX.5 and LC. 3 Mounting kit shipped unattached, if other than standard mounting style. 5

18 Rack or Cabinet Mount Termination/Splice Panels Preconfigured Panels with Pigtails Features 0.4" (5.76 cm) 9.60" (49.79 cm) FL000 panels can also be shipped with 6paks and/or pigtails pre-installed at the factory. Reduce installation time Simplify ordering process 4.95" (.58 cm) PNT PNT 5.5" (3.34 cm) Use this configuration guide to determine the catalog number right for your application. Panel Type C Termination/Splice Nominal Capacity FL - Panel Height 3 position 3.5" (8.89 cm) (U) 4 position 5.5" (3.34 cm) (3U) 48 position 8.75" (.3 cm) (5U) 7 position 4.00" (35.56 cm) (8U) 96 position 7.50" (44.45 cm) (0U) Connector Style Multimode 9 SC D Duplex SC 5 ST Y LX.5 6 LC Singlemode L F 7 N J E 4 P K X 8 3 Ultra PCFC FC with zirconia adapter FC 8 angled polish Ultra PCSC SC with zirconia adapter SC 8 angled polish Duplex SC Ultra PCST ST with zirconia adapter E angled polish LX.5 LC FC hybrid (FC connector on front; SC connector on back of bulkhead) ST hybrid (ST connector on front; SC connector on back of bulkhead) Number of Ports Loaded Pigtail or Adapter Type A P H R K Y Splice Type 0 M W M N Adapters only 6 fiber softwall bundle 6 fiber Maxi-Strip fiber ribbon fiber softwall bundle fiber Maxi- Strip None or N/A Mechanical (wheel) Heat shrink fusion (wheel) Bare fusion (deck) Heat shrink fusion (deck) Mechanical (deck) Raychem universal (deck) Nortel (deck) Splice Type Number of Splice Decks Mechanical (wheel) Nortel (wheel) Mounting Style 3 A B C D E F H Latch Type Number of Cable Clamps Latch Hole plug Screwdriver K lock K lock clamp (standard) clamps 9" (48.6 cm) standard (9.6" [49.78 cm] overall) 9" (48.6 cm) maximum (9" [48.6 cm] overall) 9" (48.6 cm) flush mount 3" (58.4 cm) centered 3" (58.4 cm) with oversized VCG ETSI flush mount 600 mm LX.5 and LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter. For use with LX.5 and LC. 3 Mounting kit shipped unattached if other than standard mounting style. 6

19 Slack Storage Solutions Fiber Storage Disk Features Provides jumper storage for 3mm patch cords one patch cord per disk Stores 3.8 meters (.5') of patch cord in each disk Fiber Panel Data Patch Cord Storage Rack/Cabinet Mount Wall Mount Fiber Storage Disk 6 disks 4 disks Fiber Storage Tray Features Provides jumper storage for mm and 3 mm patch cords Stores 0 m per tray of 3 mm cable, 35 m per tray of mm cable, patch cord per tray Fiber Panel Data Patch Cord Storage Rack/Cabinet Mount Dimensions (HxWxD) 5.5" x 9" x 0.9" (3.34 x 48.6 x 5.8 cm) 8.75" x 9" x 0.9" (.3 x 48.6 x 5.8 cm) 0.4" (5.76 cm) 4.95" (.58 cm) 0.8 in (5.86 cm) 4.95 in (.58 cm) ROTATE TO REMOVE SLACK 9.60" (49.79 cm) FL-6FSD55 FL-8FSD in (49.79 cm) 5.5" (3.34 cm) 5.5 in (3.34 cm) Fiber Storage Tray 6 Trays Dimensions (HxWxD) 5.5" x 9" x 0.9" (3.34 x 48.6 x 5.8 cm) FL-CST6055 7

20 Slack Storage Solutions Storage Deck Panel Features Mounts with FL000 termination panels to provide jumper storage Wall, Rack, or Cabinet Mount Utilizes unique storage decks for patch cord storage Each storage deck accommodates up to 9 meters of 3 mm cable, and 39 m of mm cable, two to four cables per tray Storage deck panels (storage decks ordered separately) storage deck capacity; 3.5" x 9" x 0.9" (8.89 x 48.6 x 5.8 cm) 6 storage deck capacity; 8.75" x 9" x 0.9" (.3 x 48.6 x 5.8 cm) Storage deck Horizontal Interbay Management Panel Features FL-RSTORE FL-6RSTORE FL-TR000 Mounts horizontally in a bay to manage jumper storage May be modified for flush or wall mount applications 4.95" (.58 cm) 0.4" (5.76 cm) 4.95" (.58 cm) 9.60" (49.79 cm) Storage Deck Top View 9.60" (49.79 cm) 3.50" (8.89 cm) FL000 Storage Deck Panel Front View 5.5" (3.34 cm) Horizontal interbay management panel FL-HZSTORE 8

21 6pak Adapter Plug-Ins For all FL000 Termination Products Features Completely interchangeable between FL000 panel and wall box products Can be ordered with all standard types of simplex and duplex single and multimode adapters and connectors Feature ADC s patented removable angled retainers which provide superior fiber management No tools required to install into FL000 boxes or panels Can be ordered with adapters only, or for quick and easy installation, with pre-terminated 3 meter (9.84') or 5 meter (6.4') pigtails 6pak Plug-In (shown with singlemode simplex adapters) 6pak Plug-In (shown with mulitmode simplex adapters) 6pak Plug-In (shown with singlemode LX.5 adapters) 6pak Plug-In (shown with multimode LX.5 adapters) 6pak Plug-In (shown with singlemode duplex adapters) 6pak Plug-In (shown with multimode duplex adapters) 6pak Blank Plug-In Multimode SC ST FC SC (duplex) SC, zirconia ST, zirconia FC, zirconia LX.5 LC Singlemode SC ST FC SC (duplex) FC with 8 angled polish SC with 8 angled polish SC, zirconia ST, zirconia FC, zirconia E-000, angled polish LX.5 LC Hybrid: FC front, SC back Hybrid: ST front, SC back 6pak blank plug-in FL-6PMMSC FL-6PMMST FL-6PMMFC FL-6PMMDSC FL-6PMMSC-Z FL-6PMMST-Z FL-6PMMFC-Z FL-6PMMLX FL-6PMMLC FL-6PSMSC FL-6PSMST FL-6PSMFC FL-6PSMDSC FL-6PSMAFC FL-6PSMASC FL-6PSMSC-Z FL-6PSMST-Z FL-6PSMFC-Z FL-6PSMAE FL-6PSMALX FL-6PSMLC FL-6PSMFC/SC FL-6PSMST/SC FL-6PBLNK 9

22 6pak Connector Plug-Ins With Adapters and Pigtails Features Available with pre-terminated 3 meter (9.84') or 5 meter (6.4') pigtails Pigtails consist of a single outer jacket containing six color-coded 900 µm fibers One end of pigtail terminated to chosen connector style and installed into the 6pak plug-in adapters ADC recommends specific breakouts for panel and wall mount box products Saves installation time FL000 6pak plug-in with SC adapters and pigtails Multimode Pigtails and Adapters Multimode Connector Style 5 ST 9 SC A FC D Duplex SC Y LX.5 6 LC Fiber Size B Multimode 6.5/5 C Multimode 50/5 FL - 6P B C 6 Singlemode Pigtails and Adapters Singlemode Connector Style E 4 7 F J K X 8 3 Duplex SC Ultra PCFC Ultra PCST Ultra PCSC PCFC 8 angled polish PCSC 8 angled polish E-000 angled polish LX.5 LC FC hybrid (FC connector on front; SC connector on back of bulkhead) ST hybrid (ST connector on front; SC connector on back of bulkhead) FL - 6P S 6 Length (in meters) 3 m (9.84') pigtail 03W for wall mount boxes 5 m (6.4') pigtail 05R for rack mount panels LX.5 and LC 6paks are loaded with fiber pigtails Length (in meters) 3 m (9.84') pigtail 03W for wall mount boxes 5 m (6.4') pigtail 05R for rack mount panels Fiber Type C D Stranded Maxi-Strip Fiber Size S Singlemode LX.5 and LC 6paks are loaded with fiber pigtails 0

23 Accessories for FL000 Rack Mount Panels Clamp Bracket Rubber Grommets Cover Locks Clamp Yokes () Plate Nuts () Cable Clamp Kit Interbay Management Panel E-50-L39 7' ".5" End Guard UEGP-7PW 4" Lower Cable Trough FL-ACC0 7" Lower Cable Trough FL-ACC0 Blank VCG FL-BLNKFULL0875 Locks for rack mount panels Key lock #; includes lock and key # Key lock #; includes lock and key # End guards 7' H x.5" W x " D; right or left side; putty white Interbay management panel 7' x 5"mounts to a standard 9" or 3" rack Lower cable trough 4" H x 9" W x 5" D 7" H x 9" W x 5" D Bonding/grounding kit kit of Cable clamp kit kit of Outer diameter." to.8" Outer diameter.6" to.9" Cable clamp kit For use with fiber termination or termination/splice panels Blank VCG to add cable management to frame not fully loaded 3.5" (8.89 cm) 8.75" (.3 cm) 0.5" (6.67 cm) Blank VCG with blank panel for aesthetics 3.5" (8.89 cm) 5.5" (3.34 cm) 7.0" (7.78 cm) 8.75" (.3 cm) 0.5" (6.67 cm) Bonding/Grounding Kit IPA-K IPA-K UEGP-7PW E-50-L39 FL-ACC0 FL-ACC0 FL-ACC006 FL-ACC007 FL-ACC0 FL-ACC033 FL-BLNKVCG0350 FL-BLNKVCG0875 FL-BLNKVCG050 FL-BLNKFULL0350 FL-BLNKFULL055 FL-BLNKFULL0700 FL-BLNKFULL0875 FL-BLNKFULL050

24 FL000 Fiber Frame Features An FL000 fiber frame can be quickly and easily configured to fulfill a particular application s requirements. FL000 components are designed to allow the customer to quickly assemble a fiber frame at their location. ADC will assemble a loaded fiber frame at the customer s request " 8.3" FL- BLNKFULL050 FL-INIMP-RU 38.5" INNER-IMP () Components may include: Termination panels Splice panels Preconfigured panels with pigtails Value-added modules Storage Network Rack 7'H x 9"W (4 cm x 48. cm) 7'H x 3"W (4 cm x 58.4 cm) Features PWUEF-7X9ERN PWUEF-7ERN Contact ADC s Technical Assistance Center ( ) to configure a loaded fiber frame. Inner Interbay Management Panel The FL000 inner interbay management panel allows you to convert a 3" (58.4 cm) EIA rack to a 9" (48.6 cm) EIA mounting environment and provide slack storage. 7'.75" 4.75" PWUEF-7ERN Network Rack FL-4RPNL 4" LHCT.50" 5.88" Front View Typical Frame Application Using FL000 Frame, IMP and End Guard 8.3" (46.5 cm).3" (56.67 cm) Assemble Inner-Interbay Management Panel ( Shown) Using Rack Mount Screw Inner interbay management five spools, length: 9.75" (75.57 cm) 35" (88.9 cm) 38.5" (97.79 cm) Inner interbay management cover fits RU (38.5" long) FL-INIMP-7RU FL-INIMP-0RU FL-INIMP-RU FL-INIMPCVR-RU EIA Hole Spacing 3" Frame Fiber Cable Management Spools

25 Mounting Options 9" (48.6 cm) Rack Mounting Standard Mount (as shipped) Features Panels typically shipped from factory equipped for this mounting Panels shipped with - Left-side "L" bracket - Left-side.5" (6.3 cm) wide vertical cable guide (VCG) 5.00" (.70 cm) Rear Guard Box (optional with some racks) 7.50" (44.45 cm) 8.3" (46.5 cm).88" (55.58 cm) Rack shown for reference 5.00" (.70 cm) Flush Mount Rear Guard Box (optional with some racks) 6.65" (6.89 cm).94" (4.93 cm) 5.00" (.70 cm) Flush Mount Allows ", " or 4" (.54, 5.08 or 0.6 cm) recess mounting Kit includes: new vertical cable guide and mounting flanges 7.50" (44.45 cm) 5.9" (40.4 cm) Panel Height.75" (4.45 cm) 3.5" (8.89 cm) 5.5" (3.34 cm) 7" (7.78 cm) 8.75" (.3 cm) 0.5" (6.67 cm) 8.83" (47.8 cm) 9.60" (48.6 cm) Rack shown as reference 5.00" (.70 cm) FL-FLMT075 FL-FLMT0350 FL-FLMT055 FL-FLMT0700 FL-FLMT0875 FL-FLMT050 3

26 Mounting Options 9" (48.6 cm) Rack Mounting 9" Maximum Mounting REAR GUARD BOX (OPTIONAL WITH SOME RACKS) 7.50" (44.45 cm).88" (55.58 cm) 8.3" (46.5 cm) 9.00 (48.6 cm) RACK SHOWN FOR REFERENCE 0.4" (5.76 cm) 5.00" (.70 cm).93" 5.00" (.70 cm) 4.95" (.58 cm) 9" Maximum Allows entire panel to be contained within frame footprint Kit includes: new vertical cable guide with integrated mounting holes New VCG with integrated mounting holes Panel Height.75" (4.45 cm) 3.5" (8.89 cm) 5.5" (3.34 cm) 7" (7.78 cm) 8.75" (.3 cm) 0.5" (6.67 cm) 4" (35.56 cm) 7.5" (44.45 cm) FL-9MAX075 FL-9MAX0350 FL-9MAX055 FL-9MAX0700 FL-9MAX0875 FL-9MAX050 FL-9MAX400 FL-9MAX750 4

27 Mounting Options 3" (58.4 cm) Rack Mounting 3" Wide VCG Mounting Rear Guard Box (optional with some racks).50" (54.6 cm) 5.88" (65.74 cm) Rack shown for reference 5.00" (.70 cm) 5.00" (.70 cm) 3" with Large VCG Kit includes: new vertical cable guide with integrated mounting holes.3" (56.67 cm) 3" Wide VCG Mounting Panel Height.75" (4.45 cm) 3.5" (8.89 cm) 5.5" (3.34 cm) 7" (7.78 cm) 8.75" (.3 cm) 0.5" (6.67 cm) 4" (35.56 cm) 7.5" (44.45 cm) FL-3VCG075 FL-3VCG0350 FL-3VCG055 FL-3VCG0700 FL-3VCG0875 FL-3VCG050 FL-3VCG400 FL-3VCG750 5

28 Mounting Options 3" (58.4 cm) Rack Mounting Inner IMP Mounting Note: Standard mounting in a rack equipped with inner-imp Rear Guard Box (optional with some racks).50" (54.6 cm).3" (56.67 cm) 5.88" (65.74 cm) Rack shown for reference 5.00" (.70 cm) 5.00" (.70 cm) IMP 3" (58.4 cm) Centered (Extender Bracket Mounting) Rear Guard Box (optional with some racks) 5.00" (.70 cm) Extender Bracket.50" (54.6 cm) 8.3" (46.5 cm).3" (56.67 cm) 8.3" (46.5 cm) 5.88" (65.74 cm) Panel Height Rack shown for reference 5.00" (.70 cm) Extender Bracket 3" Rack Centered (with extender brackets) This kit can be used with flush mount brackets (see page 3) to achieve 3" flush mounting, as well as ", ", or 4" recess mounting.75" (4.45 cm) 3.5" (8.89 cm) 5.5" (3.34 cm) 7" (7.78 cm) 8.75" (.3 cm) 0.5" (6.67 cm) 4" (35.56 cm) 7.5" (44.45 cm) FL-EB075P FL-EB0350P FL-EB055P FL-EB0700P FL-EB0875P FL-EB050P FL-EB400P FL-EB750P 6

29 Mounting Options 9" ETSI and 600 mm Mounting 9" ETSI Mounting.88" (55.58 cm) 0.8" (5.5 cm)." (53.99 cm) 3.0" (7.67 cm) 5.0" (.70 cm) 4.85" (.3 cm) 5.0" (.70 cm) 9" ETSI Mounting Kit includes mounting brackets 600 mm Mounting Rear Guard Box (Optional with Some Racks) 4.0" (0.6 cm) 3.35" (59.3 cm) Panel Height.75" (4.45 cm) 3.5" (8.89 cm) 5.5" (3.34 cm) 7.0" (7.78 cm) 8.75" (.3 cm) 0.5" (6.67 cm) 4" (35.56 cm) 7.5" (44.45 cm) 7.7" (45.0 cm) 5.7" (38.79 cm) Rack Shown as Reference 4.0" (0.6 cm) FL-ETEB075 FL-ETEB0350 FL-ETEB055 FL-ETEB0700 FL-ETEB0875 FL-ETEB050 FL-ETEB400 FL-ETEB " (8.97 cm) 4.95" (.57 cm) 600 mm Mounting Kit includes mounting brackets Panel Height.75" (4.45 cm) 3.5" (8.89 cm) 5.5" (3.34 cm) 7.0" (7.78 cm) 8.75" (.3 cm) 0.5" (6.67 cm) 4" (35.56 cm) 7.5" (44.45 cm) FL-600MM075 FL-600MM0350 FL-600MM055 FL-600MM0700 FL-600MM0875 FL-600MM050 FL-600MM400 FL-600MM750 7

30 Patch Cords Singlemode - - S - M Cable Option FPC Connector on both ends (patch cord) FPT Connector on one end (pigtail) Length X Length in meters Cable Type Connector Type Leave 3 mm single SPSC SC ultra polish Blank M mm single APSC SC angled polish F.7 mm single SDSC SC duplex micron SPFC FC ultra polish Z 3 mm dual zip APFC FC angled polish mm dual zip SPST ST ultra polish T.7 mm dual zip AE E-000 angled polish SPLX LX.5 ultra polish 3 For hybrid patch cords, enter both connector types in this field and separate them with a slash mark; ALX5 SDLX LX.5 angled polish 3 LX.5 ultra polish duplex 4 remove S from the ultra polish connector options ADLX LX.5 angled polish duplex 4 (see second ordering example). One connector per end; requires dual zip cable 3 Requires 900 micron,.7 mm or mm cable 4 Requires.7 mm or mm dual zip cable Ordering Example SPLC SDLC LC ultra polish LC ultra polish duplex FPC-SPFC-0M: Patch cord with ultra polish FC connectors on both ends, mm dual zip cable, 0 meters in length with standard breakout length of " on both ends. FPC-SPST/PSC-S-0M: Patch cord with ST ultra polish connector on one end and SC ultra polish connector on the other end, 0 meters in length. Multimode Cable Option FPC Connector on both ends (patch cord) FPT Connector on one end (pigtail) M Length X Length in meters Cable Type Fiber Size Leave Blank 3 mm single M mm single A 50/5 F.7 mm single B 6.5/ micron Z 3 mm dual zip Connector Type mm dual zip MSC SC ultra polish T.7 mm dual zip MDSC SC duplex MFC FC ultra polish For hybrid patch cords, enter both connector types MST ST ultra polish in this field and separate them with a slash mark MLX5 LX.5 ultra polish 3 One connector per end; requires dual zip cable 3 MDLX LX.5 duplex 4 Requires 900 micron,.7 mm or mm cable 4 MLC LC ultra polish Requires.7 mm or mm dual zip cable MDLC LC duplex Ordering Example FPC-MST/MSC-B-7M: Patch cord with ST ultra polish connector on one end and SC ultra polish connector on the other end, 6.5/5 fiber size, 7 meters in length. 8

31 FasTerm Connectors Features: 6.5/5 or 50/5 µm multimode fiber size; 9/5 µm singlemode fiber Pre-radiused zirconia ceramic ferrrule Installs in less than three minutes with standard fiber optic tools (per Bellcore specifications) No need for access to electricity and curing ovens No mixing of epoxies or use of syringes with all of the advantages of epoxy-based connectors Complete self-contained assembly kit Each connector comes complete with strain relief boots for either 3 mm or 900 micron cable (.7 mm or 900 micron cable for LX.5 ) Connectors Multimode FasTerm Connectors SC connector ST connector LX.5 connector kit* Singlemode FasTerm Connectors SC connector ST connector FC connector Ultra polish LX.5 connector kit mm boot.7 mm boot 900 micron boot FTC-SCM FTC-STM FTC-LXM FTC-SCS FTC-STS FTC-FCS FTC-LXS- FTC-LXS- FTC-LXS-9 * Includes strain relief boots for either.7 mm or 900 micron cable Ordering information continues on next page. 9

32 FasTerm Connectors Tool Kits FasTerm Tool kits Multimode tool kit Singlemode ultra polish and multimode LX.5 tool kit Singlemode SC tool kit* Singlemode ST tool kit* Singlemode FC tool kit* FTC-KIT00 FTC-LXKIT00 FTC-KIT00-SC FTC-KIT00-ST FTC-KIT00-FC * Each tool kit is identical except for the polishing puck. Additional pucks may be purchased to expand the capabilities of a singlemode kit. Accessories Multimode consumables kit (00 terminations); connectors not included Singlemode ultra polish and multimode LX.5 consumables kit*; connectors not included Singlemode consumables kit*; connectors not included Multimode duplex SC connector clip (attaches FasTerm SC connectors for duplex requirements) Multimode duplex LX.5 connector clip (attaches LX.5 connectors for duplex requirements) Singlemode duplex SC connector clip (attaches FasTerm SC connectors for duplex requirements) LX.5 FastTerm training CD Crimp tool Inspection scope (00x) ADC recommends that one consumable kit be used for every 5 singlemode connector terminations. FTC-CNSM0 FTC-CNLX FTC-CNSM0 FBA-DCLIP-M FBA-DCLIP-MLX5 FBA-DCLIP-S FTC-LX5FasTerm-CD FTC-CRIMP FTC-SCOPE-00X 30

33 Fiber Connector/Adapter Cleaning Kit Fiber connector/adapter cleaning kit The fiber connector/adapter cleaning kit contains all the items required to adequately clean fiber connectors and adapters. The performance of an optical fiber system is largely dependent on the fiber connector cleaning procedures followed prior to installation. It is suggested that all the connectors and adapters be cleaned before making any connections. This kit contains an instruction sheet, lint-free wipes, isopropyl alcohol, cotton swabs, lint-free pipe cleaners and oil-free compressed air. The kit cleans approximately 500 connectors and/or adapters. FPC-CLNKIT 3

34 FL000 System Index E E-50-L39... F FBA-DCLIP-M...30 FBA-DCLIP-MLX FBA-DCLIP-S...30 FIPM-ACC-HC...8 FL-ACC FL-GIDE...7 FL-RPNL...9 FL-TS FL-WBOX...7 FL-44SPNL...0 FL-44SPNL...0 FL-6FSD FL-9MAX FL-9MAX FL-9MAX FL-9MAX FL-9MAX FL-9MAX FL-9MAX FL-9MAX FL-3VCG FL-3VCG FL-3VCG FL-3VCG FL-3VCG FL-3VCG FL-3VCG FL-3VCG FL-4GIDE...7 FL-4RPNL...9 FL-4TS55... FL-4WBOX...7 FL-8FSD FL-RSTORE...8 FL-36RPNL...9 FL-48RPNL...9 FL-48SPNL...0 FL-48SPNL...0 FL-48TS FL-4VAM55... FL-4WVAM55... FL-4WVAM55-B... FL-600MM FL-600MM FL-600MM FL-600MM FL-600MM FL-600MM FL-600MM FL-600MM FL-6PBLNK...8, 9 FL-6PMMDSC...9 FL-6PMMFC...9 FL-6PMMFC-Z...9 FL-6PMMLC...9 FL-6PMMLX...9 FL-6PMMSC...9 FL-6PMMSC-Z...9 FL-6PMMST...9 FL-6PMMST-Z...9 FL-6PSMAE...9 FL-6PSMAFC...9 FL-6PSMALX...9 FL-6PSMASC...9 FL-6PSMDSC...9 FL-6PSMFC...9 FL-6PSMFC-Z...9 FL-6PSMFC/SC...9 FL-6PSMLC...9 FL-6PSMSC...9 FL-6PSMSC-Z...9 FL-6PSMST...9 FL-6PSMST-Z...9 FL-6PSMST/SC...9 FL-6RSTORE...8 FL-6VAM FL-7RPNL...9 FL-7TS40... FL-96RPNL...9 FL-96SPNL...0 FL-96SPNL...0 FL-96TS75... FL-9VAM05... FL-ACC FL-ACC FL-ACC FL-ACC , 9, FL-ACC , 9, 0, FL-ACC FL-ACC0... FL-ACC0... FL-ACC0...8, 9, 0, FL-ACC , FL-BLNKFULL FL-BLNKFULL FL-BLNKFULL FL-BLNKFULL FL-BLNKFULL FL-BLNKVCG FL-BLNKVCG FL-BLNKVCG FL-CST FL-EB075P...6 FL-EB0350P...6 FL-EB055P...6 FL-EB0700P...6 FL-EB0875P... 6 FL-EB050P...6 FL-EB400P...6 FL-EB750P...6 3

35 FL000 System Index FL-ETEB FL-ETEB FL-ETEB FL-ETEB FL-ETEB FL-ETEB FL-ETEB FL-ETEB FL-EXPKIT...8 FL-FLMT FL-FLMT FL-FLMT FL-FLMT FL-FLMT FL-FLMT FL-HZSTORE...8 FL-INIMP-7RU... FL-INIMP-0RU... FL-INIMP-RU... FL-INIMPCVR-RU... FL-RSPLCE-FT...0, FL-RSPLCE-HS...0, FL-RSPLCE-MT...0, FL-RSPLCE-NT...0, FL-TR FL-VCGEXP...8 FL-WSPLCE-3M...8 FL-WSPLCE-FT...8 FL-WSPLCE-HS...8 FL-WSPLCE-MT...8 FL-WSPLCE-NT...8 FL-WSPLCE-RT...8 FPC-CLNKIT...3 FST-DRS-HS...0, FST-DRS-MT...0, FST-DRS4-NT...0, FST-M-3M...8 FST-M-FT...8 FST-M-HS...8 FST-M-MT...8 FST-M-NT...8 FST-M-RT...8 FTC-CNLX...30 FTC-CNSM FTC-CNSM FTC-CRIMP...30 FTC-FCS...9 FTC-KIT FTC-KIT00-FC...30 FTC-KIT00-SC...30 FTC-KIT00-ST...30 FTC-LX5FasTerm-CD...30 FTC-LXKIT FTC-LXM...9 FTC-LXS-...9 FTC-LXS-...9 FTC-LXS FTC-SCM...9 FTC-SCOPE-00X...30 FTC-SCS...9 FTC-STM...9 FTC-STS...9 I IPA-K...8, IPA-K...8, P PWUEF-7ERN... PWUEF-7X9ERN... U UEGP-7PW 33

36 Web Site: From North America, Call Toll Free: Outside of North America: Fax: For a listing of ADC s global sales office locations, please refer to our web site. ADC Telecommunications, Inc., P.O. Box 0, Minneapolis, Minnesota USA Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 803 4/03 Revision 994, 996, 000, 003 ADC Telecommunications, Inc. All Rights Reserved