Design Features of C&K Smart Card Connectors

Transcription

1 Design Features of C&K Smart Card Connectors C&K Components has a successful track record of manufacturing innovative interconnect devices with a strong emphasis on reliability and flexibility. s a long established supplier of such devices for Smart Cards in a wide range of applications, we have extensive experience matching performance with the need to remain cost sensitive. We consider the true cost of the interconnect to be a function not just of price, but also the ease with which the device can be integrated into the customer's production process and its performance in the field. We have built in a number of features which set our products apart, such as: Inlay contact finish Contact design means of applying precious metal to the contact area utilizing pressure as opposed to conventional plating. We have found this to be the most durable finish available without compromising the electrical performance of the contact. Our research has shown that our inlay finish lasts over ten times as long as standard gold plating. Where we state the life of the precious metal this is intended to be the worst case scenario, because the test has been made using the most abrasive smart card that we can find on the market (given that the equipment maker can rarely control which smart cards are used). Note that the inlay finish is silver in color, being an alloy of gold, silver, and palladium. The geometry of the contact has an important bearing on its electrical performance. Our contacts are designed to give an efficient wiping action and to maximize the stress between contact and card, thus minimizing the contact resistance. The spooned contact area is also shaped so as to protect it from damage during card insertion. Card detection switches s a manufacturer of switches as well as interconnects, we have been able to integrate high performance dome switches into many of our devices. These are variants of switch products which are already in high volume production as stand alone components. PCI (security standard for POS applications) Two levels of PCI compatibility level are available: PCI ready: Specific features are designed in the connector in order to ease the integration of security devices around and below the connector. PCI: dditional accessories are integrated on the connector in order to avoid access to the data contacts and to detect any connection attempt. Mechanical robustness Four metal pegs, to be soldered in PC metalized holes at the same time than the SMT terminals, have been designed on the smart card connectors in order to increase the resistance of the connector to card insertion force. This participates to the life time and to the overload resistance. Materials The contact material has been chosen because of its resistance to atmospheric pollution, solderability and performance over time in giving a consistent normal force. Since all of our new interconnects are designed for surface mounting, the plastic materials used must withstand high temperature soldering processes without deforming or adversely affecting performance. 4

2 Product Selection Guide FULL SIZE CRD CONNECTORS Series CCM0 CCM0 CCM04 pplications Professional Professional Consumer/Professional PCI* EMV Insertion force PCI ready PCI/PCI ready 40N max 40N max 0N max Overload Card guide Sealed switch Operating life Contact plating Number of contacts Contact type Page No. 50N 00,000 cycles inlay 8 friction 80N 500,000 cycles inlay 8 friction 40N >50,000 cycles gold 6 or 8 friction/vandal proof 7 7 SIM / SM CRD CONNECTORS Series pplications Cover Operating life CCM03 Consumer/Professional hinged / fixed 0,000 to 50,000 cycles CCM04 Consumer/Professional hinged / fixed 30,000 cycles Sealed switch Contact plating Card end travel switch Number of contacts Page No. inlay / gold inlay / gold with / without without 6 or 8 6 or * PCI PCI ready: specific features are designed into the connector in order to ease the integration of security devices around and below the connector. PCI: specific additional accessories are integrated on the connector in order to avoid acess to the data contacts and to detect any connection attempt. 5

3

4 Features Operating life up to 00,000 cycles 40N card insertion force EMV PCI ready Card detection sealed switch Typical pplications Transaction Identification POS CCM0 MK Series Mechanical Number of Contacts 8 Mechanical life Up to 500,000 cycles Card insertion force 40N max. Card extraction force N min / 0 N max Contact force 0,N / 0,50 N max Card detection switch 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm from card stop),8 N max for complete depression Vibration Frequency 0 to 500 Hz. cceleration 50m/s Duration 6 hours - amplitude 0,35mm Max elect. discontinuity µs Shock Peak value 500 m/s Duration ms 3 shocks in each direction of each axis Packaging Tray 30 parts / Cartons 300 parts Reel 00 parts / Cartons,000 parts Contact Electrical Data Insulation resistance,000 MΩ min Resistance 00 mω max Current rating 0 µ min / max Dielectric strength 750 Vrms min Switch Electrical Data Card detection switch Normally open Contact resistance 00 mω max Dielectric strength 50 Vrms min Current rating m min / 0 m max Maximum power 0. V Environmental Data Operating temperature -40 C to +85 C Damp heat IEC 5 test number c (0 days) Salt mist IEC 5 test number f (96 hours) Card detection switch Sealed against dust RoHS compliant Full Size Soldering Compatible with lead free SMT reflow soldering process Designation Termination Operating Life Card Insertion Force CCM0-07LFT SMT 00,000 cycles 40N 7 Dimensions are shown in mm

5 CCM0-07 LFT 55,7±0, 0,7, 54,3 Card entry +0,05,05-0,5 Card entry 4,55±0, (9,6) Full Size 8,87 0,3 0,7 5,5 3 4 x,54 (7,6) 0 0,45 36, ,6 7,6 9,6 0,9±0,5 5,5 CCM0 MK Series DETIL Scale 5 0,85 4 metal pegs for,6 PC 0x,±0, ø ±0,05 0, - Designation & Date-Code area SEE DETIL 5,85 Card stop 07T XX XX 0 Pick and place area ø 3 4,5±0,3 Card entry Card insertion direction Plastic outline Contact foot area x 0,7 Pad 0 RECOMMENDED PC ORD LYOUT (Component side) 8,87,4 3,95 6,49 9,49 SW 33,49 SW 5,5 4 0,9 9, C,5 8x C C3 C4 (,64) 3,8 9,6 3,8 5, Card end travel switch terminals 0,85 x 0,7 (55,7) Scale 0,5 C5 C6 C7 C8 07T XX XX (50,) (36,5) 0 Contact location according to ISO/IEC 786-,,3 0x 0, 4x ø 0, ø, Metallized holes 8 Dimensions are shown in mm

6 CCM0 MK5 Series Features/enefits Operating life 500,000 cycles Low profile 4 mm and 3. mm height PCI ready Card detection sealed switch Typical pplications Transaction Identification POS MPOS Mechanical NUMER OF CONTCTS: 8 MECHNICL LIFE: 500,000 cycles CRD INSERTION FORCE: 0 N max. CRD EXTRCTION FORCE: N min. / 0 N max. CONTCT FORCE: 0, N / 0,60 N max. Packaging Tray 5 parts or Reel 350 parts Soldering Compatible with lead free SMT reflow soldering process Contact Electrical Data INSULTION RESISTNCE:,000 M Ω min. CONTCT RESISTNCE: 00 m Ω max. CURRENT RTING: 0 µ min. / max. DIELECTRIC STRENGTH: 750 Vrms min. Switch Electrical Data CRD DETECTION SWITCH: Normally open CONTCT RESISTNCE: 00 m Ω max. DIELECTRIC STRENGTH: 50 Vrms min. CURRENT RTING: m min. / 0 m max. MXIMUM POWER: 0. V Full Size Environmental Data OPERTING TEMPERTURE: CRD DETECTION SWITCH: RoHS compliant -40 C to + 85 C Sealed against dust How To Order To order, simply select desired option from each category and place in the appropriate box. For additional options not shown in catalog, consult our Customer Service Center. C C M 0 - L F T Cover Material 5 Plastic, 4.0 mm height 6 Metal, 3. mm height 7 Plastic, I/O Contact Tail on PC 0 Short, recessed (best for PCI) Long (accessible, easy rework) Long + metal pegs (40 N overload) 3 Short, no pegs ESD Protection 3 Full ESD protection (card edge & IC) 4 Card edge ESD (only for metal version) 5 Low cost ESD (card edge for plastic cover) Lead Free RoHS LFT Tin plated termnals NONE Leave blank E only applicable with metal pegs option (CCM0-xx) Packaging T5 Pack tray 5 parts R35 Pack reel 350 parts 9 Dimensions are shown in mm

7 ( CCM0-604 LFT T5 Metal cover, short tails DETIL Q SCLE 5,65 0,,05 0, 0x 0,7 0,3 Card entry54, Card entry,9 0,0 5 ( CCM0 MK5 Series 56,9 ) 0,76 0, 7,6 8,89 44,45 5,08,54,54 7x 0 ( 56,5 ) ( 3, ) C Pick & place area 3 0, SECTION C-C 7,6 5,, 0 8,89,43 3,97 6,5 9,05,59 4,3 6,67 3,75 34,9 43,88 44,45 46,85 49,35,36 3, SEE DETIL Q 7,54 9,5 3,35 5 Card stop 9,5 7,95 7,5 5,65 9,5 7,85 0 C5C6CCC3C4C7C8 SWSW 0x, 0, 0, x 3 0, 0,8 4,5 9,5 0,8 x +0, 0 0, 3,8 x 0 C See note 8 56,9 0,,,35 0, Card entry x,5 RECOMMENDED PC ORD LYOUT ( component side ) CCM0-53 LFT T5 Plastic cover, long tails, full ESD protection DETIL Q SCLE 5,66 0,,05 0, 0x 0,7 0,3 Card entry54, Card entry,9 0, ) 0,75 0, 5,08,54 8,89,54 7x 7,6 44,45 0 ( 56,5 ) ( 3,8 ) 6 ESD Contacts 3,8 C Pick & place area 3 SEE DETIL Q 0,8 8,54 9,5 0, SECTION C-C 4 5 7,5 Card stop 9 4,5 7,5 5 5,65 9,5 0 9,5 0,8 7,6 5, 0 8,89,43 3,97 6,5 0x, 9,05,59 4,3 6,67 0, 3,75 34,9 C5C6CCC3C4C7C8 SWSW 44,45 46,85 49,35 0, x 0 C 57 0,,65 0, Card entry x +0, 0 0, RECOMMENDED PC ORD LYOUT ( component side ) 0 Dimensions are shown in mm

8 ( CCM0-53 LFT T5 Plastic cover, long tails, metal pegs,66 0, 0,75 0,,05 0, Card entry 6 ESD Contacts 3,8 0x 0,7 54, Card entry 38,88 7,6 44,45 0,3,88 x,3 8,89,54 5,08,54 7x C Pick & place area 3 0 0,,9 0,0 5 SEE DETIL Q 8,54 0,8 9,5 DETIL Q SCLE 5 3,5 0, SECTION C-C 4 5 ) 7,5 Card stop 9 4,5 7,5 5 5,65 9,5 3, ,5 9,5 0,8 ( 56,5 ) 7,6 5, ( CCM0 MK5 Series 0 8,89,43 3,97 6,5 6x ( 3,8 ) 0x, 57 ) 9,05,59 4,3 6,67 0, 3,75,5 Metallized holes C 0, D 34,9 38,88 C5C6CCC3C4C7C8 SWSW E 44,45 46,85 49,35 F 0, x 0 Full Size C 57 0, CCM0-64 LFT T5 See note 8,65 0, Card entry Metal cover, long tails, no ESD protection x +0, 0 0, 0,88 8,88 9,88 RECOMMENDED PC ORD LYOUT ( component side ) 39,88 DETIL Q SCLE 5 0,75 0,,6 6 0,,05 0, Card entry54, Card entry 7,6 0x 0,7 44,45 0,3 8,89,54 5,08,54 7x 0,9 0,0 5 ( 56,5 ) ( 3, ) 57 C Pick & place area 3 0, SECTION C-C 7,6 5,, 0 8,89,43 3,97 6,5 9,05,59 4,3 6,67 3,75 34,9 43,88 44,45 46,85 49,35,35 SEE DETIL Q 3,36 Card stop 9,5 9 7,5 5,65 C5 C C C6 C3 C7 C4 C8 SW SW 3, 8,54 9,5 5 7,85 9,5 0 0x, 0, 0, x 3 0, 0,8 4,5 9,5 0,8 x +0, 0 0, 3,8 x 0 C 57 0,,,35 0, Card entry x,5 RECOMMENDED PC ORD LYOUT ( component side ) Dimensions are shown in mm

9 CCM0 MK Series Features Operating life 500,000 cycles Insertion force 40N EMV PCI & PCI ready Card detection sealed switch Typical pplications Transaction Identification POS Full Size Mechanical Number of Contacts 8 Mechanical life 500,000 cycles min Card insertion force 0N to 40N Card extraction force N min / 0N max Contact force 0,N / 0,50N max Card detection switch 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm from card stop),8 N max for complete depression Vibration Frequency 0 to 500 Hz. cceleration 50m/s Duration 6 hours - amplitude 0,35mm Max elect. discontinuity µs Shock Peak value 500 m/s Duration ms 3 shocks in each direction of each axis Packaging Tray 30 parts / Cartons 300 parts Reel 0 parts Soldering Compatible with lead free reflow soldering process For version with security cover, please contact Customer Service for soldering recommendations. Contact Electrical Data Insulation resistance,000 MΩ min Resistance 00 mω max Current rating 0 µ min / max Dielectric strength 750 Vrms min Switch Electrical Data Card detection switch Normally open Contact resistance 00 mω max Dielectric strength 50 Vrms min Current rating m min / 0 m max Maximum power 0. V Environmental Data Operating temperature -40 C to +85 C Damp heat IEC 5 test number c (0 days) Salt mist IEC 5 test number f (96 hours) Card detection switch Sealed against dust RoHS compliant PCI Features Designation Termination Contact Type I/O Protect Security Cover Total Height (mm) Dimension PC version CCM0-503LFT THT landing 6,5 38,5 X 55,6 4 clips CCM0-504LFT SMT landing 6,5 38,5 X 55,6 4 clips CCM0-F503LFT THT friction 6,5 38,5 X 55,6 4 clips CCM0-F504LFT SMT friction 6,5 38,5 X 55,6 4 clips CCM0-F844LFT SMT friction Yes Yes 6,6 40,5 X 58 4 metal pegs Dimensions are shown in mm

10 CCM0 MK Series PCI: I/O Protect Definition Special accessory in order to avoid and detect frontal access to data contact. It is electrically connected to the PC through spring finger contacts. Process It must be in open position during the reflow soldering of the connector and has to be locked in closed position after soldering. Full Size I/O Protect locking tool C&K is proposing a manual tool to lock the I/O protect accessory after soldering. Ordering code: C-CM0-E50 PCI: Security Cover Definition It is a multilayer cover placed over the connector to avoid and detect data contact access, especially from the top. It is connected to the PC through 6 SMT terminals that are soldered at the same time as the other smart card terminals. Process Please contact your Sales Representative for advice and recommendations about soldering this version. 3

11 CCM0 MK Series CCM0-503 LFT / CCM0-F503 LFT 55,6±0, Full Size,6 PC Thickness 38,5 6,5 4 Snap Feet , 0x 0,3 0,7 5 Designation & Date-Code area "CCM0" marking is optional 5x,54 4x Embossed Channel ø 0, 0,95 4,3±0, 3,5 SEE DETIL 0 4 (3,),7,7 3, DETIL Scale 5,9±0, - 5,75 ±0,5 4 5,7 Card stop F503T XX XX 0 7,7±0,3 Card insertion direction 4,5±0,3 Card entry RECOMMENDED PC ORD LYOUT (Component side) Plastic outline 0 9,,66 4, 6,74 9,8 3,8 5 0 SW SW C C C3 C4 3,,7 Card end travel switch terminals (55,6) 0 3,8 F503T XX XX,7 3,8 (50) (38,5) 4 C5 C6 C7 C8 0,8 Contact location according to ISO/IEC , ø 0 0x ø 0, +0, (4x) ø 3, 0 ø 0, 4 Dimensions are shown in mm

12 CCM0-504 LFT / CCM0-F504 LFT CCM0 MK Series Full Size Contact location according to ISO Dimensions are shown in mm

13 CCM0 MK Series CCM0-F844 LFT / CCM0-F844 LFT 58±0,3 0,±0, DETIL Scale 5 0,7,05 Embossed Channel 0,95 4,3±0, +0,4 3, -0, 0,8 0,8 Full Size (4x) 0,3 8,87 5,5 (5x),54 0,6-0, metal peg (4x) Ø,6 ± 0,05 Ø 0. SEE DETIL - 6 0,±0,5 Card stop Labelling : Designation & Date-Code area 0 4 6,35±0,3 5,7 ±0,5 F844T xx xx Contacts security (closed position) 3,6±0,3 Card entry 0 6,9 (closed position) 45º metallized holes (4x) Ø,9 Ø 0, 4 Contact foot area 0 0,5,3 RECOMMENDED PC ORD LYOUT (Component side),7 3, 8,87,4 3,95 6,49 9,03 3,57 SW SW C C C3 C ,8 Card end travel switch terminals C5 C6 C7 C8 \Piracy switch \ P P P4 P3 3,8,7 0,7 0 Contact location according to ISO/IEC (6x),3 0,05 P 9,7,45,65,5,5 P 3,4 C5 C6 C7 C8,3 0, 3,8 3,8 Please don't apply any solder paste on these 4 pads 37, P4 P3 (6x),5 0,05 Protection cover terminals 5,5 Plastic outline Card insertion direction (50) F844T xx xx (40,5) (58) Scale 6 Dimensions are shown in mm

14 CCM04 MK4 Series Features ID full size card acceptance Card detection sealed switch Compatible with pick and place and lead free soldering Typical pplications Transaction POS Identification Mechanical Number of contacts 6 or 8 Mechanical life 50,000 cycles Card insertion force 0N max Card extraction force N min / 0N max Contact force 0,4N to 0,7N Card detection switch 0,8 N max for actuation (end travel switch actuation force actuates when card is 0,9mm from card stop),8 N max for complete depression Vibration Frequency 0 to 500 Hz. cceleration 50m/s Duration 6 hours - amplitude 0,35mm Shock Peak value 500 m/s Duration ms 3 shocks in each direction of each axis Max elect. discontinuity µs Contact Electrical Data Insulation resistance 000 MΩ min Contact resistance max 00 mω max Switching current 0 µ min / max Dielectric strength 750 Vrms min Switch Electrical Data Card detection switch Normally open Rc card detection switch 00 mω max Dielectric strength 50 Vrms min Switch current rating m min / 0 m max Maximum switch power 0. V Full Size Packaging See table below Soldering Process Compatible with lead free SMT reflow soldering process Environmental Data Operating temperature Salt mist Damp heat Card detection switch RoHS compliant -40 C to +85 C IEC 5 test number f (96 hours) IEC 5 test number c (0 days) Sealed against dust Designation Housing Type # of Contacts Contact Force Total Height (mm) Total Dim. (mm) Packaging CCM04-547LFT standard 8 0,4N to 0,7N,65 8,75 X 5 reels of,000 pcs CCM LFT standard 8 0,4N to 0,7N 0,90 8,75 X 6,9 reels of,000 pcs CCM LFT stand-off 8 0,4N to 0,7N 3,5 8,75 X 4 reels of,000 pcs CCM LFT standard 8 0,4N to 0,7N 0,90 8,75 X 6,9 reels of,000 pcs CCM LFT standard 8 0,4N to 0,7N 0,90 8,75 X 6,9 reels of,000 pcs 7 Dimensions are shown in mm

15 CCM04 MK4 Series CCM LFT,65±0,05 0,5 ± 0,05 x45 Mated condition 3,8 3,8 0,5 40 0',±0,5 DETIL Scale 0 Full Size (0,75) SEE DETIL 5,5±0,3 9,5±0,3 5,6 0,9-0, 6,6,5 0,85 0,8 (5,5) +0,05,9-0 0,75±0,5 8,55 XXXX 0,7,54,7 0,3 (,97) Card stop 0,9±0,5 7 6,54,±0,05 R0,7 Pick and place area ø 3,3 45 0' 4,4,5 x 45 8x 7,5,75 0,7 x 0,3 7,65 8,75 (,6) 4 3,54 0, ø, Top card level recommended 7,8 5,45,8 RECOMMENDED PC ORD LYOUT (Component side) +0,0 0,75-0,05,3 3, 9,,7,3 0,6 0,75±0,05 0,8 C5 C,54 C6 C,3 (,55),54 C7 C3,54 8x 0, 0, C8 C4 x 3, C SW (4,65) (5) 4 Stand-off area SW Contact foot area 0,8 x 0,7 Plastic outline Pad 3,8 3,8,79 Switch contact foot area 0,85 x 0,7 5,5 9,5 Contact location according to ISO/IEC Dimensions are shown in mm

16 CCM LFT CCM04 MK4 Series - +0,0 0,75-0,04 0,5 ± 0,05 x45 Mated condition 3,8 3,8 40 0' 0,5,±0,5 (0,75) DETIL Scale 0 +0,03 0,5 0 SEE DETIL 8,4±0,3 5,6 +0,03 0,97-0,07,5,5 8,5±0,3,4 0,7 Full Size,54 (,97) 0,9-0, +0,05,9-0 (8,4) 0,75±0,5 8,7,55 R0,7 45 0' 4,4,5 x 45 8x 0,3 7,5 0,3 0,7 7,65 8,75 (,6) 4 3,54,54 0,6,±0,05,8 7,8 5,45 +0,0 0,75-0,05 0,75±0,05 0,8 +0, 4,5 0 +0, 8,95 0 R0,5 max 8x 3x,54 3 XXXX Pick and place area ø 3.3 Card stop 7 0,9±0,5 6 Top card level recommended x RECOMMENDED PC ORD LYOUT (Component side),7 0x C5 C6 C7 C8 +0,,75 0 6,4 8,35 +0, 5,8 0 C C C3 C4,7 0,,3 8x (4) (8,75) 4 R0, min +0, 7,95 0 SW SW (6,9) 3,6 x 45 +0,,4 0, x 9 Dimensions are shown in mm

17 CCM04 MK4 Series CCM LFT Mated condition Full Size SEE DETIL 0,5 ± 0,05 x45 3,8 3,8 5,6 0,9-0, 40 0,5,±0,5 5,5±0,3 9,5±0,3,5 0,85 3,5±0,08 0,8 0,75± ,07-0, DETIL SCLE 0 8,55 R0,7 Pick and place area ø 3,3 XXXX 45 4,4,5 x 45 8x 0,7 0,3 7,5 Card stop 7 0,9±0,5 6 0,7 x 0,3 7,65 8,75 (,6) 4 3,54,54,54 (,97),7,±0,05 Top card level recommended 7,8 5,45,8 +0,0 0,75-0,5 x 0,6 0,75±0,05 0,8 Stand-off area 6x Contact foot area 0,8 x 0,7 RECOMMENDED PC ORD LYOUT (Component side),3 3, 9,,7,3 C5 C (,55),54,7 C6 C,3 (8,75),54,54 C7 C8 C3 C4 8x 0, x (4) 4, 0, 3 SW SW Plastic outline Contact location according to ISO/IEC 786- Pad 3,8 3,8,79 Switch contact foot area 0,85 x 0,7 5,5 9,5 Dimensions are shown in mm 0

18 CCM LFT CCM04 MK4 Series +0,0 0,75-0,04 0,5 ± 0,05 x45 Mated condition 3,8 3,8 40 0,5,±0,5 (0,75) DETIL Scale 0 +0,03 0,5 0 SEE DETIL 8,4±0,3 5,6 0,9-0, +0,03 0,97-0,07,5,5 8,5±0,3,4 (,97) ±0.05 (8,4) 0,75±0,5 Full Size 8,55 XXXX 8x 0,7 0,3 7,5 Card stop 0,9±0, ,75 3,54,54,54,7,±0,05 Top card level recommended R0,7 45 4,4,5 x 45 0,3 0,7 7,65 (,6) 4 0,6,8 x 7,8 5,45 +0,0 0,75-0,05 0,75±0,05 0,8 RECOMMENDED PC ORD LYOUT (Component side) Scale,5.8±0.05 x 45.6±0.05, x SW +0, 8,35 0 3x, ,,75 0,7 0x C8 C7 C6 C5 3.±0.05 6,4 R min +0,,9 0 C4 C3 C C,7 R0,5 max 8x 8,35 SW +0, 7,35 0,3 8x 0, Pick and place area ø 8 max (4) (6,9) (8,75) Dimensions are shown in mm

19 CCM04 MK4 Series CCM LFT +0,0 0,75-0,04 0,5 ± 0,05 x45 Mated condition 3,8 3,8 40 0,5,93 3,05,±0,5 (0,75) Full Size +0,03 0,5 0 SEE DETIL 8,4±0,3 5,6 0,9-0, +0,03 0,97-0,07,5,5 8,5±0,3,4 ±0.05 (8,4) 0,75±0,5 8 (,97),55 R0,7 XXXX 45 4,4,5 x 45 8x 0,7 0,3 7,5 Card stop 7 0,9±0,5 6 0,3 0,7 7,65 8,75 (,6) 4 3,54,54,54,7 0,6,±0.05 Top card level recommended,8 x 7,8 5,45 +0,0 0,75-0,05 0,75±0,05 0,8 RECOMMENDED PC ORD LYOUT (Component side) Scale,5.8±0.05 x 45.6±0.05, x SW +0, 8,35 0 3x, ,,75 0 C8 C7 C6 R min C4 C3 C,7 SW +0, 7,35 0,3 8x Pick and place area ø 8 max (8,75),7 0x C5 3.±0.05 6,4 +0,,9 0 C R0,5 max 8x 8,35 0, (4) (6,9) Dimensions are shown in mm

20

21 CCM03 MK Series Features SIM/SM card acceptance Hinged and fixed covers Compatible with pick and place and lead free soldering Typical pplications Handheld products Identification POS utomotive SIM/SM Mechanical Number of Contacts 6 or 8 Mechanical life, hinged cover 0,000 cycles min Mechanical life, fixed cover 50,000 cycles Card insertion force Hinged cover: N max Fixed cover: 3N max Card extraction force Hinged cover: N max Fixed cover: 0,80N min / 3N max Contact force 0,5N min / 0,50N max Slide locking force N min / 6N max,8n max. for complete depression Vibration Frequency 0 to 500 Hz. cceleration 50m/s Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity µs Shock Soldering Process Compatible with lead free SMT soldering process Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength Peak value 500 m/s Duration ms 3 shocks in each direction of each axis,000 MΩ min 00 mω max 0 µ min / max 750 Vrms min Switch Electrical Data Card detection switch Normally open Contact resistance 00 mω max Dielectric strength 50 Vrms min Current rating m min / 0m max Maximum power 0. V Environment Data Operating temperature -40 C to +85 C Damp heat IEC 5 test number c (0 days) Salt mist IEC 5 test number f (96 hours) RoHS compliant Designation Contact Plating Cover # of Contacts PC Version Card Presence Operating Life Switch Total Height (mm) Dim. (mm) Packaging CCM03-300LFT inlay hinged 6 without 0,000,55 7, x 9,65 reels of,000 pcs CCM03-300LFT inlay hinged 6 plastic pegs without 0,000,55 7, x 9,65 reels of,000 pcs CCM LFT inlay hinged 8 without 0,000,55 7, x 9,65 reels of,000 pcs CCM LFT inlay hinged 8 plastic pegs without 0,000,55 7, x 9,65 reels of,000 pcs CCM LFT gold hinged 6 without 0,000,55 7, x 9,65 reels of,000 pcs CCM03-300LFT gold hinged 6 plastic pegs without 0,000,55 7, x 9,65 reels of,000 pcs CCM03-30LFT gold hinged 8 without 0,000,55 7, x 9,65 reels of,000 pcs CCM03-30LFT gold hinged 8 plastic pegs without 0,000,55 7, x 9,65 reels of,000 pcs CCM03-303LFT gold hinged 6 with 0,000,55 7, x 9,65 reels of,000 pcs CCM03-35LFT gold hinged 6 Large soldering pads* without 0,000,55 7, x 9,65 reels of,000 pcs CCM LFT gold fixed 8 without 50,000,85 7, x 5,5 reels of,000 pcs CCM LFT gold fixed 6 without 50,000,85 7, x 5,5 reels of,000 pcs CCM LFT inlay fixed 6 with 0,000 3,5 6,5 x 8,05 reels of,000 pcs CCM LFT inlay fixed 6 without 0,000 3,45 6,5 x 5,85 reels of,000 pcs CCM LFT inlay none 6 with 0,000,9 6,5 x 5,85 reels of,000 pcs * Can go through reflow upside down 4

22 CCM LFT / CCM LFT CCM03 MK Series 5,5±0, 0,4, 3,5 x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails) 9,65 3,7 0,7 5,3 6x 0,3 8,6 80?max Mated condition 3,83,8 5,4±0, 8,4 0,4 (5) (7,) SEE DETIL,5 (5,5) (9,65) 9,65 5,65±0, 3,8 3,5,45 R,9,5 Slider locked ump DETIL Scale 5 0,65 0,8 0 0, -0, (5,5) SIM/SM Pick and place area ø 3,5,5 7, XX-XXX (5) R,9 3,8 3,8 Date Code area Plastic outline Contact foot area 0,8 x Pad RECOMMENDED PC ORD LYOUT (Component side),5 3,,5 5,5,5 5,5,8,55,7 8,6 x,54 Prohibited area Contact location according to ENV375- & GSM- C5 C6 C7 3,83,8 5,5 9,34 C C C3,3 6x 0, 9 Dimensions are shown in mm

23 CCM03 MK Series CCM LFT / CCM LFT 5,5±0, 0,4, 3,5 SIM/SM,55 (,7 max. includes solder tails) 0,6 5,08 9,65 3,7 Slider locked 0,7 5 0,3 SEE DETIL 9,65 0,6 5,65±0, 3,8 6x 0,3,3,5 3,5,45 R,9,5 x,54 8,6,7 0,7 0,65 ø±0,05 DETIL Scale 5 80 max Mated condition 3,83,8 x ø 0, (5,5) 0,8 0 0, -0, (5,5) 5,4±0, 8,4 MICROSIM CRD 0,4 (9,65) (5) (7,) ump Pick and place area ø 3,5,5 7, XX-XXX (5) R,9 3,8 3,8 Date Code area RECOMMENDED PC ORD LYOUT (Component side) Plastic outline Contact foot area 0,8 x Pad,5 3,,5 0,3 +0, ø, x 0 ø 0, 5,5,5 5,5,8,44 0,6 5,08,7 8,6 Prohibited area Contact location according to ENV375- & GSM- x,54 C5 C6 C7 3,83,8 5,5 6,35 9,34 C C C3,3 6x 0, 30 Dimensions are shown in mm

24 CCM LFT CCM03 MK Series 5,5±0, 0,4, 3,5 3x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails) 9,65 3,7 0,7 5 8x,3 0,3 8,6 80?max Mated condition 3,83,8 5,4±0, 8,4 0,4 (5) (7,) SEE DETIL,5 (5,5) (9,65) 9,65 5,65±0, 3,8 3,5,45 R,9,5 Slider locked DETIL Scale 5 0,65 0,8 0 0, -0, (5,5) SIM/SM ump Pick and place area ø 3,5,5 7, XX-XXX (5) R,9 3,8 3,8 Date Code area Plastic outline Contact foot area 0,8 x Pad RECOMMENDED PC ORD LYOUT (Component side),5 3,,5 5,5,5 5,5,8,55,7 8,6 3x,54 Prohibited area Contact location according to ENV375- & GSM- C5 C6 C7 C8 3,83,8 5,5 9,34 C C C3 C4 8x,3 0, 3 Dimensions are shown in mm

25 CCM03 MK Series CCM LFT 5,5±0, 0,4, 3,5 3x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails) 0,6 5,08 9,65 3,7 0,7 0,6 0,3 5 8x,3 0,3 8,6 80 max Mated condition 3,83,8 5,4±0, 8,4 0,4 (5) (7,) SIM/SM Slider locked ump SEE DETIL 9,65 5,65±0, 3,8,5 3,5,45 R,9,5 0,7 ø±0,05 DETIL Scale 5 0,65 x ø 0, (5,5) 0,8 0 0, -0, (5,5) (9,65) Pick and place area ø3,5,5 7, XX-XXX (5) R,9 3,8 3,8 Date Code area RECOMMENDED PC ORD LYOUT (Component side) Plastic outline Contact foot area 0,8 x Pad,5 3,,5 0,3,44 +0, ø, x 0 ø 0, 5,5,5 5,5,8 0,6 5,08,7 8,6 Prohibited area Contact location according to ENV375- & GSM- 3x,54 C5 C6 C7 C8 3,83,8 5,5 6,35 9,34 C C C3 C4,3 8x 0, 8 Dimensions are shown in mm

26 CCM03-30 LFT CCM03 MK Series 5,5±0, 0,4, 3,5 3x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails) 9,65 3,7 0,7 5 8x,3 0,3 80 max Mated condition 3,83,8 5,4±0, 8,4 0,4 (5) (7,) SEE DETIL,5 (5,5) (9,65) Slider locked ump 9,65 5,65±0, 3,8 3,5,45 R,9,5 DETIL Scale 5 0,65 0,8 0 0, -0, (5,5) SIM/SM Pick and place area ø 3,5,5 7, XX-XXX (5) R,9 3,8 3,8 Date Code area Plastic outline Contact foot area 0,8 x Pad RECOMMENDED PC ORD LYOUT (Component side),5 3,,5,5 5,5 5,5,55,8,7 8,6 3x,54 Prohibited area Contact location according to ENV375- & GSM- C5 C6 C7 C8 3,83,8 5,5 9,34 C C C3 C4 8x,3 0, 9 Dimensions are shown in mm

27 CCM03 MK Series CCM03-30 LFT 5,5±0, 0,4, 3,5 3x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails) 0,6 5,08 9,65 3,7 0,7 0,6 0,3 5 8x,3 0,3 8,6 80 max Mated condition 3,83,8 5,4±0, 8,4 0,4 (5) (7,) SIM/SM SEE DETIL,5 9,65 5,65±0, 3,8 3,5,45 R,9,5 Slider locked 0,7 ø±0,05 DETIL Scale 5 0,65 x ø 0, (5,5) 0,8 0 0, -0, (5,5) (9,65) ump Pick and place area ø 3,5,5 7, XX-XXX (5) R,9 3,8 3,8 Date Code area RECOMMENDED PC ORD LYOUT (Component side) Plastic outline Contact foot area 0,8 x Pad,5 3,,5 0,3,44 +0, ø, x 0 ø0, 5,5,5 5,5,8 0,6 5,08,7 8,6 Prohibited area Contact location according to ENV375- & GSM- 3x,54 C5 C6 C7 C8 3,83,8 5,5 6,35 9,34 C C C3 C4,3 8x 0, 30 Dimensions are shown in mm

28 CCM LFT CCM03 MK Series, 5,5±0, 0,4 3,5,55 (,7 max. includes solder tails) 9,65 3,7 0,7 5 8x,3 0,3 3x,54 8,6,7 80 max Mated condition 3,8 3,8 5,4±0, 8,4 0,4 MICROSIM CRD (5) Slider locked SEE DETIL,5 9,65 5,65±0, 3,8 3,5,45 R,9,5 0,65 DETIL Scale 5 (5,5) 0,8 0 0, -0, (5,5) Plastic actuator DETIL insulated blade switch Scale 5 SIM/SM XX-XXX Pick and place area ø 3,5,5 7, (5) R,9 3,8 3,8 Date Code area Plastic outline Contact foot area 0,8 x Pad,7 8,6 3x,54 Prohibited area Contact location according to ENV375- & GSM- RECOMMENDED PC ORD LYOUT (Component side),5 3,,5,5 5,5 5,5,55 C5 C6 C7 SW 3,83,8 5,5,8 9,34 C C C3 SW 8x,3 0, (9,65) (7,) 3 Dimensions are shown in mm

29 CCM03 MK Series CCM03-35 LFT 6,9±0, x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails) 9,65, 3,5 (0,3) (5) 80 max 0,4 3,7 0,7 5 0' 6x 0,3,3 7,33±0,05 0,85 Mated condition 3,8 3,8 5,4±0, 8,4 (7,) SEE DETIL 9,65,5 DETIL Scale 5 (6,9) (9,65) (9,95) SIM/SM Slider locked 5,65±0, 3,8 3,5,45 R,9,5 0,65,5 (6,9) 0 0, -0, ump Pick and place area ø 3,5,5 7, XX-XXX (5) R,9 3,8 3,8 Date Code area Plastic outline Contact foot area,5 x Pad RECOMMENDED PC ORD LYOUT (Component side),95 3,5,95 5,5,5 5,5,4,8,7 8,6 x,54 Prohibited area Contact location according to ENV375- & GSM- C5 C6 C7 3,8 3,8 6,9 9,34 C C C3,3 6x 0,05 36 Dimensions are shown in mm

30 CCM LFT / CCM LFT CCM03 MK Series 5,5±0,,85 (3 max includes solder tails) 7,±0,05 8,6,7 3x,54 +0, 5, 0 8x 0,8 0,3 30 Pick and place area ø 3,5 0,4, 5,5,9,75,5 0,6,65,54,5±0,05,45 +0,05 ø,4 0,7 Mated condition SEE DETIL 3,8 3,8 0,4 Card stop 0,3±0,0 0, 0 0, -0, DETIL Scale 5 0,5 min 40 (5,5) 0,8 SIM/SM XX-XXX Date Code area,9,3 ø,6 +0,05,4 0 0,75,55 RECOMMENDED PC ORD LYOUT (Component side) Plastic outline Contact foot area 0,8 x Pad,5 3, +0,05 ø,4 0 x 5,5,5 5,5,5,44,54,8 8,6,7 3x,54 Prohibited area Contact location according to ENV375- & GSM- C5 C6 C7 C8 3,8 3,8 5,5 6,35 C C C3 C4 8x,3 0,,7 (3,45) (9,75) (5,5) (7,) 33 Dimensions are shown in mm

31 CCM03 MK Series CCM LFT 0,5± 0,05 x 45 0,±0,05 0,4 - Mated condition 3,8 3,8 6 F SEE DETIL 0 0, -0, DETIL Date code updated (6,5) 0,8 0,8 (9,9) (5,85) 4,5±0, 3,8±0, (4,5) (3,8),8 Pick and place area ø 3,5 5,9,4,4 +0,05,9 0 +0,0 0,85-0,5 6x 0,3 0,6 R SIM/SM 6,5, 0,7,5 8,5 (4,34) Date Code area XXXX 4,9 5, 9, Card stop 0,9±0,5 7 x 0,95±0, 0,3 +0,0 0,75-0,05 6,05 (),54,54,54,54,7,7 3,05 3,5 5,3 RECOMMENDED PC ORD LYOUT (Component side) Plastic outline Contact foot area 0,8 x 0,7 Pad,5,95 3,8,5,5 0,075 8,5 C5 C,54 C6 C,54 C7 C3 0,,54,7 SW 8x,3,54 SW Contact location according to ENV375- & GSM- 5,9 3,8 3,8,65 4,5 3,8 Switch contact foot area 0,8 x 40 Dimensions are shown in mm

32 CCM LFT CCM03 MK Series COUPE - DETIL 0,5 ± 0,05 x 45 0,±0,05 0,4 Mated condition 3,8 3,8 SEE DETIL (6,5) (9,9),8 5,9,4 0,75 0,3 R (4,34) 0 0, -0, 0,8 (5,85) 4,5±0, (4,5) Pick and place area ø 3,5,4 +0,05,9 0 0,6 6,5,,5 0,7 6x 8,5 XXXX Card stop 6,05 (7,08),54,54,7,7 5,3 SIM/SM Date Code area 4,9 5, 9, +0,0 0,75-0,05 3,05 RECOMMENDED PC ORD LYOUT (Component side) Plastic outline Contact foot area 0,8 x 0,7 Pad,5,95,5 0,075 8,5 C5 C,7,54 C6 C,3,54 C7 C3 6x 0, Contact location according to ENV375- & GSM- 5,9 3,8 3,8,65 4,5 4 Dimensions are shown in mm

33 CCM LFT 0,5 ± 0,05 x 45 3,8 3,8 (6,5) (9,9),8 5,9 0,75 0,3 (4,34) 0 0, -0, CCM03 MK Series Mated condition 6 F SEE DETIL 4,5±0, 3,8±0, (4,5) 0,8 (3,8) 0,8 (5,85) +0,05,9 0 Pick and place area ø 3,5 0,6 SIM/SM 6,5, 6x 0,7,5 XXXX Card stop 0,9 ±0,5 7 0,95±0, 0,3 6,05 8,5,54,54,54,54,7,7 +0, 0,95 0 Top card level recommended 5,3 Date Code area 4,9 5, 9, x +0,0 0,75-0,05 (),9 Plastic outline Contact foot area 0,8 x 0,7 Pad RECOMMENDED PC ORD LYOUT (Component side),5,95 3,8,5,5 0,075 8,5 C5 C,54 C6 C,54 C7 C3 0,,54,54,7 SW SW 8x,3 3,8 3,8,65 Switch contact foot area 0,8 x Contact location according to ENV375- & GSM- 5,9 4,5 3,8 4 Dimensions are shown in mm

34 CCM04 MK3 Series Features SIM and SM card acceptance Compatible with pick and place and lead free soldering Typical pplications Mobile POS Identification GPS Mechanical Number of contacts 6 or 8 Mechanical life 30,000 cycles Card insertion force 0N max Card extraction force N min / 0N max Contact force 0,35N min to 0,65N Vibration Frequency 0 to 500 Hz. cceleration 50m/s Duration 6 hours - amplitude 0,35mm Shock Peak value 500 m/s Duration ms 3 shocks in each direction of each axis Max elect. discontinuity µs Packaging See table below Contact Electrical Data Insulation resistance 000 MΩ min Contact resistance max 00 mω max Switching current 0 µ min / max Dielectric strength 750 Vrms min Environmental Data Operating temperature -40 C to +85 C Salt mist IEC 5 test number f (96 hours) Damp heat IEC 5 test number c (0 days) RoHS compliant Soldering Process Compatible with lead free SMT soldering process SIM/SM Designation # of Contacts Contact Plating PC Version Height (mm) Dim. (mm) Packaging CCM04-537LFS 6 gold SMT IN,9 8,5 X 0,45 reels of,900 pcs 43 Dimensions are shown in mm

35 CCM LFS,8 (,7) 7,6 (7,6) (,7),54 0,7 CCM04 MK3 Series 0,75 +0,05,9 0,54 0,3 (,8) 6x SEE DETIL Mated condition 3,8 3,8 0,5 ± 0,05 x 45 Z DETIL Scale 0 0,45±0, 0 0, -0, SIM/SM Date Code area XX,54 0,6 (0,45) XXX,54 Pick and place area ø 3,3 R0,5 Plastic outline Contact foot area 0,6 x 0,7 Pad RECOMMENDED PC ORD LYOUT (Component side),5 8,5,5 C5 C,54 C6 C,54 C7 C3 6x 0, Contact location according to ISO 786- & ENV 375- & GSM- 3,8 3,8 0,65 0,45 Dimensions are shown in mm 46

36 Product Selection Guide Surface Mount Series KXT KMT KMT0 KMR-4 KMS PTS55 PTS530 Size on PC L x W (mm) Total Height (mm) x 3 0,58 3 x,6 0,65 3 x,6 0,65 4, x,8 4, x 3,55 5, x 5,,9,5,4 0,8 and,5 4,5 x 4,5 0,55 and 0,65 Travel (mm) ctuation Force (N) Contact Type Max. Voltage (V) 0,3 00 gf 80gf 40 gf Silver 0,5,0,6 0,5,0;,6,3; 3,4 0, to 0,35 0,5 to 0,3 0,3,;,0 3,0; 4,0,0 3,0,6,6 Silver Silver Silver / Gold Silver / Gold Silver ,,0;,6;,0;,6; 4,0; 6,0 Silver Max. Switching Power (V) 0,5 0,5 0,5 / 0, / 0, _ Life Cycles 300,000 50, ,000/600,000,000,000 00, ,000 00,000 00,000 50,000 to,000,000 IP Rating IP64 IP54 IP68 IP40 IP40 IP40 - Page Number / Surface Mount Series PTS540 PTS80 PTS80 PTS840 KSR KSS KSC4V Size on PC L x W (mm) Total Height (mm) 3,7 x 3,7 0,55 / 0,65 4, x 3,,5 3,9 x,9,5/,0/,5 3,5 x 3,55,35 7,5 x 3,8 7,3 x 3,8,5 5,5 x 4,4,7 holes ø, pads,5 x 0,8 5,0* Travel (mm) 0,5 0,5/0, 0, 0, 0,3 to 0,5 0,3 0,7* ctuation Force (N) 60 gf 30 gf,6;,6; 4,0; 6,0,6,5,6,,;,0; 3,0; 4,5, * Contact Type Silver Silver Silver Silver Silver / Gold Silver / Gold Silver / Gold Max. Voltage (V) Max. Switching Power (V) - - / 0, / 0, / 0, Life Cycles 300, ,000 50,000 to 50,000 00,000 00,000 00,000 00,000 00,000 00, ,000 IP Rating IP40 IP40 IP40 IP40 IP50 IP40 IP67 Page Number * Other options available by request Dimensions are shown: mm

37 Product Selection Guide SMT, Thru-hole Sealed High Performance Series KSC - 0 KSE KT K5T K8 J G Footprint S S G G 6,8 x 6, 6,8 x 6, 0 x 6, 7,5x5 7,5x7 8,4 x 0,8 8,4 x 0,8 Total Height (mm) 3, / 4,3 6,6 7, with tab 6, 6 Travel (mm) 0,0 to 0,75 * 0,3 0,3 to 0,5 0,5 0,45 ctuation Force (N), to 5,5 * Contact Type Silver / Gold Silver Silver / Gold Gold Silver / Gold Max. Voltage (V) Max. Switching Power (V) / 0. / 0. / 0. Life Cycles 00,000 to,000, ,000 00,000 5, ,000 IP Rating IP67 IP67 IP40 IP40 Page Number Thru-hole Series K5V KSF/KSI KS KS MKII KS-V KSL KSL-V Footprint 8 x 9 x 7 / 9 x 3 7,6 x 5,08 7,6 x 5,08 7,6 x 5,08 7,6 x,54 7,6 x 5,08 7,6 x,54 Total Height (mm) 9 / 3,6 4,7 button option 4,7 8 9,9 8 Travel (mm), 0,3 to 0,5 0,3 to 0,5 0,3 to 0,5 0,3 to 0,5 0,3 to 0,5 0,3 to 0,5 ctuation Force (N) ,3 3,0,3 3,0 Contact Type Gold Silver / Gold Silver / Gold Silver / Gold Silver / Gold Silver / Gold Silver / Gold Max. Voltage (V) Max. Switching Power (V) / 0. / 0. / 0. / 0. / 0. / 0. Life Cycles IP Rating 5,000 IP40 00,000 IP60 00,000 IP60 00,000,000,000 IP67 00,000 IP60 00,000 IP60 00,000 IP60 Page Number * Other options available by request 3 Dimensions are shown: mm

38 Product Selection Guide Thru-hole Series KSJ KSJ-V PTS635 PTS635-V PTS64 PTS645 Footprint 7,6 x 5,08 7,6 x,54 6 x 3,5 7,0 x,5 6,3 x 6,4 6 x 6 Total Height (mm) Travel (mm) ctuation Force (N) Contact Type Max. Voltage (V) 6,65 0,55 to 0,7,0 3,0 0,55 to 0,7,0 3,0 Silver Gold Silver Gold ,5 4,3 5,0 0,5,3,0,6 Silver 4,3 0,5,3,0 Silver,5 3, 3,4 0,0 / 0,30 60 gf 50 gf 30 gf Silver 4,3; 5,0; 7,0; 9,5; 0,5,3;,6,0;,6 Silver Life Cycles 00,000 30,000 00,000 30,000 0,000 0,000 00,000 00,000 IP Rating IP60 IP60 IP40 IP40 IP40 IP40 Page Number Thru-hole Series PTS645-V PTS5 ITS KSH Footprint Total Height (mm) 7,0 x,5 7, x 4,3 7,3 Sq. 8,5,0 variety of sizes available 6,3 x 6,3 5,0 Travel (mm) 0,5 0,30 0,5,3 ctuation Force (N),3;,6,0;,6,6,6 60 gf,6;,0;,5 3,0; 3,5 Contact Type Silver Silver Silver Silver Max. Voltage (V) Life Cycles 00,000 00,000 50,000 00,000 IP Rating IP40 IP40 IP40 IP40 Page Number Dimensions are shown: mm 4

39 Features 3.0 x.0 mm footprint 0.58 mm thickness High number of cycle Typical pplications Wearable electronics In-Ear headphones, Earbuds Mobile Phones Portable Electronics Hearing ids KXT Series Ultra Low Profile Top ctuated Specification FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: G type for SMT TRVEL: 0.3 mm ± 0.05 mm Mechanical Operating force Operating gf Life KXT LHS 00 ± ,000 KXT LHS 80 ± ,000 KXT 3 LHS 40 ± ,000 Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: VDC 50 m 00 V C (mn) 500 mω 00 MΩ 0 ms Environmental OPERTING TEMPERTURE: -30 C to 85 C STORGE TEMPERTURE: -40 C to 90 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 7,000 pieces Dimensions of reels according to EI 48 External diameter 330 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Part Number Description For any part number different from those listed above, please consult your local representative. K X T L H S Total Height 0.58mm ctuation Force 00 gf 80 gf 3 40 gf Contact Material Silver LHS Lead free, RoHS, Halogen Free, Silver plated 5 Dimensions are shown: mm

40 KXT Series Ultra Low Profile Top ctuated SCHEMTIC ± 0, 0,58 ±0,,3 ± 0, 0.38 ± 0. 0,35 ±0, Ø0,65 ±0, 0,04 ±0,0,5 3,8,6 3 ± 0, RECOMMENDED PC LYOUT 3,5 ± 0, Cover tape (Polyester) Carrier tape (Polystyrene) Reel (Polystyrene) () Ø,5 +0, 0 4,75 Ø 330 9,3 Cover tape 5,5 ` 0,3 4 ` 0,5 Ø,6` 0,8 Ø 3,8` 0,5 (/) 6 Dimensions are shown: mm

41 Features Smallest footprint High number of cycles within the smallest packaging Smallest thickness with integrated actuator Ground pin option Halogen free KMT Series Nano-Miniature SMT Top ctuated Typical pplications Mobile Phones Hearing ids MP3 accessories luetooth Headset Specification FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: Gullwing type for SMT Mechanical Operating force Operating Tactile Type G and NG Newtons (grams) Life Feeling Travel mm KMT HF LFS.0 (00) ± ,000 0% 0.5 ± 0. KMT HF LFS.6 (60) ± ,000 30% 0.5 ± 0. Electrical MXIMUM POWER: MXIMUM VOLTGE: MINIMUM VOLTGE: MXIMUM CURRENT DC: MINIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: Silver 0.5 V 3 VDC 0 mv 50 m m 50 Vrms (mn) 50 mω 50 MΩ 6 ms Environmental OPERTING TEMPERTURE: STORGE TEMPERTURE: Silver -40 C to 85 C -55 C (0 days) +85 C (4 days) Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 4,000 pieces. Dimensions of reels according to EI 48 External diameter 80 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Part Number Description For any part number different from those listed above, please consult your local representative. K M T HF L F Total Height 0.65 mm ctuation Force.0 N (00 grams).6 N (60 grams) Grounding Option G Ground Pin NG No Ground Pin Contact Material Silver 3 Gold - please contact Customer Service Type HF Halogen Free LFS RoHS, silver plated LFG RoHS, gold plated - please contact Customer Service Dimensions are shown: mm (inches) 7

42 KMT Series Nano-Miniature SMT Top ctuated KMT Series No Ground Pin ELECTRICL DIGRM RECOMMENDED LYOUT,,6,4,4 3,4 ± 0, 0,06 3,6 (0,05) 0,46 0,65 ± 0, KMT Series With Ground Pin ø,,3 3,6 ELECTRICL DIGRM RECOMMENDED LYOUT TPE & REEL 0,95 ±0, 0,5 ±0,05 DE-REELING DIRECTION OUT OF THE TPE SECTION - Draft 5 max,75 ±0, ±0,05 4±0,05 ø,5 +0, 0,3 ±0, ø±0, 4±0, 3,6 ±0, 4±0, +0,3-0, 5,5 ±0,05,4,4 0,6,,6 3,4 ± 0, 0,46 0,65 ± 0, ø,,3 3,6 0, 0,06 3 0,0 ±0,05 (0,05) 0,4,6 0,4 R0,5 Draft 5 max,7 ±0,,8 ±0, Dimensions are shown: mm 8

43 Features Smallest footprint Smallest thickness with integrated actuator Extended life cycles IP68 Ultra low current capabilities Specification FUNCTION: momentary action, normally open CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: J lead type for SMT Mechanical TRVEL (mm): 0.5 ± 0. Operating force Tactile Operating Newtons (grams) Feeling Life KMT0NGJLHS.0 (00) ± 5% 0% 300,000 KMT0NGJLHS.6 (60) ± 5% 30% 300,000 KMT07NGJLHS.3 (30) ± 5% 30% 300,000 KMT03NGJLHS 3.4 (340) ± 5% 30% 300,000 Operating force Tactile Operating Newtons (grams) Feeling Life KMT0NGJLHS.0 (00) ± 5% 0%,000,000 KMT0NGJLHS.6 (60) ± 5% 30% 600,000 KMT07NGJLHS.3 (30) ± 5% 30% 600,000 KMT0 Series Nano-Miniature SMT Top ctuated Typical pplications Mobile Phones Hearing ids MP3 accessories luetooth Headset utomotive keyless entry system Smoke and CO detectors E-readers Home automation remote controls Electrical MXIMUM POWER: MXIMUM VOLTGE: MINIMUM VOLTGE: MXIMUM CURRENT DC: MINIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: 0.5 V 3 VDC 0 mv 50 m m 50 Vrms (mn) 50 mω 50 MΩ 6 ms Environmental OPERTING TEMPERTURE: -40 C to 85 C STORGE TEMPERTURE: -55 C (0 days) +85 C (4 days) Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 5,000 pieces. Dimensions of reels according to EI 48 External diameter 80 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Part Number Description For any part number different from those listed above, please consult your local representative. K M T 0 N G J L H S Total Height mm ctuation Force.0 N (00 grams).6 N (60 grams) 7.3 N (30 grams) N (340 grams) Contact Material Silver Silver long life Grounding Option NGJ No Ground Pin, J leads LHS Lead free, RoHS, Halogen free, Silver plated Dimensions are shown: mm 9

44 KMT0 Series Nano-Miniature SMT Top ctuated Minimum actuator diameter is.0 mm. It is recommended to enlarge this diameter to a full flat surface covering the switch. ø mini,6 RECOMMENDED LYOUT ELECTRICL DIGRM 0,3 0,06 3,4±0, 3 H ( 0,05 ),4,4,3 3,6,,6 TPE & REEL DE-REELING DIRECTION 0,75±0, 0,5±0, OUT OF THE TPE ±0,05 4±0,05 +0, ø,5 0 ø ±0,,4 3,6±0, +0,3-0, 5,5±0,05,75±0, 3,±0,,8±0,05 0 Dimensions are shown: mm

45 KMR Series Microminiature SMT Top ctuated Features/enefits Small footprint 4 actuation forces Excellent tactile feel Ultra low current capabilities IP40 Typical pplications utomotive Industrial electronics Medical equipment Specification FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: Gullwing type for SMT Mechanical Type G and NG See description below Operating force N (grs) Operating life (cycles) Travel (mm) KMR LFS. (0) ± , mm ± 0. KMR ULC LFS. (0) ± , mm ± 0. KMR3 LFG. (0) ± , mm ± 0. KMR3 ULC LFG. (0) ± , mm ± 0. KMR LFS.0 (00) ± , mm ± 0. KMR ULC LFS.0 (00) ± , mm ± 0. KMR3 LFG.0 (00) ± , mm ± 0. KMR3 ULC LFG.0 (00) ± , mm ± 0. KMR3 LFS 3.0 (300) ± , mm ± 0. KMR3 ULC LFS 3.0 (300) ± , mm ± 0. KMR3 LFS 3.0 (300) ± , mm ± 0. KMR3 ULC LFS 3.0 (300) ± , mm ± 0. KMR33 LFG 3.0 (300) ± , mm ± 0. KMR33 ULC LFG 3.0 (300) ± , mm ± 0. KMR4 LFS 4.0 (400) ±.00 00, mm ± 0. KMR4 ULC LFS 4.0 (400) ±.00 00, mm ± 0. KMR4 LFS 4.0 (400) ±.00 00, mm ± 0. KMR4 ULC LFS 4.0 (400) ±.00 00, mm ± 0. KMR43 LFG 4.0 (400) ±.00 00, mm ± 0. KMR43 ULC LFG 4.0 (400) ±.00 00, mm ± 0. Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mvdc 0 mvdc MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m* m* DIELECTRIC STRENGTH: 50 Vrms CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: GΩ OUNCE TIME: 3 ms *For ULC version minimum current is µ at.8 VDC Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Process Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 7,000 pieces External diameter 330 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TCTILE FEELING: KMR series with actuation force in N - 3N - 4N: 30% KMR series with actuation force in.n: 0% Part Number Description For any part number different from those listed above, please consult your local representative. K M R Total height,9 mm LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated ctuation Force. N (0 grams) N (00 grams) 3 3 N (300 grams) 4 4 N (400 grams) Contact Material Silver Silver long life* 3 Gold Grounding option G Ground pin NG No Ground pin Low Current capability Void Under standard specification ULC Low current * Silver long life is available in 3N and 4N actuation force. For other versions, please contact Customer Service. 8 jun 6 Dimensions are shown: mm

46 KMR Series Microminiature Tact Switch for SMT, 3,,7,6, 0,6,6 KMR Series -.9 mm height PC layout shown with ground pin option,4,9 4,6 4,,8,45 0,55 0,6 0,6 5 TPE & REEL DE-REELING DIRECTION OUT OF THE TPE SECTION max,3 ± 0,,75 4 ± 0, ± 0,05 ø,5 ± 0, +0,3-0, 5,5 ± 0,05 4,95 ± 0, 0,9 ± 0,0 6 0 max GROUND TERMINL ø,5 +0,5 0 3,03 ± 0, DIRECTION OF FEED 8 jun 6 Dimensions are shown: mm

47 KMR 4 Series Microminiature SMT Top ctuated Features/enefits Small footprint 4 actuation forces Excellent tactile feel Ultra low current capabilities IP40 Typical pplications utomotive Industrial electronics Medical equipment Specification FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: Gullwing type for SMT Mechanical Type G and NG See description below Operating force N (grs) Operating life (cycles) Travel (mm) KMR4 LFS. (0) ± , mm ± 0. KMR4 ULC LFS. (0) ± , mm ± 0. KMR43 LFG. (0) ± , mm ± 0. KMR43 ULC LFG. (0) ± , mm ± 0. KMR4 LFS.0 (00) ± , mm ± 0. KMR4 ULC LFS.0 (00) ± , mm ± 0. KMR43 LFG.0 (00) ± , mm ± 0. KMR43 ULC LFG.0 (00) ± , mm ± 0. KMR43 LFS 3.0 (300) ± , mm ± 0. KMR43 ULC LFS 3.0 (300) ± , mm ± 0. KMR43 LFS 3.0 (300) ± , mm ± 0. KMR43ULC LFS 3.0 (300) ± , mm ± 0. KMR433 LFG 3.0 (300) ± , mm ± 0. KMR433ULC LFG 3.0 (300) ± , mm ± 0. KMR44 LFS 4.0 (400) ±.00 00, mm ± 0. KMR44 ULC LFS 4.0 (400) ±.00 00, mm ± 0. KMR44 LFS 4.0 (400) ±.00 00, mm ± 0. KMR44 ULC LFS 4.0 (400) ±.00 00, mm ± 0. KMR443 LFG 4.0 (400) ±.00 00, mm ± 0. KMR443 ULC LFG 4.0 (400) ±.00 00, mm ± 0. Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mvdc 0 mvdc MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m* m* DIELECTRIC STRENGTH: 50 Vrms CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: GΩ OUNCE TIME: 3 ms *For ULC version minimum current is µ at.8 VDC Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Process Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 6,000 pieces External diameter 330 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TCTILE FEELING: KMR 4 series with actuation force in N - 3N - 4N: 5% KMR 4 series with actuation force in.n: 0% Part Number Description For any part number different from those listed above, please consult your local representative. K M R 4 Total height 4,5 mm LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated ctuation Force. N (0 grams) N (00 grams) 3 3 N (300 grams) 4 4 N (400 grams) Contact Material Silver Silver long life* 3 Gold Grounding option G Ground pin NG No Ground pin Low Current capability Void Under standard specification ULC Low current * Silver long life is available in 3N and 4N actuation force. For other versions, please contact Customer Service. 8 jun 6 3 Dimensions are shown: mm

48 , 3,,7,45 0,55 0,6,6 KMR 4 Series Microminiature Tact Switch for SMT KMR 4 Series -.5 mm height PC layout shown with ground pin option,8 0,6 0,6,5 4,6 4,,4,6, 5 TPE & REEL DE-REELING DIRECTION OUT OF THE TPE SECTION max,75 ± 0,,75 4 ± 0, ± 0,05 ø,5 ± 0, +0,3-0, 5,5 ± 0,05 4,95 ± 0, 0,9 ± 0,0 6 0 max GROUND TERMINL 3,03 ± 0, 8 jun 6 4 Dimensions are shown: mm

49 Features/enefits Compact size Excellent tactile feel ESD protection Positioning pegs for stability RoHS compliant and compatible KMS Series Microminiature SMT Side ctuated Typical pplications Mobile phones Medical handheld monitors Consumer electronics Telecommunication networks Specification FUNCTION: Momentary CONTCT RRNGEMENT: SPST, N.O. TERMINLS: Gullwing type for SMT IP40 Sealed Mechanical OVERLOD: 0N TCTILE FEELING: 5% min. for the N version 5% min for the.5n version Operating force Operating life Type Newtons (grams) (operations) Travel KMSG/GP N (00) ± K cycles 0,5 ± 0,5 KMS3G/GP N (00) ± K cycles 0,5 ± 0,5 KMS3G/GP 3N (300) ± K cycles 0,3 ± 0,5 KMS33G/GP 3N (300) ± K cycles 0,3 ± 0,5 Packaging Tape and reels in reels of 3,000 pieces. External diameter 330mm ± mm. Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MXIMUM CURRENT DC: 50 m 0 m MINIMUM CURRENT DC: m m DIELECTRIC STRENGTH: 50 VDC CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: 0 9 Ω OUNCE TIME: 3 ms Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Note: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Process Infared reflow soldering in accordance with IEC How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. K M S G ctuator Standard ctuation Force N (00 grams) 3 3 N (300 grams) Termination G Gullwing Contact Material Silver 3 Gold Pegs NONE No pegs P With pegs RoHS compliant and compatible LFS Lead free silver LFG Lead free gold 5 Dimensions are shown: mm

50 KMS Series Microminiature SMT Side ctuated KMS KMS WITH PEGS,,4 4,6 4, 3,8 4,6 4,,45 0,55 3,55,5,5 5 3,,7,8 0,6,6, 0,6 0,6 Electrical Diagram 3 4,45 0,55 0,55 3,55,,8,4 ø 0,75 0, 45,5 5 3,,7 0,6, 0,6 0,6,35 0,75 0,85 5 ø 0,9 mini,95,6 0,85 0,5 3,8,95 Electrical Diagram TPE & REEL,67 ± 0,,75 8 ± 0, ± 0,05 ø,5 ± 0, 4,65 ± 0, +0,3-0, 5,5 ± 0,05 R 0,5 3 ± 0, 4,95 ± 0, 0,9 ± 0,0 7 0 max 3,5 ± 0, 4 ± 0, ø,5 +0,5 0 WITH PEGS,67 ± 0, 8 ± 0, ± 0,05 ø,5 ± 0,,75 4,65± 0, 3 +0,3-0, 5,5 ± 0,05 R0,8 R 0,8 3 (x) 4,95 ± 0, 0,9 ± 0,0 7 0 max 4 ± 0, ø,5 +0,5 0 DIRECTION OF FEED 6 Dimensions are shown: mm

51 PTS 55 Series Microminiature Tact Switch for SMT Features/enefits 0.8 &.5 mm actuator height Ruggedized package in a compact size High number of cycles Typical pplications Consumer products Instrumentation Remote controls Specification FUNCTION: Momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: Environmental OPERTING TEMPERTURE: 5 VDC 0 m 50 V C (mn) 00 mω 00 MΩ 0 ms -0 C to 70 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging Switches in reels of: 5,000 pieces in 0.8 mm height 4,000 pieces in.5 mm height Dimensions of reels according to EI 48 External diameter 330 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Please see chart below for full part numbers. Part Number Height (mm) Leads Shape Ground Pin Force Travel (mm) Operating Life PTS55 SM08 SMTR LFS 0.8 G No 60 gf ± 50 gf 0.5 ± 0.,000,000 PTS55 SK08 SMTR LFS 0.8 G No 60 gf ± 50 gf 0.5 ± 0. 00,000 PTS55 SM5 SMTR LFS.5 G No 60 gf ± 50 gf 0.5 ± 0.,000,000 PTS55 SK5 SMTR LFS.5 G No 60 gf ± 50 gf 0.5 ± ,000 PTS55 SMG5 SMTR LFS.5 G Yes 60 gf ± 50 gf 0.5 ± 0.,000,000 PTS55 SKG5 SMTR LFS.5 G Yes 60 gf ± 50 gf 0.5 ± ,000 PTS55 SMG5J SMTR LFS.5 J Yes 60 gf ± 50 gf 0.5 ± 0.,000,000 PTS55 SKG5J SMTR LFS.5 J Yes 60 gf ± 50 gf 0.5 ± ,000 7 Dimensions are shown: mm

52 PTS 55 Series Microminiature Tact Switch for SMT PTS55 SM08 SMTR LFS PTS55 SK08 SMTR LFS 0,08 Max 5,8 6,4 3 4 SCHEMTIC DI. 3 5,,8 0, 8 4,8 PTS55 SM5 SMTR LFS PTS55 SK5 SMTR LFS,6 3 0,5 Ø 4 3,7 ± 0,,5 +0, 0 5, 5 0,85 4,8,8 3 4 RECOMMENDED PC LYOUT 6,4 3 4 SCHEMTIC 8 0,5 4,8 5,, ,7± 0,05 4,8,8,6 5, 3 4 RECOMMENDED PC LYOUT PTS55 SMG5 SMTR LFS PTS55 SKG5 SMTR LFS 5,8 Ø 6 5,,6 0,8 (5,4) 6,4 5,,6 0,8,,5 SCHEMTIC 8 5,8 4, ,5 3,7` 0, 3 4 SEE DETIL 4,9 0, 5 0,05 DETIL SCLE 0 4,8,8 Prohibited area for run ,6 4,7 5,4,6 3 4 RECOMMENDED PC LYOUT 8 Dimensions are shown: mm

53 PTS 55 Series Microminiature Tact Switch for SMT PTS55 SMG5J SMTR LFS PTS55 SKG5J SMTR LFS Ø 6 0,8,,5` 0, SCHEMTIC 0,5 3 5, 4, ,7 4,9 5, 4,4 3 5,4 3, ,7 4,6 5,6 RECOMMENDED PC LYOUT TPE & REEL 0.8 mm height 5,000 pieces per reel Cover tape (Polyester) Reel (Polystyrene) Carrier tape (Polystyrene) 4 n,5 Cover tape 5,5 ` 0,3,75 4 Max CRRIER TPE 8 NOTE: n 330 n 3` 0,5 ` 0,5 n ` 0,8 SEE DETIL REEL DETIL SCLE 0,5 Dimensions are shown: mm 9

54 PTS 55 Series Microminiature Tact Switch for SMT TPE & REEL.5 mm height 4,000 pieces per reel Cover tape (Polyester) Reel (Polystyrene) n,5 4 Carrier tape (Polystyrene) Cover tape,75 5,5 ` 0,3 4 Max n 330 CRRIER TPE 8 n 3` 0,5 ` 0,5 n ` 0,8 SEE DETIL REEL DETIL SCLE 0,5 0 Dimensions are shown: mm

55 PTS 530 Series Ultra Low Profile SMT Top ctuated Features/enefits 4.5 x 4.5 mm footprint 0.55 mm thickness High number of cycles Symbol line identification Typical pplications MP3 accessories luetooth headset Remote controls Garage door opener Specifications FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST N.O. TERMINLS: Gullwing for SMT TRVEL: 0.mm - 0. /+ 0.5mm Operating Operating Life Part Number Force (gf) (operations) PTS530 GN055 SMTR LFS 00 ± 30,000,000 PTS530 GM055 SMTR LFS 60 ± 30,000,000 PTS530 GH055 SMTR LFS 00 ± 30 00,000 PTS530 GK055 SMTR LFS 60 ± 30 00,000 PTS530 GG065 SMTR LFS 400 ± ,000 PTS530 GS065 SMTR LFS /+00 50,000 Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: Environmental OPERTING TEMPERTURE: VDC 50 m 50 V C (mn) 00 mω 00 MΩ 0 ms -40 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging Switches in reels of 7,000 pieces. Dimensions of reels according to EI 48 External diameter 330 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S G S M T R L F S Termination G Gullwing Packaging SMTR Tape & reel LFS RoHS, silver plated ctuation Force N 00 gf M 60 gf H 00 gf K 60 gf G 400 gf S 600 gf ody Type mm height for 00, 60, 00 and 60 gf mm height for 400 and 600 gf Dimensions are shown: mm

56 PTS 530 Series Ultra Low Profile SMT Top ctuated TERMINTION G GULLWING 4, ,55 MM HEIGHT ODY TYPE / CTUTION FORCE ctuation force identification lines: 3 4,5 +0,0-0,5 4, 4 4x0,5 3,5 4,5+0,5-0,5 0,55±0,5 3,3,4 3 4 SCHEMTIC 4,85,85,8 4, N: 00 gf M: 60 gf No Lines H: 00 gf 065 0,65 MM HEIGHT 3 4 LTERNTIVE PC LYOUT PRT NUMER PTS 530 GS 065 SMTR LFS 0.7 PTS 530 GG 065 SMTR LFS 0.68 H 4,65 HEIGHT , 3 4,85 4,85 RECOMMENDED PC LYOUT K: 60 gf -0,5 4,5 +0,5 4, 4x05, 4,5 3,5 +0,0 (3,3) 0,65-0,05 () 4) (, Restriction in operation 0 ± 0, ø 90 ± 3 R G: 400 gf No Lines S: 600 gf 3 4 Force symbol lines for 600 gf No symbol line for 400 gf TPE & REEL 8,4 Max, ± 0,5,5 4,75 ±0,5 tape 9,3 Cover 5,5 ±0,3 ± 0,8 CRRIER TPE 8 SEE DETIL REEL DETIL SCLE 0,5 Dimensions are shown: mm

57 PTS 540 Series Ultra Low Profile SMT Top ctuated Features/enefits 3.7 x 3.7 mm footprint 0.35 mm thickness High number of cycles Typical pplications MP3 accessories luetooth headset Remote controls Specifications FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST N.O. TERMINLS: J type for SMT TRVEL: 0.5 mm ± 0. mm Mechanical Operating Operating Life Part Number Force (gf) (operations) PTS540 JM035 SMTR LFS 60 ± ,000 PTS540 JK035 SMTR LFS 30 ± ,000 Packaging Switches in reels of 0,000 pieces. Dimensions of reels according to EI 48 External diameter 330 mm Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: Environmental OPERTING TEMPERTURE: VDC 50 m 50 V C (mn) 00 mω 00 MΩ 0 ms -30 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S J S M T R L F S Termination J J bend Packaging SMTR Tape & reel LFS RoHS, silver plated ctuation Force M 60 gf black casing K 30 gf gray casing ody Type mm height 3 Dimensions are shown: mm

58 PTS 540 Series Ultra Low Profile SMT Top ctuated PTS 540 3,7 ±0, 3,05 0,35 ±0,5, 3,7 ±0, 3,5 ± 0,,35 ± 0, 3 RECOMMENDED PC 3 4,5 3,7, 4 3,4 Ø 0,7 Recommended operating area by set knob,8 3 4 SCHEMTIC Cover tape (Polyester) Carrier tape (Polystyrene) 9,3 Cover tape (0,8) Reel (Polystyrene) n,5 +0, 0 4 5,5,75 ± 0, CRRIER TPE 8 n 330 n 3,8 ± 0,5 ± 0,5 n,6 ±0,8 DETIL REEL DETIL SCLE 0,5 Dimensions are shown: mm 4

59 PTS 80 Series Microminiature SMT Top ctuated Features/enefits 4. x 3. mm footprint.5 mm thickness High number of cycles Color coded actuators Typical pplications Control panels Nomad devices Remote controls Keyless entry system Specifications FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST N.O. TERMINLS: J type for SMT TRVEL: 60 & 60 gf: 0.5mm ± 0.mm 400 & 600 gf: 0.0mm ± 0.mm Operating Operating Life Force (gf) (operations) PTS80 SJM 50 SMTR LFS 60 ± 50 50,000 PTS80 SJK 50 SMTR LFS 60 ± 70 50,000 PTS80 SJG 50 SMTR LFS 400 ± 00 00,000 PTS80 SJS 50 SMTR LFS 600 ± 50 50,000 Packaging Switches in reels of,900 pieces. Dimensions of reels according to EI 48 External diameter 330 mm Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: Environmental OPERTING TEMPERTURE: 6 VDC 50 m 50 V C (mn) 500 mω 00 MΩ 0 ms -40 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 0 S J 5 0 S M T R L F S ctuator Type S Standard Termination J J bend SMT Packaging SMTR Tape & reel LFS RoHS, silver plated ctuation Force M 60 gf; gray actuator K 60 gf; white actuator G 400 gf; blue actuator S 600 gf; gray actuator Height 50.5 mm height 5 Dimensions are shown: mm

60 PTS 80 Series Microminiature SMT Top ctuated PTS80 3 SCHEMTIC 0,5±0,,6, ,6±0, 4, 3 4,6,7 3,,8±0,, RECOMMENDED PC LYOUT 3 4 3, 5,,5,8 TPE & REEL tape 9,3 Cover,5 4 5,6,7 5 ±0,3 8 8,4 Max,4 + 0 CRRIER TPE 330 3± 0,5 ±0,5 ± 0,8 SEE DETIL REEL DETIL SCLE 0,5 6 Dimensions are shown: mm

61 PTS 80 Series Microminiature SMT Top ctuated Features/enefits 3.9 x.9 mm footprint Three different heights High number of cycles Reduced footprint Typical pplications Control panels Nomad devices Remote controls Keyless entry system Specifications FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST N.O. TERMINLS: J type for SMT TRVEL: 0.mm + 0.mm / mm Operating Life Height Pegs Force (gf) Cycles mm PTS80 J5M SMTR LFS 60 ± 50 00,000.5 No PTS80 J5K SMTR LFS 50 ± 50 00,000.5 No PTS80 J5MP SMTR LFS 60 ± 50 00,000.5 Yes PTS80 J5KP SMTR LFS 50 ± 50 00,000.5 Yes PTS80 J0M SMTR LFS 60 ± 50 00,000.0 No PTS80 J0K SMTR LFS 50 ± 50 00,000.0 No PTS80 J0MP SMTR LFS 60 ± 50 00,000.0 Yes PTS80 J0KP SMTR LFS 50 ± 50 00,000.0 Yes PTS80 J5M SMTR LFS 60 ± 50 00,000.5 No PTS80 J5K SMTR LFS 50 ± 50 00,000.5 No PTS80 J5MP SMTR LFS 60 ± 50 00,000.5 Yes PTS80 J5KP SMTR LFS 50 ± 50 00,000.5 Yes Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: Environmental OPERTING TEMPERTURE: VDC 50 m 00 V C (mn) 00 mω 00 MΩ 0 ms -40 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Packaging Switches in reels of,500 pieces for.5 and.0 mm height Switches in reels of,300 pieces for.5 mm height Dimensions of reels according to EI 48 External diameter 330 mm How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S 8 0 J S M T R L F S ctuator Type J J bend SMT Height 5.5 mm 0.0 mm 5.5 mm ctuation Force M 60 gf K 50 gf Pegs P with pegs Void no pegs Packaging SMTR Tape & reel LFS RoHS, silver plated 7 Dimensions are shown: mm

62 PTS 80 Series Microminiature SMT Top ctuated.5 &.0 mm height (H) - version shown here with pegs Ø (0,5) H 4,4 ± 0, 3,9,9,8 Ø 0,6,5 x 0,8,8 SCHEMTIC 4,3 3,,4,3 3,8 0,5 5, RECOMMENDED PC LYOUT 3 C o v e r 5 a p 7 e 3 t,,,5 +0, ± 7 5 0, 8 CRRIER TPE,4 Max 6, ± 0,5 ±0,5 ± 0,8 SEE DETIL REEL DETIL SCLE 0,5 8 Dimensions are shown: mm

63 ,,, PTS 80 Series Microminiature SMT Top ctuated.5 mm height (H) - version shown here with pegs x 0,6 0,5 (0.5) 4,5 3,9,9 ± 0, 8,,5 x 0,8 8, SCHEMTIC 4,3 3, 5, RECOMMENDED PC LYOUT 3 C o v e r a p e 3 t,,,5 +0, ± 7 5 0, 8 CRRIER TPE,4 Max 6, ± 0,5 ±0,5 ± 0,8 SEE DETIL REEL DETIL SCLE 0,5 9 Dimensions are shown: mm

64 PTS 830 Series Microminiature SMT Top ctuated NEW Features/enefits 3.5 x.6 mm footprint High number of cycles Optional ground pin Typical pplications Wearable electronics Nomad devices Remote controls Keyless entry system Specifications FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST N.O. TERMINLS: G type for SMT TRVEL: 0.5 mm + 0. mm Operating Life Ground Force (gf) Cycles Pin PTS830 GM40 SMTR LFS 60 ± ,000 No PTS830 GG40 SMTR LFS 450 ± 80 00,000 No PTS830 GM40G SMTR LFS 60 ± ,000 Yes PTS830 GG40G SMTR LFS 450 ± 80 00,000 Yes Packaging Switches in reels of 9,500 pieces Dimensions of reels according to EI 48 External diameter 330 mm Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: Environmental OPERTING TEMPERTURE: VDC 50 m 00 V C (mn) 00 mω 00 MΩ 0 ms -40 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S G 4 0 S M T R L F S Termination G Gullwing ctuation Force M 60 gf G 450 gf Packaging SMTR Tape & reel LFS RoHS, silver plated Height 40.4 mm height Grounding Option G Ground pin Void No ground pin 30 Dimensions are shown: mm

65 PTS830 GX 40 SMTR LFS NEW PTS 830 Series Microminiature SMT Top ctuated 3,5 0,5 3,05 0,3,7 RECOMMENDED PC LYOUT 0,9,4 3 4,3,6 0, 3 SEE DETIL 3 4,5 3,9,4 0,, 0,3 0,9 0, 3 0,05 0,0- DETIL SCLE 38 SCHEMTIC 3 4 Cover tape (Polyester) Carrier tape (Polystyrene) Reel (Polystyrene) (,6),5 +0, 0 4 9,3 Cover tape 5,5,75 0, 3 8,4 Max, CRRIER TPE 4 3 0,5 0,5 0,8 SEE DETIL REEL DETIL SCLE 0,5 3 Dimensions are shown: mm

66 PTS 830 Series Microminiature SMT Top ctuated PTS830 GX 40 G SMTR LFS NEW 3,5 0,5 3,05 0,3,7 RECOMMENDED PC LYOUT 5 6,3,6 0, ,7,,3,4 0, 3 4, 0,3 0,9 0, 3 Detail C DETIL C SCLE , 0,05 3 4,5 3, 3,8 SCHEMTIC Cover tape (Polyester) Carrier tape (Polystyrene) Reel (Polystyrene) (,6),5 +0, 0 4 9,3 Cover tape 5,5,75 0, 3 8,4 Max, CRRIER TPE 4 3 0,5 0,5 0,8 SEE DETIL REEL DETIL SCLE 0,5 3 Dimensions are shown: mm

67 33 Dimensions are shown: mm (inches)

68 PTS 840 Series Microminiature SMT Side ctuated Features/enefits 3.5 x 3.55 mm footprint Front PIP leads option for strong shear resistance ESD pin option Reduced footprint Typical pplications Nomad devices Remote controls Personal health diagnostics Consumer electronics Specifications FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST N.O. TERMINLS: G and front PIP types for SMT TRVEL: 0.mm + 0.mm / -0. mm LIFE: 00,000 cycles Operating SMT Type Force (gf) Leads Pegs Without ground pin PTS840 GM SMTR LFS 60-40/+70 G leads No PTS840 GK SMTR LFS 0-70/+80 G leads No PTS840 PM SMTR LFS 60-40/+70 P leads No PTS840 PK SMTR LFS 0-70/+80 P leads No PTS840 GMP SMTR LFS 60-40/+70 G leads Yes PTS840 GKP SMTR LFS 0-70/+80 G leads Yes With ground pin PTS840 ESDGM SMTR LFS 60-40/+70 G leads No PTS840 ESDGK SMTR LFS 0-70/+80 G leads No PTS840 ESDPM SMTR LFS 60-40/+70 P leads No PTS840 ESDPK SMTR LFS 0-70/+80 P leads No PTS840 ESDGMP SMTR LFS 60-40/+70 G leads Yes PTS840 ESDGKP SMTR LFS 0-70/+80 G leads Yes Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: Environmental OPERTING TEMPERTURE: VDC 50 m 50 V C (mn) 500 mω 00 MΩ 0 ms -40 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 3,500 pieces Dimensions of reels according to EI 48 External diameter 330 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. P T S S M T R L F S ESD Pin VOID No ESD Yes SMT Style G Gullwing P Front PIP Packaging SMTR Tape & reel LFS RoHS, silver plated ctuation Force M 60 gf K 0 gf Pegs* P with pegs Void no pegs * Peg option not valid for P SMT leads type Design Recommendations - P leads are recommended for applications where shear resistance is of importance - When a precise alignment between application button and the switch is requested, version with pegs are the right choice to limit the possible floating of the switch during solderability. 34 Dimensions are shown: mm

69 PTS 840 Series Microminiature SMT Side ctuated Standard G SMT Leads with ESD and Peg options 5 PC MOUNTING FCE 3,55,9,5±0, 3 0,65 0, 0-0, 4,7 3,5 0,5 5 0,6 0,5,35 4 0,5 This ground pin is for ESD function only and not solderable 0±0,05,8±0, Ground terminal can be effective even if not soldered,5±0, 0,4±0, 3 4 SCHEMTIC 5±0,,±0,,±0, 3 4,8±0,05,45±0,,95±0, +0, x 0,7-0,,7 RECOMMENDED PC LYOUT Scale 0 0,05 Max 0, Max P SMT Leads with ESD option SCHEMTIC 5 PC MOUNTING FCE 3,9±0, ,9,5 ± 3, 0, 3 0, 4,7 3,5 0, ,6 0,5 This ground pin is for ESD function only and not solderable 0±0,05 0,,35 Ground terminal can be effective even if not soldered 0, ±,5 0, ± 0,4 5,5±0,,±0,, , ±,45 ± 0,,95±0,,7 0,5± 0,6 0,05 Max 0, Max Ø 0,65 +0, 0 Through hole metalized 4,05±0, 0,8 RECOMMENDED PC LYOUT Dimensions are shown: mm 35

70 PTS 840 Series Microminiature SMT Side ctuated TPE & REEL 4 5 r,,,,5 7 t, 3 9 a p e C o v e CRRIER TPE ± 0 8,4 Max, ± 0,5 ±0,5 ± 0,8 VOIR DETIL REEL DETIL SCLE 0,5 36 Dimensions are shown: mm

71 KSR Series Subminiature Tact Switch for SMT Features/enefits 4 actuation forces G terminations N.O. and N.C. Detect type available Rubber actuator IP50 sealed RoHS compliant and compatible Typical pplications utomotive Medical equipment Industrial electronics Smart meters Specification FUNCTION: momentary action CONTCT RRNGEMENT: Normally Open TERMINLS: Gullwing type for SMT Mechanical Operating force Operating life Travel Type Newtons (grams) (operations) (mm) KSRG LFS / KSR3G LFG,5 <,85 (85) <, 00,000 0,5 ± 0,5 KSRG LFS / KSR3G LFG,9 <,5 (5) <,6 00,000 0,3 ± 0,5 KSR3G LFS /KSR33G LFG,5 < 3,00 (300)< 3,75 00,000 0,35 ± 0,5 KSR5G LFS / KSR53G LFG 3,4 < 4,50 (450) < 5,6 00,000 0,5 ± 0,5 KSRG NC LFS,5 <,5 (5) < 3 30,000 0,3 ± 0,5 KSR3G NC LFG,5 < (00) <,5 30,000 0,3 ± 0,5 Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mv 0 mv MXIMUM CURRENT DC: 50 m 0 m MINIMUM CURRENT DC: m m CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: (00 V): G Ω (between terminals) OUNCE TIME: ms max. Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Overload: 0 Newtons Detect switch versions are available. Please see Detect chapter KSRD/M series. Packaging Switches are delivered on continuous tape, in reels of,500 pieces. Process SOLDERING: Compatible with lead free reflow soldering process. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S R G ctuator Soft actuator Operating Force.8 N (80 grams).0 N (00 grams) N (300 grams) N (450 grams) Contact Material Silver 3 Gold Switch Function (NONE) Normally open NC Normally closed* Termination G Gull wing LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. *vailable on KSR3G only. Dimensions are shown: mm 37

72 KSR ø,9,5,75 KSR Series Subminiature Tact Switch for SMT 7,3 6 Recommended PC layout 6 8,4 3,8 TPE & REEL 0,5,8 5,5, ø,5 6,5 7,65, 4 ø,5 DIRECTION OF FEED 38 Dimensions are shown: mm

73 KSR Long Life-00,000 cycles-gold and Silver Series Subminiature Tact Switch for SMT Features/enefits 4 actuation forces G terminations N.O. Detect type available Rubber actuator IP50 sealed RoHS compliant and compatible Typical pplications utomotive Medical equipment Industrial electronics Specification FUNCTION: momentary action CONTCT RRNGEMENT: Normally Open TERMINLS: Gullwing type for SMT Mechanical Operating force(fa) Operating life Travel Type Newtons (grams) (operations) (mm) Silver versions KSRG LFS,5 <,85 (85) <, 00,000 0,5 ± 0,5 KSRG LFS,9 <,5 (5) <,6 00,000 0,3 ± 0,5 KSR3G LFS,5 < 3,00 (300)< 3,75 00,000 0,35 ± 0,5 KSR5G LFS 3,4 < 4,50 (450) < 5,6 00,000 0,5 ± 0,5 Gold versions KSR4G LFS,5 <,85 (85) <, 00,000 0,5 ± 0,5 KSR4G LFS,9 <,5 (5) <,6 00,000 0,3 ± 0,5 KSR34G LFS,5 < 3,00 (300)< 3,75 00,000 0,35 ± 0,5 KSR54G LFS 3,4 < 4,50 (450) < 5,6 00,000 0,5 ± 0,5 Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 V dc 3 V dc MINIMUM VOLTGE: 0 m Vdc 0 m Vdc MXIMUM CURRENT DC: 50 m 0 m MINIMUM CURRENT DC: m m CONTCT RESISTNCE: 00 m Ω INSULTION RESISTNCE (00 V): G Ω (between terminals) OUNCE TIME: ms max Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Process SOLDERING: Compatible with lead free reflow soldering process. OVERLOD: 0 Newtons Packaging Switches are delivered on continuous tape, in reels of,500 pieces. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S R G ctuator Soft actuator Operating Force.8 N (80 grams).0 N (00 grams) N (300 grams) N (450 grams) Contact Material Silver 4 Gold Termination G Gull wing LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. Dimensions are shown: mm 39

74 KSR Long Life-00,000 cycles-gold and Silver Series Subminiature Tact Switch for SMT KSR ø,9,5,75 7,3 6 Recommended PC layout 6 8,4 3,8 TERMINTION TPE & REEL 0,5,8 5,5, ø,5 6,5 7,65, 4 ø,5 DIRECTION OF FEED 40 Dimensions are shown: mm

75 Features/enefits Low profile of.7 mm Excellent tactile feel High shear force Range of actuation forces Large flat top RoHS compliant and compatible KSS Series Subminiature SMT Side ctuated Typical pplications Cellular phone Industrial electronics Health diagnostic electronics Specification FUNCTION: momentary action CONTCT RRNGEMENT: N.O. TERMINLS: Gullwing IP40 sealed Mechanical OVERLOD: 0N TCTILE FEELING: and 4N: 5% min..5n: 30% min. Operating force Operating life Travel Type Newtons (grams) (operations) (mm) KSSG.0 (00) ± ,000 0,3 ± 0,5 KSS3G.5 (50) ± ,000 0,3 ± 0,0 KSS4G 4.0 (400) ±.0 00,000 0,3 ± 0,5 Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m m DIELECTRIC STRENGTH: 50 VDC CONTCT RESISTNCE: < 00 mω INSULTION RESISTNCE (00 VDC): 0 9 Ω OUNCE TIME: < 3 ms Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Process Infared reflow soldering in accordance with IEC NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Packaging Tape and reels in reels of 3,000 pieces. External diameter 330mm ± mm. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S S G ctuator Standard,, (0.043) 3 Large,,8 (0.070) Operating Force.0 N (00 grams) 3.5 N (50 grams) N (400 grams) Termination G Gull wing, SPST LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. Contact Material Silver 3 Gold Dimensions are shown: mm 4

76 KSS Series Subminiature SMT Side ctuated KSS 4,4 3,5 3, == ==,7 3,7 7 5,5 7,6 4,,5 0,8,7 (x) CTUTOR STNDRD,, (0.043) 3 LRGE,,8 (0.070) 4,4 4,4,,8 TPE & REEL,75 ± 0, ± 0, 8 ± 0, +0, ø,5 0 4 ± 0, ± 0,3 5,5 ± 0, 4 ± 0, 7,4 ± 0, 5 ± 0, 3,9 ± 0, DIRECTION OF FEED +0, ø,5 0 4 Dimensions are shown: mm

77 KSC Series Sealed Tact Switch for SMT Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical pplications utomotive Cellular phones Industrial electronics Network infrastructure and IT Elevator Specification FUNCTION: Momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: J bend & Gullwing type for SMT SELING: IP67 except KSC5 (IP50) Liability Limitation This datasheet does not provide enough information for applications that require a certain level of quality or safety such as automotive, medical systems, or safety equipement. Please contact customer service for the contractual specification package. Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mv 0 mv MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m* 0. m DIELECTRIC STRENGTH (50 Hz, min.): 50 Vrms CONTCT RESISTNCE: 00mΩ INSULTION RESISTNCE (00 V): 0M Ω OUNCE TIME: ms * Ultra low current with 0 µ - VDC version are available upon request for KSC and KSC4 Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Process SOLDERING: Depending on the application, this component is suited to the following methods: Terminals being silver or gold plated over a nickel barrier, the use of slightly activated flux is suitable. Soldering on double wave machine for vertical versions: soldering time 5 sec. Cleaning according to typical washing processes. Infrared Reflow Soldering in accordance with IEC Packaging Tape and Reel (see series for quantity information) NOTE: Specifications listed above are for switches with standard options. KSC Product Range KSC KSC KSC3 KSC4 KSC5 KSC6 KSC7 KSC8 KSC9 KSC0 Without actuator Soft actuator Hard actuator Soft actuator Hard actuator Hard actuator Soft actuator Hard actuator H =.5 mm H = 3.5 mm H = 3.5 mm H = 5. mm H = 5.6 mm H = 7.7 mm H = 4.3 mm H = 4.9 mm Hard actuator H = 7.7 mm compatible with button Soft actuator H = 4.9 mm IP67 IP67 IP67 IP67 IP50 IP67 IP67 IP67 IP67 IP67 Note: KSC Series is subject to variants. Please contact customer service for other options. Dimensions are shown: mm 43

78 KSC Series Sealed Tact Switch for SMT J J END,9 max G GULLWING,9 max +0, 0, 0 3,3 mini 6,8 +0, 0, 0 ( 7,6 ) 0 4 PD LYOUT 3 maxi 8,6 mini 4 0,7±0,05 4 PD LYOUT 5,8 maxi mini 0,7±0,05 4 MM 330 m m 6 MM m m mm Pieces 6 mm Pieces KSCJ,000 KSCG,000 KSCJ,000 KSCG,000 KSC3J,000 KSC3G,000 KSC4J & G,000 KSC5J & G,000 KSC6J & G 750 KSC7J & G,000 KSC8J & G,000 KSC9J & G 750 KSC0J & G, Dimensions are shown: mm

79 KSC Series Sealed Tact Switch for SMT KSC without actuator,5 mm high 4 max smooth surface Operating Operating Type force F life Travel (Newtons) (operations) (mm) KSC.8 ± , ± 0.5 KSC4 3 ± , ± 0.5 KSC5 5.5 ±.4 00, ± 0.5 Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm +0, 0, 0 +0,3 6, 0 R0, ø +0,3 6, 0,5 min,9 max How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C Operating Force.8 N * (80 grams) 4 3 N * (300 grams) N (550 grams) LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated * See mechanical chart above to confirm specifications Contact Material Silver 3 Gold Termination J J bend G Gullwing 45 Dimensions are shown: mm

80 KSC Series Sealed Tact Switch for SMT KSC soft actuator 3,5 mm high ø,9 Operating Operating Type force F life Travel (Newtons) (operations) (mm) KSC0.6 ± 0.6 5,000, ± 0. KSC ± , /- 0. KSC ± 0.5,000, ± 0.5 KSC4 3.5 ± , ± 0. KSC ± , ± 0. KSC3 SPD 3.5 ± , ± 0. KSC4 SPD 3.55 ± , ± 0. KSC5 SPD 6. ±.55 00, ± 0. Packaging,9 max +0, 0, 0 +0,3 6, 0 +0,3 6, 0 3,5 Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C Operating Force 0.6 N (60 grams) N (00 grams) N (350 grams) N (550 grams) See mechanical chart above to confirm specifications NONE Standard version SPD Special delta version LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated Contact Material Silver Silver long life 3 Gold 4 Gold long life Termination J J bend G Gullwing 46 Dimensions are shown: mm

81 KSC3 Series Sealed Tact Switch for SMT KSC3 hard actuator 3,5 mm high ø,8 Operating Operating Type force F life Travel (Newtons) (operations) (mm),9 max 3,47 KSC3 ± , /- 0 KSC34 3 ± , /- 0 KSC35 5 ± 00, /- 0 Packaging +0, 0, 0 +0,3 6, 0 +0,3 6, 0 Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 3 Operating Force N (00 grams) 4 3 N (300 grams) 5 5 N (500 grams) LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated See mechanical chart above to confirm specifications Contact Material Silver 3 Gold Termination J J bend G Gullwing 47 Dimensions are shown: mm

82 KSC4 Series Sealed Tact Switch for SMT KSC4 soft actuator 5, mm high ø,7 Operating Operating Type force F life Travel (Newtons) (operations) (mm) KSC40 50SH.45 ± ,000, ± 0.5 KSC4 70SH.4 ± 0.35,000, ± 0.0 KSC4 70SH.7 ± , ± 0.5 KSC4 70SH.7 ± 0.45,000, ± 0.5 KSC44 70SH 4 ± 300, ± 0.5 KSC44 70SH 4 ±,000, ± 0.5 KSC45 70SH 4.5 ± , ± 0. KSC44 SPD 3.5 ± , ± 0. KSC44 ST 3.4 ± 300, ± 0.5 KSC44 ST 3.4 ± 300, ± 0.0 KSC46 ST 6.5 ±.75 00,000 ± 0.3 KSC46 ST 6.5 ± , ± 0.,9 max +0, 0, 0 +0,3 6, 0 +0,3 6, 0 5, Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 4 Operating Force 0.45 N (45 grams).4n (40 grams).7 N (70 grams) 4 4 N (400 grams) N (45 grams) N (65 grams) See mechanical chart above to confirm specifications Contact Material Silver Silver long life 3 Gold 4 Gold long life Termination J J bend G Gullwing 50SH 50 shore ** 70SH 70 shore *** SPD Special delta version ST High click ST Low click LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated ** applies to KSC40J50SH only *** applies to KSC4J70SH, KSC4J70SH and KSC44J70SH 48 Dimensions are shown: mm

83 KSC5 Series Tact Switch with Rocker Option for SMT KSC5 hard actuator 5,6 mm high Operating force Operating force Travel to Travel to axial F lateral FL make make Life expectancy Life expectancy Type N (grams) N (grams) ±30% axial (mm) lateral (mm) cycles, axial cycles, lateral KSC5 ± ± ± ,000 0,000 KSC54 3 ± ± ± ,000 0,000 Packaging Switches delivered on continuous tape & reels of,000 pieces, dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm,9 max, ø 4,7 ø,4 3,3 mini 6,8 6,+0,3 0 5,6 4 0,7±0,05 +0, 0, 0 +0,3 6, 0 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 5 R O H S Operating Force N (00 grams) 4 3 N (300 grams) Contact Material Silver 3 Gold Termination J J bend G Gullwing RoHS compliant, non compatible 49 Dimensions are shown: mm

84 KSC6 Series Sealed Tact Switch for SMT KSC6 hard actuator 7,7 mm high Operating Operating Type force F life Travel (Newtons) (operations) (mm) ø 4,7 ø,9 KSC6.7 ± , ± 0. KSC63.55 ± , ± 0. KSC ± , ± 0. Packaging Switches delivered on continuous tape & reels of 750 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm,6,9 max +0, 0, 0 +0,3 6, 0 +0,3 6, 0 7,7 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 6 Operating Force.7 N (70 grams) 3.55 N (55 grams) N (340 grams) LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated See mechanical chart above to confirm specifications Contact Material Silver 3 Gold Termination J J bend G Gullwing 50 Dimensions are shown: mm

85 KSC7 Series Tact Switch with Rocker Option for SMT KSC7 soft actuator 4,3 mm high ø 3 Operating Operating Type force F life Travel (Newtons) (operations) (mm),9 max 4,3 KSC70.6 ± 0.6 5,000, ± 0. KSC7.5 ± , ± 0.5 KSC ± 300, ± 0. Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm +0, 0, 0 +0,3 6, 0 +0,3 6, 0 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 7 Operating Force 0.6 N (60 grams).5 N (5 grams) N (390 grams) LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated See mechanical chart above to confirm specifications Contact Material Silver 3 Gold Termination J J bend G Gullwing 5 Dimensions are shown: mm

86 KSC8 Series Sealed Tact Switch for SMT KSC8 hard actuator 4,9 mm high Operating Operating Type force F life Travel (Newtons) (operations) (mm) KSC8 3.5 ± , ± 0. KSC8 OL.7 ± , ± 0. KSC83 OL.55 ± , ± 0. KSC84 OL 3.4 ± , ± 0. Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm,5,9 max +0, 0, 0 +0,3 6, 0 ø 4,7 ø,96 +0,3 6, 0 4,9 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 8 Operating Force.7 / 3.5 N (70/35 grams) 3.55 N (55 grams) N (340 grams) See mechanical chart above to confirm specifications Contact Material Silver 3 Gold Option NONE Long travel OL Short travel Termination J J bend G Gullwing LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated 5 Dimensions are shown: mm

87 KSC9 Series Sealed Tact Switches for SMT KSC9 hard actuator 7,7 mm high ø 4,7±0, ø,95±0,0 Operating Operating Type force F life Travel (Newtons) (operations) (mm) KSC9.7 ± , ± 0. KSC93.5 ± , ± 0. KSC ± , ± 0. Packaging Switches delivered on continuous tape & reels of 750 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm,6±0,,9 max +0, 0,0 +0,3 6, 0 4±0, * 0, 3,3 min +0,3 * 6, 0 +0, 6,8-0,,05±0,05 7.7±0. 0,7±0,05 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. K S C 9 Operating Force.7 N (70 grams) 3.55 N (55 grams) N (340 grams) Contact Material Silver 3 Gold Termination J J bend G Gullwing LFS Lead free compatible, silver plated. LFG Lead free compatible, gold plated. T N K S C 9 Type NONE 5.4mm height mounted Color 0 Light grey 40 Red 80 White 90 lack ø 6,35 ø 6 R 0,5 0,±0, 5,4±0,4 SWITCH WITH CP 53 Dimensions are shown: mm

88 KSC0 Series Sealed Tact Switches for SMT KSC0 soft actuator 4,9 mm high Ø,7 ± 0, Operating Operating Type force F life Travel (Newtons) (operations) (mm) KSC00.45 ± ,000, ± 0.5 Packaging Switches delivered on continuous tape & reels of,000 pieces Dimensions according to EI RS-48/ IEC standard External diameter 330 ± mm,9 max 6, +0,3 * 0 4 ± 0, 0, +0, 0 0, 0 * 3,3 mini +0,3 6, 0 6,8 +0, -0, 4,9 ± 0, 0,7 ± 0,05 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S C 0 0 L F S Operating Force 0.45 N (45 grams) LFS Lead free compatible, silver plated See mechanical chart above to confirm specifications Contact Material Silver Termination J J bend G Gullwing Note: KSC0 offered with yellow actuator as standard, hardness 55 Shore 54 Dimensions are shown: mm

89 KSC4V Series Side ctuated Sealed Tact Switch Features/enefits Full SMD side actuated Haptic adaptability Pin in paste terminations Tape & reel IP67 Typical pplications utomotive Industrial electronics Network equipment Telecommunications Specification FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: pin in paste signal terminals 3 SMD ground terminals Mechanical Type Force Operating Life Travel (N) (operations) (mm) KSC44VSPDLFS 3.5 ±.0 300, ± 0. KSC4V70SHLFS.55 ± , ± 0. NOTE: asic version is based on KSC44V SPDELT LFS. Other configurations of haptics are available upon demand. MISUSE OVERLOD: 40N with back support SHER FORCE:0N without back support Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mv 0 mv MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m 0. m DIELECTRIC STRENGTH (50 Hz, min.): 50 Vrms CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE (00 V, initial stage): > 0 9 Ω OUNCE TIME: < ms Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Process SOLDERING: Depending on the application, this component is suited to the following methods: Cleaning according to typical washing processes. Infrared Reflow Soldering in accordance with IEC TERMINLS: pin in paste, silver or gold plated TOP PLTE: tin plated MSL level: Vacuum pick head mandatory Packaging In reels of 500 pieces. Dimensions of reels according to EI RS48 or IEC 863. External diameter 330 mm ± mm. NOTE: This product is designed and manufactured for general electronic devices. For systems where reliability and safety are required, please contact your sales representative to secure product integration and function to secure usage. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. K S C 4 V L F S ctuator short, soft* 4 long, soft Operating Force*** N (00 grams) N (350 grams) Contact Material Silver 3 Gold LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated ctuator / Tactile 70SH Silicon 70SH**** SP DELT Silicon 70SH improved tactile**** RT Hard rubber RT Long travel hard rubber * KSC version available upon demand *** Force available upon demand (variant version) **** vailable for KSC4 only 55 Dimensions are shown: mm

90 KSC4V Series Side ctuated Sealed Tact Switch +0,3 6, * 0 0,75±0,05 5,6±0,5 0,8 3,4 4±0, 7,5 3,4 6,5 6,7 0,5±0,05 90 ± Switch standing plan reference P &P area ( ø,9 max ),3±0,5 90 ±3,3 3,9±0, ø,7±0, 0, METLIZED HOLES ø,±0,05 ø 0,,5 3,9±0,,5 GROUND 6,6 PC LYOUT PIN IN PSTE TOP VIEW ON TWO PC SIDES ø,6±0, ø 0, 0,8,5 TPE ND REEL C SECTION C-C +0,3 6-0, 7,5±0,,75±0, 5 C,85 3,7 4, 5,35 7 5,±0, 4±0, ±0, +0, ±0, Ø,5 0 7,7,8 7,±0, 9,3±0, +0, Ø,5 0 4,5 SECTION INTEGRTION 56 Dimensions are shown: mm

91 KSE Series Low Profile Tact Switch Features/enefits Low profile Cost efficient J or G terminations Tape and reel IP67 Specification FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: J bend & Gullwing type for SMT Mechanical Operating Type Force F Operating Travel (Newtons) Life (mm) Min. Max. Operations KSEM3JLFS,6 ± 0,6 300,000 0,3 + 0,/-0, KSEM3GLFS,6 ± 0,6 300,000 0,3 + 0,/-0, KSEK43JLFS,5 ± 0,75 300,000 0,3 ± 0, KSEK43GLFS,5 ± 0,75 300,000 0,3 ± 0, NOTE: For cost effectiveness the tactile feeling is not specified and can change along production. If your application requires a defined tactile effect, please consider KSC series for your application. Typical pplications Smart meters Home appliances Consumer electronics Industrial electronics Telecommunications Electrical MXIMUM POWER: V MINIMUM/MXIMUM VOLTGE: 0 mv / 3 VDC MINIMUM/MXIMUM CURRENT: m /50 m DIELECTRIC STRENGTH: (50 Hz, min.): 50 V CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: (00 V): 0 9 Ω OUNCE TIME: ms Environmental OPERTING TEMPERTURE: -40 C to 85 C STORGE TEMPERTURE: -55 C to 85 C Process SOLDERING: Depending on the application, this component is suited to the following methods: Cleaning according to typical washing processes. Infrared Reflow Soldering in accordance with IEC Packaging In reels of,000 pieces Dimensions of reels according to EI RS48 or IEC 863. External diameter 330 mm ± mm. NOTE: Specifications listed above are for switches with standard options. KSE series is not subject to adaptation and/or modification for specific use. If you require additional features, please refer to the KSC series. KSE is not recommended for applications requiring high level of performance such as aerospace, automotive and some industrial applications. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. K S E Operating Force M.5N for 3.mm height K.5N for 4.3mm height Height 3 3.mm mm Termination J J bend G Gullwing LFS Lead free compatible, silver plated. 57 Dimensions are shown: mm

92 KSE Series Low Profile Tact Switch HEIGHT 3 3. MM HEIGHT MM HEIGHT +0, ø,9-0, ø 3 +0, 0, 0 +0, 0, 0,9 max +0, 0, 0 0, 5 +0, ø,9-0, 5 +0, ( 0,5 ) 7,6-0, 3,±0, PD LYOUT 5,8 maxi 0±0,3 6,+0,3 * 0 +0, ø,9-0, +0, 0, 0 +0,3 6, 0 +0,3 6,5 0 4±0, 0,7±0,05,9 max 3,±0, 0, PD LYOUT 3 maxi 4 * +0,3 6,5 0 4±0, 0,7±0,05 4,9 max 3,±0,,9 max 4,3 0, TERMINTION G GULLWING mini J J END 8,6 mini +0, 6,8-0, 58 Dimensions are shown: mm )

93 KSE Series Low Profile Tact Switch TPE & REEL mm height ø,5+0,/-0,0 ( /-.000) ø,5+0,/-0,0 ( /-.000),00,05 ( ) 8,0 (.35),0±0,05 (.079±.00),75 (.069) 0' max. 0,5±0,05 (.00±.00) 6 mm height,00,3 (.47.0) 7,+0,/-0,0 ( /-.000) 3,5+0,/-0,0 ( /-.000) 6,6+0,/-0,0 ( /-.000) 5,5 (.7) 59 Dimensions are shown: mm

94 KT Series Full SMT Top & Side ctuated Sealed Tact Switch Features/enefits Full SMT side-actuated tact switch SMT top-actuated tact switch with G or J terminations High shear force with extended bracket Easy to pick & place with top plate tab Rubber or hard plastic actuator Press fit or snap fit caps RoHS compliant and compatible Typical pplications Telecommunications Computer products Instrumentation Power supply Specification CONTCT RRNGEMENT: SPST, N.O. TERMINLS: SMT termination Electrical CONTCT RTING:.0 V 3 V C or DC max. ELECTRICL & MECHNICL LIFE: 00,000 make-and-break cycles at full load. DIELECTRIC STRENGTH: 50 Vrms sea level. CONTCT RESISTNCE: elow 50 mω typ. -4 V DC, 00 m. INSULTION RESISTNCE: 0 9 Ω min. Environmental OPERTING TEMPERTURES: g version: -40 C to 90 C u version: -40 C to 5 C Process SOLDERILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). DEGREE OF PROTECTION: IP57; protection against harmful dust deposits, full-scale voltage protection. Packaging Switches supplied in anti-static tape and reels per EI 48-. Tape and cover strip are conductive for use near statically sensitive components. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. SWITCH K T 3 ctuator 0* Soft, flush * Soft, 0,64 mm * Soft,,4 mm P** Hard,,36 mm P3** Hard,, mm P4** Hard, 3,96 mm S*** ø0, for Press Fit Caps S*** ø0,4 for Snap Fit Caps (with anti-rotation) Orientation and Mounting Style SM Top Gullwing JM Top J end **** 3 SM Right angle SM Right angle with front solder pad SM Right angle with front solder pad and pick & place tab S3M Right angle with pick & place tab Contact Plating 4 Silver 5 Gold Contact Plating LFS RoHS compliant and compatible. Silver plated LFG RoHS compliant and compatible. Gold plated * 0, & available with, & 3 mounting bracket only. ** P, P3, P4 actuators suitable with & mounting bracket only. *** S & S available with & mounting bracket only. **** JM available with O,,, P, P3, P4 without mounting bracket. UTTON To order buttons in bulk T N K T utton Style 0 Press fit 03 Snap fit, high temperature utton Color 90 lack 80 Ivory (natural) 40 Red 60 Dimensions are shown: mm (inches)

95 KT Series Full SMT Top & Side ctuated Sealed Tact Switch SERIES KT 4,38 (.73) 6,60 MX. (.60) ø3,8 (.50) 3,44 (.36) CTUTOR 0 SOFT, FLUSH* SOFT, 0,64 mm* SOFT,,4 mm* 4,38 (.73) 0,64 (.05) 0,86 (.034) 4 7,57 (.98) 3,8 (.5) 0,76 TYP. (.030) 4,00 (.57),4 (.088) 3,44 (.36) Ø 3,8 (Ø.5) ø3,8 (ø.5) P HRD,,36 mm P3 HRD,, mm P4 HRD, 3,96 mm**,36 (.093), (.044) 3,96 (.56) ø3,55 (.40) ø3,55 (.40) ø3,55 (.40) S Ø0, FOR PRESS FIT CPS*** S Ø0,4 FOR SNP FIT CPS*** 6,5 (.4) ø5,08 (.00) ø5,7 (.5) 4 3,8 (.5) 4,90 (.93) 3,8 (.5) 4,9 SR (.69) 4,98 (.96) 4 * 0, & available with, & 3 mounting bracket only. ** P, P3, P4 actuators suitable with & mounting bracket only. *** S & S available with & mounting bracket only. **** JM available with O,,, P, P3, P4 without mounting bracket. 6 Dimensions are shown: mm (inches)

96 6.6 MX. 6.6 MX. KT Series Full SMT Top & Side ctuated Sealed Tact Switch ORIENTTION & MOUNTING STYLE SM TOP GULLWING JM TOP J END. 4, ± ± 0, 4~ 4~.84 0,7 c 0, 6.3 ± 0.3 Ø3.56 ± TYP SUGGESTED PD LYOUT SCLE: 7: 3 4 SCHEMTIC 6.4 ± ± 0.5 7, ± 0.. 4, ,38 `, ± 0.3 Ø3.56 ± ,77 TYP. 0, SCHEMTIC 5.59 SUGGESTED PD LYOUT SCLE: 8: SM RIGHT NGLE SM RIGHT NGLE WITH FRONT SOLDER PD,7 (.067),7 (.067) 4,57 (.80),03 (.080),90 (.4) ø3,8 (.50) SWITCH FCE, (.044) 0,38 (.05) 4,38 (.73),90 (.4) 6,30 (.48) ø3,56 (ø.40) 4,38 (.73) 3,44 (.36) 6,60 MX. (.60) 0,86 (.034) 4 7,57 (.98) 3,8 (.5) 0,76 TYP. (.030) 4,00 (.57) 6,60 MX (.60) 4 3,44 (.36) 3,8 (.5) 0,86 TYP. (.034) 4 0,76 (.030) 4,0 (.57) 7,77 (.306) 6 Dimensions are shown: mm (inches)

97 KT Series Full SMT Top & Side ctuated Sealed Tact Switch SM RIGHT NGLE WITH FRONT SOLDER PD ND PICK & PLCE T S3M RIGHT NGLE WITH PICK & PLCE T,7 (.067) 4,57 (.80),03 (.080),7 (.067) SWITCH FCE 3,86 (.5) 0,38 (.05) 7, (.80) 4.73 (4,38).50 (3,8) 3,44 (.36) 3,8 (.5),90 (.4) 6,9 (.48) 0,86 TYP. (.034) 4,0 (.57) 4 7,77 (.306) 5,08 (.00) 0,76 (.030) ø3,56 (ø.40) SWITCH FCE 7, (.80) 4,37 (.7) 0,38 (.05) 4 3,8 (.50) 4,6 (.8) 3,8 (.5),90 (.4) 0,86 TYP. (.034) 6,9 (.48) 4,0 (.57) 4 7,77 (.306) 5,08 (.00) 0,76 (.030) ø3,56 (ø.40) PD LYOUT SM & SM MOUNTING RCKET PD LYOUT SM & S3M MOUNTING RCKET.0 (,79).067 (,70) SWITCH FCE.05 (0,38).00 (,54).95 (4,95).30 (5,84).067 (,70) SWITCH FCE.48 TYP. (3,76).345 (8,76).0 (5,33).030 (0,76).48 (3,76).65 (4,9) (8,76).30 (5,84).00 (,54).030 (0,76) 4.95 (4,95).65 TYP. (4,9) 4 SCHEMTIC 63 Dimensions are shown: mm (inches)

98 KT Series Full SMT Top & Side ctuated Sealed Tact Switch UTTON To order buttons in bulk UTTON 0 PRESS FIT 03 SNP FIT, HIGH TEMPERTURE PRT Internal utton NUMER Part Number Color TN KT Ivory (Natural) TN KT lack TN KT Red Materials: Nylon Finish: Gloss,54 (.00) ø5,08 (.00) 3,94 (.55) PRT Internal utton NUMER Part Number Color TN KT Ivory (Natural) TN KT lack Materials: Nylon Finish: Gloss 64 Dimensions are shown: mm (inches)

99 K5T Illuminated SMT Tact Switch Features High bright LED s Gold plated dome contact offering superior contact reliability in time Excellent ergonomics: sharp tactile feel and audible click Reduced space usage on board in 40 N overload Tape and reel RoHS compliant and compatible Specification FUNCTION: momentary action CONTCT RRNGEMENT: Normally Open TERMINLS: SMT with positioning pegs; SMT without positioning pegs is available, contact Customer Service Mechanical Operating force Operating Travel (total F Newtons life travel) Type (grams) (operations) mm(mm) K5T WH 43GP 4.0 (400) 00,000 0,5 (0.8) Tolerances of operating force F is ± 5%. Typical pplications pplication requiring illumination Server, storage Network infrastructure Telecom Medical Electrical POWER MIN/MX: 0.0V /.0V VOLTGE MIN/MX: 0mVdc 3 Vdc CURRENT MIN/MX: 0.m 00m CONTCT RESISTNCE: <00m Ω INSULTION RESISTNCE: >G Ω initial, >0M Ω after damp heat OUNCE TIME: <0ms Environmental OPERTING TEMPERTURE: -40 C to 5 C STORGE TEMPERTURE: -55 C to 5 C RELTIVE HUMIDITY: 90 to 96% according to NF EN PROTECTION: dust protection and flux tight (IP 40) OVERLOD: 40N min Packaging Standard: 900 pcs per reel; Reel diameter 380 mm Reduced: 80 pcs per reel; Reel diameter 80 mm Process SOLDERING: Compatible with the lead free soldering profile. No washing Materials CONTCTS: u over Ni SOLDERING: u over Ni HOUSING: Thermoplastic UL94 V0 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. K 5 T W H 4 3 G LED color YE (Yellow) GN (Green) RD (Red) U (lue) WH (White) G (Green apple) Operating Force N (400 grams) Termination G Gulf wing Peg NONE (STD.) P (with pegs) Contact Material 3 Gold (u) Packaging NONE (900 pieces per reel) R (reduced packaging 80 pieces per reel) Dimensions are shown: mm 65

100 K5T Illuminated SMT Tact Switch K5T ELECTRICL GRPH 3,6,8,8,6,6,6 Hole Ø 0,95 3 8,4 0,8 8, 8 5 4, 0,8 Ø6,56,3 Ø 0,8 Ø, PC LYOUT TOP VIEW 4,85 0, Force Plating LED Shift 5 4, 8, Hole Ø,5 Day of year Year 6, 0,,75 4 Ø,5 8,5 6,65 4 ± 0,3,4 8,5,,5 5,6 SECTION - Ø380 8,8 Ø50 66 Dimensions are shown: mm

101 K8 Lighted SMT Tact Switch with Rugged LED Mounting Process Features LED assembly without soldering Various LED options No light perturbation Sound haptic Various climatic classes Typical pplications utomotive Network equipment Telecommunications Medical equipment Industrial controls Specification FUNCTION: momentary action CONTCT RRNGEMENT: make control = SPST, N.O. TERMINLS: Gullwing type for SMT, peg as option, terminals for LED Mechanical ctuation Operating Total Force Life Travel Type (N) (operations) (mm) K8xx4G LFS , ±0.5 Tolerances on actuation force is ± 0.5%. SELING LEVEL: IP40 Illumination Colors White, blue, pure green, orange, super red LED technical information available on product specification. For any extra color, please contact your sales representative. Packaging In reels of 900 pieces under sealed foil. Dimensions of reels according to EI RS48 or IEC 863. External diameter 380 mm. Electrical Silver Gold MXIMUM POWER:.0 V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mv 0 mv MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m 0. m DIELECTRIC STRENGTH: (50 Hz, min.) 50 Vrms CONTCT RESISTNCE: < 00mΩ INSULTION RESISTNCE: (00 V, inital stage) > 0 9 Ω OUNCE TIME: < 0 ms Environmental OPERTING TEMPERTURE: STORGE TEMPERTURE: Process -40 C to +85 C (Silver) -40 C to +5 C (Gold) -55 C to +85 C (Silver) -40 C to +5 C (Gold) SOLDERING: Compatible with the lead free soldering profile. No washing MSL level: 5 NOTE: The specifications show in the datasheet are for reference only and are not valid for design-in work. Please contact your sales representative to request drawings and product specifications. For systems where reliability and safety are required, please contact your sales representative to secure product integration and function to secure usage. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. K 8 4 G LED color PG Pure Green SR Super Red OG Orange U lue WH White Operating Force N Termination G Gulf wing Contact Material Silver 3 Gold as option LFS RoHS compliant and compatible. Silver plated. LFG RoHS compliant and compatible. Gold plated. Dimensions are shown: mm 67

102 K8 Lighted SMT Tact Switch with Rugged LED Mounting Process PRT NUMER REF LED EMITTED COLOR LUMINOUS INTENSITY (mcd) If = 0 m CHROMTICITY COORDINTES OR PEK WVE LENGTH (typ) If = 0 m FORWRD VOLTGE V If = 0 M min typ X Y min max K8WH4G LW T67C-SU-5K8L WHITE ,33 0,33 3 K8U4G L T67C-PR-35 LUE nm K8PG4G LP T676-LM-5 PURE GREEN nm.8. 4 K8SR4G LP T676-QR- SUPER RED nm.8.3 K8OG4G LO T676-RS-4 ORNGE nm ELECTRICL GRPH,8,8 3 0, ,8 6,56 8,3,8,8 8 4,85 0,±0,05 6± 0, 5 PC LYOUT TOP VIEW Year 0, 3 8,4 Day of year 3,,5 5 4 pick and place area : top of LED.5 max Dimensions are shown: mm

103 K8 Lighted SMT Tact Switch with Rugged LED Mounting Process TPE & REEL 380/5" ø 3 d ir e c tio n o f u n r e e lin g Round sproket holes Dimensions are shown: mm

104 K5V Illuminated Tact Switch Features Gold plated dome contact SPST/SPDT Excellent ergonomics High bright leds Reduced space usage on board 40 N overload Tape and reel RoHS compliant and compatible Specification FUNCTION: momentary action CONTCT RRNGEMENT: Normally Open + Normally Closed TERMINLS: THT: Through hole terminals with positioning pegs SMT: Surface mount terminals with positioning pegs PM: Panel mount solder terminals with wire hole Mechanical Operating force Operating Travel (total F Newtons life travel) Version (grams) (operations) mm(mm) THT, SMT, PM 4.0 (400) 5,000. (.4) Tolerances of operating force F is ± 5%. Packaging THT: 60 pieces per tray; 800 pieces per box SMT: 330 pieces per reel (reel ø 360mm); 30 pieces per box PM: 60 pieces per tray; 00 pieces per box Typical pplications When backlighting and switch are required to be a in component The dome contact secures a superior contact reliability in time The ergonomics of K5V provides a long travel, a sharp tactile feel and an audible click Server, storage, automotive, network infrastructure, medical Electrical POWER MIN/MX: 0.0V /.0V VOLTGE MIN/MX: 0mVdc 3 Vdc CURRENT MIN/MX: 0.m 00m CONTCT RESISTNCE: <50m Ω INSULTION RESISTNCE: >G Ω initial, >0M Ω after damp heat OUNCE TIME: <5ms Environmental OPERTING TEMPERTURE: -40 C to 85 C STORGE TEMPERTURE: -50 C to 85 C RELTIVE HUMIDITY: 90 to 96% according to NF EN PROTECTION: dust protection and flux tight OVERLOD: 40N min Process SMT Soldering: Compatible with the lead free soldering profile No washing THT Soldering: Compatible with the lead free soldering profile No washing PM Soldering: Low wattage soldering iron (5-50 watts max). Solder time 3 seconds max. No washing Materials LED FREE CONTCTS: u over Ni SOLDERING: u over Ni HOUSING: Thermoplastic UL94 V0 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. K 5 V 4 3 ctuator without snap-in, clear (THT and PM version only) with snap-ins, clear for light pipe extension (THT and PM version only) 4 without snap-in, light grey (SMT version only) 5 with snap-ins, light grey for light pipe extension (SMT version only) ctuator color/led color Translucid/lue-mber GN Translucid/Green U Translucid/lue Operating Force RD Translucid/Red N (400 grams) RG Translucid/Red-Green WH Translucid/White WL Translucid/White (low luminosity) YE Translucid/Yellow YG Translucid/Yellow-Green CL Transparent/No LED 90 lack ctuator/no LED Termination G Surface mount P Panel mount T Through-hole 3.5mm S Through-hole.mm Contact Material 3 Gold (u) Option NONE No option P3 Terminal 3 is cut P4 Terminal 4 is cut P3 Terminal & 3 is cut P4 Terminal & 4 is cut Dimensions are shown: mm 70

105 K5V Illuminated Tact Switch K5V SMT ELECTRICL DIGRM RECOMMENDED PC LYOUT ( WITH HOLES ) ø 5 (ø.97) x ø,,5 3,9,5 (.079x.047) (.059) (.54) (.059) 0,4 5,4 4 (.06) (.3) 8,4 4,7 (.57) (.33) (.85) Shift LED,9,9 (.075) (.075) 7 (.76) Day of year Single Color LED 4 i-color LED YG 3 Y i-color LED RG 3 R C G/CY G CG/Y G/CR G CG/R reas important for switch stability on PC 3,5 (.38) (.079) (.079) ø,35 ±0,05 (ø.053 ±.00), (.047) TOP VIEW 5,8 (.8),9,9 (.075) (.075) C 4, (.047) 3 4,05 (.59) 0,85 (.033) 4, (.65) 0,85 (.033) ø 6,6 ø 6,88 (ø.60) (ø.70) Plating Year Force 5 8 9,45 (.37) (.35) (.96),6 (.063) 9, (.358) 0, -0, 0 ( ) 6x 0, (.04x.393) (.393),4 (.055) 7 (.76) TPE & REEL Direction of feed Dimensions are shown: mm (inches) 7

106 K5V Illuminated Tact Switch K5V THT x ø, (.078x ø.047) ELECTRICL DIGRM ø 5 (ø.97) 4 C ø 6,88 (ø.70) ,3 (.70) 0, (.008) ø,35±0,05 (ø.053 ±.00) C 4 8 Plating Force 0, (.005) 4, (.6) 3,5 9, (.38) (.358) 6x 0,5 (.36 x.0) ø6,6 (ø.60) Day of year 5 (.97),6 9,45 (.063) (.37) Year i-color LED YG 3 G/CY G Y CG/Y i-color LED RG 3 G/CR G R CG/R RECOMMENDED PC LYOUT ( WITH HOLES ) TOP VIEW,5,5 (.085) ø 0,8 (.085) ø,8 (ø.03) 3 (ø.07) (.35) 0,6 (.04) 7 (.80) COUPE - ø 6,6 (.60) (.866) COUPE - 4,75 (.580) Sens de thermoformage 8,75 (.344) DETIL Q 8,5 (.34) 5 (.96) 6 (.03) 3,5 (4.86) 46 ± (5.748 ±.0393),5,5 (.085) (.085) 7 (.76) 0,4 5,4 4 (.06) (.3) 8,4 4,7 (.57) (.330) (.86) Shift Year LED TRY 0,65 (.49),5 (.098) DETIL Q 90± (.47±.0393) 0,45 (.4) 4,5 (.56) 7 Dimensions are shown: mm (inches)

107 9 (.354) K5V Illuminated Tact Switch K5V PM ELECTRICL DIGRM TERMINL REFERENCES Single Color LED PRODUCT IDENTIFICTION ND DTE CODES Shift LED Plating Force,9,9 Day of year Year C 0,4 (.43) 9,7 (.38) 5x R 0,3 (.97x R.0) 8,5 (.335) Ø 6,6 (ø.60) Ø 5 (ø.96),85,85 (.) (.) 8, (.3) 9,8 (.386) 4,4 (.73) 8,6 (.339) 0,6 (.03) 4 C i-color LED YG 3 G/CY G Y 4 CG/Y i-color LED RG 3 G/CY G/CR R 4 CG/R 4 0,6 5, (.57) (.03) (.05) 8,5 ±0, 8,05 ±0,5 (30±.008) (.36±.006),3 (.05) TRY SUITLE FOR PNEL THICKNESS OF.8MM MX DETIL Q COUPE -,5 (.45) 0,6 COUPE - (.47) 0,8 (.45) 9,4 (.866) 7 (.364) 4,9 (.76) R 6 (.04) 3,5 (4.86) 46± (5.74±.039) 3,95 3,95 3 5,5 6,6 (.7) (.60) SEE DETIL Q 90± (.47±.039) 7,46 7,46 0 7,46 73 Dimensions are shown: mm (inches)

108 KSF & KSFI Series Soft ctuated Tact Switch Features/enefits Soft actuated switch Sealed front end Top and side actuated Typical pplications Low profile keyboards utomotive interfaces Industrial control Specification FUNCTION: momentary action CONTCT RRNGEMENT: make conact = SPST, N.O. TERMINLS: THT pins Mechanical Force Operating life Travel Type (N) (operations) (mm) KSF0MLFT.5 ± , ± 0. KSF0M3LFT.9 ± , ± 0. KSF0M4LFT 3.0 ± , ± 0. KSF0M5LFT 5. ±.0 00, ± 0. KSFI0V970SH LFT 3.4 ±.5 00, ± 0.5 KSF0M LFT.6 ± , ± 0. KSFI0M4 70SHLFT 3. ± , ± 0.5 Overload resistance: 40N, time Sealing: IP60 or IP67 Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mv 0 mv MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m m DIELECTRIC STRENGTH (50 Hz, min.): > 50 Vrms CONTCT RESISTNCE: < 00 m Ω INSULTION RESISTNCE (00 V, initial stage): > 0 9 Ω OUNCE TIME: < ms Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -40 C to 5 C Process SOLDERING NOTE: Other configurations of haptics and terminals are available upon demand. Please also refer to KSF and KSFI Mk catalogues pages for other options. This product is designed and manufactured for general electronic devices. For systems where reliability and safety are required, please contact your sales representative to secure product integration and function to secure usage. Packaging In boxes of 50 pieces (V type) or 500 pieces (M type). How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. K S 0 L F T Type F Flat membrane FI Soft actuator Insertion M Manual (bulk packaging) V utomatic (bulk packaging)** * valid for KSFI only ** valid for KSFI MK series only *NOTE: Products must be checked according customers soldering parameters especially in terms of flux resistance. Sealing IP60 IP67 Contact Material Silver 3 Gold Operation Force.5 N (50 grams)* 3.9 N (90 grams)* 4 3 N (300 grams)* 5 5. N (50 grams)* N (340 grams)** RoHS compliant and compatible. Tin plated. 74 Dimensions are shown: mm

109 KSF & KSFI Series Soft ctuated Tact Switch KSF KSFI 0V 8, 0.44,06, Ø.6 7,4 9,5 Ø 3,5 Ø 0,9 (4 holes) 5,08 Recommended PC (component side) 0,55 x 0,3 7,6 0,55 x 0,3.6 5, x ,4 3,3 7,4 5,08 Dimensions are shown: mm 75

110 KS & KSL Series Sealed Tact Switch Specification Features/enefits Designed for automatic or manual insertion Cambered terminals to ensure self retention Top or side actuated Large choice of caps RoHS compliant and compatible Typical pplications utomotive Industrial Telecommunication networks Electrical Silver Gold CONTCT RRNGEMENT: SPST, N.O. DOULE OVERMOLDING ON TERMINL SELING: IP60 TERMINLS: PC pins, ground pin optional Mechanical ctuation force Operating life Travel to Type N (operations) make KS0M,4 ± 0,4 00,000 0,5 ± 0, KS0M3,4 ± 0,4,000,000 0,5 ± 0, KS0M4 3 ± 0,75 00,000 0,6 ± 0, KS0M5 5 ±,5 00,000 0,7 ± 0, KS0M9 3 ± 0,75 500,000 0,6 ± 0, KSL0M,4 ± 0,4 00,000 0,5 ± 0, KSL0M3,4 ± 0,4,000,000 0,5 ± 0, KSL0M4 3 ± 0,75 00,000 0,6 ± 0, KSL0M5 5 ±,5 00,000 0,7 ± 0, KSL0M9 3 ± 0,75 500,000 0,6 ± 0, NOTE: Other versions in terms of force, termination length and corrosion protection available. Please contact your sales representative. This data sheet does not provide enough information for applications which require a certain level of quality or safety such as automotive, medical systems, safety equipment. Please contact your sales representative to get contractual specification package. MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mv 0 mv MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m m DIELECTRIC STRENGTH: 50 Vrms CONTCT RESISTNCE: 00m Ω INSULTION RESISTNCE (00 V): 0 9 Ω OUNCE TIME: ms Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -40 C to 85 C -55 C to 5 C Process Wave soldering compatible with lead free soldering profile. Packaging Can be delivered in tubes of 65 pieces for automatic insertion or in boxes of 500 pieces for manual insertion (50 pieces for KSL, KSLV, KSV). How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. SWITCH K S L F T ctuator Type Short hard plastic L Long hard plastic Ground Terminal 0 Without With* Insertion M Manual (bulk packaging) utomatic (tube packaging) V Vertical (bulk packaging)* *Note: Ground terminal not compatible with V insertion Contact Material Silver contacts 3 Gold contacts Operation Force.3 N (30 grams), 00,000 operations 3.3 N (30 grams),,000,000 operations 4 3 N (300 grams), 00,000 operations RoHS compliant and compatible. Tin plated. 5 5 N (500 grams), 00,000 operations 9 3 N (300 grams), 500,000 operations UTTONS uttons must be ordered separately and will be supplied in bulk. T N K 0 utton Style K0 0 mm square snap-on K0 ø8 mm round snap-on K03 8,5 x 3,8 mm single floating K04 8,5 x 3,8 mm double floating K05 5 mm square K06 0 x,5 mm snap-on handle K07 5 mm square K08 9,9 x 5 mm rectangular K09 ø6, mm round utton Color 0 Dark gray 0 Light gray 30 Yellow 40 Red 50 Green 60 lue 70 Gray-blue 80 Ivory 90 lack *NOTE: Please note that all buttons are not RoHS compliant. Please check the compliance with your C&K sales representative. Dimensions are shown: mm (inches) 76

111 KS & KSL Series Sealed Tact Switch CTUTOR TYPE KS & KSL ±0,5 (.394±.006),06±0, (.04±.004) 8,±0, (.3±008) Ø 4,8±0,05 (.89±00) Ø 3,0 (.8),±0, (.043±.004),±0, 0,45 (.083±.004) 7,6 ±0, (.30±008) 9±0, (.354±008) 4,±0, H (.65±.008),6±0, (.0±.004) 5,08 ±0, (.0±004) 0,5 x 0,3±0,0 (.0 x.0±.004) 7,4±0, (.9±004) Type H mm inch KS 4,7±0, (.85) KSL 9,9±0, (.390) 7,4 ±0, (.9±004) GROUND TERMINL 0 WITHOUT * WITH *Not compatible with V insertion 77 Dimensions are shown: mm (inches)

112 4,85 (.9) 8,0 (.35) 3,5 (.8),54 (.00) 5,08 (.0) KS & KSL Series Sealed Tact Switch INSERTION M MNUL (ULK PCKGING) 8, (.3) PC LYOUT Ground terminal (option) 0,45 (.08) 7,6 (.30) 9,0 (.354) 4, (.65) 0,5 x 0,3 (.00 x.0) 5,08 (.0) UTOMTIC (TUE PCKGING, 65 PIECES PER TUE) 8,±0, (.3±.008) ø 4,8±0,05 ø 3-0,06 ( ) 0,45 (.08),06±0, (.04±.004) C COURSE RELTIVE 4,7±0, (.85±.008),6 (.0), ±0, (.043±.004) ø0,9+0,/-0,0 ( /-.000) ø 0,9 (.354) 7,6 (.30) 7.6 (.30) PC LYOUT 4,±0, (.65±.008),6 ±0, 9,5 ±0,3 0,5 x 0,3±0,0 (.374±.0) (.00 x.0±.004) 5,08±0, (.0±.004) 5,08 (.0) V VERTICL PC LYOUT 7,6 (.300) ø, (.047) 5,5 (.07) 5,08 (.00) ø0,9 (.035) 5,08 (.0) 7,6 (.300) 9,5 (.374) 0,5 x 0,3 (.00 x.0) 0,8 x 0,3 (.03 x.0) 0,4 (.06),54 (.0) 3,0 (.8) L DIMENSION L Type L mm inch KS0V 5,8.8 KSL0V,.437 OPERTING FORCE OPTION CODE OPERTING FORCE.3 N (30 grams) 00,000 operations 3.3 N (30 grams),000,000 operations N (300 grams) 00,000 operations N (500 grams) 00,000 operations N (300 grams) 500,000 operations 78 Dimensions are shown: mm (inches)

113 0,5 (.00) KS & KSL Series Sealed Tact Switch CONTCT MTERIL OPTION CODE CONTCT MTERIL Silver contacts 3 Gold contacts SELING OPTION CODE SELING Sealing level IP60 UTTONS uttons must be ordered separately and will be supplied in bulk. UTTON TYPE KS KSL KSV KSLV K0 X K0 X K03 X X X X K04 X X X X K05 X X K06 X K07 X X K08 X X K09 X X 0,5+0,/-0,0 ( /-.000) 0,8 (.03) 3,50,05 (.38.00) K0 R 0,3 (.0) 8,0 (.35) K0 4,50, ( ) 3,70, ( ) 8,0 (.35) 3,7 (.46) 4,5 (.77),0 (.039) 4,40, ( ),0 (.039),0 (.039) 8,0 (.35) 4,4 (.73) 0,0 (.394),0 (.039) R 0,5 (.00) 0,0 (.394) 00, ( ) ø8,0+0,0/-0, ( /-.008) 8,0 (.35) 00, ( ) R 0,5 (.00) 79 Dimensions are shown: mm (inches)

114 KS & KSL Series Sealed Tact Switch K03 K04 4,0 (.57) 3,8 (.50) 3,00, (.8.004) 4,0 (.57) R 0, (.008) 9,50, ( ),0+0,05/-0,0 ( /-.000) 9,5 (.768) 8,5 (.78) K05 5,60, (.0.004) K06 3,0 (.8) R 0,3 (.0),0 (.039) 5,6 (.0) 5,6 (.64) 4,5 (.77) 4,5 (.77) 3,7 (.46) 4,5 (.77) 8,74 (.344),0 (.039) 4,4 (.73) 0,0 (.394),0 (.039) 0,0 (.394),5 (.098) 5,0 (.97) K07 5,0 (.97) K08 4,5 (.77) 9,4 (.370) 8,99 (.354) 9,0 (.354) 5,0 (.97) 4,50 (.77) 5,0 (.97) 0,0 (.394) 9,0 (.354) K09 ø4,38 (.7) ø6,3 (.45) 80 Dimensions are shown: mm (inches)

115 KS & KSL MKII Series High Performance Sealed Tact Switch Features/enefits Highest tact switch sealing performance Improved sealing through a modification of the crimping technique and to a double overmolding of the terminal Totally sealed Up to M operations RoHS compliant and compatible Specification CONTCT RRNGEMENT: SPST, N.O. TERMINLS: PC pins SELING: IP65 Double overmold on terminals Mechanical ctuation force Operating life Travel to Type N (grams) (operations) make KS0M,3 ± 0,3 00,000 0,5 ± 0,5 KS0M3,3 ± 0,3,000,000 0,5 ± 0,5 KS0M4 3,5 ± 0,5 00,000 0,6 ± 0,5 KS0M5 5 ±,5 00,000 0,7 ± 0,5 Packaging Delivered in boxes of 500 pieces (50 pieces for KSL) NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Typical pplications utomotive Industrial Telecommunication networks Household appliances Heating control systems Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mv 0 mv MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m m DIELECTRIC STRENGTH: 50 Vrms CONTCT RESISTNCE: 00m Ω INSULTION RESISTNCE (00 V): 0 9 Ω OUNCE TIME: ms Environmental Silver Gold OPERTING TEMPERTURE: 40 C to 85 C 40 C to 5 C STORGE TEMPERTURE: 40 C to 85 C 55 C to 5 C Process Wave soldering compatible with lead free soldering profile. Other versions in terms of force, termination length and corrosion protection available. Please contact your sales representative. This data sheet does not provide enough information for applications which require a certain level of quality or safety such as automotive, medical systems, safety equipment. Please contact your sales representative to get contractual specification package. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local represenative. Type Short hard plastic L Long hard plastic K S 0 Ground Terminal 0 Without Insertion M Manual (bulk packaging) utomatic (tube packaging) L F T Sealing High sealing performance Contact Material Silver contacts 3 Gold contacts Operation Force.3 N (30 grams), 00,000 operations 3.3 N (30 grams),,000,000 operations 4 3 N (300 grams), 00,000 operations 5 5 N (500 grams), 00,000 operations 9 3 N (300 grams), 500,000 operations RoHS compliant and compatible. Tin plated. 8 Dimensions are shown: mm (inches)

116 KS & KSL MKII Series High Performance Sealed Tact Switch TYPE KS & KSL MNUL INSERTION 0,3 8. 3,5,3 4,7, ø 4,8 ÿ3,6 +0, ø 0,9 0 (4x HOLES) Recommended PC (component side) 7, , x 0.3 5,08 6, 6, KS & KSL UTOMTIC INSERTION 0,3 8 3,5,3 4,7, ø 4,8 ø 3,6 4 HOLES ø 0,9 PC LYOUT 9.5 5, x 0.3 6, 6, 7,6 5,08 Dimensions are shown: mm 8

117 Features/enefits Spherical actuator allows actuation force off center ± 30 with regard to vertical RoHS compliant and compatible Designed for mechanisms Compliant side actuation Typical pplications utomotive Cranes, off road, railway Factory automation Security systems KSJ Series Spherical ctuator Tact Switches Specification FUNCTION: Momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. DISTNCE ETWEEN UTTON CENTERS (min.): 7.6 (0.300) TERMINLS: PC pins SELING: IP60 Mechanical Operating life Operating life Type ctuation force (operations) (operations) Travel to N (grams) axial radial make (mm) KSJ0M60SH ± 0,5 00,000 30,000 0,6 ± 0,3 KSJ0M480SH 3,0 ± 0,8 00,000 30,000 0,55 ± 0,5 KSJ0M80SH ± 0,5 00,000 30,000 0,35 ± 0, KSJ0M980SH 3,9 ± 0,8 00,000 30,000 0,7 ± 0,5 Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -40 C to 85 C -55 C to 5 C Packaging Delivered in boxes of 50 pieces. Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mv 0 mv MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m m DIELECTRIC STRENGTH (50 Hz, min.): 50 Vrms CONTCT RESISTNCE: 00m Ω INSULTION RESISTNCE (00V): 0 9 ohms OUNCE TIME: ms Process Wave soldering, compatible with lead free soldering profile. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. This data sheet does not provide enough information for applications which require a certain level of quality or safety such as automotive, medical systems, safety equipment. Please contact your sales representative to get contractual specification package. * Please contact your C&K represenative for any question regarding the product intergration. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed in the table above, please consult your local represenative. K S J S H L F T Ground Terminal 0 Without With* Insertion M Thru-hole V Vertical* Sealing Sealed IP 60 Contact Material Silver contacts 3 Gold contacts Hardness 60SH 60 Shore ctuator 80SH 80 Shore ctuator RoHS compliant and compatible. Tin plated. Operation Force N (00 grams), 00,000 operations 4 3 N (300 grams), 00,000 operations *Note: ground terminal option not available with V version. The bracket for the V version plays this role. 83 Dimensions are shown: mm (inches)

118 4, (.65) 4, (.65) 5,08 (.0) KSJ Series Spherical ctuator Tact Switches KSJ pplication area limits of operating force 60 5, (.05) R, (.087) 60 Recommended direction for a radial actuation 6,65 (.6), (.047) 30 MX 7,6 (.30) 9,0 (.354) 4,7 (.85) 5,08 (.0) 0,5 x 0,3 (.00 x.0) KSJ0M 7,4 (.9) 7,4 (.9) INSERTION M THRU-HOLE V VERTICL 4,850, (.9.004) 3,50, (.8.004) 5,50, ( ) 0,40, ( ) 8,0 (.35) 9,0 (.354) 7,6 (.30) PC LYOUT Ground terminal (option) 5,08 (.0) 0,5 x 0,3 (.00 x.0) 5,080, (.0.008) 7,80,3 (.307.0) 9,50, ( ) PC LYOUT 0,8 x 0,3 (.03 x.0) 0,5 x 0,3 (.00.0),540,3 (.0.0) 6,0 (.36) 7,850, ( ) 0,40,05 (.06.00) ø0,9 (.035) 7,6 (.30) ø,+0,/-0,0 ( /-.000) 5,3 (0.09) 7,6 (.30),54 (.0) 5,08 (.0) ø0,9+0,/-0,0 ( /-.000) 84 Dimensions are shown: mm (inches)

119 PTS635 Series 3,5 mm Tact Switches Features/enefits Compact size 6 x 3.5 mm Variety of switch heights Choice of actuation force RoHS compliant and compatible Typical pplications Consumer products Instrumentation Computer products Industrial Specification FUNCTION: Momentary action CONTCT RRNGEMENT: SPST, N.O. TERMINLS: PC pins Mechanical CTUTION FORCE: PTS635L models: 30 grams. PTS635H models: 00 grams. LIFE EXPECTNCY: 0,000 operations. Electrical CONTCT RTING: 50 V DC. DIELECTRIC STRENGTH: 50 V C min. CONTCT RESISTNCE: 00 mω max. initial. INSULTION RESISTNCE: 0 Ω min. Environmental OPERTING TEMPERTURE: -40 C to 60 C NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Process SOLDERING: Preheating to 00 C for 45 sec. max. Keep flux flush with top surface of PC; do not apply to component side of PC and area where terminals are located. Soldering to 55 C for 5 sec. max. Clean by brushing on solder surface. Do not clean switch with solvents. Materials SE: 6/6 nylon or glass filled polyester (PT) (UL 94V-0). CTUTOR: 6/6 nylon or polyacetal (UL 94H). COVER PLTE: PTS635S and PTS635V models: Tin plated stainless steel DOME CONTCTS: Phosphor bronze, silver clad. STTIONRY CONTCTS: rass, silver plated. TERMINLS: rass, silver plated. Insert molded. Packaging ulk packaging. Tape & reel for: PTS635Sx43SMTR, 700 pcs per reel How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. P T S L F S Termination S Straight V Vertical ctuation Force L 30 grams H 00 grams Insertion Type* NONE Thru hole SMTR Surface mount, tape & reel RoHS compliant and compatible. Silver plated. ctuator Height to PC / Ground Pin 43 4,3 (.69), Thru-hole and SMT 50 5,0 (.97), Thru-hole 3 3,5 (.4), Vertical 39 3,85 (.5), Vertical * SMTR only available with PTS ctuator Height options. 85 Dimensions are shown: mm (inches)

120 PTS635 Series 3,5 mm Tact Switches SERIES PTS635,5 (.059) 0,6 MX. (.05) x 3,0 (.8) "H",6 (.063),5 (.098) 4,3 (.69),4 (.093) 8,50,5 ( ),0 x (.039) 3,5 (.38) 6,5 (.56) 3,5 (.38) 7,9 (.3) For H dimension please refer to chart on next page 6,0 (.36) 3,5 x (.38) TERMINTION,5 4x (.098) 0,3 x (.0),5 x (.098),0 x (.039) "L" 0,3 x (.0) 0,5 x 5,0 (.00) (.97) 7,0 (.76) 0,6 MX. (.05) x For L dimension please refer to chart on next page 3,0 (.8) 7,3 (.87) S STRIGHT V VERTICL,4 8,50,5 (.093) ( ),0 x (.039) 6,5 (.56) 7,9 (.3) 3,5 x (.38),5 4x (.098) 0,3 x (.0),5 x (.098),0 x (.039) 0,3 x (.0) 0,5 x 5,0 (.00) (.97) 7,0 (.76) 6,5 (.56) PC LYOUT ø,3 TYP. (.05),5 (.098) 5,0 (.97) PC LYOUT ø,3 x (.05) ø,0 x (.039) 7,0 (.76) SMT 43 3 (0.8).5 (0.059) 0.3 (0.0) 3.5 (0.38) 4.3 (0.69) 9 (0.354) (0.039) PC LYOUT.4 (0.055) 7.3 (0.87) 0.3 (0.403) 86 Dimensions are shown: mm (inches)

121 PTS635 Series 3,5 mm Tact Switches CTUTION FORCE OPTION CODE L H FORCE 30 grams 00 grams CTUTOR HEIGHT OPTION HEIGHT H or CODE LENGTH L TERMINTION SCHEMTIC 43 4,3 (.69) Thru-hole & SMT 50 5,0 (.97) Thru-hole 3 3,5 (.4) Vertical 39 3,85 (.5) Vertical 3 4 INSERTION TYPE SMTR 43 5,±0, (0,05±0,003) 4,0 (0,57),0 (0,47),0 TYP (0,079) ø,5 (ø0,59),75±0, (0,069±0,003) 7,5 (0,95) 6,0±0,3 (0,63±0,0) DIRECTION OF FEED 87 Dimensions are shown: mm (inches)

122 PTS64 Series SMT Top ctuated Switches Features/enefits 6.3 x 6.3 mm footprint Multiple heights Ground pin option Typical pplications Metering White goods Home and garden equipment Specification FUNCTION: Momentary action CONTCT RRNGEMENT: make contact = SPST N.O. TERMINLS: G type for SMT Mechanical TRVEL: 0.0 mm ±0.5 mm for 60 &50 gf 0.30 mm ±0.5 mm for 30 gf OPERTING LIFE: 00,000 cycles OPERTION FORCE: 60 gf ±50 gf blue actuator 50 gf ±50 gf red actuator 30 gf ±80 gf black actuator Packaging Switches in reels of,500 pieces. Dimensions of reels according to EI 48 External diameter 330 mm Electrical MXIMUM VOLTGE: VDC MXIMUM CURRENT DC: 50 m DIELECTRIC STRENGTH: 50 V C (mn) CONTCT RESISTNCE: 00 m Ω INSULTION RESISTNCE: 00 M Ω OUNCE TIME: < 5 ms Environmental OPERTING TEMPERTURE: -0 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S 6 4 S M T R L F S Ground Pin S No ground pin T With ground pin RoHS compliant, silver plated ctuation Force M 60 gf K 50 gf P 30 gf ody Type 5.5 mm height 3 3. mm height mm height Packaging SMTR Tape & Reel 88 Dimensions are shown: mm

123 PTS64 Series SMT Top ctuated Switches NO GROUND PIN H =.5, 3., or 3.4 mm Ø 3 H 8,4 0,3 3 4 SCHEMTIC 6,4 0,75 4, ,3 6,6,3 3 8,4 4 RECOMMENDED PC LYOUT 4,5 GROUND PIN H =.5, 3., or 3.4 mm Ø 3 H 5 8,4 0,3 3 4 SCHEMTIC 8,4 6,4 0,75 0,75 5 4,5 6,6,3 5 4, ,3 3 RECOMMENDED PC LYOUT 4 89 Dimensions are shown: mm

124 PTS645 Series 6 mm Tact Switches Features/enefits Compact size 6 x 6 mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical pplications Consumer products Instrumentation Computer products Industrial Specification FUNCTION: Momentary action CONTCT RRNGEMENT: SPST, N.O. TERMINLS: PC pins Mechanical CTUTION FORCE: 30 grams, 60 grams, 00 grams, 60 grams LIFE EXPECTNCY: 00,000 operations. Electrical CONTCT RTING: 50 V DC. DIELECTRIC STRENGTH: 50 V C min. CONTCT RESISTNCE: 00 mω max. initial. INSULTION RESISTNCE: 0 Ω min. Environmental OPERTING TEMPERTURE: -0 C to 60 C Process SOLDERING: Preheating to 00 C for 45 sec. max. Keep flux flush with top surface of PC; do not apply to component side of PC and area where terminals are located. Soldering to 55 C for 5 sec. max. Clean by brushing on solder surface. Do not clean switch with solvents. Packaging ulk packaging. Tape & reel for the SMT type: Reels of,000 pieces for 4,3 and 5,0 mm height Reels of 700 pieces for 7,0 mm height Reels of 500 pieces for 9,5 mm height Reels of 400 pieces for 3,0 mm height NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S Termination S Straight T Straight with ESD pin V Vertical ctuator Shape NONE Round actuator, ll versions J Square actuator,.4 mm side THT versions only (No ESD pin - not available with Termination T style ctuation Force L 30 grams M 60 grams H 00 grams K 60 grams L F S Insertion Type Thru hole SMTR9* Surface mount, tape & reel Switch height from PC for S and T only (H dimension see actuator height drawings) 43 4,3 (.69), thru-hole and SMT 50 5,0 (.97), thru-hole and SMT 70 7,0 (.75), thru-hole and SMT 73 7,3 (.87), thru-hole, square actuator.4 mm side only 95 9,5 (.374), thru-hole and SMT 3 3,0 (.5) SMT only RoHS compliant and compatible. Silver plated. *Only the straight type termination without ESD pin is available in SMT type. Switch length from front leads for V only (H dimension see actuator height drawings) 3 3,5 (.4), vertical 39 3,85 (.5), vertical 58 5,85 (.30), vertical 6 6,5 (.4), vertical, square actuator.4 mm side only 83 8,35 (.39), vertical Dimensions are shown: mm 90

125 PTS645 Series 6 mm Tact Switches TERMINTION S STRIGHT 0,5 Max,8 3,45 4,3 ± 0, SCHEMTIC 0,7 4,5 3 T STRIGHT WITH ESD PIN 6 0,7 ± 0, 6 0,5 Max 3,45 4,3 ± 0, SCHEMTIC,8 3, ,5 0,7 0,3 0,7 6,5 7,9 6, ,7± 0, 6 4, 0,3 4 ± 0, 4,5 3 PC LYOUT 5 4, 4x Ø 4 6,5 Ø 3,5 V VERTICL SCHEMTIC Push 7,5 Ø 3,5 x Ø,3 4,5± 0,05 4,05 6, 3,5 0,3 6,5 7, Ø 3,5 4,5 PC LYOUT 3 6,5 4 4x Ø,55 ± 0,05 4,95 4,3 0,7 3,95 0,3,55± 0, x Ø 7±0,05 PC LYOUT 4,5 ± 0,5 4, 3,9± 0, 7 8,5 Dimensions are shown: mm 9

126 PTS645 Series 6 mm Tact Switches TERMINTION SMT FOR 4.3, 5.0, 7.0, 9.5 MM HEIGHT 3.0 MM HEIGHT ONLY (0,3) 0,3-0,0 0 4, Ø 3,5 0,7±0, 3,45 4,3 ±0, 6 0,3-0,0 0 6, 4,5 (0,3) 9 6, 3 4 Ø 3,5 0,7 ± 0, 3,45 3 ±0, 9,5 6,4 SCHEMTIC 5,8 3, PC LYOUT CTUTOR SHPE Ø 3,5,4 7,5 4,3 4xØ0,9 Ø 3,5 4,05 6, 4,3,4 3,85,4,8 SCHEMTIC Push,55 ± 0,05 xø,3 4,5 ±0,05 4,95 4,3 0,7 4,5 6, 7± 0, 3,95 4, 0,4 0,3,55± 0, 6, xø 7± 0,05 RECOMMENDED PC LYOUT 8,5± 0, Dimensions are shown: mm 9

127 PTS645 Series 6 mm Tact Switches CTUTOR SHPE,4,8,6,4 3,85 SCHEMTIC 0,3 Max 7,3 4,5 4,3 3 0,3 6,5 7,9 6 4,3 0,7 ± 0, 4 Ø,5 Ø 3,5 6 3,5,4 4,5 3 4 RECOMMENDED PC LYOUT 4xØ 4 3 6,5 CTUTION FORCE OPTION CODE L M H K FORCE 30 grams lack 60 grams lue 00 grams Gray 60 grams Red CTUTOR HEIGHT Switch height from PC for S and T only OPTION SCHEMTIC CODE DIMENSION H TERMINTION Without EMC pin With EMC pin 0,3-0,0 0 (0,3) H ± 0. 3, ,3 (.69) Thru-hole and SMT 50 5,0 (.97) Thru-hole and SMT 70 7,0 (.75) Thru-hole and SMT 95 9,5 (.374) Thru-hole and SMT 3 3,0 (.5) SMT Switch length from front leads for V only OPTION SCHEMTIC CODE DIMENSION H TERMINTION Without EMC pin With EMC pin 3,95 0,3,55± 0, 4,05 3 3,5 (.4) Vertical 39 3,85 (.5) Vertical 58 5,85 (.30) Vertical 83 8,35 (.39) Vertical 3 4, H ± 0, 93 Dimensions are shown: mm

128 PTS645 Series 6 mm Tact Switches TPE & REEL Cover tape (Polyester) Carrier tape (Polystyrene) Pocket Height Reel (Polystyrene),5 +0, 0 tape 3 Cover 4±0, ±0,,75±0, H 7,4 For 4.3 and 5.0 mm: Height 5.3 mm For 7.0 mm: Height 7.3 mm For 9.5 mm: Height 0.3 mm For 3.0 mm: Height 3.3 mm 6±0,3 ±0, Dimensions are shown: mm 94

129 PTS645 V SMT Series 6 mm SMT Side ctuated Tact Switch Features/enefits Full SMT processing Strong PC soldering pads Compact 6 x 6 mm design Typical pplications Consumer Products Set Top and ccess oxes Instrumentation Home and Garden Equipment Specification FUNCTION: Momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: G type for SMT TRVEL: 0.5 mm +0./-0. mm OPERTING LIFE: 00,000 cycles Mechanical Operating ctuator Color Part Number Force (gf) PTS645 VN3 SMTR9 LFS 00 ± 30 Dark grey PTS645 VM3 SMTR9 LFS 60 ± 50 Yellow green Electrical MXIMUM VOLTGE: V DC MXIMUM CURRENT: 50 m DIELECTRIC STRENGTH: 00 V C (mn) CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: 00 MΩ OUNCE TIME: 0 ms Environmental OPERTING TEMPERTURE: -0 C to 70 C STORGE TEMPERTURE: -30 C to 80 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Recommended solder paste thickness is 5µm Packaging In reels of 650 pieces Dimensions of reels according to EI 48 External diameter 330 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S V S M T R 9 L F S Termination V Vertical ctuation Force M 60 gf N 00 gf ctuator Length 3.3 mm from metal front face Termination SMTR9 Surface mount, tape & reel RoHS compliant and compatible. Silver plated. 95 Dimensions are shown: mm

130 PTS645 V SMT Series 6 mm SMT Side ctuated Tact Switch RECOMMENDED PC LYOUT 6 9,5 7, 6,4,9,9,3,3 (Tolerance ` 0.) RCKET FCE 4,5 7, 0, 6,6 3,7 0,4 Max,5 4,6 SCHEMTIC Cover tape (Polyester) Carrier tape (Polystyrene),5 (8,6) 0,4 4 4` 0, 7 n 3,5, x0,7 4,6,5,3 4,5` 0, 9,5 Reel (Polystyrene) SECTION- Ø,5 +0, 0 4, Dimensions are shown: mm

131 PTS5 Series mm Tact Switches Features/enefits THT and SMT terminations Various heights Snap fit actuator option Typical pplications Consumer products Instrumentation Computer products Industrial Specification FUNCTION: Momentary action CONTCT RRNGEMENT: make contact SPST, N.O. TERMINLS: PC pins for THT and G type for SMT TRVEL: 0.30 mm ± 0.5 mm Mechanical OPERTING LIFE: 00,000 cycles OPERTING FORCE: 80 gf ± gf ± 50 Environmental OPERTING TEMPERTURE: -0 C to 70 C Process SOLDERING: This component is suited to the following methods: Infrared reflow soldering in accordance with IEC for SMT version Wave soldering compatible with lead free soldering profile Packaging Electrical MX VOLTGE: VDC MX CURRENT: 50 m DIELECTRIC STRENGTH: 50 V C (mn) CONTCT RESISTNCE: <00 mω INSULTION RESISTNCE: >00M Ω OUNCE TIME: < 5 ms NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Soldering Style Height Packaging Parts per Packaging THT ll heights Plastic bag 500 SMT 4.3 mm tape & reel 900 SMT 4.3 mm with pegs tape & reel 600 SMT 7.3 mm tape & reel 500 SMT 7.3 mm with pegs tape & reel 500 SMT 8.5 mm tape & reel 500 SMT 8.5 mm with pegs tape & reel 400 SMT mm tape & reel 50 Dimensions of reels according to EI 48. External diameter 330 mm. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. P T S 5 S - L F S Style S Straight, top actuated ctuator Shape NONE Round J Snap fit 73 height only ctuator Force M 80 grams K 50 grams Termination & Packaging NONE THT in bags SMTR SMT in tape & reel Pegs Option NONE no pegs P with pegs - only for SMT version in round and square snap fit actuator (not for switch height) RoHS, silver plated Switch Height mm round actuator mm sqaure snap fit actuator mm round actuator.0 mm round actuator with ribs Other heights with the round actuator are available upon request. Different minimum order quantities than the stand may apply. Dimensions are shown: mm 97

132 PTS5 Series mm Tact Switches THT VERSION WITH ROUND CTUTOR H= 4.3 & 8.5 MM (other height upon request) Ø7 H 0,3,5 3,7 3, holes Ø,3 3 4 SCHEMTIC,5 ±0,05 5 ± 0,05 RECOMMENDED PC LYOUT SMT VERSION WITH ROUND CTUTOR ND PEGS H= 4.3 & 8.5 MM (other height upon request) Ø7 0,3 3,3,5 H xø,5` 0, 5,3 ±0, 0,05 +0, ±0,5 3 4 SCHEMTIC 4,3 ±0,05 3 4,5 5 ±0,05 9 ± 0,05 x Ø RECOMMENDED PC LYOUT 98 Dimensions are shown: mm

133 PTS5 Series mm Tact Switches THT VERSION WITH SQURE SNP FIT CTUTOR H= 7.3 MM 3,8 3 3,3 ± 0,5 Ø 7 3,8 3 0,3,5, 3,7 3,3 7,3 +0,5 0 Ø holes Ø,3 3 4 SCHEMTIC,5 ±0,05 5 ±0,05 RECOMMENDED PC LYOUT SMT VERSION WITH SQURE SNP FIT CTUTOR ND PEGS H= 7.3 MM Ø 7 3,8 3 3,3 ± 0,5 3,8 3 0,3, Ø,5 5,3 ±0,,5 3,3 7,3 +0,5 0 0,05 +0, ±0,5 3 4 SCHEMTIC 4,3 ± 0,05 x Ø 3 4 Ø 5 ± 0,05 9 ± 0,05,5 RECOMMENDED PC LYOUT 99 Dimensions are shown: mm

134 PTS5 Series mm Tact Switches THT VERSION WITH ROUND RIED CTUTOR H=.0 MM Ø 7 Ø 6 Ø4 7,5 6, 0,3,5 3,7 3,3,5± 0, 4 holes Ø,3 3 4 SCHEMTIC,5 ± 0,05 Ø7 Ø 6 Ø4 7,5 6, 0,3 Ø, ± 0,05 RECOMMENDED PC LYOUT 0,3 SMT VERSION WITH ROUND RIED CTUTOR H=.0 MM 3,3 0,3 5,3 ±0, +0,05 0, SCHEMTIC Ø,8 3 4,5± 0,,5 4,3 ±0,05 5 ± 0,05 RECOMMENDED PC LYOUT 00 Dimensions are shown: mm

135 ITS Series Illuminated Tact Switch Features/enefits Vertical and right angle SMT models Vertical and right angle thru-hole models Multiple caps and legends Several LED colors and bi-color options RoHS compliant /compatible Typical pplications Consumer electronics Server/storage Medical devices NEW Right ngle SMT Test/Measurement/Instrumentation udio/video Computers/Peripherals Security Specification FUNCTION: N.O. momentary action TERMINLS: SMT & Thru-hole Mechanical OPERTING FORCE: 60 ± 50gf for V; V; V3; R; R models 0 ± 50 gf for R3 model OPERTING LIFE: 50,000 cycles (50m Ω max) RECOMMENDED OPERTING STROKE: 0.5mm ± 0.mm Electrical RTING: VDC CONTCT RESISTNCE: <00m Ω (initial) DIELECTRIC WITHSTNDING VOLTGE: >50VC (50-60 Hz) between terminals - min.ω INSULTION RESISTNCE: >00M Ω OUNCE TIME: <0ms Packaging Thru-hole: 00 pieces per tray SMT: tape & reel (see V or V3 mounting style drawings) Environmental OPERTING TEMPERTURE: -5 C to +70 C STORGE TEMPERTURE: -5 C to +80 C Process SOLDERILITY: Thru-hole - wave compatible SMT - convection or IR reflow compatible Materials CONTCTS/TERMINLS: DOME: SE: P CTUTOR: P COVER: P ase metal; brass Plating; g ase metal: Phosphor bronze Plating; g Caps Caps are ordered separately and shipped bulk. Thru-hole versions available with caps assembled under custom part number. Contact customer service for details. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. LED I T S F S Color # See color table Color # See color table LED rightness F Standard Mounting Style V Vertical thru-hole V Vertical SMT Gull wing V3 Vertical SMTGull wing with J bend LED R Right angle thru-hole R Right angle thru-hole.5mm leads R3 Right angle SMT Packaging T Tray R Tape & reel Force S Standard actuation force 60 grams: V, V, V3, V3, R, R options 0 grams: R3 option LED Color 00 No light 0 Red Red/Yellow 3 Red/Green 4 Red/lue 0 Yellow Yellow/Red 3 Yellow/Green 30 Green 3 Green/Red 3 Green/Yellow 40 lue 4 lue/red 50 White 60 True green * Other colors available by request 0 Dimensions are shown: mm

136 ITS Series Illuminated Tact Switch LED COLOR / RIGHTNESS Standard LED Color Options LED Characteristic units Red () Yellow () Green (3) lue (4) White (5) True Green (6) Recommended Operating 5VDC 0m 0m 0m 0m 0m 0m Forward Current m 30 m 30 m 30 m 30 m 30 m 30 m Peak Pulsing Current (/8 khz) m 5 m 5 m 5 m 5 m 5 m 5 m Power Dissipation mw 75 mw 75 mw 75 mw 08 mw 08 mw 08 mw Forward 0m Volts.5 Volts Max..5 Volts Max..5 Volts Max. 3.6 Volts Max. 3.6 Volts Max. 3.6 Volts Max. Dominant Wavelength nm 637nm (Typical) 570nm (Typical) 465nm 0m 590nm (Typical) CIE Coordinates 5nm (Typical) Wavelength at Peak X= nm 645nm (Typical) 573nm (Typical) 460nm (Typical) 0m 590nm (Typical) Y= nm (Typical) Spectral Half 0m nm 0nm (Typical) 0nm (Typical) 7nm (Typical) 5nm (Typical) 33nm (Typical) Luminous 0m mcd 50mcd Minimum 5mcd Minimum 40mcd Minimum 00mcd Minimum 50mcd Minimum 500mcd Minimum Viewing ngle at 50% LV (@0m) degrees 50 Typical 0 Typical 0 Typical 0 Typical 50 Typical 0 Typical V - Vertical Thru-hole MOUNTING STYLES ELECTRICL SCHEMTIC COLOR L L DOT SHOWING LED COLOR IS MRKED FOR MINUS POLE SEE SCHEMTIC 4 TCT COLOR LED (7.) X L L ± X (L) 4 P.C.. LYOUT 7.± ±0.3 L L 6.± L 4.5± TRY PCKGING: 00 PIECES L LED TERMINL L IS TRIMMED LONGER THN TERMINL L 0 Dimensions are shown: mm

137 ITS Series Illuminated Tact Switch MOUNTING STYLES V - Vertical SMT; Gullwing 6.8 ELECTRICL SCHEMTIC COLOR TYP 4X ,4 X 45 CHMFER X L ±0.5 4 TCT DOT SHOWING LED COLOR IS MRKED FOR MINUS POLE (CTHODE) SEE SCHEMTIC 6.4 L 4 L 4 COLOR LED L L X X L L P.C..LYOUT X L 3 4 L 7.5 TPE & REEL: 500 PIECES NOTES:. SWITCH WITH TEMPORRY PICK ND PLCE CP. TYP 4 TYP.5 TYP HOLE TYP SECTION - 03 Dimensions are shown: mm

138 ITS Series Illuminated Tact Switch MOUNTING STYLES V3 - Vertical SMT; Gull wing with J bend LED X.8 3 X 6. 7 L X L X 6.3 TYP 4.5 DOT SHOWING LED COLOR IS MRKED FOR MINUS POLE (CTHODE) SEE SCHEMTIC ELECTRICL SCHEMTIC 3 COLOR L P.C.. LYOUT L X L L TCT COLOR LED L L SCLE 3: TPE & REEL: 500 PIECES NOTES:. SWITCH WITH TEMPORRY PICK ND PLCE CP TYP.5 HOLE TYP.75 SECTION TYP Dimensions are shown: mm 04

139 ITS Series Illuminated Tact Switch MOUNTING STYLES R - Right ngle; Thru-hole ELECTRICL SCHEMTIC -- 3 COLOR L L REF ±0.05 TCT DOT SHOWING LED COLOR IS MRKED FOR MINUS POLE (CTHODE) SEE SCHEMTIC.5 COLOR LED 4.5 L 3 6X L TYP L L 0.7 TYP P.C.. LYOUT 3.3 TRY PCKGING: 00 PIECES -- R - Right ngle; Thru-hole.5mm leads DOT SHOWING LED COLOR IS MRKED FOR MINUS POLE (CTHODE) SEE SCHEMTIC L TYP 5X TYP 3 4 L P.C..LYOUT 4.5 ELECTRICL SCHEMTIC.7 3 L 4 3 COLOR 4 L L 0 4 L TCT COLOR LED TRY PCKGING: 00 PIECES Dimensions are shown: mm 05

140 ITS Series Illuminated Tact Switch MOUNTING STYLES R3 - Right ngle, SMT 7,7 4 6,7 ELECTRICL SCHEMTIC COLOR 4, 3,6,7 3,4 6,5 TCT L 4X 0,5 COLOR LED L X, HOLE 6, 3,45 L L 0,9,8 4 0,8 4,4 X 0,5 4X 0,55 3X,5 5,8 6,5 X 0,5 4X,65 4X 0,85 3X,5 6,5 PC RECOMMENDED TPE & REEL: 500 PIECES 4,5 HOLE,5,75,5 4 7, +0, 0 5, +0, 0 74, 8, ( 3) (5) (,) ( 00), 3, 3, ,5,5 6,5 +0, 0 SECTION - ( 330) REEL SCLE :4 7, SECTION - 06 Dimensions are shown: mm

141 ITS Series Illuminated Tact Switch FORCE OPTION CODE S FORCE Standard 60 gf - V, V, V3, R, R options 0 gf - R3 option CPS Use the individual ordering code for each cap 399E0000 Round cap, clear E Material Polycarbonate - Natural/Clear Marking 00 No marking Marking Color 0 No marking Paint Color 0 No paint R X 0. WIDTH P X R0.4 DETIL SCLE 5: 8 ECH SEE DETIL SECTION Dimensions are shown: mm

142 ITS Series Illuminated Tact Switch CPS 400E E EC0E Natural/clear Translucent white, flat edge Matte silver paint laser etch, flat edge E Material Natural/Clear - polycarbonate Translucent white - polycarbonate C Silver paint laser etch - polcarbonate Paint Color 0 No paint Matte silver Laser Etch Marking 00 No marking 0 Power On/Off 04 rrow right 05 rrow left 06 rrow up 07 rrow down 09 Power 33 rrow up (fill) 34 rrow down (fill) 97 I/O Marking Color 0 No marking E Laser etch (painted caps only) ITSXXFRST & 400EC0E cap R0. 400EC0E SHOWN 6.3±0.05 R0. 0.9± SECTION -.3±0.05 4X 0.8 X.8 400E cap dimensions shown are as molded (no paint). R0. TYP X 3.6 X Dimensions are shown: mm

143 ITS Series Illuminated Tact Switch CPS 4 0 E 40EC06E Matte silver paint, laser etch, tall oval Material Natural/clear - polycarbonate Translucent white - polycarbonate C Paint laser etch - polycarbonate Paint Color 0 No paint Matte silver 7.5 Laser Etch Marking 00 No marking 06 rrow up 07 rrow down 33 rrow up (fill) 34 rrow down (fill) Marking Color 0 No marking E Laser etch (painted caps only) ±0.05 SECTION - X X X.8 X E cap dimensions shown are as molded (no paint). 09 Dimensions are shown: mm

144 KSH Series Soft Feeling High Tactile SMT Top ctuated Features/enefits 6.3 x 6.3 x 5.0 mm footprint Low contact resistance High number of cycles or 4 pin PC layout Typical pplications utomotive Interior Car V equipment Electronic musical instrument Specifications FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST N.O. TERMINLS: J type for SMT TRVEL:.3 ± 0. mm Mechanical Operating Operating Life Part Number Force (N) (operations) KSH XJ 50 LFS.6 ± ,000 KSH XJ 50 LFS.0 ± ,000 KSH X3J 50 LFS.5 ± ,000 KSH X4J 50 LFS 3.0 ±.0 00,000 KSH X5J 50 LFS 3.5 ±. 00,000 Environmental OPERTING TEMPERTURE: -40 C to 90 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of,000 pieces Dimensions of reels according to EI 48 External diameter 330 mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Electrical MXIMUM / MINIMUM VOLTGE: VDC / VDC MXIMUM / MINIMUM CURRENT DC: 50 m / 0 µ DIELECTRIC STRENGTH: 50 V C (mn) CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: 00 MΩ OUNCE TIME: 0 ms How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. For any part number different from those listed above, please consult your local representative. K S H J 5 L F S Termination SMT Leads 4 SMT Leads ctuation Force.6 N.0 N 3.5 N N N Contact Plating Silver Termination Style J Leads Height mm LFS RoHS, silver plated 0 Dimensions are shown: mm

145 KSH Series Soft Feeling High Tactile SMT Top ctuated KSH Recommended Layout 7, ± 0,3 9 5,3,6 KSH4 6,3 ± 0, 5 3,5 3,9 6,3 ± 0, 3,9 ± 0,3,4 Circuit Diagram Recommended Layout 7, ± 0,3, 9,5 6,3 ± 0, 5 3,9 3,5 6,3 ± 0, 3,9 4 3 ` 0,3 4,4 0,8 0,8 Circuit Diagram 4 3 4, 8,4 ± 0, 8,63 ± 0, SECTION - 5,3 ± 0,5 0,4 ± 0,05 3 6,6 7,7 SECTION - 6,6 0,7 4 ± 0, Ø,5 +0, 0 7,5 ± 0,,75 ± 0, 6 +0,3-0, 4 REELING DIRECTION OUT OF PRODUCTION,5 Ø,5 +0, 0 SEE DETIL R Dimensions are shown: mm

146 KXT Series Double ction Ultra Low Profile Top ctuated Features 3.9 x 3.0 mm footprint.05 mm thickness Dual action Typical pplications Wearable electronics Mobile Phones Portable Electronics Specification FUNCTION: momentary action CONTCT RRNGEMENT: Dual action = SPDT, N.O. TERMINLS: G type for SMT TRVEL: 0. mm ± 0.05 mm TRVEL: 0. mm + 0. / mm Mechanical Operating force gf Operating Life KXT LHS Push force 00 ± 40 00,000 Push force 00 ± 50 Electrical MXIMUM VOLTGE: MXIMUM CURRENT DC: DIELECTRIC STRENGTH: CONTCT RESISTNCE: INSULTION RESISTNCE: OUNCE TIME: VDC 50 m 50 V (50 Hz, min.) 500 mω 00 MΩ 0 ms Environmental OPERTING TEMPERTURE: -40 C to 85 C STORGE TEMPERTURE: -40 C to 85 C Process SOLDERING: This component is suited to the following methods: Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 6,000 pieces Dimensions of reels according to EI RS48 or IEC 863 External diameter 78 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Part Number Description For any part number different from those listed above, please consult your local representative. K X T L H S LHS Lead free, RoHS, Halogen Free, Silver plated Contact Material Silver Dimensions are shown: mm

147 KXT Series Double ction Ultra Low Profile Top ctuated 4 SCHEMTIC FREE 3 4,05 (0,7),,7 7 0,8 3, 4 3,7 3,9 0,05 3 st CTION (00gf) nd CTION (00gf), ,4,9,7,3 3, RECOMMENDED PC LYOUT Cover tape (Polyester) Carrier tape (Polystyrene),5 +0, 0 5,5 0, 3 (,4) Reel (Polystyrene) 4 9,3 Cover tape, CRRIER TPE 0,5 3 0,5 (/) REEL, ,4 Max 3 Dimensions are shown: mm

148 KMR 6 Series Microminiature SMT Top ctuated IP67 Features/enefits Watertight IP67 Standard and long life versions No ground pin Ultra low current capabilities Excellent tactile feel Specification FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: Gullwing type for SMT Mechanical Type NG See description below Operating force N (grs) Operating life (cycles) Typical pplications utomotive Medical Consumer Industrial Travel (mm) KMR6NG LFS. (0) ± , mm ± 0. KMR6NG ULC LFS. (0) ± , mm ± 0. KMR63NG LFG. (0) ± , mm ± 0. KMR63NG ULC LFG. (0) ± , mm ± 0. KMR6NG LFS.0 (00) ± , mm ± 0. KMR6NG ULC LFS.0 (00) ± , mm ± 0. KMR63NG LFG.0 (00) ± , mm ± 0. KMR63NG ULC LFG.0 (00) ± , mm ± 0. KMR63NG LFS 3.0 (300) ± , mm ± 0. KMR63NG ULC LFS 3.0 (300) ± , mm ± 0. KMR63NG LFS 3.0 (300) ± , mm ± 0. KMR63NG ULC LFS 3.0 (300) ± , mm ± 0. KMR633NG LFG 3.0 (300) ± , mm ± 0. KMR633NG ULC LFG 3.0 (300) ± , mm ± 0. KMR64NG LFS 4.0 (400) ±.00 00, mm ± 0. KMR64NG ULC LFS 4.0 (400) ±.00 00, mm ± 0. KMR64NG LFS 4.0 (400) ±.00 00, mm ± 0. KMR64NG ULC LFS 4.0 (400) ±.00 00, mm ± 0. KMR643NG LFG 4.0 (400) ±.00 00, mm ± 0. KMR643NG ULC LFG 4.0 (400) ±.00 00, mm ± 0. Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mvdc 0 mvdc MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m* m* DIELECTRIC STRENGTH: 50 Vrms CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: GΩ OUNCE TIME: 3 ms *For ULC version minimum current is µ at.8 VDC Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Process Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 7,000 pieces External diameter 330 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TCTILE FEELING: KMR 6 series with actuation force in N - 3N - 4N: 30% KMR 6 series with actuation force in.n: 0% Part Number Description For any part number different from those listed above, please consult your local representative. K M R 6 N G Total height 6,9 mm LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated ctuation Force. N (0 grams) N (00 grams) 3 3 N (300 grams) 4 4 N (400 grams) Contact Material Silver Silver long life* 3 Gold Grounding option NG No Ground pin Low Current capability Void Under standard specification ULC Low current * Silver long life is available in 3N and 4N actuation force. For other versions, please contact Customer Service. 6 may 6 4 Dimensions are shown: mm

149 KMR 6 Series Microminiature SMT Top ctuated IP67, 3,,7,6, 0,6,6 KMR 6 Series -.9 mm height PC layout shown with ground pin option,4,9 4,6 4,,8,45 0,55 0,6 0,6 5 TPE & REEL DE-REELING DIRECTION OUT OF THE TPE SECTION max,3 ± 0,,75 4 ± 0, ± 0,05 ø,5 ± 0, +0,3-0, 5,5 ± 0,05 4,95 ± 0, 0,9 ± 0,0 6 0 max GROUND TERMINL ø,5 +0,5 0 3,03 ± 0, DIRECTION OF FEED 6 may 6 5 Dimensions are shown: mm

150 KMR 7 Series Microminiature SMT Top ctuated IP67 Features/enefits Watertight IP67 Standard and long life versions No ground pin Ultra low current capabilities Excellent tactile feel Typical pplications utomotive Medical Consumer Industrial Specification FUNCTION: momentary action CONTCT RRNGEMENT: make contact = SPST, N.O. TERMINLS: Gullwing type for SMT Mechanical Type NG See description below Operating force N (grs) Operating life (cycles) Travel (mm) KMR7NG LFS. (0) ± , mm ± 0. KMR7NG ULC LFS. (0) ± , mm ± 0. KMR73NG LFG. (0) ± , mm ± 0. KMR73NG ULC LFG. (0) ± , mm ± 0. KMR7NG LFS.0 (00) ± , mm ± 0. KMR7NG ULC LFS.0 (00) ± , mm ± 0. KMR73NG LFG.0 (00) ± , mm ± 0. KMR73NG ULC LFG.0 (00) ± , mm ± 0. KMR73NG LFS 3.0 (300) ± , mm ± 0. KMR73NG ULC LFS 3.0 (300) ± , mm ± 0. KMR73NG LFS 3.0 (300) ± , mm ± 0. KMR73NG ULC LFS 3.0 (300) ± , mm ± 0. KMR733NG LFG 3.0 (300) ± , mm ± 0. KMR733NG ULC LFG 3.0 (300) ± , mm ± 0. KMR74NG LFS 4.0 (400) ±.00 00, mm ± 0. KMR74NG ULC LFS 4.0 (400) ±.00 00, mm ± 0. KMR74NG LFS 4.0 (400) ±.00 00, mm ± 0. KMR74NG ULC LFS 4.0 (400) ±.00 00, mm ± 0. KMR743NG LFG 4.0 (400) ±.00 00, mm ± 0. KMR743NG ULC LFG 4.0 (400) ±.00 00, mm ± 0. Electrical Silver Gold MXIMUM POWER: V 0. V MXIMUM VOLTGE: 3 VDC 3 VDC MINIMUM VOLTGE: 0 mvdc 0 mvdc MXIMUM CURRENT: 50 m 0 m MINIMUM CURRENT: m* m* DIELECTRIC STRENGTH: 50 Vrms CONTCT RESISTNCE: 00 mω INSULTION RESISTNCE: GΩ OUNCE TIME: 3 ms *For ULC version minimum current is µ at.8 VDC Environmental Silver Gold OPERTING TEMPERTURE: -40 C to 85 C -40 C to 5 C STORGE TEMPERTURE: -55 C to 85 C -55 C to 5 C Process Infrared Reflow Soldering in accordance with IEC6760- Packaging In reels of 6,000 pieces External diameter 330 mm ± mm NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. TCTILE FEELING: KMR 7 series with actuation force in N - 3N - 4N: 5% KMR 7 series with actuation force in.n: 0% Part Number Description For any part number different from those listed above, please consult your local representative. K M R 7 N G Total height 7,5 mm LFS Lead free compatible, silver plated LFG Lead free compatible, gold plated ctuation Force. N (0 grams) N (00 grams) 3 3 N (300 grams) 4 4 N (400 grams) Contact Material Silver Silver long life 3 Gold Grounding option NG No Ground pin Low Current capability Void Under standard specification ULC Low current * Silver long life is available in 3N and 4N actuation force. For other versions, please contact Customer Service. 6 may 6 6 Dimensions are shown: mm

151 , 3,,7,6,,45 0,55 0,6,6 KMR 7 Series Microminiature SMT Top ctuated IP67 KMR 7 Series -.5 mm height PC layout shown with ground pin option,8 0,6,5 0,6 4,6 4,,4 5 TPE & REEL DE-REELING DIRECTION OUT OF THE TPE SECTION max,75 ± 0,,75 4 ± 0, ± 0,05 ø,5 ± 0, +0,3-0, 5,5 ± 0,05 4,95 ± 0, 0,9 ± 0,0 6 0 max GROUND TERMINL 3,03 ± 0, 6 may 6 7 Dimensions are shown: mm

152 Toggles Product Selection Guide Toggles Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws SPDT, DPDT, 3PDT, 4PDT SPDT, DPDT, SPDT, DPDT, 3PDT SPST, SPDT, DPDT SPST, SPDT, DPDT SPST, SPDT, DPST, DPDT DPDT Maximum Current Silver/Gold 5 mps 5 mps 7.5 mps/ 5 mps 3 mps/ mps 3 mps/ mps 0.4 V 0 mps Process Sealed PC Mount Options Vertical Right ngle Vertical Right ngle Surface Mount Options Vertical Right ngle Panel Mount Options Rear Mount Termination Options PC Thru-hole Wire Wrap Solder Lug Quick Connect Other vailable Options Support rackets Snap-in Retention ESD Protection Tape & Reel ushing Options 0-48 /4-40 F Toggle 5/3 M6P 0.75 (Metric) Page No. F 3 F 7 F F 30 F 37 F 43 F 48 F Dimensions are shown: Inches (mm)

153 7000 Series Miniature Toggle Switches Features/enefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical pplications Telecommunications Instrumentation Medical equipment Specifications CONTCT RTING: contact material: 0.4 V 0 V C or DC max. Q contact material: 5 0 V C or 8 V DC; 50 V C. See page F-5 for additional ratings. ELECTRICL LIFE: 7X0 and UX models: 00,000 make-and-break cycles at full load. ll other models: 40,000 cycles. CONTCT RESISTNCE: elow 0 m Ω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH: 000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 85ºC. SOLDERILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). For materials see page F-4. NOTE: ny models supplied with P, S R, Q, or G contact material are RoHS compliant and compatible. NOTE: Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. uild--switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages F 4 thru F 6. For additional options not shown in catalog, consult our Customer Service Center. Switch Function 70 SP On-None-On 703 SP On-Off-On 705 SP Mom.-Off-Mom. 707 SP On-Off-Mom. 708 SP On-None-Mom. 709 SP None-On-Mom. 70 DP On-None-On 703 DP On-Off-On 705 DP Mom.-Off-Mom. 707 DP On-Off-Mom. 708 DP On-None-Mom. 7 DP On-On-On 73 DP On-On-Mom. 75 DP Mom.-On-Mom P On-None-On P On-Off-On P Mom.-Off-Mom P On-None-Mom P On-None-On P On-Off-On P Mom.-Off-Mom P On-None-Mom. 74 4P On-On-On 743 4P On-On-Mom P Mom.-On-Mom. Note: UL models available, see pages F-4 & F-5. ctuator M.00" high P3 Flatted, anti-rotation,.450" high S.40" high T.687" high, 5/3 bushing K Locking lever,.704" high K9 Locking lever,.704" high K Locking lever,.73" high K9 Locking lever,.73" high L.840" high L.640" high LP nti-rotation,.640" high L.550" high LP nti-rotation,.550" high L3 Plastic.940 inch L40 Lever handle without cap L4.53" high lever handle with cap L4.838" high lever handle with cap MP nti-rotation,.00" high P Flatted, anti-rotation,.840" high P4 Flatted, anti-rotation,.50" high SP nti-rotation,.40" high T.487" high, 5/3 bushing TP nti-rotation,.487" high, 5/3 bushing TP Flatted, anti-rotation,.60 high, 5/3 bushing, TP nti-rotation,.687" high, 5/3 bushing ushing D.80 high, keyway H.96 high, flat Y.350 high, keyway NONE No bushing choice required CW Splashproof D8.80" high, flat D9.80" high, keyway H3.35" high, keyway H4 8mm high, keyway Y.378" high, keyway Y3 8.9mm high, keyway Y4.378" high, flat Y9.350" high, keyway Terminations Right angle, PC thru-hole V Vert. right angle, PC thru-hole C PC Thru-hole V3.460 high, V-bracket Z Solder lug Right angle, PC thru-hole 3 Right angle, PC thru-hole 4 Right angle, PC thru-hole W Right angle, extended, PC thru-hole W4 Right angle, extended, PC thru-hole V.555" high, V-bracket V4.630" high, V-bracket V6.460" high, V-bracket V7.630" high, V-bracket V8.953" high, V-bracket V9.50" high, V-bracket W V.555" high, snap-in V-bracket V3.460" high, snap-in V-bracket V4.630" high, snap-in V-bracket V7.630" high, snap-in V-bracket V8.953" high, snap-in V-bracket Contact Material Gold Seal P Gold, matte-tin E Epoxy Q Silver I Epoxy potted S Silver, matte-tin base G Gold over silver R Gold over silver, matte-tin ctuator Color/Finish NONE right chrome lack 3 Red S Satin chrome KXX ctuator Color/Finish NONE Natural aluminum lack anodized aluminum 3 Red anodized aluminum 7 lue anodized aluminum.750" long, wire wrap W.964" long, wire wrap W3.45" long, wire wrap W4.06" long, wire wrap W5.305" long, wire wrap Z3 Quick connect ushing Finish NONE Nickel on all bushings (except D8, satin chrome) lack F Toggle F 3 Dimensions are shown: Inches (mm)

154 7000 Series Miniature Toggle Switches Materials CSE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DP) (UL 94V-0). CTUTOR: rass, chrome plated. USHING: rass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: rass or steel, tin plated. END CONTCTS: contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page F-5 for additional contact materials. CENTER CONTCTS & LL TERMINLS: contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See above for additional contact materials. TERMINL SEL: Epoxy. HRDWRE: Nut & Locking Ring: rass, nickel plated. Lockwasher: Steel, nickel plated. NOTE: Materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. SWITCH FUNCTION SWITCH FUNCTION POS. POS. POS. 3 CONNECTED TERMINLS POS. POS. POS. 3 NO. POLES MODEL NO. UL** MODEL NO. SCHEMTIC 70 U ON NONE ON -3 N/ U3 ON OFF ON SP U5 U7 MOM. OFF MOM. ON OFF MOM. -3 OPEN U8 ON NONE MOM. -3 N/ U9 NONE ON MOM. N/ -3 - SPDT SPDT /4-40 UNS- KEYWY Part number shown: 70SYZE Terminal Numbers For Reference Only 70 U ON NONE ON -3,5-6 N/ -, U3 ON OFF ON 705 U5 MOM. OFF MOM. -3,5-6 OPEN -,5-4 DP U7 U8 ON OFF MOM. ON NONE MOM. -3,5-6 N/ -,5-4 7 * U* ON ON ON 73* U3* ON ON MOM. -3,5-6 -3,5-4 -,5-4 75* U5* MOM. ON MOM. DPDT DPDT /4-40 UNS- KEYWY F Toggle Part number shown: 70SYZQE MOM. = Momentary * Wiring for 3-way switch, see Section N. Terminal Numbers For Reference Only ** U U45 model nos. with all options when ordered with G, R, Q or S contact material. Dimensions are shown: Inches (mm) F 4

155 7000 Series Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. POS. POS. 3 CONNECTED TERMINLS POS. POS. POS. 3 NO. POLES MODEL NO. UL** MODEL NO. SCHEMTIC 730 U3 ON NONE ON -3,5-6,8-9 N/ -,5-4, U33 ON OFF ON 3P 7305 U35 MOM. OFF MOM. -3,5-6,8-9 OPEN -,5-4, U37 ON OFF MOM U38 ON NONE MOM. -3,5-6,8-9 N/ -,5-4,8-7 3PDT 3PDT /4-40 UNS- KEYWY Part number shown: 730SYZQE Terminal Numbers For Reference Only 740 U4 ON NONE ON -3,5-6,8-9,- N/ -,5-4,8-7, U43 ON OFF ON 7405 U45 MOM. OFF MOM. -3,5-6,8-9,- OPEN -,5-4,8-7,-0 4P * U48 U4* ON NONE MOM. ON ON ON -3,5-6,8-9,- N/ -,5-4,8-7,-0 743* U43* ON ON MOM. -3,5-6,8-9,- -3,5-4,8-9,-0 -,5-4,8-7,-0 745* U45* MOM. ON MOM. 4PDT 4PDT /4-40 UNS- KEYWY Part number shown: 740SYZQE Terminal Numbers For Reference Only MOM. = Momentary Wiring for 3-way switch, see Section N. ** U U45 model nos. with all options when ordered with G, Q, R or S contact material. F Toggle Dimensions are shown: Inches (mm) F 5

156 7000 Series Miniature Toggle Switches CTUTOR CTUTOR CTUTOR FINISH S.40" HIGH M.00" HIGH L, L, L.840",.640",.550" HIGH SP NTIROTTION,.40" HIGH,3 MP NTIROTTION,.00" HIGH,3 LP, LP NTIROTTION,.840",.640",.550" HIGH,3 * * *DIM. OPTION CODE DIM L.840 (,34) L, LP.640 (6,6) L, LP.550 (3,97) S actuator standard when ordered with C, W-W5, Z & Z3 terminations. Caps are available separately, see page F-6. M actuator standard when ordered with all terminations except C, W-W5, Z & Z3. Caps are available separately, see page F-6. Caps are available separately, see page F-6. *P FLTTED WITH NTIROTTION,.840" HIGH,3 *P3 FLTTED WITH NTIROTTION, *P4 FLTTED WITH NTIROTTION,.50" HIGH.450" HIGH,3,3 * * * *Dress nut part number supplied standard with threaded bushing. (Part number with metric threaded bushings.) T.687 (7,45) HIGH, T.487 (,37) HIGH, TP TP NTIROTTION,.487 (,37) HIGH, NTIROTTION,.687 (7,45) HIGH, 5/3 USHING,,3 5/3 USHING,,3 TP FLTTED, NTIROTTION,.60" HIGH, 5/3 USHING,,3.687 (7,45) 5/3-3 UNS-.487 (,37) 5/3-3 UNS- 5/3-3 UNS-.448 (,38) ushing option code not required unless CW splashproof bushing ordered. TP & TP actuators not available with CW splashproof bushing. ll TXX actuators not available on single pole models with -4, W-W4 terminations. ushing option code not required. TP actuator not available with CW splashproof bushing or single pole models with -4, W-W4 terminations. F Toggle L, L, L, M, S & TXX actuators not available with Y bushing. LP, LP, MP, P, P3, P4, SP & TXX actuators not available with D8 & H4 bushing. 3 ntirotation: Provides anti- push-in feature on actuator. * dd.070 (,78) for D, D8 & D9 bushings, subtract.00 (0,5) for H3 bushing. OPTION CODE CTUTOR FINISH NONE RIGHT CHROME-With Nickel Plated ushing LCK S STIN CHROME NOTE: lack hardware is supplied when either black actuators or bushings are specified. For additional hardware, see Section N. Dimensions are shown: Inches (mm) F 6

157 7000 Series Miniature Toggle Switches CTUTOR CTUTOR CTUTOR FINISH/COLOR K K9 LOCKING LEVER,.704" HIGH (threaded) LOCKING LEVER,.704" HIGH (unthreaded) K K9 LOCKING LEVER,.73" HIGH (threaded) LOCKING LEVER,.73" HIGH (unthreaded) * * OPTION CODE CTUTOR CP FINISH NONE NTURL LUMINUM With Nickle Plated ushing LCK NODIZED LUMINUM 3 RED NODIZED LUMINUM 7 LUE NODIZED LUMINUM * ll KXX models including KXXCW have a keyway Replaces K, K8 Replaces K, K8 Locking Positions NOTE: To prevent accidental actuation, toggle must be lifted before being actuated. When released, toggle will lock in place. Overtightening mounting nut may cause actuator to bind. Locking levers supplied with bushing shown. 0 Models Position lock 03 & Models 3 Position lock 05, 09 & 5 Models Position lock 07 & 3 Models Position lock 08 Models Position lock ushing option code not required unless CW splashproof bushing ordered. L40 LEVER HNDLE WITHOUT CP L4 PLSTIC LEVER HNDLE WITH NTIROTTION ND CP, P/N 480 L4 PLSTIC LEVER HNDLE WITH NTIROTTION ND CP, P/N 48 L3 No color choice required PLSTIC.940 HIGH Finish: Matte (L4 & L4). * Gloss Plastic OPTION CODE NONE PLSTIC CTUTOR COLORS No ctuator Color (L40 option) Chrome Finish LCK 3 RED F * dd.070 (,78) for D, D8 & D9 bushings, subtract.00 (0,5) for H3 bushing. NOTE: Lever handle for L4 & L4 actuators supplied, but not installed. For interchangeability, order L40 actuator option and lever handles separately, see page F-6. L4X actuators not available with H4, Y, Y4 bushings. ntirotation: Provides anti- push-in feature on actuator. Toggle Dimensions are shown: Inches (mm) F 7

158 7000 Series Miniature Toggle Switches USHING USHING USHING FINISH Y Y9.350" HIGH, THREDED, KEYWY.350" HIGH, UNTHREDED, KEYWY NONE NO USHING No bushing choice required with KXX, TXX actuators. (exception: Specify CW if splashproof bushing desired). D D8 D9.80" HIGH, THREDED, KEYWY.80" HIGH, UNTHREDED, FLT 3.80" HIGH, UNTHREDED, KEYWY H.96" HIGH, FLT H3.35" HIGH, KEYWY THREDED, HIGH TORQUE, THREDED, HIGH TORQUE, /4-40 UNS- D8 D, D9 /4-40 UNS- /4-40 UNS- /4-40 UNS- Y bushing standard with C, W-W5, Z or Z3 terminations. D9 bushing standard with all terminations except C, W-W5, Z or Z3. dd.070 (,78) to all actuators lengths with D, D8 & D9 bushings. Subtract.00 (0,5) from all actuator lengths for H3 bushing. H4 8mm HIGH, KEYWY, THREDED, Y.378" HIGH, KEYWY, THREDED, Y3 8.9mm HIGH, KEYWY, METRIC HIGH TORQUE,,3 HIGH TORQUE,,4 THREDED, METRIC Y4.378" HIGH, FLT, THREDED, HIGH TORQUE,,5 /4-40 UNS- /4-40 UNS- CW THREDED, SPLSHPROOF, For T & T actuators. For actuators other than T, T and KXX. OPTION CODE NONE USHING FINISH NICKEL on all bushings except D8 satin chrome. LCK 5/3-3 UNS- /4-40 UNS- Will withstand in.-lbs. of torque with no distortion. CW. H, H3, H4, Y & Y4 bushings not available on single pole models with 4 terminations. 3 D8 & H4 bushings available only with L, L, L, M & S actuators. IP67 Degree of protection, totally protected against dust, full-scale voltage protection, temporary immersion. Internal actuator seal standard. External bushing seal available separately from PM Hexseal, part # MFS IP67 Degree of protection, totally protected against dust, full-scale voltage protection, temporary immersion. Internal actuator seal and external bushing seal washer standard. IP65 degree of protection for LXP, MP, PX or SP with CW option. 4 Y bushing available only with LXP, MP, PX & SP actuators. 5 Y4 bushing not available with L4X actuators. NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. lack hardware is supplied when either black bushings or actuators are specified. Optional mounting nut and locking ring styles and finishes available, see Section N. PNEL MOUNTING /4 INCH USHING METRIC USHING 5/3 INCH USHING F Toggle Without locking ring. With standard locking ring. With small locking ring. Without locking ring.with locking ring. Without locking ring. With standard locking ring. Dimensions are shown: Inches (mm) F 8

159 7000 Series Miniature Toggle Switches TERMINTIONS Z SOLDER LUG C PC THRU-HOLE PC MOUNTING.030 (0,76) Thk. SPDT thru 4PDT Not available with P, R or S contact materials. SPDT thru 4PDT Z3 QUICK CONNECT W, W, W3, W4, W5 WIRE WRP Dim '' OPTION CODE DIM W.750 (9,05) W.964 (4,48) W3.45 (0,80) SPDT thru 4PDT.030 (0,76) Thk. Not available with P, R or S contact materials. Mating quick connector available, order part number , page F-6. SPDT thru 4PDT.030 (0,76) Thk. W4.06 (6,97) W5.305 (33,5) RIGHT NGLE, PC THRU-HOLE ctuator Shown In Pos. SECTION - Terminal Nos. For Reference Only 70MD9E Horizontal ctuation SPDT Switch support with CW, H, H3, H4, Y, Y4 bushings and KXX actuators. Part No. Shown: 70MHE 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE W, W4 RIGHT NGLE, EXTENDED, PC THRU-HOLE PC MOUNTING OPTION CODE DIM Dim '' W.7 (8,3) W4.83 (,) F Not available with I seal option. Terminal bend radii and lead-in manufacturing option. Toggle Dimensions are shown: Inches (mm) F 9

160 7000 Series Miniature Toggle Switches TERMINTIONS RIGHT NGLE, PC THRU-HOLE 70MD9E Horizontal ctuation DPDT ctuator Shown In Pos. Terminals & Support SECTION - 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE W, W4 RIGHT NGLE, EXTENDED, PC THRU-HOLE PC MOUNTING OPTION CODE DIM DIM '' W.40 (0,) W4.50 (,7).33 (8,4) Not available with I seal option. Terminal bend radii and lead-in manufacturing option. RIGHT NGLE, PC THRU-HOLE 730MD9E Horizontal ctuation 3PDT ctuator Shown In Pos. Terminals & Support SECTION - W4 RIGHT NGLE, EXTENDED, PC THRU-HOLE PC MOUNTING F.8 (4,6) Toggle Not available with I seal option. Terminal bend radii and lead-in manufacturing option..33 TYP. (8,4) Dimensions are shown: Inches (mm) F 0

161 7000 Series Miniature Toggle Switches TERMINTIONS RIGHT NGLE, PC THRU-HOLE,.56" PITCH PC MOUNTING Terminals & Support ctuator Shown In Pos. 70MHE Horizontal ctuation SPDT Switch support with CW, H, H3, H4, Y, Y4 bushings and KXX actuators. Not available with TXX actuators and I seal. Part No. Shown: 70MHE Terminal bend radii and lead-in manufacturing option. 4 RIGHT NGLE, PC THRU-HOLE.56" PITCH PC MOUNTING ctuator Shown In Pos. Not available with KXX & TXX actuators, CW, H, H3, H4, Y & Y4 bushings, and I seal. Terminal bend radii and lead-in manufacturing option. 70MD94E Horizontal ctuation SPDT NOTE: The 4 option is available with any contact material and can be UL recognized and CS certified. The PC pattern must clear switch support legs. V VERTICL RIGHT NGLE, PC THRU-HOLE,.50" PITCH PC MOUNTING ctuator Shown In Pos. Not available with I seal option. Terminal bend radii and lead-in manufacturing option. SECTION - 70MD9VE Horizontal ctuation SPDT V VERTICL RIGHT NGLE, PC THRU-HOLE,.50" PITCH PC MOUNTING 70MD9VE Vertical ctuation DPDT F ctuator Shown In Pos. Not available with I seal option. Terminal bend radii and lead-in manufacturing option. SECTION - Toggle Dimensions are shown: Inches (mm) F

162 7000 Series Miniature Toggle Switches TERMINTIONS V VERTICL RIGHT NGLE, PC THRU-HOLE,.50" PITCH PC MOUNTING 730MD9VE Vertical ctuation 3PDT ctuator Shown In Pos. SECTION - Not available with I seal option. Terminal bend radii and lead-in manufacturing option. V VERTICL RIGHT NGLE, PC THRU-HOLE,.50" PITCH PC MOUNTING 740MD9VE Vertical ctuation 4PDT ctuator Shown In Pos. SECTION - Not available with I seal option. Terminal bend radii and lead-in manufacturing option. V, V6, V7, V8 VERTICL MOUNT, V-RCKET V, V7, V8 VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING Dim 70MD9 E SPDT Snap-In OPTION CODE DIM ctuator Shown In Pos. V, V.555 (4,0) Not available with I seal option. V6.460 (,68) V7, V7.630 (6,00) F V8, V8.953 (4,) Toggle Dimensions are shown: Inches (mm) F

163 7000 Series Miniature Toggle Switches TERMINTIONS V, V6, V7, V8 VERTICL MOUNT, V-RCKET PC MOUNTING V, V6, V7, V8 VERTICL MOUNT, V-RCKET, SNP-IN Dim Snap-In OPTION CODE DIM V, V.555 (4,0) 70MD9 E DPDT V6, V6.460 (,68) ctuator Shown In Pos. Not available with I seal option. V7, V7.630 (6,00) V8, V8.953 (4,) V, V7, V8 VERTICL MOUNT, V-RCKET V, V7, V8 VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING Snap-In Dim OPTION CODE DIM V, V.555 (4,0) 730MD9 E 3PDT V7, V7.630 (6,00) ctuator Shown In Pos. V8, V8.953 (4,) Not available with I seal option. V, V7, V8 VERTICL MOUNT, V-RCKET V, V7, V8 VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING Dim Snap-In OPTION CODE DIM V, V.555 (4,0) V7, V7.630 (6,00) 740MD9 E 4PDT F ctuator Shown In Pos. Not available with I seal option. V8, V8.953 (4,) Toggle Dimensions are shown: Inches (mm) F 3

164 7000 Series Miniature Toggle Switches TERMINTIONS V3, V4, V9 VERTICL MOUNT, V-RCKET PC MOUNTING V3, V4 VERTICL MOUNT, V-RCKET, SNP-IN Dim OPTION CODE DIM 70MD9 E SPDT Not available with I seal option. ctuator Shown In Pos. Snap-In V3, V3.460 (,68) V4, V4.630 (6,00) V9.50 (9,) V3, V4, V9 VERTICL MOUNT, V-RCKET V3, V4 VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING Dim 70MD9 E DPDT Snap-In OPTION CODE DIM V3, V3.460 (,68) ctuator Shown In Pos. Not available with I seal option. V4, V4.630 (6,00) V9.50 (9,) V4, V9 VERTICL MOUNT, V-RCKET V4 VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING Dim 730MD9 E 3PDT F Toggle ctuator Shown In Pos. Not available with I seal option. Snap-In OPTION CODE DIM V4, V4.630 (6,00) V9.50 (9,) Dimensions are shown: Inches (mm) F 4

165 7000 Series Miniature Toggle Switches TERMINTIONS V4, V9 VERTICL MOUNT, V-RCKET V4 VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING Dim '' Snap-In 740MD9 E 4PDT ctuator Shown In Pos. Not available with I seal option. OPTION CODE DIM V4, V4.630 (6,00) V9.50 (9,) CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS P GOLD GOLD MTTE-TIN 6 LOW LEVEL/ DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q S SILVER 4,5 SILVER 5 MTTE-TIN 6 POWER 5 0 V C OR 8 V DC; 50 V C. G R GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT OR POWER 0.4 V 0 V C OR DC MX. OR 5 0 V C OR 8 V DC; 50 V C. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. END CONTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. 5 CENTER CONTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte tin alloy nickel plate. NOTE: ny models supplied with P, S, R, Q, or G contact material are RoHS compliant. U-U45 model numbers with all options when ordered with G, S, R, or Q contact material. contact material standard with all terminations except C, Z & Z3. Q contact material standard with C, Z & Z3 terminations. P, S & R contact materials not available with Z & Z3 terminations. F Toggle Dimensions are shown: Inches (mm) F 5

166 .945 (4,0).657 (6,7) 7000 Series Miniature Toggle Switches SEL E EPOXY SEL I EPOXY POTTED SE Dim. '' NO. POLES DIM SP.40 (0,4) DP.440 (,8) 3P.505 (,83) 4P.505 (,83) Compatible with bottom-wash PC board cleaning methods. vailable with C, W-W5, Z & Z3 terminations only. VILLE HRDWRE Cap Cap Cap.383 (9,73).687 (7,45).3 (7,9) PRT NO WHITE LCK RED Material: Polyethylene Finish: Matte L4 Lever handle PRT NO WHITE LCK RED Material: Vinyl Finish: Matte L4 Lever handle PRT NO WHITE LCK RED Material: Vinyl Finish: Matte Fits Z3 Termination female connector.477 (,).777 (9,74) PRT NO WHITE LCK RED Material: Nylon Finish: Matte PRT NO WHITE LCK RED Material: Nylon Finish: Matte PRT NO vailable in loose pieces. NOTE: dditional nuts, locking rings and lockwashers available separately, see Section N. Other colors available, consult Customer Service Center. 759D0000 Sealing oot 703D0000 Sealing oot 704D0000 Sealing oot.04 (5,).658 (6,7) ø.33 (8,4) 6 [0.630] ø [ 0.079].464 (,79) F Toggle /4-40 uns- nut.54 (3,3) NOTE: For use with S actuator style when combined with D, H, H3, Y, and Y4 bushings 5/3-3 NS- NOTE: For use with T and TP style actuators. Cannot be used for Switch Functions: 703, 703, 7303, 7403, 707, 707, 7307, /3-3, NS- NOTE: For use with T, TP and TP style actuators. Cannot be used for Switch Functions: 703, 703, 7303, 7403, 707, 707, 7307, and Dimensions are shown: Inches (mm) F 6

167 Military/erospace/HI-REL MIL-S-8373 Toggle Switches Features/enefits Qualified to MIL-S µ inch selective gold contact plating Epoxy sealed terminals for process compatibility Rated for logic level to 5 amp resistive loads and amp inductive loads Flame retardant housing material RoHS compliant and compatible Test Requirement MIL-S-8373/9, 0, 3, 4, 5, 6. Strength of Terminal lb. solder lug. Strength of ctuating Lever Pivot and Stop 0 lbs. & 8 lbs. throughout range 3. Strength of Mounting Means 5 lbs. in. torque on bushing 4. Dielectric (Sea Level) Indication 000 VC Group, 750 VC after electrical endurance. 500 µ max. leakage 5. Contact Voltage Drop.5 millivolt initial, 5.0 millivolt after mechanical -6 VDC 0. amp 6. Temperature Rise C rise rated resistive load after endurance test Short Circuit 0 operations carry 00 amps resistive lowest DC volts 8. Mechanical Life 0K operations at specified high and low temperatures 9. Electrical Endurance 0K operations at specified high and low temperatures 0. Overload 50 50% of rated resistive load. Electrical Endurance at Sea Level 0K operations resistive room temperature 0K operations inductive room temperature 0K operations lamp room temperature Performed on different test samples. Vibration Method 04 of MIL-STD-0, test condition.06 D.. or 0 G s Hz, 0 usec. max. chatter 3. Shock Fuse-method 3 or MIL-STD-0, 0 usec. max. chatter 4. Salt Spray Test Upon Completion 5. Moisture Resistance Test Upon Completion 48 hours method 0 of MIL-STD-0, test condition 0 operations resistive load (toggle sealed switches only) Method 06 of MIL-STD-0 00 VDC potential between current carrying parts and panel 6. Sand & Dust Method 0 of MIL-STD-0, test condition 6 3 C.5K operations mechanical life (toggle sealed switches only) 7. Explosion MIL-STD-0 method 09, maximum rated DC inductive load (toggle sealed switches only) 8. Sealing Toggle seal 5 operations under 0.5 inches of H O above top of bushing 9..) Toggle Seal.) ushing Seal (Toggle sealed switches only) (Panel sealed switches only) 0. Temperature Operation Mechanical life, 5 C to +7 C. Life Low Cur. Level No requirement. Fungus No requirement 3. Intermediate Current 0K operations, 35/40 5 VDC resistive +7 C 4. Thermal Shock Method 07 of MIL-STD-0 test condition ; 5 55 C/+85 C RTINGS CURRENT RTINGS HIGH LEVEL Current Capacity in mperes Per Pole 8V dc 5V ac, 400 Hz 5V ac, 60 Lamp Load Hz 5 Resistive Load 5 5 Inductive Load CURRENT RTINGS LOGIC LEVEL 0.5 Volt mp (V) 8 V Max. (C or DC) HOW TO ORDER: MTERILS CSE: Diallyl phthalate (DP) (UL 94 V-0). USHING: rass, nickel plated. HOUSING: Stainless steel. CTUTOR: rass, chrome plated. SWITCH SUPPORT: rass, tin plated. TERMINLS: Gold over nickel over copper alloy. TERMINL SEL: Epoxy. CONTCTS: Gold over nickel over silver over brass. PNEL SEL: Silicone rubber. MOUNTING HRDWRE: Two hexagon nut, brass with nickel plating; one lockwasher, steel with nickel plating; one locking ring, brass with nickel plating. Complete part numbers for MIL-S-8373 TOGGLE SWITCHES are shown on pages F 8 through F. F Toggle F 7 Dimensions are shown: Inches (mm)

168 Military/erospace/HI-REL MIL-S-8373 Toggle Switches SWITCH FUNCTION CONNECTED TERMINLS POS. POS. POS. 3 POS. POS. POS. 3 NO. POLES MODEL NO. M8373/9- ON OFF ON M8373/9-3 ON NONE ON SCHEMTIC SP M8373/9-6 ON NONE MOM. 3-3 OPEN - M8373/9-7 MOM. OFF MOM. M8373/9-3 ON OFF MOM. M8373/9-34 NONE ON MOM. N/ -3 - SPDT SPDT SWITCH FUNCTION CONNECTED TERMINLS POS. POS. POS. 3 POS. POS. POS. 3 NO. POLES MODEL NO. M8373/0- ON OFF ON M8373/0-3 ON NONE ON SCHEMTIC M8373/0-6 ON NONE MOM. 3,5-3,5-66 OPEN,5 -,5-44 M8373/0-7 MOM. OFF MOM. DP M8373/0-3 ON OFF MOM. M8373/0-3 ON ON ON M8373/0-33 ON ON MOM ,5-6 -3, ,5-4 M8373/0-34 NONE ON MOM. N/ -3,5-6 -,5-4 M8373/0-35 MOM. ON MOM. -3,5-6 -3,5-4 -,5-4 DPDT DPDT F PNEL MOUNTING Toggle Without locking ring. With standard locking ring. F 8 Dimensions are shown: Inches (mm)

169 Military/erospace/HI-REL MIL-S-8373 Toggle Switches SWITCH FUNCTION CONNECTED TERMINLS POS. POS. POS. 3 POS. POS. POS. 3 NO. POLES SP MODEL NO. M8373/9- ON OFF ON M8373/9-3 ON NONE ON M8373/9-6 ON NONE MOM. 3-3 OPEN - M8373/9-7 MOM. OFF MOM. M8373/9-3 ON OFF MOM. SPDT M8373/9-34 NONE ON MOM. N/ -3 - SCHEMTIC PC MOUNTING SPDT SWITCH FUNCTION CONNECTED TERMINLS POS. POS. POS. 3 POS. POS. POS. 3 NO. POLES MODEL NO. M8373/0- ON OFF ON M8373/0-3 ON NONE ON M8373/0-6 ON NONE MOM. -3,5-6 3,5 6 OPEN -,5-4 M8373/0-7 MOM. OFF MOM. SCHEMTIC DP M8373/0-3 ON OFF MOM. M8373/0-3 ON ON ON M8373/0-33 ON ON MOM ,5-6 -3, ,5-4 DPDT M8373/0-34 NONE ON MOM. N/ -3,5-6 -,5-4 M8373/0-35 MOM. ON MOM. -3,5-6 -3,5-4 -,5-4 PC MOUNTING F DPDT Toggle Dimensions are shown: Inches (mm) F 9

170 Military/erospace/HI-REL MIL-S-8373 Toggle Switches SWITCH FUNCTION CONNECTED TERMINLS POS. POS. POS. 3 POS. POS. POS. 3 NO. POLES MODEL NO. M8373/3- ON OFF ON M8373/3-3 ON NONE ON SCHEMTIC SP M8373/3-6 ON NONE MOM. 3-3 OPEN - M8373/3-7 MOM. OFF MOM. M8373/3-3 ON OFF MOM. M8373/3-34 NONE ON MOM. N/ -3 - SPDT PC MOUNTING SPDT SWITCH FUNCTION CONNECTED TERMINLS POS. POS. POS. 3 POS. POS. POS. 3 NO. POLES MODEL NO. M8373/4- ON OFF ON M8373/4-3 ON NONE ON M8373/4-6 ON NONE MOM. 3,5-3,5-66 OPEN,5 -,5-44 M8373/4-7 MOM. OFF MOM. SCHEMTIC DP M8373/4-3 ON OFF MOM. M8373/4-3 ON ON ON M8373/4-33 ON ON MOM , , ,5-4 DPDT M8373/4-34 NONE ON MOM. N/ -3,5-6 -,5-4 M8373/4-35 MOM. ON MOM. -3,5-6 -3,5-4 -,5-4 PC MOUNTING F Toggle DPDT Dimensions are shown: Inches (mm) F 0

171 Military/erospace/HI-REL MIL-S-8373 Toggle Switches SWITCH FUNCTION CONNECTED TERMINLS POS. POS. POS. 3 POS. POS. POS. 3 NO. POLES MODEL NO. M8373/5- ON OFF ON M8373/5-3 ON NONE ON SCHEMTIC SP M8373/5-6 ON NONE MOM. 3-3 OPEN - M8373/5-7 MOM. OFF MOM. M8373/5-3 ON OFF MOM. M8373/5-34 NONE ON MOM. N/ -3 - SPDT PC MOUNTING SPDT SWITCH FUNCTION CONNECTED TERMINLS POS. POS. POS. 3 POS. POS. POS. 3 NO. POLES MODEL NO. M8373/6- ON OFF ON M8373/6-3 ON NONE ON SCHEMTIC M8373/6-6 ON NONE MOM. -3,5-6 3,5 6 OPEN -,5-4 M8373/6-7 MOM. OFF MOM. DP M8373/6-3 ON OFF MOM. M8373/6-3 ON ON ON M8373/6-33 ON ON MOM. -3, ,5-4 -,5-4 M8373/6-34 NONE ON MOM. N/ -3,5-6 -,5-4 DPDT M8373/6-35 MOM. ON MOM. -3,5-6 -3,5-4 -,5-4 PC MOUNTING F DPDT Toggle Dimensions are shown: Inches (mm) F

172 E Series Sealed Miniature Toggle Switches Features/enefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical pplications Telecommunications Instrumentation Medical equipment Specifications CONTCT RTING: contact material: 0.4 V 0 V C or DC max. Q contact material: EXX & EXX MODELS: V C or 8 V DC; 3 50 V C. E3XX MODELS: 5 5 V C or 8 V DC; 50 V C. See page F-9 for additional ratings. ELECTRICL LIFE: EXX and EXX models: 40,000 make-and-break cycles at full load. E3XX models: 30,000 cycles. CONTCT RESISTNCE: elow 0 mω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. ELECTROSTTIC DISCHRGE (ESD) OPTION: F conductive bushing only. Dissipates up to 0,000 V DC from actuator to ground. DIELECTRIC STRENGTH: 000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 85ºC. SOLDERILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. Materials CSE & USHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0). F conductive bushing option is impregnated with carbon fibers. CTUTOR: rass, chrome plated with internal o-ring seal standard. SWITCH SUPPORT: rass or steel, matte-tin plated. SWITCH SUPPORT RETINER: Stainless steel. CONTCTS & TERMINLS: contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-9 for additional contact materials. TERMINL SEL: Epoxy. HRDWRE: Nut & Locking ring: rass, nickel plated. Lockwasher: Steel, nickel plated. NOTE: ny models supplied with P, S, R, Q, or G contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. uild--switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages F 3 thru F 9. For additional options not shown in catalog, consult our Customer Service Center. ll models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. F Toggle Switch Function E0 SP, On-None-On E03 SP, On-Off-On E05 SP, Mom.-Off-Mom. E07 SP, On-Off-Mom. E08 SP, On-None-Mom. E0 DP, On-None-On E03 DP, On-Off-On E05 DP, Mom.-Off-Mom. E07 DP, On-Off-Mom. E08 DP, On-None-Mom. E DP, On-On-On E3 DP, On-On-Mom. E5 DP, Mom.-On-Mom. **E30 3P, On-None-On * F available with SP and DP versions only, please see page F-9 ** Y threaded bushing available for & pole only ctuator M.300" high S.500" high L3 Plastic,.940" high ushing D.50" high *F Conductive,.50" high D9.80" high **Y Threaded,.350" high Terminations Right angle, PC thru-hole V Vertical right angle, PC thru-hole C PC Thru-hole V3.460" high, V-bracket Z Solder lug 3 Right angle, PC thru-hole V3 Vertical right angle, PC thru-hole V6.460" high, V-bracket V9.50" high, V-bracket V3.460" high, snap-in V-bracket V6.460" high, snap-in V-bracket W.750" long, wire wrap Z3 Quick connect Contact Material Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Dimensions are shown: Inches (mm) F

173 E Series Sealed Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. POS. POS. 3 CONNECTED TERMINLS POS. POS. POS. 3 NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMTIC E0 ON NONE ON -3 N/ - E03 ON OFF ON SP E05 MOM. OFF MOM. -3 OPEN - E07 ON OFF MOM. E08 ON NONE MOM. -3 N/ - SPDT SPDT Part number shown: E0SDCE Terminal Numbers For Reference Only E0 ON NONE ON -3,5-6 N/ -,5-4 E03 ON OFF ON E05 MOM. OFF MOM. -3,5-6 OPEN -,5-4 DP E07 E08 ON OFF MOM. ON NONE MOM. -3,5-6 N/ -,5-4 E ** ON ON ON E3** ON ON MOM. -3,5-6 -3,5-4 -,5-4 E5** MOM. ON MOM. DPDT DPDT Part number shown: E0SDCE Terminal Numbers For Reference Only MOM. = Momentary ** Wiring for 3-way switch, see Section N. ll models with all options when ordered with G,R, Q or S contact material except with F conductive bushing. F Toggle Dimensions are shown: Inches (mm) F 3

174 E Series Sealed Miniature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. POS. POS. 3 CONNECTED TERMINLS POS. POS. POS. 3 NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMTIC 3P E30 ON NONE ON -3,5-6,8-9 N/ -,5-4,8-7 3PDT 3PDT Part number shown: E30SDCE Terminal Nos. For Reference Only MOM. = Momentary ** Wiring for 3-way switch, see Section N. ll models with all options when ordered with G, R, Q or S contact material except with F conductive bushing. CTUTOR CTUTOR CTUTOR COLOR M.300" HIGH S.500" HIGH L3 PLSTIC,.940" HIGH * * Gloss plastic * OPTION CODE L3 CTUTOR COLOR LCK Standard when ordered with, 3, V, V3, V-V6 terminations. Finish: Chrome. Standard when ordered with C, Z, Z3, W & W4 terminations. Finish: Chrome Chrome finish Other colors available, consult Customer Service Center. No color choice required for S & M actuators. * ctuators shown with standard D bushing. Subtract.030 (0,76) for D9 bushing. Subtract.00 (,54) for Y bushing. USHING D F.50" HIGH, UNTHREDED ESD CONDUCTIVE USHING,.50" HIGH, UNTHREDED D9.80" HIGH, UNTHREDED Y THREDED, INSULTED,.350" HIGH WITH KEYWY F bushing is not UL approved /4-40 UNS- PNEL MOUNTING F Toggle ESD protection depends on proper grounding of switch support bracket. F conductive bushing option is impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 0,000 V from actuator to ground. vailable with M & S actuator options and, 3, V, V3, V3-V6 termination options. E3XX models not available with D9 bushing. NOTE: Internal o-ring actuator seal standard for all bushing options. vailable only with C, Z, Z3, & W terminations. vailable for & pole only. Hardware: One dress nut part number 99D00, one hex nut part number and lockwasher part number supplied standard. Will withstand 4 in.-lbs. of torque with no distortion. Dimensions are shown: Inches (mm) F 4

175 E Series Sealed Miniature Toggle Switches TERMINTIONS Z SOLDER LUG C PC THRU-HOLE PC MOUNTING SPDT thru 3PDT Not available with F conductive bushing or P, R or S contact material. SPDT thru 3PDT Not available with F conductive bushing. Z3 QUICK CONNECT SPDT thru 3PDT Not available with F conductive bushing or P, R or S contact material. Mating quick connector available; order part number , page F-6. RIGHT NGLE, PC THRU-HOLE 3 ctuator Shown In Pos. RIGHT NGLE, SNP-IN, PC THRU-HOLE SECTION - Terminal Nos. For Reference Only PC MOUNTING E0MDE Horizontal ctuation SPDT Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. RIGHT NGLE, PC THRU-HOLE ctuator Shown In Pos. 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE SECTION - Terminal Nos. For Reference Only PC MOUNTING E0MDE Horizontal ctuation DPDT F Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. Toggle Dimensions are shown: Inches (mm) F 5

176 E Series Sealed Miniature Toggle Switches TERMINTIONS RIGHT NGLE, PC THRU-HOLE PC MOUNTING E30MDE Horizontal ctuation 3PDT ctuator Shown In Pos. Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. V VERTICL RIGHT NGLE, PC THRU-HOLE,.50" PITCH SECTION - Terminal Nos. For Reference Only V3 E0MDVE Vertical ctuation SPDT ctuator Shown In Pos. VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50" PITCH SECTION - PC MOUNTING Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. V VERTICL RIGHT NGLE, PC THRU-HOLE,.50" PITCH 3 E0MDVE Vertical ctuation DPDT ctuator Shown In Pos. VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.50" PITCH SECTION - PC MOUNTING F Toggle Not available with Y bushing. Terminal bend radii and lead-in manufacturing option. F 6 Dimensions are shown: Inches (mm)

177 E Series Sealed Miniature Toggle Switches TERMINTIONS V VERTICL RIGHT NGLE, PC THRU-HOLE,.50" PITCH E30MDVE V3 ctuator Shown In Pos. VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE.50" PITCH SECTION - Vertical ctuation 3PDT PC MOUNTING Not available with D9 & Y bushings. Terminal bend radii and lead-in manufacturing option. V6 V6 VERTICL MOUNT, V-RCKET VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING E0MD E SPDT SNP-IN OPTION CODE DIM V6, V6.460 (,68) ctuator Shown In Pos. Not available with Y bushing. V6 V6 VERTICL MOUNT, V-RCKET VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING SNP-IN OPTION CODE E0MD E DPDT DIM F ctuator Shown In Pos. Not available with Y bushing. V6, V6.460 (,68) Toggle Dimensions are shown: Inches (mm) F 7

178 E Series Sealed Miniature Toggle Switches TERMINTIONS V3, V9 VERTICL MOUNT, V-RCKET V3 VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING E0MD E SPDT SNP-IN OPTION CODE DIM V3, V3.460 (,68) V9.50 (9,) Not available with Y bushing. ctuator Shown In Pos. V3, V9 VERTICL MOUNT, V-RCKET V3 VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING E0MD E DPDT SNP-IN OPTION CODE DIM V3, V3.460 (,68) V9.50 (9,) Not available with Y bushing. ctuator Shown In Pos. V9 VERTICL MOUNT, V-RCKET PC MOUNTING F E30MD E 3PDT SNP-IN OPTION CODE DIM V9.50 (9,) Toggle Not available with D9 & Y bushings. ctuator Shown In Pos. Dimensions are shown: Inches (mm) F 8

179 CONTCT MTERIL E Series Sealed Miniature Toggle Switches OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS P GOLD GOLD MTTE-TIN 6 LOW LEVEL/ DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q S SILVER 4,5 SILVER 5 MTTE-TIN 6 POWER EXX & EXX MODELS: V C OR 8 V DC; 3 50 V C. E3XX MODELS: 5 5 V C OR 8 V DC; 50 V C. G R GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT OR POWER EXX ND EXX MODELS: 0.4 V V C OR DC MX. OR 7.5 V C OR 8 V DC; 3 50 V C. DC E3XX MODELS: 0.4 V 0 V C OR DC MX. OR 5 5 V C OR 8 V DC; 50 V C. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. END CONTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. NOTE: ny models supplied with P, S, R, Q, or G contact material are RoHS compliant. ll models with all options when ordered with S, R, G, or Q contact material except with F conductive bushing. contact material standard with all terminations. P, S & R contact materials not available with Z & Z3 terminations. 5 CENTER CONTCT & LL TERMINLS: Copper alloy, with gold flash over silver plate. Or copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte-tin over nickel plate. F Toggle F 9 Dimensions are shown: Inches (mm)

180 ET Series Sealed Subminiature Toggle Switches Features/enefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PC space RoHS compliant models available Typical pplications Hand-held telecommunications Instrumentation Medical equipment Specifications CONTCT RTING: contact material: 0.4 V 0 V C or DC max. See page F-35 for additional ratings. ELECTRICL LIFE: ETX models: 60,000 make-and-break cycles at full load. ll other models: 30,000 cycles. CONTCT RESISTNCE: elow 0 m Ω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. ELECTROSTTIC DISCHRGE (ESD) RESISTNT OPTION: M3 & S3 insulating actuator only: 9,000 V DC sea level, actuator to terminals. F conductive bushing only: Dissipates up to 0,000 V DC from actuator to ground. M3 & S3 actuator and F bushing options are not recommended for use together. DIELECTRIC STRENGTH: 000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 85ºC. SOLDERILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). DEGREE OF PROTECTION: IP57; Protection against harmful dust deposit, full-scale voltage protection, temporary immersion. PCKGING: Surface mount switches are shipped in tape and reel packaging, see page F-36 for drawings and reel information. Materials CSE & USHING: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) or glass filled 4/6 nylon, flame retardant, heat stabilized (UL 94V-0). F conductive bushing option is impregnated with carbon fibers. CTUTOR: M3 & S3 anti-static actuator: Nylon 4/6, black standard (UL 94V-0). ll other actuators: rass, chrome plated. Internal o-ring seal standard with all actuators. SWITCH SUPPORT: rass, tin plated. CONTCTS & TERMINLS: contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See F-35 for additional contact materials. TERMINL SEL: Epoxy. NOTE: ny models supplied with Q,, G, P or R contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. uild--switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages F 3 thru F 36. For additional options not shown in catalog, consult our Customer Service Center. ll models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods. F Toggle Switch Function ET0 SP, On-None-On ET0 SPST, Off-None-On ET03 SP, On-Off-On ET05 SP, Mom.-Off-Mom. ET07 SP, On-Off-Mom. ET08 SP, On-None-Mom. ET DP, On-None-On ET3 DP, On-Off-On ET4 DP, On-On-On ET5 DP, Mom.-Off-Mom. ET7 DP, On-Off-Mom. ET8 DP, On-None-Mom. ctuator M.40" high M3 Plastic, anti-static,.40" high S.400" high L.30" high S.540" high ushing D.77" High, Unthreaded F.77" high, unthreaded, ESD conductive Terminations Right angle, PC thru-hole V Vertical right angle, PC thru-hole C PC Thru-hole S Right angle, surface mount S Right angle, surface mount rear-facing V3 Vertical mount, V-bracket V3 Vertical right angle, snap-in, PC thru-hole V3 Vertical mount, V-bracket, snap-in W Wire wrap Contact Material Gold P Gold, matte tin Q Silver S Silver/matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy Plastic ctuator Color NONE No actuator color lack White F 30 Dimensions are shown: Inches (mm)

181 SWITCH FUNCTION ET Series Sealed Subminiature Toggle Switches SWITCH FUNCTION POS. POS. POS. 3 CONNECTED TERMINLS POS. POS. POS. 3 NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMTIC ET0 ON NONE ON -3 N/ - ET03 ON OFF ON SP ET05 ET07 MOM. OFF MOM. ON OFF MOM. -3 OPEN - ET08 ON NONE MOM. -3 N/ - SPDT ET0 OFF NONE ON OPEN N/ 3- SPST SPDT Part number shown: ET0MDCE ET0 Models: Omit terminal Terminal Nos. For Reference Only ET ON NONE ON -3,5-6 N/ -,5-4 ET3 ON OFF ON DP ET5 ET7 MOM. OFF MOM. ON OFF MOM. -3,5-6 OPEN -,5-4 ET8 ON NONE MOM. -3,5-6 N/ -,5-4 ET4** ON ON ON -3,5-6 -3,5-4 -,5-4 DPDT DPDT Part number shown: ETMDCE Terminal Nos. For Reference Only MOM. = Momentary ** Wiring for 3-way switch, see Section N. ll models with all options (except M3 actuator) when ordered with G, L, R or Q contact material except with F conductive bushing. F Toggle F 3 Dimensions are shown: Inches (mm)

182 ET Series Sealed Subminiature Toggle Switches CTUTOR CTUTOR COLOR M.40" HIGH M3 PLSTIC, NTISTTIC,.40" HIGH S.400" HIGH L.30" HIGH Standard with, V, V3 & V3 terminations. S.540" HIGH Material: Nylon 4/6 (UL 94V-0), black standard. Static resistance: 9,000 V DC sea level, actuator to terminals. Not available with F conductive bushing option. Not UL approved. Standard with C or W terminations. OPTION CODE PLSTIC CTUTOR COLOR (NONE) LCK (M3 & S3 only) WHITE (M3 & S3 only) NOTE: ll actuators have chrome finish (except M3 & S3 ). USHING D F.77" HIGH, UNTHREDED ESD, CONDUCTIVE USHING UNTHREDED,.77" HIGH F bushing is not UL approved NOTE: ESD protection depends on proper grounding of switch support bracket. F conductive bushing option is impregnated with carbon fibers; dissipates electrostatic discharge (ESD) up to 0,000 V from actuator to ground. vailable with all metal actuator options and, V, V3, V3 and V3 termination options only. Internal actuator o-ring seal standard. TERMINTIONS C PC THRU-HOLE W WIRE WRP SP DP SP DP SP PC MOUNTING DP ET0 omit center hole. F Toggle SP and DP Not available with F conductive bushing. SP and DP Not available with F conductive bushing. Dimensions are shown: Inches (mm) F 3

183 TERMINTIONS ET Series Sealed Subminiature Toggle Switches RIGHT NGLE, PC THRU-HOLE PC MOUNTING ET0MDE Horizontal ctuation SPDT ctuator Shown In Pos. Not available with ET0 model. RIGHT NGLE, PC THRU-HOLE PC MOUNTING ETMDE Horizontal ctuation DPDT ctuator Shown In Pos. V VERTICL RIGHT NGLE, PC THRU-HOLE PC MOUNTING ET0MDVE Vertical ctuation SPDT ctuator Shown In Pos. ET0 - omit terminal. NOTE: Terminal bend radii and lead-in manufacturing option. V VERTICL RIGHT NGLE, PC THRU-HOLE PC MOUNTING F ETMDVE Vertical ctuation DPDT ctuator Shown In Pos. NOTE: Terminal bend radii and lead-in manufacturing option. Toggle Dimensions are shown: Inches (mm) F 33

184 ET Series Sealed Subminiature Toggle Switches TERMINTIONS V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE PC MOUNTING ctuator Shown In Pos. ET0SDVE Vertical ctuation SPDT S RIGHT NGLE, SURFCE MOUNT PC MOUNTING ctuator Shown In Pos. ET0M3DSPE Horizontal ctuation SPDT Only Not available with S and S actuators. Standard with tape & reel packaging, See page F-36. S RIGHT NGLE, SURFCE MOUNT.76 (7,0).04 (,04).354 (9,00) ø.8 (4,60) EPOXY SEL.00 TYP (0,5) Not available in ET0. ctuators M and M3, bushing D, contact material. Standard with tape and reel packaging-see page F (,50).403 (0,4).05 (,30). (3,07).7 (5,5).34 (5,94) ø.099 (,5Ø).7 (4,35).7 (6,90).403 (0,4).03 TYP. (0,80).00 (5,08).059 (,50).07 TYP. (,80).079 TYP. (,0).00 (,54) ET0M3DSE Horizontal ctuation SPDT Only V3 V3 VERTICL MOUNT, V-RCKET VERTICL MOUNT, V-RCKET, SNP-IN PC MOUNTING F Toggle ctuator Shown In Pos. ET0 Models: Omit terminal V3 Snap-In ET0 Models: Omit center hole ET0MDV3E SPDT F 34 Dimensions are shown: Inches (mm)

185 TERMINTIONS ET Series Sealed Subminiature Toggle Switches V3 VERTICL MOUNT, V-RCKET PC MOUNTING ETMDV3E DPDT ctuator Shown In Pos. CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS P GOLD GOLD MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q S G R SILVER SILVER 4,5 5 MTTE-TIN 6 GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 6 POWER LOW LEVEL/DRY CIRCUIT OR POWER ETX MODELS: 3 0 V C OR 8 V DC LL OTHER MODELS: 0 V C OR 8 V DC ETX MODELS: 0.4 V 0 V C OR DC MX. OR 3 0 V C OR 8 V DC LL OTHER MODELS: 0.4 V 0 V C OR DC MX. OR 0 V C OR 8 V DC * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. END CONTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. 5 CENTER CONTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte tin over nickel plate. NOTE: ny models supplied with Q,, G, P or R contact material are RoHS compliant. ll models with all options (except M3 actuator) when ordered with G, L, R or Q contact material except with F conductive bushing. SEL E EPOXY SEL VILLE HRDWRE Cap PRT NO WHITE LCK RED Material: Vinyl Finish: Matte.338 (8,59) NOTE: Other colors available, consult Customer Service Center. F Toggle Dimensions are shown: Inches (mm) F 35

186 ET Series Sealed Subminiature Toggle Switches TPE & REEL For part number ET0M3DSKE REEL INFORMTION OUTSIDE DIMETER 3.00 (330,0) PILOT HOLE.5 (3,0) QUNTITY PER REEL 600 For part number ET0M3DSE (6,00) 0.57 (4,0) (,0) ø (,50) (,75) 0.97 (7,55) 0.04 (0,35) REEL INFORMTION (0,) OUTSIDE DIMETER 3.00 (330,0) PILOT HOLE.795 (0,0) QUNTITY PER REEL (44,0) (5,30) FEED DIRECTION F Toggle F 36 Dimensions are shown: Inches (mm)

187 T Series Subminiature Toggle Switches Features/enefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical pplications Hand-held telecommunications Instrumentation Medical equipment Specifications CONTCT RTING: contact material: 0.4 V 0 V C or DC max. Q contact material (TX0 models): 3 0 V C or 8 V DC. ll other models: 0 V C or 8 V DC. See page F-4 for additional ratings. ELECTRICL LIFE: TX0 models: 60,000 make-and-break cycles at full load. ll other models: 30,000 cycles. CONTCT RESISTNCE: elow 0 m Ω typ. -4 V DC, 00 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH: 000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 85ºC. SOLDERILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). NOTE: ny models supplied with P, R, Q, or G contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CSE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DP), (UL 94V-0) or glass filled nylon 4/6, flame retardant, heat stabilized. CTUTOR: rass, chrome plated. USHING: rass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: rass, matte-tin plated. END CONTCTS: contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See above for additional contact materials. CENTER CONTCTS & TERMINLS: contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-4 for additional contact materials. TERMINL SEL: Epoxy. HRDWRE: Nut & Locking Ring: rass, nickel plated. Lockwasher: Steel, nickel plated. dditional hardware available separately, see Section N. uild--switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages F-38 thru F-4. For additional options not shown in catalog, consult Customer Service Center. ll models have epoxy terminal seal and are compatible with all bottom-wash PC cleaning methods. Switch Function T0 SPDT On-None-On T0 SPDT Off-None-On T03 SPDT On-Off-On T05 SPDT Mom.-Off-Mom. T07 SPDT On-Off-Mom. T08 SPDT On-None-Mom. T0 DPDT On-None-On T03 DPDT On-Off-On T05 DPDT Mom.-Off-Mom. T07 DPDT On-Off-Mom. T08 DPDT On-None-Mom. T DPDT On-On-On. ctuator P3 Flatted, anti-rotation,.490" high S.370" high K Locking lever, round tip L.640" high M.0" high S.40" high M.0" high L.90" high ushing H.0" high, threaded, flat H9.0" high, unthreaded, flat CF Splashproof,.30" high, threaded, flat D9.60" high, unthreaded, keyway T.30" high, threaded, flat T9.30" high, unthreaded, flat TD.60" high, threaded, keyway TK.30" high, threaded, keyway Y.0" high, threaded, keyway Y9.0" high, unthreaded, keyway Terminations Right angle, PC thru-hole V Vertical right angle, PC thru-hole C PC Thru-hole V3 Vertical mount V-bracket Z Solder lug W Wire wrap Contact Material Gold P Gold, matte tin Q Silver G Gold over silver R Gold over silver, matte-tin Seal E Epoxy F Toggle F 37 Dimensions are shown: Inches (mm)

188 T Series Subminiature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. POS. POS. 3 CONNECTED TERMINLS POS. POS. POS. 3 NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMTIC T0 ON NONE ON -3 N/ - T03 ON OFF ON SP T05 T07 MOM. OFF MOM. ON OFF MOM. -3 OPEN - T08 ON NONE MOM. -3 N - SPDT T0 OFF NONE ON OPEN N/ 3- SPST SPDT Part number shown: T0SHZQE.338 (8,57) SWITCH FUNCTION POS. POS. POS. 3 CONNECTED TERMINLS POS. POS. POS. 3 NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMTIC T0 ON NONE ON -3,5-6 N/ -,5-4 T03 ON OFF ON DP T05 MOM. OFF MOM. -3,5-6 OPEN -,5-4 T08 ON NONE MOM. -3,5-6 N/ -,5-4 T* ON ON ON. -3,5-6 -3,5-4 -,5-4 DPDT DPDT F Toggle Part number shown: T0SHZQE MOM. = Momentary * Wiring for 3-way switch refer to page N-0 ll models.338 (8,57) with all options when ordered with G, L, R or Q contact material. Terminal Nos. For Reference Only Dimensions are shown: Inches (mm) F 38

189 CTUTOR T Series Subminiature Toggle Switches M.0" HIGH S.370" HIGH M.0" HIGH (with T bushing) S.40" HIGH (with T bushing).4 (5,44) Standard with, V or V3 terminations. Standard with Z, C or W terminations. L.90" HIGH L.640" HIGH P3 NTI-ROTTION, FLTTED,.450" HIGH ctuator shown with standard H bushing. Subtract.040 (,0) for TD and D9 bushings, subtract.090 (,9) for T, T9, TK, K9 & CF bushings. ctuators shown with T, T9, TK & CF bushings, add.050 (,7) for TD and D9 bushings, add.090 (,9) for H, H9, Y & Y9 bushings. ll actuators have chrome finish (except K). vailable with T & T9 bushings only. Dress nut part number supplied standard with threaded bushing. K LOCKING LEVER Locking Positions 0 & 0 Models Position lock 03 & Models 3 Position lock 08 Models Position lock K actuators have natural aluminum finish. Not available with CF bushing option. ushing option code not required. Not available with TX05 & TX07 models. Keyway on right side. To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. Overtightening mounting nut may cause actuator to bind. USHING H.0" HIGH THREDED, FLT Y.0" HIGH THREDED, KEYWY T.30" HIGH THREDED, FLT H9.0" HIGH UNTHREDED, FLT Y9.0" HIGH UNTHREDED, KEYWY T9.30" HIGH UNTHREDED, FLT F H standard with C, W & Z terminations. H9 standard with, V & V3 terminations. Toggle F 39 Dimensions are shown: Inches (mm)

190 T Series Subminiature Toggle Switches USHING TK.30" HIGH THREDED, KEYWY TD.60" HIGH THREDED, KEYWY CF SPLSHPROOF,.30" HIGH THREDED, FLT D9.60" HIGH UNTHREDED, KEYWY 0-48 USHING PNEL MOUNTING IP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer standard. Not available with K locking lever option. /4 IN. USHING With Standard Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring With Small Locking Ring With Standard Locking Ring TERMINTIONS Z SOLDER LUG C PC THRU-HOLE SP DP SP DP PC MOUNTING Not available with P or R contact materials. T0 omit center hole. W WIRE WRP SP DP F Toggle F 40 Dimensions are shown: Inches (mm)

191 T Series Subminiature Toggle Switches TERMINTIONS RIGHT NGLE, PC THRU-HOLE.4 (5,44).0 (0,56) PC MOUNTING.8 (3,5) ctuator Shown In Pos. Not available with T0 model. T0MH9E Horizontal ctuation SPDT RIGHT NGLE, PC THRU-HOLE.4 (5,44) PC MOUNTING.0 (0,56).8 (3,5) ctuator Shown In Pos. T0MH9E Horizontal ctuation DPDT V VERTICL RIGHT NGLE, PC THRU-HOLE.4 (5,44) PC MOUNTING.06 (0,66) ctuator Shown In Pos..53 (3,89) T0 Models: Omit terminal NOTE: Terminal bend radii and lead-in manufacturing option. T0MH9VE Vertical ctuation SPDT V VERTICL RIGHT NGLE, PC THRU-HOLE.4 (5,44).0 (0,56) PC MOUNTING ctuator Shown In Pos..53 (3,89) NOTE: Terminal bend radii and lead-in manufacturing option. V3 VERTICL MOUNT, V-RCKET PC MOUNTING T0MH9VE Vertical ctuation DPDT ctuator Shown In Pos..4 (5,44) T0 Models: Omit terminal.358 (9,08) T0 Models: Omit center hole. T0MH9V3E SPDT F Toggle F 4 Dimensions are shown: Inches (mm)

192 T Series Subminiature Toggle Switches TERMINTIONS V3 VERTICL MOUNT, V-RCKET.4 (5,44) PC MOUNTING T0MH9V3E DPDT ctuator Shown In Pos. CONTCT MTERIL OPTION CODE CONTCT MTERIL TERMINL PLTING RTINGS P GOLD GOLD MTTE-TIN 6 LOW LEVEL/ DRY CIRCUIT 0.4 V 0 V C OR DC MX. Q SILVER 4,5 SILVER 5 POWER TX0 MODELS: 3 0 V C OR 8 V DC. LL OTHER MODELS: 0 V C OR 8 V DC. G R GOLD OVER SILVER,3 GOLD 3 MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT OR POWER TX0 MODELS: 0.4 V 0 V C OR DC MX. OR 3 0 V C OR 8 V DC. LL OTHER MODELS: 0.4 V 0 V C OR DC MX. OR 0 V C OR 8 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. END CONTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. 5 CENTER CONTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte-tin over nickel plate. ll models with all options when ordered with R, G, or Q contact material. contact material standard with, V, V3 & W terminations. Q contact material standard with C & Z terminations. SEL E EPOXY SEL VILLE HRDWRE 759D0000 SELING OOT.04 (5,) F.658 (6,7) Toggle * Note: For use with S actuator style when combined with T, TK, and CF bushings. /4-40 uns- nut.54 (3,3) Dimensions are shown: Inches (mm) F 4

193 GT Series Sealed Ultraminiature Toggle Switches Features/enefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature materials (UL 94V-0) RoHS compliant and compatible Typical pplications Hand-held telecommunications Small instrumentation Specifications CONTCT RTING: 0.4 V 0 V C or DC max. MECHNICL & ELECTRICL LIFE: 40,000 make-and-break cycles at full load. CONTCT RESISTNCE: elow 50 m Ω typ. -4 V DC, 00 m. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH: 500 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 85ºC. SOLDERILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). PCKGING: Surface mount switches shipped in anti-static tape and reel packaging per EI 48-3, see page F-47 for drawings and reel information. Tape and cover strip are conductive for use near statically sensitive components, consult Customer Service Center. Materials HOUSING ND SE: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0). CTUTOR: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0), with standard internal o-ring seal. SWITCH SUPPORT: rass, tin plated. MOVLE CONTCTS: Copper alloy, with gold plate over nickel plate. STTIONRY CONTCTS: Copper alloy, with gold plate over nickel plate. TERMINLS: Gold. TERMINL SEL: Epoxy. ll terminals insert molded. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Complete part numbers for GT Series Sealed Ultraminiature Toggle Switches are shown on pages F 43 thru F 47. GTMCE SPDT PRT NUMER GTMCE GT3MCE Conn. Terms. Schematic SWITCH FUNCTION POS. POS. POS. 3 ON NONE ON ON OFF ON -3 OPEN -.60 (4,06).70 DI..066 DI..50 (3,8).063 (,60).00 (,54) C&K MRKING ON.05 TYP. OPPOSITE SIDE (0,38).00 (,54) 6.00 TYP. (0,5) 4.77 (4,50) 3 EPOXY SEL.76 (7,0) SPDT GTMCE Note: Pins 4 and 6 not connected OFF NONE ON.8 (5,79).30 TYP. (3,30) Conn. Terms. OPEN N/ 3- CTUTOR SHOWN IN POS. Schematic SPST Note: Pins 4 and 6 not connected PC MOUNTING TERMINL NOS. FOR REFERENCE ONLY 6 3 GT-omit hole. 4 GT MODEL TERMINLS,3,4 & 6 ONLY F Toggle F 43 Dimensions are shown: Inches (mm)

194 GT Series Sealed Ultraminiature Toggle Switches.00 (,54).60 (4,06).70 DI..066 DI..50 (3,8).063 (,60).8 (5,79) C&K MRKING ON OPPOSITE SIDE.00 (,54).00 TYP. (0,5).30 TYP. (3,30).05 TYP. (0,38).77 (4,50) EPOXY SEL.76 (7,0) PRT NUMER GTMCE GT3MCE Conn. Terms. Schematic SWITCH FUNCTION POS. POS. POS. 3 ON NONE ON ON OFF ON -3, 5-6 OPEN -, 5-4 GTMCE DPDT CTUTOR SHOWN IN POS. PC MOUNTING TERMINL NOS. FOR REFERENCE ONLY 6 3 DPDT GTMCE Conn. Terms. OFF NONE ON OPEN N/ 3-4 Schematic GT MODEL TERMINLS,3,4 & 6 ONLY DPST GT-omit holes & 5. SWITCH FUNCTION POS. POS. POS. 3 PRT NUMER ctuator Shown In Pos. GTME GT3ME Conn. Terms. Schematic ON NONE ON ON OFF ON -3 OPEN - GTME Horizontal ctuation SPDT PC MOUNTING SPDT GTME OFF NONE ON GT Models Conn. Terms. Schematic OPEN N/ 3- SPST GT-omit hole. SWITCH FUNCTION POS. POS. POS. 3 PRT NUMER GTME GT3ME ON NONE ON ON OFF ON ctuator Shown In Pos. PC MOUNTING Conn. Terms. Schematic DPDT GTME Conn. Terms. -3, 5-6 OPEN -, 5-4 OFF NONE ON OPEN N/ 3-, 6-4 GTME Horizontal ctuation DPDT F Schematic Toggle GT-omit holes & 5. GT Models DPST F 44 Dimensions are shown: Inches (mm)

195 GT Series Sealed Ultraminiature Toggle Switches SWITCH FUNCTION POS. POS. POS. 3 PRT NUMER GTMVE GT3MVE ON NONE ON ON OFF ON Conn. Terms. -3 OPEN - GTMVE Vertical ctuation SPDT Schematic SPDT GTMVE Conn. Terms. OFF NONE ON OPEN N/ 3- ctuator Shown In Pos. PC MOUNTING Schematic GT omit hole. SPST GT Models SWITCH FUNCTION POS. POS. POS. 3 PRT NUMER GTMVE GT3MVE ON NONE ON ON OFF ON Conn. Terms. -3, 5-6 OPEN -, 5-4 GTMVE Schematic Vertical ctuation DPDT DPDT GTMVE Conn. Terms. OFF NONE ON OPEN N/ 3-, 6-4 ctuator Shown In Pos. PC MOUNTING Schematic DPST GT omit holes & 5. GT Models:, 3, 4 & 6 terminals only. SWITCH FUNCTION POS. POS. POS. 3 GTMV3E SPDT PRT NUMER GTMV3E GT3MV3E Conn. Terms. Schematic ON NONE ON ON OFF ON -3 OPEN - SPDT GTMV3E Conn. Terms. Schematic Note: Pins 4 and 6 not connected OFF NONE ON OPEN N/ 3- ctuator Shown In Pos. PC MOUNTING GT Models F SPST Note: Pins 4 and 6 not connected GT omit hole. Toggle Dimensions are shown: Inches (mm) F 45

196 GT Series Sealed Ultraminiature Toggle Switches SWITCH FUNCTION POS. POS. POS. 3 PRT NUMER GTMV3E GT3MV3E ON NONE ON ON OFF ON Conn. Terms. -3, 5-6 OPEN -, 5-4 GTMV3E DPDT GT Models:, 3, 4 & 6 terminals only. Schematic DPDT ctuator Shown In Pos. PC MOUNTING GTMV3E Conn. Terms. OFF NONE ON OPEN N/ 3-, 6-4 Schematic DPST.50 (3,8).73 (6,93) GTMSE Horizontal ctuation SPDT.00 (5,08).00 TYP. (0,5).09 (,77).066 DI..053 (,35).340 (8,64) CTUTOR SHOWN IN POS. PC MOUNTING.5 (5,46).05 X.00 TYP. (0,38) X (0,5).050 TYP. (,7) EPOXY SEL 3.76 (7,0).00 TYP. (,54) TERM NOS. FOR REFERENCE ONLY 3 GT MODEL TERMS. & 3 ONLY PRT NUMER GTMSETR GT3MSETR Conn. Terms. Schematic SPDT GTMSETR Conn. Terms. Schematic SWITCH FUNCTION POS. POS. POS. 3 ON NONE ON ON OFF ON -3 OPEN - OFF NONE ON OPEN N/ 3- SPST Standard with tape & reel packaging, see page F-47. GT-omit pad. SWITCH FUNCTION POS. POS. POS. 3 PRT NUMER GTMSCETR GT3MSCETR Conn. Terms. ON NONE ON ON OFF ON -3 OPEN - GTMSCE SPDT ctuator Shown In Pos. PC MOUNTING Schematic SPDT Note: Pins 4 and 6 not connected GTMSCETR OFF NONE ON F Conn. Terms. Schematic OPEN N/ 3- Toggle Standard with tape & reel packaging, see page F-47. GT-omit pad. GT Models SPST Note: Pins 4 and 6 not connected F 46 Dimensions are shown: Inches (mm)

197 GT Series Sealed Ultraminiature Toggle Switches SWITCH FUNCTION POS. POS. POS. 3 GTMSCE DPDT Schematic DPDT PRT NUMER GTMSCETR GT3MSCETR Conn. Terms. GTMSCETR Conn. Terms. Schematic ON NONE ON ON OFF ON -3, 5-6 OPEN -, 5-4 OFF NONE ON OPEN N/ 3-, 6-4 ctuator Shown In Pos. PC MOUNTING GT Models DPST GT-omit pads & 5. Standard with tape & reel packaging TPE & REEL For part numbers GTMSE, GTMSE, GT3MSE REEL INFORMTION OUTSIDE DIMETER 3.00 (330,0) PILOT HOLE.5 (3,0) QUNTITY PER REEL 600 For part numbers GTMSCE, GTMSCE, GT3MSCE, GTMSCE, GTMSCE, GT3MSCE, REEL INFORMTION OUTSIDE DIMETER 3.00 (330,0) PILOT HOLE.5 (3,0) QUNTITY PER REEL 00 F Toggle F 47 Dimensions are shown: Inches (mm)

198 9000 Series Power Toggle Switches Features/enefits Power ratings up to 0 MPS Double pole models Locking lever options available Wide variety of actuator styles RoHS compliant and compatible Typical pplications Shut-off switch Small equipment UL Specifications CONTCT RTING: 90 Model GP (general purpose) 6 MPS 5 VC 50/60 Hz T85 0,000 cycles (0E3) 3 MPS 50 VC 50/60 Hz T85 0,000 cycles R (resistive) 6 MPS 30 VDC T85 0,000 cycles 9 Model: GP (general purpose) 0 MPS 5 VC 50/60 Hz T85 0,000 cycles 5 MPS 50 VC 50/60 Hz T85 0,000 cycles R (resistive) 0 MPS 30 VDC T85 0,000 cycles ELECTRICL LIFE: 5,000 make-and-break cycles at full load. CONTCT RESISTNCE: elow 0 m Ω typ. -4 V DC, 00 m. INSULTION RESISTNCE: 0 9 Ω min. DIELECTRIC STRENGTH:,500 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 85ºC. SOLDERILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). uild--switch Materials CSE: Diallyl phthalate (DP) (UL 94V-0). CTUTOR: rass, chrome plated. USHING: rass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: rass or steel, matte-tin plated. END CONTCTS: 90 Model: Coin silver, silver plated. 9 Model: Silver cadmium oxide. CENTER CONTCTS: Copper alloy, silver plated LL TERMINLS: 90 Model: Copper alloy, silver plated. 9 Model: Copper alloy, matte-tin plated. TERMINL SEL: Epoxy. HRDWRE: Nut & Locking ring: rass, nickel plated. Lockwasher: Steel, nickel plated. NOTE: ny models supplied with Q contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages F-49 thru F-5. For additional options not shown in catalog, consult Customer Service Center. Switch Function 90 DPDT, On-On, 6 mps 9 DPDT, On-On, 0 mps F Toggle ctuator S ntirotation,.40" high K Locking lever,.650" high ushing K Locking lever,.680" high H3.96" high, keyway L43 Lever handle with cap CW Splashproof P3 Flatted, anti-rotation,.450" high H.96" high, flat T.687" high, 5/3 bushing T.460" high, 5/3 bushing Terminations Z Solder lug Z4 Quick connect (9 only) V Vert. right angle, PC thru-hole (90 only) C PC Thru-hole F 48 Contact Material Q Silver Seal E Epoxy D No epoxy ctuator Color/Finish NONE right chrome lack ushing Finish NONE Nickel lack KXX ctuator Color/Finish NONE Natural aluminum lack anodized aluminum Dimensions are shown: Inches (mm)

199 9000 Series Power Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. POS. CONNECTED TERMINLS POS. POS. NO. POLES MODEL NO. RTING* SCHEMTIC DP MPS 0 MPS ON ON ON ON -3,5-6 -,5-4 DPDT DPDT /4 40 UNS- Part number shown: 90SH3ZQE Terminal Nos. Molded On Side Of Case * See CONTCT MTERIL, page F-5, for complete ratings. ll 9000 Series models meet international dimensional and electrical requirements. 9 model must be ordered with Z4 terminations and D seal option. CTUTOR CTUTOR CTUTOR FINISH S NTIROTTION,.40" HIGH P3 FLTTED, NTIROTTION,.450" HIGH OPTION CODE NONE CTUTOR FINISH NTURL LUMINUM With Nickel Plated ushing LCK NOTE: lack hardware is supplied when either black actuators or bushings are specified. ll hardware is available separately, see Section N. ntirotation is standard on all actuators, provides anti-push-in feature on actuator. Dress nut part number: supplied standard with P3 actuator. T.687" HIGH, 5/3 USHING T.460" HIGH, 5/3 USHING OPTION CODE NONE CTUTOR FINISH RIGHT CHROME With Nickel Plated ushing LCK 5/3-3 UNS- 5/3-3 UNS- NOTE: ushing option code not required for T & T actuators unless CW splashproof bushing ordered. lack hardware is supplied when either black actuators or bushings are specified. ll hardware is available separately, see Section N. F ntirotation is standard on all actuators except T & T, provides anti-push-in feature on actuator. Toggle Dimensions are shown: Inches (mm) F 49

200 9000 Series Power Toggle Switches K LOCKING LEVER,.650" HIGH, THREDED CTUTOR K CTUTOR LOCKING LEVER,.680" HIGH, THREDED CTUTOR FINISH Locking Positions /4-40 UNS- /4-40 UNS- Position Lock NOTE: To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. ushing option code not required. Overtightening mounting nut may cause actuator to bind.. OPTION CODE CTUTOR CP FINISH NONE NTURL LUMINUM With Nickle Plated ushing LCK NODIZED LUMINUM L40 LEVER HNDLE WITHOUT CP L43 PLSTIC LEVER HNDLE WITH NTIROTTION ND CP, P/N 48 OPTION CODE CTUTOR CP COLOR LCK NONE No ctuator Color (L40 option) Other colors available, consult Customer Service Center. No color choice required. Finish: Matte NOTE: Lever handle actuator L43 supplied, but not installed. For interchangeability, order L40 actuator option and order lever handles separately, see page F-5. ntirotation is standard on all actuators, provides anti-push-in feature. USHING USHING USHING FINISH H3.96" HIGH, THREDED, KEYWY H.96" HIGH, THREDED, FLT CW SPLSHPROOF, 5/3 USHING F Toggle /4-40 UNS- /4-40 UNS- Will withstand in./lbs. of torque with no distortion. NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. lack hardware is supplied when either black bushings or actuators are specified. Optional mounting nut and locking ring styles and finishes available, see Section N. 5/3-3 UNS- For T & T actuators only. Internal actuator seal standard. External bushing seal available separately from PM Hexseal, part # MFS OPTION CODE USHING FINISH NONE NICKEL LCK F 50 Dimensions are shown: Inches (mm)

201 USHING USHING 9000 Series Power Toggle Switches USHING FINISH PNEL MOUNTING /4-40 UNS- 5/3-3 UNS-.47 DI. (,99).47 DI. (,99) Without locking ring. With standard locking ring. With small locking ring. Without locking ring. With standard locking ring. TERMINTIONS Z SOLDER LUG C PC THRU-HOLE PC MOUNTING 90 Only 90 Only Z4.87" QUICK CONNECT 9 Only NOTE: Only termination available with 9 model. Must be ordered with D seal option. Mates with standard.87 Nema female connector. V VERTICL RIGHT NGLE, PC THRU-HOLE SECTION - 90SH3VQE Vertical ctuation DPDT ctuator Shown in Pos. 3 PC MOUNTING Terminal Nos. For Reference Only 90 Only NOTE: Terminal bend radii and lead-in manufacturing option. Terminal spacing greater than 3mm at all points. F Toggle Dimensions are shown: Inches (mm) F 5

202 .945 (4,0).657 (6,7) 9000 Series Power Toggle Switches CONTCT MTERIL OPTION CODE MODEL CONTCT MTERIL TERMINL PLTING RTINGS 90 SILVER, SILVER OR TIN,5 GP (general purpose) 6 MPS 5 VC 50/60 Hz T85 0,000 cycles (0E3) 3 MPS 50 VC 50/60 Hz T85 0,000 cycles R (resistive) 6 MPS 30 VDC T85 0,000 cycles Q 9 SILVER CDMIUM OXIDE 3,4,6 TIN 5 GP (general purpose) 0 MPS 5 VC 50/60 Hz T85 0,000 cycles 5 MPS 50 VC 50/60 Hz T85 0,000 cycles R (resistive) 0 MPS 30 VDC T85 0,000 cycles * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. END CONTCTS: Coin silver, silver plated. CENTER CONTCTS & LL TERMINLS: Copper alloy, silver plated. 3 END CONTCTS: Silver cadmium oxide. 4 CENTER CONTCTS: Copper alloy, silver plated. 5 Z4 TERMINLS ONLY: Copper alloy, matte-tin plated. 6 Cadmium in electrical switch contacts is exempt from RoHS. NOTE: ny models supplied with Q contact material are RoHS compliant. ll 9000 Series models meet international dimensional and electrical requirements. 9 model must be ordered with Z4 terminations and D seal option. SEL E EPOXY SEL D NO EPOXY SEL Not available with 9 model or Z4 terminations. Must be ordered with 9 model and Z4 termination. Cap Compatible with S actuator VILLE HRDWRE Cap Compatible with S actuator L43 ctuator.843 (,4).383 (9,73).3 (7,9) PRT NO WHITE LCK RED Material: Polyethylene Finish: Matte PRT NO WHITE LCK RED Material: Vinyl Finish: Matte PRT NO LCK RED Material: Nylon Finish: Matte NOTE: dditional nuts, locking rings and lockwashers available separately, see Section N. Other colors available, consult Customer Service Center. 759D0000 Sealing oot 703D0000 Sealing oot 704D0000 Sealing oot.04 (5,).658 (6,7) ø.33 (8,4) 6 [0.630] ø [ 0.079].464 (,79) F Toggle /4-40 uns- nut.54 (3,3) NOTE: For use with S actuator style when combined with H3 and H bushings 5/3-3 NS- NOTE: For use with T style actuator 5/3-3, NS- NOTE: For use with T style actuator Dimensions are shown: Inches (mm) F 5