ISOBUS Working Set. One or more ISOBUS modules that control an implement s functionality. Main module is called the Working Set Master (WSM).

Transcription

1 ISOBUS Training

2 What is ISOBUS? ISO International standardized communication protocol Allows different agricultural equipment to share a common language Governs physical components Cables, connectors, and data link Ag Leader is compatible with the ISOBUS standard Compatible vs. compliant

3 What is ISOBUS

4 ISOBUS Working Set One or more ISOBUS modules that control an implement s functionality. Main module is called the Working Set Master (WSM). WSM handles: loading object pool Coordinating communication between WS and VT

5 Object Pool Graphical UI elements Sent by WSM on first connection with VT. Size dependent upon complexity of module UI. 1GB Memory in display for object pool data Usually stored locally in VT display memory. Status indication during pool load.

6 Virtual Terminal (VT) Defines graphical User Interface (UI) components that ISOBUS modules present on a compatible display The VT doesn t understand anything it presents. Simply communicates with the Working Set Master (WSM) by sending key press events.

7 Virtual Terminal (VT) Standard feature on INTEGRA 2.1 firmware and newer. Engineered to work with Version 3 Virtual Terminal. Supports VT version 3 Auxiliary Functions. Will NOT support VT version 2 Auxiliary Functions. No unlock required on Integra, Versa requires unlock VT must be enabled by user on General tab of Display Setup.

8

9

10

11 Object Pool(s) can be manually cleared with the Clear Saved Device interfaces button

12 Display Cable Details CAN A is reserved for Ag Leader modules. CAN B is reserved for ISOBUS modules. Currently don t support OT2 and ISOBUS at the same time.

13 Connecting the Display Cable To Display Power Out Power Control Relay ISOBUS/ParaDyme Installation GPS CAN A Power In ISO CAN Out Ethernet ParaDyme Relay Cable Existing Tractor ISOBUS ISO CAN In Existing Tractor ISOBUS

14 ISOBUS Cab Connection The ISOBUS display cable is designed to T into most tractors via existing ISO Standard 4 pin Deutsch connectors. These connectors are often found behind the access panel on right side of cab. Refer to ISOBUS System Reference for known T locations. John Deere 8330 Case Magnum 210 Challenger MT 7XX

15 ISOBUS Cab Connection Ability to plug into 9-pin Amp connection on certain machines R-Series Deere tractors Fendt tractors Addition of power for auxiliary devices

16 AGCO Challenger Adapter Cable Required for proper termination of the Challenger ISO-Bus on C- Series tractors. Cable- AGCO Challenger ISOBUS Terminator (P.N )

17

18 ISOBUS Retrofit Kit ISOBUS Retrofit Kit (Generic Tractor) (PN: ) Designed to convert Non ISO-Ready tractors to ISO-Ready.

19 ISOBUS Retrofit Kit (Generic Tractor) Components Kit Includes ISOBUS IBBC/Power Relay Assembly (P.N ) Cable- ISOBUS/Power Control Extension (10FT) (P.N ) Cable- ISOBUS Active Termination (P.N )

20 Additional Cabling Required An ISOBUS battery cable must be purchased in addition to the Retrofit Kit. Measure the distance between the Battery and the IBBC/Power Relay Assembly ISOBUS and choose appropriate. Cable-ISOBUS Battery (8 FT) Cable-ISOBUS Battery (16 FT) Cable-ISOBUS Battery (22 FT) New style with MIDI fuse

21 High Current Relay Module Provides 12V switched power to pins 1 and 3 ISO plug via high current relay. Fuse cover removed exposing 30A and 60A fuses.

22 CAN Power Module CAN A Relay Provides +12V power to CAN A CAN B Relay Provides +12V across Pins 2 and 4 of IBBC.

23 Power Control Power Control is performed through the CAN Power Module. ISOBUS/Power Control Extension cable is connected at the module and routed to ISO Display cable in the cab. ISOBUS/Power Control EXT (10FT) ISOBUS/Power Control EXT (18FT)

24

25 Troubleshooting

26 Troubleshooting VT Quick Reference Guide Included in ISOBUS Retrofit Kit (Generic Tractor) (P.N ). Step through troubleshooting flowcharts 1-9.

27 CAN Power Module LEDs LED #1 (Blue) Indicates that the module is receiving high current power (12V) from the display energizing the High Current Relay Controlling High Current across Pins 1 and 3 of the ISO plug. Led #2 Green Indicates CAN A is being provided High Current power(12v) from the CAN A Relay of CAN Power Module. LED #3 (Green) Indicates ISOBUS/CAN B is being provided High current power (12V) across pins 2 and 4 of ISO Plug from CAN B relay.

28 Advanced Troubleshooting

29

30 Active Object Pool(s) Capture Snapshot of current Screen Enable the VT Bug Button Set Advanced Parameter #48 to 1 Insert USB stick into Integra Bug button will not be enabled until USB stick has been inserted Must have object pools to aid in troubleshooting

31 ISOBUS CAN Logger Utility

32 ISOBUS CAN Logger Utility Used When: The ISOBUS implement Object Pool won t load on INTEGRA VT, -ORand the Status Bar remains Active for 15 minutes or more. The Object Pool will load but there is some other functional issue.

33 ISOBUS CAN Logger Utility System Requirements: Laptop CAN Simulator Package (P.N ) CABLE-ISO-USB Interface (PN: ) Note: Download updated driver at:

34 ISOBUS CAN Logger Utility System Requirements: CABLE-ISO-USB Interface (PN: ) 9 PIN FEMALE PLUG-DEUTSCH, 4 PIN BLACK RECEPTACLE-DEUTSCH, 4 PINBLACK

35 Cabling Diagram- OEM BUS OEM ISOBUS PLUG-DEUTSCH, 4 PIN BLACK ISO-USB Interface (PN: ) RECEPTACLE-DEUTSCH, 4 PINBLACK 9 PIN FEMALE ISOBUS Display Cable (P.N ) To Display

36 ISOBUS CAN Logger Operation

37 ISOBUS CAN Logger Operation 1. Plug in SYSTEC CAN-USB Adapter to laptop BEFORE starting the ISOBUS CAN Logger. 2. Start the CAN Log Utility Program DO NOT run simultaneously with Ag Leader CAN simulator or any other program that uses the SYSTEC CAN-USB Adapter.

38 ISOBUS CAN Logger Operation 3. Start Logging CAN data by clicking on the GO button. Default Directory is: C:\Program Files\ISOBUS CAN Logger\Log Files 4. Verify CAN data is being received. -White and Green Progress Bar indicates CAN data being received.

39 ISOBUS CAN Logger Operation 5. Power-up modules and INTEGRA display. 6. Stop the CAN Logger by clicking the Stop button WHEN: Object pool Status Bar activity stops (wait several seconds after it becomes inactive before stopping the CAN Logger) OR Object pool Status Bar remains continuously active longer than 15 minutes.

40 ISOBUS CAN Logger Operation 7. Zipped CAN Log files to Ag Leader Technical Support. Also Include: A completed VT Troubleshooting Worksheet ECU object pool(s)