Typical Applications Handheld products Identification POS Automotive. Switch Electrical Data. Environment Data. Card Presence. Operating Life Switch
|
|
|
- Tobias Hart
- 6 years ago
- Views:
Transcription
1 CCM3 Series Features SIM/SM card acceptance Hinged and fixed covers Compatible with pick and place and lead free soldering Typical pplications Handheld products Identification POS utomotive SIM/SM Mechanical Number of Contacts 6 or 8 Mechanical life, hinged cover, cycles min Mechanical life, fixed cover 5, cycles Card insertion force Hinged cover: N max Fixed cover: 3N max Card extraction force Hinged cover: N max Fixed cover: N min / 3N max Contact force,5n min /,5N max Slide locking force N min / 6N max,8n max. for complete depression Vibration Frequency to 5 Hz. cceleration 5m/s Duration 6 hours - amplitude,35 mm Max electrical discontinuity µs Shock Soldering Process Compatible with lead free SMT soldering process Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength Peak value 5 m/s Duration ms 3 shocks in each direction of each axis, MΩ min mω max µ min / max 75 Vrms min Switch Electrical Data Card detection switch Normally open Contact resistance mω max Dielectric strength 5 Vrms min Current rating m min / m max Maximum power. V Environment Data Operating temperature -4 C to +85 C Damp heat IEC 5 test number c ( days) Salt mist IEC 5 test number f (96 hours) RoHS compliant Designation Contact Plating Cover # of Contacts PCB Version Card Presence Operating Life Switch Total Height (mm) Dim. (mm) Packaging CCM3-3LFT inlay hinged 6 without,,55 7, x reels of, pcs CCM3-3LFT inlay hinged 6 plastic pegs without,,55 7, x reels of, pcs CCM3-33LFT inlay hinged 8 without,,55 7, x reels of, pcs CCM3-34LFT inlay hinged 8 plastic pegs without,,55 7, x reels of, pcs CCM3-39LFT gold hinged 6 without,,55 7, x reels of, pcs CCM3-3LFT gold hinged 6 plastic pegs without,,55 7, x reels of, pcs CCM3-3LFT gold hinged 8 without,,55 7, x reels of, pcs CCM3-3LFT gold hinged 8 plastic pegs without,,55 7, x reels of, pcs CCM3-33LFT gold hinged 6 with,,55 7, x reels of, pcs CCM3-35LFT gold hinged 6 Large soldering pads* without,,55 7, x reels of, pcs CCM3-359LFT gold hinged 6 White cover without,,55 7, x reels of, pcs CCM3-354LFT gold fixed 8 without 5,,85 7, x 5,5 reels of, pcs CCM3-355LFT gold fixed 6 without 5,,85 7, x 5,5 reels of, pcs CCM3-3535LFT inlay fixed 6 without 5,,85 7, x 5,5 reels of, pcs CCM3-3754LFT inlay fixed 6 with, 3,5 6,5 x 8,5 reels of, pcs CCM3-376LFT inlay fixed 6 without, 3,45 6,5 x 5,85 reels of, pcs CCM3-3764LFT inlay none 6 with,,9 6,5 x 5,85 reels of, pcs * Can go through reflow upside down 8
2 CCM3-3 LFT / CCM3-39 LFT CCM3 Series 5,5±,, 3,5 x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails),7 5,3 8,6 8?max 5,4±, 8,4 (5) (7,) SEE DETIL,5 () 5,65±, 3,8 3,5,45 R,9,5 DETIL,65, -, SIM/SM,5 7, (5) R,9 3,8 3,8 x RECOMMENDED PC BORD LYOUT 3, 5,5,5 5,5,8 5,7 8,6 x,54 5,5 C, 9
3 CCM3 Series CCM3-3 LFT / CCM3-3 LFT, B 5,5±, 3,5 SIM/SM,55 (,7 max. includes solder tails),6 5,8,7 5,3,6 SEE DETIL 5,65±, 3,8,3,5 3,5,45 R,9,5 x,54 8,6,7,7,65 ø±,5 DETIL 8 max x ø, B, -, 5,4±, 8,4 MICROSIM CRD () (5) (7,),5 7, (5) R,9 3,8 3,8 RECOMMENDED PC BORD LYOUT x 3,,3 +, ø, x ø, 5,5,5 5,5,8,44,6 5,8,7 8,6 x,54 5,5 6,35 C, 3
4 CCM3-33 LFT CCM3 Series 5,5±,, 3,5 3x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails),7 5,3 8,6 8?max 5,4±, 8,4 (5) (7,) SEE DETIL,5 () 5,65±, 3,8 3,5,45 R,9,5 DETIL,65, -, SIM/SM,5 7, (5) R,9 3,8 3,8 x RECOMMENDED PC BORD LYOUT 3, 5,5,5 5,5,8 5,7 8,6 3x,54 C8 5,5 C C4, 3
5 CCM3 Series CCM3-34 LFT 5,5±,, B 3,5 3x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails),6 5,8,7,6,3 5,3 8,6 8 max 5,4±, 8,4 (5) (7,) SIM/SM SEE DETIL 5,65±, 3,8,5 3,5,45 R,9,5,7 ø±,5 DETIL,65 x ø, B, -, () ø3,5,5 7, (5) R,9 3,8 3,8 RECOMMENDED PC BORD LYOUT x 3,,3,44 +, ø, x ø, 5,5,5 5,5,8,6 5,8,7 8,6 3x,54 C8 5,5 6,35 C C4, 3
6 CCM3-3 LFT CCM3 Series 5,5±,, 3,5 3x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails),7 5,3 8 max 5,4±, 8,4 (5) (7,) SEE DETIL,5 () 5,65±, 3,8 3,5,45 R,9,5 DETIL,65, -, SIM/SM,5 7, (5) R,9 3,8 3,8 x RECOMMENDED PC BORD LYOUT 3,,5 5,5 5,5 5,8,7 8,6 3x,54 C8 5,5 C C4, 33
7 CCM3 Series CCM3-3 LFT 5,5±,, B 3,5 3x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails),6 5,8,7,6,3 5,3 8,6 8 max 5,4±, 8,4 (5) (7,) SIM/SM SEE DETIL,5 5,65±, 3,8 3,5,45 R,9,5,7 ø±,5 DETIL,65 x ø, B, -, (),5 7, (5) R,9 3,8 3,8 RECOMMENDED PC BORD LYOUT x 3,,3,44 +, ø, x ø, 5,5,5 5,5,8,6 5,8,7 8,6 3x,54 C8 5,5 6,35 C C4, 34
8 CCM3-33 LFT CCM3 Series 5,5±,, 3,5,55 (,7 max. includes solder tails),7 5,3 3x,54 8,6,7 8 max 3,8 3,8 5,4±, 8,4 MICROSIM CRD (5) SEE DETIL,5 5,65±, 3,8 3,5,45 R,9,5,65 DETIL, -, Plastic actuator DETIL insulated blade switch SIM/SM,5 7, (5) R,9 3,8 3,8 x,7 8,6 3x,54 RECOMMENDED PC BORD LYOUT 3,,5 5,5 5,5 5 SW 5,5,8 C SW, () (7,) 35
9 CCM3 Series CCM3-35 LFT 6,9±, x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails), 3,5 (,3) (5) 8 max,7 5 ',3 7,33±,5 5 3,8 3,8 5,4±, 8,4 (7,) SEE DETIL,5 DETIL (6,9) () (9,95) SIM/SM 5,65±, 3,8 3,5,45 R,9,5,65 (6,9), -,,5 7, (5) R,9 3,8 3,8 x RECOMMENDED PC BORD LYOUT,95 3,5,95 5,5,5 5,5,4,8,7 8,6 x,54 3,8 3,8 6,9 C,5 36
10 CCM3-359 LFT CCM3 Series 5,5±,, 3,5 x,54,7 MICROSIM CRD,55 (,7 max. includes solder tails),7 5,3 8,6 8 max 3,8 3,8 5,4±, 8,4 (5) SEE DETIL,5 5,65±, 3,8 3,5,45 R,9,5 DETIL,65, -, SIM/SM ø3,5,5 7, (5) R,9 3,83,8 RECOMMENDED PC BORD LYOUT x 3,,5 5,5 5,5 5,8,7 8,6 x,54 5,5 C, () (7,) 37
11 CCM3 Series CCM3-354 LFT / CCM3-355 LFT 5,5±, SIM/SM,85 (3 max includes solder tails) 7,±,5 8,6,7 3x,54 +, 5,,3 3 B, 5,5,9,75,5,6,65,54,5±,5,45 +,5 ø,4,7 SEE DETIL 3,8 3,8 Card stop,3±,,, -, DETIL,5 min 4 B,9,3 ø,6 +,5,4,75 5 RECOMMENDED PC BORD LYOUT x 3, +,5 ø,4 x 5,5,5 5,5,44,54,8 8,6,7 3x,54 C8 3,8 3,8 5,5 6,35 C C4,,7 (3,45) (9,75) (7,) 38
12 CCM LFT CCM3 Series, 7,±,5 +, 5, 3 ' B, 5,5,65,5±,5,45 +,5 ø,4,5 min SIM/SM B ø,6 +,5,4 5,8,9 5,5±,,75,5 8,6,7,85 (3 max includes solder tails) x,54,54,7,3 3,8 3,8,6 SEE DETIL,3±, DETIL 4 ' Card stop, -,,9,3,75 RECOMMENDED PC BORD LYOUT x 3, +,5 ø,4 x 5,5,5 5,5,44,54 8,6,7 x,54 C,,7 (3,45) (9,75) (7,) 3,8 3,8 5,5 6,35 39
13 CCM3 Series CCM LFT,5±,5 x 45,±,5-3,8 3,8 6 F SEE DETIL, -, DETIL Date code updated (6,5) (9,9) (5,85) 4,5±, 3,8±, (4,5) (3,8),8 5,9,4,4 +,5,9 +, 5 -,5,3,6 R SIM/SM 6,5,,7,5 8,5 (4,34) XXXX 4,9 5, 9, Card stop,9±,5 7 x,95±,,3 +,,75 -,5 6,5 (),54,54,54,54,7,7 3,5 3,5 5,3 RECOMMENDED PC BORD LYOUT x,7,95 3,8,75 8,5,54 C,54,,54,7 SW,54 SW 5,9 3,8 3,8,65 4,5 3,8 Switch contact foot area x 4
14 CCM3 Series CCM3-376 LFT COUPE - DETIL,5 ±,5 x 45,±,5 3,8 3,8 SEE DETIL (6,5) (9,9),8 5,9,4,75,3 R (4,34), -, (5,85) 4,5±, (4,5),4 +,5,9,6 6,5,,5,7 8,5 XXXX Card stop 6,5 (7,8),54,54,7,7 5,3 SIM/SM 4,9 5, 9, +,,75 -,5 3,5 RECOMMENDED PC BORD LYOUT x,7,95,75 8,5,7,54 C,54, 5,9 3,8 3,8,65 4,5 4
15 CCM LFT,5 ±,5 x 45 3,8 3,8 (6,5) (9,9),8 5,9,75,3 (4,34), -, CCM3 Series 6 F SEE DETIL 4,5±, 3,8±, (4,5) (3,8) (5,85) +,5,9,6 SIM/SM 6,5,,7,5 XXXX Card stop,9 ±,5 7,95±,,3 6,5 8,5,54,54,54,54,7,7 +,,95 Top card level recommended 5,3 4,9 5, 9, x +,,75 -,5 (),9 x,7 RECOMMENDED PC BORD LYOUT,95 3,8,75 8,5,54 C,54,,54,54,7 SW SW 3,8 3,8,65 Switch contact foot area x 5,9 4,5 3,8 4
Features Operating life 500,000 cycles Insertion force 40N EMV PCI & PCI ready. Card detection switch. PCI Features
CCM2 MK2 Series Features Operating life 5, cycles Insertion force 4N EMV PCI & PCI ready Card detection sealed switch Typical pplications Transaction Identification POS Mechanical Number of Contacts 8
Design Features of C&K Smart Card Connectors
Design Features of C&K Smart Card Connectors C&K Components has a successful track record of manufacturing innovative interconnect devices with a strong emphasis on reliability and flexibility. s a long
Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data.
1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 59 The is a connector for MultiMediaCards. These cards have been developed as small form factor memory cards with ROM and RAM capabilities. The connector provides
Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
PRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
RTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
Interface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
CAS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION C A S T B 1. Please refer to the LIST OF PART NUMBERS when placing orders.
SLIDE SWITHES (SMD) AS RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES over Polyphenylenesulphide Slider Housing Slider contact Polyamide Polyphenylenesulphide UL94V- Fixed contact
MicroStac. 0.8 mm Connectors ED Full-Scale MicroStac 50 Pins Catalog E
MicroStac 0.8 mm Connectors ED. 12 11.2016 Full-Scale MicroStac 50 Pins Catalog E 074521 MEZZANIN CONNECTOR SYSTEM GENERAL MicroStac singleand dual-row versions MicroStac connector series features hermaphroditic
MicroStac 0.8 mm Mezzanine Connector System. Catalog E /09 Edition 9
MicroStac 0.8 mm Mezzanine Connector System www.erni.com Catalog E 074521 04/09 Edition 9 www.erni.com Catalog E 074521 04/09 Edition 9 Table of Contents Applications...........................................................................................2
SPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
MicroStac 0.8 mm Mezzanine Connector System. Catalog E /09 Edition 10
MicroStac 0.8 mm Mezzanine Connector System www.erni.com Catalog E 074521 04/09 Edition 10 www.erni.com Catalog E 074521 04/09 Edition 10 Table of Contents Applications....2 Technical Features....3 Mating
2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
![2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)](/thumbs/96/127052325.jpg "2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)")
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
Features Sealed Construction for Automatic Soldering. Contact form. Operating Force SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO SPST- NO
B3W Features Sealed Construction for Automatic Soldering Available in two sizes: 6x6mm (1) and 12x12mm square (4) Ideal for applications such as audio, office and communications equipment, measuring instruments,
Mini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS Quick Selector Chart Spring-loaded connectors and Pad connectors TEL +1 32 21 0 00 2 mm 2.5 mm 3 35, 36 35, 36 Surface mount perpendicular with positioning
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
MicroSpeed Power Modules.
MicroSpeed Power Modules www.erni.com Katalog Catalog D E 074587 074518 09/08 Ausgabe 3, 03/05 Edition www.erni.com 1 1 www.erni.com Catalog E 074587 09/08 Edition 1 Table of Contents General..............................................................................................2
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
Metal Oxide Varistor:TVB Series
Features. RoHS compliant 2. Available for SMT flow/reflow soldering 3. Low profile and space saving 4. Large capability to withstand high surge current 5. Low inductance construction with excellent response
High-Reliability at 1.25mm pitch
High-Reliability at 1.25mm pitch Why a micro-miniature connector? A demand for a smaller footprint, an increasing number of high density opportunities, and a requirement for a lightweight connector solution,
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
microsd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
Mini PCI Express & msata Connector
09.Mar.2012 Rev. C Mini PCI Express & msata Connector 1 Scope: 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of MINI PCI
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
JJ Series Detector Switches
Applications JJ Series Detector Switches Automotive Instrumentation White goods Telecommunications Benefits RoHS Compliant Halogen and Lead Free Sharp detection feeling Compact Size TE Connectivity is
ELUM TM Series Right Angle Illuminated Latching Pushbutton
LED FREE COMPTIBLE OPTION ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N.C.) Low height above PCB Reliable self-cleaning contact Surface-mount or thru-hole PCB Standard
2.54 mm Single Row Connector (SRC) MaxiBridge.
2.54 mm Single Row Connector (SRC) www.erni.com Katalog Catalog D E 074591 074518 02/10 Ausgabe 3, 03/05 Edition www.erni.com 7 1 www.erni.com Catalog E 074591 02/10 Edition 7 Table of Contents General..............................................................................................2
microsd Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Top-actuated (B3U-1000 Series)
Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.
HMI Components. Series. Pushbutton Illuminated pushbutton. Audio and video mm mm mm
Edition 12/2014 HMI Components 95 Series Characteristics The Series 95 PCB pushbuttons can be used in combination with 1.5 to 2.5 mm PCBs. The buttons are selfattaching until they are soldered. Depending
minisd TM Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
New relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 8A Reflow Solderable Relay JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO)
PRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
Meet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
2.54 mm Single Row Connector (SRC) MaxiBridge.
2.54 mm Single Row Connector (SRC) www.erni.com Katalog Catalog D E 074593 074518 Ausgabe 02/10 3, 03/05 www.erni.com Edition 7 1 www.erni.com Catalog E 074593 02/10 Edition 7 Table of Contents General...2
PC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards)
PC Card Single Slot SMT Connectors for the V Market (that Support 5 V Cards) IC15 Series Reliable card ejection 2-point card ejection Card ejection distance 6mm min Equipment outline Stroke: 11.7mm Ejection
Devices raised mounting
Devices raised mounting Illuminated actuator pushbutton Front protection Switching system Ø 29 mm Contacts Typ-Nr. e Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.36 1 4 17 12.15 M UT 14-436.36
SIGNAL RELAY. FTR-C2 Series. 2 POLES - 2A High Isolation Wide Contact Gap FTR-K1 SERIES FEATURES
FTR-K1 SERIES SIGNAL RELAY 2 POLES - 2A High Isolation Wide Contact Gap FTR-C2 Series FEATURES DPDT 2A Contact gap: more than 2.0mm Conforms to IEC60950 / EN60950 / UL1950/ CSA C22.2 No.950 Working voltage
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture
Devices raised mounting
Devices raised mounting Illuminated pushbutton actuator Illuminated pushbutton actuator Front protection Switching system Contacts Diode (1N 47) Switching action Terminals b 18 x 18 mm Typ-Nr. a 18 x 24
2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-703 Revision: 1.1 Issue Date: OCT. 25, 2007 HAMBURG INDUSTRIES CO., LTD. 6FL., NO.12, Lane 270, SEC. 3, Pei Shen RD., Shen Keng Hsiang, Taipei Hsien, Taiwan
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
USB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Sealed snap-action pushbutton switches bushing Ø 12 mm momentary
SW-IM-709 DISTINCTIVE FEATURES Snap-action : tactile feedback with audible click High current/voltage rating Sealed to IP67 Flat round actuator for optional marking NO+NC ENVIRONMENTAL SPECIFICATIONS Front
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
Highly reliable IC-size type with gold contact supports automatic insertion. Typical Specifications
to 0 Circuits-designed Type Product Line Soldering Highly reliable IC-size type with gold contact supports automatic insertion Actuator configuration Packaging style Typical Specifications Poles 5 Minimum
Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
MAXIMUM SOLUTIONS (2/14 -- PR606) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY Fax:
MAXIMUM SOLUTIONS Mill-Max Series 854 Single Row and 855 Double Row Pitch Surface Mount and Through-Hole Spring-Loaded Connectors and Mating Target Connectors Mill-Max has developed high density, (1,27
ULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
Contact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
JV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
2 POLES - 2 A (Slim Profile Signal Relay)
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum
2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
Contact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect
V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used
SPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
onlinecomponents.com
Short-Travel Switch MICON 5 SMT standard version SMT low version THT standard version Order no. Terminals Height [mm] Operating Force F1 [N] (+- 20% ) Switching Travel S2 [mm] (+- 0.15 mm) Operating life
CFS SLIDE SWITCHES (FULL PITCH) C F S T B FEATURES APPLICATIONS PART NUMBER DESIGNATION COPAL ELECTRONICS. RoHS compliant INTERNAL STRUCTURE
RoHS compliant INTERNA STRUTURE FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact Part name over Slider Housing Material Polyphenylenesulphide Polyamide Polyphenylenesulphide
USB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
SIM Card Sockets. ID1 Series. Features. Applications
SIM Card Sockets ID1 Series Miniature and Thin Photograph (1) Features 1. Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber
Spring Loaded Contacts
Spring Loaded Contacts Spring Probes ATE Test Probes Slim probes for automated testing Harwin supply a variety of Spring Probes, suitable for use on manual test jigs and automatic test equipment (ATE)
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
ES3 Series (WF2 Type) (culus Certified Product)
COMPONENTS PRODUCT INFORMATION NEW Board-to Cable Connector For LED Lighting Power Supply ES3 Series (WF2 Type) (culus Certified Product) CONNECTOR MB-0227-3 July 2012 RoHS Compliant Receptacle (ES3B002WF2)
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 70 C: CR0603-0.10 W, CR0805-0.125 W, CR1206-0.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three
2.54 mm Single Row Connector (SRC) MaxiBridge.
2.54 mm Single Row Connector (SRC) www.erni.com Katalog Catalog D E 074593 074518 10/08 Ausgabe 3, 03/05 Edition www.erni.com 4 1 www.erni.com Catalog E 074593 10/08 Edition 4 Table of Contents General..............................................................................................2
40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD
PCBeam Connector for 40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD Neoconix P/N: FBX0040CMFF6AU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.06mm mated height
2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
AEM GcDiode TM ESD Suppressors
Part Number: ES0603V014BT, ES0402V014BT Features Glass ceramic monolithic structure Ultra low capacitance (0.25pF typical) Low leakage current (
Cover. Slider C F S T B
RoHS compliant INTERNA STRUTURE FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact APPIATIONS Part name over Slider Housing Slider contact Fixed contact Terminal pin Material
Signal Relays AXICOM. P1 Relay V23026
P1 Relay V23026 n Directly triggerable with TTL standard modules as ALS, HCT & ACT n Slim line 13.5x7.85mm (0.531x0.309 ) n Switching current 1 A n Bifurcated 1 form C (CO) contact n Immersion cleanable
APPLICATION SPECIFICATION
IPASS 0.8mm PITCH I/O CONNECTOR 1.0 SCOPE...2 2.0 PRODUCT DESCRIPTION...2 2.1 PRODUCT NAME AND SERIES NUMBER...2 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS...2 3.0 REFERENCE DOCUMENTS...2 3.1 MOLEX