HMI USER SOFTWARE MMStex OF RETURN EQUIPMENT

Transcription

1 HMI USER SOFTWARE MMStex OF RETURN EQUIPMENT Each Garment Management System MMStex equipment has an HMI User Software for the management of automatisms, stocks, consumptions and users, which allows the equipment to work "on line" and "off line", and to guarantee the continuous operation of the equipment in case of a communication error with the server. A. Operational Requirements The return equipment does NOT require a prior login of the user. B. HMI user software MMStex interface in Return Equipment Find below the interaction screens between the user and the HMI software. a. User Profile b. Restocker Profile B.1 User Profile B.1.1 Number of Garments and Opening Drawer Selection Screen The user can select the number of garments they want to return (1 or 2 units) 1. Garments to be returned selection screen

2 Once the amount on the screen has been selected, you can open (by pulling up) the return drawer. The selected option remains marked and a message will indicate that the return drawer must be opened 2. Selected return garment screen (green frame) B.1.2 Garment Insertion and Drawer Closing Screen The user deposits the garment(s) and closes the drawer (by pulling down). Next, the drawer automatically locks, proceeds to read the garment(s) and displays a message on the screen. 3. Waiting for garment/s introduction and drawer closing screen

3 B.1.3 Reading and Return Validation Screen Once the user closes the drawer, the equipment reads the tag/s and displays on the screen the correct return validation Garment Return Validation Screen If the reading is incorrect, repeat as of step B.1.1, checking that the correct number of garments to be returned has been indicated. 5. Incorrect return screen, 0 garments detected

4 B.2 Restocker Profile B.2.1 Restocker Login Screen To access the login menu, it is necessary to hold down the upper MMS logo to display the keyboard insertion method and enter the "restocking code." 6. Restocker login screen in return equipment B.2.2 Restocking Menu Screen The following options are available within the restocker menu: Restocking menu in return equipment screen

5 The options that appear in the restocking menu of the return equipment are: 1) Modules management 2) View equipment stock 3) View alarms 4) Search modules B.2.3 Modules Management and View Equipment Stock Screen It is possible to visualize the garments previously returned. To do so, click on ReadDB to view the garments and the tag they refer to, sorted in chronological order. 8. Management and display of restocking menu screen At the same time, by pressing the Ret 1 button the upper part of the drawer of the equipment can be open, where the users leave their pyjamas. By pressing the Open button, the lower part of the equipment can be open, where the bag holder trolley is located (dirty garment collector).

6 B.2.4 Alarms Screen The two main alarms in the module are the open door and full trolley alarms. Both are visible to the user and if they remain active, garments cannot be returned: 9 and 10. Open door and full trolley alarmscreen B.2.5 Search Module Screen By clicking on search module in the main menu, the system will cover a sweep to identify all connected modules. In return equipments, there is only one module, so it will only find such module. B.2.6 WS Connection Status By double-clicking on the WS logo, the system will check the connectivity of the equipment at that time. While the check is being carried out, it will turn orange and the result will be displayed whether as Is Ok or Error: 11. WS Connection Status