DIP Product Selection Guide

Transcription

1 DIP Product Selection Guide H DIP DIP Series TDP TD SD SD BD BP TDD SP RTE D RD Switch Type Half-pitch Half-pitch Low Low Standard Side umper Single Rotary 8 mm 0 mm Profile Profile Profile ctuated Switch In-line & oded oded oded Side Package Rotary Rotary actuated No. of -0 & , 0 & 6 0 & 6 Positions (even only) (even only) (except ) (except ) (except ) (except ) (even only) 0,6 ontact SPST SPST SPST SPST SPST SPST SPDT SPST oded oded oded Style Profile.73 (,).087 (,).89 (,80).68 (,7).97 (7,55).87 (7.3).090 (,3). (6,).67 (,5).68 (,7).7 (6,9) off PB Thru-hole Thru-hole Vertical Thru-hole Vertical Thru-hole Thru-hole Vertical.77 (,5).60 (,06).380 (9,65).77 (7,0).69 (,3).335 (8,5).30 (8,6). (0.5) SMT SMT Rt. ngle SMT Rt. ngle Rt. angle Rt. angle Rt. angle Process washable washable washable washable washable washable washable washable washable washable Sealed with tape with tape (tape not with tape (tape not (tape not with tape (tape not N (tape not (tape not seal seal required) seal required) required) seal required) required) required) Extended ctuator Flush ctuator Thru-hole Vertical Right ngle Surface Mount Tape & Reel (SMT only) Maximum 00m 00m 00m 00m 00m 00m 00m 0m 00m 0.V 0.V urrent Retention Feature Page No. H 3 H 6 H 9 H 3 H 6 H 8 H- H 3 H 5 option H-3 H-35 H Dimensions are shown: Inch (mm)

2 TDP Series Ultra-miniature Surface Mount Half-pitch Side-ctuated DIP Switches Features/Benefits World s first ultra-miniature SMT half-pitch side-actuated DIP Side actuation allows visual indication of on/off position in horizontal applications Process sealed for surface mount soldering and washable processing RoHS compliant Lead free Typical pplications Hand-held electronic devices Portable computer and electronic devices Instrumentation and controls H DIP Specifications SWITH FUNTION: SPST,, 6, 8, 0 positions. ONTT RTING: V D, 5 m (switching). 50 V D, 00 m (steady state). MEHNIL ND ELETRIL LIFE:,000 cycles. ONTT RESISTNE: 00 mω max. INSULTION RESISTNE: V D min. DIELETRI STRENGTH: 300 V min. STORGE TEMPERTURE: 0 to 85. OPERTING TEMPERTURE: 0 to 85. OPERTING FORE:,9N max. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). PKGING: Switches supplied in rigid dispensing tubes in full tube quantities only, this may affect order quantity. Tape and reel packaging also available. Materials SE & OVER: glass filled PPS (UL9V-0). TUTOR: P6T (UL9V-0). ONTTS: opper alloy with gold plate over nickel plate. TERMINLS: opper alloy, with gold over nickel plate. ll terminals are insert molded. TPE SEL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. ll switches supplied in OFF position. T D P S B Designation TDP Number of Positions ctuator H0 Flush ctuator H Extended ctuator Terminations S Gull wing ontact Material B Gold Terminal Seal Terminals are sealed Tape Seal (None) with tape D No tape Packaging (None) Tubes R Tape and Reel Note: Tape seal is not available with H Extended ctuators. H 3 Dimensions are shown: Inch (mm)

3 TDP Series Ultra-miniature Surface Mount Half-pitch Side-ctuated DIP Switches H DIP Flush ctuator-no Top Tape, Surface Mount Terminals 0.0/0.00 (0,3/0,) 0.03 (0,6) O N (,) DIM '' TYP. (,7) &K TDP X (,0) HMFER (,7) (7,6) (0,76) 0.50 (6,35) (8,89) DTE ODE 0.6 (,) 0.08 (0,5) DIM 'B' 0.36 (6,0) NO. DIM DIM QUNTITY PRT NUMBER POS. B PER TUBE TDP0H0SBD 0. (3,67) (,7) (0,5) TDP0H0SBD 0. (6,) 0.50 (3,8) 70 TDP06H0SBD (8,7) 0.50 (6,35) (0,57) 0.0 (,06) 0.8 (5,8) 0.30 (8,) 0 0 TDP08H0SBD 8 0. (,9) (8,89) 0 TDP0H0SBD (3,8) 0.50 (,3) 30 Schematic SPST Flush ctuator-with Top Tape, Surface Mount Terminals 0.0/0.00 (0,3/0,) TPE SEL O N 0.03 (0,6) MX. (,6) 0.6 (,) 0.07 (,) DIM '' TYP. (,7) &K TDP X (,0) HMFER 0.08 (0,5) DTE ODE (,7) (7,6) (0,76) DIM 'B' 0.50 (6,35) (8,89) TPE SEL 0.39 (6,06) 0.36 (6,0) NO. DIM DIM QUNTITY PRT NUMBER POS. B PER TUBE TDP0H0SB 0. (3,67) (,7) 5 TDP0H0SB 0. (6,) 0.50 (3,8) (0,5) TDP06H0SB (8,7) 0.50 (6,35) 50 TDP08H0SB 8 0. (,9) (8,89) (0,57) 0.0 (,06) 0.8 (5,8) 0.30 (8,) 0 0 TDP0H0SB (3,8) 0.50 (,3) 30 Schematic SPST H Dimensions are shown: Inch (mm)

4 TDP Series Ultra-miniature Surface Mount Half-pitch Side-ctuated DIP Switches Extended ctuator-no Top Tape, Surface Mount Terminals 0.0/0.00 (0,3/0,) 0.03 (0,6) O N (,) DIM '' &K TDP TYP. (,7) X (,0) HMFER DTE ODE (,7) (7,6) (0,76) 0.50 (6,35) (8,89) H DIP (,) NO. DIM DIM QUNTITY PRT NUMBER POS. B PER TUBE 0.08 (0,5) 0.36 (6,0) DIM 'B' TDP0HSBD 0. (3,67) (,7) (0,75) TDP0HSBD 0. (6,) 0.50 (3,8) 70 TDP06HSBD (8,7) 0.50 (6,35) (0,5) TDP08HSBD 8 0. (,9) (8,89) 0 TDP0HSBD (3,8) 0.50 (,3) 30 Schematic SPST 0.0 (0,57) 0.8 (5,8) 0.0 (,06) 0.30 (8,) 0 0 Tube Packaging (,) 0.30 (3,3) 0.30 (3,3) R 0.00 (R 0,5) (,0) 9.690±.039 (500,0±,0) 0.8 (6,3) 0.0 (5,) MODEL NUMBER QTY IN TUBE 0.3 (3,) 0.0 (,) Note: Switch shown has H extended actuator (0,5) R 0.03 (R,) TDP0 5 TDP0 70 TDP06 50 TDP08 0 TDP0 30 Tape and Reel Packaging MRKING LBEL EMBOSSED RRIER 0.57 (,00) 0.7 (,00) (,00) PIN # (,75) 0.9 (,86) REF 0.0 (0,30) DIRETION OF FEED DIM DIM. DIM PRT NUMBER W P PER REEL Ø0.059 (,50Ø) B &K TDP B 0.53 (,5) DIM. 'W' SEE HRT DIM. P SEE HRT (8,9) SETION B-B TDP (6,0) 0.75 (,5),000 TDP (6,0) 0.76 (7,0),000 TDP (6,0) (9,55), (8,9) NOTE: PRT NUMBER SHOWN:TDP08HSBDR FEED DIRETION SETION - TDP (,0) 0.76 (,),000 TDP (,0) (,65),000 H 5 Dimensions are shown: Inch (mm)

5 TD Series Ultra-miniature Surface Mount Half-pitch DIP Switches H DIP Features/Benefits Bifurcated contact for increased electrical reliability Process sealed for surface mount soldering and washable processing RoHS compliant Typical pplications Hand-held electronic devices Portable computer and electronic devices Instrumentation and controls Specifications SWITH FUNTION: SPST,,, 6, 8 & 0 positions. ONTT RTING: V D, 5 m (switching). 50 V D, 00 m (steady state). MEHNIL ND ELETRIL LIFE:,000 cycles. ONTT RESISTNE: 00 mω max. INSULTION RESISTNE: V D min. DIELETRI STRENGTH: 300 V min. STORGE TEMPERTURE: -0 to 85. OPERTING TEMPERTURE: -0 to 85. OPERTING FORE:,9N max. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). PKGING: Switches supplied in rigid dispensing tubes in full tube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Tape and reel packaging quantity varies with model. Materials SE & OVER: PPS (UL9V-0) TUTOR: LP (UL9V-0). ONTTS: opper alloy, with gold plate over nickel plate. TERMINLS: opper alloy, with gold flash over nickel plate. ll terminals are insert molded. TPE SEL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Note: ll switches supplied in OFF position. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. ll switches supplied in OFF position. T D H 0 B NEW Number of Positions TD0* TD0 TD0 TD06 TD08 TD0 Flush ctuator H0 Terminations S Gull wing * bend ontact material B Gold Sealed Packaging NONE Tubes R T/R * TD0H0BR is not available, TD0 only offered in tape & reel H 6 Dimensions are shown: mm

6 TD Series Ultra-miniature Surface Mount Half-pitch DIP Switches, DIM '',7,7 0,76 ON &K TD08 0,8 HMFER 7,6 6,35 8,89 H TD08H0SB 0,5 TYP.,7 DIP 0, TPE SEL, 6,,3 0,57,06 6,0 8, 0,5, DIM SEE HRT PRT NUMBER,7 TYP 0,76 TYP X 0,8 HMFER DTE ODE 5,37 3,77 6,97 DIM 'B' SEE HRT 0, TPE SEL 6, 0 ~5 0,5 TYP TD0H0B,,35 0,5 TYP,7 TYP TYP 6,35 TYP SEE DETIL Tube Package MRKING LBEL ON END OF TUBE ROHS NO. QUNTITY PRT NUMBER POS. DIM. DIM. B PER TUBE 500,0 REF 3,0 REF,0 REF,0 REF,0 TD0H0SB,0 N N TD0H0_B 3,67,7 5 TD0H0_B 6, 3,8 70 TD06H0_B 6 8,75 6,35 50 TD08H0_B 8,9 8,89 0 TD0H0_B 0 3,83,3 30 Schematic REEL DIMETER 330mm MRKING LBEL EMBOSSED RRIER REF, ON &K TD06 DIM 'W' SEE HRT SPST Tape & Reel Package ROHS NO. QUNTITY PRT NUMBER POS. DIM. W PER REEL DIRETION OF FEED 3,0,0 DIRETION OF FEED TD0H0SBR* 6,0 500 TD0H0_BR 6,0 000 TD0H0_BR 6,0 000 TD06H0_BR 6 6,0 000 TD08H0_BR 8,0 000 TD0H0_BR 0,0 000 * see next page for TD0 tape & reel drawing H 7 Dimensions are shown: mm

7 TD Series Ultra-miniature Surface Mount Half-pitch DIP Switches H TD0H0SBR DIP SEE DTEIL R0.3 MX O.0 0. TYP SEE DETIL "B' DETIL "B" H 8 Dimensions are shown: Inch (mm)

8 SD Series Low Profile DIP Switches Features/Benefits Low profile design saves space Thru-hole and surface mount models Tape and reel packaging available RoHS compliant Typical pplications ddress switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications H DIP Specifications ONTT RTING: 5 V D or 00 5 V D. MEHNIL ND ELETRIL LIFE:,000 cycles at rated loads. ONTT RESISTNE: 50 mω max. initial. INSULTION RESISTNE: 00 MΩ between terminals. DIELETRI WITHSTNDING VOLTGE: 300 V D min. for minute. STORGE TEMPERTURE: -0 to 85. OPERTING TEMPERTURE: -0 to 85. OPERTING FORE: 800 grams max. SOLDERBILITY: Dip and look solderability testing per &K spec. #8. Unplated edges of terminals permitted. PKGING: Switches supplied in rigid dispensing tubes in fulltube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Tape and reel packaging also available for surface mount options. Materials HOUSING: PPS, color black (UL9V-0). OVER: PPS, color black (UL9V-0). TUTOR: P6T (UL9-0) ONTTS: Gold plated Beryllium copper. TERMINLS: Gold plate over nickel plated brass. TPE SEL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. For Tin Lead options consult customer service center. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. ll switches supplied in OFF position.. S D H B Number of Positions SD0 SD0 SD03 SD0 SD05 SD06 SD07 SD08 SD09 SD0 SD ctuator H0 Flush H Extended Terminations Blank Thru-hole S Gull wing ontact material B Gold Sealed D None Blank Top tape seal Packaging NONE Tubes R T/R H 9 Dimensions are shown: Inch (mm)

9 SD Series Low Profile DIP Switches Flush ctuator No Tape, Thru-hole Terminals H ROHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE DIP SD08H0BD DIM '' TRVEL.05 (,30) (3,5) (,65).06 (,70) Ø.03 (0,8) TYP..00 TYP..95 (7,9) (,60).36.0 (8,03) (0,6).300 TYP. (7,6).00 (0,5) SD0H0BD.78 (,5) 00 SD0H0BD.78 (7,06) 60 SD03H0BD (9,60) 5 SD0H0BD.76 (,0) 35 SD05H0BD (,68) 30 SD06H0BD (7,8) 5 SD07H0BD (9,76) 0 SD08H0BD (,6) 0 SD09H0BD (,8) 5 SD0H0BD (7,3) 5 SDH0BD.79 (3,50) Schematic NOTE: SD 0 options are,5mm thick SPST Flush ctuator With Top Tape, Thru-hole Terminals SD08H0B.83 (,65) TRVEL DIM ''.05 (,30) PEELBLE TPE SEL Ø.03 TYP. (0,8).00 TYP..38 (3,5).06 (,70).95 (7,9) (,60).36.0 (8,03) (0,6).300 TYP. (7,6).00 (0,5) ROHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE SD0H0B.78 (,5) 00 SD0H0B.78 (7,06) 60 SD03H0B (9,60) 5 SD0H0B.76 (,0) 35 SD05H0B (,68) 30 SD06H0B (7,8) 5 SD07H0B (9,76) 0 SD08H0B (,6) 0 SD09H0B (,8) 5 SD0H0B (7,3) 5 SDH0B.79 (3,50) Schematic NOTE: SD 0 options are,5mm thick SPST Dimensions are shown: Inch (mm) H 0

10 SD Series Low Profile DIP Switches Flush ctuator With Top Tape, Surface Mount Terminals ROHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE SD0H0SB.78 (,5) 00 SD0H0SB.78 (7,06) 60 SD03H0SB (9,60) 5 SD0H0SB.76 (,0) 35 SD05H0SB (,68) 30 SD06H0SB (7,8) 5 SD07H0SB (9,76) 0 SD08H0SB (,6) 0 SD09H0SB (,8) 5 SD0H0SB (7,3) 5 SDH0SB.79 (3,50) Schematic.75 (,5) DIM '' (0,6) PEELBLE TPE SEL TRVEL.05 (,30).00.0 TYP. (6,0).059 MIN. (,50).95 (7,9).366 (9,30).00 TYP..09 MIN. (0,).03 (0,79) SD08H0SB H DIP SPST NOTE: SD 0 options are,5mm thick Flush ctuator No Tape, Surface Mount Terminals ROHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE SD0H0SBD.78 (,5) 00 SD0H0SBD.78 (7,06) 60 SD03H0SBD (9,60) 5 SD0H0SBD.76 (,0) 35 SD05H0SBD (,68) 30 SD06H0SBD (7,8) 5 SD07H0SBD (9,76) 0 SD08H0SBD (,6) 0 SD09H0SBD (,8) 5 SD0H0SBD (7,3) 5 SDH0SBD.79 (3,50) DIM '' (,5) TRVEL.05 (,30).0 TYP. (6,0).059 MIN. (,50).38 (3,5).95 (7,9).00 TYP..09 MIN. (0,) SD08H0SBD Schematic SPST.0 (0,6) (9,30) NOTE: SD 0 options are,5mm thick.03 (0,79) Extended ctuator No Top Tape, Thru-hole Terminals ROHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE SD08HBD.83 (,65) DIM '' (,) TRVEL.05 (,30).38 (3,5) Ø.03TYP. (0,8).00 TYP..039 (,0) (,60).36.0 (8,03) (0,6) NOTE: SD 0 options are,5mm thick.300 (7,6) TYP..039 (,0).95 (7,9).00 (0,5) SD0HBD.78 (,5) 00 SD0HBD.78 (7,06) 60 SD03HBD (9,60) 5 SD0HBD.76 (,0) 35 SD05HBD (,68) 30 SD06HBD (7,8) 5 SD07HBD (9,76) 0 SD08HBD (,6) 0 SD09HBD (,8) 5 SD0HBD (7,3) 5 SDHBD.79 (3,50) Schematic SPST H Dimensions are shown: Inch (mm)

11 SD Series Low Profile DIP Switches Extended ctuator No Top Tape, Surface Mount Terminals ROHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE H DIP SD08HSBD.75 (,5) DIM '' TYP. (6,0) TRVEL.05 (,30).059 MIN. (,50).00 TYP..05 (,30) (,0) (7,9) (3,5).09 MIN. (0,) SD0HSBD.78 (,5) 00 SD0HSBD.78 (7,06) 60 SD03HSBD (9,60) 5 SD0HSBD.76 (,0) 35 SD05HSBD (,68) 30 SD06HSBD (7,8) 5 SD07HSBD (9,76) 0 SD08HSBD (,6) 0 SD09HSBD (,8) 5 SD0HSBD (7,3) 5 SDHSBD.79 (3,50).0 TYP. (0,6) (9,30).03 (0,79) Schematic NOTE: SD 0 options are,5mm thick SPST Tape & Reel Packaging Surface Mount Options only MODEL NO. 'S' OPTION DIM. 'H' (REF.) DIM. 'W' DIM. 'W' DIM. 'B' (REF.) (REF.) (REF.) DIM. '' (REF.) DIM. 'D' (REF.) QUNTITY PER REEL SD0 H N/ H SD0 H N/ H SD03 H N/ H SD0 H N/ H SD05 H N/ H SD06 H H SD07 H H NOT URRENTLY VILBLE IN TPE ND REEL SD08 H H SD09 H H SD0 H H SD H H NOT URRENTLY VILBLE IN TPE ND REEL B SD0HSBDR OPTION SHOWN 8 TYP SETION B-B TYP B "H" TYP "" DIRETION OF FEED 3 MX "W" 3 MX 0.±0.05 "B" SETION - 'W' 3 TYP 3-5 OPTION SD0 SHOWN 'W' '' TYP TYP.5 TYP.75 3 MX 0. 'B' SLE DETIL ::.5 TYP DIRETION OF FEED SETION B-B OPTION SD08 SHOWN 3 MX 0. '' SEE DETIL REEL LYOUT SLE :: 'W' 'D' 'B' 0 6 SETION - 3 MX 'H' DIRETION OF FEED SETION B-B H Dimensions are shown: Inch (mm)

12 SD Series Low Profile DIP Switches Features/Benefits Low profile design saves space Thru-hole and surface mount models Tape and reel packaging available Sealed with top tape RoHS compliant Typical pplications ddress switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications H DIP Specifications SWITH FUNTION: SPST -, 3,, 5, 6, 7, 8, 9, 0 & positions ONTT RTING: arry: V D max. Switch: 0. 5 V D min to 00 5 V D max. MEHNIL ND ELETRIL LIFE:,000 make-and-break cycles at full load, each circuit. ONTT RESISTNE: Below 50 milliohms typ. - V D, 00m. INSULTION RESISTNE: 0 9 ohms min. DIELETRI STRENGTH: 500 V RMS sea level between adjacent terminals. STORGE TEMPERTURE: -0 to 85. OPERTING TEMPERTURE: -0 to 85. OPERTING FORE: g inital. PKGING: Thru-hole switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Surface mount switches available in tape and reel packaging by added R to end of part number;,000 pieces per reel. Switch position denotes pin number. ll switch actuators in OFF position, standard. Materials SE & OVER: (PP), flame retardant (UL 9V-0) TUTOR: Nylon, flame retardant (UL 9V-0) ONTTS: Beu with gold plate. TERMINLS: Bright tin-plated brass. TERMINL SEL: ll terminals insert molded. TPE SEL: Polyimide. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. S D Number of Positions SD0 SD07 SD03 SD08 SD0 SD09 SD05 SD0 SD06 SD ctuator H0 Flush ctuator OFF position H Extended ctuator OFF position H Flush ctuator ON position H3 Extended ctuator ON position Terminations S Gull wing (None) P ThruHole ontact Material B Gold 0µ IN B Gold 30µ IN * Packaging (None) Tubes R Tape and Reel Process Seal (None) Tape seal D No tape seal * onsult factory for availability H 3 Dimensions are shown: Inch (mm)

13 SD Series Low Profile DIP Switches H DIP Sealed Flush ctuator With Top Tape, Thru-hole Terminals Process sealed - withstands soldering and cleaning processes.63 (6,68) ON DIM. '' SEE HRT ORIENTTION MRK PEELBLE TPE SEL.07 (0,70) TUTOR TRVEL. (3,6).68 TYP. (,7) Ø.038 (0,97) TYP..00 TYP..35 TYP. (8,00).300 TYP. (7,6) ROHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE SD0H0B.58 (6,55) 85 SD03H0B (9,09) 60 SD0H0B.58 (,63) 5 SD05H0B (,7) 0 SD06H0B (6,7) 30 SD07H0B (9,5) 5 SD08H0B (,79) 5 SD09H0B (,33) 0 SD0H0B (6,87) 0 SDH0B.58 (3,95) 5 Schematic.03 TYP. (0,60) STNDOFF.059 TYP. (,50).0 TYP. (0,55).6 TYP. (3,0).00 TYP..00 TYP. (0,5).35 TYP. (8,5) SPST Table applicable to H0 and H actuator options. Sealed Flush ctuator With Top Tape, Surface Mount Terminals.63 (6,68) ON DIM. '' SEE HRT ORIENTTION MRK PEELBLE TPE SEL.07 (0,70) TUTOR TRVEL.60 (,06) WITH TPE. (3,6).3 TYP. (6,7).0 MIN. (,).35 TYP. (8,00).00 TYP..35 MIN. (,05) RoHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE SD0H0SB.58 (6,55) 85 SD03H0SB (9,09) 60 SD0H0SB.58 (,63) 5 SD05H0SB (,7) 0 SD06H0SB (6,7) 30 SD07H0SB (9,5) 5 SD08H0SB (,79) 5 SD09H0SB (,33) 0 SD0H0SB (6,87) 0 SDH0SB.58 (3,95) 5.00 TYP. (0,5) STNDOFF.0 TYP. (0,55).00 TYP..00 TYP. (0,5).300 (7,6).390 (9,9) Schematic SPST Table applicable to H0 and H actuator options. Sealed Extended ctuator With Top Tape, Thru-hole Terminals.63 (6,68).00 TYP. (0,5) ON DIM. '' SEE HRT ORIENTTION MRK PEELBLE TPE SEL.07 (0,70) TUTOR TRVEL. (3,6).68 TYP. (,30) Ø.038 (0,97) TYP..00 TYP..35 TYP. (8,00).300 TYP. (7,6) RoHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE SD0HB.58 (6,55) 85 SD03HB (9,09) 60 SD0HB.58 (,63) 5 SD05HB (,7) 0 SD06HB (6,7) 30 SD07HB (9,5) 5 SD08HB (,79) 5 SD09HB (,33) 0 SD0HB (6,87) 0 SDHB.58 (3,95) 5.03 TYP. (0,60) STNDOFF.059 TYP. (,50).0 TYP. (0,55).6 TYP. (3,0).00 TYP..00 TYP. (0,5).35 TYP. (8,5) Schematic SPST Table applicable to H and H3 actuator options. Dimensions are shown: Inch (mm) H

14 Sealed Extended ctuator With Top Tape, Surface Mount Terminals SD Series Low Profile DIP Switches RoHS NO. QUNTITY PRT NUMBER POS. DIM. PER TUBE SD0HSB.58 (6,55) 85 SD03HSB (9,09) 60 SD0HSB.58 (,63) 5 SD05HSB (,7) 0 SD06HSB (6,7) 30 SD07HSB (9,5 5 SD08HSB (,79) 5 SD09HSB (,33) 0 SD0HSB (6,87) 0 SDHSB.58 (3,95) 5.63 (6,68).00 TYP. (0,5) ON DIM. '' SEE HRT ORIENTTION MRK PEELBLE TPE SEL.07 (0,70) TUTOR TRVEL.70 (,3) WITH TPE. (3,6).3 TYP. (6,7).0 MIN. (,).35 TYP. (8,00).00 TYP..35 MIN. (,05) H DIP Schematic SPST.00 TYP. (0,5) STNDOFF.0 TYP. (0,55).00 TYP..00 TYP. (0,5).300 (7,6).390 (9,9) Table applicable to H and H3 actuator options. TPE & REEL PKGING SURFE MOUNT OPTIONS ONLY RoHS NO. QUNTITY PRT NUMBER POS. DIM. PER REEL.079 (,00) DIM P SEE HRT SD0H0SBR.58 (6,55) 000 SD03H0SBR (9,09) 000 SD0H0SBR.58 (,63) 000 SD05H0SBR (,7) 000 SD06H0SBR (6,7) 000 SD07H0SBR (9,5 000 SD08H0SBR (,79) 000 SD09H0SBR (,33) 000 SD0H0SBR (6,87) 000 SDH0SBR.58 (3,95) 000 DIM B SEE HRT.057 (,00).06 DI (,55).069 (,75) DIM SEE HRT DIM G SEE HRT DIM D SEE HRT Schematic SPST Table applicable to H0 and H actuator options. DIM SEE HRT ELONGTED HOLES ON SD07-SD ONLY FEED DIRETION SWITH NO. SD0 SD03 SD0 SD05 SD06 SD07 SD08 SD09 SD0 SD DIM POKET BOTTOM.3(0,5).06(0,3).9(0,9).06(0,3).06(0,3).06(0,3).06(0,3).06(0,3).06(0,3).06(0,3) DIM B POKET BOTTOM.35(8,0).06(0,3).76(,).60(5,3).70(7,8).803(0,).85(,7).08(6,).055(6,8).303(33,) DIM TPE WIDTH.630(6,0).630(6,0).95(,0).95(,0).95(,0).60(3,0).73(,0).73(,0).73(,0).73(,0) DIM D POKET DEPTH.77(,5).77(,5).77(,5).77(,5).77(,5).77(,5).77(,5).77(,5).77(,5).77(,5) DIM G SPROKET HOLE SPING N/ N/ N/ N/ N/.8(8,).59(0,).59(0,).59(0,).59(0,) DIM P PITH BETWEEN POKETS.7(,0).7(,0).7(,0).7(,0).7(,0).7(,0).7(,0).7(,0).7(,0).7(,0) Reel Information Outside diameter 3.00 (333,0) Pilot hole.5 (3,0) H 5 Dimensions are shown: Inch (mm)

15 BD Series Standard Profile DIP Switches H DIP Features/Benefits Traditional full profile DIP switch Extended actuator for easy actuation Open bottom construction allows for solder washing without the need for tape seal RoHS compliant Typical pplications ddress switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications Specifications SWITH FUNTION: SPST - thru position available (except position). ONTT RTING: arry: 00 m 50 V D. Switch: 00 m 5 V D or 5 m 5 V D. MEHNIL ND ELETRIL LIFE: 0,000 make-and-break cycles at full load, each circuit. ONTT RESISTNE: Below 50 milliohms typ. - V D 00m. INSULTION RESISTNE: 0 9 ohms min. DIELETRI STRENGTH: 500 V RMS sea level between adjacent terminals. PITNE: 5pF max. between adjacent terminals. STORGE & OPERTING TEMPERTURE: -0 to 85. SHOK: Withstands 0g ms sawtooth waveform with no contact opening greater than 0 microseconds. VIBRTION: No contact opening greater than 0 microseconds and no contact closure when exposed to vibration.06 in D or 5g, whichever is less, from 0 to 55 Hz, and 0g from 55 to 500 Hz. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). PKGING: Switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Number of switches per tube varies with model. Switch position denotes pin number. ll switch actuators in OFF position, standard. Materials SE & OVER: Glass filled polyester (PBT), flame retardant (UL 9V-0). TUTOR: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 9V-0) ONTTS: Gold over nickel over phosphor bronze. TERMINLS: Matte-tin over nickel over phosphor bronze. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Vertical Full Profile DIP QUNTITY PRT NUMBER NO.POS. DIM. DIM. B PER TUBE BD (0,77) DIM '' ON.380 (9,65) TYP. (,5).60 TYP. (,06).06 (,58) MX TUTOR TRVEL.65 (6,73).97 (7,55).03 (0,8) TYP. Ø.038 TYP. (0,97).00 TYP. DIM 'B'.080 TYP. (,03) BD0.80 (,57) N 5 BD0.80 (7,).00 7 BD (9,65).00 (5,08) 5 BD0.80 (,9).300 (7,6) 3 BD (,73).00 (0,6) 35 BD (7,7).500 (,75) 30 BD (9,8).600 (5,) 6 BD (,35).700 (7,78) 3 BD (,89).800 (0,3) BD (7,3).900 (,.86) 9 BD.80 (3,5).00 (7,9) 6 Schematic.089 (,6).00 TYP..00 TYP. (0,5). TYP. (3,58).006 (0,6).97 (7,55) SPST H 6 Dimensions are shown: Inch (mm)

16 BD Series Standard Profile DIP Switches Open Base and V Right ngle Terminal Style QUNTITY PRT NUMBER NO.POS. DIM. PER TUBE BD0V.80 (7,) 7 BD03V (9,65) 5 BD0V.80 (,9) BD05V (,73) 35 BD06V (7,7) 9 BD07V (9,8) 6 BD08V (,35) 3 BD09V (,89) 0 BD0V (7,3) 8 BDV.80 (3,5) (0,77).380 (9,65) ON (,7) 3 DIM TYP. (,55) (,6) 0.97 (7,55).080 (,03).5 (3,8).03 (0,8) TYP. BD08V H DIP Schematic SPST.00 TYP. (0,5).00 TYP (0,6).30 (8,).00 (0,5) TYP..06 DI TYP. (,7ø) Installation, Soldering and leaning ll BD Series Standard Profile DIP Switches can be hand soldered or machine soldered without the use of boot, caps, tapes or special attention. Open base washable models have unique design, allowing solvent cleaners and water/detergent solutions to flush and clean the electrical contacts of the contaminants and fluxes. For best results, follow these directions: ) Wave soldering recommended at 500 F (60º) solder temperature. ) Hand solder using 30 watt small tip iron controlled at 500 F (60º), 0 seconds max./terminal. 3) Open base washable models: lean flux using forced rinse, high agitation or triple bath cleaning method. DO NOT mask or cover switch in any way during cleaning. Switch is designed for easy solvent flush out. ) ll switch actuators must be in OFF position during soldering and cleaning processes. Dimensions are shown: Inch (mm) H 7

17 BP Series Side ctuated DIP Switches H DIP Features/Benefits Side actuated contacts vailable in thru-hole or SMT models High pressure contact system does not require tape seal for washing RoHS compliant & compatible Typical pplications ddress switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications Specifications SWITH FUNTION: thru 0 and position available. ONTT RTING: 00 m 5 V D or 5 m V D. MEHNIL ND ELETRIL LIFE:,000 cycles 5 V D 0m. ONTT RESISTNE: 50 milliohms initial max. INSULTION RESISTNE: 00 V D 00 megohms min. DIELETRI WITHSTND VOLTGE: 300 V for minute. STORGE TEMPERTURE: -0 to 85. OPERTING TEMPERTURE: -0 to 85. OPERTING FORE: 800 grams max. SOLDERBILITY: Flow solderable and washable (soldering: 60 for 0 sec. max.) PKGING: Switches supplied in rigid dispensing tubes in fulltube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Tape and reel packaging available for SMT options. Materials HOUSING: PPS, color black (UL9V-0). OVER: PPS, color black (UL9V-0). TUTOR: P-6T UL9V-0). ONTTS: Beryllium opper with Gold over Nickel plate. TERMINLS: Brass, Gold over Nickel plate. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. ll switches supplied in OFF position. B P B Model BP0 position BP0 positions BP03 3 positions BP0 positions BP05 5 positions BP06 6 positions BP07 7 positions BP08 8 positions BP09 9 positions BP0 0 positions BP positions On Position NONE Down R Up Terminations NONE P S Gull wing ontact material B Beu, Gold over nickel plate Packaging NONE Tube R Tape and Reel (Surface Mount only) Dimensions are shown: Inch (mm) H 8

18 BP Series Side ctuated DIP Switches Side ctuator Thru-hole Terminals ROHS NO. QUNTITY PRT NUMBER POS. DIM. DIM. B PER TUBE BP0B.76 (,8) N/ 00 BP0B.76 (7,0) BP03B (9,6).00 (5,08) 5 BP0B.76 (,).300 (7,6) 35 BP05B (,6).00 (0,6) 30 BP06B (7,).500 (,70)) 5 BP07B (9,7).600 (5,) 0 BP08B (,3).700 (7,78) 0 BP09B (,8).800 (0,3) 5 BP0B (7,3).900 (,86) 5 BPB.80 (3,5).00 (7,9) (,) &K BP08 5B (7,6) B BP08B H DIP Schematic B ø (0,8+0,/-0) SPST NOTE: Reverse throw available, contact &K for P/N and quote (6,0) (,3) 0.00 PITH ON (8,5) 0.73 (,) (,) (0,75) (,0) 0.57 (,0) 0.06 (,7) (,6+0/-0,) (0,6+0/-0,) 0.99/0.33 (7,6/8,7) 0.00 (0,5) Side ctuator Surface Mount Terminals ROHS NO. QUNTITY PRT NUMBER POS. DIM. DIM. B PER TUBE BP0SB.76 (,8) N/ 00 BP0SB.76 (7,0) BP03SB (9,6).00 (5,08) 5 BP0SB.76 (,).300 (7,6) 35 BP05SB (,6).00 (0,6) 30 BP06SB (7,).500 (,70)) 5 BP07SB (9,7).600 (5,) 0 BP08SB (,3).700 (7,78) 0 BP09SB (,8).800 (0,3) 5 BP0SB (7,3).900 (,86) 5 BPSB.80 (3,5).00 (7,9) Schematic &K BP08 5B BP08SB "B" SEE HRT SPST NOTE: Tape and reel packaging available by adding R to end of project number (6,0) (,) 0.033/0.0 (0,85/,0) B 0.00 PITH ON (,6+0/-0,) 0.0 (0,6+0/-0,).5 TYP.5 MIN TYP P.. MOUNTING 0.00 (0,5) 0.03 (0,8) 0.3 (8,5) 0.73 (,) (9,3) (,) 0.09 (0,75) (0,8) (,0) Dimensions are shown: Inch (mm) H 9

19 BP Series Side ctuated DIP Switches Tape & Reel Packaging Surface Mount Options Only H DIP QTY/ REEL POLES DIM. DIM. B DIM. DIM. D DIM. E.53 (,5).95 (,0).530 (3,5).960 (,).53 (,5).95 (,0).3 (7,9).960 (,) 3.53 (,5).95 (,0).09 (0,).960 (,).53 (,5).95 (,0).508 (,9).960 (,) 5.53 (,5).95 (,0).606 (5,).960 (,) (,).8 (8,).60 (3,0).709 (8,0).75 (3,) (,).8 (8,).60 (3,0).807 (0,5).75 (3,) (0,).590 (0,).73 (,0).89 (,7).78 (,) (0,).590 (0,).73 (,0).00 (5,5).78 (,) (0,).590 (0,).73 (,0).06 (8,).78 (,).795 (0,).590 (0,).73 (,0).3 (33,3).78 (,) Position DIM '' (,00) FEED DIRETION BP (,0) DIM '' Ø (Ø,50) (,75) DIM 'D' 3 0 MX Note: For tape and reel packaging, add R to end of part number (6) 0.09 (5,3) (,5) (,00) 0 0 3x 0 0 DIM. 'E' x.079 (P-7P) ( x.0) x.8 (8P-0P) ( x 3.0) 0.35 (8,0) 3 0 MX ø.87 ø(,0), 3, & 5 Positions 3.0 (330) (00,0) FEED DIRETION 0.76 ±.008 (7,0 ± 0,) ø.5 ø(3,0) Tube Packaging (,0) 0.07 (,8) 0.00 (0,5) 0.5 (3,0) 0.97 (5,0) 0.33 (,0) ø7.8 ø(90,0) MRKING LBEL ON END OF TUBE 9.68 ± 0.0 (500,0 ±,0) 0.77 (,5) 0.56 (6,5) 0.00 MX. (0,5) TYP REF. (,0) 0.5 (3,0).079 (,00).079 (,00).630 (6,0).57 (,00) 6, 7, 8, 9, 0 & Positions.57 (,00) Ø.059 (,50).50 (,5) Ø.0 (0,30) MX. Ø.059 (,50) FEED DIRETION.069 (,75) 3 0 MX. DIM. '' DIM 'D' DIM. '' 3 0 MX..35 (8,00).069 (,75) 0.00 (0,5) 3 0 MX. DIM. '' DIM. '' DIM 'D' DIM. 'B' Ø.0 (0,30) MX. Ø.0 (0,30) MX. SEE DETIL.630 (6,0).50 (,5) 3 0 MX (0,5).35 (8,00) H 0 Dimensions are shown: Inch (mm)

20 TDD Series umper Switch Features/Benefits Bifurcated contact for increased electrical reliability Process sealed for surface mount soldering and washable processing RoHS compliant Typical pplications Hand-held electronic devices Portable computer and electronic devices Instrumentation and controls Inverters H DIP Specifications ONTT RTING: 5 V D (switching) or V D (steady state). MEHNIL ND ELETRIL LIFE: 00 cycles at rated loads. ONTT RESISTNE: 00 mω max. V D /0 m INSULTION RESISTNE: V D min. DIELETRI STRENGTH: 300 V /minute STORGE TEMPERTURE: -0 to 85. OPERTING TEMPERTURE: -30 to 85. OPERTING FORE:.9 N max. SOLDERBILITY: Per MIL-STD-0F method 08D, or EI RS-86E method 9 ( hour steam aging). PKGING:,000 pieces tape & reel Materials SE ND OVER: PPS, color black (UL9V-0). TUTOR: LP (UL9-0) ONTTS: opper alloy with gold plate over nickel plate TERMINLS (INSERT MOLDED): opper alloy gold flash over nickel plate TPE SEL: Polyamide Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. For Tin Lead options consult customer service center. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. ll switches supplied in OFF position.. T D D 0 H 0 S B R Series ctuator H0 Flush Terminations S Gull wing ontact material B Gold Sealed Top tape seal Packaging R T/R Dimensions are shown: Inch (mm) H

21 TDD Series umper Switch H 3,5 (), () 3X 0,6 6±0,5 5,,6 3,5 3X () DIP () X 0, PB LYOUT 5,8±0,5 0,55 STROKE 0,55 STROKE ±0, 3X,3 () () SHEMTI SPDT,±0, 3X 0,5 (,3) 3X 0,,±0,5 0,30 0,05 6±0,3 SETION - DIRETION OF FEED,5,75 0,35 THK 7,5 6 R0,3 B B 3 DRFT 8 TYP SEE DETIL SETION - 3 DRFT R0,3 MX 6,5 SETION B-B,65 3 6,5 DETIL "B"., 3, REF, 5 DETIL SLE 6:,5 DETIL B 6. X REEL NOT TO SLE H Dimensions are shown: Inch (mm)

22 SP Series Single In-line Package Switches Features/Benefits Thin Single In-line Packaging saves PB space Retention feature holds part to PB prior to soldering vailable in vertical or right angle models High pressure contact system does not require tape sealing RoHS compliant Typical pplications ddress switch for industrial controls Logic switching for computers and peripherals Function controlling for numerous applications H DIP Specifications ONTT RTING: arry: 0 5VD Switching: 0. 0.m VD min. MEHNIL ND ELETRIL LIFE:,000 cycles min. ONTT RESISTNE: 50 mω 0 V D 0m. INSULTION RESISTNE: 00 MΩ 00 V D. DIELETRI STRENGTH: 300 V. PITNE: 5pF max. between adjacent terminals. OPERTING TEMPERTURE: -30 to 60. STORGE TEMPERTURE: -30 to 80. OPERTING FORE: 5.9N max. SOLDERBILITY: Dip & look solderability testing per &K spec. #8. Unplated edges of terminals permitted. PKGING: Switches supplied in rigid dispensing tubes in fulltube quantities only, this may affect order quantity. Numbers of switches per tube varies with model. Materials BSE: PPS (UL9V-0). OVER: PBT (UL9V-0). TUTOR: /6 Nylon (UL 9V-0). MOVBLE ONTT: Beryllium copper alloy, gold over nickel plate. FIXED ONTT: opper alloy, gold over nickel plate. LIP: Phosphor bronze wire. Phosphor bronze, Tin over nickel plate. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. ll switches supplied in OFF position. S P B Number of Positions SP0 positions SP0 positions SP06 6 positions SP08 8 positions SP0 0 positions Terminations NONE Vertical Right ngle ontact material B Gold Dimensions are shown: Inch (mm) H 3

23 SP Series Single In-line Package Switches Vertical H DIP SP08B.6 (3,).08 (0,7).070 (,79). (6,).00 DIM ''.00 DIM 'B'.00 (0,50).0 (0,30). (3,6) ROHS PRT NO. QUNITY NUMBER POS. DIM. DIM. B PER TUBE SP0B.3 (8,68).00 (5,08) 50 SP0B.5 (3,76).00 (0,6) 30 SP06B 6.7 (8,8).600 (5,) 5 SP08B 8.9 (3,9).800 (0,3) 0 SP0B 0. (9,00).000 (5,0) 5 Schematic DIM 'B'.039 (0,99) (0,5) (0,7).00 Ø.03 TYP. (0,8) SPST (,).035 (0,9) DIM ''.5 (3,).063 (,6) SP08B.00 (0,5) Ø.06 (0.).00 (5,08).36/.5 (6,0/6,).68 (6,8).083 (,).098 (,5). (6,) DIM 'B' DIM ''.00 RD. (0,5).065 (,65).8 (,6).030 (0,75) DIM 'B' DIM 'B'.00 (5,08).00 Ø.03 TYP. (0,8) ROHS PRT # SP0B SP0B SP06B SP08B SP0B NO. QTY PER POS. DIM. DIM. B DIM. TUBE.3 (8,68).00 (5,08).339 (8,6) 50.5 (3,76).00 (0,6).50 (3,7) (8,8).600 (5,).736 (8,7) (3,9).800 (0,3).937 (3,8) 0 0. (9,00).000 (5,0).38 (8,9) 5 Schematic SPST H Dimensions are shown: Inch (mm)

24 RTE Series Low Profile Rotary DIP Switches Features/Benefits Thru-hole and surface mount models Miniature size with robust metal cover in black or silver nickel finish, 0, & 6 positions Large choice of codings Vertical or reverse versions RoHS compliant Typical pplications Timers, automation components omputer and peripherals larms, access control, smoke detectors Instrumentation H DIP Specifications ONTT RTING: Gold: 00 m max. 0µ min. 30 V D max. 0 mvd min. MEHNIL LIFE: 0,000 actuations ONTT RESISTNE: 00 mω max. initial; 50 mω after life INSULTION RESISTNE: 0 0 Ω min. initial DIELETRI STRENGTH: 300 Vrms mn OPERTING TEMPERTURE: -5 to 85. STORGE TEMPERTURE: -0 to 85. PKGING: N or R terminations in tube. V termination in box. G termination in reel, 750 pieces per reel. G termination with flush actuator, 50 pieces per reel. Materials OVER: Brass, nickel plated (black or silver) BSE: PPS TUTOR: LP MOVBLE ONTTS: Bronze, gold plated. STTIONRY ONTTS: Brass, gold plated. TERMINLS: See page I-8 to I-9 O-RING: Silicone Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Solderability: Wave soldering 60º/0 s. SMT are reflow compatible according to &K lead free specification for SMT components PS-LF-00. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. NOTE: Some of the configurations may not be available or could require some development. Number of Positions R T E RTE0 RTE0 3 RTE6 3 ESD Protection and top plate 0 Without ESD - standard plate With ESD - standard plate B Without ESD - black plate ctuator 0 Flush, screwdriver slot Extended shaft, 5, 5, 6 Shaft for button - RTE0 version only available with screwdriver slot acuator "0" 3 - Single pole function not available for RTE0/RTE6 - ESD protection available with N thru-hole termination only 5 - Not available in surface mount 6 - Buttons ordered separately 8 - Manual - available for RTE0/RTE6 with actuator option only 9 - BD complement code for RTE0, not available with terminations G & M 0 - Grey ode - for RTE0 only - Hexidecimal code for RTE6 only - Grey code for RTE6 only Terminations N Thru-hole V Right angle G Surface mount M Manual 8 R Reverse, thru-hole Switch Function 0 Single pole 3 BD code BD complement code 9 3 Grey ode 0 Hexadecimal code 7 Grey ode ontact/terminal Material Gold/ lead free tin H 5 Dimensions are shown: Inch (mm)

25 RTE Series Low Profile Rotary DIP Switches SWITHES WITH STNDRD OPTIONS H P Mount-Terminal Option N PRT NUMBER NO. QTY WITHOUT ESD PIN WITH ESD PIN POS. FUNTION PER TUBE DIP RTE000N0 RTE00N0 SPT 65 RTE000N RTE00N 0 BD 65 RTE600N RTE60N 6 HEXDEIML 65 Right ngle Mount-Terminal Option V NO. PRT NUMBER POS. FUNTION QUNTITY RTE000V0 SPT 50 per box RTE000V 0 BD 50 per box RTE600V 6 HEXDEIML 50 per box Surface Mount-Terminal Option G NO. QUNTITY PRT NUMBER POS. FUNTION PER REEL RTE000G0 0 SPT 50 RTE000G 0 BD 50 RTE600G 6 HEXDEIML 50 NUMBER OF POSITIONS RTE0 POSITION RTE0 0 POSITION RTE6 6 POSITION ' 30' 8 8 H 6 Dimensions are shown: Inch (mm)

26 ESD PROTETION RTE Series Low Profile Rotary DIP Switches 0 WITHOUT WITH.9 (7,) H. (3,65).95 (7,5).67 (,5) DIP (9,60) (7,6).035 TYP. (ø0,9) TYP. (ø0,9).0 m 8.0 TUTOR 0 FLUSH, SREWDRIVER SLOT,05 +0, 0,95 +0, 0 0,5+0, 0 EXTENDED SHFT (not available in surface mount) SHFT FOR BUTTON 3, ± 0,05, +0,05 0 Ø, ± 0,03 (3x) 0 90 R0,,5 3, ±0,05 +0, 0,5 0 90,55 ± 0,05 R0,, ± 0,05 0,5-0,0 0,6 ± 0,05 ± 0,03, ±0,05, -0, 0 Ø 3-0,0 0 Ø ±0,05 GE,05 +0, 0,5 7,5 0 Ø3,95-0,05 3,9 0-0, R0,09 Ø,6 +0,03 0 Ø,8 +0,05 0 6, 0-0,05 R0,5 0-0,05 H 7 Dimensions are shown: Inch (mm)

27 RTE Series Low Profile Rotary DIP Switches TERMINTIONS N THRU-HOLE H DIP. (3,65).35 (8).83 (7,).9 (7,).67 (,5) With ground terminal Without ground terminal (7,5) (7,6) (7,6).378 (9,60).0.0 Ø.0 (,05) m (0,9) (0,9) R REVERSE, THRU-HOLE.6±.008 (3,±0.).85±.006 (,7±0.5).9 (7,).0 (,05).00 (0.5).63 ±.008 (,5 ± 0,). (3,65).5±.008 (,5±0,).83 (7,).366 (9,3).00 (0,5).309 (7.85) 0. Ø 0.67 (,5) With ground terminal m (0,6) (0,9) Without ground terminal (0,6) (0,9) V RIGHT NGLE, THRU-HOLE G SURFE MOUNT.335 (8,5). 5º0' (3,65).8 (3,75).57 ().35 (8,0).7 (5,5).83 (7,).77 (,5).033 (0,85).00.0 (0,6) (5,0).97 (5,0).00 (0,0).0 (5,08).5 (6,3). (,9) (0,5).393 ().063 5x (,6).0 (,8).06 5x (,7).0 (5,08) ø0,9 (ø035).0 (,8) PB layout seen component side H 8 Dimensions are shown: Inch (mm)

28 TERMINTIONS RTE Series Low Profile Rotary DIP Switches M OPTION H.35 (8,0).8 (7,).9 (7,) DIP.5 (3,9).9 (7,). (3,65).07 (,8).67 (,5) HOLES.035 (0,9) 8.3 (7,6).300 (7,6±0,).358 (9,).0 (,05) SWITH FUNTION 0 SINGLE POLE BD ODE BD OMPLEMENT ODE POS. 3 3 POS POS Other codes available by request. 3 GREY ODE ( for RTE0 only ) HEXDEIML ODE 7 GREY ODE (for RTE0 only) POS POS POS. 8 3 (for RTE6 only) POS B D E F ONTT MTERIL OPTION ODE RoHS OMPLINT RoHS OMPTIBLE ONTT MTERIL TERMINL PLTING YES YES GOLD LED FREE TIN H 9 Dimensions are shown: Inch (mm)

29 .06 (,6) RTE Series Low Profile Rotary DIP Switches BUTTONS VILBLE Buttons are ordered separately, shipped in bulk. H DIP Part Number BTN RTE 0 BTN RTE 50 BTN RTE 90 olor Red Green Black.08 (0,7) 3.8 (3,0).85 (,7).8 (3,0) ø.83 (7,).059 (,5) TPE ND REEL Tape and reel for RTExx0Gxx 750 pieces per reel..0 (0,3).069 (,75).55 (,0).55 (,0).7 () (,0).079 (,0) E.0 (0,3 ).57 (,0).57 (,0).079 (,0).7 (,0).079 (,0).7 (,0).069 (,75) D.69 (6,0).95 (7,5).09 (0,) ().95 (,0).53 (,50).3 (6).5 (). (3).307 (7,8).303 (7,7) E.059 (,6) FEED DIRETION Tape and reel for RTExx00Gxx,50 pieces per reel..79 (,5).303 (7,7) D.059 (,5) FEED DIRETION H 30 Dimensions are shown: Inch (mm)

30 D Series 8mm DIP oded Rotary Switches Features/Benefits Process sealed withstands soldering and cleaning Thru-hole and surface mount models ompact size saves space 36% smaller than traditional 0mm DIP risp, positive detent ensures actuation RoHS compliant Typical pplications ddress switching applications Data storage devices omputer and peripherals Instrumentation H DIP Specifications ONTT RTING: 0. V 0 V or V D max. MEHNIL ND ELETRIL LIFE: D0 & D6: 0,000 actuations. D08:,000 actuations. ONTT RESISTNE: 50 milliohms max. initial. INSULTION RESISTNE: 00 megohms 50 V min. DIELETRI STRENGTH: 50 V RMS sea level. OPERTING TEMPERTURE: -5 to 85. STORGE TEMPERTURE: -0 to 85. SOLDERBILITY: Per MIL-STD-0F method 08D or EI RS- 86E, method 9 ( hour steam aging). PKGING: Switches supplied in rigid tubes in full-tube quantities only: this may affect order quantity. Tube quantity is 60 pieces per tube. Surface mount switches available in tape & reel packaging per EI 8, 800 per reel, surface mount with M0 actuator only. Materials OVER: PPS (UL9V-0), olor; Black. BSE: PPS (UL9V-0), olor; Black TUTOR: LP (UL 9V-0), olor White (DXXR) olor Black (DXX) Note: internal o-ring seal standard with all actuators. MOVBLE ONTTS: opper alloy with gold plate over nickel plate. STTIONRY ONTTS: opper alloy with gold plate over nickel plate. TERMINLS: opper alloy with gold plate over nickel plate. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. D Switch Function D08R 8 position, BD ctuator D0R 0 position, BD M0 Flush, screwdriver slot D0 0 position, BD complement D6R 6 position, Hexadecimal D6 6 position, Hexadecimal complement Terminations Right ngle, P Thru-hole P Thru-hole S Gull wing ontact/terminal Material B Gold/Gold Packaging NONE Tube R Tape & Reel (SMT, M0 actuator only) H 3 Dimensions are shown: Inch (mm)

31 D Series 8mm DIP oded Rotary Switches SWITHES WITH STNDRD OPTIONS H DIP P Mount D6RM0B.00 D B EF (8,0) (5,08) (8,0).05 (0,6) (7,6).00 TYP..03 TYP. (0.8) NO. QUNTITY PRT NUMBER POS. PER TUBE D08RM0B 8 60 D0RM0B 0 60 D0M0B 0 60 D6RM0B 6 60 D6M0B TYP (0,6).305 (7,75).300 (7,6).68 (,7).5 TYP (3,8).00 TYP (0,5).00 TYP (0,5) Right ngle Mount D0RM0B Ø.03 (0,8) TYP (5,08).330 (8,36).00 TYP..05 TYP. (0,6) STND-OFF.099 (,5).050. (,7) (8,0) (8,00) NO. QUNTITY PRT NUMBER POS. PER TUBE D08RM0B 8 60 D0RM0B 0 60 D0M0B 0 60 D6RM0B 6 60 D6M0B (0,5).00 (5,08).05 (0,6).38 (3,5).83 (,6) TYP (5,08).05 (0,6).00 TYP. (0,5) Surface Mount NO. QUNTITY PRT NUMBER POS. PER TUBE D0RM0SB (8,00) (5,08) (8,00).050 (,7) TYP..080 (,03) 8.30 (0,9).00 TYP..00 (5,08) D08RM0SB 8 60 D0RM0SB 0 60 D0M0SB 0 60 D6RM0SB 6 60 D6M0SB 6 60 Note: For tape and reel packaging, add R to end of part number..00 THK. (0,5).00 TYP. (,0).390 (9,90) (,7) (0,5).00 TYP. (0,5) H 3 Dimensions are shown: Inch (mm)

32 8 SWITH FUNTION D Series 8mm DIP oded Rotary Switches D08R 8 POSITION, BD TUTOR OLOR: WHITE H POS PIN INDITOR 7 XX &K D DIP Switches ship and to be solder processed in position 0 D0R 0 POSITION, BD TUTOR OLOR: WHITE D0 0 POSITION, BD OMPLEMENT TUTOR OLOR: BLK POS POS PIN INDITOR XX &K D Switches ship and to be solder processed in position 0 Switches ship and to be solder processed in position 7 D6R 6 POSITION, HEXDEIML TUTOR OLOR: WHITE D6 6 POSITION, HEXDEIML OMPLEMENT TUTOR OLOR: BLK POS B D E F POS B D E F PIN INDITOR B XX D EF &K D Switches ship and to be solder processed in position 0 Switches ship and to be solder processed in position F TUTOR M0 (STD.) FLUSH WITH SREWDRIVER SLOT TYP. (0,6) FLUSH TUTOR NOTE: Designed for #0 Phillips screwdriver. H 33 Dimensions are shown: Inch (mm)

33 D Series 8mm DIP oded Rotary Switches TERMINTIONS H DIP S P, THRU-HOLE TYP (0,6) D B EF 9 SURFE MOUNT (8,0).305 (7,75) (7,6).35 (8,00) (5,08) (8,0).05 (0,6).68 (,7).5 TYP (3,8).00 TYP (0,5) (5,08) (8,00).050 (,7) TYP (7,6).00 TYP (0,5).080 (,03) 8.30 (0,9).00 TYP..03 TYP. (0.8).00 TYP..00 (5,08) RIGHT NGLE, P THRU-HOLE Ø.03 (0,8) TYP (5,08).330 (8,36) 8.00 (0,5).00 (5,08).05 (0,6).38 (3,5).00 TYP..05 TYP. (0,6) STND-OFF.099 (,5).83 (,6) TYP (,7) (8,0) (5,08) 5.35 (8,00).05 (0,6).00 TYP. (0,5).00 THK. (0,5).00 TYP. (,0).390 (9,90) (,7) (0,5).00 TYP. (0,5) ONTT MTERIL OPTION ODE B RoHS OMPLINT* RoHS OMPTIBLE* ONTT MTERIL TERMINL PLTING YES YES GOLD GOLD LOW LEVEL/DRY IRUIT RTING 0. V 0 V or D MX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. TPE & REEL For part number DxxM0SB FEED DIRETION.57 (,0).630 (6,0).079 (,0).059 DI (,5Ø).069 (,8).9 (,9).335 (8,5).95 (,0) Reel Information Outside diameter 3.00 (333,0) Pilot hole.5 (3,0).03 (0,) H 3 Dimensions are shown: Inch (mm)

34 RD Series 0mm DIP oded Rotary Switches Features/Benefits Process sealed withstands soldering and cleaning Thru-hole and surface mount models risp, positive detent ensures actuation omputer and peripherals RoHS compliant Typical pplications ddress switching applications Data storage devices omputer and peripherals Instrumentation H DIP Specifications ONTT RTING: 0. V, D 0 V max. ELETRIL LIFE: 0,000 steps 5 V D 0 m. MEHNIL LIFE: 30,000 steps min. ONTT RESISTNE: 00 milliohms max. V D 0 m. INSULTION RESISTNE: 000 megohms 00 V D DIELETRI STRENGTH: 300 V for minute. OPERTING TEMPERTURE: -0 to 85. STORGE TEMPERTURE: -0 to 85. OPERTING FORE: 000 grams max. PKGING: Switches supplied in anti-static tubes in full quatities only. This may affect order quantity. Surface mount models with MO actuators available in tape and reel, 500 pieces per reel. Materials OVER: PPS (black) HOUSING: PPS (black) TUTOR: P 6T M0 actuator option; PBT L and W actuator option. ONTTS: Beryllium opper with Gold over Nickel plate TERMINLS: Brass with Gold Nickel plate. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. How To Order The Build- Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. R D Switch Function RD0R 0 position, BD RD0 0 position, BD complement RD6R 6 position, Hexadecimal RD6 6 position, Hexadecimal complement ctuator M0 Flush, screwdriver slot L* Extended, screwdriver slot W* Wheel Packaging (None) Tube R Tape & Reel (M0 actuator only) Terminations Right angle, P thru-hole P Thru-hole S Gull wing ontact /Terminal Material B Gold/Gold * Note - L and W actuators are not available in termination S H 35 Dimensions are shown: Inch (mm)

35 RD Series 0mm DIP oded Rotary Switches SWITHES WITH STNDRD OPTIONS H DIP P Mount (0,0) (0,0) (7,6) TYP. (0,8) NO. QUNTITY PRT NUMBER POS. PER TUBE RD0RM0B 0 5 RD6RM0B (0,5).36 (6,0).300 (7,6).6 (3,7) Ø.00 (,0) (8,).0 TYP..00 (0,6) Right ngle Mount.97 (5,0).7 (,0).97 (5,00) 3 NO. QUNTITY PRT NUMBER POS. PER TUBE RD0RM0B 0 5 RD6RM0B (5,08) (0,5).7 (5,5) (3,5) (8,) 6.0 TYP..00 (0,6).00 (5,08).03 TYP. (0,8) Surface Mount (0,0) (0,0).00 TYP..30 (0,9) 8.0 (6,0).050 (,7) NO. QUNTITY PRT NUMBER POS. PER TUBE RD0RM0SB 0 5 RD6RM0SB (0,5) TYP..03 (0,8).36 (6,0).035 (0,9).366 TYP. (9,3).00 (0,5) Ø.00 (,0) (8,).0 TYP. (0,6).00 H 36 Dimensions are shown: Inch (mm)

36 SWITH FUNTION RD Series 0mm DIP oded Rotary Switches RD0R 0 POSITION, BD TUTOR OLOR: RED RD0 0 POSITION, BD OMPLEMENT TUTOR OLOR: ORNGE H DIP POS POS Switches ship and to be solder processed in position 0 Switches ship and to be solder processed in position 7 PIN INDITOR 8 7 XX &K RD0R RD6R RD6 6 POSITION, HEXDEIML TUTOR OLOR: BLK 6 POSITION, HEXDEIML OMPLEMENT TUTOR OLOR: WHITE POS B D E F POS B D E F PIN INDITOR XX B D E 9 F &K RD6R Switches ship and to be solder processed in position 0 Switches ship and to be solder processed in position F TUTOR L* W* (STD.) FLUSH WITH SREWDRIVER SLOT EXTENDED WITH SREWDRIVER SLOT WHEEL.039 (,0) FEDB9.57 (,0) 6 5 FLUSH TUTOR Ø.57 (,00) 0.76 (7,0) (,0).039 (,0) 0.8 (3,0) NOTE: Designed for #0 Phillips screwdriver. * L and W actuators are not available in termination S Dimensions are shown: Inch (mm) H 37

37 RD Series 0mm DIP oded Rotary Switches TERMINTIONS P, THRU-HOLE RIGHT NGLE, P THRU-HOLE H DIP.00 (0,5) S (0,0).300 (7,6) 3 SURFE MOUNT 8.6 (3,7).39 (0,0).36 (6,0) Ø.00 (,0) (7,6).330 (8,) TYP. (0,8).0 TYP..00 (0,6).97 (5,0).00 (5,08).7 (,0) (5,08).00 (0,5).97 (5,00).7 (5,5) TYP. (0,8).38 (3,5) (8,) TYP..00 (0,6) (0,0) (0,0).00 TYP..30 (0,9) 8.0 (6,0).050 (,7).00 (0,5) TYP..03 (0,8).36 (6,0).035 (0,9).366 TYP. (9,3).00 (0,5) M0 Ø.00 (,0) (8,).0 TYP. (0,6).00 ONTT MTERIL OPTION ODE B RoHS OMPLINT* RoHS OMPTIBLE* ONTT MTERIL TERMINL PLTING YES YES GOLD GOLD LOW LEVEL/DRY IRUIT RTING 0. V 0 V or D MX. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. TPE & REEL.58 (,0).630 (6,0).079 (,0).059 DI (,5).069 (,8).35 (8,0).95 (,0) FEED DIRETION H 38 Dimensions are shown: Inch (mm)

38 Product Selection Guide Series TF TFS TF TM L L LS Switch Type Poles/Throws Miniature SPST, SPDT Sealed Miniature SPDT Sealed Miniature SPDT Miniature SPST, SPDT Subminiature Precision SPST, SPDT Subminiature SPDT Sealed Subminiature SPST Maximum urrent mps 0 mps 0 mps 5 mps 0. mps 0 mps 6 mps Terminations Solder Turret Quick onnect Screw Wire Leads P Formed P Extended Operations Sealed Page No. 6 - / Series MM ZM ZM ZMB ZMS ZMSM MDS HB Switch Type Subminiature Precision Subminiature Subminiature Subminiature Sealed Subminiature Sealed Subminiature Subminiature Standard Precision Poles/Throws SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPST, SPDT Maximum urrent 7 mps 3 mps 3 mps 0. mps 3 mps 3 mps 300 m mps 0 mps Terminations Solder Quick onnect Wire Leads Screw PB Thru-hole Flat & Step Base Bushing Sealed 5/3-3 Page No Dimensions are shown: Inch (mm)

39 Product Selection Guide Series TL DS LB Switch Type Poles/Throws Maximum urrent General Purpose SPST, SPDT, DP 30. mps Door Interlock SPDT 5 mps Door Interlock SPDT DPDT 0., 0, 6 Subminiature SPST SPDT 5 Terminations Solder Quick onnect Wire Leads Screw PB Thru-hole Flat & Step Base Bushing 3/8-3 Page No Dimensions are shown: Inches (mm)

40 Technical Data HOW TO HOOSE PREISION SNP-TING SWITHES ND TUTORS This catalog describes electric switches that satisfy the following definition: precision snap-acting switch is a mechanically operated electric switch having predetermined and accurately controlled characteristics and having contacts other than blade-and-jaw, or mercury-type, where the maximum separation between any butting contacts is /8 inch. In choosing a switch, the first thing to consider is its electrical rating. s a basic part of an electric control system, the switch must be able to carry the full load current in the system, to interrupt this current, and to handle any surge of current that may occur when the switch contacts close or any transients that occur when contacts open. The method of applying mechanical force to operate the switch influences the choice of actuator. Basic switches are provided with leaf spring, levers, or other linkages between the switch plunger and the actuating device, which are typically used to provide additional overtravel and reduce the operating force. The differential travel measured at the free end of the leaf or lever is considerably greater than that measured at the switch plunger and max. operating force is adequately smaller. Table relates types of actuators to means of applying operating force. TUTOR MOTION OF PPLIED OPERTING FORES Reverse-cting Overtravel Roller Roller Hinged Hinged Reverse-cting Hinged Pin Plunger Plunger Leaf Leaf Lever Roller Lever Hinged Lever Roller Lever Basic D, Q, R L W T Y F M Rotary LEVER ngular SLIDE Wedge PLUNGER In-Line BI-METL or BELLOWS Slow In-Line 3 Suitable for this actuating method. Where large overtravel is required. Do not use when there is side thrust. 3 Use only where the actuating device contains provisions for absorbing excess over travel. ELETRIL LIFE HRTERISTIS FOR SNP-TING SWITHES The primary limitation to electrical life of a switch is wear of the contacts. In general, contacts wear out more quickly as current or voltage is increased and as power-factor is decreased. This is indicated by the graph below, which shows electrical life of switches tested under ordinary atmospheric conditions, operated 60 times a minute, with power handled on both the normally open and the normally closed contacts. The high inrush current encountered in lamp loads and in motor or other inductive loads is responsible for decreased contact life under such loading. 0 TYPIL ELETRIL LIFE OF TYPE HB SWITH 5 mperes 0 50 V, RESISTIVE 50 V, 0.5 P.F. 5 V, RESISTIVE 5 V, 0.5 P.F Millions of Operations Dimensions are shown: Inch (mm)

41 Technical Data MEHNIL LIFE HRTERISTIS FOR SNP-TING SWITHES Fatigue of the internal spring blade is the limiting factor in the mechanical life of a switch. This fatigue can often be reduced and the life thereby extended, by reducing overtravel. One method is to use a leaf or lever actuator or a plunger containing an overtravel-absorbing spring. Tests on switches of the types covered in this catalog indicate that the mechanical life of a lever actuated switch is more than double that of a switch having the operating force applied directly on the pin. Mechanical life is also affected by the combination of total travel and operating force. Thus a high-sensitivity switch which has small travel and light force, has about twice the life expectancy of a high current type switch, in which the travel/ force combination is relatively high. Experience indicates that million of operations is a reasonable mechanical life expectancy for a basic snap switch. For the best mechanical life, the applied overtravel force should not exceed three times the operating force. RTINGS FOR SNP-TING SWITHES Switches used to control alternating current loads, up to the ratings shown in this catalog, will maintain repeatability of characteristics and provide long electrical life (refer to graph on page K-3). In special circumstances, higher currents or voltages may be controlled, but changes in performance must be anticipated. Switches used to control dry circuits can be furnished, but factory recommendations should be secured. D RTINGS FOR SNP-TING SWITHES To use the table below, determine the contact separation of the switch and select the ratings from the appropriate line. The maximum current rating must be limited to the current value listed for that switch type in the body of the catalog. TUTOR INDUTIVE ONTT SEPRTION Inches.00 DIRET URRENT VOLTGE Volts Heater Load Lamp Load (tungsten) Normally Normally Normally Normally Open losed Open losed ontact ontact ontact ontact mperes mperes mperes mperes Motor, Relay, or Solenoid Load Sea Level ,000 Feet Normally Normally Normally Normally Open losed Open losed ontact ontact ontact ontact mperes mperes mperes mperes Dimensions are shown: Inches (mm)

42 TF Series Miniature Switches Features/Benefits Broad range of operating forces Ratings up to MPS Wide variety of actuator styles Quick connect terminations Typical pplications Motor controls Thermostatics Portable tools Specifications ONTT RTING: From low level* to 77 V. ELETRIL LIFE: 300,000 cycles at 0 50 V, consult ustomer Service enter for typical life of higher rated switches. INSULTION RESISTNE:,000 M ohm min. DIELETRI STRENGTH:,500 Vrms sea level. OPERTING TEMPERTURE: 0ºF to 85ºF ( 0º to 85º). OPERTING FORE: From 5 to 00 grams at actuator button available. MOUNTING: Torque screws -5 in/lbs. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. Standard electrical life per UL 05, rated for 6,000 operations. Materials SWITH HOUSING: Thermoplastic (UL 9V-0). TUTOR BUTTON: Thermoplastic (UL 9V-0). SPRING: opper alloy. PIVOT: Brass alloy. MOVBLE ONTTS: Gold alloy for ratings MP or less. Fine silver for ratings greater than MP up to 5 MPS. Precious metal alloy for ratings greater than 5 MPS. STTIONRY ONTTS: Gold alloy for ratings MP or less. Fine silver for ratings greater than MP. TERMINLS: Brass alloy for ratings up to 0 MPS. opper alloy for ratings greater than 0 MPS. NOTE: Specifications and materials listed above are switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -6 through -. For additional options not shown in catalog, consult ustomer Service enter. T F Series TF SP, Mom. Operating Force 5.9 oz./50 grams.53 oz./5 grams D.88 oz./5 grams F.76 oz./50 grams G.65 oz./75 grams E 7.9 oz./5 grams EE. oz./00 grams Electrical Rating 6 5, 77 V ; / HP, 5, 50 V ; 5, 5 V L, 0.5, 5 V D; 0.5, 50 V D F5,5 V ;, 3O V D H8 5, 77 V ; /0 HP, 5, 50 V 3, 77 V ; HP, 5 V ; HP, 50 V ; 5, 5 V L K6, 77 V ; /3 HP, 5, 50 V ; 0.5, 5 V D; 0.5, 50 V D L3 0, 50 V ; HP, 5 V ; HP 50 V Mounting Style S Standard V Metric ctuator P00 Pin plunger 0.8" lever roller, high force 5.3" lever roller, high force 0.05 lever roller, low force 5.56" lever roller, low force T0.8" lever, high force T3.3" simulated roller, high force T.9" simulated roller, high force T5.0" lever, high force T6.3" lever, high force T8.75" lever, high force T0.0" lever, low force T3.56" simulated roller, low force T.50 simulated roller, low force T5.6" lever, low force T6.57" lever, low force T8.97 lever, low force WP0 Wide pin plunger Terminations 0.87" quick connect.50" quick connect 5.50" offset quick connect 5B.87" offset quick connect ircuitry SPDT W SPST N.. Y SPST N.O. 6 Dimensions are shown: Inch (mm)

43 TF Series Miniature Switches TF MINITURE SNP-TING SWITHES SP MOMENTRY SERIES.3 (8,8) 0.7 (8,7) OPERTING FORE OPTION ODE BSI SWITH OPERTING FORE (OZ./GRMS).53 5 D.88 5 F G E EE*. 00 *Minimums may apply, consult ustomer Service enter. Operating Force option not available with T8 & T6 ctuator options. Operating force varies with actuator option, see TUTOR option section. ELETRIL RTING ONTT MTERIL OPTION ODE RoHS OMPLINT * RoHS OMPTIBLE * MOVBLE ONTT STTIONRY ONTT ELETRIL RTING F5 Yes Yes Gold alloy Gold alloy From low level* to 5 V, 30 V D. H8 Yes Yes 5 77 V ; /0 5 & 50 V. 3 Yes Yes 6 Yes Yes Fine Silver Fine Silver 77 V ; 5 V ; 50 V ; 5 5 V L V ; / 5 & 50 V ; 5 5 V L V D; V D. K6 Yes Yes 77 V ; /3 5 & 50 V ; V D; V D. L3 Yes Yes Silver alloy 0 50 V ; 5 V ; 50 V * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. ll models onsult ustomer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. 7 Dimensions are shown: Inches (mm)

44 TF Series Miniature Switches ELETRIL RTING OPERTING FORE ELETRIL MPS D F G E EE RTING (REF.) (5) (5) (50) (75) (50) (5) (00) F5 H8 5 3 X X X X 6 5 X X X X K6 X L3 0 X X X X VILBLE x NOT VILBLE ** vailable with & 5 terminations only, see page -0. ll models onsult ustomer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. MOUNTING STYLE S STNDRD For -0 screw size V Metric For 3 mm screw size 8 Dimensions are shown: Inch (mm)

45 TF Series Miniature Switches TUTOR OPTION ODE FIG. DIM. DIM. B DIM. DIM. D P00.80 (0,3).578 ±.05 (,68 ± 0,38) 0.8 (0,6).3 (8,).80 ±.00 (0,57 ± 0,5).9 dia. (,8Ø) 5.3 (3,0).3 (8,).80 ±.030 (0,57 ± 0,76).9 dia. (,8Ø) 0.05 (6,7) 5.56 (39,6).5 (3,7).5 (3,7).80 ±.050 (0,57) ±,7.80 ±.075 (0,57 ±,9).9 dia. (,8Ø).9 dia. (,8Ø) T0 T (,3).0 (35,6).3 (8,).3 (8,).600 ±.00 (5, ± 0,5).600 ±.00 (5, ±,0) T6 3.3 (59,).3 (8,).600 ±.065 (5, ±,65) T8 T (69,9).0 (7,9).3 (8,).5 (3,7).600 ±.080 (5, ±,03).600 ±.050 (5, ±,7) T5 T6 T8 T3 T T3 T WP (,).57 (65,3).97 (75,).3 (3,0).9 (3,8).56 (39,6).50 (38,).80 (0,3).5 (3,7).5 (3,7).5 (3,7).3 (8,).3 (8,).5 (3,7).5 (3,7).600 ±.070 (5, ±,78).600 ±.50 (5, ± 3,8).600 ±.87 (5, ) ±,75.80 ±.030 (0,57 ±0,76).730 ±.030 (8,5 ± 0,76).80 ±.065 (0,57 ±,65).730 ±.060 (8,5) ±,5.635 ±.05 (6,3 ± 0,38).9 dia. (,8Ø).9 dia. (6,Ø).9 dia. (,8Ø).5 dia. (6,Ø) NOTE: Switch characteristics chart on following page. 9 Dimensions are shown: Inches (mm)

46 TF Series Miniature Switches TUTOR SWITH HRTERISTIS OPTION ODE MXIMUM OPERTING FORE (OZ./GRMS) D F G E EE (5) (5) (50) (75) (50) (5) (00) MINIMUM RELESE FORE (OZ./GRMS) D F G E EE (5) (5) (50) (75) (50) (5) (00) MXIMUM DIFFERENTIL TRVEL LL FORES MXIMUM PRETRVEL LL FORES MINIMUM OVERTRVEL LL FORES (0,38).060 (,5).030 (0,76) (0,76) (,65) (0,6) 0. (3,05) (,0) (,7).50 (6,35).0 (3,05) P (0,5).07 (,9).050 (,7) T (0,38).060 (,5).030 (0,76) T (0,76) (,65) T (0,76) (,5) T5 T (0,76).05 (,).0 (,79).50 (6,35).065 (,65).5 (3,8) T8 T0 T3 T T5 N/ N/ (,57).030 (0,76).050 (,7).005 (,7).055 (,0).300 (7,6).0 (3,56).50 (6,35) 0.3 (5,8).50 (6,35).55 (3,9).060 (,5).0 (3,05) 0. (.79).5 (3,8) T6 T8 N/ N/ N/ N/ N/ N/ N/ N/ (3,05).500 (,70) (.).35 (5,97) 0.85 (7,) WP (0.5).07 (,9).030 (0,5) NOTE: For basic switch operating forces, see page -6. HIGH FORE, LOW MOTION PIVOT POSITION LOW FORE, HIGH MOTION PIVOT POSITION vailable with actuators 0, 5, T0, T3, T, T5, T6 and T8. vailable with actuators 0, 5, T0, T3, T, T5, T6, and T8. NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. 0 Dimensions are shown: Inch (mm)

47 TF Series Miniature Switches TERMINTIONS 0.87" QUIK ONNET.50" QUIK ONNET 5 OFFSET.50" QUIK ONNET 5B OFFSET.87" QUIK ONNET IRUITRY W Y SPDT (Single Pole, Double Throw) SPST N.. (Single Pole, Single Throw, Normally losed) SPST N.O. (Single Pole, Single Throw, Normally Open) Dimensions are shown: Inches (mm)

48 TFS Series Splash Proof Miniature Switches Features/Benefits Reliable snap action mechanism Low cost - high performance RoHS compatible Typical pplications larm devices / Home security ir conditioner Food processor Water heaters Industrial Forklifts UL6058- Specifications ONTT RTING / ELETRIL LIFE: 5/50 V / 0,000 operations 5/50 V / 0,000 operations 5/50 V / 0,000 operations 5/50 V / 0,000 operations ELETRIL OPERTING FREQUENY: 0-30 operations per min. MEHNIL LIFE:,000,000 operations MEHNIL OPERTING FREQUENY: 0 operations per min. INSULTION RESISTNE: (at 500 VD/minute) 00 M ohm min. DIELETRI STRENGTH: 500 V (50-60 Hz) OPERTING TEMPERTURE: 0º to 85º (with no icing) OPERTING FORE: 00 grams. Materials SE: Nylon OVER: PBT TUTOR: PBT MOVBLE ONTTS: Silver alloy TERMINLS: Brass LEVER: Stainless steel WIRE: PV+U NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages - thru -5. For additional options not shown in catalog, consult ustomer Service enter. T F S S 0 Electrical Rating OPERTING FORE ELETRIL MPS S D L H RTING (GRMS) (00) (50) (00) (50) (300) 0 0. ircuit rrangement SPDT Y SPST N.O. W SPST N.. Mounting Hole Size NONE 3. mm (3 mm screw clearance hole) S.9 mm (-0 screw clearance hole) X X X vailable X Not available Operating Force S 00 grams D 50 grams 00 grams L 50 grams H 300 grams ctuator Lever Fixed P00 Button T0 Lever - high force T0 Lever - low force 05 Lever roller - High force, short lever 0 Lever roller - high force 0 Lever roller - low force 5 Lever roller - Low force, short lever Terminal Type 0.87 quick connect

49 TFS Series Splash Proof Miniature Switches SERIES TFS SUB-MINITURE SNP-TING SWITHES 0. REF 3. 3-#87 QUIK ONNET TERMINL 0.5 TYP TYP REF ELETRIL RTING OPTION ODE RoHS RoHS OMPLINT OMPTIBLE ELETRIL RTING 0 Yes Yes 5/50 V / 0,000 operations 06 Yes Yes 5/50 V / 0,000 operations 03 Yes Yes 5/50 V / 0,000 operations 0 Yes Yes 5/50 V / 0,000 operations OPERTING FORE OPTION ODE S D L H BSI SWITH OPERTING FORE 00 GRMS 50 grams 00 grams 50 grams 300 grams Third ngle Projection 3 Dimensions are shown: mm

50 TFS Series Splash Proof Miniature Switches TUTOR P00 BUTTON T0 LEVER, HIGH FORE T0 LEVER, LOW FORE FP.7 FP OP FP OP Measure at Point Measure at Point Measure at Point Max. operating force 00 grams Max. operating force 60 grams Max. operating force 90 grams Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 30 grams.7 ± 0. mm 0. mm.0 mm. mm Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 5 grams 5. ± 0.6 mm 0.6 mm. mm.6 mm Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 0 grams 5 ±. mm. mm. mm 5. mm 05 LEVER ROLLER HIGH FORE, SHORT LEVER LEVER ROLLER HIGH FORE LEVER ROLLER LOW FORE FP OP FP OP Measure at Point Measure at Point Measure at Point Max. operating force 00 grams Max. operating force 30 grams Max. operating force 70 grams Min. release force Operating position OP Max. movement differential Min. over travel OT 30 grams 0.6 ± 0.5 mm 0.5 mm.0 mm Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0. ± 0.7 mm 0.7 mm.3 mm Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0. ±. mm. mm.5 mm Max. pre-travel PT. mm Max. pre-travel PT 3.3 mm Max. pre-travel PT 6.5 mm Dimensions are shown: mm

51 TFS Series Splash Proof Miniature Switches TUTOR 5 LEVER ROLLER LOW FORE, SHORT LEVER Measure at Point 7.8 Max. operating force 50 grams 6.6 Min. release force 5 grams Operating position OP Max. movement differential Min. over travel OT 0. ± 0.9 mm 0.9 mm. mm Max. pre-travel PT. mm TERMINL TYPE 0.87 QUIK ONNET 0. REF 3. 3-#87 QUIK ONNET TERMINL 0.5 TYP TYP.75 REF IRUITRY Y W SPDT (Single Pole, Double Throw) SPST N.O. (Single Pole, Single Throw, Normally Open) SPST N.. (Single Pole, Single Throw, Normally losed) MOUNTING HOLE SIZE NONE 3. mm (3mm SREW LERNE HOLE) S.9 mm (-0 SREW LERNE HOLE) Third ngle Projection 5 Dimensions are shown: mm

52 TFS Series Sealed Miniature Switches (Water Proof) Features/Benefits IP67 Reliable snap action mechanism Low cost - high performance RoHS compatible Typical pplications larm devices / Home security ir conditioner Food processor Water heaters Industrial Forklifts UL6058- Specifications ONTT RTING / ELETRIL LIFE: 5/50 V / 0,000 operations 5/50 V / 0,000 operations 5/50 V / 0,000 operations 5/50 V / 0,000 operations ELETRIL OPERTING FREQUENY: 0-30 operations per min. MEHNIL LIFE:,000,000 operations MEHNIL OPERTING FREQUENY: 0 operations per min. INSULTION RESISTNE: (at 500 VD/minute) 00 M ohm min. DIELETRI STRENGTH: 500 V (50-60 Hz) OPERTING TEMPERTURE: see wire type OPERTING FORE: 00 grams. Materials SE: Nylon OVER: PBT TUTOR:PBT MOVBLE ONTTS: Silver alloy. TERMINLS: Brass. LEVER: Stainless steel WIRE: PV+U NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -7 thru -9. For additional options not shown in catalog, consult ustomer Service enter. T F S S W Electrical Rating see chart below Operating Force S 00 grams D 50 grams 00 grams L 50 grams ctuator Lever Fixed H 300 grams P00 Button T0 Lever - high force T0 Lever - low force 05 Lever roller - WIRE TYPE High force, short lever 0 Lever roller - high force ELETRIL MPS D E F G WG 0 Lever roller - low force RTING 6WG 8WG 0WG WG H 6WG 5 Lever roller Low force, short lever 03 3 X X Terminal Type W Wire ircuit rrangement SPDT Y SPST N.O. W SPST N.. Wire Type 6 WG D 8 WG E 0 WG F WG G WG H 6 WG Wire UL # B UL05 (T55) OPERTING TEMPERTURE Mounting Hole Size NONE 3. mm (3 mm screw clearance hole) S.9 mm (-0 screw clearance hole) 06 6 X X X 0 0 X X X X -0 to + 85 (with UL05 wire) vailable X Not available 6 Dimensions are shown: mm

53 TFS Series Sealed Miniature Switches (Water Proof) SERIES TFS SUB-MINITURE SNP-TING SWITHES WTERPROOF 0. REF OM : BLK / UL05 6WG OR EQUIVLENT N : RED / UL05 6WG OR EQUIVLENT NO : BLUE / UL05 6WG OR EQUIVLENT OPTION ODE RoHS RoHS OMPLINT OMPTIBLE ELETRIL RTING ELETRIL RTING 0 Yes Yes 5/50 V / 0,000 operations 06 Yes Yes 5/50 V / 0,000 operations 03 Yes Yes 5/50 V / 0,000 operations 0 Yes Yes 5/50 V / 0,000 operations OPERTING FORE OPTION ODE S D L H BSI SWITH OPERTING FORE 00 GRMS 50 grams 00 grams 50 grams 300 grams Third ngle Projection 7 Dimensions are shown: mm

54 TFS Series Sealed Miniature Switches (Water Proof) TUTOR P00 BUTTON T0 LEVER, HIGH FORE T0 LEVER, LOW FORE FP.7 FP OP FP OP Measure at Point Measure at Point Measure at Point Max. operating force 00 grams Max. operating force 60 grams Max. operating force 90 grams Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 30 grams.7 ± 0. mm 0. mm.0 mm. mm Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 5 grams 5. ± 0.6 mm 0.6 mm. mm.6 mm Min. release force Operating position OP Max. movement differential Min. over travel OT Max. pre-travel PT 0 grams 5 ±. mm. mm. mm 5. mm 05 LEVER ROLLER HIGH FORE, SHORT LEVER LEVER ROLLER HIGH FORE LEVER ROLLER LOW FORE FP OP FP OP Measure at Point Measure at Point Measure at Point Max. operating force 00 grams Max. operating force 30 grams Max. operating force 70 grams Min. release force Operating position OP Max. movement differential Min. over travel OT 30 grams 0.6 ± 0.5 mm 0.5 mm.0 mm Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0. ± 0.7 mm 0.7 mm.3 mm Min. release force Operating position OP Max. movement differential Min. over travel OT 0 grams 0. ±. mm. mm.5 mm Max. pre-travel PT. mm Max. pre-travel PT 3.3 mm Max. pre-travel PT 6.5 mm Third ngle Projection 8 Dimensions are shown: (mm)

55 TFS Series Sealed Miniature Switches (Water Proof) TUTOR 5 LEVER ROLLER LOW FORE, SHORT LEVER Measure at Point 7.8 Max. operating force 50 grams 6.6 Min. release force 5 grams Operating position OP Max. movement differential Min. over travel OT 0. ± 0.9 mm 0.9 mm. mm Max. pre-travel PT. mm TERMINL TYPE W WIRE UL05 Y W SPDT (Single Pole, Double Throw) SPST N.O. (Single Pole, Single Throw, Normally Open) SPST N.. (Single Pole, Single Throw, Normally losed) IRUITRY WIRE TYPE D E F G H 6 WG 8 WG 0 WG WG WG 6 WG MOUNTING HOLE SIZE NONE 3. mm (3mm SREW LERNE HOLE) S.9 mm (-0 SREW LERNE HOLE) Third ngle Projection 9 Dimensions are shown: (mm)

56 TF Series Miniature Switches Features/Benefits Broad range of operating forces Ratings up to 0 MPS Wide variety of actuator styles Quick connect terminations Typical pplications Motor controls Thermostatics Portable tools ir onditioner Specifications ONTT RTING: From low level* to 0 V. ELETRIL LIFE: 0,000 cycles MEHNIL LIFE:,000,000 cycles at 0. and 6 00,000 cycles at 0 INSULTION RESISTNE:,000 M ohm min. DIELETRI STRENGTH:,500 Vrms sea level. OPERTING TEMPERTURE: 0º to 5º ( 0º to 85º). OPERTING FORE: From 8 to 330 grams at actuator button available. MOUNTING: Torque screws -5 in/lbs. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. Standard electrical life per UL 05, rated for 6,000 operations. Materials SWITH HOUSING: Nylon 6/6 TUTOR BUTTON: Nylon 6/6 SPRING: Stainless Steel PIVOT: Brass lloy MOVBLE ONTTS: See electric rating page - MOVBLE BLDE: Beu STTIONRY ONTTS: See electric rating page - TERMINLS: Brass lloy NOTE: Specifications and materials listed above are switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages - through -5. For additional options not shown in catalog, consult ustomer Service enter. T F Series TF SP, Mom. Operating Force 8 grams F 5 grams G 75 grams H 0 grams 70 grams E 30 grams EE 330 grams Electrical Rating hart OPTION ODE F5 H8 K /50 V (T85) Min. 0,000 operations 6 5/50 V (T85) Min. 0,000 operations 0 5/50 V (T85) Min. 0,000 operations 0. 5/50 V µt5, E 6 5/50 V µt5, E 0() 5/50 V µt5, E * Note: No UL & ENE 5 safety for Termination option 60 Mounting Style S Standard V Metric ctuator P00 Pin plunger 0 Lever roller.5 mm 5 Lever roller 5.9 mm 0 Lever roller.5 mm 5 Lever roller 5.9 mm T0 Lever mm T Simulated roller.5 mm T5 Lever 7.5 mm T6 Lever 3.7 mm T7 Lever 35 mm T0 Lever mm T Simulated lever.5 mm T5 Lever 7.5 mm T6 Lever 3.7 mm T7 Lever 35 mm see chart on following pages for detailed information Terminations 0.87" quick connect.50" quick connect 5.50" off set quick connect 5B.87" off set quick connect 60 Screw style * 0 Solder ircuitry SPDT W SPST N.. Y SPST N.O. 0 Dimensions are shown: mm

57 TF Series Miniature Switches SERIES TF MINITURE SNP-TING SWITHES.09 [7,8].06 [0,3].65 [,].0 [,8].795 [0,].0 [,8].66 [5,9].06 [0,3].579 [,7] OPERTING POSITION.87 [,] OPERTING FORE OPTION ODE BSI SWITH OPERTING FORE (grams) 8 F 5 G 75 H 0 70 E 30 EE* 330 *Minimums may apply, consult ustomer Service enter. ELETRIL RTING ONTT MTERIL OPTION ODE RoHS OMPLINT * RoHS OMPTIBLE * MOVBLE ONTT STTIONRY ONTT F5 Yes Yes H8 Yes Yes Silver alloy Silver alloy K6 Yes Yes * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. ll models Third ngle Projection Dimensions are shown: inches (mm)

58 TF Series Miniature Switches ELETRIL RTING INTERNTIONL RTING SYMBOLS Microgap construction µ (less than 3 mm). ~ T 50E3 0E3 0(3) lternating current. Maximum rated use temperature. ycles over 50,000 at rated current. ycles over 0,000 at rated current. urrent Rating: First number represents resistive rating; second number represents inductive (motor) rating. OPERTING FORE ELETRIL MPS F G H E EE RTING (REF.) (8) (5) (75) (0) (70) (30) (330) F5 0. X H8 6 X K6 0 X X X VILBLE x NOT VILBLE ll models onsult ustomer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. MOUNTING STYLE S STNDRD For -0 screw size V Metric For 3 mm screw size. [,9]. [,9]. [3,]. [3,].6 [3,] TF SWITH WITH TYPE 0 (.87 Q) TERMINLS ND P00 TUTOR SHOWN NOTE: TORQUE MOUNTING SREWS -5 IN/LBS..3 [3,] TF SWITH WITH TYPE 0 (SOLDER) TERMINLS ND P00 TUTOR SHOWN NOTE: TORQUE MOUNTING SREWS -5 IN/LBS. Third ngle Projection Dimensions are shown: inches (mm)

59 TF Series Miniature Switches TUTOR OPTION ODE P T0 3 T T5 3 T6 3 T7 3 T0 3 T T5 3 T6 3 T7 3 FIG DIM. DIM. B DIM. DIM. D DIM. E.795 (0,).8 (0,9).35 (3,3).05 (6,8).58 (0,).88 (,39).95 (3,9).05 (35,69).58 (0,0).708 (3.39). (8,3).57 (38,8).63 (,3).8 (6,00).9 (9,3) -.33 (8,).33 (8,).56 (,3) (,70 0,05) (0,73,7) (0,73,5) (0,73,7) (,3) (0,73,) (8,) (5,3 0,50) (8,) (8,7,5) (8,) (5,,5) (8,) (5,35,75) (8,) (5,33.57) (,3) (5,3,) (,3) (8,8,9) (,3) (5,7,3) (,3) (5,65 3.8) (,3) (5, 3.8) (.7).06 (,70).65 (,0).83 (,65).366 (9,30).0 (,80).6 (5,50).3 (5,90).96 (5,0).6 (5,50).0 (5,0).3 (8,70).38 (9,70).389 (9,90).33 (,0) -.9 (,8).9 (,8).9 (,8).9 (,8) -.75 ( 7,0) ( 7,0) NOTE: Switch characteristics chart on following page. Lever Roller DIM.B DIM. DIM.E DIM.D Pin Roller DIM. DIM.D DIM. DIM. FIG. LEVER ROLLER TFXXXXM50 FIG. PIN ROLLER TFXXXXMP000 Lever DIM.B DIM. DIM.D Simulated Roller DIM.B DIM. DIM.E DIM.D DIM. DIM. FIG. 3 LEVER TFXXXXST50 SHOWN FIG. SIMULTED ROLLER TFXXXXST0 3 Dimensions are shown: inches (mm)

60 TF Series Miniature Switches TUTOR Lever Type F G H E EE Grams Pre-Travel max. mm OF P00.7 RF T0 T0 T T T7 T7 T6 T6 T5 T5 OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF OF RF Max Differential max. mm Over Travel Min. mm HIGH FORE, LOW MOTION PIVOT POSITION.0 [,7] LOW FORE, HIGH MOTION PIVOT POSITION.58 [3,93] vailable with actuators 0, 5, T0, T3, T, T5, T6 and T8. vailable with actuators 0, 5, T0, T3, T, T5, T6, and T8. NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. Dimensions are shown: mm

61 TF Series Miniature Switches TERMINTIONS 0.87" QUIK ONNET.6 [3,].055 [,].50" QUIK ONNET.8 [6,3].55 [].85 [,7].36 [6].00 TYP [0,5].508 [,9].65 [,].06 6 [0,3].03TYP [0,8].6 [6,7].098 [,5].69 [5,98] REF 5.50 OFF SET QUIK ONNET 5B.87 OFF SET QUIK ONNET.07 TYP [,8].3 [0,9].87 [,75].5 [,9].79 [7,09].8 [6,3].350 [8,9].03 TYP [0,8].578 [,69].6 [6,7].098 [,5].69 [5,98] REF.8 [6,3].350 [8,9].055 TYP [,].578 [,69].03 TYP [0,8]. [5,7].098 [,5].69 [5,98] REF 60 SREW STYLE -0 X.5 (3,8) TYP. SREWS & LOKWSHERS 0 SOLDER.098 [,5] TYP.95 [7,5].95 [7,5].36 [6].03 [0,8].390 [9,9].36 [6].03 TYP [0,8].390 [9,9] IRUITRY W Y SPDT (Single Pole, Double Throw) SPST N.. (Single Pole, Single Throw, Normally losed) SPST N.O. (Single Pole, Single Throw, Normally Open) 5 Dimensions are shown: inches (mm)

62 TM Series Miniature Switches Features/Benefits Broad range of operating forces available Wide variety of actuator and terminal styles ost-effective solution Typical pplications Pumps and motors White goods onsumer appliances Specifications ONTT RTING: From low level* to 5 50 V. ELETRIL LIFE: 50,000 cycles at 5 50 V, models with 50 grams operating force. 350,000 cycles at 0 50 V, models with 75 grams operating force. INSULTION RESISTNE:,000 M ohms min. DIELETRI STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 67ºF to 30ºF ( 55º to 50º). OPERTING FORE: 50, 75 and 50 grams at actuator available; refer to chart for lever style forces. MOUNTING: Torque screws -5 in/lbs. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. Materials SWITH HOUSING: Thermoplastic or general purpose phenolic (UL 9V-0). TUTOR BUTTON: Thermoplastic (UL 9V-0). SPRING: opper alloy. PIVOT: Brass alloy. MOVBLE ONTTS: Gold alloy for ratings 5 V or less. Fine silver for ratings greater than 5 V. STTIONRY ONTTS: Gold alloy for ratings MP or less. Fine silver for ratings greater than MP. TERMINLS: Brass alloy for ratings up to 0 50 V. opper alloy for 5 50 V ratings. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -6 through -3. For additional options not shown in catalog, consult ustomer Service enter. vailable extended electrical life per UL 05, rated for 00,000 operations, consult factory. T M * ll models Series TM SP, Mom. Operating Force G.65 oz./75 grams 5.9 oz.,/50 grams F.76 oz./50 grams Electrical Rating D6 5 & 50 V ; /3 5 & 5O V 5 V D; 50 V D G6 5 & 50 V ; 50 V D; 5 V D; / 5 & 50 V ; 5 V L 5 V 30 V D H3 50 V ; /6 5 & 5O V Mounting Style S Standard V Metric ctuator P00 Pin plunger 0.8" lever roller, high force 5.3" lever roller, high force 0.0" lever roller, low force 5.56" lever roller, low force T0.8" lever, high force T3.3" simulated roller, high force T.9" simulated roller, high force T5.0" lever, high force T6.3" lever, high force T7.00" lever, high force T8.75" lever, high force T0.06" lever, low force T3.56" simulated roller, low force T.50" simulated roller, low force T5.6" lever, low force T6.56" lever, low force T7." lever, low force T8.97" lever, low force Terminations 0.87" quick connect 0 Solder.50" quick connect 60 Screw ircuitry SPDT W SPST N.. Y SPST N.O. 6 Dimensions are shown: Inch (mm)

63 TM Series Miniature Switches SERIES TM MINITURE SNP-TING SWITHES SP MOMENTRY OPERTING FORE OPTION ODE G F BSI SWITH OPERTING FORE (OZ./GRMS) Operating Force option F not available with T8, T7 and T8 actuator options. Operating force varies with actuator option, see TUTOR option section. ELETRIL RTING ONTT MTERIL OPTION ODE RoHS OMPLINT * RoHS OMPTIBLE * MOVBLE ONTT STTIONRY ONTT D6 Yes Yes Fine Silver Fine Silver ELETRIL RTING 0 5 & 50 V ; /3 5 & 50 V ; / 5 V D; / 50 V D. F5 Yes Yes Gold alloy Gold alloy From low level* to 5 V, 30 V D. 5 5 & 50 V ; V D; 0.5 G6 Yes Yes 5 V D; / 5 & 50 V ; 3 5 V L. Fine Silver Fine Silver H3 Yes Yes 5 50 V ; /6 5 & 50 V. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. * ll models ontact ustomer Service enter for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. 7 Dimensions are shown: Inches (mm)

64 TM Series Miniature Switches ELETRIL RTING VILBLE OMBINTIONS MXIMUM OPERTING FORE (OZ./GRMS) ELETRIL RTING D6 F5 G6 H3.76/50.65/75 5.9/50 F G x x VILBLE x NOT VILBLE * ll models ontact ustomer Service enter for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. S Standard MOUNTING STYLE V Metric Recommended maximum screw size: -0. Recommended maximum screw size: 3 mm. NOTE: Torque mounting screws -5 in/lbs. 8 Dimensions are shown: Inch (mm)

65 TM Series Miniature Switches TUTOR D OPTION ODE P00 0 FIG. DIM..80 (0,3).8 (0,6) DIM. B.36 (9,) DIM..578 ±.05 (,68 ± 0,38).80 ±.00 (0,57 ± 0,5) DIM. D.9 dia. (,8Ø) B 5.3 (3,0).36 (9,).80 ±.00 (0,57 ±,0).9 dia. (,8Ø) 0 5 T0 T (6,).56 (39,6).8 (,3).3 (3,0).58 (,7).58 (,7).36 (9,).36 (9,).80 ±.050 (0,57 ±,7).80 ±.080 (0,57 ±,03).600 ±.00 (5, ± 0,5).80 ±.00 (0,57 ±,0).9 dia. (,8Ø).9 dia. (,8Ø).9 dia. (,8Ø) FIG. Lever Roller B FIG. Pin Roller T T5 3.8 (3,5).0 (35,6).36 (9,).36 (9,).73 ±.050 (8,9 ±,3).600 ±.00 (5, ±,0).36 dia. (6,0Ø) T6 3.3 (59,).36 (9,).600 ±.06 (5, ±,57) T7 T (50,8).75 (69,9).36 (9,).36 (9,).600 ±.05 (5, ±,57).600 ±.093 (5, ±,36) FIG. 3 Lever T0 T3 T T5 T (6,9).56 (39,6).50 (38,).6 (,).56 (65,0).58 (,7).58 (,7).58 (,7).58 (,7).600 ±.05 (5, ±,).80 ±.065 (0,57 ±,65).73 ±.090 (8,80 ±,9).600 ±.080 (5, ±,03).9 dia. (,8Ø).36 dia. (6,0Ø) ±.5 (,7) (5,±3.8) B D T7 3. (56,) ±.5 (,7) (5,±3.8) T (75,) ±.87 (,7) (5,±.75) FIG. Simulated Roller HIGH FORE, LOW MOTION PIVOT POSITION LOW FORE, HIGH MOTION PIVOT POSITION vailable with actuators 0, 5, T0, T3, T, T5, T6, T7 and T8. vailable with actuators 0, 5, T0, T3, T, T5, T6, T7 and T8. NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. 9 Dimensions are shown: Inches (mm)

66 TM Series Miniature Switches TUTOR SWITH HRTERISTIS OPTION ODE MXIMUM OPERTING FORE (OZ./GRMS) F G (50) (75) (50) MINIMUM RELESE FORE (OZ./GRMS) F G (50) (75) (50) MINIMUM RETURN FORE (OZ./GRMS) F G (50) (75) (50) MXIMUM DIFFERENTIL TRVEL LL FORES MXIMUM PRETRVEL LL FORES MINIMUM OVERTRVEL LL FORES T (0,33).080 (,03).035 (0,89) T (0,76).60 (,06).065 (,65) T (,7).0 (3,56).06 (,57) T (0,8).60 (,06).075 (,90) T (,9).3 (7,9).0 (3,56) T (,57).0 (5,59).0 (,79) T8 N/ N/..8 8 N/ (,98).375 (9,5).60 (,06) T (0,76).60 (,06).065 (,65) T3 T (,78).080 (,03).3 (7,9).3 (7,9).5 (3,8).0 (,79) T5 T6 T7 T N/ N/ N/ N/ N/ N/ N/.0 N/ N/ (,78).0 (,79).5 (3,8).87 (,75).330 (8,38).500 (,7).500 (,70).750 (9,05) (6,35).00 (5,08).80 (7,) (0,33).070 (,78).035 (0,89) (0,76).60 (,06).065 (,65) (0,6).0 (3,56).060 (,5) (,78).3 (7,9).5 (3,8) P (0,33).056 (,).035 (0,89) NOTE: For basic switch operating forces, see page -6. Dimensions are shown: Inch (mm) 30

67 TM Series Miniature Switches TERMINTIONS 0.87" QUIK ONNET 60 SREW TERMINLS Torque screws to 6 in. lbs max. Not available with F5 rating option. 0 SOLDER.50" QUIK ONNET Not available with F5 rating option. Not available with F5 rating option. IRUITRY W Y SPDT (Single Pole, Double Throw) SPST N.. (Single Pole, Single Throw, Normally losed) SPST N.O. (Single Pole, Single Throw, Normally Open) 3 Dimensions are shown: Inches (mm)

68 L Series Subminiature Precision Switches Features/Benefits ompact design Long life and high electrical capacity Quick connect, wire lead or P mounting Wide variety of actuator styles Typical pplications Motorized equipment Sump pump Thermostatic controls UL6058- Specifications ONTT RTING: From low level* to V. ELETRIL LIFE: 00,000 cycles INSULTION RESISTNE:,000 M οηµ min. DIELETRI STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 7ºF to 85ºF ( 5º to 85º). OPERTING FORE: From to 70 grams at actuator button. Forces are less at free end of lever actuators; (see OPERTING FORE and TUTOR option sections). MOUNTING: -56 screws, torque.3 in/lbs max. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service center. Materials SWITH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 9V-0). TUTOR BUTTON: Thermoplastic polyester (UL 9V-0). SPRING: opper alloy. PIVOT: opper alloy. MOVBLE ONTTS: Fine silver for ratings greater than 5 V. Fine silver with K gold plate for 5 V or less. STTIONRY ONTTS: Fine silver welded on copper alloy for ratings greater than 5 V. Gold alloy welded on copper alloy for ratings less than 5 V. TERMINLS: opper alloy. TERMINL SEL: Epoxy. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -33 through -35. For additional options not shown in catalog, consult ustomer Service enter. L Series L SP, Mom. Operating Force GG 5 oz./ grams GD 3.3 oz./9 grams GH 6 oz./70 grams Electrical Rating X UL (see chart) V6 UL (see chart) V7 UL (see chart) F5 UL 05 (see chart) L9 UL 05 (see chart) M UL 05 (see chart) ctuator P00 Pin plunger 0.8" lever roller, high force 5.5" lever roller, high force 0.39" lever roller, low force 5.6" lever roller, low force T0.9" lever, high force T3." simulated roller, high force T5.57" lever, high force T0.38" lever, low force T3.3" simulated roller, low force T5.67" lever, low force Terminations E Solder H.0" quick connect Wire lead L Left formed P thru-hole R Right formed P thru-hole S P Thru-hole ircuitry SPDT W SPST N.. Y SPST N.O. Electrical Life NONE 6,000 operations U* Extended 00,000 operations * Extended operations only available on Electrical Rating options F5, L9 and M 3 Seal NONE (STD.) No seal E Epoxy seal Dimensions are shown: Inch (mm)

69 L Series Subminiature Precision Switches L SUBMINITURE PREISION SNP-TING SWITHES SP MOMENTRY SERIES 0.97 (7,5) OPERTING FORE OPTION ODE GG GD GH BSI SWITH OPERTING FORES (OZ./GRMS) NOTE: Operating force varies with actuator option, see TUTOR option section ELETRIL RTING UL ONTT MTERIL OPTION ODE ELETRIL RTING MOVBLE ONTT STTIONRY ONTT RoHS OMPLINT* RoHS OMPTIBLE* X GP, 50 Vac, 50/60 Hz, 5E3, T85 R, 30 Vdc, E, T85 Fine silver with K gold plate Fine silver with K gold plate on copper base alloy Yes Yes V6 5() RM, 50 Vac, 50/60 Hz, E, T85 5 GP, 50 Vac, 50/60 Hz, E, T85 5R, 30 Vdc, E, T85 /3 HP, 5/50 Vac, 50/60 Hz, E, T85 Fine silver Fine silver welded on copper base alloy Yes Yes V7 0() RM, 50 Vac, 50/60 Hz, E, T85 0 GP, 50 Vac, 50/60 Hz, E, T85 0R, 30 Vdc, E, T85 /3 HP, 5/50 Vac, 50/60 Hz, E, T85 Fine silver Fine silver welded on copper base alloy Yes Yes UL 05 ONTT MTERIL OPTION ODE ELETRIL RTING MOVBLE ONTT STTIONRY ONTT RoHS OMPLINT* RoHS OMPTIBLE* F5, 5 V, 30 VD 00,000 cycles ( U option) Fine silver with K gold plate Fine silver with K gold plate on copper base alloy Yes Yes L9 5, /3 5 and 50 V 00,000 cycles ( U option) Fine silver Fine silver welded on copper base alloy Yes Yes M 0., /3 5 and 50 V 00,000 cycles ( U option) Fine silver Fine silver welded on copper base alloy Yes Yes * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. onsult ustomer Service enter for availability and delivery of nonstandard ratings. *Low Level = conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. 33 Dimensions are shown: Inches (mm)

70 L Series Subminiature Precision Switches TUTOR HIGH FORE OPTION ODE P00 FIG. DIM (7,6) DIM. B.330 ±.05 (8,38 ± 0,38) DIM. B B B (7,).570 ±.070 (,8 ±,78).9 dia. (,8Ø) 5 T0 T (5,5) 0.9 (7,) 0.0 (5,3).570 ±.75 (, ±,5).30 ±.070 (8,6 ±,78).55 ±.065 (,56 ±,65).9 dia. (,8Ø) FIG. Pin Plunger FIG. 3 Lever LOW FORE FIG. 5 Simulated Roller T0 T (9,9) 0.3 (8,).30 ±.0 (8,6 ± 3,56).55 ±.5 (,56 ± 3,8) B B B T (7,0).30 ±.09 (8,6 ±,70) (3,0) 0.38 (9,7).560 ±.090 (, ±,9).560 ±.35 (, ±,9).9 dia. (,8Ø).9 dia. (,8Ø) FIG. Lever Roller FIG. Lever FIG. 6 Simulated Roller T (,5).30 ±.00 (8,6 ±,5) BSI FORE FIG. 7 Lever Roller B SWITH HRTERISTIS OPTION ODE MXIMUM OPERTING FORE (OZ./GRMS) GG GD GH MINIMUM RELESE FORE (OZ./GRMS) GG GD GH MXIMUM DIFFERENTIL TRVEL LL FORES MXIMUM PRETRVEL LL FORES MINIMUM OVERTRVEL LL FORES (0,86).0 (3,56).09 (0,7) (,).80 (,57).037 (0,9) (,70).7 (6,9).053 (,53) (,8).35 (8,9).068 (,73) P (0,0).030 (0,76).00 (0,5) T (0,90).0 (3,56).09 (0,7) T (0,8).30 (3,30).06 (0,66) T (,70).76 (7,0).053 (,35) T (,57).5 (6,0).09 (,) T (,9).37 (9,5).07 (,83) T (,9).90 (,83).00 (,0) NOTE: For basic switch operating forces, see page Dimensions are shown: Inch (mm)

71 L Series Subminiature Precision Switches TERMINTIONS E SOLDER H.0" QUIK ONNET NOTE: Use mp Quick onnect Part No WIRE LED RTING WIRE SIZE L LEFT FORMED P THRU-HOLE MP WG P MOUNTING 5 MPS 0 WG 0. MPS 8 WG TERMINL OMMON NORMLLY OPEN WIRE OLOR BLK WHITE R RIGHT FORMED P TRU-HOLE NORMLLY LOSED RED P MOUNTING S P THRU-HOLE P MOUNTING 0.88 (7,3) IRUITRY W Y SPDT (Single Pole, Double Throw) SPST N.. (Single Pole, Single Throw, Normally losed) SPST N.O. (Single Pole, Single Throw, Normally Open) ELETRIL LIFE NONE 6,000 OPERTIONS U EXTENDED 00,000 OPERTIONS SEL NONE NO SEL E EPOXY SEL 35 EPOXY.075 MX. (,9) Dimensions are shown: mm

72 L Series Subminiature Switches Features/Benefits ompact design Long life and high electrical capacity Quick connect, solder terminals, P terminals Wide variety of actuator styles RoHS compatible Typical pplications Motorized equipment Sump pump Thermostatic controls UL6058- Specifications ONTT RTING: From low level to 0. 5/50 V ELETRIL LIFE: see chart below MEHNIL LIFE: 300,000 cycles. INSULTION RESISTNE: 00 M ohm min. DIELETRI STRENGTH:,500 Vrms sea level. OPERTING TEMPERTURE: 0º to +5º OPERTING FORE: 50 grams at actuator button MX. Forces are less at free end of lever actuators; (see TUTOR S option sections). MOUNTING: -56 screws, torque.3 in/lbs max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service center. Materials SWITH HOUSING: Thermoplastic polyester TUTOR BUTTON: Thermoplastic polyester. SPRING: opper alloy. PIVOT: opper alloy. MOVBLE ONTTS: Silver alloy STTIONRY ONTTS: Silver alloy TERMINLS: opper alloy. TUTOR LEVER: Stainless steel. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -36 thru -39. For additional options not shown in catalog, consult ustomer Service enter. L 5 0 Electrical Rating Series L SP, Mom. Operating Force grams Option ode S5 UL /50 V E 6 5/50 V E 0. 5/50 V E N UL /50 V E 6 5/50 V E 0. 5/50 V E 5 5/50 V E5 0. 5/50 V E 6 () 5/50 V E 0. 5/50 V E N ctuator P00 Pin plunger T05.8 mm short lever T mm lever T mm lever T.9 mm lever T6 5. mm lever T8 8. mm lever T 0. mm lever T3 3. mm lever T3 3.5 mm lever S mm simulated lever S09 9. mm simulated lever mm lever roller Terminations S Solder Q.0 Quick onnect P P Thru Hole L Left Form P R Right Form P ircuitry SPDT W SPST N.. Y SPST N.O. 36 Dimensions are shown: mm

73 L Series Subminiature Switches SERIES L ø.5 ø..0 R ELETRIL RTING RoHS OMPLINT * YES YES RoHS OMPTIBLE * OPTION ODE ELETRIL RTING YES 0 YES 06 0., 5/50 V 6, 5/50 V YES YES 0 0., 5/50 V YES YES S5 5, 5/50 V * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. OPERTING FORE OPTION ODE 50 OPERTING FORES (grams) 50 grams max. 37 Dimensions are shown: mm

74 L Series Subminiature Switches TUTOR 05 LEVER ROLLER SXX SIMULTED ROLLER B.9 3. B.05 D E D E TXX LEVER P00 B.05 D E D E TUTOR OPTION ODE B r ef. D E Diff. Motion mm mm mm mm mm mm max LENGTH OF LEVER Lever length for front mtg. hole to OP PRE TRVEL (MX) OPERTING POSITION FREE POSITION (MX) Oper. Force max. P00 N N ± T ± T ± T ± T ± T ± T ± T ± T ± T ± S ± S ± ± grams Release Force min. grams Over Travel min. 38 Dimensions are shown: mm

75 TERMINTIONS L Series Subminiature Switches S SOLDER Q QUIK ONNET ø ø P P THRU HOLE L LEFT FORM P R 7.05 RIGHT FORM P ,8 7,3 5,5 3X,50, OM NO N PLUNGER POSITION P MOUNTING IRUITRY W Y SPDT (Single Pole, Double Throw) SPST N.. (Single Pole, Single Throw, Normally losed) SPST N.O. (Single Pole, Single Throw, Normally Open) Dimensions are shown: mm 39

76 LS Series Subminiature Sealed Switches UL6058- Features/Benefits ompact design Long life and high electrical capacity Quick connect, solder terminals, P terminals, wire leads Wide variety of actuator styles RoHS compatible, RoHS compliant IP67 Typical pplications Motorized equipment Sump pump Thermostatic controls omputers ir conditioners Specifications ONTT RTING: from low level to 5 mp ELETRIL LIFE: 0,000 cycles INSULTION RESISTNE: 00 M ohm min. DIELETRI STRENGTH:,000 V OPERTING TEMPERTURE: -0º to +0º (without wire) -0º to +85º (with UL007 wire) -0º to +05º (with UL05 wire) -0º to +05º (with UL30 wire) -0º to +80º (with UL06 wire) -0º to +0º (with UL330 wire) OPERTING FORE: (see TUTOR S option sections). MOUNTING: -56 screws, torque.3 in/lbs max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service center. Materials SWITH HOUSING: Thermoplastic polyester or high temperature thermoplastic (PTS) (UL 9V-0). TUTOR BUTTON: Thermoplastic polyester. SPRING: opper alloy. PIVOT: opper alloy. MOVBLE ONTTS: Option 0 Gold plating over silver alloy Option 05 Silver alloy STTIONRY ONTTS: Option 0 Gold plating over silver alloy Option 05 Silver alloy TERMINLS: opper alloy. TUTOR LEVEL: Stainless steel. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -0 thru -3. For additional options not shown in catalog, consult ustomer Service enter. Series LS Electrical Rating L S Option ode 0 05 UL /50 V N 5 5/50 V 6 50 V Operating Force 03 grams ctuator P00 Pin plunger T00.9 mm short lever T05 7. mm short lever T07 9. mm short lever T3 5.5 mm lever T mm lever T8 0.7 mm lever T mm lever S6 8.6 mm simulated lever mm lever roller Terminations S Solder Q 0.0 Quick onnect P P Thru Hole W Wire leads potted Z Wire leads non-potted Wire Type WG 0 0 WG WG WG 6 6 WG Wire UL # (when required) UL007 B UL05 UL30 D UL06 ircuitry SPDT W SPST N.. Y SPST N.O. Wire Side (when required) Wire out the bottom B Wire out the right side Wire out the left side D None Dimensions are shown: mm 0

77 LS Series Subminiature Sealed Switches SERIES LS "" IRUITRY FP TYP.3±0. 3. TYP "W" IRUITRY TYP 9.5± X. ELETRIL RTING.8 TYP TYP "Y" IRUITRY RoHS OMPLINT * RoHS OMPTIBLE * OPTION ODE ELETRIL RTING YES YES 05 5 MP, 5/50 V YES YES 0 0. MP, 5/50 V OPERTING FORE OPTION ODE OPERTING FORES (grams) 03 g. max. Dimensions are shown: mm

78 LS Series Subminiature Sealed Switches TUTOR P00 T REF T REF 05. REF T00 T8 T REF S REF 0. REF REF 8.6 T05 T REF 5. REF E D B E D B E D E D TUTOR OPTION ODE B D E LENGTH OF LEVER OVER TRVEL (MIN) PRE TRVEL (MX) OPERTING POSITION FREE POSITION (MX) DIFFERENTIL MOTION (MX) OPERTING FORE (MX) RELESE FORE (MIN) P00 N/ T T T T T T T S Dimensions are shown: mm

79 LS Series Subminiature Sealed Switches TERMINTIONS S SOLDER Q QUIK ONNET.8mm / "" IRUITRY TYP P 7.5±0. TYP 5 P THRU HOLE 9.5± FP.35.3±0..6 ± 0. X..8 TYP TYP 3. TYP "W" IRUITRY "Y" IRUITRY Z or W TYP WIRE ORIENTTION 9.3 TYP. TYP ± 0. TYP 3X.35/.5 6. TYP 0.6 TYP 0.5 ± 0.05 TYP POTTING "W' OPTION SHOWN 3± 30.8 ± 6. Z or W (6.) Z or W 5±0. REOMENDED MOUNTING PTTERN B WIRE ORIENTTION Y OR W IRUITRY BLK OM BLUE NO 3± 0. B WIRE ORIENTTION IRUITRY 7.5 ±0.TYP.3 (8.5) POTTING "W' OPTION SHOWN Z or W (8.5) POTTING "W' OPTION SHOWN Z or W : GRY NO: BLUE WIRE ORIENTTION Y OR W IRUITRY.3 WIRE ORIENTTION IRUITRY N: BLK BLK OM BLUE NO 3± ±0. (6.) BLK OM GRY N BLUE NO (.3) (.3) BLK OM BLUE NO GRY N 3± (6.) POTTING.3 "W' OPTION ± 0. SHOWN POTTING "W' OPTION SHOWN.3 ±. 3± (6.) IRUITRY W Y SPDT (Single Pole, Double Throw) SPST N.. (Single Pole, Single Throw, Normally losed) SPST N.O. (Single Pole, Single Throw, Normally Open) 3 Dimensions are shown: mm

80 MM Series Subminiature Precision Switches Features/Benefits Low level and power switching Long electrical and mechanical life Increased overtravel Reliable snap-acting mechanism Typical pplications Limited space constraints ommunication devices Specifications ONTT RTING: From low level* to 7 50 V. ELETRIL LIFE: 00,000 cycles at full rated load. INSULTION RESISTNE:,000 ohm min. DIELETRI STRENGTH:,000 V RMS sea level. OPERTING TEMPERTURE: 67 F to 75 F ( 55 to 35 ). OPERTING FORE: 5 oz. ( grams) max. at actuator button. MOUNTING: -56 screws, torque in/lbs max. *Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service center. Materials SWITH HOUSING: Heat resistant phenolic (UL 9V-0). TUTOR BUTTON: Heat resistant phenolic (UL 9V-0). SPRING: Beryllium copper D alloy 700. PIVOT: Brass D alloy 60. MOVBLE ONTTS: Fine silver for ratings greater than 5 V. K gold for 5 V or less. STTIONRY ONTTS: Fine silver inlay on copper D alloy 000 for ratings greater than 5 V. K gold on copper D alloy 000 for 5 V or less. TERMINLS: opper D alloy Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages - through -9. For additional options not shown in catalog, consult ustomer Service enter. Series MM SP, Mom. Operating Force GG 5 oz./ grams Electrical Rating D 7 5, 50 V 7 8 VD resistance 8 VD inductive.5 8 VD (lamp) F5, 5 V, 30 V D M M G G ctuator P0 D0 L0 L W0 W Pin plunger Plunger, high overtravel Leaf Leaf, high force, low motion Leaf roller Leaf roller, high force, low motion Terminations L R T Single turret solder Left formed P thru-hole Right formed P thru-hole P thru-hole,.035 Dimensions are shown: Inch (mm)

81 MM Series Subminiature Precision Switches SWITH WITH STNDRD OPTIONS MMGGDP0 PRT NUMBER MMGGDP0 BSI OPERTING FORE (OZ./GRMS) 5 ELETRIL RTING 7 50 V. SERIES OPERTING FORE MM SPDT MOMENTRY OPTION ODE GG BSI SWITH OPERTING FORE 5 oz. ( grams) maximum for basic switch with pin plunger actuator ( P0 actuator option). ELETRIL RTING NOTE: Operating force varies with actuator option, see TUTOR option section. ONTT MTERIL OPTION ODE RoHS OMPLINT* RoHS OMPTIBLE* MOVBLE ONTT STTIONRY ONTT ELETRIL RTING D Yes Yes Fine silver. Fine silver inlay on copper alloy. 7 5, 50 V ; 7 8 VD resistance 8 VD inductive;.5 8 VD (lamp) F5 Yes Yes K Gold. K Gold on copper alloy. From low level* to 5 V, 30 V D. Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. ll models with all options. onsult ustomer Service enter for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. TUTOR OPTION ODE FIG. DIM. DIM. B DIM. P0 D0 FIG. Pin Plunger FIG. Leaf FIG. 3 Plunger L0 L W0 W FIG. Leaf Roller FIG. 5 Leaf FIG. 6 Leaf Roller 5 Dimensions are shown: Inches (mm)

82 MM Series Subminiature Precision Switches TUTOR SWITH HRTERISTIS OPTION ODE MXIMUM OPERTING FORE (OZ./GRMS) MINIMUM RELESE FORE (OZ./GRMS) MXIMUM DIFFERENTIL TRVEL MXIMUM PRETRVEL MINIMUM OVERTRVEL NOTE: For basic switch operating forces, see page -. TERMINTIONS SINGLE TURRET SOLDER L LEFT FORMED P THRU-HOLE P MOUNTING T P THRU-HOLE,.035 R RIGHT FORMED P THRU-HOLE P MOUNTING P MOUNTING 6 Dimensions are shown: Inch (mm)

83 ZM Series Subminiature Switches Features/Benefits Reliable snap-acting mechanism Long electrical and mechanical life ompact sizeideal when space is limited Various PB terminals and actuators RoHS compliant / compatible Typical pplications PB detection switch ommunication devices Testing equipment Security/larm systems onsumer electronics UL6058- Specifications ONTT RTING: F7: 5 V M9: 60 VD. ELETRIL LIFE: 0,000 3 INSULTION RESISTNE: 00 M ohm min. DIELETRI STRENGTH: 000 Vrms. OPERTING TEMPERTURE: 30º to 85º. OPERTING FORE: : 50 grams, H: 90 grams. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. Materials OVER: Nylon 6/6 TUTOR BUTTON: Nylon 6/6 SE: Nylon 6/6 SPRING: SUS MOVBLE BLDE: Beu MOVBLE ONTT: Silver alloy (M9 option gold plated) FIXED ONTTS: Silver alloy (M9 option gold plated) FIXED TERMINLS: Brass - g plated. TUTOR (Leaf / Roller options): SUS NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -8 and -9. For additional options not shown in catalog, consult ustomer Service enter. Series ZM SP, Mom. Operating Force 50 grams H 90 grams Electrical Rating see chart below ctuator P0 Pin plunger L0 Leaf L3 Leaf T3 Simulated roller T3 Simulated roller Terminations T P Thru-hole L Left-footed, P Thru-hole R Right-footed, P Thru-hole K P Thru-hole with retention feature Option ode F7 M9 UL V 0. 8 V D V D 0. 5 V UL V 3 30 V D 0. 8 V D V D 0. 5 V 3 5 V 0. 8 V D V D 0. 5 V 7 Dimensions are shown: Inches (mm)

84 ZM Series Subminiature Switches SERIES Z M ZM SUBMINITURE SNP-TING SWITHES SP MOMENTRY 0.0 (,).60 (6,6).08 (,05) FREE POS. OPER. POS..0 (0,6) NO ø.079 (ø,05) N ZMF7L0T SPDT P MOUNTING OPERTING FORE OPTION ODE MOUNTING SREWS SIZE -6 BSI SWITH OPERTING FORE (OZ./GRMS) H ELETRIL RTING ONTT MTERIL OPTION ODE RoHS OMPLINT* RoHS OMPTIBLE* MOVBLE ONTT STTIONRY ONTT ELETRIL RTING F7 Yes Yes Silver alloy see chart M9 Yes Yes Gold plating or silver alloy see chart * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. ll models with all options. onsult ustomer Service center for availability and delivery of nonstandard ratings. Option ode F7 M9 UL V 0. 8 V D V D 0. 5 V UL V 3 30 V D 0. 8 V D V D 0. 5 V 3 5 V 0. 8 V D V D 0. 5 V 8 Dimensions are shown: Inch (mm)

85 ZM Series Subminiature Switches TUTOR P0 PIN PLUNGER L0 L3 LEF, 50 GRMS ( ONLY) LEF, 30 GRMS (H ONLY) T3 T3 SIMULTED ROLLER, 0 GRMS ( ONLY) SIMULTED ROLLER, 5 GRMS (H ONLY) FP OP OP FP OP FP TUTOR OPTION ODE (mm) LENGTH OF LEVER B Ref (mm) LEVER LENGTH MTG. HOLE TO OP (mm) PRE- TRVEL MX D (mm) OPERTING POSITION E (mm) FREE POSITION MX DIFF. MOTION mm MX OPER. FORE grams MX H RELESED FORE Grams MX OVER TRVEL MIN P0 PIN PLUNGER N N L0 LEF L3 LEF T3 SIMULTED ROLLER T3 SIMULTED ROLLER T (STD.) P THRU-HOLE TERMINTIONS K P THRU-HOLE WITH RETENTION FETURE.38 (3,5).0 (0,) TYP..035 (0,9).03 (.0).0 (0.) L LEFT FOOTED, P THRU-HOLE R RIGHT FOOTED, P THRU-HOLE.07 (,8).07 (,8).035 TYP. (0,9). (3,).035 TYP. (0,9). (3,) 9 Dimensions are shown: Inches (mm)

86 ZM Series Subminiature Switches Features/Benefits Reliable snap-acting mechanism Long electrical and mechanical life ompact sizeideal when space is limited Various PB terminals and actuators RoHS compatible & compliant Typical pplications PB detection switch ommunication devices Testing equipment Security/larm systems onsumer electronics UL6058- Specifications ONTT RTING: 5 V V / 50 V V D 5 V 60 V D ELETRIL LIFE: 300, / 0, MEHNIL LIFE:,000,000 cycles. INSULTION RESISTNE: 00 M ohm min. DIELETRI STRENGTH: 500 Vrms. OPERTING TEMPERTURE: 0º to 85º OPERTING FORE: 80 or 50 grams. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. Materials SE/OVER: PBT TUTOR: Button nylon 6/6 MOVBLE ONTTS: Silver alloy or gold plated STTIONRY ONTTS: Silver alloy or gold plated TERMINLS: Brass, silver plated. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -5 and -53. For additional options not shown in catalog, consult ustomer Service enter. Z M Series ZM SP, Mom. Electrical Rating See charts below Silver ontacts Option UL UL ode V D V D 0. 5 V 0. 5 V 0. 5 V V 3 5 V 3 V D 3 5 V 0 V D 5 / 50 V Operating Force oz. / 50 grams oz. / 80 grams ctuator P00 Pin plunger S03 Simulated roller 5.8mm L30 Lever 0.5mm L Lever 7.mm L08 Lever 3.95mm 03 Roller.3mm L0 Lever 3.9mm S06 Simulated roller.03mm S07 Simulated roller 0.75mm V D 5 / 50 V Terminations P P Thru-hole L Left-footed, P Thru-hole R Right-footed, P Thru-hole E Solder K P Thru-hole with rentention feature SPDT Gold Plated ontacts Option UL ode V D G V G03 G0 3 5 V UL V D 0. 5 V 3 5 V 3 V D V D 5 / 50 V 0. 5 V 3 5 V V D 5 / 50 V 50 Dimensions are shown: Inch (mm)

87 ZM Series Subminiature Switches SERIES Z M ZM SUBMINITURE SNP-TING SWITHES SP MOMENTRY 0.0 (,).60 (6,6).08 (,05) FREE POS. OPER. POS..0 (0,6) N ZM0350L0P SPDT NO ø.079 (ø,05) P MOUNTING MOUNTING SREWS SIZE -6 Silver ontacts Option UL UL ode V D V D 0. 5 V 0. 5 V 0. 5 V V 3 5 V 3 V D 3 5 V 0 V D 5 / 50 V ELETRIL RTING V D 5 / 50 V Gold Plated ontacts Option ode G00 G03 G0 UL V D 0. 5 V 3 5 V UL V D 0. 5 V 3 5 V 3 V D V D 5 / 50 V 0. 5 V 3 5 V V D 5 / 50 V * Note: See Technical Data in section N of this catalog for RoHS compliant and compatible definition and specifications. ll models with all options. onsult ustomer Service center for availability and delivery of nonstandard ratings. OPERTING FORE OPTION ODE 50 BSI SWITH OPERTING FORE (OZ./GRMS) Third ngle Projection Dimensions are shown: Inches (mm) 5

88 ZM Series Subminiature Switches TUTOR P00 PIN PLUNGER L08 LEVER 3.95MM E 'B' '' 'B' '' S03 SIMULTED ROLLER 5.8MM E 03 ROLLER.3MM E 'B' '' 'B' '' L30 LEVER 0.5MM E '' 'B' L0 LEVER 3.9MM E 'B' '' L LEVER 7.MM E S06 SIMULTED ROLLER.03MM E 'B' '' 'B' '' S07 SIMULTED ROLLER 0.75MM E 'B' '' 5 Dimensions are shown: Inch (mm)

89 ZM Series Subminiature Switches SWITH HRTERISTIS ODE OPER. FORE MX. (GRMS) REL. FORE MIN. (GRMS) '' FP MX. (MM) 'B' OP MX. (MM) '' PT MX. (MM) 'D' OT MIN. (MM) P ± 'E' MIN. (MM) S ± L30 (80gf) ± L30 (50 gf) ± L ± L ± ± L ± S ± S ± E 'D' '' 'B' '' TERMINTIONS P P THRU-HOLE L LEFT FOOTED, P THRU-HOLE.38 (3,5).0 (0,) TYP..035 (0,9).035 TYP. (0,9).07 (,8). (3,) R RIGHT FOOTED, P THRU-HOLE E SOLDER.07 (,8) OM N.O. N (,85).38 (3,5).035 TYP. (0,9). (3,).05 (,3).00 (5,08).086 (,).00 (,).00 (5,08).035 (0,6) K P THRU-HOLE WITH RETENTION FETURE.03 (.0).0 (0.) Third ngle Projection Dimensions are shown: Inches (mm) 53

90 ZMB Series Subminiature Switches Features/Benefits ompact design Various operating forces Different lever options PB or solder terminal options Detect interlock and movement Typical pplications onsumer electronics ommunications Industrial meters Security systems Office equipment Specifications ONTT RRNGEMENT: SPDT ONTT RTING: 30 V D INITIL ONTT RESISTNE: 50 mω max. INSULTION RESISTNE: 00 M Ω 500 VD DIELETRI STRENGTH: 000 V (50-60 Hz) MEHNIL LIFE: 500,000 cycles ELETRIL LIFE: 50,000 cycles PRE-TRVEL: 0.5 mm max. OVER-TRVEL: 0.5 mm min. OPERTING TEMPERTURE: -0º to + 70º Materials OVER / HOUSING: PBT (black) KNOB: PBT (red) ONTT: opper alloy, silver plated TERMINLS: opper alloy, silver plated LEVER: Stainless steel NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -55 and -56. For additional options not shown in catalog, consult ustomer Service enter. Z M B 0 0 Series ZMB SP, Mom. Electrical Rating V D Operating Force ± 0 grams 5 5 ± 5 grams ctuator P00 Pin plunger L0 Straight lever.5 mm L0 Straight lever 3.3 mm S0 Simulated roller 7.5 mm Terminations P P Thru-hole S Solder ircuitry SPDT 5 Dimensions are shown: Inch (mm)

91 ZMB0070P00P PIN PLUNGER, P THRU-HOLE.8 ZMB Series Subminiature Switches OPERTING FORE: 70 ± 0 gf OPERTING POSITION (OP): 5.5 ± 0.30 mm FREE POSITION (FP): N/ 5.8 Ø X. 5 P - T 6.5 O.P. P.T Ø.0 TYP.3 OMMON N.O N. 3.5 TERMINL TERMINL TERMINL OM N.O N. SHEMTI PIERING PLN ZMB005L0P STRIGHT LEVER.5 MM, P THRU-HOLE.8 OPERTING FORE: 5 ± 5 gf OPERTING POSITION (OP): 7. ± 0.8 mm FREE POSITION (FP): 0 mm max Ø X Ø O.P. F.P P - T Ø.0 TYP OMMON N.O N. OM N.O N. TERMINL TERMINL TERMINL SHEMTI PIERING PLN ZMB005L0P STRIGHT LEVER 3.3 MM, P THRU-HOLE.8 OPERTING FORE: 5 ± 5 gf OPERTING POSITION (OP): 6.0 ± 0.8 mm FREE POSITION (FP): 8.5 mm max Ø X P - T Ø.0 TYP O.P. F.P. OM N.O N. OMMON TERMINL N.O TERMINL N. TERMINL SHEMTI PIERING PLN Dimensions are shown: Inches (mm) 55

92 .8 ZMB Series Subminiature Switches ZMB0070P00S PIN PLUNGER, SOLDER.8 OPERTING FORE: 70 ± 0 gf OPERTING POSITION (OP): 7.0 ± 0.30 mm FREE POSITION (FP): N/ Ø X. 5 O.P. P.T..8 P - T Ø 0.6 OMMON N.O N. OM N.O N. TERMINL TERMINL TERMINL SHEMTI PIERING PLN.8.8 ZMB005L0S STRIGHT LEVER 3.3 MM, SOLDER.8 OPERTING FORE: 5 ± 5 gf OPERTING POSITION (OP): 7.5 ± 0.8 mm FREE POSITION (FP): 0 mm max. 6.5 Ø X P.T. O.P P - T ZMB005S0S SIMULTED ROLLER 7.5 MM, SOLDER.8 OPERTING FORE: 5 ± 5 gf OPERTING POSITION (OP): 8.5 ± 0.8 mm FREE POSITION (FP): 9.5 mm max R ØX. P - T Ø 0.6 OM N.O N. OMMON TERMINL N.O TERMINL PIERING PLN N. TERMINL 7 O.P. (0) F.P Ø 0.6 OM N.O N. SHEMTI OMMON TERMINL N.O TERMINL PIERING PLN N. TERMINL.8.8 Dimensions are shown: Inch (mm) 56

93 ZMS Series Subminiature Switches (IP65) Features/Benefits Reliable snap-acting mechanism Long electrical and mechanical life ompact sizeideal when space is limited Various PB terminals and actuators RoHS compatible IP67 with potted wires only Typical pplications PB detection switch ommunication devices Testing equipment Security/larm systems onsumer electronics Specifications ONTT RTING: 5 V / 3@ V D, V D ELETRIL LIFE: 00, V D 00,000 3 V D 6, V MEHNIL LIFE: 500,000 cycles INSULTION RESISTNE: 00 M ohm min. DIELETRI STRENGTH: 500 Vrms. OPERTING TEMPERTURE: OPERTING FORE: 30 grams. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. UL6058- UL05 Materials SE: Nylon OVER/TUTOR: PBT MOVBLE ONTTS: 3 mp silver alloy, 0.0 gold plating over silver alloy STTIONRY ONTTS: 3 mp silver alloy, 0.0 gold plating over silver alloy TERMINLS: Brass, silver plated LEVER: Stainless steel NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -58 through -60. For additional options not shown in catalog, consult ustomer Service enter. Z M S Series ZMS SP, Mom. Over Travel H High Travel L Low Travel Electrical Rating 00 V D V 3 V D Operating Force grams /.59 ctuator P00 Pin plunger T0.5 lever T.8 simulated roller * Standard Wire: 0 WG UL 007 Terminations P P Thru-hole L Left form, P Thru-hole R Right form, P Thru-hole S Solder type Wire leads out bottom * K Wire leads out right side * W Wire leads out left side * Mounting Styles S Std (No support post) L Support post left R Support post right ircuitry SPDT W SPST N.. Y SPST N.O. 57 Dimensions are shown: Inches (mm)

94 ZMS Series Subminiature Switches (IP65) SERIES Z M S ZMSH HIGH OVER TRVEL Switch option shown: ZMSH00P00SS,7 (.579 ), (.80 ) PT ø (.079 ),7 (.067 ) 7,5 8, (.95 ) (.39 ) OP FP ZMSL LOW OVER TRVEL Switch option shown: ZMSL00P00PS,3 (.63 ) N NO OM,5 (.0 ),7 (.579 ), (.80 ) 0,5 (.00 ),8 (.0 ),3 (.6 ) 5, PT Ø (.079 ) (.3 ) 9,05 7,5 (.356 ) (.95 ) OP FP 5,08 (.00 ) N NO OM ELETRIL RTING 0,6 ±0, (.0 ±.003 ) 5,08 (.00 ),5 (.098 ) ONTT MTERIL UL6058- OPTION ODE MOVBLE ONTT / STTIONRY ONTT UL05 ELETRIL RTING ENE 0,5 ±0,05 (.00 ±.00 ),8 (.0 ) 5, (.3 ) ELETRIL RTING 00 Gold plating over silver alloy 0.0 V D 0. V D 0m V D 5E5 03 Silver alloy 3 5 V 3 V D 3 V D E5 onsult ustomer Service center for availability and delivery of nonstandard ratings. OPERTING FORE OPTION ODE BSI SWITH OPERTING FORE (OZ./GRMS) Third ngle Projection Dimensions are shown: Inch (mm)

95 ZMS Series Subminiature Switches (IP65) TUTOR P00 PIN PLUNGER (IP65) T0.5 LEVER (IP65) T LEVER (IP65),7 (.579 ), (.80 ) PT,7 (.579 ), (.80 ) PT PT 8,6 (.733 ),7 (.5787 ), (.803 ) OP FP OP FP FP OP 9,05 (.3563) approved SWITH HRTERISTIS ctuator code Maximum Operate Force (grams/oz.) Minimum Release Force (grams/oz.) P T0 T Free Position Max.7 ().60 (5.35).76 (8.5) Maximum Pre-travel 0.03 (0,8) 0.5 (3.85) 0.86 (.8) Operate Position.5 ±.0 (0.55 ±.3).0 ±.00 (. ±.5).539 ±.03 (3.7 ±.8) Maximum Differential P00 PIN PLUNGER (IP67) T0.5 LEVER (IP67) T.8 LEVER (IP67),7 (.579 ), (.80 ) PT,7 (.579 ), (.80 ) PT PT.0 (0.3) 0.00 (0,5) (0,7) Low Overtravel min. (L) 0.03 (0,8) (,35) 0.06 (,65) 8,6 (.733 ),7 (.5787 ), (.803 ) High Overtravel min. (H) (,7) 0.08 (,) 0.0 (,57) OP FP OP FP FP OP Gray N Blue (NO) Black (OM) SWITH HRTERISTIS TERMINTION ONLY ctuator code Maximum Operate Force (grams/oz.) Minimum Release Force (grams/oz.) P Free Position Max.650 (6.50) Maximum Pre-travel 0.03 (0,8) Operate Position.593 ±.00 (5.05 ± 0.5) Maximum Differential.0 (0.3) Low Overtravel min. (L) 0.03 (0.8) High Overtravel min. (H) (,7) T (9.85) 0.5 (3.85).68 ±.08 (5.7 ±.7) 0.00 (0.5) (.35) 0.08 (,) T (.95) 0.88 (.8).77 ±.039 (8. ±.0) (0.7) 0.06 (.65) 0.0 (,57) 59 Dimensions are shown: mm (inch)

96 ZMS Series Subminiature Switches (IP65) TERMINTIONS P P THRU-HOLE L LEFT FOOTED, P THRU-HOLE 5.85 (0.30) P MOUNT ().5 holes (.098) 9.53 (.375) 0.3 (.00) R S 5,08 (.00) RIGHT FOOTED, P THRU-HOLE 0,5 (.00),8 (.0) 5, (.3 ) 5,08 (.00) 5,08 (.00) SOLDER TYPE 0,6± 0, (.0±.003) 5,08 (.00) P MOUNTING HOLE 5 (.97),05 (.08) To center of terminal,85 (.),5 (.098),35/,50 (.053) (.059) 5.85 (0.30) P MOUNT ().5 holes (.098) 0.6 (.00) (3).35 to.50 holes (.053) to (.059) 0,5±0,05 (.00±.00),8 (.0) 9.53 (.375) 0.3 (.00) 5.08 (.00) To center,05 of terminal (.08 ),85 (. ) WIRE LEDS BOTTOM (IP67) W.0 (7) 30.8 (.00) Black Blue Grey 3.7 (OM) (NO) (N) (.5) Strip Ends LEFT SIDE (IP67) 0,5 0,6 (.097) 0.6 (.036),8 (.00 ) 5,08 5,08 (.0 ) (.000 ) (.000 ) (3).35 to.50 holes (.053) to (.059) 30,8 (.00) K (.7) RIGHT SIDE (IP67) BLK (OM) GREY (N) 30,8 (.00) BLUE (NO) 5.08 (.00) GREY (N) 3.7 (0.5) STRIP ENDS Standard Wire: 0 WG UL 007,7 (.067 ),3 (.63 ),5 (.098 ),3 (.63 ) 0,5 (.097 ),8 (.0 ) 3,7 (0.5) STRIP ENDS BLK (OM) BLUE (NO) (.7) MOUNTING STYLES S STD (NO SUPPORT POST) L SUPPORT POST LEFT R SUPPORT POST RIGHT X 5 (.97 ) 5 (.97 ).60 (.0) ø.60 (,0) IRUITRY W Y SPDT (Single Pole, Double Throw) SPST, N (Single Pole, Single Throw, Normally losed) SPST, NO (Single Pole, Single Throw, Normally Open) Third ngle Projection Dimensions are shown: mm (inch) 60

97 ZMSM Series with Mounting Hole Subminiature Switches (IP65) Features/Benefits Reliable snap-acting mechanism Long electrical and mechanical life Various PB terminals and actuators RoHS compatible IP67 with potted wires only Typical pplications ommunication devices Testing equipment Security/larm systems Specifications ONTT RTING: 5 V / 3@ V D, V D. ELETRIL LIFE: 00, , V D / 00,000 3, V D, 6,000 3, 5 V INSULTION RESISTNE: 00 M ohm min. DIELETRI STRENGTH: 500 Vrms. OPERTING TEMPERTURE: see chart below. OPERTING FORE: 30 grams. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. UL6058- Materials SE: Nylon OVER/TUTOR: PBT MOVBLE ONTTS: 3 mp silver, 0.0 gold STTIONRY ONTTS: 3 mp silver, 0.0 gold TERMINLS: Brass, Pre-plated with silver LEVER: Stainless steel NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -6 through -6. For additional options not shown in catalog, consult ustomer Service enter. Z M S M Series ZMSM SP, Mom. Over Travel H High Travel L Low Travel Electrical Rating 0 V D V 3 V D Operating Force grams /.59 ctuator P00 Pin plunger T0.5 lever T.8 simulated roller Terminations P P Thru-hole S Solder type Wire leads 0 WG UL 007 K Wire leads WG UL30 W Wire leads WG UL06 N Wire leads 6 WG UL330 ircuitry Mounting Styles SPDT M No support post W SPST N.. L Two support post left Y SPST N.O. R Two support post right T One support post left and right 6 Dimensions are shown: mm

98 ZMSM Series with Mounting Hole Subminiature Switches (IP65) SERIES ZMSMH HIGH OVER TRVEL ±0.5 PT OP FP ZMSML LOW OVER TRVEL MODEL SHOWN: ZMSMHXXXXP00PL ±0.5 PT OP FP MODEL SHOWN: ZMSMLXXXXP00PL ELETRIL RTING ONTT MTERIL OPTION ODE RoHS OMPLINT* RoHS OMPTIBLE* MOVBLE ONTT STTIONRY ONTT ELETRIL RTING 0 Yes Yes Gold alloy V D 3 Yes Yes Silver alloy 3 5 V 3 V D Model with option S (solder type) only. onsult ustomer Service center for availability and delivery of nonstandard ratings. OPERTING FORE OPTION ODE BSI SWITH OPERTING FORE (OZ./GRMS) Dimensions are shown: mm

99 ZMSM Series with Mounting Hole Subminiature Switches (IP65) TUTOR P00 PIN PLUNGER (IP65) T0.5 LEVER (IP65) T LEVER (IP65).7 REF PT 8.7 REF PT.75 PT OP FP OT OP FP OT OP FP SLE MODEL SHOWN: ZMSMLXXXXP00PL MODEL SHOWN: ZMSMLXXXXT0PL SWITH HRTERISTIS MODEL SHOWN: ZMSMLXXXXTPL ctuator code Maximum Operate Force (grams/oz.) Minimum Release Force (grams/oz.) Free Position Max (mm) Maximum Pre-travel (mm) Operate Position (mm) Maximum Differential (mm) Low Overtravel min. (mm) High Overtravel min. (mm) P ± T0 T ± ± TERMINTIONS P P THRU-HOLE (IP65) S SOLDER TYPE (IP65) ± TYP 0.5 TYP MODEL SHOWN: ZMSMHXXXXP00PL MODEL SHOWN: ZMSMHXXXXP00SM 3 ø, ±.7 (.08 ±.005) 5,08 (.00) 5,08 (.00) P MOUNTING HOLE WIRE LEDS BOTTOM (IP67) Standard Wire: 0 WG UL 007 REF vailable options - must specify WG UL30 WG UL06 6WG UL330 GRY N.. BLUE N.O. N NO OM BLK OM 3 305±.5 63 Dimensions are shown: mm

100 ZMSM Series with Mounting Hole Subminiature Switches (IP65) MOUNTING STYLES M NO SUPPORT POSTS L TWO SUPPORT POSTS LEFT R TWO SUPPORT POSTS RIGHT T ONE SUPPORT POST LEFT & RIGHT 5 TYP 9.53 TYP.6 TYP. TYP MODEL SHOWN: ZMSMHXXXXP00PM POSTS LEFT POSTS RIGHT LEFT & RIGHT MODEL SHOWN: ZMSMHXXXXP00PL MODEL SHOWN: ZMSMHXXXXP00PR MODEL SHOWN: ZMSMHXXXXP00PT W Y SPDT (Single Pole, Double Throw) SPST, N (Single Pole, Single Throw, Normally losed) SPST, NO (Single Pole, Single Throw, Normally Open) IRUITRY Third ngle Projection 6 Dimensions are shown: mm

101 MDS Series Micro Detect Switches Features/Benefits tactile feel Small package size vailable in vertical or right angle PB mount RoHS compliant and compatible Typical pplications Detect the presence of a mechanical device Medical devices onsumer electronic devices T applications Specifications ONTT RTING: 30 VD. MEHNIL & ELETRIL LIFE: 30,000 operations. ONTT RESISTNE: 00 m Ω max. inital OPERTING TEMPERTURE: 5º to +70º. SOLDERBILITY: ccording to lead free solder profiles. PKGING: vailable in bulk or tape and reel. OPERTING FORE: 50g Max. RELESE FORE: 3g Min. Materials BSE: P9T OVER & TUTOR: P9T MOVBLE ONTT: opper alloy, silver plated. STTIONRY ONTTS: opper alloy, silver plated. TERMINLS: opper alloy, silver plated. NOTE: MDS series is RoHS compliant, and compatible. See technical data section of this catalog for RoHS compliant and compatible definitions and specifications. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -66 through -70. For additional options not shown in catalog, consult ustomer Service enter. M D S Series MDS SPDT Operating Force grams Electrical Rating VD ctuator L0 Standard lever L03 Higher OP lever Termination Style PS P Thru-hole, Short PL P Thru-hole, Long RS P Thru-hole, Short, Right bend RL P Thru-hole, Long, Right bend LS P Thru-hole, Short, Left bend LL P Thru-hole, Long, Left bend SL SMT, Left SR SMT, Right L SMT, Left bracket with pins R SMT, Right bracket with pins BL SMT, Left bracket no pins BR SMT, Right bracket no pins 65 Dimensions are shown: mm

102 MDS Series Micro Detect Switches SERIES M D S,,3 7 L0 LEVER 0 7 R0,6 "",6 7 L03 LEVER N (OMMON) 3 NO SHEMTI SPDT REOMMENDED DIRETION OF M ENGGEMENT "D" "" "B" OPERTING HRTERISTIS LEVER L0 LEVER L03 8,,6 X,6,7 OPERTING POSITION DIM '' /-0.5 FREE POSITION DIM 'B' 8 MX 8.5 MX PRETRVEL DIM '',8 MX.8 MX OVER TRVEL DIM 'D' 0.3 MIN 0.3 MIN ONTT RTING 30 VD 30VD OPERTING FORE 50 GRMS F. MX 50 GRMS F. MX OPERTING FORE OPTION ODE 65 OPERTING FORE 50 grams max. ELETRIL RTING OPTION ODE ELETRIL RTING V D TUTOR L0 STNDRD LEVER L03 HIGHER OP LEVER, 7, 7,3 L0 LEVER,6 L03 LEVER Third ngle Projection Dimensions are shown: mm 66

103 TERMINTIONS MDS Series Micro Detect Switches PB Mounting Pattern,5 0,08 TYP,5±0,08,5±0,08 PB MOUNTING PS P THRU-HOLE, SHORT STRIGHT PL P THRU-HOLE, LONG STRIGHT 3X,5,86 3X,5 OM NO N 3X 3, 3X,86 3X 5,3 OM NO N,3 0,5 TYP X,5 TYP 3X 0,5,3 0,5 TYP 0,8 TYP,5 TYP 3X 0,5 RS P THRU-HOLE, SHORT RIGHT BEND RL P THRU-HOLE, LONG SHORT BEND 3X,5 3X,5 OM NO N,5 TYP 3X 3, 0,38 3X 0,5 3X 0,5 OM NO N 3X,5,3 TYP 0,8 TYP,5 TYP 3X,5 0,38,5,3 TYP 0,8 TYP,36 LS P THRU-HOLE, SHORT LEFT BEND LL P THRU-HOLE, LONG LEFT BEND 3X,5 3X,5 0, 3X 0,5 0, N NO OM 3X,5 0, 3X 0,5,3 TYP 0,8 TYP,5 TYP 3X 3, 0,38 N NO OM,36,5,3 TYP 0,8 TYP,5 TYP 3X 0,38 67 Dimensions are shown: mm

104 MDS Series Micro Detect Switches TERMINTIONS SL SMT, LEFT MOUNT SR SMT, RIGHT MOUNT 3X,7 3X,5 3X 0, 3X,7 3X 0, 3X,5,3 TYP 3X 0,8,5 3X 0,5 3X,7,3 TYP 3X 0,8,5 TYP 3X 0,5 3X,7 SMT Mounting Pattern SMT Mounting Pattern (,8) TYP (,5) TYP (,8) TYP (,5) TYP (,5) TYP (,5) TYP L SMT, LEFT BRKET WITH PINS,63 0 X,78 TYP 8,7 TO ENTER OF POSTS 9, 0,5 5,7 OPERTING POS. FROM ENTER OF POST 3,08 X 0,85 0,5 3,3 X,05 X,66 8, 3X,7 8, 3X,3 3X 0,8 TYP,5 TYP X 0,76 0,05 3X 0,5 3X,7 X 0,9 0,05 HOLE X,8,5 8,7 3X,5,5,6 R SMT, RIGHT BRKET WITH PINS 0,63 8,7 TO ENTER OF POSTS 0,5 9, X,78 TYP 3,08 X 0,85 0,5 X,66 5,7 OPERTING POS. FROM ENTER OF POST 3,3 X,05 8,,7 8, 3X,3 3X 0,8,5 TYP X 0,76 0,05 3X 0,5 3X,7 X 0,9 0,05 HOLE X,8,5 8,7 3X,5,5,6 68 Dimensions are shown: mm

105 TERMINTIONS MDS Series Micro Detect Switches BL SMT, LEFT BRKET NO PINS X 0,65 0,5 9, 3,08 3,5 OPERTING POS. TO ENTER OF SMT PD X,33 X,05 X,66 OF PDS 8, 3X,7 8, 3X,8 6,6,3 TYP 0,8 TYP,5 TYP 3X 0,5 TYP 3X,7 TYP,5,5 3X,5 BR SMT, RIGHT BRKET NO PINS 0 X,33,65 9, 0,5 3,08 3,5 OPERTING POS. TO ENTER OF SMT PD X,05 X,66 8, OF PDS 3X,8 6,6 8, 3X,7,3 TYP 0,8 TYP,5 TYP 3X 0,5 3X,7,5,5 3X,5 69 Dimensions are shown: mm

106 MDS Series Micro Detect Switches TPE ND REEL SL SMT, LEFT MOUNT SR SMT, RIGHT MOUNT,75 0, TYP 0, TYP,5 TYP 3 0,35,5 B B 9,8 3, 0, TYP 8,6 6,7 SETION - PULLING-OUT DIRETION OF THE TPE 5 SETION B-B L SMT, LEFT MOUNT R SMT, RIGHT MOUNT BL SMT, LEFT MOUNT BR SMT, RIGHT MOUNT,75 0, TYP,5 TYP 0, TYP 0,35,5,5,5 3 5,5 8,6 6,7 6 0, TYP SETION - 5 SETION B-B PULLING-OUT DIRETION OF THE TPE Supplied in carrier tape meeting the EI-8- standard for mm tape. Packaging quantity: SL and SR;,600 pieces per reel L, R, BL and BR;,000 pieces per reel 70 Dimensions are shown: mm

107 HB Series Single Pole Standard Precision Switches Features/Benefits Low differential travel, high repeatability Long life50,000 cycles typical Single and double pole circuitry Sealed actuator and case Typical pplications Thermostats Motors Industrial controls Specifications ONTT RTING: From low level* to 0 80 V ; see ELETRIL RTING option section for complete listings. ELETRIL LIFE: 50,000 cycles at 0 50 V. consult ustomer Service enter for typical life at other ratings. INSULTION RESISTNE:,000 M ohm min. DIELETRI STRENGTH:,500 Vrms sea level. OPERTING TEMPERTURE: 67ºF to 30ºF ( 55º to 50º). OPERTING FORE: From oz. to 6 oz. max. at actuator button available. MOUNTING SREWS: Torque 3 in/lbs max. (Note: Exceeding 3 in/lbs torque may change operating characteristics and increase the possibility of cracking switch case). TERMINL SREWS: Torque in/lbs max. PNEL MOUNTING BUSHING: Torque -6 in/lbs max. DEGREE OF PROTETION: IP65; Dust-proof, water splash and dew condensation. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. Materials SWITH HOUSING: Heat resistant/electrical grade phenolic. INSERTS: Brass alloy. TUTOR BUTTON: Moisture resistant phenolic. SPRING: opper alloy. PIVOT: Brass alloy. MOVBLE ONTTS: Gold alloy for ratings MP or less. Fine silver for ratings greater than MP and motor load ratings less than / 5 V. Silver alloy for motor load ratings / 5 V or greater. STTIONRY ONTTS: Gold alloy for ratings MP or less. Fine silver welded to copper base for ratings greater than MP and motor load ratings less than / 5 V. Silver alloy on copper base for motor load ratings / 5 V or greater. TERMINLS: Brass alloy, bright tin plated. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -7 through -76. For additional options not shown in catalog, consult ustomer Service enter. H B S S Series HB Precision Switches Function S SP ontact Separation.00".00".00" 7.070" Electrical Rating B 0, 5, 50, 80 V ; 0.5, 50 V D; 0.5, 5 V D 5, 5, 50 V B6 0, 5, 50, 80 V ; 0.5, 50 V D; 0.5, 5 V D; 3/ HP, 5 V ; / HP, 5O V F5 F9,5 V ;, 3O V D, 5, 77 V ; 5, 80 V ; / HP, 5 V ; / HP, 50 V Operating Force KG 8 oz./50 grams GF oz./3 grams K 9 oz./55 grams K 3 oz./368 grams KH 0 oz./567 grams PB 6 oz./737 grams Mounting Style S Standard ctuator P0 Pin plunger 0 Lever roller D0 Stub plunger F0 Reverse acting lever roller 0 High overtravel plunger R5 Perpendicular roller plunger T0 Lever TS Sealed Lever Y0 Reverse acting lever ircuitry SPDT Terminations Flat base, solder, -0 screws Flat base,.50" quick connect 55 Step base, cup washers, 6-3 screws 7 Dimensions are shown: mm

108 HB Series Single Pole Standard Precision Switches Sealed ctuator and ase To provide reliable service under environmental conditions that might damage standard precision switches, various HB Series switch models are sealed against the entrance of airborne contaminants and/or splashing liquids. The clearance between the operating plunger and the cover is sealed with a silicone boot and the base cover joint is sealed with an epoxy adhesive. These models are designed to meet requirements of IP65 (dust proof, water splash and dew condensation). For additional information on sealed switches, consult our ustomer Service enter. SERIES HB PREISION SNP-TING SWITHES FUNTION S SINGLE POLE SWITH OPER. POS..65 ±.05 (5,88 ± 0,38) Single Pole NOTE: To select switching function, see IRUITRY section, page -5. ONTT SEPRTION OPTION ODE 7 NOMINL ONTT SEPRTION (in./mm).00 (0,5).00 (0,5).00 (,0).070 (,78) Switches with MP rating (option code F5 ) are available only with.00 contact separation (option ). Switches with / HP, 5 V rating or greater (option codes B5 and B6 ) are not available with.00 contact separation (option code )..000 DIFFERENTIL TRVEL SPEIFITION LIMITS FOR VRIOUS ONTT SEPRTIONS.000 INH ONTT SEPRTION Dimensions are are shown: Inches (mm) 7

109 HB Series Single Pole Standard Precision Switches OPERTING FORE OPTION ODE KG MXIMUM OPERTING FORE (OZ./GRMS) 8 50 STNDRD ONTT SEPRTION (inch).00 ONTT SEPRTION OPERTING FORE SPEIFITION LIMITS FOR VRIOUS ONTT SEPRTIONS OUNES GF K K KH STNDRD RNGE MXIMUM LIMITS VILBLE PB NOTE: ll listed differential travel characteristics are based on standard operating force andcontact separation. For any other force or contact separation, consult ustomer Service enter. Operating force varies with actuator option, see TUTOR option section. ELETRIL RTING OPTION ODE B B6 F5 F9 MOVBLE ONTT Fine silver. Precious metal alloy. Gold alloy. Fine silver. STTIONRY ONTT Fine silver welded to copper base. Precious metal alloy. Gold alloy. Fine silver welded to copper base. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. ELETRIL RTING 0 5, 50 & 80 V ; V D; V D (UL). 5 5 & 50 V (UL). 0 5, 50 & 80 V ; V D; V D; 3/ 5 V ; / 50 V (UL). Low level* to 5 V ; 30 V D (UL). 5 & 77 V ; 5 80 V ; / 5 V ; / 50 V ; 77 V (UL). VILBLE OMBINTIONS OPERTING FORE (oz.) ELETRIL RTING B B6 F5 F GF K K KG KH PB x x x x x x x x x VILBLE x NOT VILBLE ll models with all options onsult ustomer Service center for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. 73 Dimensions are shown: Inch (mm)

110 HB Series Single Pole Standard Precision Switches S Standard MOUNTING STYLE NOTE: Mounting holes will accept pins or screws of.39 dia. (3,53) max. on.000 ±.00 (5, ± 0,05) centers. NOTE: Torque mounting screws 3 inlbs max. TUTOR OPTION ODE 0 NO. POLES SP FIG. DIM..86 (,8) DIM. B.0 ±.060 (8,5 ±,5) DIM..38 dia. (9,7Ø) DIM. D.03 (6,) D D D0 SP 3.9 (3,).8 ±.00 (, ± 0,5) B B F0 0 P0 R5 T0 TS* Y0 SP SP SP SP SP SP SP (,3).86 (,8).9 (3,).9 (3,).30 (33,7).7 (37,3).05 (,3).0 ±.050 (8,5 ±,7).860±.030 (,8±0,76).65 ±.00 (5,88 ± 0,5).6 (5,7).70 ±.060 (8,8 ±,5).70 ±.060 (8,8 ±,5).70 ±.030 (8,9 ± 0,76).38 dia. (9,7Ø).50 dia. (,7Ø).03 dia. (6,Ø)).03 dia. (6,Ø).7 dia. (8,8Ø).7 (8,8) 0.6 (5,5).65 (6,73) FIG. Lever Roller B FIG. Lever Roller FIG. 3 Stub Plunger * ctuators sealed against the entrance of airborne contaminants and/or splashing liquids (8,0) Dia. B B D.60 ±.00 PNEL MOUNTING FIG. 5 Pin Plunger B FIG. Plunger.50 DI. (,70?) FIG. 6 Perpendicular Roller Plunger D B B FIG. 8 Reverse cting Lever FIG. 7 Lever 7 Dimensions are shown: Inches (mm)

111 HB Series Single Pole Standard Precision Switches TUTOR OPTION ODE TUTOR 0 D0 F0 0 P0 R5 T0 Y0 * SELED TUTOR TS GF 5 K MXIMUM OPERTING FORE (OZ./GRMS) K KG KH PB GF 8 K MINIMUM RELESE FORE (OZ./GRMS) K KG KH PB NOTE: For basic switch operating forces, see page -7. * ctuators sealed against the entrance of airborne contaminants and/or splashing liquids. MXIMUM DIFFERENTIL TRVEL (IN/MM) MXIMUM PRETRVEL (IN/MM) MINIMUM OVERTRVEL (IN/MM) OPTION ODE GF K K KG KH PB GF K K KG KH PB GF K K KG KH PB.00 (0,5).06 (,57).080 (,03).5 (3,8).3 (7,9).3 (7,9).38 (9,7).38 (9,7).56 (3,96).56 (3,96).56 (3,96).56 (3,96).0005 (0,03).00 (0,05).003 (0,76).007 (0,8).00 (0,5).00 (0,5).05 (0,6).030 (0,76).055 (,0).055 (,0).055 (,0).055 (,0).005 (0,3).008 (0,0).00 (0,5).030 (0,76) 0.8 (,0) 0.8 (,0) 0.9 (,3) 0.9 (,3).06 (,5) 0.9 (,3) 0.9 (,3) 0.9 (,3) TUTOR 0 D0 F0 0 P0 R5 T0 Y0.05 (0,38).00 (0,5).05 (0,6).030 (0,76). (5,6). (5,6). (5,6). (5,6).0005 (0,03).0005 (0,03).00 (0,05).003 (0,08).003 (0,08).005 (0,3).00 (0,5).05 (0,38).00 (0,5).05 (0,6).05 (0,6).030 (0,76).005 (0,3).005 (0,3).005 (0,3).005 (0,3).005 (0,3).005 (0,3).05 (0,38).00 (0,5).05 (0,6).030 (0,76). (3,58). (3,58). (3,58). (3,58).07 (,9).078 (,98).093 (,36).56 (3,96).38 (9,7).38 (9,7).38 (9,7).38 (9,7).9 (,8).9 (,8).9 (,8).9 (,8).005 (0,3).009 (0,3).00 (0,5).03 (0,79).09 (,3).09 (,3) 0.9 (,3) 0.9 (,3).06 (,5) 0.9 (,3) 0.9 (,3) 0.9 (,3) * SELED TUTOR TS.07 (,9).078 (,98).093 (,36).56 (3,96).38 (9,7).38 (9,7).38 (9,7).38 (9,7).9 (,8).9 (,8).9 (,8).9 (,8) Dimensions are shown: Inch (mm) 75

112 HB Series Single Pole Standard Precision Switches TERMINTIONS FLT BSE, SOLDER TERMINLS ND -0 SREWS FLT BSE,.50" QUIK ONNET TERMINLS NOTE: Switches with flat base option have molded ribs that provide increased creep distance. 55 STEP BSE, 6-3 SREWS ND UP WSHERS NOTE: Switches with step base option provide wide electrical clearance for screw terminal options. IRUITRY DT (Double Throw, Normally losed & Normally Open) 76 Dimensions are shown: Inches (mm)

113 Series General Purpose Switches Features/Benefits Low costhigh performance Long electrical life Single and double pole Sealed actuator option available Typical pplications Enclosure equipment Garage door openers Vending machines Specifications ONTT RTING: From low level* to V. ELETRIL LIFE: 75,000 cycles at 5 50 V, 00,000 cycles at 5 50 V. INSULTION RESISTNE:,000 M ohm min. DIELETRI STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 67ºF to 85ºF ( 55º to 85º). OPERTING FORE: 0 oz. (567 grams) max. SP models. 0 oz. (3 grams) max. DP models at actuator button. MOUNTING: Torque screws 3 in/lbs max. MOUNTING NUT: 0 in/lbs max. torque * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Materials SWITH HOUSING: Heat resistant phenolic (UL 9V-0). TUTOR BUTTON: Heat resistant phenolic (UL 9V-0). SPRING: opper alloy. PIVOT: Brass alloy for models up to 5 MPS. opper for 5 MP models. MOVBLE ONTTS: Gold alloy for ratings MP or less. Fine silver for ratings up to 5 MPS. Silver alloy for ratings of 30. MPS. STTIONRY ONTTS: Gold alloy on brass base alloy for ratings MP or less. Fine silver welded on brass base alloy for ratings greater than MP up to 5 MPS. Fine silver welded on copper alloy for ratings 30. MPS. TERMINLS: Brass alloy for MP up to 5 MPS. opper alloy for 30. MPS. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -78 through -8. For additional options not shown in catalog, consult ustomer Service enter. Series General Purpose Switches No. Poles S SP D DP Operating Force KH* 0 oz./567 grams PD** 30 oz./850 grams GG*5 oz./ grams PF**0 oz./3 grams * Single Pole ** Double Pole Electrical Rating 5, 5, 5O V ; 3/ HP, 5 V ; / HP, 50 V F3 5, 5, 50 V ; HP, 5 V c; HP, 50 V ;, V D F5, 5 V, 3O V D ctuator P0 Pin plunger T0 Lever 0 Lever roller Lever roller, high force BB Large red button B Large black button 0 High overtravel plunger L0 Leaf Q0 High operating position plunger W0 Leaf roller Terminations.50" quick connect ircuitry DT W ST N.. Y ST N.O. 77 Dimensions are shown: Inch (mm)

114 Series General Purpose Switches SERIES GENERL PURPOSE SNP-TING SWITHES NO. POLES S SINGLE POLE SWITH Mounting holes will accept pins or screws of.39 dia. (3,53) max., on.000 (5,0) centers. D DOUBLE POLE SWITH Mounting holes will accept pins or screws of.39 dia. (3,53) max., on.000 (5,0) centers. NOTE: To select switching function, see IRUITRY section, page Dimensions are shown: Inches (mm)

115 OPERTING FORE Series General Purpose Switches OPTION ODE KH PD GG PF NO. POLES SP DP SP DP BSI SWITH OPERTING FORE (OZ./GRMS) NOTE: Operating force varies with actuator, see TUTOR option section. ELETRIL RTING ONTT MTERIL OPTION ODE F3 F5 ll models MOVBLE ONTT Fine silver. Silver alloy. Gold alloy. with all options. STTIONRY ONTT Fine silver welded on brass base alloy. Silver welded on copper base alloy. Gold alloy on brass base alloy. ELETRIL RTING 5 5 & 50 V ; 3/ 5 V ; -/ 50 V. 5 5 & 50 V ; 5 V ; 50 V ; V D. From low level* to 5 V, 30 V D. ontact ustomer Service enter for availability and delivery of nonstandard ratings. * Low Level=conditions where no arcing occurs during switching, i.e., 0. V 0 V or D max. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. VILBLE OMBINTIONS ELETRIL RTING F3 OPERTING FORE (OZ./GRMS) GG KH PD PF x F5 VILBLE x NOT VILBLE 79 Dimensions are shown: Inch (mm)

116 Series General Purpose Switches TUTOR OPTION ODE FIG. DIM. DIM. B DIM. DIM. D DIM. E DIM. F B P0.50 (,7).85 ±.030 (7, ± 0,76) (35,).78 ±.06 (8, ±,57).375 dia. (9,53Ø).50 (,7).50 (,7) B BB (3,8).50 (38,).50 (38,).78 ±.06 (8, ±,57).0 ± 0. (0, ±.5).0 ± 0. (0, ±.5).375 dia. (9,53Ø).98 dia. (,9Ø).98 dia. (,9Ø).50 (,7) FIG. High Overtravel Plunger NOTE: The H0 high overtravel plunger option provides.00 min. overtravel and longer mechanical life (,000,000 operations typical) (,7).80 ±.030 (0,6 ± 0,8).38 (9,7).5 dia. (6,Ø) L0.6 (,).3 ±.06 (7,9 ±,57).50 (,7) Q (,7).670 ±.030 (7,0 ± 0,76).38 (9,6).5 dia. (6,Ø) B T (38,).38 ±.06 (8,08 ±,57).50 (,7).50 (,7) W (38,).80 ±.06 (0,3 ±,57).375 dia. (9,53ø).50 (,7) FIG. Leaf E D E D FIG. 3 Lever Roller B F FIG. Lever roller (High Force) B PNEL MOUNTING D B PNEL MOUNTING (8,8 0,08) 6-3 N THD places B FIG. 5 High Overtravel Plunger Torque 0 in/lbs max. (Nut).380±.003 (9,65±0,08)? FIG. 6 B Black Button BB Red Button 0. DI. min places D B B D FIG. 7 Lever FIG. 8 Leaf Roller 80 Dimensions are are shown: Inches (mm)

117 TUTOR Series General Purpose Switches SWITH HRTERISTIS MXIMUM OPERTING FORE (OZ./GRMS) MINIMUM RELESE FORE (OZ./GRMS) MXIMUM PRETRVEL MINIMUM OVERTRVEL OPERTING POSITION OPTION ODE GG KH PD PF S.P. S.P. D.P D.P. GG KH PD PF S.P. S.P. D.P D.P. GG KH PD PF S.P. S.P. D.P D.P. GG KH PD PF S.P. S.P. D.P D.P. GG KH PD PF S.P. S.P. D.P D.P (7,9) 3.87 (7,9) (,75).78 (8,) (6,). (5,6).78 (8,) B (,7) 050 (,7) BB (,7).050 (,7) (,7).87 (,75) L (7,). 06 (,57).3 (7,9) P (,7).050 (,7) Q (,7).050 (,7) T (7,9).87 (,75) 3 (7,9) NOTE: For basic switch operating forces, see page -77. W0.50" QUIK ONNET TERMINTIONS.8 (7,).06 (,57).78 (8,) NOTE: Terminals can be supplied at various angles. Other terminal styles can be supplied for special applications. onsult ustomer Service enter for special requirements. Washer and nut ship with switch IRUITRY W Y DT (Double Throw, Normally Open & Normally losed) ST N.. (Single Throw, Normally losed) ST N.O. (Single Throw, Normally Open) NOTE: To select number of poles, see NO. POLES section, page Dimensions are shown: Inches (mm)

118 TL Series Door Interlock Switches Features/Benefits Push/pull motion Multiple mounting configurations Wide variety of termination options Ratings up to 5 MPS Typical pplications omputer enclosures Panel builders Industrial enclosures Specifications ONTT RTING: 5 5 & 50 V ; V D; V D; / 5 & 50 V ; 3 5 V L. ELETRIL LIFE: 50,000 cycles at 5 50 V. INSULTION RESISTNE:,000 M ohm min. DIELETRI STRENGTH:,000 Vrms sea level. OPERTING TEMPERTURE: 67ºF to 30ºF ( 55º to 50º). NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult ustomer Service enter. Materials SWITH HOUSING: Thermoplastic or general purpose phenolic (UL 9V-0). MOUNTING BRKET: Stainless steel. PLUNGER: Stainless steel. TUTOR BUTTON: Thermoplastic (UL 9V-0). SPRING: opper alloy. PIVOT: Brass alloy. MOVBLE ONTT: Fine silver. STTIONRY ONTTS: Fine silver. TERMINLS: opper alloy. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -83 and -8. For additional options not shown in catalog, consult ustomer Service enter. Model TL One TM Series SPDT switch TL One TM Series SPDT switch 3TL Two TM Series SPDT switches Terminations 60 Screw 0.87" Quick connect.50" Quick connect Plunger Stainless steel, not tapped Stainless steel, tapped Dimensions are shown: Inch (mm) 8

119 TL Series Door Interlock Switches MODEL TL WITH SMLL BRKET.87 [7,].375 MX. FREE POS. [9,53].03 MIN. OPER. POS. [5,6].65 [6,73].5 [6,] STINLESS STEEL PLUNGER.06 [0,3].5 [6,].79 [,55].5MX DEPRESSED POS. [3,8].8 [0,6]. [5,3].300 [33,0].500 [,7] 6-3 N THD. ().8 [5,5].8 [,3] FLEXIBLE INSULTOR TL TL60 SPDT WITH LRGE BRKET.6.5 [6,6] [3].59 [0,].87 [7,].375 MX.FREE POS. [9,53].65 [6,73].5 [3].33 [8,7].03 MIN. OPER. POS. [5,6].5 MX DEPRESSED POS. [3,8].305 () [7,75].33 [8,7].8 [6].50 [38,].75 [9,].50 [38,].5 [6,] STINLESS STEEL PLUNGER. [5,3] FLEXIBLE INSULTOR TL60 SPDT.6 [] 6-3 N THD. (5).59 [0,3] Torque screws to 6in lbs max 83 Dimensions are shown: Inches (mm)

120 TL Series Door Interlock Switches 3TL WITH TWO SWITHES. [3,5].65 [6,73].5 [3] MODEL.87 [7,].375 MX. FREE POS. [9,53].03 MIN. OPER. POS. [5,6].5MX DEPRESSED POS. [3,8].09 [53,].906 [3,0] STINLESS STEEL PLUNGER. [5,3].5 [6,].38 [,3].8 [6].9 [5,56].687 [7,5].7 [6,9] 6-3 N THD. ().79 [,55].8 [0,6].59 [0,5] FLEXIBLE INSULTOR 3TL60 SPDT 60 SREW TERMINLS TERMINTIONS 0.87" QUIK ONNET.50" QUIK ONNET Torque screws to 6in lbs max PLUNGERS STINLESS STEEL, NOT TPPED STINLESS STEEL, TPPED -0 x.375 (9,5) min. depth 8 Dimensions are shown: Inches (mm)

121 DS Series Interlock Pushbutton Switches Features/Benefits Snap-in mounting Reliable snap action mechanism Latch or momentary RoHS compliant Halogen free material Typical pplications Interlock switch Detection switch ircuit interrupt UL6058- Specifications FUNTION: Single pole double throw / Double pole double throw MOUNTING TYPE: Snap in style Electrical ELETRIL LIFE: see ratings chart below DIELETRI STRENGTH: 500 V (50-60 sea level) INSULTION RESISTNE: 00 M Ω min. INITIL ONTT RESISTNE: 30 milli-ohms Materials HOUSING, OVER, TUTOR, KNOB: P 66/6 halogen free, UL9V-0 NO & N FIXED TERMINLS: opper alloy OMMON TERMINLS: opper alloy, silver plate ONTTS: Silver alloy / F5 rating gold plated over silver alloy RETURN SPRINGS: Stainless steel Operating Environment OPERTING TEMPERTURE: -0 to +85 NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact ustomer Service. Build--Switch To order, simply select desired option from each category and place in the appropriate box. D S Designation DS DS Series Number of Poles SPDT DPDT Rating F5 0. 5/50 V 50/60 Hz 50E3 0. 5/50 V 50/60 Hz 50E3 F7 0. 5/50 V 50/60 Hz 0E 0. 5/50 V 50/60 Hz 0E D6 0 V 50/60 Hz 50E3 0 5 / 50 V 5/50 V 50/60 Hz 0E3 D7* 6 V 3/HP 5/50 V 50/60 Hz 0E3 6 V 50/60 Hz 0E3 * Note - 6 version has Q3 terminals only International Rating Symbols 0E3 ycles 0,000 0E ycles 00,000 50E3 ycles 50,000 0() urrent rating: First number represents resistive rating. Second number represents inductive (motor) rating GP General purpose rating UL05 Housing olor NONE White B Black Terminals Q.8 x 0.5 Q.8 x 0.8 Q3 6.3 x 0.8 ctuator Style Momentary, Short button B Momentary, Long button Momentary/Pulled out button (not available on D7 rating) 85 Dimensions are shown: mm