5 EFECTIVE FLEXIBLE SEAT SEAL 6 FIRE SAFE BODY SEAL

Size: px
Start display at page:

Download "5 EFECTIVE FLEXIBLE SEAT SEAL 6 FIRE SAFE BODY SEAL"

Transcription

1

2 Stem Top of ACEC type Opened Our stem Design Anti-static Device Stem earing all Stem Closed Gland Packing ody ack Seat Stem Flange Stem Top of Ordinary type Opened Ordinary Stem Design Stem Employed in the stem-sliding portion are the Inteqral stem bearing and thrust bearing, which made of Teflon as a base material. Therefore,galling is completely prevented while keeping the operational torque at the minimum level. all Gush Out of the Fluid Media. ady Opened Stem Top ever position ever position ACEC OVA stem head offer accurate valve position indication, prevent wrong operation which will be happened on square stem head. ever can be fitted with square stem head at any direction will cause operator does not always be cleared about valve current position. OVA only allow lever be parallel to pipe when valve is opened, and vertical to pipe, when valve is closed. CORRECT EVER OPERATOR OW-OUT PROOF UNIQUE EARING ANTI-STATIC DEVICE Stem When the pressure running through the valve and has risen in body cavity, the stem may is blew out. To prevent the stem from being blew out by inner pressure, the valve stem is provided with flange at lower position. The stem flange also stop some leakage from gland packing by contacting with body back seat in case of stem bearing and gland packing are burned out in fire. The unique design stem bearing which is integral with thrust washer, offer excellent operation of valves, the stem bearing strength the movement be more smooth, centric and free of friction or stuck between stem and body. Anti-static device has been provided as standard device of ACEC A VAVE. The device can prevent electro-static sparks from resulting in inflammation, while operate the valves in petrolic and chemical plants. EFECTIVE FEXIE SEA The unique seat design is much flexible than traditional solid one. It's high capability of sealing against either high or low pressure as well as vacuum. The downstream seal is flexible sealing according to fluid pressure. ODY SEA Two kind of body seal are offered by ACEC. If gasket material is, VITION or R., the secondary metal seal will be offered for fire safe purpose. The metal seal will stop leakage in case of gasket is burned in fire. Downstream Seat all Fluid Pressure Seat Original Form Spiral wound Graphoil Gasket Gasket Metal Touch The another one design offer spiral wound graphoil gasket which is excellent material for fire safe. The metal seat is not necessary under this design. SEA ACEC A VAVE provide graphoil gland packing as standard which is durable in fire case. META The non-metal seat may is burned out in a fire, and excessive leakage will result, so that the fire will gain headway. To prevent such situation from arising, ACEC A VAVE is provided with a fire safe seat mechanism. Once the seat has been burned out at close position, the ball would be pushed toward secondary metal seat directly by upstream pressure, and stop leakage. ACCURATED ODY AND A All ACEC A VAVE components are machined on CNC. Real round & good polished ball create accurate sealing & light torque. OCING DEVICE ocking device is standard of ACEC A VAVE. This device can prevent the valve from wrong operation or unqualified person operation. Downstream Seat Seat seat burned out all Metal to metal Seal (Fire-safe) Upstream all Metal seats are provided on both upstream and downstream sides. Downstream A-0 ACEC FOATING A VAVE ACEC FOATING A VAVE A-0

3 PCS ODY - FOATING A - CASS 00&00 - NPT PCS ODY - FOATING A - CASS 00&00 - SW&W W ENDS l API 0 API FA/0 TREAD ENDS-NPT ANSI.. ANTI-STATIC & OWOUT-PROOF l SOCET WED ENDS-SW UTT WED ENDS-W API 0 API FA/0 ANSI. ANSI. ANTI-STATIC & OWOUT-PROOF MATERIA IST MATERIA IST ODY COSURE A EVER GAND ODY SEAS GAND PACING TRUST WASER SPRING WASER NAME PATE A F0 F0 F F A A F0 A F0 A F A F A A F0 A F0 A F A F AF0 AF0 AF AF MONE ASTEOY ATP0 ATP0 ATP ATP MONE ASTEOY CARON STEE A TP A TP +CARON DERIN NYON DEVON PEE GRAPOI META +CARON VITON GRAPOI +CARON VITON GRAPOI +CARON CARON CARON STEE 0SS SS CARON STEE CARON STEE ODY COSURE A EVER GAND ODY SEAS GAND PACING TRUST WASER SPRING WASER NAME PATE A A A F0 A F0 A F0 F0 A F0 A F0 F A F A F F A F A F AF0 AF0 AF AF MONE ASTEOY ATP0 ATP0 ATP ATP MONE ASTEOY CARON STEE A TP A TP +CARON DERIN NYON DEVON PEE GRAPOI META +CARON VITON GRAPOI +CARON VITON GRAPOI +CARON CARON CARON STEE 0SS SS CARON STEE CARON STEE DIMENSION-FU ORE-AT&AT DIMENSION-FU ORE-AS-AS-A-A /" /" /" /" " -/" -/" " /" /" /" /" " -/" -/" " DIMENSION-REDUCE ORE-RAT&RAT DIMENSION-REDUCE ORE-RAS&RAS-RA&RA /" X /" /" X //" " X /" -/" X " -/" X-/" " X -/" /" X /" /" X //" " X /" -/" X " -/" X-/" " X -/" A-0 ACEC FOATING A VAVE ACEC FOATING A VAVE A-0

4 PCS ODY-FOATING A - CASS 00&00 - NPT PCS ODY - FOATING A - CASS 00&00 - SW&W W ENDS ODY COSURE A EVER GAND ODY SEAS GAND PACING TRUST WASER SPRING WASER OT/ NAME PATE /" 0 /" 0 l A A F0 A F0 F0 A F0 F A F F A F ODY COSURE A A A F0 A F0 A F0 F0 A F0 A F0 F A F A F F A F A F A A F0 A F0 A F A F A AF0 AF0 AF AF MONE ASTEOY AF0 AF0 AF AF MONE ASTEOY ATP0 ATP0 ATP ATP MONE ASTEOY EVER ATP0 ATP0 ATP ATP MONE ASTEOY CARON STEE CARON STEE GAND A TP A TP A TP A TP A TP +CARON DERIN NYON DEVON PEE GRAPOI META +CARON VITON GRAPOI +CARON VITON GRAPOI +CARON CARON CARON STEE 0SS SS ODY SEAS GAND PACING TRUST WASER SPRING WASER +CARON DERIN NYON DEVON PEE GRAPOI META +CARON VITON GRAPOI +CARON VITON GRAPOI +CARON CARON CARON STEE 0SS SS A-/A- CARON STEE A-/A- A-/A- A-/A- A-/A- OT/ A-/A- CARON STEE A-/A- A-/A- A-/A- A-/A- CARON STEE NAME PATE CARON STEE /" /" MATERIA IST DIMENSION-FU ORE-AT&AT " 0 -/" 0 -/" 0 " 0 -/" 0 00 API 0 API FA/0 TREAD ENDS-NPT ANSI.. ANTI-STATIC & OWOUT-PROOF " /" 0 DIMENSION-FU ORE-AS&AS-A&A /" 0 /" /" MATERIA IST " 0 -/" 0 SOCET WED ENDS-SW UTT WED ENDS-W -/" 0 ANTI-STATIC & OWOUT-PROOF " 0 -/" 0 00 API 0 API FA/0 ANSI. ANSI. " DIMENSION-REDUCE ORE-RAT&RAT DIMENSION-REDUCE ORE-RAS&RAS-RA&RA /" X /" 0 /" X //" " X /" /" X " 0 -/" X-/" 0 " X -/" 0 -/" X" 0 " X " 0 00 /" X /" 0 /" X //" " X /" /" X " 0 -/" X-/" 0 " X -/" 0 -/" X" 0 " X " 0 00 A- ACEC FOATING A VAVE ACEC FOATING A VAVE A-

5 PC SIDE ENTRY ODY - FOATING A CASS RF PC ODY-FOATING A - CASS RF /" /" CASS 0 DIMENSION-FU ORE-AF " -/" -/" " -/" " " " " " " CASS 0 DIMENSION-REDUCE ORE-RAF /"x/" /"x/" "x/" -/"x" -/"x-/" "x-/" -/"x" "x" "x" "x" "x" "x" 0 "x" "x" CASS 00 DIMENSION-FU ORE-AF /" /" " -/" -/" " -/" " " " " GEAR OPERATOR l FANGE ENDS FACE TO FACE API 0 API FA/0 ANSI. ANSI. ANTI-STATIC & OWOUT-PROOF /"x/" /"x/" 0 CASS 00 DIMENSION-REDUCE ORE-RAF "x/" -/"x" -/"x-/" "x-/" -/"x" "x" "x" "x" "x" "X" 0 0 MATERIA IST WC CF CF CFM CFM RONZE ODY AGr. WC AGr. CF AGr. CF AGr. CFM AGr. CFM ADAPTER AGr. WC AGr CF AGr CF AGr. CFM AGr. CFM ATP0 ATP0 ATP ATP MONE ASTEOY CASS 00 DIMENSION-FU ORE-AF A ACF ACFM ACF ACFM MONE ASTEOY +CARON DERIN NYON DEVON PEE GRAPOI META /" /" " -/" " -/" " " GAND PACING +CARON VITON GRAPOI 0 GASET TRUST WASER DISC SPRING CARON STEE +CARON VITON GRAPOI +CARON CARON SPRING 0 00 A GAND Cr A TP A TP CASS 00 DIMENSION-REDUCE ORE-RAF GAND STOP PATE CARON STEE CARON STEE CARON STEE /"x/" /"x/" "x/" -/"x-/" "x-/" -/"x" 0 "x" "x" "x" EVER CARON STEE DUCTIE IRON 0 OCING PATE CARON STEE A- ACEC FOATING A VAVE ACEC FOATING A VAVE A-

6 PCS ODY - FOATING A - CASS 0 TO 00 - RF PCS ODY - FOATING A - CASS 0 TO 00 - RF DIMENSION OF ANSI VAVE CASS 0-FU ORE-AF /" /" " -/" -/" " -/" " " " " " " " FORGED MATERIA IST FANGE ENDS FACE TO FACE API 0 API FA/0 ANSI. ANSI. ANTI-STATIC & OWOUT-PROOF 0 CASS 0-REDUCE ORE-RAF /"x/" /"x/" "x/" -/"x" -/"x-/" "x-/" -/"x" "x" "x" "x" "x" "x" "x" "x" "x" 0 00 ODY A A F0 A F0 F0 A F0 F A F F A F CASS 00-FU ORE-AF COSURE A EVER A A F0 A F0 A F A F AF0 AF0 AF AF MONE ASTEOY ATP0 ATP0 ATP ATP MONE ASTEOY CARON STEE /" /" " -/" -/" " -/" " " 0 0 " " 0 0 " 0 0 GAND ODY SEAS A TP A TP A TP +CARON DERIN NYON DEVON PEE GRAPOI META +CARON VITON GRAPOI GAND PACING TRUST WASER SPRING WASER +CARON VITON GRAPOI +CARON CARON CARON STEE 0SS SS CASS 00-REDUCE ORE-RAF /"x/" /"x/" "x/" -/"x" -/"x-/" "x-/" -/"x" "x" "x" "x" "x" "x" "X" OT/ NAME PATE A-/A- CARON STEE CARON STEE A-/A- A-/A- A-/A- A-/A WC CAST MATERIA IST CF CF CFM CFM CASS 00-FU ORE-AF 0 0 CASS 00-REDUCE ORE-RAF ODY COSURE A EVER GAND AGr.WC AGr.WC AGr.CF AGr.CF AGr.CF AGr.CF AGr.CFM AGr.CFM AGr.CFM AGr.CFM AGr.CF AGr.CF AGr.CFM AGr.CFM MONE ASTEOY ATP0 ATP0 ATP ATP MONE ASTEOY CARON STEE A TP A TP A TP +CARON DERIN NYON DEVON PEE GRAPOI META /" /" " 0 -/" " -/" 0 0 " 0 " 0 00 /"x/" /"x/" "x/" -/"x-/" "x-/" -/"x" 0 "x" 0 "x" 0 "x" 0 00 ODY SEAS GAND PACING TRUST WASER SPRING WASER OT/ A-/A- CARON STEE +CARON VITON GRAPOI +CARON VITON GRAPOI +CARON CARON CARON STEE 0SS SS A-/A- A-/A- A-/A- A-/A- CASS 00/00-FU ORE-AF/AF /" /" " -/" " 0 CASS 00/00-REDUCE ORE-RAF/RAF /"x/" /"x/" "x/" -/"x-/" "x-/" 0 -/"x" NAME PATE CARON STEE A- ACEC FOATING A VAVE ACEC FOATING A VAVE A-

7 PCS SPIT ODY - FOATING A - CASS PN///0 - RF PCS SPIT ODY - FOATING A - CASS PN///0 - DIMENSION DIMENSION OF ANSI VAVE CASS 0-FU ORE-AF /" /" " -/" -/" " -/" " " " " " " " OCING DEVICE CASS 0-REDUCE ORE-RAF /"x/" /"x/" "x/" -/"x" -/"x-/" "x-/" -/"x" "x" "x" 0 "x" 0 "x" 00 "x" 00 "x" 00 "x" 00 "x" l CASS 00-FU ORE-AF CASS 00-REDUCE ORE-RAF GEAR OPERATOR /" /" " -/" -/" " -/" " " " " " /"x/" /"x/" "x/" -/"x" -/"x-/" "x-/" -/"x" "x" "x" "x" "x" "x" "X" FANGE ENDS FACE TO FACE API 0/DIN API FA/0/S ANSI./DIN ANSI./DIN CASS 00-FU ORE-AF CASS 00-REDUCE ORE-RAF /" /" " -/" " -/" " " /"x/" /"x/" "x/" -/"x-/" "x-/" -/"x" "x" "x" "x" ANTI-STATIC & OWOUT-PROOF MATERIA IST PARTS WC CF CF CFM CFM RONZE ODY ADAPTER AGr. WC AGr. WC AGr. CF AGr CF AGr. CF AGr CF AGr. CFM AGr. CFM AGr. CFM AGr. CFM DIMENSION OF DIN VAVE-PN ///0 A ATP0 ATP0 ATP ATP MONE ASTEOY ACF ACF ACFM ACFM MONE ASTEOY SORT PATTERN-FU ORE-PO/P/P/P AF SORT PATTERN-REDUCE ORE-PO/P/P/P RAF +CARON DERIN NYON DEVON PEE GRAPOI META /" /" " -/" " -/" " " " " " /"x/" /"x/" "x/" -/"x-/" "x-/" -/"x" "x-/" "x" "x" "x" "x" GAND PACING GASET TRUST WASER OT AGr. +CARON VITON GRAPOI +CARON VITON GRAPOI +CARON CARON AGr. AGr. AGr. AGr. AGr AGr. AGr. AGr. AGr. AGr. AGr SPRING A GAND Cr A TP A TP A TP ONG PATTERN-FU ORE-PO/P/P/P AF /" /" " -/" " -/" " " " " ONG PATTERN-REDUCE ORE-PO/P/P/P RAF /"x/" /"x/" "x/" -/"x-/" "x-/" -/"x" "x-/" "x" "x" "x" GAND FANGE AGr. WC AGr. CF AGr. CF AGr. CFM AGr. CFM GAND OT CARON STEE OCING PATE EVER CARON STEE CARON STEE DUCTIE IRON A- ACEC FOATING A VAVE ACEC FOATING A VAVE A-

8 PC SIDE ENTRY ODY - FOATING A - PN - WAFER PC ODY - FOATING A - 00psi - SPT&NPT A EX ODY ODY INSERT A TRUST WASER F0 AF0 ASI 0 AF0 ATP0 CF A-CF ASI 0 A-CF ATP0 F AF AF ATP CFM A-CFM A-CFM ATP /" 0. DIMENSION-REDUCE ORE-RAT /" /" /" 0 " -/" -/" " PACING GAND EVER ATP0 ATP0 ATP0 ATP0 ATP ATP0 ATP ATP0 FANGE ENDS FACE TO FACE DIN DIN DIN DIN WASER PCS ODY - FOATING A - 00psi - SPT&NPT ANTI-STATIC & OWOUT-PROOF ODY WC AGr. WC MATERIA IST CF CF AGr. CF AGr. CF CFM AGr. CFM CFM AGr. CFM RONZE ODY COSURE WC A-WC A-WC CF A-CF A-CF CFM A-CFM A-CFM ADAPTER AGr. WC AGr CF AGr CF AGr. CFM AGr. CFM A A-CF A-CF A-CFM A GAND PACING GASET TRUST WASER DISC SPRING SPRING ATP0 ATP0 ATP ATP MONE ASTEOY ACF ACFM ACF ACFM MONE ASTEOY +CARON DERIN NYON DEVON PEE GRAPOI META +CARON VITON GRAPOI +CARON VITON GRAPOI CARON STEE +CARON CARON /" DIMENSION-FU ORE-AT /" /" /" " -/" -/" " 0 -/" " 0 TRUST WASER PACING GASET GAND SPRING WASER EVER ATP0 ATP0 ATP0 ATP0 ATP ATP A Cr 0 0 OC DEVICE GAND GAND CARON STEE A TP A TP PCS ODY - FOATING A - 00psi - SPT&NPT&SW&W CARON STEE STOP PATE EVER CARON STEE DUCTIE IRON CARON STEE DIMENSION ODY COSURE A WC A-WC A-WC A-CF CF A-CF A-CF A-CF CFM A-CFM A-CFM A-CFM ATP0 ATP0 ATP OT /" /" " -/" -/" " -/" " " " " " NEX OT WASER DIMENSION-FU ORE-AT-AS-A /" /" /" /" " -/" -/" " -/" " " TRUST WASER PACING GAND EVER ATP0 ATP0 ATP SPRING WASER OC DEVICE A- ACEC FOATING A VAVE ACEC FOATING A VAVE A-

9 FOATING A - CRYOGENIC AND INSUATION PURPOSE CASS RF OPTIONA DEVICES FOR A VAVE IVE OADING MOTOR OPERATED CAIN OPERATOR SPIT ODY GEAR OPERATOR FANGE ENDS FACE TO FACE API 0/S API FA/0/DIN ANSI./DIN ANSI. IMIT SWITC PISTON OPERATED OCING DEVICE OPEN ODY TYPE PCS ODY-NPT-SW-W PCS ODY-NPT-SW-W PC ODY-RF PCS ODY-RF INNER WA POIS CAVITY FIER INTEROC DEVICE EY EY A MATERIA IST CF CF CFM CFM RONZE EXTENSION PIPE AF0 AF0 AF AF EXTENSION ATP0 ATP0 ATP OTER PARTS' MATERIAS ARE REFERED TO ORIGINA PAGE EXTENSION ENGT FOR CRYOGENIC SERVICE ATP A TYPE MATERIA +%CARON /" /" " 0 FOR INSUATION SERVICE /" /" " /" 0 -/" 0 " 0 " 0 -/" -/" 0 " " 0 " " 0 " " 0 " " 0 " " 0 " 0 " 0 V-PORT A-SEGMENT V-PORT A SEGMENT DERIN DEVON PEE GRAPITE META ARDFACING NYON OTER EXTENSION ENGT IS AVAIAE ON REQUEST. A- ACEC FOATING A VAVE ACEC FOATING A VAVE A-

10 POYMERIC/FIRESEA S CARON GRAPITE, META & CERAMIC S Temperature o C Temperature o C Class Class Pressure psig Class Pressure bars Pressure psig Class 00 Class Pressure bars Class Class Temperature o F 00 0 Class CARON STEE - ODY RATING Temperature o F STAINESS STEE - ODY RATING - IMIT R- - IMIT - - FIRE - SEA PEE- IMIT-N-FIRE-SEA CARON GRAPITE (OXIDIZING) CARON GRAPITE (N-OXIDIZING) CARON GRAPITE IMIT (OXIDIZING) STEITE CERAMIC S CARON GRAPITE IMIT (N-OXIDIZING) CARON STEE - ODY RATING STAINESS STEE - ODY RATING STEITE IMIT A- ACEC FOATING A VAVE ACEC FOATING A VAVE A-

11 REA TOQUE IN NM g/cm g/cm 0 g/cm g/cm Values for virgin, with clean water at ambient temperature. reak torque is highly influenced by the frequence of operation, increasing its value about 0% Mafter long periods of inactivity. Working with non-lubricant fluids (ex. g.: gases, kerosene) these values can also increase up to 0%. Cv VAUE DN /" /" " -/" -/" " -/" " " " " " " " Full bore 0 0 Reduced bore A- ACEC FOATING A VAVE

FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2

FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2 BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.

More information

Item 620A Multi-Way Sanitary Ball Valve

Item 620A Multi-Way Sanitary Ball Valve R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel

More information

Pig Valves Complete Solutions for Industrial Valves. jagflo.com

Pig Valves Complete Solutions for Industrial Valves. jagflo.com Pig Valves Complete Solutions for Industrial Valves Cat.no.:E-PV-00 Introduction ~ Quality Commitment How to Order Product Introduction Material Specifications Working Sequences Design Feature Dimensions

More information

MultiPort Ball Valves

MultiPort Ball Valves Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort

More information

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable. SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend

More information

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T

More information

1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA

1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: (

More information

Item 110F Top-Entry Flanged Ball Valve

Item 110F Top-Entry Flanged Ball Valve Item 0F op-entry Flanged Ball Valve ANSI/ PN / ANSI00/ PN 0 SIZE: /"-" SPECIFICAION * Body & end caps quality investment casting * Available in stainless steel or carbon steel * with ISO direct mounting

More information

WAFER TYPE BUTTERFLY VALVE Z 011-A

WAFER TYPE BUTTERFLY VALVE Z 011-A WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA Nominal diameter: Face-to-face: EN Series (DIN 0 T3 ) ISO Series API 0 Table BS Series Flange accommodation: DIN PN // ANSI B., Class MSS SP Class AWWA C AS

More information

1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA

1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01

More information

HIGH PRESSURE FORGED STEEL VALVES ILSHIN VALVE CO., LTD.

HIGH PRESSURE FORGED STEEL VALVES ILSHIN VALVE CO., LTD. C- Rev. HIGH PRESSURE FORGED STEE VAVES ISHIN VAVE CO., TD. To be the most competitive edge designer and manufacturer over the world. Satisfy customers with best quality, delivery and price. ESTABISHMENT

More information

Mark 79/79MX Series. Control Valves Mark 79/79MX Three-Way Control Valves. Three-Way Control Valves. Operation. Features

Mark 79/79MX Series. Control Valves Mark 79/79MX Three-Way Control Valves. Three-Way Control Valves. Operation. Features Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide

More information

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT 1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof

More information

Item 305D 3-Piece Ball Valve

Item 305D 3-Piece Ball Valve ZIPSON'S 0, -piece high performance ball valve with ISO direct mounting pad is designed for the high pressure industrial pipe line in full port product. To compare the economic valve in the market, Zipson

More information

334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm

334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm High Performance Butterfly Valves to suit API standard lb/00lb Rating A Valve nominal size to 00mm Max.working pressure MPa Working temperature range 0 0 Cast steel Stainless steel.9 5. 9 FS Fire safe

More information

SHORT PATTERN FLANGE BALL VALVES 5000 SERIES

SHORT PATTERN FLANGE BALL VALVES 5000 SERIES SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide

More information

WAFER PATTERN BUTTERFLY TYP Z 011-A

WAFER PATTERN BUTTERFLY TYP Z 011-A WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:

More information

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable. SINCE198 MDI / MDIS Choke Valves Unique. Precise. Quality. Reliable. MDI / MDIS SERIES CHOKE VALVES FEATURES Benefits T aylor Valve MDI / MDIS Series Chokes are made with wear resistant material to extend

More information

Features: Quality Testing and Documentation

Features: Quality Testing and Documentation 1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice

More information

711, 728, 751. Ball Valve, Stainless steel Multi-port

711, 728, 751. Ball Valve, Stainless steel Multi-port Ball Valve, Stainless steel Multi-port Construction GEMÜ 711, 728 and 751 are 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 2 (DN 8 to DN 50). The top flange enables both

More information

M.R.P. Dt

M.R.P. Dt M.R.P LIST Dt. 13.09.2013 "ZOLOTO " Bronze Globe Valve (Screwed). 1001. 8mm 10mm 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 416.00 416.00 416.00 601.00 791.00 1305.00 1723.00 2513.00 4308.00 7174.00

More information

NEOTECHA. PFA lined Ball Valves - Models SNB and SNC

NEOTECHA. PFA lined Ball Valves - Models SNB and SNC NEOTECHA PFA lined stainless steel ball valve with short face to face and well proven trunnion mounted design for use in pharmaceutical and bio-engineering industries Features PFA lining offers highest

More information

1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.

1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A. LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55

More information

SV81H Safety and Relief Valve

SV81H Safety and Relief Valve Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.

More information

708BS Series Bellows Stem Seal

708BS Series Bellows Stem Seal 708BS Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with

More information

TECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17

TECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17 TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.

More information

SMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS

SMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel

More information

304A Wafer 304Q Lugged

304A Wafer 304Q Lugged High erformance Butterfly Valves to Suit I Standard 0 lb Rating om isco R 0 Wafer 0Q ugged 0mm to 00mm 0mm to mm ock ever Worm Gear neumatic Cylinder Motorized Features and Benefits Unique stopper structure

More information

DESIGN BASIS VERIFICATION AND PRESERVICE TESTING CONSIDERATIONS FOR OM CODE MANDATORY APPENDIX III

DESIGN BASIS VERIFICATION AND PRESERVICE TESTING CONSIDERATIONS FOR OM CODE MANDATORY APPENDIX III Proceedings of the ASME/NRC 2017 13th Pump and Valve Symposium PVS2017 July 17-18, 2017, Silver Spring, Maryland PVS2017-3504 DESIGN BASIS VERIFICATION AND PRESERVICE TESTING CONSIDERATIONS FOR OM CODE

More information

Stainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.

Stainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing. Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.

More information

Ball valve Metal. Sectional view. * see information on working medium on page PED/97/23/EC Category III Module H TA-LUFT

Ball valve Metal. Sectional view. * see information on working medium on page PED/97/23/EC Category III Module H TA-LUFT all valve Metal Construction GEMÜ is a 2/2-way stainless steel ball valve with top flange EN ISO 5211 in sizes DN 15 to 100. It has a low maintenance electric actuator with a powerful DC motor. The reduction

More information

Data is only for informational purpose. All specifications are subject to change without notice.

Data is only for informational purpose. All specifications are subject to change without notice. MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV

More information

98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98

98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98 Series Back Pressure and Type Relief VL000 Valves FIELDVUE Valve Link Fisher Controls August Bulletin.: The Series (figure ) is used for back pressure or relief applications in liquid, gas, air, and steam

More information

SPIRAL WOUND GASKET. Spiral Wound Gasket CALVOSEALING DESCRIPTION PROPERTIES

SPIRAL WOUND GASKET. Spiral Wound Gasket CALVOSEALING DESCRIPTION PROPERTIES CALVOSEALING Spiral Wound Gasket SPIRAL WOUND GASKET DESCRIPTION Spiral wound gaskets consist of a V-shaped metal strip spirally wound in combination with a soft, filler material. The metal strip provides

More information

True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe

True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball

More information

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page

More information

Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.

Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media. Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast

More information

700Z JIS. 10K Aluminum Butterfly Valve. Evolution of Long Sellers Sealing performance and Durability Improved! 40 to 300mm

700Z JIS. 10K Aluminum Butterfly Valve. Evolution of Long Sellers Sealing performance and Durability Improved! 40 to 300mm 0K Aluminum Butterfly Valve 0Z Valve nominal size 0 to 00mm Max.working pressure MPa Working temperature range C JIS JIS B 0 Compliant (This product conforms to General Specifications for Machinery and

More information

Standard Circulating Pumps

Standard Circulating Pumps Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Seal-less circulator with flanged connection. Two speed, manually adjustable to match

More information

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling

More information

The 221 Series is designed to provide emergency venting of low pressure storage tanks and vessels.

The 221 Series is designed to provide emergency venting of low pressure storage tanks and vessels. Varec Series The Series is designed to provide emergency venting of low pressure storage tanks and vessels. Introduction When the tank is exposed to abnormal internal pressure or vacuum beyond the capability

More information

RSK. Wafer Type Check Valve. Construction. Features. Advantages

RSK. Wafer Type Check Valve. Construction. Features. Advantages Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges

More information

Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application

Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B

More information

CHECK VALVE CH-1601A (EN)

CHECK VALVE CH-1601A (EN) CH-1A (EN) ABOUT US FBV Inc. is an ISO 001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves

More information

AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO

AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel

More information

~. LOW FLOW Series Bellows Stem Seal. ~ a division of Jordan Valve

~. LOW FLOW Series Bellows Stem Seal. ~ a division of Jordan Valve ~. LOW FLOW 8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with a pressure-tight

More information

Subsea Valves.

Subsea Valves. Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:

More information

C200 VALVE WITH UM ELECTRIC ACTUATOR

C200 VALVE WITH UM ELECTRIC ACTUATOR FEATURES The C200+UM Ball-valves guarantee the function of automatic shut-off of pipes made of PVC-U, PEHD, PP or PVDF. This PN10/16 pressure class valve is used to isolate low-pressure water, acid or

More information

Cast Iron Valves. JIS 5K/10K, Class 125

Cast Iron Valves. JIS 5K/10K, Class 125 Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI

More information

Atlas Copco Airmotors

Atlas Copco Airmotors Atlas Copco Airmotors Atlas Copco air motors Leading the industry in development and innovation. Offering a comprehensive range of standard air motors. A premier supplier of air motors engineered to meet

More information

Pressure Balanced Plug Valve

Pressure Balanced Plug Valve Pressure alanced Plug Valve DESIGN & MNUFCTURE CONFORM IT:PI D/ISO SME. CONNECTION DIMENSION CONFORMS TI:SME. DIN EN 0 FIRE RESISTNCE DESIGN CONFORMS IT:PI 0/ISO 0 INSPECTION & TEST CONFORMS IT:PI D ISO

More information

Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12

More information

Electrical Rotary Drive

Electrical Rotary Drive Stellantriebe Electrical Rotary Drive www.arisactuators.com Synchronous motor technology (AC) or direct current motor () The permanent magnets built into the synchronous motor ensure a high holding torque

More information

Pilot kick type 2 port solenoid valve : Normally closed,normally open GENERAL PURPOSE VALVE ADK11 ADK12 SERIES

Pilot kick type 2 port solenoid valve : Normally closed,normally open GENERAL PURPOSE VALVE ADK11 ADK12 SERIES K11 K1 Series Pilot kick type port solenoid valve : Normally closed,normally open NRL PURPS VLV K11 K1 SRIS iaphragm structure Port size : Rc1/, Rc3/, R1/, R3/, R1 JIS symbol K11(normally closed) UT K1(normally

More information

Taylor Valve Technology, Inc

Taylor Valve Technology, Inc MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES

More information

M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems

M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short

More information

Performance!Nxt Release

Performance!Nxt Release March 05, 2018 Performance!Nxt Release 12.7210 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management

More information

HANKIA. DSV type. Single stage,vertical Axially split case double suction pump

HANKIA. DSV type. Single stage,vertical Axially split case double suction pump DSV type Single stage,vertical Axially split case double suction pump High efficiency and low pulsation Wind performance range with up to 280m head Stable service and low maintenance Heavy duty design

More information

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.

Choke Valves SINCE1958. Unique. Precise. Quality. Reliable. SINCE95 MC SERIES Choke Valves Unique. Precise. Quality. Reliable. MOV Valve Principle of Operation Taylor Valve Technology Multi-Orifice Valve Design Principle Provides Precision Control. The two adjacent

More information

8000 Series Bellows Stem Seal

8000 Series Bellows Stem Seal 8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem

More information

Taylor Valve Technology, Inc

Taylor Valve Technology, Inc MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC

More information

Ball valve C 200 PROP / C 200 DOS

Ball valve C 200 PROP / C 200 DOS Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Characteristics C 00 PROP Proportional ball valve based on the C 00

More information

708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available

708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available 708 Series Fractional Flow Control s fractional flow control valves CRN Registration Number Available The Mark 708 was developed by Jordan to provide the most accurate control available for fractional

More information

Wafer Type Butterfly Valve

Wafer Type Butterfly Valve Rev.B Wafer Type Butterfly Valve Type Summary Butterfly valve actuator type Actuator Type Description Rated Output Force Supply* Control/ Feedback Signal Running Time Weight kg TBV-50-X.V Proportional

More information

GPX 1250 Gas Piston Pump

GPX 1250 Gas Piston Pump GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.

More information

The 5400A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel.

The 5400A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel. Varec 00A Series The 00A Series, Group D, end-of-line flame arrester is designed to prevent the propagation of flames into a storage vessel. Introduction Varec s have been the industry standard for over

More information

Atlas Copco air motors

Atlas Copco air motors Atlas Copco air motors Atlas Copco air motors Leading the industry in development and innovation. Offering a comprehensive range of standard air motors. A premier supplier of air motors engineered to meet

More information

Close-coupled centrifugal pumps

Close-coupled centrifugal pumps CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular

More information

SSV Special Compensating Bypass Check Valve

SSV Special Compensating Bypass Check Valve V 18-0 pecial Compensating Bypass Check Valve ew - 0 ANI 0-0 Δp V R V pecial Compensating Bypass Check Valve V 18-0 (type with integrated non-return valve in the bypass) Range of Applications Compared

More information

Standard Circulating Pumps

Standard Circulating Pumps Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Circulating pumps with flanged connection > Applications: Drinking-water circulation

More information

Type Electrically Actuated 3-way Ball Valves

Type Electrically Actuated 3-way Ball Valves GF Piping Systems Electrically Actuated 3-way Ball Valves Type 167-17 General Size: ⅜ 2 aterial: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPD, FP End Connection: Solvent

More information

Ideal Vacuum Products 5910 Midway Park NE, Albuquerque, NM Our products develop tomorrow s technologies

Ideal Vacuum Products 5910 Midway Park NE, Albuquerque, NM Our products develop tomorrow s technologies Our products develop tomorrow s technologies We are proud of our Ideal Vacuum Super-Seal bellows valves as they are manufactured to meet the highest standards. Our bellows valve design includes a hermetically

More information

Electromechanical pressure switches

Electromechanical pressure switches Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.

More information

Pipe fittings and flanges, sockets for bayonet locks

Pipe fittings and flanges, sockets for bayonet locks Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing

More information

Flaresonic Flow Meter. A single path meter specifically designed for measuring the flaring of natural gas

Flaresonic Flow Meter. A single path meter specifically designed for measuring the flaring of natural gas A single path meter specifically designed for measuring the flaring of natural gas 2 Elster Instromet FlaresonicH 9010702B001 item product code General Meter system Ultrasonic Gas flowmeter Meter model

More information

Grease Guns PRELIxx and PRELIxx PRO

Grease Guns PRELIxx and PRELIxx PRO Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical

More information

D M2500 and 2500 Series 2-Piece Flanged Ball Valve

D M2500 and 2500 Series 2-Piece Flanged Ball Valve EATURE & BENEIT * Comes standard in stainless steel and carbon steel * Investment cast body and end caps * el adjusting stem packing * Blow-out proo stem design * 0% air tested under water at 0 psi * Working

More information

Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet

Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3

More information

Item 305M-METAL SEAT 3-PC Metal Seated Ball Valve

Item 305M-METAL SEAT 3-PC Metal Seated Ball Valve Item 0M-MT ST -P Metal Seated Ball Valve SS 00/ 00/ WOG/ PN SIZ: /"-" ZIPSON'S 0M, -piece high performance metal seated ball valve with ISO direct mounting pad is designed for use in high temperature,

More information

Air Mask PARTS LIST High Pressure

Air Mask PARTS LIST High Pressure Air Mask PARTS LIST High Pressure TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000 pressure demand facepiece NFPA Facepiece Components Facepiece Blank Type Small Medium Large Hycar 00

More information

SERIES 1300 Quality Design Features Assure Long, Trouble-Free Service

SERIES 1300 Quality Design Features Assure Long, Trouble-Free Service SERIES Quality Design Features Assure Long, Trouble-Free Service End Suction WIDE RANGE OF APPLICATIONS: Industrial Process Pollution Control General Pumping Spray Systems Deionized Water Waste Water Clear

More information

Cool Drawer Dual Sensor

Cool Drawer Dual Sensor The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer

More information

NDP-50 Series Specifications

NDP-50 Series Specifications NDP-50 Series Specifications Port Dimensions Intake & discharge connection: Polypropylene (PPG) 2 50mm DIN DN80 PN10 Kynar (PVDF) 2 50mm DIN DN80 PN10 Aluminum (ADC-12) 2 50mm DIN DN80 PN10 (with tapped

More information

4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized.

4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized. Swivel Joints Table of Contents Advantages of using Eaton Swivel Joints 2 Selection Criteria and Product Safety Considerations 3 FS6500 4 Features and Benefits 4 Performance Testing 4 Repair Kit 10 BD5500

More information

Air Mask. Medium Pressure (3000 psi) NFPA Edition Compliant PARTS LIST

Air Mask. Medium Pressure (3000 psi) NFPA Edition Compliant PARTS LIST Air Mask PARTS LIST Medium Pressure (000 psi) NFPA - 00 Edition Compliant TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000 pressure demand facepiece NFPA Facepiece Components Facepiece

More information

BERMAD Buildings & Construction

BERMAD Buildings & Construction ERMD uildings & onstruction Dimensions & eigts NOTES: Dimensions and weigts tables refer to basic valves. Envelope dimensions vary according to valve model. control accessories adds approximately. kg to

More information

VAREC 221 SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS

VAREC 221 SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS VAREC SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS The Series is designed to provide emergency venting of low pressure storage tanks and vessels FEATURES P PV Available in emergency pressure only and

More information

VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES

VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Series 55 Individual mounting Series inline 35 Sealed solenoid enclosure Manual operator 100 200 Ext. pilot port Ext. pilot Pilot filter Pilot exh. 55

More information

SYSTEM COMPONENT SERIES. Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028)

SYSTEM COMPONENT SERIES. Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028) SYSTEM COMPONENT SERIES Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028) CB SERIES The CB stainless steel check valve series is intended

More information

Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout

Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Installation Instructions Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Catalog Numbers 2711-NR5T, 2711P-RAT12E2 Topic Page About This Publication 1 Important User Information 2 About

More information

700G Wafer 704G Full lugged 705G Semi lugged

700G Wafer 704G Full lugged 705G Semi lugged 0 Series Rubber Seated Butterfly Valves for general use 0G Wafer Full lugged Semi lugged ock ever Worm Gear Center Handle neumatic Cylinder Motorized Features and Benefits Rib disc The stainless steel

More information

XDV-UDH UNI-DIRECTIONAL KNIFE GATE VALVES

XDV-UDH UNI-DIRECTIONAL KNIFE GATE VALVES UNI-DIRECTIONL KNIFE GTE VLVES FETURES Special L shaped replaceable seat. Roller bearings in SS housing on all all sizes. Fully lugged to suit S0 CL. Stainless steel stem protection tube included. Gearbox

More information

jamesbury Bulletin B101-2EN Issue 11/2007

jamesbury Bulletin B101-2EN Issue 11/2007 /" " (DN 8 0) ELIMINATOR 00 CWP AND ANSI CLASS 00 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.

More information

VESSEL FUEL MEASUREMENT & MANAGEMENT SYSTEM (VFMMS)

VESSEL FUEL MEASUREMENT & MANAGEMENT SYSTEM (VFMMS) VESSEL FUEL MEASUREMENT & MANAGEMENT SYSTEM (VFMMS) Reference: - June 2012 Kral Fuel Flowmeters History: TECHNICAL APPROACH The Kral Flowmeter was developed over 20 years ago a solution to an internal

More information

Pressed for time? JUST PRESS, CRIMP AND SAVE.

Pressed for time? JUST PRESS, CRIMP AND SAVE. Pressed for time? JUST PRESS, CRIMP AND SAVE. 03/17 Hammond Valve s newly expanded UltraPress line will save you more time than ever. Designed for press-connection systems piping potable water, HVAC and

More information

Spectrum 500D 3/4 gpm Functional Specifications Physical Specifications Standards Spectrum 500D (3 or 4 )

Spectrum 500D 3/4 gpm Functional Specifications Physical Specifications Standards Spectrum 500D (3 or 4 ) The Spectrum Single-Jet Meter is the widest ranged, single measuring element meter available to U.S. utilities. They have been designed to replace maintenance-intensive compound meters and limited range

More information

MAXON SMARTLINK MRV. Intelligent MICRO-RATIO Valve Series. Technical Catalog

MAXON SMARTLINK MRV. Intelligent MICRO-RATIO Valve Series. Technical Catalog MAXON SMARTLINK MRV Intelligent MICRO-RATIO Valve Series Technical Catalog TABLE OF CONTENTS Product description... 1 Features and benefits... 1 Applications... 2 Approvals... 2 Model numbers... 3 Butterfly

More information

Pilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC

Pilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC D11/D1 Series (general purpose valve) D11/D1 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Refer to Ending 17 for more details. JIS symbol Common

More information

High Voltage Induction Motors. 21-MII Series. New High Efficiency Design for High Capacity Applications Up to 3,550 kw (4,750 HP)

High Voltage Induction Motors. 21-MII Series. New High Efficiency Design for High Capacity Applications Up to 3,550 kw (4,750 HP) High Voltage Induction Motors -MII Series New High Efficiency Design for High Capacity Applications Up to,0 kw (,0 HP) MII Series: Combining over 00 years of experience with innovative new technology makes

More information