CHAPTER GETTING STARTED. In This Chapter...

Size: px

Start display at page:

Download "CHAPTER GETTING STARTED. In This Chapter..."

Lizbeth George
5 years ago
Views:

1 GETTING STRTE HPTER In This hapter... Introduction onventions Used Mounting lips New Style Product Overview Part Number Key Touch Panels EZTouch onversion and Mounting EZTouch Touch Panel ross Reference to -more Quick Start Steps Step Unpack and Inspect Step ssemble Temporary Support Stand Step Install Optional Hardware ccessories Step ecome Familiar with vailable ommunication Ports Step Install the Programming Software and evelop a Project Step onnect Touch Panel to omputer Step Provide Power to the Touch Panel Step ccess the Touch Panel Setup Screens Step hoose Touch Panel to PL Protocol & ables Step 0 onnect Touch Panel to PL

2 hapter : Getting Started 0 Introduction The Purpose of this Manual Thank you for purchasing our -more Touch Panel family of products. This manual describes utomationirect.com s -more Touch Panels, their specifications, included components, available accessories and provides you with important information for installation, connectivity and setup. The manual shows you how install, wire and use the products. It also helps you understand how to interface the panels to other devices in a control system. This user manual contains important information for personnel who will install the touch panels and accessories, and for the personnel who will be programming the panel. If you understand control systems that make use of operating interfaces such as the -more touch panels, our user manuals will provide all the information you need to get, and keep your system up and running. Supplemental Manuals If you are familiar with industrial control type devices, you may be able to get up and running with just the aide of the Quick Start Guide that is included with each touch panel. You can also refer to the On-line help that is available in the -more programming software for more information about programming the panel. The accessories include data sheets that will help with installing the accessories. Technical Support We strive to make our manuals the best in the industry. We rely on your feedback to let us know if we are reaching our goal. If you cannot find the solution to your particular application, or, if for any reason you need technical assistance, please call us at: 0 00 Our technical support group will work with you to answer your questions. They are available Monday through Friday from :00.M. to :00 P.M. Eastern Time. We also encourage you to visit our web site where you can find technical and non-technical information about our products and our company. If you have a comment, question or suggestion about any of our products, services, or manuals, please fill out and return the Suggestions card that was included with this manual. E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

3 hapter : Getting Started onventions Used When you see the notepad icon in the left-hand margin, the paragraph to its immediate right will be a special note. The word NOTE: in boldface will mark the beginning of the text. When you see the exclamation mark icon in the left-hand margin, the paragraph to its immediate right will be a warning. This information could prevent injury, loss of property, or even death (in extreme cases). The word WRNING: in boldface will mark the beginning of the text. Key Topics for Each hapter The beginning of each chapter will list the key topics that can be found in that chapter. Mounting lips New Style Getting Started In This hapter... HPTER General Information...- Specifications...- NOTE: -more touch panels shipped prior to approximately pril 00 had a slightly different mounting clip design. ll of the drawings and illustrations in this issue of the Hardware User Manual are shown with the newer design. ppendix : Mounting lips Prior pril 00 contains drawings and illustrations of the original designed mounting clips for your reference. 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

hapter : Getting Started 0 Product Overview Some of the features designed into the product to provide excellent hardware and software are listed below.

4 hapter : Getting Started 0 Product Overview Some of the features designed into the product to provide excellent hardware and software are listed below. nalog touch screen (no touch cell boundaries) Plenty of memory and methods to get data in/out of the panel Overlapping active devices on the touch screen, colors for enhanced graphics Screen resolutions up to 0 X pixels uilt-in project simulation; test on P while developing Serial RS, RS/ and Ethernet 0/00ase-T communications (Ethernet available on full feature units only.) Programming via US or Ethernet (Ethernet available on full feature units only.) Optional / power adapter (E-) User replaceable bulbs and bezels on, 0, and panels nimation of bitmaps and objects,000 built-in symbols, classic fonts: x, x, x, x, x, x, x, x, x, x, and Windows fonts PI face plate, trending, alarming and a recipe database Event Manager to trigger actions based on assigned state changes, schedules, PL tag names, etc. setup in a database environment. The event can also trigger a sound byte, initiate a screen capture, send a data file (FTP), send an , etc. Select unique background screens for each created screen Trend ata logging Internet Remote ccess uilt-in FTP client/server, client, and Web server udio output port - stereo, requires amplifier and speaker(s) E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

5 hapter : Getting Started Part Number Key Touch Panels The -more touch panel part numbers consist of the following key: Screen Size: :. :. 0: 0. :. :.0 L Type: S: STN T: TFT Product label examples: E-TL-R E-T E-xxxx-x Serial Number and ate ode formats: Features: L: LE Features: blank: Full R: ase olor: : olor M: Grayscale Serial Number = [Part Number]+[YYMFNNN] ate ode = YYMF YY: Year (0 --- e.g. 0 = 00) M: Month (, X, Y, Z --- e.g. X = Oct.) : ay ( ) F: Manufacturing Site (0, Z) NNN: Sequence number for the date listed (000 ) 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

hapter : Getting Started 0 EZTouch onversion and Mounting -more panels are a drop-in replacement for EZTouch panels from utomationirect. They fit the same panel cutout*.

6 hapter : Getting Started 0 EZTouch onversion and Mounting -more panels are a drop-in replacement for EZTouch panels from utomationirect. They fit the same panel cutout*. The -more software will convert your legacy EZTouch project (created with EZTouch Edit ver..a) automatically with no changes to the project required.** Just open your old EZTouch project in the new -more Programming Software, connect the US cable, and click "Send to Panel". The conversion is automatic and you will benefit immediately from: better looking display brighter screen Longer backlight bulb life Wider temperature tolerance two year warranty Note: EZTouch projects most have been created with EZTouch Edit software version.a to assure proper project conversion. Now, there are hundreds of new features you may want to take advantage of, but it's nice to know that you can be up and running your existing EZTouch project in just a few minutes. -more accepts the same PL communications and networking cables that you are using with EZTouch. The V power connections accept the same wiring that you used for EZTouch, and now there is a removable terminal block connector. Only the programming cable is different - you no longer have to buy a proprietary serial cable to program your touch panel. -more uses a standard US cable or an Ethernet (T) connection for programming. * If you have an old " non-slim bezel EZTouch panel you will need our " dapter Plate, part number E--PTR, see the chapter on accessories. ** The project conversion utility is a great feature. However the user must take full responsibility in ensuring the conversion works to their satisfaction. Example of a -more touch panel mounted into an existing EZTouch non-slim bezel cutout using the -more adapter plate. E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

7 hapter : Getting Started EZTouch Touch Panel ross Reference to -more EZTouch EZTouch, grayscale STN (0 ) -more dapter EZ-SM-R Requires: E--PTR EZ-SM-RS EZ-SM-F Requires: E--PTR EZ-SM-FS EZTouch EZTouch, olor STN (0 ) -more dapter EZ-S-K Requires: E--PTR EZ-S-KS EZ-S-F Requires: E--PTR EZ-S-FS EZ-S-FST EZ-S-F EZ-S-FS EZ-S-FST EZTouch EZTouch, olor STN (0 0 ) -more* -more, grayscale STN (0 0 ) E-SM-R E-SM (includes Ethernet) -more* -more,, olor TFT (0 0 ) E-TL-R E-TL (includes Ethernet) -more* -more,, olor TFT (0 0 ) E-T (includes Ethernet) *Note: ll -more touch panels meet UL type X when mounted on a flat surface of a type X indoor use only enclosure. Non-F 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

hapter : Getting Started 0 EZTouch Touch Panel ross Reference to -more (cont d) EZ-S0-F

EZTouch No EZTouch available EZTouch EZTouch, olor TFT (0 ) -more* -more 0,, olor TFT (0 0 )

(includes Ethernet) E-T (includes Ethernet) *Note: ll -more touch panels meet UL type X when

8 hapter : Getting Started 0 EZTouch Touch Panel ross Reference to -more (cont d) EZ-S0-F EZ-T0-FS EZ-T0-FST EZ-T0-FSE EZ-T-FS EZ-T-FST EZ-T-FSE EZTouch EZTouch 0, olor TFT (0 0 ) EZTouch No EZTouch available EZTouch EZTouch, olor TFT (0 ) -more* -more 0,, olor TFT (0 0 ) -more* -more,, olor TFT (0 0 ) -more* -more,, olor TFT (0 0 ) E-T0 (includes Ethernet) E-T (includes Ethernet) E-T (includes Ethernet) *Note: ll -more touch panels meet UL type X when mounted on a flat surface of a type X indoor use only enclosure. Non-F E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

hapter : Getting Started Quick Start Steps Step Unpack and Inspect a.

Included in the carton are the following: -more Touch Panel cutout template mounting clips temporary support

Mounting lips and power connector located in here.

) Unpack any accessories that have been ordered, such as: / Power dapter, Expansion ssembly, ompactflash

9 hapter : Getting Started Quick Start Steps Step Unpack and Inspect a.) Unpack the -more Touch Panel from its shipping carton. Included in the carton are the following: -more Touch Panel cutout template mounting clips temporary support stand power connector gasket Quick Start Guide, p/n E-QSG Temporary Support Stand utout Template located here. Mounting lips and power connector located in here. Power dapter E- Shipping arton ontents Optional ccessories Expansion ssembly E-EXP-OPT b.) Unpack any accessories that have been ordered, such as: / Power dapter, Expansion ssembly, ompactflash memory, programming cable, communications cable, etc. c.) Inspect all equipment for completeness. If anything is missing or damaged, immediately call the utomationirect returns ompact Flash ard E-F-R gb US Pen rive SZ E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

10 hapter : Getting Started 0 Step ssemble Temporary Support Stand & Touch Panel Temporary Stand Shipping arton Packing Material 0, & Touch Panel Temporary Stand Insert tabs between layers Shipping arton Packing Material NOTE: See hapter : Installation and Wiring for -more touch panel installtion information including cutout dimensions and mounting clearances. 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

hapter : Getting Started Step Install Optional Hardware ccessories NOTE: ompactflash memory card designations F Slot # is at the top of the panel and F Slot # is the F ard Interface Module, p/n

11 hapter : Getting Started Step Install Optional Hardware ccessories NOTE: ompactflash memory card designations F Slot # is at the top of the panel and F Slot # is the F ard Interface Module, p/n E-F-IF. -more Touch Panel ompact Flash Memory ard E-F-R / Power dapter E- F card plugs into slot # at top of panel F ard Interface Module E-F-IF F card interface module installs in right slot only, left slot for future Expansion ssembly E-EXP-OPT NOTE: The -more touch panels will fit into the existing cutout of any EZTouch slim bezel panel. Use the -more dapter Plate, p/n E--PTR, to install -more panels into existing cutouts of EZTouch non-slim (rounded bezel) panels. dapter Plate E--PTR Optional ccessories -pin Terminal lock dapter E-OMON- ate code ountry of Origin KOYO ELETRONIS INUSTRIES O., LT. E-OMON- GN S S+ R R+ TERM ate code ountry of Origin KOYO ELETRONIS INUSTRIES O., LT. E-PTR- IOIOI PL US Pen rive SZ-0-0 -pin 0 egree omm. Port dapter E-PTR- 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

12 hapter : Getting Started 0 Step ecome Familiar with vailable ommunication Ports For Future Use udio Line Out, stereo, Volt rms,.mm Mini Jack (mplifier Required) US Port - Type Programming/ownload Pin Signal Vbus + GN Shell Shield ompact Flash memory slot # is located at the top of panel. PL Serial ommunications US Port - Type US evice Options Pin Signal Vbus + GN SHELL Shield ottom View Pin Signal Frame GN TX () RX () Future Logic GN Link Status LE (Green) Pin Signal Pin Signal LE TX+ (/) TS () TX (/) RTS () Term. Resistor RX+ (/) do not use 0 RX (/) do not use Ethernet 0/00 ase-t PL ommunications, Programming/ownload Pin Signal T+ T R+ do not use Pin Signal do not use R do not use do not use Network ctivity LE (Orange) Note: See hapter : Specifications and hapter : PL ommunications for additional details on the available communication ports, protocols and cables. On Ethernet Linked No Ethernet omm. Note: evice is not available on ase Feature touch panels, part numbers E-SM-R and E-TL-R. Note: Use US Programming able, for example p/n US-L-. Off On Off ctive Network ata Network Idle E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

hapter : Getting Started Step Install the Programming Software and evelop a Project Following are the minimum system requirements for running -more Programming Software, p/n E-PGMSW, on a P: Personal

13 hapter : Getting Started Step Install the Programming Software and evelop a Project Following are the minimum system requirements for running -more Programming Software, p/n E-PGMSW, on a P: Personal omputer with a MHz or higher processor (PU) clock speed recommended; Intel Pentium/eleron family, or M K/thlon/uron family, or compatible processor recommended Keyboard and Mouse or compatible pointing device Super VG color video adapter and monitor with at least 00 x 00 pixels resolution (0 x pixels recommended) K color minimum 00 M free hard-disk space M free RM ( M recommended); M free RM ( G recommended) for Vista -ROM or V drive for installing software from the US port or Ethernet 0/00 Mbps port for project transfer from software to touch panel (Ethernet port not available on -R models) Operating System - Windows XP Home / Professional Edition Service Pack, Windows 000 with Service Pack or Vista ( bit) Insert the supplied -ROM into the P s -ROM drive and follow the instructions. If you need assistance during the software installation, please refer to the supplied Software Installation Guide or call the utomationirect Technical Support Start a Project Simulate Project Send Project to panel Make a New Project Select Project Location: Project: HMI Type: PL Protocol: :\My ocuments\-more Projects\ MyProject E-T irectlogic K-Sequence llows you to check the operation of your project before downloading it to the touch panel. rowse... Protocol Setup... Enter a name for your project Select the -more touch panel Select the PL river Or Read from isk ownload your project to the connected touch panel via US or Ethernet. Select an EZTouch Project that was previously saved under Version.a of the EZTouch Programming Software. 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

14 hapter : Getting Started 0 Step onnect Touch Panel to omputer onnect a US Programming able, such as p/n US-L-, from an US type port on the P to the US type programming port on the -more touch panel or connect the -more touch panel and P together via an Ethernet hub or switch, and T Ethernet cables (full feature panels only) or use an Ethernet crossover cable directly between the -more touch panel Ethernet port and the P Ethernet port (full feature panels only) P P Stride Ethernet Switch 0/00 ase-t (such as SE-SWU) Ethernet Port Ethernet via rossover able P Ethernet Port US US Port Type Ethernet T able - Straight-thru -more Touch Panel US-L- -more Touch Panel Ethernet T able - rossover US Port Type Programming/ownload -more Touch Panel (ottom View) (ottom View) Ethernet via Hub or Switch Ethernet Port Ethernet Port NOTE: On power up, the touch panel will either copy the project from its internal Flash memory to its internal SRM memory and run the project, or if a ompactflash memory card is plugged into the F slot, then any project contained on the F memory card will be copied to the panel s internal SRM memory and be run. The memory of a ompactflash card on F will override the panel s internal Flash memory on power up or reboot, even if the ompactflash memory card does not contain a project. E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

15 hapter : Getting Started Step Provide Power to the Touch Panel onnect a dedicated V (0. -. V) switching power supply rated at a minimum of. to the connector on the rear of the -more touch panel, include wiring the ground terminal to a proper equipment ground V, -%, +0% (0. -. V) GN Equipment Ground or install a -more / Power dapter, E-, to the rear of the touch panel and connect an voltage source of 00-0 V, 0/0Hertz, to its connector (see note below) then turn on the power source and check the LE status indicators on the rear of the -more touch panel for proper indication NOTE: The / Power dapter, E-, is for -more touch panels only. The adapter is powered from a 00-0 V, 0/0 Hertz power source. The adapter provides Power Fault features help protect data being logged to ompactflash during power failures. The -more panel must have firmware version. uild.e or higher for proper operation. Recommended Supply Fuse Panel Size Rating p/n 0. ML- &.0 ML + PU Status LE (Green, Orange & Red) Off Power Off Green Red linking Red linking Orange linking Green Wiring Normal PU Run State Memory Error Operating System not found L acklight Failure Power Loss etection TT Tightening Torque Power supply cable torque Power connector mounting torque Mounting flange screw torque PWR PU - oz-in ( Nm) - oz-in ( Nm) - oz-in ( Nm) NOTE: Use 0 / copper conductors only. TT 00-0 V 0/0 Hz -more LE Status Indicators Recommended Supply Fuse.0 time delay, p/n ML IOlOl PL Rear View PWR PU Tx Rx WRNING: The / Power dapter is not recommended for use with the E-T touch panel when operating temperatures are expected to exceed 0 [0 F]. Wiring Power dapter Not recommended for use with the E-T when operating temperatures are expected to be above 0 deg. Power LE (Green) On Power On Off Power Off Serial Tx/Rx LE (Green) On omm. is active Off No communication E-USER-M Hardware User Manual, nd Ed. Rev., 0/0 0

hapter : Getting Started 0 Step ccess the Touch Panel Setup Screens ccess the Main Menu of the touch panel System Setup Screens by pressing the extreme upper left corner of the panel display area for

16 hapter : Getting Started 0 Step ccess the Touch Panel Setup Screens ccess the Main Menu of the touch panel System Setup Screens by pressing the extreme upper left corner of the panel display area for three () seconds as shown below. djust the time and date for the panel by pressing the Setting button on the Main Menu, then press the djust lock button on the Setting screen. Use the right pointing arrows for the time or date display to select the unit to change. Use the up and down arrows to increment or decrement the value for the selected unit. Press OK when done to accept the changes to the time and date that is retained in the touch panel s battery backed memory, or press ancel to exit the djust lock setup screen without making any changes. Press the Main Menu button on the Setting screen and then the Exit button on the Main Menu screen to return to the application screen. Information Test Menu MIN MENU Setting Memory Exit djust lock djust Touch Panel Setting E-USER-M Hardware User Manual, nd Ed. Rev., 0/0 Time djust isplay eeper djust lock Main Menu OK ate 0 : : Note: When using an Ethernet connection, by default the panel is set for HP IP addressing. If it can not find a HP server, the panel will automatically assign an IP address. The IP address can be changed by the user from the programming software or by accessing the IP address setting screen as shown on page - and detailed on page -. See hapter - System Setup Screens for details on other setup screen settings and functions. ancel

17 hapter : Getting Started Step hoose Touch Panel to PL Protocol & ables PL ompatibility Table PL Family Model Protocols LIK all utomationirect Modbus (LIK) utomationirect irectlogi L0/L0 all H0-EOM/H0-EOM00 PL ompatibility Table continued on the next page. K-Sequence irect NET Modbus (Koyo addressing) irect LOGI Ethernet L0 all K-Sequence L0 L0 L0-0 K-Sequence -0-0/-0-/-0-0/-0-/-0 Using M H-EOM/H-EOM00-0/0P (Requires the use of a ata ommunications Unit) K-Sequence irect NET K-Sequence irect NET Modbus (Koyo addressing) irect NET Modbus (Koyo addressing) irect LOGI Ethernet irect NET -0 irect NET -0-0 M ll with M H-EOM/H-EOM00 H-WinPL (Think & o) Live V. or later and Studio any version H-WinPL (Think & o) Live V.. or later and Studio V.. or later K-Sequence irect NET Modbus (Koyo addressing) irect NET Modbus (Koyo addressing) K-Sequence irect NET K-Sequence irect NET K-Sequence irect NET Modbus (Koyo addressing) irect NET Modbus (Koyo addressing) irect LOGI Ethernet Think & o Modbus RTU (serial port) Think & o Modbus TP/IP (Ethernet port) 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

18 hapter : Getting Started 0 Step hoose Touch Panel to PL Protocol & ables (cont d) PL ompatibility Table (cont d) PL Family Model Protocols llen-radley MicroLogix 000, 00, 00, 00, 00, SL -0/0/0, PL MicroLogix 000, 00, 00, 00, 00 SL -0/0/0 ontrollogix, ompactlogix, FlexLogix PL- ontrollogix, ompactlogix, FlexLogix - Tag ased ontrollogix, ompactlogix, FlexLogix - Generic I/O Messaging ontrollogix, ompactlogix, FlexLogix - Tag ased MicroLogix 00, 00, SL /0, both via native Ethernet port MicroLogix 000, 00, 00, 00, 00, SL -0/0/0, all via ENI adapter Step hoose ables continued on next page. H/I/I+ F Half uplex; F Full uplex F Full uplex F Half uplex; F Full uplex EtherNet/IP Server EtherNet/IP lient Modbus TP/IP Modbus TP/IP devices Modbus TP/IP GE 0/0, 0/0. Micro 0, VersaMax Micro SNPX Mitsubishi Omron Modicon Siemens FX Series FX irect Q0, Q0H, Q0H, QH, QH Q PU Q, Qn Serial Qn Serial Q, Qna Ethernet Qn Ethernet 00 dapter, 00 J/S Serial J/S Ethernet PU, Quantum PU, EG Modicon Micro Series 0 PU: -xx, -xx, -xx, -xx S-00 PU, RS- Serial PPI Host Link FINS Modbus RTU S-00 PU, S-00 PU; Ethernet Ethernet ISO over TP E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

hapter : Getting Started Step hoose Touch Panel to PL Protocol & ables (cont d) NOTE : The above list of pre-made communications cables may be purchased.

NOTE : EZTouch serial PL communication cables are compatible with -more touch panels.

19 hapter : Getting Started Step hoose Touch Panel to PL Protocol & ables (cont d) NOTE : The above list of pre-made communications cables may be purchased. See hapter : PL ommunications for wiring diagrams of additonal user constructed cables. hapter also includes wiring diagrams for the pre-made cables. NOTE : EZTouch serial PL communication cables are compatible with -more touch panels. Pre-made cable examples Purchased able escription utomationirect LIK, irect LOGI PL RJ- port, L0, L0, L0, L0, -0, -0 & H-WINPL (RS-) irect LOGI (VG Style) -pin port L0, -0 (0-), -0 (RS-) irect LOGI PL RJ- port, -0 (RS-) irect LOGI L0 PL -pin -sub port, L0 (RS-) irect LOGI PL -pin -sub port, L0, -0, L0 U and all M s (RS-) E-L able Part Number E-L E-L- E-L E-L- E-L- llen-radley MicroLogix 000, 00, 00, 00, 00 (RS-) E-MLOGIX-L llen-radley SL -0/0/0, ontrollogix, ompactlogix, FlexLogix F port (RS-) llen-radley PL- F port (RS-) llen-radley MicroLogix, SL -0/0/0, PL H port (RS-) GE 0/0, 0/0, Micro 0, VersaMax Micro -pin -sub port (RS-) MITSUISHI FX Series -pin port (RS-) MITSUISHI FX Series -pin mini-in (RS-) OMRON Host Link (00 dapter, 00) (RS-) E-SL--L E-PL--L E-H-L E-0-0-L E-MITSU-L E-MITSU-L- E-OMRON-L E-L- 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

20 hapter : Getting Started 0 Step 0 onnect Touch Panel to PL onnect the serial communications cable between the -more touch panel and the PL or connect the -more touch panel and PL together via an Ethernet hub or switch, and T Ethernet cables (full feature panels only) or use an Ethernet crossover cable directly between the -more Ethernet port and the PL Ethernet port (full feature panels only) L0 PL Port L-0 PL Stride Ethernet Switch 0/00 ase-t (such as SE-SWU) H0-EOM/H0-EOM00 Ethernet Module L0 PL Serial -more to irect LOGI VG -pin port serial cable p/n E-L- Ethernet T able - Straight-thru -more Touch Panel Ethernet via Hub or Switch -more Touch Panel (ottom View) Ethernet via rossover able H0-EOM/H0-EOM00 Ethernet Module Ethernet T able - rossover -more Touch Panel (ottom View) Ethernet Port Ethernet Port 0 E-USER-M Hardware User Manual, nd Ed. Rev., 0/0

Chapter. Getting Started. In this Chapter...

Chapter. Getting Started. In this Chapter... Getting Started hapter In this hapter... Introduction... - onventions Used... - Mounting lips New Style... - Product Overview... - Part Number Key Touch Panels... - EZTouch onversion and Mounting... -