TESA UNITEST Internal Micrometer

Transcription

1 TESA UNITEST Internal Micrometer DIN 86 T4 (Style B) Measurg element Micrometer and dial gauge to 0,01 Micrometer: 0,1 Micrometer: 25 Measures ternal dimensions the micrometer s axis with 2-pot contact with the workpiece to be checked Optional accessories are available for spectg centrg shoulders and bld bores as well as auxiliary means for external measurg. Extensions with built- gauge rods can be mounted on the measurg element, thus allowg any dimension with the application range to be measured, directly. Precise, easy-to-handle micrometer Horizontal or vertical position of use Constant measurg force Integrated dial gauge to show you the culmation pot. 0,5 Dial gauge: ± 0,22 0,7 to 1 N 8 µm Measurg bolts Spherical end for measurg the micrometer axis. All serts are terchangeable. Tungsten carbide tipped Extensions 26 dia. steel tube with snap-rg system. Also with built- gauge rods. TESA UNITEST complete set Tungsten carbide tipped One spherical and one flat measurg faces Intern. dimen Consistg of: Additional data Wooden case Settg standard with identification number of conformity µm Measurg element for ter. dimen Settg standard for ternal/external dimensions Extension 25 0, Extension Extension 100 1, Extension 200 2, Extension 00, Extension 500 5, Special screwdriver Wooden case for complete set Optional Accessories Extension Pair of tungsten carbide tipped measurg bolts for bld bores Auxiliary elements for external measurement Measurg depth: Suspension device, complete Measurg depth: D-

2 TESA UNIMASTER Universal Measurg Instrument Provides the features necessary for direct measurement of specially large ternal and external dimensions. TESA UNIMASTER is similar to ternal micrometers with two-pot contact with the workpiece. Performs direct measurement of any dimension with the extended application range by simply addg the needed extensions with built- gauge blocks to the measurg element. Accurate, robust and easy-to-handle Can be used either vertically or horizontally with a constant measurg force Incorporates a lever-type dial test dicator that clearly shows the culmation pot Ensures stable measurg owg to both negligible deflection and thermal protection on each extension. DIN 86 T4 (Style B) Messelement Micrometer and dial test dicator: 0,01 Micrometer: 25 1 Dial test dicator: ± 0,4 15 to 20 N. Mobile ball-bearg anvil under sprg pressure. Reversible probg direction to allow both ternal and external measurg 5 µm Measurg bolts Tungsten carbide tipped Measurg bolts supplied pairs: No for ternal measurg the micrometer axis. No for ternal/ external measurg, meas. depth up to 60 from the lower edge of the micrometer. No , extra-rigid for external measurg, meas. depth up to 75 from the lower edge of the micrometer Extensions 8 dia. diameter steel tube with snap rg system. Built- gauge rod. Tungsten carbide tipped One spherical and one flat measurg faces D-4

3 TESA UNIMASTER complete set Internal dim * * External dim * 9 58* Consistg of: Additional Data Wooden case Measurg element and settg standard with identification number µm Measurg element ternal dim external dim Pair of measurg bolts for ternal measurg Pair of measurg bolts for ternal/external measurg, with length to Pair of measurg bolts for extern. measurg, length Settg standard ternal dimension external dimension Extension 25 0, Extension Extension 75 1, Extension 100 1, Extension 125 1, Extension Extension 00, Extension 450 4, Extension 600 6, Special screwdriver for extensions Set of suspension accessories (4 brackets together with 4 clamps) Wooden case for complete set Optional Accessories Extension Pair of measurg bolts for ternal/external dimensions and grooves Measurg depth 20 Tungsten carbide serts Ø 4 x Support roller supplied dividually (2 items are needed) * Usg extensions at the very most D-5

4 TESA INOTEST Comparative Measurg Instrument Allows large ternal and external dimensions to be measured by comparison. Consists of a measurg element with terchangeable serts as well as a set of extensions. Sce there is no material measure, the dication is set usg a separate reference standard that can either be a gauge block, settg rg or horizontal measurg bench. Measurg serts for spection tool axis, or offset serts Vertical or horizontal position of use Integrated dial gauge to show the culmation pot Constant measurg force Extensions with heat sulatg grip. Measurg element Mobile ball-bearg anvil, 10 measurg travel Watertight dial gauges and ,01 or or 0.40 Additional technical data, see section E 4 to 7 N. Reversible probg direction to allow both ternal and external measurg Measurg bolts Tungsten carbide tipped Measurg bolts supplied pairs: No for ternal measurg the strument axis No for ternal/ external measurement, measurg depth up to 0 from the lower edge of the tool Extensions 25 dia. steel tube. 19 dia. telescopic tube that can be clamped. Additional data Plastic case Dial gauge with serial number Dial gauge with spection report D-6

5 TESA INOTEST complete set Internal dimen External dimen Consistg of: Measurg element with dial gauge Pair of measurg bolts for ternal measurg Pair of measurg bolts for ternal/external measurg with length to restg rods Ø 7 x sulatg grips (order number for 1 item) Extension ternal dimensions Extension ternal dimensions Extension ternal dimensions Extension ternal dimensions Plastic case for complete set Optional Accessories external dimensions Extension for extendg the application range by external dimensions external dimensions Extension for extendg the application range by external dimensions Pair of tungsten carbide measurg bolts for ternal/external dimensions Ø 4 x Pair of tungsten carbide measurg bolts for grooves Ø 4 x Measurg device for small ternal dimensions external dimensions D-7

6 ETALON 52 Internal Micrometer This ternal micrometer is designed for measurements with 2-pot contact. Extensions with built- gauge rods to crease the measurg range Stiff screw couplg. Factory standard Micrometer element 0,01 15 Complete sets ,5 Consistg of: Spherical (R = 15 ) Tungsten carbide tipped µm Micrometer element Extension 15 4, Extension 0 4, Extension Extension Extension Extension 480 6, Extension 500 6,5 Extensions Reference gauge rods 29 Tungsten carbide tipped Additional data Wooden or plastic case ROCH Periphery Tapes Steel tapes with a dual graduation for measurg external circumferences and diameters of cyldrical parts on maches and other fittgs Suitable for malleable parts such as plastic tubg Used for spectg tanks or boilers Also designed for checkg steel or concrete pipes, rims, tires etc. Factory standard 0,1 See table Diameter Circumference , , , , , ,5 16 x 0,2 type section Steel band Shippg packagg D-8

7 Instrument ETALON ZEDURAM LC display 1, 0,1, 0,01, 0,01 10 x 6,5 (H x W) Metric/ch conversion Internal/external diameters from 50 up to or 14 to 800 Radii on concave and convex surfaces from 175 up to or 7 up to 400 heights (drawg): 120 to ,75 to + 9,8 Angles (drawg): 50 to + 95 Diameter sizes from 50 to 2000 : 0,05% 2000 to 5000 : 0,1% 5000 to : 0,% to : 0,6% Heights: 0,04 Angles: 0,0 Infrared data transfer (ZEDURAM 2020 only) 2 batteries 1,5 V, AA, LRC 6 ETALON ZEDURAM Universal Measurg Instrument Electronic The other way of measurg Brgs quality control to practice. Easy, reliable measurg even the toughest surroundg conditions. Perfect for spectg large ternal and external diameters as well as radii, circumferences, heights and angles. Capable to compute the mean value of n sgle values. Error-free readg of the numerical display. Permanently ready-to-measure with battery power. Infrared data transfer to the prter. Cyldrical Surface Measurement Measures ternal and external diameters from 50 up to Measures radii on concave and convex surfaces from 175 up to Displays any related circumference. Versatility Measures metal, plastic or wood pieces of work. Checks formg processes, e.g. on metal sheets and tubes. Inspects distortion durg bendg and contuous roundg operations of metal sheets to cylders or boiler bottoms and the like. Measures manufactured and mached pattern parts (profiles) made from metal, plastic or wood. 10 C to 40 C -10 C to 50 C 80%, with no condensation EN EN Housg anodized alumium; restg cylders hardened steel 420 x 160 x 90 (max. L x H x D) Net weight of ma part: 2,4 kg; gross weight of ZEDURAM complete: 4,6 kg (No ) 5,1 kg (No ) Height Measurement Measures height the form of step and thickness dimensions up to 250. Determes ternal dimensions such as the distance between two parallel surfaces if the probe constant is taken to account. D-9

8 Angle Measurement Allows workpiece positiong with or without the use of the rules Plastic case Identification number HP B Prter Matrix prter for use with the 57 wide thermal paper roll HP Cableless, frared data transfer (ZEDURAM 2020) Transfer distance: 450 / 18 Max. reception angle: ± 60 (horizontal) -10 to + 20 (vertical) a 4 batteries 1,5 V, AA, + type LRC 6 0 C to 50 C a -40 C to 60 C 5% to 95% at 40 C, non-condensg Security: EN 60950: ETALON ZEDURAM 2010 furnished with: For measurg large diameters as well as heights and angles; numerical display with 1 to 0,01 resolution; battery-powered A1, A2 EN EN 55022: 1994 Class B EN :1995 EN : Set of 4 batteries, 1,5 V, AA, type LRC 6 Restg discs Rules for angle measurement 91 x 61 x 186 0,4 kg ETALON ZEDURAM 2020 Also cluded: Identical to No , but with added frared data transfer capability 1 1 Matrix prter with frared data transfer, type HP 82240B Thermal paper roll, 57 wide, type HP D-10

9 Laser Distance Meters Fast and effective Capture long distances very quickly, with no additional help. Accurate and reliable Measure any distance up to 200 meters most accurately and reliably. User-friendly Elimate the need for tiresome manual calculation. Versatile Made for door and outdoor applications as well as any hard-to-access areas. Laser switches off itself after m. or 6 m. for the tool. Automatically for both. TESA SPACER 100 Distance measurement with everyone s reach! Small but strong, this laser meter fits any pocket and can be used everywhere. Provided with a laser range up to 100 m along with shortcut keys that make addition, subtraction, surface and volume calculations easier. IP54-10 C to + 50 C -25 C to + 70 C Identification number Suited carryg case User s manual with safety structions Shortcut keys enablg Addition and subtraction of measured values Calculation of surfaces and volumes MIN/MAX distance measurement TESA SPACER 100 Provided with one set of 2 batteries, AAA, type LR 0, 1,5 V. Also with dust cover. Optional Accessory Set of 4 spare batteries, AAA, type LR 0, 1,5 V. D-11

10 TESA SPACER 200 Versatile, also with ergonomic design Handy, easy-to-use. Includes a viewfder for easy targetg along with a practical foldg datum end piece for measurg short and long distances. Identifies the right datum value automatically. Ergonomic design Laser range up to 200 m Foldg datum end piece Built- view fder (2x magnification) Integrated spirit level Laser switches off itself after m. or 6 m. for the tool. Automatically for both. IP54-10 C to + 50 C -25 C to + 70 C Identification number Suited carryg case User s manual with safety structions TESA SPACER 200 Provided with one set of 2 batteries, AAA, type LR 0, 1,5 V. Also with dust cover. Optional Accessory Set of 4 spare batteries, AAA, type LR 0, 1,5 V. Also available upon request Model with Bluetooth wireless connection D-12

11 Ma functionalities with additional key features Surfaces / Volumes Space measurement Release switch MIN/MAX distances, contuous measurement Addition / Subtraction Storage of constant values Recall of last measured values Illumated display Multifunction end piece Couplg thread for tripod 1 /4 Integrated view fder Built- spirit level Spacer 100 Spacer Technical Data Spacer 100 Spacer 200 Accuracy* ± 1,5 ± 2 Laser range Numerical scale Distance Laser pot diameter 0, m 0, m 0,000 m, 0,00 m 0,000 m, 0,00 m, ft, /16 ft, 0.00 ft, /2 ft, /16, 0.0, 0 1 / /2, 0.0, 0 1 /2 10, 50, 100 m 10, 50, 100 m 6, 0, 60 6, 0, 60 Autonomy» 5'000 measurements» 10'000 measurements Batteries Type AAA, 2 x 1,5 V Type AA, 2 x 1,5 V Dimensions 15 x 45 x x 64 x 6 Weight (with batteries cluded) 145 g 241 g Laser wavelength 65 nm, < 1mW 65 nm, < 1mW * Measurg accuracy up to 0 m (standard deviation 2 s). The max. deviation may be measured under bad conditions, e.g. high sunlight radiation or low reflective poted surface. This deviation may crease by at least ±10 over 0 m without target plate. Laser safety Both laser distance meters belong to the safety class II. This means that even if the laser beam is advertently focused by the eye, the natural reflex of blkg will prevent any eye damage. D-1