Manual: Distribution Substation Manual (DSM) Section 5: Substation Fire Protection Requirements
|
|
|
- Ross Cox
- 5 years ago
- Views:
Transcription
1 Manual: Distribution Substation Manual (DSM) Section 5: Substation Fire Protection Requirements Standard Number: HPC-5DA
2 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document Owner Name: Justin Murphy (May also be the Process Owner) Position: Manager Asset & Works Approved By * Name: Justin Murphy Position: Manager Asset & Works Date Created/Last Updated July 2013/May 2014 Review Frequency ** 3 yearly Next Review Date ** July 2016 * Shall be the Process Owner and is the person assigned authority and responsibility for managing the whole process, end-to-end, which may extend across more than one division and/or functions, in order to deliver agreed business results. ** Frequency period is dependent upon circumstances maximum is 5 years from last issue, review, or revision whichever is the latest. If left blank, the default shall be 1 year unless otherwise specified. Revision Control Revision Date Description 0 12/07/2013 Original Issue 1 26/5/2014 Reissue of document Manager Assets & Works Manager Engineering Services STAKEHOLDERS The following positions shall be consulted if an update or review is required: Manager Engineering Systems Planning DM# Page 2 of 12 Print Date 10/06/2014
3 TABLE OF CONTENTS 1 PURPOSE SCOPE & APPLICATION CONTENTS Index of Drawings REFERENCE DOCUMENT REVISION INFORMATION... 6 DM# Page 3 of 12 Print Date 10/06/2014
4 1 PURPOSE This Standard specifies the arrangements for the consideration of Fire Risk Areas in and around Substation Equipment used on Horizon Power Distribution networks. This Standard supersedes the Western Power Document (DM# ] previously in use by Horizon Power since disaggregation. 2 SCOPE & APPLICATION This Standard specifies, the fire exclusion zone requirements for the various types of Substations used in Horizon Power Distribution Networks. 3 CONTENTS 3.1 Index of Drawings Drawing Number Drawing Title Industrial & Commercial Areas DSM-5-01 Case 1 Isolated Substation, Totally Non-Fire Rated DSM-5-02 Case 2 Isolated Substation, Open Top, Non-Fire Rated Doors 2 hour Fire Rated Walls DSM-5-03 Case 3 Adjacent Substation, Totally Non-Fire Rated DSM-5-04 Case 4 Attached or Adjacent Substation, Non-Fire Rated Doors Vents, 2 hour Fire Rated Walls & Roof DSM-5-05 Case 5 Indoor Substation with Public Access Over DSM-5-06 Residential Areas Case 6 Isolated Substation, Totally Non-Fire Rated DM# Page 4 of 12 Print Date 10/06/2014
5 4 REFERENCE DOCUMENT The following Reference Documents have been used to prepare this Standard: Doc Ref. Document Title Record No DM# AS AS/NZS AS 3008 Substations & high voltage installations Wiring Rules Cables for Alternating Voltages up to and Including 0.6/1 kv Distribution Substation Manual Sect 5 Substation Fire Protection (Superseded) Publisher SAI Global SAI Global SAI Global Horizon Power HPC-5DC HPC-5DA HPC-5DA HPC-5DA HPC-5DA HPC-5DA HPC-5DA HPC-9DJ NOTE: Distribution Design Manual: Volume Horizon Power Distribution Substation Manual Sect 1 Customer Supply Arrangements Distribution Substation Manual Sect 2 Medium Voltage Network Arrangements Distribution Substation Manual Sect 3 Substation Arrangements Distribution Substation Manual - Sect 4 Equipment Installation Guide Distribution Substation Manual Sect 6 Miscellaneous Distribution Substation Manual Sect 9 Environmental Requirements Horizon Power Horizon Power Horizon Power TBA Horizon Power Horizon Power Horizon Power Substation Installation Requirements Horizon Power Western Australian Distribution Connections Manual (WADCM) Western Australian Electrical Requirements DM# number is liable to change without notice. Regional Power & Electricity Networks Corporation Office of Energy safety DM# Page 5 of 12 Print Date 10/06/2014
6 5 REVISION INFORMATION (Informative) Horizon Power has endeavoured to provide standards of the highest quality and would appreciate notification if any errors are found or even queries raised. Each Standard makes use of its own comment sheet which is maintained throughout the life of the standard, which lists all comments made by stakeholders regarding the standard. A comment sheet found in DM: , can be used to record any errors or queries found in or pertaining to this standard, which can then be addressed whenever the standard gets reviewed. Date Rev No. Notes 12/07/ Original Issue 26/05/ Changes made to title for DSM 5-01 DM# Page 6 of 12 Print Date 10/06/2014
7 DM# Page 7 of 12 Print Date 10/06/2014
8 DM# Page 8 of 12 Print Date 10/06/2014
9 DM# Page 9 of 12 Print Date 10/06/2014
10 DM# Page 10 of 12 Print Date 10/06/2014
11 DM# Page 11 of 12 Print Date 10/06/2014
12 DM# Page 12 of 12 Print Date 10/06/2014
Manual: Distribution Substation Manual (DSM) Section 4: Equipment Installation Guide
Manual: Distribution Substation Manual (DSM) Section 4: Equipment Installation Guide Standard Number: HPC-5DA-07-0004-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document
Distribution Substation Manual (DSM) Section 6: Miscellaneous
Distribution Substation Manual (DSM) Section 6: Miscellaneous Standard Number: HPC-5DA-07-0006-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document Owner Name: Justin
Manual: Distribution Substation Manual (DSM) Section 1: Customer Supply Arrangements
Manual: Distribution Substation Manual (DSM) Section 1: Customer Supply Arrangements Standard Number: HPC-5DA-07-0001-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document
HPC-9DJ
Guideline General Application of Switching Devices on Distribution Networks Standard Number: HPC-2AA-07-0001-2012 Document Control Author Name: Anthony Seneviratne Position: Senior Standards Engineer Document
Network Asset Design Standard HV SUBSTATION FEEDER EXIT CIRCUITS ISOLATION POLICY
Network Asset Design Standard HV SUBSTATION FEEDER EXIT CIRCUITS ISOLATION POLICY Original Issue: September 2007 Prepared by: Lee Chan & Rob Rogerson This Revision: 0 October 2007 Date For Next Review:
Name: Denis Deschamps Position: Maintenance Business Process Specialist Department: Base Metals
MPROC-2008 207-08-07 of 8 Training Code (If applicable): Document Owner: Name: Denis Deschamps Position: Maintenance Business Process Specialist Department: Base Metals Table of Contents.0 PURPOSE... 2
Network Configuration Document Selection for New Substations Framework
Network Configuration Document Selection for New Substations Current version: 20/06/2018 EXTERNAL USE Page 1 of 14 Table of contents 1. Introduction... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 References...
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
Distribution Substation Manual (DSM) Section 8 Distribution Automation
(DSM) Section 8 Distribution Automation July 2010 Document release information Client Project name Western Power Distribution Substation Manual Document number 8 Document title Revision status Distribution
Engineering Document Control
Division / Business Unit: Function: Document Type: Enterprise Services All Disciplines Procedure Engineering Document Control Applicability ARTC Network Wide SMS Publication Requirement Internal / External
EDS MW AND MVAR TRANSDUCER CONNECTION
Document Number: EDS 05-5001 Network(s): Summary: ENINEERIN DESIN STANDARD EDS 05-5001 MW AND MVAR TRANSDUCER CONNECTION EPN, LPN, SPN This standard details the convention to be used when wiring MW and
1.0 Executive Summary. 2.0 Features and Benefits
Table of Contents 1.0 EXECUTIVE SUMMARY 2.0 FEATURES AND BENEFITS 3.0 DETAILS OF SERVICE 4.0 Deliverable 5.0 Exclusions 6.0 SCOPE OF RESPONSIBILITY 7.0 PROJECT WORK DETAILS 8.0 ORDERING INFORMATION 9.0
Standards Update Notice (SUN) Issued: April 25, 2017
Standard Information Standard Number: UL 1951 Standard Name: Electric Plumbing Accessories Standard Edition and Issue Date: 2 nd Edition Dated July 22, 2011 Date of Revision: February 21, 2017 Date of
Solar Combiner Enclosure
Installation Instructions Solar Combiner Enclosure Catalog Numbers 1000-SB006, 1000-SB012 Topic Page Description 1 Important Safety Instructions 3 Nameplate Data 4 Planning for Installation 4 Install the
MESP TECHNICAL SPECIFICATION FOR SCADA CABLING IN SUBSTATIONS
Engineering Specification Electrical Networks MESP 081000-01 TECHNICAL SPECIFICATION FOR SCADA CABLING IN Version: 1 Issued: March 2014 Owner: Electrical Networks Asset Manager Approved By: George Marulli
Conext CL-60 Inverter Firmware Upgrade Process
Conext CL-60 Inverter Firmware Upgrade Process http://solar.schneider-electric.com 976-0380-01-01/B August 2017 Application Note EXCLUSION FOR DOCUMENTATION UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER
MF1 MOA4 S50. Contactless Chip Card Module Specification. This document gives specifications for the product MF1 MOA4 S50.
Rev. 3.2 19 December 2006 Product data sheet 083032 PUBLIC 1. General description 1.1 Addendum This document gives specifications for the product. The is the integrated circuit MF1 ICS50 in the package
Ongoing conformance of the product with the standard is the responsibility of the certificate holder and the Australian manufacturer or importer.
1. Preface The (TECS) offered by Comtest Certification Body is based on a type test scheme, which is one where a representative sample is provided for testing and certification, and does not include any
IEEE 383 Standard for Qualifying Electric Cables and Splices for. NPEC July 2014 Robert Konnik. Nuclear Facilities Preview
IEEE 383 Standard for Qualifying Electric Cables and Splices for NPEC July 2014 Robert Konnik Nuclear Facilities Preview IEEE 383 Background This standard provides guidance for developing a program to
SAMPLE REPORT. Business Continuity Gap Analysis Report. Prepared for XYZ Business by CSC Business Continuity Services Date: xx/xx/xxxx
SAMPLE REPORT Business Continuity Gap Analysis Report Prepared for XYZ Business by CSC Business Continuity Services Date: xx/xx/xxxx COMMERCIAL-IN-CONFIDENCE PAGE 1 OF 11 Contact Details CSC Contacts CSC
Implementation Plan for COM-001-2
Defined Terms in the NERC Glossary The RC SDT proposes the following new definitions: Interpersonal Communication: Any medium that allows two or more individuals interact, consult, or exchange information.
PRC Coordination of Protection Systems for Performance During Faults
PRC-027-1 Coordination of Protection Systems for Performance During Faults A. Introduction 1. Title: Coordination of Protection Systems for Performance During Faults 2. Number: PRC-027-1 3. Purpose: To
ERO Enterprise Registration Practice Guide: Distribution Provider directly connected Determinations Version 2: July 5, 2018
ERO Enterprise Registration Practice Guide: Distribution Provider directly connected Determinations Version 2: July 5, 2018 Purpose The purpose of this Practice Guide is provide a reference to be used
1.0 Executive Summary
Statement of Work - 1 - Power and Cooling Assessment for Data Center Professional Services Service 1.0 Executive Summary Table of Contents 1.0 Executive Summary 2.0 Features & Benefits 3.0 Details of Service
Document C0. Use for:
Date: July 27, 2015 Document C0 Use for: Connection of Electric Generation that will operate with an Open Transition (Category 1) between the Ameren System and the Generator or operate with a Synchronized
P216. Condenser fan speed controller. Product bulletin. Features
P216 Condenser fan speed controller Product bulletin These controllers are designed for speed variation of single phase motors, especially for fan speed control on air cooled condensers. Head pressure
Standard Development Timeline
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Description of Current Draft
Recording and Reporting of High Voltage and Low Voltage Switching
1 SCOPE This document details the procedures to be adopted prior to, during, and on completion of Switching operations, and details the manner in which HV and LV Switching shall be recorded in order to
CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.
Rev. 2 28 September 2010 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module operating at a supply voltage of 24 V (DC) in an SOT115J package. The module
EDS SCADA NUMBERING SYSTEM
Document Number: EDS 05-9007 Network(s): Summary: EPN, LPN, SPN ENGINEERING DESIGN STANDARD EDS 05-9007 SCADA NUMBERING SYSTEM This standard describes the system for numbering SCADA wiring within switchgear
Balancing and Settlement Code BSC PROCEDURE
Balancing and Settlement Code BSC PROCEDURE Registration of Transmission System Boundary Points, Grid Supply Points, GSP Groups and Distribution Systems Connection Points BSCP25 Version 8.0 Date: 29 June
MESP TECHNICAL SPECIFICATION FOR A RECTIFIER UNIT CONTROL & PROTECTION SYSTEM FOR USE IN THE 1500V DC TRACTION SYSTEM
Engineering Specification Electrical Networks TECHNICAL SPECIFICATION FOR A RECTIFIER UNIT CONTROL & PROTECTION SYSTEM FOR USE IN THE 1500V Version: 1 Issued: March 2014 Owner: Electrical Networks Asset
Microlok Data Design Records (Addressing, File Control, Checking, and FAT Testing)
Discipline: Engineering (Signalling) Category: Procedure Microlok Data Design Records (Addressing, File Control, Checking, and FAT Testing) ESD-05-11 Applicability ARTC Network Wide Primary Source Signal
DRAFT. Application Note: Modbus/RS485 Wiring for Conext Core XC Series Inverters. 1.0 Introduction DANGER. 1.1 Related Documents
Application Note: Modbus/RS485 Wiring for Conext Core XC Series Inverters AP-XC-025 Revision B 1.0 Introduction DANGER RISK OF ELECTRIC SHOCK, EXPLOSION, ARC FLASH, AND FIRE This Application Note is in
When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description
Uni-I/O Modules Installation Guide UID-0808R, UID-0808T, UID-1600,UID-0016R, UID-0016T Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides
OE-PM Project Charter Document
Enter Project Name Here Enter Department Name OE-PM Project Charter Document Status: (Draft or Published) Version: (0.# or 1.#) Prepared by: Date Created: Date Last Revised: OE-PM Artifact ID: P01.00 Internal
SOUTHERN COMPANY DISTRIBUTION INTERCONNECTION POLICY
SOUTHERN COMPANY DISTRIBUTION INTERCONNECTION POLICY Inverter Based Generators 25 kw and This document contains the interconnection requirements for inverter based generators, 25 kw and smaller, that operate
Saving the Project Brief document under its own name
HOW TO USE THIS TEMPLATE: Introduction The template reflects the steps set out in the PRINCE2 Method and is designed to prompt the Project Manager and help in the creation of the. The information for the
Process Definition: Security Services
Process Definition: Services 1. SUMMARY Process Definition: Services 1.1. This document defines the processes provided by the Services team in detail. 1.2. The relationship between this Business Unit process
Alberta Reliability Standard Cyber Security Incident Reporting and Response Planning CIP-008-AB-5
A. Introduction Consultation Draft April 5, 2016 1. Title: 2. Number: 3. Purpose: To mitigate the risk to the reliable operation of the bulk electric system as the result of a cyber security incident by
Open Access. Definitions
Open-IX Data Center Technical Standards Version 2.0, January 1, 2018 Questions: dc-group@open-ix.org The purpose of the Open- IX Data Center Technical Standards document is to establish a recommended standard
When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description
Uni-I/O Wide Modules Installation Guide UID-W1616R, UID-W1616T Uni-I/O Wide is a family of Input/Output modules that are compatible with the UniStream control platform. Wide Modules are 1.5 times as wide
A. Introduction. B. Requirements and Measures
A. Introduction 1. Title: Communications 2. Number: COM-001-3 3. Purpose: To establish Communication capabilities necessary to maintain reliability. 4. Applicability: 4.1. Functional Entities: 4.1.1. Transmission
SPI PowerNet requirements for the non-contestable Interface Works at Deer Park Terminal Station
SPI PowerNet requirements for the non-contestable Interface Works at Deer Park Terminal Station SPI PowerNet Reference: ZD23 Version: 1.1 Issue date: 15 May 2014 Contents 1 Scope... 3 2 Deer Park Terminal
COM Interpersonal Communications Capabilities
COM-001-3 Interpersonal Communications Capabilities 1 Background In the FERC Notice of Proposed Rulemaking (NOPR) for COM-001-2, the Commission asked for comments on whether the standard should be modified
Goddard Procedures and Guidelines
Goddard Procedures and Guidelines DIRECTIVE NO.: GPG 1410.1 APPROVED BY Signature: Original Signed by NAME: A. V. Diaz TITLE: Director Responsible Office: 230/Logistics Management Division Title: DIRECTIVES
DESIGN PRACTICE NOTE NEGATIVE BUSBAR SHUNTS
Approval Amendment Record Approval Date Version Description 27/05/2013 1 Initial issue under MTM. PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 1 of 6 Table of Contents
TELECOMMUNICATION FACILITIES SITING AND CONSULTATION POLICY
POLICY P-22 TELECOMMUNICATION FACILITIES SITING AND CONSULTATION POLICY Preamble It is recognized that while reliable and sophisticated telecommunication facilities are a benefit to the citizens of (CSRD),
Requests for Clarifications And Responses Order No. 754 Data Request The Study of Single Point of Failure
Requests for Clarifications And Responses Order No. 754 Data Request The Study of Single Point of Failure Revised: July 12, 2013 Introduction The following information includes requests for clarification
Trendmaster* Galvanic Isolator
162459-01 Trendmaster* Galvanic Isolator Product Datasheet Bently Nevada* Asset Condition Monitoring Description The Trendmaster Galvanic Isolator enables the Trendmaster system to connect to intrinsically
CITY OF TORONTO TELECOMMUNICATION TOWER AND ANTENNA PROTOCOL (Industry Canada Local Land-use Authority Consultation)
Attachment 1: Approved Telecommunications Protocol (Adopted by City Council - March 3, 4 and 5, 2008) CITY OF TORONTO TELECOMMUNICATION TOWER AND ANTENNA PROTOCOL (Industry Canada Local Land-use Authority
SECTION PROJECTOR LIFTS AND MOUNTS. A. Refer to Section [ Submittal Procedures] [Insert section number and title].
![SECTION PROJECTOR LIFTS AND MOUNTS. A. Refer to Section [ Submittal Procedures] [Insert section number and title].](/thumbs/85/91906702.jpg "SECTION PROJECTOR LIFTS AND MOUNTS. A. Refer to Section [ Submittal Procedures] [Insert section number and title].")
(Specifier Note: The purpose of this guide specification is to assist the Specifier in correctly specifying AeroLift motorized projector lifts and their installation. The Specifier needs to edit these
TeSys Programmer. Firmware Update Utility for LTMR & LTMCU User Manual. January 2017
TeSys Programmer Firmware Update Utility for LTMR & LTMCU User Manual January 2017 Legal Information The Schneider Electric brand and any registered trademarks of Schneider Electric Industries SAS referred
DRAFT. Cyber Security Communications between Control Centers. March May Technical Rationale and Justification for Reliability Standard CIP-012-1
DRAFT Cyber Security Communications between Control Centers Technical Rationale and Justification for Reliability Standard CIP-012-1 March May 2018 NERC Report Title Report Date I Table of Contents Preface...
State of Rhode Island Department of Administration Division of Information Technol
Division of Information Technol 1. Background Physical and environmental security controls protect information system facilities from physical and environmental threats. Physical access to facilities and
C-Bus Network Bridge 5500NB. Series. Installation Instructions REGISTERED DESIGN REGISTERED PATENT
C-Bus Network Bridge 5500NB Series Installation Instructions REGISTERED DESIGN REGISTERED PATENT Contents 1.0 Description...3 1.1 Capabilities...3 1.2 Status Indicators...4 2.0 C-Bus Network Connections...5
550 MHz, 34 db gain push-pull amplifier
Rev. 01 31 May 2006 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module in SOT115BA package operating at a supply voltage of 24 V (DC). CAUTION This
EBB PILOT FOR THE LIVE CONNECTION OF UNMETERED EQUIPMENT TO OVERHEAD LINES
Network(s): Summary: ENGINEERING BULLETIN EBB 08-0061 PILOT FOR THE LIVE CONNECTION OF UNMETERED EQUIPMENT TO OVERHEAD LINES EPN, SPN This bulletin provides a framework for the pilot scheme for unmetered
Test Report S
Sunkom Pty Ltd FDX card s A101, A102, A104 and A108 Laboratory Details All tests were performed at : Comtest Laboratories Pty. Ltd. Unit 1 / 570 City Road South Melbourne Victoria 3205 Australia Telephone
Series 8000 RF Signal Switch Solution
RF Signal Switch Solution Operation Manual Operation Manual, Part Number 07508000 006, Rev. B, Oct 7, 2014 All technical data and specifications in this publication are subject to change without prior
NERC Relay Loadability Standard Reliability Standards Webinar November 23, 2010
Transmission Relay Loadability FERC Order 733 Project 2010-1313 NERC Relay Loadability Standard Reliability Standards Webinar November 23, 2010 Project Overview 2 Standards Involved PRC-023-2 Transmission
EcoStruxure Power Commission Installation Guide
EcoStruxure Power Commission DOCA0134EN 03/2019 EcoStruxure Power Commission Installation Guide 03/2019 DOCA0134EN-04 www.schneider-electric.com The information provided in this documentation contains
Title Substations - Base Safety & Operating Standards. Reference Number POP 07 - (RIC Standard: EP SP)
Discipline Engineering Standard - NSW Category Electrical Title Reference Number POP 07 - (RIC Standard: EP 99 00 00 04 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Mar 05 Standards
DESIGN STANDARD DS 28
Assets Delivery Group Engineering DESIGN STANDARD DS 28 VERSION 1 REVISION 7 JANUARY 2018 FOREWORD The intent of Design Standards is to specify requirements that assure effective design and delivery of
Total Reach ISDN/DDS Isolation Card P VDC to 24VDC External Power Supply P30060 Description & Installation
Total Reach ISDN/DDS Isolation Card P30101 48VDC to 24VDC External Power Supply P30060 Description & Installation Printed in USA 09/11 T0454 Rev. A Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT OVERVIEW
Specification Voltage Limiting Device
Engineering Specification Electrical Networks L1-CHE-SPE-152 Specification Voltage Limiting Device Version: 1 Issued: 20 th April 2018 Owner: Chief Engineer Approved By: Andrew Russack Head of Engineering,
Request for Qualifications
Request for Qualifications May 4, 2017 Request for Qualifications Quality information Prepared by Checked by Approved by Jessica R. Chevreaux Program Manager Revision History Revision Revision date Details
Guideline for the Connection of Micro Embedded Generators to the TasNetworks Distribution Network
Tasmanian Networks Pty Ltd ABN 24 167 357 299 Guideline for the Connection of Micro Embedded Generators to the TasNetworks Distribution Network (AS4777 Compliant) NG R PD 09 Version 2.0 July 2014 TABLE
AWS D16.2M/D16.2:2007 An American National Standard. Guide for Components of Robotic and Automatic Arc Welding Installations
An American National Standard Guide for Components of Robotic and Automatic Arc Welding Installations An American National Standard Approved by the American National Standards Institute August 25, 2006
Delaney - Colorado River 500 kv Transmission Line Project Phase 3 Competitive Solicitation
Steve Rutty Director, Grid Assets Lou Fonte Delaney - Colorado River 500 kv Transmission Line Project Phase 3 Competitive Solicitation Lead Engineer, Grid Assets September 3, 2014 Transmission Planning
User Guide. DMXSM-H18 Splitter. DMXSM-H81 Merger. Document Release Aug Revision B
User Guide DMXSM-H18 Splitter DMXSM-H81 Merger Document Release Aug. 2008 Revision B Warranty Leviton Manufacturing Co Inc. warrants this device to be free of material and workmanship defects for a period
Miniature circuit breakers for all applications
Miniature circuit breakers for all applications BETA Low-Voltage Circuit Protection Answers for infrastructure. BETA Low-Voltage Circuit Protection: Circuits under Control, Wherever, Whenever. Whether
IMPORTANT NOTICE. use
Rev. 05 2 January 2008 Product data sheet IMPORTANT NOTICE Dear customer, As from October 1st, 2006 Philips Semiconductors has a new trade name -, which will be used in future data sheets together with
ABB Digital medium-voltage switchgear
NAMIBIA AMEU/AEDU MARCH 2018 ABB Digital medium-voltage switchgear Barry Addinall UniGear Digital Contents 1. Digital switchgear 2. Complexity of Distribution networks 3. New technologies using digital
UITS Data Center Access Policies and Procedures
UITS Data Center Access Policies and Procedures Revision 5: 2/15/2017 2/15/17 Page 1 Author: Len Sousa, UConn/UITS Contents... 1 UITS Data Center Access Policies and Procedures... 1 1. Introduction...
This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective.
Standard Development Timeline This section is maintained by the drafting team during the development of the standard and will be removed when the standard becomes effective. Development Steps Completed
PR3400 Series 1.4Mp USB Cameras Hardware Guide
PR3400 Series 1.4Mp USB Cameras Hardware Guide Manufactured by: SPOT Imaging Solutions, a division of Diagnostic Instruments, Inc. 6540 Burroughs Ave. Sterling Heights, MI 48314-2133 USA Toll-Free: 866-604-SPOT
Configurable Output Distribution. 120V / 208V / 240V 60Hz. User Manual English
Configurable Output Distribution 120V / 208V / 240V 60Hz User Manual English TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS.......................... 1 GLOSSARY OF SYMBOLS....................................
XXXX. Bear Creek Hydro Generation Project. Interconnection Facilities Study
XXXX Bear Creek Hydro Generation Project Interconnection Facilities Study Report No. SPA 2005-33 August 2005 System Planning (Lower Mainland & Vancouver Island) British Columbia Transmission Corporation
ENGLISH General information
Opener User Guide Congratulations for having purchased the iblue Smart Gate product. Please read this User Guide carefully before installing and starting to use the product. The product package includes
FEB2018 Rev H
Product Specification 108-32122 14FEB2018 Rev H PV Edge Solar Junction Box 1. SCOPE 1.1. Content This specification covers the performance, tests and quality standards for the SOLARLOK* PV Edge Solar Junction
3M Duplex Polishing Machine 6851-E with Universal Dual Holder Instructions
3M Duplex Polishing Machine 6851-E with Universal Dual Holder Instructions Safety Information Read, understand and follow all safety information contained in these user instructions prior to use of the
Description of the Application Process for Small Embedded Generators
Description of the Application Process for Small Embedded Generators This document describes the Application Process for Small Embedded Generators (as required under section 5.3.3A of the National Electricity
Installation Service. 1.0 Executive Summary. Factory Trained Technician Train Customer Support Staff On Basic Operation Of The Equipment
Installation Service Statement of Work Start-up Service for Cooling Start-up - 1 - Service for Cooling Service 1.0 Executive Summary Table of Contents 1.0 Executive Summary 2.0 Features & Benefits 3.0
17. Microwave Collocation 17.1 General
Original Page 1 17.1 General 17.1.1 General A. Unless otherwise specified herein, general regulations contained in Sections 1 through 4 and Sections 14 and 15 apply in addition to the regulations contained
BID. Electronically Submitting a Building Permit Application Using COJ s Building Inspection Division s Electronic Permitting and Plan Review System
COJ s Building Inspection Division Electronically Submitting a Building Permit Using COJ s Building Inspection Division s Electronic Permitting and Plan Review System Updated 1/5/2015 CONTENTS Status Definitions
Memorandum. This memorandum requires Board action. EXECUTIVE SUMMARY
California Independent System Operator Corporation Memorandum To: ISO Board of Governors From: Keith Casey, Vice President, Market & Infrastructure Development Date: May 21, 2014 Re: Decision on interconnection
Capital Contribution Policy for New Load and Network Extensions Marlborough Lines
Capital Contribution Policy for New Load and Network Extensions Marlborough Lines Table of Contents 1. Glossary of Terms... 3 2. Purpose... 4 3. Policy... 5 4. Network Development Levy... 6 5. Remote Area
STCP Amendment Proposal Form
STCP Amendment Proposal Form PA036 1. Title of Amendment Proposal STCP 09-2 Incorporation material currently within SPT SCS and making standard for both TOs. 2. Description of the Proposed Amendment (mandatory
IMS INTERFACE MARKET PROCEDURE NETWORK OPERATORS AND AEMO
IMS INTERFACE MARKET PROCEDURE NETWORK OPERATORS AND AEMO PREPARED BY: System Management (WA) DOCUMENT REF: SO_OP_WA_3805 VERSION: 1.0 EFFECTIVE DATE: 13/10/2017 STATUS: FINAL Approved for distribution
An Urgent Bulletin from CSA Group
An Urgent Bulletin from CSA Group Photovoltaic Equipment No. 5 Date: September 21, 2015 See Attachment 1 for Effective Dates. See Attachment 1 for Application Due Dates Announcing: Publication of List
DATASHEET 4D SYSTEMS. 4D Raspberry Pi Serial Adaptor TURNING TECHNOLOGY INTO ART. 4D-Serial-Pi-Adaptor
TURNING TECHNOLOGY INTO ART DATASHEET 4D-Serial-Pi-Adaptor Document Date: 20 th November 2012 Document Revision: 1.0 Uncontrolled Copy when printed or downloaded. Please refer to the 4D Systems website
CAPABILITY STATEMENT. A full list of our services.
CAPABILITY STATEMENT A full list of our services. About Us MVLV Power Solutions Pty Ltd is a privately owned Western Australian based company, specialising in the Design and Manufacture of Electrical Switchboards
ECP NORTROLL CABLETROLL 2350 FPI INSTALLATION AND COMMISSIONING PROCEDURE
Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0521 NORTROLL CABLETROLL 2350 FPI INSTALLATION AND COMMISSIONING PROCEDURE EPN, LPN, SPN This document details the installation, testing
Installing and Configuring Rialto Analytic Appliances
Installing and Configuring Rialto Analytic Appliances Important Safety Information This manual provides installation and operation information and precautions for the use of this camera. Incorrect installation
#353. Gate Operators and the ANSI/UL 325 Standard. Introduction
Gate Operators and the ANSI/UL 325 Standard Introduction UL 325 is a standard for safety that addresses the automatic operation of garage doors, vehicular gates, louvers, and windows. In this Technical
For more information, visit: 3M Cold Shrink QS-III Splice a one-piece joint with wide range and geometric stress control
for Medium Voltage Grid Automation Visibility inreal Time An effective solution for monitoring your underground distribution system 3M is a global technology company, manufacturing over 50,000 products
Our Power & Control line of Business offers solutions that safely distribute power to your home or business. Our product range includes Low/Medium
Our Power & Control line of Business offers solutions that safely distribute power to your home or business. Our product range includes Low/Medium Voltage Panels and Enclosures designed and built with
Standard CIP-006-4c Cyber Security Physical Security
A. Introduction 1. Title: Cyber Security Physical Security of Critical Cyber Assets 2. Number: CIP-006-4c 3. Purpose: Standard CIP-006-4c is intended to ensure the implementation of a physical security
CompactBlock Guard I/O EtherNet/IP Safety Modules
Installation Instructions CompactBlock Guard I/O EtherNet/IP Safety Modules Catalog Numbers 1791ES-IB8XOBV4, 1791ES-IB16 Topic Page Important User Information 2 North American Hazardous Location Approval