STAHLWILLE spanners. STAHLWILLE spanners
|
|
- Stuart Watson
- 5 years ago
- Views:
Transcription
1
2 STAHLWILLE spanners Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into consideration. In the context of normal hard work, this can lead to the tool breaking, causing considerable personal injury. STAHLWILLE spanners To reduce the danger of breakage, we add more material where the greatest loads are to be found and take it away from the places that are not under such stress. In this way, we are able to manufacture extremely sturdy, slim and light tools which also facilitate working in confined spaces due to their compact designs. Load zones in standard-quality spanners Load zones in spanners by STAHLWILLE Extremely resilient, remarkably durable Drop-forged from high-grade special steels Concentrated force More resilient than any screw Optimum hardening in continuous furnaces with no scale build-up or skin decarburisation ings are thinner than conventional rings, facilitating work in confined spaces Gentle quenching in oil Light and easy to handle High resistance to bending and low weight thanks to STAHLWILLEs typical double-t profile Snug-fitting, skin-friendly surfaces thanks to STAHLWILLEs rounded finish Open-jaw spanners in oil Absolutely resistant to bending thanks to the double-t profile 66
3 Strong, extremely tough and durable Quality assured STAHLWILLEs Quality Assurance System was awarded an internationally recognised certificate in accordance with DIN ISO 900 by the DQS (German Association for the Certification of Quality Assurance Systems). This one and the next one: tailored to fit This one and the next one: perfect chrome plating Nm Guaranteed test results STAHLWILLE combination spanners No 3 (open-jaw) , *0 * 4 * * 4 7 Size/thread (M) * eference to older screw thread standards Test results for STAHLWILLE Test results to DIN 899 or ISO 7 Clamping torque for 8.8 screws at 00 % tensile yield strength (μ = 0,4) Nm Guaranteed test results STAHLWILLE combination spanners No 3 (ring) , *0 * 4 * * Test results for STAHLWILLE Test results to DIN 899 or ISO 7 Clamping torque for.9 screws at 00 % tensile yield strength (μ = 0,4) STAHLWILLE No 8 striking face double hex box-spanners are tougher, thinner and higher. Key benefits when tightening and loosening screws Tougher than any screw thanks to the forged double hex. Thinner than conventional rings facilitating work in confined spaces. Higher than standard nuts prevents the spanner jamming on the nut. 67
4 Spanners 0 DIN 30, ISO 00 (metric sizes), Chrome Alloy Steel, chrome plated. Double open ended spanners A L b b a Code mm mm mm mm mm g S x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x a Double open ended spanners A L b b a Code " mm mm mm mm g S /4 x 5 / /6 x 3 / /8 x 7 / /6 x / / x 9 / /6 x 5 / /3 x / /8 x / /8 x 3 / /6 x 3 / /6 x 3 / /4 x 7 / /3 x 3 / /8 x 5 / /6 x /8 x 5 / Sets: Double open ended spanners Content Code No mm/" g /8 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x /9 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x ; x /0 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x ; 4 x 7; 30 x / 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x ; x 3; 4 x 7; 5 x 8; 30 x a/7 /4 x 5 /6; 3 /8 x 7 /6; / x 9 /6; 5 /8 x 3 /4; /6 x 3 /6; 7 /8 x 5 /6; /8 x 5 / a/ /4 x 5 /6; 3 /8 x 7 /6; / x 9 /6; 9 /6 x 5 /8; 9/3 x /6; 5 /8 x 3 /4; /6 x 3 /6; 3 /4 x 7 /8; 5/3 x 3 /6; 7 /8 x 5 /6; /8 x 5 / Standard packing: clear view wallet. 68
5 ES 0/0, 5.5x7 x4 mm TCS 0/0, 6x7 30x3 mm MF 75 x 350 x 60 mm, 0 pieces No 0 sizes 5.5 x 7; 8 x 0; 0 x ; x 3; x 4; 4 x 7; 7 x 9; 8 x ; 9 x ; x 4 mm Empty tray ES 0/0, 6x7 30x3 mm 75 x 350 x 75 mm, 0 pieces No 0 sizes 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x ; 9 x ; 4 x 7; 30 x 3 mm TCS 0/0, 6x7 4x7 mm 75 x 350 x 70 mm, 0 pieces No 0 sizes 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x ; 4 x 7; 30 x 3 mm 8380 Empty tray 8.40 TCS 0/0, 6x7 30x3 mm 350 x 350 x 30 mm, 0 pieces No 0 sizes 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x ; 4 x 7; 30 x 3 mm 75 x 350 x 66 mm, 0 pieces No 0 sizes 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x ; x 4; 4 x 7 mm TCS 0/0, 6x7 4x7 mm MF 75 x 350 x 66 mm, 0 pieces No 0 sizes 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x ; x 4; 4 x 7 mm TCS 0+3+4/ x 350 x 75 mm, 30 pieces No 0 sizes 6 x 7; 8 x 9; 0 x ; x 3; 4 x 5; 6 x 7; 8 x 9; 0 x ; x 4 mm No 3 sizes 6; 7; 8; 9; 0; ; ; 3; 4; 5; 6; 7; 8; 9; ; ; 4; 7; 30; 3 mm No 4 size 0 x mm 69
6 Spanners TCS 0a/9 3 Combination spanners OPEN-BOX P DIN 33 form A/ISO 7738 form A (metric sizes), Chrome Alloy Steel, chrome plated. 75 x 350 x 70 mm, 9 pieces No 0a sizes /4 x 5 /6; 3 /8 x 7 /6; / x 9 /6; 9/3 x /6; 5 /8 x 3 /4; 3 /4 x 7 /8; 5 /3 x 3 /6; 5/6 x; /8 x 5 /6" Plastic-wallets for sets of spanners wallet for set Code No No g / 0/*, 0a/* /0 /0 Pc /5 /5 Pc, a/3 Pc /8 3/8* * Plastic-wallets must be ordered separately! 03/6KH* Clip holder for sets of spanners for set Code No g S / * to be discontinued A L b d a a Code mm mm mm mm mm mm g S
7 3a Combination spanners OPEN-BOX A L b d a a Code " mm mm mm mm mm g S / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / STAHLWILLE AS-Drive The rings of STAHLWILLE combination spanners and double ended ring spanners are equipped with the AS-Drive* profile: this permits high transmission of forces to the lands of nuts and bolts without damaging them. No longer will you have to worry about stripping the corners off nuts and bolts. *Anti-Slip-Drive Sets: Combination spanners OPEN-BOX Content Code No mm/" g /6 3 ) 7; 8; 0; 3; 7; /9 9; 0; ; ; 3; 4; 7; 9; /0KT ) 8; 9; 0; ; ; 3; 4; 5; 7; / 8; 9; 0; ; ; 3; 4; 5; 7; 9; /5 6; 7; 8; 9; 0; ; ; 3; 7; 9; ; 4; 7; 30; /6 ) 7; 8; 9; 0; ; ; 3; 4; 5; 6; 7; 8; 9; ; ; /7 6; 7; 8; 9; 0; ; ; 3; 4; 5; 6; 7; 8; 9; 0; ; /6 ) 6; 7; 8; 9; 0; ; ; 3; 4; 5; 6; 7; 8; 9; 0; ; ; 3; 4; 5; 6; 7; 8; 9; 30; a/8 7/6; /; 9 /6; 5 /8; /6; 3 /4; 3 /6; 7 / a/0KT ) /4; 5 /6; /3; 3 /8; 7 /6; /; 9 /6; 5 /8; /6; 3 / a/0 ) /4; 9 /3; 5 /6; /3; 3 /8; 7 /6; /; 9 /6; 9 /3; 5 /8; /6; 3/4; 5 /3; 3 /6; 7 /8; 5 /6; ; /6; /8; / Standard packing: clear view wallet. (Coloured plastic-wallets: page 70) ) carton with clear view cover ) packed in carton 3 ) in convenient clip holder ES 3/0, 6 5 mm 75 x 350 x 40 mm, 0 pieces No 3 sizes 6; 7; 8; 9; 0; ; ; 3; 4; 5 mm Empty tray
4 IMPACT SOCKETS, BITS
IMPACT SOCKETS, BITS IMPACT SOCKETS, ADAPTOS AND SETS PAGE 58 BITS AND ACCESSOY TOOS PAGE 66 IMPACT DIVE AND SET PAGE 7 IMPACT Sockets, Machine actuated IMPACT Sockets, Machine actuated. STAHWIE IMPACT
More informationmetrinch 83 powerhand eagle Power-start bootgun Tyre seals metrinch power probe
metrinch metrinch power probe Tyre seals bootgun powerhand Power-start RakJak GoJak eagle www.serenco.nl 83 hand tools about metrinch The Difference that Counts A nut or a bolt has flats and corners. The
More informationSockets & Accessories
Sockets & Accessories Sidchrome socket sets give you the choice of socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry
More informationGET PROFESSIONAL, NOW!
NEUE PRODUKTE GET PROFESSIONAL, NOW! 3812-0576 ALLE WERKZEUG-SETS: 3812-0577 WE SUPPORT THE SPORT ALL CATEGORIES COMBINATION SPANNER DIN 3113 form A/ISO 7738 form A 5,5 mm 3812-0277 6 mm 3812-0278 7 mm
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Spanners Catalogue number 4343M, 4345, 4381 & 4382 Date 17/02/2009 Range Description A range of professional quality spanners Features 4343M Hot drop forged
More informationScrewdriving Tools for the Aerospace Segment
Screwdriving Tools for the Aerospace Segment Content Screwdriver Bits 4 Bitholders and Adaptors 28 Combination ratchet wrenches 32 Ratchets 36 Torque Tools 62 Screwdrivers 66 Kraftform Kompakt Tools 79
More informationSockets & Accessories
Sockets & Accessories Sidchrome socket sets give you the choice of socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry
More informationSYSTEM 6 handles. SYSTEM 6 handles.
SYSTEM 6 handles. SYSTEM 6 handles. 284 Ergonomic multi-component handle with roll-off protection. With 6 mm hex retainer. Enables adjustable blade lengths from 42-114 mm. Versatile for general applications
More information604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
More informationTMA - WAW-300B Electro-hydraulic Servo-controlled Universal Testing Machine
TMA - WAW-300B Electro-hydraulic Servo-controlled Universal Testing Machine Ⅰ Equipment name: Computer Control Electro-hydraulic Servo Universal Testing Machine Ⅱ Model:TMA - WAW-300B Ⅲ Usages and characteristics:
More information11. Wall and Floor Mounted Clips
11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete
More information651 EXTRACTOR 670 SCREWED SOCKET HEAD SOCKET SET SCREWS CAP SCREWS. Page Page SOCKET HEAD COUNTERSUNK SCREWS SOCKET HEAD
600 SOCKET HEAD CAP SCREWS 602 SOCKET SET SCREWS Page...........596602 Page.......................603 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS 615
More informationPIPE MANUFACTURERS LIMITED
PROMOTIONAL CATALOGUE a lot more than just pipes PIPE MANUFACTURERS LIMITED Mechanic s Tool Kit 60pc Model No. 679259 5 Tool Inserts & Metal Tray1/2 DRV Socket Set 8-32mm (Duometric) Combination Spanner
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationGoTo Europe Focused Delivery Program
GoTo Europe Focused Delivery Program Product Produktübersicht Overview Lineartechnik Motion Technology 2 GoTo Europe The products I need when I need them In today s global competition every day counts.
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationRobust Clamps Shock-proof load range
Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific
More informationCORDLESS SYSTEMS. Hilti. Outperform. Outlast.
CORDLESS SYSTEMS. Hilti. Outperform. Outlast. Cordless Systems with Ll-Ion SFC 14-A Page 067 Accessories and Consumables Page 068 SFH 22-A Page 069 SID 14-A Page 070 Accessories Page 071 SIW 14-A Page
More informationSuperstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart
Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance
More informationQ2 XBee Handheld Controller Assembly Guide
Q2 XBee Handheld Controller Assembly Guide Copyright Quantum Robotics Inc. Q2 Controller V1.0 1 Parts List: The kit comes with 14 individual bags. 1. Case Top and Bottom 2. Case Screw Package containing:
More informationPT 0606 Price Revision, May 2013 INDUSTRIAL POWER BITS NUTSETTERS BIT HOLDERS SCREWDRIVERS TOOL KITS
PT 0606 Price Revision, May 203 a division of The Hillman Group Canada ULC Quality Tools INDUSTRIAL POWER BITS NUTSETTERS BIT HOLDERS SCREWDRIVERS TOOL KITS Pro-Tip Manufacturing, a division of H. Paulin
More informationMICROPHONE stands & accessories
MICROPHONE stands & accessories 03 Microphone Stands & Accessories 300 SERIES MICROLITE MICROPHONE STANDS - Constructed with strong, lightweight Microlite tubular steel - Fast, smooth, non-slip boom swivel
More informationSCREWED ELECTRO GALVANISED CONDUIT CLASS 3. AS/NZ CONDUIT ELECTRO GALVANISED ( 4 M LENGTHS ) CONDUIT HOT DIP GALVANISED ( 4 M LENGTHS )
SCREWED ELECTRO GALVANISED CONDUIT CLASS 3. AS/NZ 2053.7 CONDUIT ELECTRO GALVANISED ( 4 M LENGTHS ) COND20GAL COND25GAL COND32GAL COND40GAL COND50GAL 20 mm Electro Galvanised 4 metre 25 mm Electro Galvanised
More information. 0 Insert Made Cat.-Nr
Hand tools. Insert Made Cat.-Nr. 963-969 Bicolour insert made of polyethylene (PE), colour black/blue. Resistant against most oils and chemicals thanks to closed-cell design. Contrasting colour and precisely
More informationMarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
More informationMarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
More informationRCC45 ➁ Overview / /
RCC45 ➁ Overview 010.2936 More future and modularity Integration of POF and power Guaranteed modularity Long-term investment protection Flexible cabling solution Fast and convenient installation 1 010.2721
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationSTORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
More informationSit-Stand Monitor Arm
Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationSpanners wrenches. Handsaws 1
Spanners wrenches sockets Handsaws 1 2 Concrete saw & mitre saws + boxes INDEX SPANNERS DOUBLE open DOUBLE RING RATCHET wrenches KRT501001 -> KRT501011 COMBINATION KRT501101 -> K R T501111 OPEN/RATCHET
More informationCutter Option Installation Instructions
This kit includes the parts and documentation necessary to install the cutter option on the Zebra XiII, XiIII, and XiIIIPlus-Series printers. NOTE: The Cutter Option is not available for the 96XiIII. Adding
More informationInch Dial Test Indicators Lever Type see page 97.
Dial Test Indicators Most modern methods are applied in the production of our high quality Dial Test Indicators. They are both sensitive and shock-resistant. Here are some of the advantages applicable
More informationPurchase an Interchangeable Head Torque Wrench and receive a FREE Ratcheting Square Drive Head.
Sales Blaster Purchase an Interchangeable Head Torque Wrench and receive a FREE Ratcheting Square Drive Head. Interchangeable Head Torque Wrenches These interchangeable torque wrenches are designed for
More informationPremium Drillpipe. for Optimal Performance
Premium Drillpipe for Optimal Performance DRILCO offers a full line of premium drillpipe available in a variety of sizes with API and non-standard wall thickness to deliver optimal torque, weight, and
More informationNEW CAPTIS CLAMPING SYSTEM. The modular and flexible system for internal and external clamping
NEW CAPTIS CLAMPING SYSTEM The modular and flexible system for internal and external clamping CAPTIS CLAMPING SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationLaboratory Clamps and Supports
Laboratory Clamps and Supports Benchclamps 2 Laboratory Clamps Multi-Purpose Benchclamp Heavy-Duty Clamps grip adjustment range Single or dual adjust Available in three sizes; small, medium, and large
More informationSIMATIC Ident RFID systems MDS D423 Compact Operating Instructions
SIMATIC Ident RFID systems Compact Operating Instructions Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to
More informationStandard Releasing Spear. Manual B215
Standard Releasing Spear Manual B215 NOTES Contents Standard Releasing Spear Overview... 2 Use... 2 Construction... 2 Illustrations Spear Assembly with Flush-Type Mandrel... 3 Spear Assembly with Shoulder-Type
More informationHIT E VARIO. Workshop Trolleys Accessories MTS-Modules Tool Assortments. Become a MATADOR.
VARIO. Workshop Trolleys Accessories MTS-Modules Tool Assortments Become a MATADOR. VARIO Workshop Trolley xccasca info From an idea to a new standard. VARIO. Our new top modell VARIO is entirely newly
More informationZyklop. The next generation!
Zyklop. The next generation! More and more, users are demanding tools that are suitable for confined working spaces. Machinery and workpieces are becoming increasingly more compact, and this means that
More informationSpring type tools in top quality "Made in Germany" - made by LAMATOR
1 Table of Contents Spring type tools in top quality... 3 TURBO Shot peening using a certified shot peen material... 4 Harrow Tines... 5 Formed S-Tines 1¼... 6 Formed S-Tines 1¼... 7 Formed S-Tines 1¾...
More informationFASTener DRIVES & screwdriving
FASTener DRIVES & screwdriving 17 IMPACT PERFORMANCE SERIES FOR MAXIMUM DURABILITY AND LONG LIFE Based on the increasing popularity and frequency of use of impact drivers on the jobsite, IRWIN offers a
More informationISLAMORADA CARTON 1 CARTON 2 CARTON 3. Description Part No x 52 GRAY SAWGRASS WALL
CARTON 1 ISLAMORADA Part # 420832-11 ROUND PACKING LIST Description Part No. 8 21 24 27 30 33 8 x 52 GRAY SAWGRASS WALL 1449 1 - - - - - - - - x 52 GRAY SAWGRASS WALL 1450-1 - - - - - - - x 52 GRAY SAWGRASS
More informationSimply the best fixation. 3D articulated arms Innovative high-quality products
Simply the best fixation. 3D articulated arms Innovative high-quality products 02 Method of operation 04 Measurement Strato Line Base Line Strato µ-line Classic Line Strato set with carrying case Individual
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
More informationUniversal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
More informationRATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationDistribution Systems for Sensors and Actuators
Distribution Systems for Sensors and Actuators Comprehensive OVERVIEW M12 Distribution Boxes M8 Distribution Boxes Accessories Distribution Systems for sensors and actuators THE RIGHT DISTRIBUTION BOX
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationAX SERIES EDDY CURRENT PROBES eddy-current sensors with an waterproof and pressure-tight, high resolution analog elektronics.
DATASHEET AX SERIES EDDY CURRENT PROBES eddy-current sensors with an waterproof and pressure-tight, high resolution analog elektronics. 1 and 2 channel drivers Sensor protection class IP68 Driver protection
More informationContents. Page 2 TRCTFP101
Contents CHAINS SPZ-SPA-SPB-SPC Profile Selection 3 Taper Bore SPZ 4-7 Taper Bore SPA 8-10 Taper Bore SPB 11-14 Taper Bore SPC 15-17 Taper Bushes 18-19 Taper Bushes - Metric 20-23 Taper Bushes - Imperial
More informationSection 9. Corporation EDI
Corporation Strip Socket Storage Racks See page 11 Stubby Clips See page 11 SAE 12-Point Socket Adapter Set See page 1 Reversible Ratcheting Kit See page 3 Empty Plastic Socket Holder See page 11 Section
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationData Sheets Wiring Components. Fanning Strips. Guide Rings and Holder. Guide Hooks. Spacer Bars. Dummy Plates. Contact. Christian Jaramillo-Arriagada
Data Sheets Wiring Components Fanning Strips Guide Rings and Holder Guide Hooks Spacer Bars Dummy Plates Contact Fax: 0621 683206777 Fanning Strips Wiring Components For a clear connecting arrangement
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More informationIS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
More informationSOCKET WRENCH SET SOCKET WRENCH SET SOCKET WRENCH SET SOCKET SET SOCKET WRENCH SET IMPACT SOCKET SET SOCKET WRENCH SET SOCKET WRENCH SET
SOCKET & SOCKET B-05-035 0347-0 75 pcs DR Socket Wrench Set SAE & MM : 12 pc 6pt 1/4 SAE Socket:5/32-1/2, 3 pc 8 pt 1/4 SAE Socket: 1/4-3/8, 13 pc Metric Socket: 4-13mm, 3 pc 3/8 SAE Socket: 7/16, 1/2,
More informationS. S. Bari 1, D. H. Burande 1, M.R. Birajdar 2
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN(e) : 2278-1684, ISSN(p) : 2320 334X, PP : 39-43 www.iosrjournals.org Design and Analysis of Barrel Coupling S. S. Bari 1, D. H. Burande
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
More informationPlate. Channels - Standard Structural* Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue.
Channels - Standard Structural* Grades Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue. A Depth B Flange Width C Web Thickness Estimated Weight - Lbs. Lbs/Foot
More informationSliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationAssembly & Installation Guide ULTIMAKER 2.85/3.0
Assembly & Installation Guide ULTIMAKER 2.85/3.0 The Bondtech QR Extruder for 2.85/3.0 mm filament for use as a Bowden or a direct Extruder. The extruder uses high-quality industrial pneumatic push-fit
More informationTechnical Data Sheet Screw Clamps and Universal Clamps
Technical Data Sheet Screw Clamps and Universal Clamps Stepless Screw Clamps PG 178 2 PG 178 for small diameters PG 178 for big diameters Bridge Tongue-in-groove design Interlock with multiple diameter
More informationYOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.
- and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous
More informationSwitches Unlimited Contact: Fax: GENERAL SPECIFICATIONS
Series HS TS PS 00--0 Fax: --0 Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Indexing: Contact Timing:
More informationParts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
More informationSAFETY EQUIPMENT EARTHING AND SHORT-CIRCUITING DEVICES angled, ball Ø20 or 25 mm EN/IEC (DIN VDE 0683 Part 100) and DIN Part 1
Points Installation Storage Phase and Earthing Points ball points, straight and angled, ball Ø20 or 25 mm EN/IEC 61230 (DIN VDE 0683 Part 100) and DIN 48088 Part 1 Suitable for fixing cable lugs or connecting
More informationCatalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
More informationMicroTorque Handheld screwdrivers
MicroTorque Handheld screwdrivers MICROTORQUE HANDHELD SCREWDRIVERS G User friendly, ergonomic and productivity boosting The Microtorque Handheld Screwdriver range is the most advanced tightening solution
More informationRider AMP TM. Parts Manual. Model In. S.D. Deck /09 Printed in USA
AMP TM Parts Manual Rider Model 900 -In. S.D. Deck 0800 /09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More informationBall and Socket Shafts Series 0.800
Ball and Socket Shafts Series 0.0 Ball and Socket Shafts Series 0.0.1 Size 0..9 Md max Nm double, with length compensation, Standard bore Spline profile Standard bore Spline profile Standard bore When
More informationBS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525
Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16
More informationImage Name Product Code Product Description Price (NZD) Weight Packaging Dimensions
Image Name Product Code Product Description Price (NZD) Weight Packaging Dimensions SkyJib-X4 Ti-QR Retractable Airframe Kit 4905-4000 The SkyJibs are the Aeronavics Signature Pro Camera Ships purposefully
More informationBTL. Taper bushing A. PLATE SPROCKET REBORE TO "G"DIMENSION. WELD TAPER WELD. ON HUB TAPER SPROCKET
is a new type of component used for joining mechanical transmission. It changed from the traditional design and now features easy-on, easy-off construction and high standardization. The grip is tightened
More informationClean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging
eries LQ Options Panel mounting nut LQ U Applicable fitting LQN P Applicable fitting LQ LQ Application For LQ For LQ insert bushing Clean packaging M. tandard packaging M. The U type is recommended when
More informationProducts Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable
More informationProduct Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications
Product Information ECN 1324S EQN 1336S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications 112015 ECN 1324S, EQN 1336S Rotary encoders for absolute position values with
More informationCable entry systems for potentially explosive atmospheres
Cable entry systems for potentially explosive atmospheres Directive 94/9/EC (ATEX) ATEX stands for ATmosphère Explosible and is the short name for the European Directive 94/9/EC, regulating the market
More informationMechanical and adapters
Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Expansion chucks and adapters E X P A N S I O N U N I T
More informationMicroLab Posts, Bases, and Rails
MicroLab Posts, Bases, and Rails www.mellesgriot.com Stable mounting and positioning are required to build optical systems. In the laboratory, posts and post holders are commonly used for mounting optical
More informationEZ-9000 Tape Dispenser, EZ-9000-RP Tape Dispenser Part Number / MAY 2012 REV 1.0
PLEASE NOTE Some of the part numbers are now different depending on when the unit was manufactured. The drawing will note where the appearance is different and the parts list will give you the correct
More informationselos The Wieland Terminal. selos New Generation Wieland Electric, inventor of the safe connection. Fast on the Rail
The Wieland Terminal. selos New Generation Wieland Electric, inventor of the safe connection. Fast on the Rail selos DIN rail terminal blocks with screw connection Reliable connection, proven concept!
More informationM12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationQuick Coupling Products
Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION
More informationHead office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
More informationMBE Mounts and Adapters
MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking
More informationPT 0606 October, 2007 INDUSTRIAL POWER BITS NUTSETTERS BIT HOLDERS SCREWDRIVERS TOOL KITS
PT 0606 October, 2007 ISO 900:2000 Certified Division of H. Paulin & Co. Limited Quality Tools INDUSTRIAL POWER BITS NUTSETTERS BIT HOLDERS SCREWDRIVERS TOOL KITS Pro-Tip Manufacturing, a division of H.
More informationStandard Size Rotaries Series HS TS PS
Standard Size Rotaries Series HS TS PS GENERAL SPECIFICATIONS Electrical Capacity Resistive Load: Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical
More informationPassive Connectivity Overview
Passive Connectivity Overview Distribution Boxes T-Splitter Field Wired Cables Valve COMPREHENSIVE AND CONVENIENT Murrelektronik Passive Connectivity Solutions In today s highly competitive landscape,
More informationLetter & Number Stamps. 6 Wheel Number Punch PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR. Hand Stamp Sets
560 PUNCHES & STAMPS Hand Stamps Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece. Positive Indent (Standard) Hand Stamp Sets Set Description
More informationVision Rx Lab. Presented by:
Presented by: Importance of spectacles in today s world... We ve been recalibrated to a high-definition world. We need to read 10-page documents on our smart phones. Our TVs show us every blade of grass
More informationEncoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
More informationspinner Measurement & Calibration equipment for network analyzers
spinner Measurement & Calibration equipment for network analyzers Edition B 2011 High Frequency Performance Worldwide www.spinner-group.com SPINNER test & calibration equipment for best measurement results
More information